Merge branch 'master' into master-modernize-signal-slot

.github/workflows/auto-doxygen.yml

@@ -11,7 +11,6 @@ jobs:
     permissions:
        contents: write    
     runs-on: ubuntu-latest
-    if: github.ref == 'refs/heads/master'
     steps:
     - uses: actions/checkout@v4
       with:

CMakeLists.txt

@@ -145,6 +145,34 @@ else()
     )
 endif()
 
+# Optional precompiled headers -- see QET_ENABLE_PCH in
+# cmake/developer_options.cmake for what this trades away.
+#
+# target_precompile_headers() needs CMake 3.16; the project still declares a
+# 3.5 minimum, so guard rather than raise it for an opt-in developer feature.
+#
+# The generator expressions are load-bearing, not decoration: this target also
+# compiles the 18 C files of the bundled LZMA decoder
+# (sources/import/edz/lzma/*.c), and an unguarded list applies to every
+# language in the target, so the Qt headers would reach the C compiler and fail
+# with "unknown type name 'namespace'". $<ANGLE-R> is required because a
+# literal '>' would terminate the generator expression.
+if(QET_ENABLE_PCH)
+    if(CMAKE_VERSION VERSION_LESS 3.16)
+        message(WARNING
+            "QET_ENABLE_PCH needs CMake 3.16 or newer (found ${CMAKE_VERSION}); "
+            "building without precompiled headers.")
+    else()
+        target_precompile_headers(${PROJECT_NAME} PRIVATE
+            "$<$<COMPILE_LANGUAGE:CXX>:<QtCore/QtCore$<ANGLE-R>>"
+            "$<$<COMPILE_LANGUAGE:CXX>:<QtGui/QtGui$<ANGLE-R>>"
+            "$<$<COMPILE_LANGUAGE:CXX>:<QtWidgets/QtWidgets$<ANGLE-R>>"
+            "$<$<COMPILE_LANGUAGE:CXX>:<QtXml/QtXml$<ANGLE-R>>"
+        )
+        message(STATUS "QET_ENABLE_PCH: precompiled headers enabled")
+    endif()
+endif()
+
 target_link_libraries(
     ${PROJECT_NAME}
     PUBLIC

cmake/developer_options.cmake

@@ -33,3 +33,17 @@ add_definitions(-DQT_MESSAGELOGCONTEXT)
 
 # Build with KF5
 option(BUILD_WITH_KF5 "Build with KF5" ON)
+
+# Precompiled headers for the Qt umbrella headers.
+#
+# Off by default and intended for local development only. Building QET is
+# dominated by re-parsing Qt's headers: a 214-line .cpp expands to ~198,000
+# preprocessed lines, and compiling one translation unit costs ~4.1 s of which
+# only ~0.35 s is optimisation (-O0 instead of -O3 saves 8%). A PCH caches the
+# parsed header state and takes that ~4.1 s down to ~1.2 s.
+#
+# It is deliberately NOT on by default: a PCH satisfies includes that a source
+# file forgot to make itself, so code written with it enabled can fail to
+# compile for everyone else. Leaving it off keeps CI and contributors on the
+# strict behaviour, and only developers who opt in trade that for the speed.
+option(QET_ENABLE_PCH "Use precompiled headers (developer build speed; may mask missing #includes)" OFF)

cmake/qet_compilation_vars.cmake

@@ -116,6 +116,16 @@ set(QET_RES_FILES
 set(QET_SRC_FILES
   ${QET_DIR}/sources/cli_export.cpp
   ${QET_DIR}/sources/cli_export.h
+  ${QET_DIR}/sources/logging/crashhandler.cpp
+  ${QET_DIR}/sources/logging/crashhandler.h
+  ${QET_DIR}/sources/logging/eventloopwatchdog.cpp
+  ${QET_DIR}/sources/logging/eventloopwatchdog.h
+  ${QET_DIR}/sources/logging/logring.cpp
+  ${QET_DIR}/sources/logging/logring.h
+  ${QET_DIR}/sources/logging/qetlogger.cpp
+  ${QET_DIR}/sources/logging/qetlogger.h
+  ${QET_DIR}/sources/logging/ui/diagnosticsreportdialog.cpp
+  ${QET_DIR}/sources/logging/ui/diagnosticsreportdialog.h
   ${QET_DIR}/sources/pdf_links.cpp
   ${QET_DIR}/sources/pdf_links.h
   ${QET_DIR}/sources/import/edz/edzarchive.cpp
@@ -205,6 +215,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/exportpropertieswidget.h
   ${QET_DIR}/sources/genericpanel.cpp
   ${QET_DIR}/sources/genericpanel.h
+  ${QET_DIR}/sources/lastusedstyle.cpp
+  ${QET_DIR}/sources/lastusedstyle.h
   ${QET_DIR}/sources/machine_info.cpp
   ${QET_DIR}/sources/machine_info.h
   ${QET_DIR}/sources/main.cpp
@@ -530,7 +542,6 @@ set(QET_SRC_FILES
 
   ${QET_DIR}/sources/richtext/richtexteditor.cpp
   ${QET_DIR}/sources/richtext/richtexteditor_p.h
-  ${QET_DIR}/sources/richtext/ui_addlinkdialog.h
 
   ${QET_DIR}/sources/SearchAndReplace/searchandreplaceworker.cpp
   ${QET_DIR}/sources/SearchAndReplace/searchandreplaceworker.h
@@ -683,6 +694,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/ui/dynamicelementtextitemeditor.h
   ${QET_DIR}/sources/ui/dynamicelementtextmodel.cpp
   ${QET_DIR}/sources/ui/dynamicelementtextmodel.h
+  ${QET_DIR}/sources/ui/customelementinfopartwidget.cpp
+  ${QET_DIR}/sources/ui/customelementinfopartwidget.h
   ${QET_DIR}/sources/ui/elementinfopartwidget.cpp
   ${QET_DIR}/sources/ui/elementinfopartwidget.h
   ${QET_DIR}/sources/ui/elementinfowidget.cpp
@@ -761,6 +774,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/undocommand/movediagramcommand.h
   ${QET_DIR}/sources/undocommand/removediagramcommand.cpp
   ${QET_DIR}/sources/undocommand/removediagramcommand.h
+  ${QET_DIR}/sources/undocommand/setautonumcontextcommand.cpp
+  ${QET_DIR}/sources/undocommand/setautonumcontextcommand.h
   ${QET_DIR}/sources/undocommand/rotateselectioncommand.cpp
   ${QET_DIR}/sources/undocommand/rotateselectioncommand.h
   ${QET_DIR}/sources/undocommand/rotatetextscommand.cpp

qelectrotech.pro

@@ -173,7 +173,9 @@ HEADERS += $$files(sources/*.h) \
            $$files(sources/qet_elementscaler/*.h) \
            $$files(sources/svg/*.h) \
            $$files(sources/import/edz/*.h) \
-           $$files(sources/import/edz/lzma/*.h)
+           $$files(sources/import/edz/lzma/*.h) \
+           $$files(sources/logging/*.h) \
+           $$files(sources/logging/ui/*.h)
 
 SOURCES += $$files(sources/*.cpp) \
            $$files(sources/editor/*.cpp) \
@@ -219,7 +221,10 @@ SOURCES += $$files(sources/*.cpp) \
            $$files(sources/qet_elementscaler/*.cpp) \
            $$files(sources/svg/*.cpp) \
            $$files(sources/import/edz/*.cpp) \
-           $$files(sources/import/edz/lzma/*.c)
+           $$files(sources/import/edz/lzma/*.c) \
+           $$files(sources/logging/*.cpp) \
+           $$files(sources/logging/ui/*.cpp)
+
 
 # Needed for use promote QTreeWidget in terminalstripeditor.ui
 INCLUDEPATH += sources/TerminalStrip/ui

sources/ElementsCollection/fileelementcollectionitem.cpp

@@ -22,7 +22,39 @@
 #include "../qeticons.h"
 #include "elementslocation.h"
 
+#include <QApplication>
 #include <QDir>
+#include <QPainter>
+#include <QPixmap>
+#include <QStyle>
+
+namespace {
+	/**
+		@return the folder icon overlaid with a small warning badge in the
+		bottom-right corner. Used for a directory whose qet_directory could
+		not be read (@see FileElementCollectionItem::m_qet_directory_unreadable),
+		so the problem is visible in the tree itself and not only on hover
+		via the tooltip. Built once: same folder icon, same badge, every time.
+	*/
+	const QIcon &unreadableFolderIcon()
+	{
+		static const QIcon icon = []() {
+			QPixmap pixmap = QET::Icons::Folder.pixmap(16, 16);
+			const QPixmap badge = QApplication::style()
+				->standardIcon(QStyle::SP_MessageBoxWarning)
+				.pixmap(9, 9);
+
+			QPainter painter(&pixmap);
+			painter.drawPixmap(pixmap.width() - badge.width(),
+					    pixmap.height() - badge.height(),
+					    badge);
+			painter.end();
+
+			return QIcon(pixmap);
+		}();
+		return icon;
+	}
+}
 
 /**
 	@brief FileElementCollectionItem::FileElementCollectionItem
@@ -136,6 +168,14 @@ QString FileElementCollectionItem::localName()
 		}
 		else
 		{
+			// Fall back to the raw directory name (m_path) whenever the
+			// translated name can't be obtained -- qet_directory missing,
+			// unreadable (e.g. a Windows path-encoding issue with special
+			// characters, see bugtracker #332), malformed, or present but
+			// without a usable name entry -- rather than leaving the item
+			// blank.
+			QString display_name;
+			bool readable = false;
 			QString str(fileSystemPath() % "/qet_directory");
 			pugi::xml_document docu;
 			if (docu.load_file(str.toStdWString().c_str()))
@@ -143,11 +183,26 @@ QString FileElementCollectionItem::localName()
 				if (QString(docu.document_element().name())
 					== "qet-directory")
 				{
+					readable = true;
 					NamesList nl;
 					nl.fromXml(docu.document_element());
-					setText(nl.name());
+						// Deliberately no fallback argument: a non-empty one
+						// is returned *before* NamesList::name() reaches its
+						// "first available translation" step, so passing
+						// m_path here would replace a perfectly good name in
+						// some other language with the raw directory name.
+						// The fallback belongs after the chain, not inside it.
+					display_name = nl.name();
 				}
 			}
+			setText(display_name.isEmpty() ? m_path : display_name);
+
+				// Only a file-level failure counts: a readable qet-directory
+				// with no entry for the current language is not an error,
+				// NamesList::name() resolves that on its own. Recorded here
+				// and reported by setUpData(), which sets the tooltip after
+				// this runs.
+			m_qet_directory_unreadable = !readable;
 		}
 	}
 	else if (isElement()) {
@@ -350,7 +405,21 @@ void FileElementCollectionItem::setUpData()
 		}
 	}
 
-	setToolTip(collectionPath());
+		// Falling back to the raw directory name keeps the folder usable, but
+		// on its own it hides the fact that a file is broken: the user sees a
+		// plausible name and never learns there is anything to repair. Say so
+		// above the collection path, which stays as the last line the way the
+		// element tooltip above builds it.
+	QStringList tip;
+	if (isDir() && m_qet_directory_unreadable)
+	{
+		tip << QObject::tr("Le fichier « %1 » est absent ou illisible : "
+				   "le nom traduit de ce dossier n'a pas pu être lu, "
+				   "son nom de dossier est affiché à la place.")
+		       .arg(fileSystemPath() % "/qet_directory");
+	}
+	tip << collectionPath();
+	setToolTip(tip.join(QLatin1Char('\n')));
 }
 
 /**
@@ -361,6 +430,19 @@ void FileElementCollectionItem::setUpData()
  */
 void FileElementCollectionItem::setUpIcon()
 {
+		// Must return unconditionally once an icon is set: setIcon() calls
+		// setData(), which emits dataChanged() regardless of whether the new
+		// icon differs from the old one (QIcon has no meaningful equality).
+		// QTreeView responds to dataChanged() by recomputing the row's size
+		// hint, which re-enters data() for this same index -- so without this
+		// guard, any repeated setIcon() here recurses until the stack
+		// overflows. Confirmed by crash report on PR #633.
+		//
+		// This item's m_qet_directory_unreadable is already final by the time
+		// this can run at all: ElementsCollectionModel only attaches itself
+		// to the tree view (making data() reachable) from loadingFinished(),
+		// which fires after the QtConcurrent::map over every item -- this one
+		// included -- has completed. So there is no race to work around here.
 	if (!icon().isNull())
 		return;
 
@@ -380,7 +462,8 @@ void FileElementCollectionItem::setUpIcon()
 	else
 	{
 		if (isDir()) {
-			setIcon(QET::Icons::Folder);
+			setIcon(m_qet_directory_unreadable ? unreadableFolderIcon()
+							    : QET::Icons::Folder);
 		} else {
 			if (m_path.endsWith(".qetmak")) {
 				setIcon(QIcon());

sources/ElementsCollection/fileelementcollectionitem.h

@@ -64,6 +64,11 @@ class FileElementCollectionItem : public ElementCollectionItem
 
 	private:
 		QString m_path;
+			/// True when this directory's qet_directory file is missing or
+			/// unreadable, so setUpData() can say so in the tooltip. Recorded
+			/// rather than acted on in localName(), because setUpData() resets
+			/// the tooltip afterwards and would otherwise discard it.
+		bool m_qet_directory_unreadable = false;
 };
 
 #endif // FILEELEMENTCOLLECTIONITEM2_H

sources/autoNum/numerotationcontext.cpp

@@ -220,6 +220,24 @@ void NumerotationContext::replaceValue(int index, QString content) {
 	content_[index] = type + "|" + value + "|" + increase + "|" + initvalue + "|" + modulus + "|" + format;
 }
 
+/**
+	@brief NumerotationContext::replaceIncrease
+	Change how much this part advances per step, leaving its current value,
+	initial value, modulus and format untouched. Sibling to replaceValue(),
+	which deliberately never touches this field.
+	@param index of NC item
+	@param increase new increase for that item
+*/
+void NumerotationContext::replaceIncrease(int index, int increase) {
+	QStringList strl = content_[index].split("|");
+	QString type = strl.at(0);
+	QString value = strl.at(1);
+	QString initvalue = strl.at(3);
+	QString modulus = strl.size() > 4 ? strl.at(4) : QStringLiteral("0");
+	QString format  = strl.size() > 5 ? strl.at(5) : QString();
+	content_[index] = type + "|" + value + "|" + QString::number(increase) + "|" + initvalue + "|" + modulus + "|" + format;
+}
+
 /**
 	@brief NumerotationContext::formatOf
 	@param item : a context item as returned by itemAt()
@@ -230,3 +248,30 @@ QString NumerotationContext::formatOf(const QStringList &item)
 {
 	return item.size() > 5 ? item.at(5) : QString();
 }
+
+/**
+	@brief NumerotationContext::formatValue
+	@param item : a context item as returned by itemAt()
+	@return the part's value, zero-padded exactly as
+	autonum::setSequentialToList() pads it when composing a real label: an
+	explicit format mask wins, then "ten"/"hundred" parts get their
+	implicit 2/3-digit width, "alpha" is used as-is, everything else is a
+	plain number. Kept in step with that function by hand since the two
+	cannot share code without exposing an assignvariables.cpp-local helper.
+*/
+QString NumerotationContext::formatValue(const QStringList &item)
+{
+	const QString &type = item.at(0);
+	const QString &value = item.at(1);
+	if (type == QLatin1String("alpha"))
+		return value;
+
+	const QString mask = formatOf(item);
+	if (!mask.isEmpty())
+		return QString("%1").arg(value.toInt(), mask.length(), 10, QChar('0'));
+	if (type == QLatin1String("ten") || type == QLatin1String("tenfolio"))
+		return QString("%1").arg(value.toInt(), 2, 10, QChar('0'));
+	if (type == QLatin1String("hundred") || type == QLatin1String("hundredfolio"))
+		return QString("%1").arg(value.toInt(), 3, 10, QChar('0'));
+	return QString::number(value.toInt());
+}

sources/autoNum/numerotationcontext.h

@@ -54,6 +54,11 @@ class NumerotationContext
 	QDomElement toXml(QDomDocument &, const QString&);
 	void fromXml(QDomElement &);
 	void replaceValue(int, QString);
+	void replaceIncrease(int, int);
+		/// Zero-pad a part's value the same way the real numbering engine
+		/// does (autonum::setSequentialToList in assignvariables.cpp), so a
+		/// UI preview of a part's value matches what actually gets rendered.
+	static QString formatValue(const QStringList &item);
 
 	private:
 	QStringList content_;

sources/autoNum/ui/autonumberingdockwidget.cpp

@@ -24,10 +24,13 @@
 #include "../../titleblockproperties.h"
 #include "../../ui/projectpropertiesdialog.h"
 #include "../numerotationcontext.h"
+#include "../numerotationcontextcommands.h"
 #include "ui_autonumberingdockwidget.h"
 
 #include <QComboBox>
 #include <QLineEdit>
+#include <QSignalBlocker>
+#include <QSpinBox>
 
 /**
 	@brief AutoNumberingDockWidget::AutoNumberingDockWidget
@@ -64,6 +67,29 @@ void AutoNumberingDockWidget::clear()
 	ui->m_conductor_value_le->clear();
 	ui->m_element_value_le->clear();
 	ui->m_folio_value_le->clear();
+	ui->m_conductor_next_le->clear();
+	ui->m_element_next_le->clear();
+	ui->m_folio_next_le->clear();
+}
+
+/**
+	@brief AutoNumberingDockWidget::rowFor
+	@return the combo/value/increase/next widgets that make up category's row.
+*/
+AutoNumberingDockWidget::Row AutoNumberingDockWidget::rowFor(AutoNumCategory category) const
+{
+	switch (category) {
+		case AutoNumCategory::Conductor:
+			return {ui->m_conductor_cb, ui->m_conductor_value_le,
+				ui->m_conductor_increase_sb, ui->m_conductor_next_le};
+		case AutoNumCategory::Element:
+			return {ui->m_element_cb, ui->m_element_value_le,
+				ui->m_element_increase_sb, ui->m_element_next_le};
+		case AutoNumCategory::Folio:
+			return {ui->m_folio_cb, ui->m_folio_value_le,
+				ui->m_folio_increase_sb, ui->m_folio_next_le};
+	}
+	return {nullptr, nullptr, nullptr, nullptr};
 }
 
 void AutoNumberingDockWidget::projectClosed()
@@ -177,9 +203,9 @@ void AutoNumberingDockWidget::setContext()
 
 		//The combo boxes have just been repopulated, so the value fields next
 		//to them are showing whatever the previous project left there.
-	refreshValueField(ui->m_conductor_cb, ui->m_conductor_value_le, AutoNumCategory::Conductor);
-	refreshValueField(ui->m_element_cb, ui->m_element_value_le, AutoNumCategory::Element);
-	refreshValueField(ui->m_folio_cb, ui->m_folio_value_le, AutoNumCategory::Folio);
+	refreshRow(AutoNumCategory::Conductor);
+	refreshRow(AutoNumCategory::Element);
+	refreshRow(AutoNumCategory::Folio);
 
 	this->setActive();
 }
@@ -255,7 +281,7 @@ void AutoNumberingDockWidget::on_m_conductor_cb_activated(int)
 	m_project->setCurrentConductorAutoNum(current_autonum);
 	m_project_view->currentDiagram()->diagram()->setConductorsAutonumName(current_autonum);
 	m_project_view->currentDiagram()->diagram()->loadCndFolioSeq();
-	refreshValueField(ui->m_conductor_cb, ui->m_conductor_value_le, AutoNumCategory::Conductor);
+	refreshRow(AutoNumCategory::Conductor);
 }
 
 /**
@@ -284,7 +310,7 @@ void AutoNumberingDockWidget::on_m_element_cb_activated(int)
 {
 	m_project->setCurrrentElementAutonum(ui->m_element_cb->currentText());
 	m_project_view->currentDiagram()->diagram()->loadElmtFolioSeq();
-	refreshValueField(ui->m_element_cb, ui->m_element_value_le, AutoNumCategory::Element);
+	refreshRow(AutoNumCategory::Element);
 }
 
 /**
@@ -324,7 +350,8 @@ void AutoNumberingDockWidget::on_m_folio_cb_activated(int) {
 	if (m_project_view && m_project_view->currentDiagram()) {
 		m_project_view->currentDiagram()->diagram()->border_and_titleblock.importTitleBlock(ip);
 	}
-	refreshValueField(ui->m_folio_cb, ui->m_folio_value_le, AutoNumCategory::Folio);
+emit(folioAutoNumChanged(current_autonum));
+	refreshRow(AutoNumCategory::Folio);
 }
 
 void AutoNumberingDockWidget::on_m_configure_pb_clicked()
@@ -367,6 +394,21 @@ void AutoNumberingDockWidget::on_m_folio_value_le_editingFinished()
 	applyValueField(ui->m_folio_cb, ui->m_folio_value_le, AutoNumCategory::Folio);
 }
 
+void AutoNumberingDockWidget::on_m_conductor_increase_sb_valueChanged(int)
+{
+	applyIncreaseField(ui->m_conductor_cb, ui->m_conductor_increase_sb, AutoNumCategory::Conductor);
+}
+
+void AutoNumberingDockWidget::on_m_element_increase_sb_valueChanged(int)
+{
+	applyIncreaseField(ui->m_element_cb, ui->m_element_increase_sb, AutoNumCategory::Element);
+}
+
+void AutoNumberingDockWidget::on_m_folio_increase_sb_valueChanged(int)
+{
+	applyIncreaseField(ui->m_folio_cb, ui->m_folio_increase_sb, AutoNumCategory::Folio);
+}
+
 /**
 	@brief AutoNumberingDockWidget::contextFor
 	@return the numerotation context named by combo_box, for category
@@ -433,17 +475,21 @@ int AutoNumberingDockWidget::counterIndex(const NumerotationContext &context)
 */
 void AutoNumberingDockWidget::refreshValueFields()
 {
-		//Leave alone a field the user is typing in: numbering an element
-		//refreshes all three, and overwriting a half-typed value under the
-		//cursor is worse than showing it a moment out of date. Only this
-		//automatic path skips; an explicit refresh after a reset or an edit
-		//still writes, so the field always ends up canonical.
-	if (!ui->m_conductor_value_le->hasFocus())
-		refreshValueField(ui->m_conductor_cb, ui->m_conductor_value_le, AutoNumCategory::Conductor);
-	if (!ui->m_element_value_le->hasFocus())
-		refreshValueField(ui->m_element_cb, ui->m_element_value_le, AutoNumCategory::Element);
-	if (!ui->m_folio_value_le->hasFocus())
-		refreshValueField(ui->m_folio_cb, ui->m_folio_value_le, AutoNumCategory::Folio);
+		//Leave alone a row the user is typing in: numbering an element
+		//refreshes all three rows, and overwriting a half-typed value or
+		//increment under the cursor is worse than showing it a moment out
+		//of date. Only this automatic path skips; an explicit refresh after
+		//a reset or an edit still writes, so the row always ends up
+		//canonical. The next-value preview has no such guard: it is
+		//read-only, so there is nothing a refresh could clobber.
+	for (AutoNumCategory category : {AutoNumCategory::Conductor,
+					 AutoNumCategory::Element,
+					 AutoNumCategory::Folio})
+	{
+		const Row row = rowFor(category);
+		if (!row.value->hasFocus() && !row.increase->hasFocus())
+			refreshRow(category);
+	}
 }
 
 /**
@@ -485,13 +531,114 @@ void AutoNumberingDockWidget::applyValueField(QComboBox *combo_box, QLineEdit *l
 	const QString typed = line_edit->text();
 	if (typed.isEmpty() || typed == context.itemAt(index).at(1))
 	{
-		refreshValueField(combo_box, line_edit, category);
+		refreshRow(category);
 		return;
 	}
 
 	context.replaceValue(index, typed);
 	storeContext(combo_box, category, context);
-	refreshValueField(combo_box, line_edit, category);
+	refreshRow(category);
+}
+
+/**
+	@brief AutoNumberingDockWidget::refreshIncreaseField
+	Show the counter's current step size (bug #331: previously only
+	reachable from the full configuration dialog, via "Configurer").
+*/
+void AutoNumberingDockWidget::refreshIncreaseField(QComboBox *combo_box, QSpinBox *increase_sb, AutoNumCategory category)
+{
+		//QSpinBox::setValue() emits valueChanged() even when called
+		//programmatically. Without blocking it, this refresh would
+		//immediately re-trigger on_..._increase_sb_valueChanged() ->
+		//applyIncreaseField() -> storeContext() -> the project's
+		//autoNumContextUpdated signal -> refreshValueFields() -> back here.
+	const QSignalBlocker blocker(increase_sb);
+	if (!m_project || combo_box->currentText().isEmpty())
+	{
+		increase_sb->setEnabled(false);
+		increase_sb->setValue(increase_sb->minimum());
+		return;
+	}
+
+	const NumerotationContext context = contextFor(combo_box, category);
+	const int index = counterIndex(context);
+	increase_sb->setEnabled(index >= 0);
+	increase_sb->setValue(index >= 0 ? context.itemAt(index).at(2).toInt()
+					 : increase_sb->minimum());
+}
+
+/**
+	@brief AutoNumberingDockWidget::applyIncreaseField
+	Write the spin box's step size to the counter it displays (bug #331).
+*/
+void AutoNumberingDockWidget::applyIncreaseField(QComboBox *combo_box, QSpinBox *increase_sb, AutoNumCategory category)
+{
+	if (!m_project || combo_box->currentText().isEmpty())
+		return;
+
+	NumerotationContext context = contextFor(combo_box, category);
+	const int index = counterIndex(context);
+	if (index < 0)
+		return;
+
+	if (increase_sb->value() == context.itemAt(index).at(2).toInt())
+		return;
+
+	context.replaceIncrease(index, increase_sb->value());
+	storeContext(combo_box, category, context);
+	refreshRow(category);
+}
+
+/**
+	@brief AutoNumberingDockWidget::refreshNextField
+	Show what this counter will read after one more step (bug #331: "visualiser
+	la prochaine numérotation qui sera appliquée"). Advances a copy of the
+	whole context through NumerotationContextCommands -- the same engine the
+	Suivant button in the full configuration dialog uses to step a context --
+	so wrap-and-carry into this part from a following part, or out of it into
+	a preceding one, comes out identical to what will actually happen when the
+	number is next consumed.
+*/
+void AutoNumberingDockWidget::refreshNextField(QComboBox *combo_box, QLineEdit *next_edit, AutoNumCategory category)
+{
+	if (!m_project || combo_box->currentText().isEmpty())
+	{
+		next_edit->clear();
+		next_edit->setEnabled(false);
+		return;
+	}
+
+	const NumerotationContext context = contextFor(combo_box, category);
+	const int index = counterIndex(context);
+	if (index < 0)
+	{
+		next_edit->clear();
+		next_edit->setEnabled(false);
+		return;
+	}
+
+	Diagram *diagram = (m_project_view && m_project_view->currentDiagram())
+				    ? m_project_view->currentDiagram()->diagram()
+				    : nullptr;
+	NumerotationContextCommands ncc(context, diagram);
+	const NumerotationContext next_context = ncc.next();
+
+	next_edit->setEnabled(true);
+	next_edit->setText(NumerotationContext::formatValue(next_context.itemAt(index)));
+}
+
+/**
+	@brief AutoNumberingDockWidget::refreshRow
+	Refresh a category's value, increment and next-value preview together --
+	every call site that used to refresh just the value field needs the
+	other two kept in step with it as well.
+*/
+void AutoNumberingDockWidget::refreshRow(AutoNumCategory category)
+{
+	const Row row = rowFor(category);
+	refreshValueField(row.combo, row.value, category);
+	refreshIncreaseField(row.combo, row.increase, category);
+	refreshNextField(row.combo, row.next, category);
 }
 
 /**
@@ -535,10 +682,5 @@ void AutoNumberingDockWidget::resetAutoNum(QComboBox *combo_box, AutoNumCategory
 	}
 
 	storeContext(combo_box, category, context);
-
-	switch (category) {
-		case AutoNumCategory::Conductor: refreshValueField(combo_box, ui->m_conductor_value_le, category); break;
-		case AutoNumCategory::Element:   refreshValueField(combo_box, ui->m_element_value_le, category);   break;
-		case AutoNumCategory::Folio:     refreshValueField(combo_box, ui->m_folio_value_le, category);     break;
-	}
+	refreshRow(category);
 }

sources/autoNum/ui/autonumberingdockwidget.h

@@ -25,6 +25,7 @@
 
 class QComboBox;
 class QLineEdit;
+class QSpinBox;
 
 namespace Ui {
 	class AutoNumberingDockWidget;
@@ -66,10 +67,28 @@ class AutoNumberingDockWidget : public QDockWidget
 		void on_m_element_value_le_editingFinished();
 		void on_m_folio_value_le_editingFinished();
 
+		void on_m_conductor_increase_sb_valueChanged(int);
+		void on_m_element_increase_sb_valueChanged(int);
+		void on_m_folio_increase_sb_valueChanged(int);
+
+	signals:
+		void folioAutoNumChanged(QString);
 
 	private:
 		enum class AutoNumCategory { Conductor, Element, Folio };
 
+			/// The four widgets that make up one category's row, bundled so
+			/// refreshRow() can be called with just a category instead of
+			/// four pointers that must always be passed in matching sets.
+		struct Row
+		{
+			QComboBox *combo;
+			QLineEdit *value;
+			QSpinBox  *increase;
+			QLineEdit *next;
+		};
+		Row rowFor(AutoNumCategory category) const;
+
 		/**
 			@brief resetAutoNum
 			Reset the numerotation context currently selected in combo_box
@@ -91,6 +110,23 @@ class AutoNumberingDockWidget : public QDockWidget
 		void refreshValueField(QComboBox *combo_box, QLineEdit *line_edit, AutoNumCategory category);
 		void applyValueField(QComboBox *combo_box, QLineEdit *line_edit, AutoNumCategory category);
 
+			/// Refresh/apply the increment spin box the same way.
+		void refreshIncreaseField(QComboBox *combo_box, QSpinBox *increase_sb, AutoNumCategory category);
+		void applyIncreaseField(QComboBox *combo_box, QSpinBox *increase_sb, AutoNumCategory category);
+
+			/// Show what the counter will read after one more step, using
+			/// the same NumerotationContextCommands engine the Suivant
+			/// button in the full configuration dialog already advances
+			/// the whole context with -- so the preview can never disagree
+			/// with what actually happens when the number is next consumed.
+		void refreshNextField(QComboBox *combo_box, QLineEdit *next_edit, AutoNumCategory category);
+
+			/// Refresh a whole row -- value, increment and next-value
+			/// preview -- in one call. Every refresh call site needs the
+			/// increment and preview kept in step with the value now, so
+			/// this replaces refreshValueField() at each of them.
+		void refreshRow(AutoNumCategory category);
+
 		Ui::AutoNumberingDockWidget *ui;
 		QETProject* m_project = nullptr;
 		ProjectView* m_project_view = nullptr;

sources/autoNum/ui/autonumberingdockwidget.ui

@@ -15,6 +15,36 @@
   </property>
   <widget class="QWidget" name="dockWidgetContents">
    <layout class="QGridLayout" name="gridLayout">
+    <item row="0" column="3">
+     <widget class="QLabel" name="value_header_label">
+      <property name="text">
+       <string>Valeur</string>
+      </property>
+      <property name="alignment">
+       <set>Qt::AlignCenter</set>
+      </property>
+     </widget>
+    </item>
+    <item row="0" column="4">
+     <widget class="QLabel" name="increase_header_label">
+      <property name="text">
+       <string>Incrément</string>
+      </property>
+      <property name="alignment">
+       <set>Qt::AlignCenter</set>
+      </property>
+     </widget>
+    </item>
+    <item row="0" column="5">
+     <widget class="QLabel" name="next_header_label">
+      <property name="text">
+       <string>Suivant</string>
+      </property>
+      <property name="alignment">
+       <set>Qt::AlignCenter</set>
+      </property>
+     </widget>
+    </item>
     <item row="3" column="1">
      <widget class="QComboBox" name="m_element_cb"/>
     </item>
@@ -61,6 +91,47 @@
       </property>
      </widget>
     </item>
+    <item row="2" column="4">
+     <widget class="QSpinBox" name="m_conductor_increase_sb">
+      <property name="maximumSize">
+       <size>
+        <width>55</width>
+        <height>16777215</height>
+       </size>
+      </property>
+      <property name="toolTip">
+       <string>Incrément : valeur ajoutée au compteur à chaque nouvelle numérotation</string>
+      </property>
+      <property name="alignment">
+       <set>Qt::AlignCenter</set>
+      </property>
+      <property name="accelerated">
+       <bool>true</bool>
+      </property>
+      <property name="minimum">
+       <number>0</number>
+      </property>
+     </widget>
+    </item>
+    <item row="2" column="5">
+     <widget class="QLineEdit" name="m_conductor_next_le">
+      <property name="maximumSize">
+       <size>
+        <width>70</width>
+        <height>16777215</height>
+       </size>
+      </property>
+      <property name="toolTip">
+       <string>Prochaine valeur qui sera appliquée avec cet incrément</string>
+      </property>
+      <property name="readOnly">
+       <bool>true</bool>
+      </property>
+      <property name="alignment">
+       <set>Qt::AlignCenter</set>
+      </property>
+     </widget>
+    </item>
     <item row="3" column="0">
      <widget class="QLabel" name="label">
       <property name="text">
@@ -108,6 +179,47 @@
       </property>
      </widget>
     </item>
+    <item row="3" column="4">
+     <widget class="QSpinBox" name="m_element_increase_sb">
+      <property name="maximumSize">
+       <size>
+        <width>55</width>
+        <height>16777215</height>
+       </size>
+      </property>
+      <property name="toolTip">
+       <string>Incrément : valeur ajoutée au compteur à chaque nouvelle numérotation</string>
+      </property>
+      <property name="alignment">
+       <set>Qt::AlignCenter</set>
+      </property>
+      <property name="accelerated">
+       <bool>true</bool>
+      </property>
+      <property name="minimum">
+       <number>0</number>
+      </property>
+     </widget>
+    </item>
+    <item row="3" column="5">
+     <widget class="QLineEdit" name="m_element_next_le">
+      <property name="maximumSize">
+       <size>
+        <width>70</width>
+        <height>16777215</height>
+       </size>
+      </property>
+      <property name="toolTip">
+       <string>Prochaine valeur qui sera appliquée avec cet incrément</string>
+      </property>
+      <property name="readOnly">
+       <bool>true</bool>
+      </property>
+      <property name="alignment">
+       <set>Qt::AlignCenter</set>
+      </property>
+     </widget>
+    </item>
     <item row="4" column="1">
      <widget class="QComboBox" name="m_folio_cb"/>
     </item>
@@ -144,6 +256,47 @@
       </property>
      </widget>
     </item>
+    <item row="4" column="4">
+     <widget class="QSpinBox" name="m_folio_increase_sb">
+      <property name="maximumSize">
+       <size>
+        <width>55</width>
+        <height>16777215</height>
+       </size>
+      </property>
+      <property name="toolTip">
+       <string>Incrément : valeur ajoutée au compteur à chaque nouvelle numérotation</string>
+      </property>
+      <property name="alignment">
+       <set>Qt::AlignCenter</set>
+      </property>
+      <property name="accelerated">
+       <bool>true</bool>
+      </property>
+      <property name="minimum">
+       <number>0</number>
+      </property>
+     </widget>
+    </item>
+    <item row="4" column="5">
+     <widget class="QLineEdit" name="m_folio_next_le">
+      <property name="maximumSize">
+       <size>
+        <width>70</width>
+        <height>16777215</height>
+       </size>
+      </property>
+      <property name="toolTip">
+       <string>Prochaine valeur qui sera appliquée avec cet incrément</string>
+      </property>
+      <property name="readOnly">
+       <bool>true</bool>
+      </property>
+      <property name="alignment">
+       <set>Qt::AlignCenter</set>
+      </property>
+     </widget>
+    </item>
     <item row="6" column="0">
      <spacer name="verticalSpacer">
       <property name="orientation">

sources/conductorautonumerotation.cpp

@@ -24,6 +24,7 @@
 #include "qet.h"
 #include "qetdiagrameditor.h"
 #include "ui/potentialselectordialog.h"
+#include "undocommand/setautonumcontextcommand.h"
 
 /**
 	@brief ConductorAutoNumerotation::ConductorAutoNumerotation
@@ -156,7 +157,16 @@ void ConductorAutoNumerotation::newProperties(
 	autonum::setSequential(formula, seq, context, diagram, autoNum_name);
 
 	NumerotationContextCommands ncc (context, diagram);
-	diagram->project()->addConductorAutoNum(autoNum_name, ncc.next());
+	NumerotationContext new_context = ncc.next();
+
+	QETProject *project = diagram->project();
+	auto *undo = new SetAutoNumContextCommand(
+			[project](const QString &k, const NumerotationContext &c) {project->addConductorAutoNum(k, c);},
+			autoNum_name,
+			context,
+			new_context);
+	undo->setText(QObject::tr("Numéroter automatiquement un conducteur", "undo caption"));
+	diagram->undoStack().push(undo);
 }
 
 /**
@@ -245,7 +255,21 @@ void ConductorAutoNumerotation::numerateNewConductor()
 							   autoNum_name);
 
 		NumerotationContextCommands ncc (context, m_diagram);
-		m_diagram->project()->addConductorAutoNum(autoNum_name, ncc.next());
+		NumerotationContext new_context = ncc.next();
+
+		QETProject *project = m_diagram->project();
+		auto setter = [project](const QString &k, const NumerotationContext &c) {project->addConductorAutoNum(k, c);};
+
+		if (m_parent_undo)
+		{
+			new SetAutoNumContextCommand(setter, autoNum_name, context, new_context, m_parent_undo);
+		}
+		else
+		{
+			auto *undo = new SetAutoNumContextCommand(setter, autoNum_name, context, new_context);
+			undo->setText(QObject::tr("Numéroter automatiquement un conducteur", "undo caption"));
+			m_diagram->undoStack().push(undo);
+		}
 	}
 
 	applyText(autonum::AssignVariables::formulaToLabel(

sources/diagram.cpp

@@ -67,6 +67,7 @@ Diagram::Diagram(QETProject *project) :
 	m_project                (project),
 	use_border_              (true),
 	draw_terminals_          (true),
+	draw_terminal_names_     (true),
 	draw_colored_conductors_ (true),
 	m_event_interface        (nullptr),
 	m_freeze_new_elements    (false),
@@ -2319,6 +2320,7 @@ ExportProperties Diagram::applyProperties(
 	old_properties.draw_border = border_and_titleblock.borderIsDisplayed();
 	old_properties.draw_titleblock = border_and_titleblock.titleBlockIsDisplayed();
 	old_properties.draw_terminals          = drawTerminals();
+	old_properties.draw_terminal_names     = drawTerminalNames();
 	old_properties.draw_colored_conductors = drawColoredConductors();
 	old_properties.exported_area = useBorder() ? QET::BorderArea
 						   : QET::ElementsArea;
@@ -2327,6 +2329,7 @@ ExportProperties Diagram::applyProperties(
 	// applique les nouvelles options de rendu
 	setUseBorder             (new_properties.exported_area == QET::BorderArea);
 	setDrawTerminals         (new_properties.draw_terminals);
+	setDrawTerminalNames     (new_properties.draw_terminal_names);
 	setDrawColoredConductors (new_properties.draw_colored_conductors);
 	setDisplayGrid           (new_properties.draw_grid);
 	setDisplayGuides         (new_properties.draw_guides);
@@ -2397,9 +2400,24 @@ QPointF Diagram::snapToGrid(const QPointF &p)
 	\~French true pour afficher les bornes, false sinon
 */
 void Diagram::setDrawTerminals(bool dt) {
+	draw_terminals_ = dt;
 	foreach(QGraphicsItem *qgi, items()) {
 		if (Terminal *t = qgraphicsitem_cast<Terminal *>(qgi)) {
-			t -> setVisible(dt);
+			t -> update();
+		}
+	}
+}
+
+/**
+	@brief Diagram::setDrawTerminalNames
+	Defines whether or not to display the terminal names/labels
+	@param dt : true to display the terminal names, false otherwise
+*/
+void Diagram::setDrawTerminalNames(bool dt) {
+	draw_terminal_names_ = dt;
+	foreach(QGraphicsItem *qgi, items()) {
+		if (Terminal *t = qgraphicsitem_cast<Terminal *>(qgi)) {
+			t -> update();
 		}
 	}
 }

sources/diagram.h

@@ -127,6 +127,7 @@ class Diagram : public QGraphicsScene
 		bool draw_guides_;
 		QList<Diagram::Guide> m_guides_list;
 		bool draw_terminals_;
+		bool draw_terminal_names_;
 		bool draw_colored_conductors_;
 
 		QString m_conductors_autonum_name;
@@ -226,6 +227,8 @@ class Diagram : public QGraphicsScene
 	
 		bool drawTerminals() const;
 		void setDrawTerminals(bool);
+		bool drawTerminalNames() const;
+		void setDrawTerminalNames(bool);
 		bool drawColoredConductors() const;
 		void setDrawColoredConductors(bool);
 	
@@ -426,6 +429,15 @@ inline bool Diagram::drawTerminals() const
 	return(draw_terminals_);
 }
 
+/**
+	@brief Diagram::drawTerminalNames
+	@return true if terminal names are rendered, false otherwise
+*/
+inline bool Diagram::drawTerminalNames() const
+{
+	return(draw_terminal_names_);
+}
+
 /**
 	@brief Diagram::drawColoredConductors
 	@return true if conductors colors are rendered, false otherwise.

sources/diagramevent/diagrameventaddelement.cpp

@@ -20,11 +20,44 @@
 #include "../conductorautonumerotation.h"
 #include "../diagram.h"
 #include "../undocommand/addgraphicsobjectcommand.h"
+#include "../undocommand/deleteqgraphicsitemcommand.h"
 #include "../factory/elementfactory.h"
 #include "../qetapp.h"
 #include "../qetdiagrameditor.h"
 #include "../qetgraphicsitem/element.h"
 #include "../qetgraphicsitem/conductor.h"
+#include "../qetgraphicsitem/terminal.h"
+#include "../qet.h"
+#include <QPainterPath>
+#include <limits>
+
+namespace {
+	/**
+		@brief distanceToSegment
+		@param point : point to measure from
+		@param segment : the finite segment (not the infinite line through it)
+		@return the distance from @a point to the closest point actually on
+		@a segment. Unlike QET::orthogonalProjection(), which reports a hit
+		for any point on the segment's infinite extension, this clamps the
+		projection to the segment itself: a point collinear with a wire but
+		past its actual drawn end is correctly reported as far away, not "on"
+		the wire.
+	*/
+	qreal distanceToSegment(const QPointF &point, const QLineF &segment)
+	{
+		const QPointF a = segment.p1();
+		const QPointF b = segment.p2();
+		const QPointF ab = b - a;
+		const qreal len2 = QPointF::dotProduct(ab, ab);
+
+		if (len2 <= 0.0)
+			return QLineF(point, a).length();
+
+		qreal t = QPointF::dotProduct(point - a, ab) / len2;
+		t = qBound(0.0, t, 1.0);
+		return QLineF(point, a + t * ab).length();
+	}
+}
 
 /**
 	@brief DiagramEventAddElement::DiagramEventAddElement
@@ -255,9 +288,206 @@ void DiagramEventAddElement::addElement()
 	//added to the scene so new conductor are created between terminal of the new element
 	//and the opposite terminal of m_element.
 	m_diagram->removeItem(m_element);
-	while (!element -> AlignedFreeTerminals().isEmpty() && m_diagram -> project() -> autoConductor())
+
+		//Auto break conductor: if a terminal of the new element lies on an existing
+		//conductor, break the conductor and reconnect through the new element's terminal.
+		//Track the endpoints of broken conductors so auto-connect doesn't create duplicates.
+	QSet<Terminal *> broken_endpoints;
+
+	if (m_diagram->project()->autoBreakConductor())
 	{
-		QPair <Terminal *, Terminal *> pair = element -> AlignedFreeTerminals().takeFirst();
+			//Track which conductors we already handled for this element
+		QList<Conductor *> conductors_handled;
+			//Track which terminals of the new element are already used (by break or other-connect)
+		QSet<Terminal *> used_terminals;
+
+		foreach (Terminal *t, element->terminals())
+		{
+				//Skip terminals already used by a previous break+reconnect (other_terminal)
+			if (used_terminals.contains(t))
+				continue;
+
+			QPointF t_dock = t->dockConductor();
+
+				//Collect all conductors that pass through this dock point.
+			struct ConductorMatch {
+				Conductor *conductor;
+				Terminal *connect_to;  //endpoint "before" the dock point (based on orientation)
+				Terminal *other;       //endpoint "after" the dock point
+			};
+			QList<ConductorMatch> all_matches;
+
+			foreach (Conductor *c, m_diagram->conductors())
+			{
+					//Skip conductors we already handled or connected to the new element
+				if (conductors_handled.contains(c) ||
+				    c->terminal1->parentElement() == element ||
+				    c->terminal2->parentElement() == element)
+					continue;
+
+					//Check if dock point lies on the conductor path. Distance is
+					//measured to the segment itself (clamped), not the infinite
+					//line through it -- see distanceToSegment().
+				QPointF local_dock = c->mapFromScene(t_dock);
+				bool point_on_conductor = false;
+				QPainterPath path = c->path();
+				for (int i = 0; i < path.elementCount() - 1; ++i)
+				{
+					const QPainterPath::Element &e1 = path.elementAt(i);
+					const QPainterPath::Element &e2 = path.elementAt(i + 1);
+					QLineF segment(QPointF(e1.x, e1.y), QPointF(e2.x, e2.y));
+					if (distanceToSegment(local_dock, segment) < 5.0)
+					{
+						point_on_conductor = true;
+						break;
+					}
+				}
+
+				if (!point_on_conductor)
+					continue;
+
+				Terminal *c1 = c->terminal1;
+				Terminal *c2 = c->terminal2;
+				QPointF c1_dock = c1->dockConductor();
+				QPointF c2_dock = c2->dockConductor();
+
+				Terminal *connect_to = nullptr;
+				Terminal *other = nullptr;
+
+				switch (t->orientation()) {
+					case Qet::North:
+						if (c1_dock.y() < t_dock.y()) { connect_to = c1; other = c2; }
+						else if (c2_dock.y() < t_dock.y()) { connect_to = c2; other = c1; }
+						break;
+					case Qet::South:
+						if (c1_dock.y() > t_dock.y()) { connect_to = c1; other = c2; }
+						else if (c2_dock.y() > t_dock.y()) { connect_to = c2; other = c1; }
+						break;
+					case Qet::East:
+						if (c1_dock.x() > t_dock.x()) { connect_to = c1; other = c2; }
+						else if (c2_dock.x() > t_dock.x()) { connect_to = c2; other = c1; }
+						break;
+					case Qet::West:
+						if (c1_dock.x() < t_dock.x()) { connect_to = c1; other = c2; }
+						else if (c2_dock.x() < t_dock.x()) { connect_to = c2; other = c1; }
+						break;
+				}
+
+				if (!connect_to) {
+					qreal d1 = QLineF(t_dock, c1_dock).length();
+					qreal d2 = QLineF(t_dock, c2_dock).length();
+					if (d1 <= d2) { connect_to = c1; other = c2; }
+					else { connect_to = c2; other = c1; }
+				}
+
+				all_matches.append({c, connect_to, other});
+			}
+
+			if (all_matches.isEmpty())
+				continue;
+
+				//Group matches by their "other" endpoint and find the largest group.
+				//This ensures that when multiple independent circuits cross at the
+				//same dock point, the group with the most conductors gets priority,
+				//not whichever happens to have the nearest connect_to endpoint.
+			QMap<Terminal *, QList<ConductorMatch>> groups;
+			for (const auto &m : all_matches) {
+				groups[m.other].append(m);
+			}
+			Terminal *best_other = nullptr;
+			int best_count = 0;
+			for (auto it = groups.constBegin(); it != groups.constEnd(); ++it) {
+				if (it.value().size() > best_count) {
+					best_count = it.value().size();
+					best_other = it.key();
+				}
+			}
+
+				//Only break conductors in the largest group (same "other" endpoint).
+				//This prevents bridging independent nets: if two unrelated conductors
+				//cross at a dock point, only the larger group gets broken.
+			const QList<ConductorMatch> &matches = groups[best_other];
+
+				//Mark terminal as used
+			used_terminals.insert(t);
+
+				//Delete all matched conductors in one batch
+			DiagramContent content;
+			for (const auto &m : matches) {
+				content.m_other_conductors.append(m.conductor);
+				conductors_handled.append(m.conductor);
+			}
+			new DeleteQGraphicsItemCommand(m_diagram, content, undo_object);
+
+				//Create new conductors from each connect_to endpoint to this terminal.
+				//This creates junctions at the terminal when multiple conductors
+				//from the same circuit pass through the dock point (e.g. left and
+				//right conductors going to the same terminal strip terminal).
+			for (const auto &m : matches) {
+				Conductor *new_c = new Conductor(m.connect_to, t);
+				new AddGraphicsObjectCommand(new_c, m_diagram, QPointF(), undo_object);
+				ConductorAutoNumerotation can(new_c, m_diagram, undo_object);
+				can.numerate();
+				if (m_diagram->freezeNewConductors() || m_diagram->project()->isFreezeNewConductors())
+					new_c->setFreezeLabel(true);
+
+				broken_endpoints.insert(m.connect_to);
+			}
+
+				//Connect the shared "other" endpoint to the nearest free terminal
+				//with matching orientation.
+			QPointF other_dock = best_other->dockConductor();
+			Terminal *other_terminal = nullptr;
+			qreal best_dist = std::numeric_limits<qreal>::max();
+			foreach (Terminal *ot, element->terminals())
+			{
+				if (used_terminals.contains(ot))
+					continue;
+
+					//Check that the other_dock approaches from the correct direction
+					//relative to the candidate terminal's orientation.
+				QPointF ot_dock = ot->dockConductor();
+				bool orientation_ok = false;
+				switch (ot->orientation()) {
+					case Qet::North: orientation_ok = other_dock.y() < ot_dock.y(); break;
+					case Qet::South: orientation_ok = other_dock.y() > ot_dock.y(); break;
+					case Qet::East:  orientation_ok = other_dock.x() > ot_dock.x(); break;
+					case Qet::West:  orientation_ok = other_dock.x() < ot_dock.x(); break;
+				}
+				if (!orientation_ok)
+					continue;
+
+				qreal dist = QLineF(ot_dock, other_dock).length();
+				if (dist < best_dist) {
+					best_dist = dist;
+					other_terminal = ot;
+				}
+			}
+
+			if (other_terminal) {
+				Conductor *new_c2 = new Conductor(best_other, other_terminal);
+				new AddGraphicsObjectCommand(new_c2, m_diagram, QPointF(), undo_object);
+				ConductorAutoNumerotation can2(new_c2, m_diagram, undo_object);
+				can2.numerate();
+				if (m_diagram->freezeNewConductors() || m_diagram->project()->isFreezeNewConductors())
+					new_c2->setFreezeLabel(true);
+
+				broken_endpoints.insert(best_other);
+				used_terminals.insert(other_terminal);
+			}
+		}
+	}
+
+		//Auto-connect: collect all aligned pairs first, then filter and process.
+	QList<QPair<Terminal *, Terminal *>> aligned_pairs;
+	if (m_diagram->project()->autoConductor())
+		aligned_pairs = element->AlignedFreeTerminals();
+
+	for (const QPair<Terminal *, Terminal *> &pair : aligned_pairs)
+	{
+			//Skip if the other terminal was an endpoint of a broken conductor
+		if (broken_endpoints.contains(pair.second))
+			continue;
 
 		Conductor *conductor = new Conductor(pair.first, pair.second);
 		new AddGraphicsObjectCommand(conductor, m_diagram, QPointF(), undo_object);
@@ -271,7 +501,12 @@ void DiagramEventAddElement::addElement()
 	}
 	m_diagram->addItem(m_element);
 
+		//Autonum the new element before pushing undo_object, so the counter
+		//change it triggers is part of the same undo macro as the element's
+		//own placement (one Ctrl+Z reverts both, instead of silently
+		//leaving the counter advanced).
+	element->setUpFormula(true, undo_object);
+
 	m_diagram -> undoStack().push(undo_object);
-	element->setUpFormula();
 	element->freezeNewAddedElement();
 }

sources/diagramevent/diagrameventaddshape.cpp

@@ -18,6 +18,7 @@
 #include "diagrameventaddshape.h"
 
 #include "../diagram.h"
+#include "../lastusedstyle.h"
 #include "../undocommand/addgraphicsobjectcommand.h"
 
 /**
@@ -77,6 +78,14 @@ void DiagramEventAddShape::mousePressEvent(QGraphicsSceneMouseEvent *event)
 		if (!m_shape_item)
 		{
 			m_shape_item = new QetShapeItem(pos, pos, m_shape_type);
+				//Start from whatever pen/brush was last applied this
+				//session, rather than always the hardcoded default.
+			if (LastUsedStyle::hasShapePen()) {
+				m_shape_item->setPen(LastUsedStyle::shapePen());
+			}
+			if (LastUsedStyle::hasShapeBrush()) {
+				m_shape_item->setBrush(LastUsedStyle::shapeBrush());
+			}
 			m_diagram->addItem (m_shape_item);
 			event->setAccepted(true);
 			return;

sources/editor/graphicspart/partplctable.cpp

@@ -18,6 +18,7 @@
 #include "partplctable.h"
 
 #include "../../QPropertyUndoCommand/qpropertyundocommand.h"
+#include "../../qetapp.h"
 #include "../../QetGraphicsItemModeler/qetgraphicshandleritem.h"
 #include "../../QetGraphicsItemModeler/qetgraphicshandlerutility.h"
 #include "../../properties/elementdata.h"
@@ -302,7 +303,7 @@ void PartPlcTable::paint(QPainter *painter, const QStyleOptionGraphicsItem *opti
 
 		// Draw column headers
 		QFont header_font = plc_data.headerFont.family().isEmpty()
-			? painter->font() : plc_data.headerFont;
+			? QETApp::diagramTextsFont() : plc_data.headerFont;
 		header_font.setBold(true);
 		painter->setFont(header_font);
 
@@ -318,7 +319,7 @@ void PartPlcTable::paint(QPainter *painter, const QStyleOptionGraphicsItem *opti
 
 		// Draw IO rows
 		QFont cell_font = plc_data.cellFont.family().isEmpty()
-			? painter->font() : plc_data.cellFont;
+			? QETApp::diagramTextsFont() : plc_data.cellFont;
 		painter->setFont(cell_font);
 		int start_idx = block_starts.at(block);
 		int end_idx = (block + 1 < block_starts.size())

sources/editor/ui/elementpropertieseditorwidget.cpp

@@ -28,6 +28,8 @@
 #include <QSignalBlocker>
 #include <QTableWidgetItem>
 #include <QHeaderView>
+#include <QScrollBar>
+#include <QWheelEvent>
 #include <QTableWidget>
 #include <QCheckBox>
 #include <QGroupBox>
@@ -41,6 +43,8 @@
 #include <QFont>
 #include <QLineEdit>
 #include <QSplitter>
+#include <QShortcut>
+#include <QMenu>
 
 /**
 	@brief The EditorDelegate class
@@ -666,10 +670,15 @@ void ElementPropertiesEditorWidget::createPlcConfigWidgets()
 	plc_layout->addLayout(toolbar);
 
 	// Tables side by side: IO table (left) + Terminal table (right)
-	auto *tables_splitter = new QSplitter(Qt::Horizontal, m_plc_gb);
+	// Both share a single vertical scrollbar on the right
+	auto *tables_container = new QWidget(m_plc_gb);
+	auto *tables_layout = new QHBoxLayout(tables_container);
+	tables_layout->setContentsMargins(0, 0, 0, 0);
+
+	auto *splitter = new QSplitter(Qt::Horizontal, tables_container);
 
 	// IO Table
-	m_plc_table = new QTableWidget(tables_splitter);
+	m_plc_table = new QTableWidget(splitter);
 	m_plc_table->setColumnCount(5);
 	m_plc_table->setHorizontalHeaderLabels({
 		tr("Type"), tr("Adresse"), tr("Fonction"),
@@ -686,10 +695,10 @@ void ElementPropertiesEditorWidget::createPlcConfigWidgets()
 	m_plc_table->setSelectionBehavior(QAbstractItemView::SelectItems);
 	m_plc_table->setSelectionMode(QAbstractItemView::ExtendedSelection);
 	m_plc_table->setMinimumHeight(200);
-	tables_splitter->addWidget(m_plc_table);
+	m_plc_table->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
 
 	// Terminal table (per IO: Nb + T1-T4)
-	m_plc_terminal_table = new QTableWidget(tables_splitter);
+	m_plc_terminal_table = new QTableWidget(splitter);
 	m_plc_terminal_table->setColumnCount(2);
 	m_plc_terminal_table->setHorizontalHeaderLabels({
 		tr("Nb."), tr("T1")
@@ -700,13 +709,61 @@ void ElementPropertiesEditorWidget::createPlcConfigWidgets()
 	m_plc_terminal_table->setSelectionBehavior(QAbstractItemView::SelectItems);
 	m_plc_terminal_table->setSelectionMode(QAbstractItemView::ExtendedSelection);
 	m_plc_terminal_table->setMinimumHeight(200);
-	tables_splitter->addWidget(m_plc_terminal_table);
+	m_plc_terminal_table->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
 
-	tables_splitter->setStretchFactor(0, 3);
-	tables_splitter->setStretchFactor(1, 1);
-	tables_splitter->setSizes({500, 150});
+	// Shared vertical scrollbar
+	m_plc_shared_scrollbar = new QScrollBar(Qt::Vertical, tables_container);
+	m_plc_shared_scrollbar->setMinimum(0);
 
-	plc_layout->addWidget(tables_splitter);
+	splitter->addWidget(m_plc_table);
+	splitter->addWidget(m_plc_terminal_table);
+	splitter->setStretchFactor(0, 3);
+	splitter->setStretchFactor(1, 1);
+
+	tables_layout->addWidget(splitter);
+	tables_layout->addWidget(m_plc_shared_scrollbar);
+
+	// Bidirectional sync between tables and shared scrollbar
+	// Use flag to prevent infinite loops
+	connect(m_plc_shared_scrollbar, &QScrollBar::valueChanged,
+		this, [this](int value) {
+			if (m_plc_scroll_sync) return;
+			m_plc_scroll_sync = true;
+			m_plc_table->verticalScrollBar()->setValue(value);
+			m_plc_terminal_table->verticalScrollBar()->setValue(value);
+			m_plc_scroll_sync = false;
+		});
+	connect(m_plc_table->verticalScrollBar(), &QScrollBar::valueChanged,
+		this, [this](int value) {
+			if (m_plc_scroll_sync) return;
+			m_plc_scroll_sync = true;
+			m_plc_shared_scrollbar->setValue(value);
+			m_plc_terminal_table->verticalScrollBar()->setValue(value);
+			m_plc_scroll_sync = false;
+		});
+	connect(m_plc_terminal_table->verticalScrollBar(), &QScrollBar::valueChanged,
+		this, [this](int value) {
+			if (m_plc_scroll_sync) return;
+			m_plc_scroll_sync = true;
+			m_plc_shared_scrollbar->setValue(value);
+			m_plc_table->verticalScrollBar()->setValue(value);
+			m_plc_scroll_sync = false;
+		});
+
+	// Update shared scrollbar range from both tables
+	auto syncRange = [this]() {
+		int max = qMax(m_plc_table->verticalScrollBar()->maximum(),
+				   m_plc_terminal_table->verticalScrollBar()->maximum());
+		m_plc_shared_scrollbar->blockSignals(true);
+		m_plc_shared_scrollbar->setMaximum(max);
+		m_plc_shared_scrollbar->blockSignals(false);
+	};
+	connect(m_plc_table->verticalScrollBar(), &QScrollBar::rangeChanged,
+		this, syncRange);
+	connect(m_plc_terminal_table->verticalScrollBar(), &QScrollBar::rangeChanged,
+		this, syncRange);
+
+	plc_layout->addWidget(tables_container);
 
 	// Font settings
 	auto *font_layout = new QHBoxLayout();
@@ -790,12 +847,25 @@ void ElementPropertiesEditorWidget::createPlcConfigWidgets()
 	}
 	plc_layout->addLayout(col_layout);
 
-	// Add to master group box
-	ui->m_master_gb->layout()->addWidget(m_plc_gb);
+	// Add to master group box - row 4, full width
+	auto *gl = qobject_cast<QGridLayout*>(ui->m_master_gb->layout());
+	gl->addWidget(m_plc_gb, 4, 0, 1, 2);
 
 	// Connect signals
 	connect(add_btn, &QPushButton::clicked, this, &ElementPropertiesEditorWidget::plcAddRow);
 	connect(remove_btn, &QPushButton::clicked, this, &ElementPropertiesEditorWidget::plcRemoveRow);
+
+	// Ctrl+V shortcut for paste
+	auto *paste_shortcut = new QShortcut(QKeySequence::Paste, m_plc_table);
+	connect(paste_shortcut, &QShortcut::activated, this, &ElementPropertiesEditorWidget::plcPasteFromClipboard);
+
+	// Context menu for the PLC table
+	m_plc_table->setContextMenuPolicy(Qt::CustomContextMenu);
+	connect(m_plc_table, &QTableWidget::customContextMenuRequested, this, [this](const QPoint &pos) {
+		QMenu menu;
+		menu.addAction(tr("Coller depuis le presse-papiers"), this, &ElementPropertiesEditorWidget::plcPasteFromClipboard);
+		menu.exec(m_plc_table->mapToGlobal(pos));
+	});
 }
 
 /**
@@ -877,12 +947,12 @@ void ElementPropertiesEditorWidget::populatePlcTable()
 	m_plc_header_font = plc_data.headerFont;
 	m_plc_cell_font = plc_data.cellFont;
 	if (m_plc_header_font.family().isEmpty()) {
-		m_plc_header_font = QFont(m_plc_table->font());
+		m_plc_header_font = QETApp::diagramTextsFont();
 		m_plc_header_font.setBold(true);
 		m_plc_header_font.setPointSize(8);
 	}
 	if (m_plc_cell_font.family().isEmpty()) {
-		m_plc_cell_font = QFont(m_plc_table->font());
+		m_plc_cell_font = QETApp::diagramTextsFont();
 		m_plc_cell_font.setPointSize(8);
 	}
 	m_plc_header_font_btn->setText(tr("Police des en-têtes: %1 %2pt")
@@ -920,6 +990,21 @@ void ElementPropertiesEditorWidget::populatePlcTable()
 				hdr->moveSection(hdr->visualIndex(logical), visual);
 		}
 	}
+
+	// Ensure scrollbars stay hidden and sync shared scrollbar range
+	if (m_plc_table) {
+		m_plc_table->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
+		m_plc_table->verticalScrollBar()->setVisible(false);
+	}
+	if (m_plc_terminal_table) {
+		m_plc_terminal_table->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
+		m_plc_terminal_table->verticalScrollBar()->setVisible(false);
+	}
+	if (m_plc_shared_scrollbar && m_plc_table) {
+		int max = qMax(m_plc_table->verticalScrollBar()->maximum(),
+				   m_plc_terminal_table->verticalScrollBar()->maximum());
+		m_plc_shared_scrollbar->setMaximum(max);
+	}
 }
 
 /**
@@ -1158,53 +1243,80 @@ void ElementPropertiesEditorWidget::plcPasteFromClipboard()
 		return;
 
 	QStringList lines = clipboard_text.split('\n', Qt::SkipEmptyParts);
+	if (lines.isEmpty())
+		return;
 
-	int start_row = m_plc_table->rowCount();
-	m_plc_table->setRowCount(start_row + lines.size());
-
-	for (int i = 0; i < lines.size(); ++i) {
-		QStringList cells = lines.at(i).split('\t');
-		int row = start_row + i;
-
-		// Type combo
-		auto *type_cb = new QComboBox(m_plc_table);
-		QStringList plc_types = ElementData::plcIOTypeList();
-		for (int t = 0; t < plc_types.size(); ++t) {
-			type_cb->addItem(plc_types.at(t), t);
-		}
-
-		// Try to match type from clipboard
-		if (!cells.isEmpty()) {
-			QString type_str = cells.at(0).trimmed();
-			int type_idx = -1;
-			for (int t = 0; t < plc_types.size(); ++t) {
-				if (plc_types.at(t).compare(type_str, Qt::CaseInsensitive) == 0) {
-					type_idx = t;
+	bool has_tabs = false;
+	for (const QString &line : lines) {
+		if (line.contains('\t')) {
+			has_tabs = true;
 			break;
 		}
 	}
-			if (type_idx >= 0)
-				type_cb->setCurrentIndex(type_idx);
+
+	if (!has_tabs) {
+		// Vertical paste: values go down the same column
+		int target_col = m_plc_table->currentColumn();
+		if (target_col < 0) target_col = 0;
+		int target_row = m_plc_table->currentRow();
+		if (target_row < 0) target_row = 0;
+		int max_rows = m_plc_table->rowCount();
+
+		for (int i = 0; i < lines.size(); ++i) {
+			int row = target_row + i;
+			if (row >= max_rows) break;
+			plcSetCellFromValue(row, target_col, lines.at(i).trimmed());
 		}
-		m_plc_table->setCellWidget(row, 0, type_cb);
+	} else {
+		// Horizontal paste: each line is a separate IO row
+		int target_row = m_plc_table->currentRow();
+		if (target_row < 0) target_row = 0;
+		int max_rows = m_plc_table->rowCount();
 
-		// Address
-		m_plc_table->setItem(row, 1, new QTableWidgetItem(
-			cells.size() > 1 ? cells.at(1).trimmed() : QString()));
+		for (int i = 0; i < lines.size(); ++i) {
+			int row = target_row + i;
+			if (row >= max_rows) break;
+			QStringList cells = lines.at(i).split('\t');
+			for (int c = 0; c < cells.size(); ++c) {
+				if (c > 4) break;
+				plcSetCellFromValue(row, c, cells.at(c).trimmed());
+			}
+		}
+	}
+}
 
-		// Function text
-		m_plc_table->setItem(row, 2, new QTableWidgetItem(
-			cells.size() > 2 ? cells.at(2).trimmed() : QString()));
+/**
+ * @brief ElementPropertiesEditorWidget::plcSetCellFromValue
+ * Set a single table cell value, respecting the column widget type.
+ */
+void ElementPropertiesEditorWidget::plcSetCellFromValue(int row, int col, const QString &val)
+{
+	if (!m_plc_table || row < 0 || col < 0 || col > 4)
+		return;
 
-		// Comment
-		m_plc_table->setItem(row, 3, new QTableWidgetItem(
-			cells.size() > 3 ? cells.at(3).trimmed() : QString()));
-
-		// CrossRef (read-only)
-		auto *crossref_item = new QTableWidgetItem(
-			cells.size() > 4 ? cells.at(4).trimmed() : QString());
-		crossref_item->setFlags(crossref_item->flags() & ~Qt::ItemIsEditable);
-		m_plc_table->setItem(row, 4, crossref_item);
+	if (col == 0) {
+		auto *type_cb = qobject_cast<QComboBox*>(m_plc_table->cellWidget(row, col));
+		if (!type_cb)
+			return;
+		if (!val.isEmpty()) {
+			QStringList plc_types = ElementData::plcIOTypeList();
+			for (int t = 0; t < plc_types.size(); ++t) {
+				if (plc_types.at(t).compare(val, Qt::CaseInsensitive) == 0) {
+					type_cb->setCurrentIndex(t);
+					return;
+				}
+			}
+		}
+	}
+	else if (col == 4) {
+		// CrossRef - read-only
+		auto *item = new QTableWidgetItem(val);
+		item->setFlags(item->flags() & ~Qt::ItemIsEditable);
+		m_plc_table->setItem(row, col, item);
+	}
+	else {
+		// Text columns: Address, Function, Comment
+		m_plc_table->setItem(row, col, new QTableWidgetItem(val));
 	}
 }
 

sources/editor/ui/elementpropertieseditorwidget.h

@@ -30,6 +30,7 @@ class QCheckBox;
 class QGroupBox;
 class QPushButton;
 class QLineEdit;
+class QScrollBar;
 
 namespace Ui {
 	class ElementPropertiesEditorWidget;
@@ -74,6 +75,7 @@ class ElementPropertiesEditorWidget : public QDialog
 		void plcTerminalCountChanged(int row, int count);
 		void plcSelectHeaderFont();
 		void plcSelectCellFont();
+		void plcSetCellFromValue(int row, int col, const QString &val);
 
 		//ATTRIBUTES
 	private:
@@ -95,6 +97,8 @@ class ElementPropertiesEditorWidget : public QDialog
 	QList<QCheckBox *> m_plc_col_visibility_checkboxes;
 	QList<QSpinBox *>  m_plc_col_width_spinboxes;
 	QList<QLineEdit *> m_plc_col_name_edits;
+	QScrollBar *m_plc_shared_scrollbar = nullptr;
+	bool m_plc_scroll_sync = false;
 };
 
 #endif // ELEMENTPROPERTIESEDITORWIDGET_H

sources/editor/ui/elementpropertieseditorwidget.ui

@@ -39,6 +39,19 @@
          <item>
           <widget class="QComboBox" name="m_base_type_cb"/>
          </item>
+        <item>
+         <spacer name="verticalSpacer_2">
+          <property name="orientation">
+           <enum>Qt::Vertical</enum>
+          </property>
+          <property name="sizeHint" stdset="0">
+           <size>
+            <width>20</width>
+            <height>40</height>
+           </size>
+          </property>
+         </spacer>
+        </item>
        </layout>
        </item>
        <item>
@@ -94,16 +107,33 @@
           <string>Élément maître</string>
          </property>
            <layout class="QGridLayout" name="gridLayout_3">
-           <item row="0" column="0">
+            <item row="0" column="0" colspan="2">
+             <layout class="QHBoxLayout" name="type_concret_layout">
+              <item>
                <widget class="QLabel" name="label_5">
                 <property name="text">
                  <string>Type concret</string>
                 </property>
                </widget>
               </item>
-           <item row="0" column="1">
+              <item>
+               <spacer name="type_concret_spacer">
+                <property name="orientation">
+                 <enum>Qt::Horizontal</enum>
+                </property>
+                <property name="sizeHint" stdset="0">
+                 <size>
+                  <width>40</width>
+                  <height>20</height>
+                 </size>
+                </property>
+               </spacer>
+              </item>
+              <item>
                <widget class="QComboBox" name="m_master_type_cb"/>
               </item>
+             </layout>
+            </item>
           <item row="1" column="0">
            <widget class="QCheckBox" name="max_slaves_checkbox">
             <property name="text">
@@ -202,19 +232,6 @@
          </layout>
         </widget>
        </item>
-       <item>
-        <spacer name="verticalSpacer_2">
-         <property name="orientation">
-          <enum>Qt::Vertical</enum>
-         </property>
-         <property name="sizeHint" stdset="0">
-          <size>
-           <width>20</width>
-           <height>40</height>
-          </size>
-         </property>
-        </spacer>
-       </item>
        </layout>
      </widget>
      <widget class="QWidget" name="Informations">

sources/elementdialog.cpp

@@ -19,6 +19,7 @@
 
 #include "ElementsCollection/elementcollectionitem.h"
 #include "ElementsCollection/elementscollectionmodel.h"
+#include "ElementsCollection/elementstreeview.h"
 #include "qetapp.h"
 #include "qetmessagebox.h"
 #include "qfilenameedit.h"
@@ -88,7 +89,7 @@ void ElementDialog::setUpWidget()
 	layout->addWidget(new QLabel(label_));
 
 
-	m_tree_view = new QTreeView(this);
+	m_tree_view = new ElementsTreeView(this);
 
 	m_model = new ElementsCollectionModel(m_tree_view);
 

sources/elementspanelwidget.cpp

@@ -61,6 +61,8 @@ ElementsPanelWidget::ElementsPanelWidget(QWidget *parent) : QWidget(parent) {
 	prj_edit_prop            = new QAction(QET::Icons::DialogInformation,      tr("Propriétés du projet"),          this);
 	prj_prop_diagram         = new QAction(QET::Icons::DialogInformation,      tr("Propriétés du folio"),       this);
 	prj_add_diagram          = new QAction(QET::Icons::DiagramAdd,              tr("Ajouter un folio"),                this);
+	prj_insert_diagram_above = new QAction(QET::Icons::DiagramAdd,              tr("Insérer un folio au-dessus"),      this);
+	prj_insert_diagram_below = new QAction(QET::Icons::DiagramAdd,              tr("Insérer un folio en dessous"),     this);
 	prj_duplicate_diagram   = new QAction(QET::Icons::IC_CopyFile,              tr("Copier et coller"),               this);
 	prj_del_diagram          = new QAction(QET::Icons::DiagramDelete,          tr("Supprimer ce folio"),              this);
 	prj_move_diagram_up      = new QAction(QET::Icons::GoUp,                   tr("Remonter ce folio"),               this);
@@ -101,6 +103,8 @@ ElementsPanelWidget::ElementsPanelWidget(QWidget *parent) : QWidget(parent) {
 	connect(prj_edit_prop,         SIGNAL(triggered()), this,           SLOT(editProjectProperties()));
 	connect(prj_prop_diagram,      SIGNAL(triggered()), this,           SLOT(editDiagramProperties()));
 	connect(prj_add_diagram,       SIGNAL(triggered()), this,           SLOT(newDiagram()));
+	connect(prj_insert_diagram_above, SIGNAL(triggered()), this,        SLOT(insertDiagramAbove()));
+	connect(prj_insert_diagram_below, SIGNAL(triggered()), this,        SLOT(insertDiagramBelow()));
 	connect(prj_del_diagram,       SIGNAL(triggered()), this,           SLOT(deleteDiagram()));
 	connect(prj_duplicate_diagram, SIGNAL(triggered()), this,           SLOT(duplicateDiagram()));
 	connect(prj_move_diagram_up,   SIGNAL(triggered()), this,           SLOT(moveDiagramUp()));
@@ -245,6 +249,32 @@ void ElementsPanelWidget::newDiagram()
 	}
 }
 
+/**
+	@brief ElementsPanelWidget::insertDiagramAbove
+	Emit requestForNewDiagramAt with the position of the currently
+	selected diagram, inserting the new folio right before it.
+*/
+void ElementsPanelWidget::insertDiagramAbove()
+{
+	if (Diagram *selected_diagram = elements_panel -> selectedDiagram()) {
+		QETProject *project = selected_diagram->project();
+		emit(requestForNewDiagramAt(project, project->folioIndex(selected_diagram)));
+	}
+}
+
+/**
+	@brief ElementsPanelWidget::insertDiagramBelow
+	Emit requestForNewDiagramAt with the position right after the
+	currently selected diagram, inserting the new folio right after it.
+*/
+void ElementsPanelWidget::insertDiagramBelow()
+{
+	if (Diagram *selected_diagram = elements_panel -> selectedDiagram()) {
+		QETProject *project = selected_diagram->project();
+		emit(requestForNewDiagramAt(project, project->folioIndex(selected_diagram) + 1));
+	}
+}
+
 /**
  * Emet le signal requestForDiagramsDeletion avec les schemas selectionnes
  */
@@ -451,6 +481,8 @@ void ElementsPanelWidget::updateButtons()
 
 			prj_del_diagram           -> setEnabled(is_writable);
 			prj_duplicate_diagram     -> setEnabled(is_writable);
+			prj_insert_diagram_above -> setEnabled(is_writable);
+			prj_insert_diagram_below -> setEnabled(is_writable);
 			prj_move_diagram_up        -> setEnabled(is_writable && min_position > 0);
 			prj_move_diagram_down     -> setEnabled(is_writable && max_position < project_diagrams_count - 1);
 			prj_move_diagram_top      -> setEnabled(is_writable && min_position > 0);
@@ -504,6 +536,8 @@ void ElementsPanelWidget::handleContextMenu(const QPoint &pos) {
 			break;
 		case QET::Diagram:
 			context_menu -> addAction(prj_prop_diagram);
+			context_menu -> addAction(prj_insert_diagram_above);
+			context_menu -> addAction(prj_insert_diagram_below);
 			context_menu -> addAction(prj_del_diagram);
 			context_menu -> addAction(prj_duplicate_diagram);
 			context_menu -> addAction(prj_move_diagram_top);

sources/elementspanelwidget.h

@@ -46,6 +46,8 @@ class ElementsPanelWidget : public QWidget {
 		*prj_edit_prop,
 		*prj_prop_diagram,
 		*prj_add_diagram,
+		*prj_insert_diagram_above,
+		*prj_insert_diagram_below,
 		*prj_del_diagram,
 		*prj_duplicate_diagram,
 		*prj_move_diagram_up,
@@ -66,6 +68,7 @@ class ElementsPanelWidget : public QWidget {
 	signals:
 	void requestForProject(QETProject *);
 	void requestForNewDiagram(QETProject *);
+	void requestForNewDiagramAt(QETProject *, int);
 	void requestForProjectClosing(QETProject *);
 	void requestForProjectPropertiesEdition(QETProject *);
 	void requestForDiagramPropertiesEdition(Diagram *);
@@ -88,6 +91,8 @@ class ElementsPanelWidget : public QWidget {
 	void editProjectProperties();
 	void editDiagramProperties();
 	void newDiagram();
+	void insertDiagramAbove();
+	void insertDiagramBelow();
 	void deleteDiagram();
 	void duplicateDiagram();
 	void moveDiagramUp();

sources/exportproperties.cpp

@@ -34,6 +34,7 @@ ExportProperties::ExportProperties() :
 	draw_border(true),
 	draw_titleblock(true),
 	draw_terminals(false),
+	draw_terminal_names(false),
 	draw_bg_transparent(false),
 	draw_colored_conductors(true),
 	exported_area(QET::BorderArea)
@@ -70,6 +71,8 @@ void ExportProperties::toSettings(QSettings &settings,
 			  draw_titleblock);
 	settings.setValue(prefix % "drawterminals",
 			  draw_terminals);
+	settings.setValue(prefix % "drawterminalnames",
+			  draw_terminal_names);
 	settings.setValue(prefix % "drawbgtransparent",
 			  draw_bg_transparent);
 	settings.setValue(prefix % "drawcoloredconductors",
@@ -105,6 +108,8 @@ void ExportProperties::fromSettings(QSettings &settings,
 					 true ).toBool();
 	draw_terminals = settings.value(prefix % "drawterminals",
 					false).toBool();
+	draw_terminal_names = settings.value(prefix % "drawterminalnames",
+					false).toBool();
 	draw_bg_transparent = settings.value(prefix % "drawbgtransparent",
 					false).toBool();
 	draw_colored_conductors = settings.value(

sources/exportproperties.h

@@ -47,6 +47,7 @@ class ExportProperties {
 	bool draw_border;               ///< Whether to render the border (along with rows/columns headers)
 	bool draw_titleblock;           ///< Whether to render the title block
 	bool draw_terminals;            ///< Whether to render terminals
+	bool draw_terminal_names;       ///< Whether to render terminal names/labels
 	bool draw_bg_transparent;       ///< Whether to use transparency for SVG-Export
 	bool draw_colored_conductors;   ///< Whether to render conductors colors
 	QET::DiagramArea exported_area; ///< Area of diagrams to be rendered

sources/exportpropertieswidget.cpp

@@ -63,6 +63,7 @@ ExportProperties ExportPropertiesWidget::exportProperties() const
 	export_properties.draw_border             = draw_border    -> isChecked();
 	export_properties.draw_titleblock         = draw_titleblock     -> isChecked();
 	export_properties.draw_terminals          = draw_terminals -> isChecked();
+	export_properties.draw_terminal_names     = draw_terminal_names -> isChecked();
 	export_properties.draw_bg_transparent     = draw_bg_transparent -> isChecked();
 	export_properties.draw_colored_conductors = draw_colored_conductors -> isChecked();
 	export_properties.exported_area           = export_border -> isChecked() ? QET::BorderArea : QET::ElementsArea;
@@ -85,6 +86,7 @@ void ExportPropertiesWidget::setExportProperties(const ExportProperties &export_
 	draw_border             -> setChecked(export_properties.draw_border);
 	draw_titleblock         -> setChecked(export_properties.draw_titleblock);
 	draw_terminals          -> setChecked(export_properties.draw_terminals);
+	draw_terminal_names     -> setChecked(export_properties.draw_terminal_names);
 	draw_bg_transparent     -> setChecked(export_properties.draw_bg_transparent);
 	draw_colored_conductors -> setChecked(export_properties.draw_colored_conductors);
 	
@@ -206,13 +208,17 @@ void ExportPropertiesWidget::build()
 	draw_terminals = new QCheckBox(tr("Dessiner les bornes"), groupbox_options);
 	optionshlayout -> addWidget(draw_terminals, 2, 1);
 	
+	// dessiner les noms des bornes
+	draw_terminal_names = new QCheckBox(tr("Dessiner les noms des bornes"), groupbox_options);
+	optionshlayout -> addWidget(draw_terminal_names, 3, 0);
+	
 	// conserver les couleurs des conducteurs
 	draw_colored_conductors = new QCheckBox(tr("Conserver les couleurs des conducteurs"), groupbox_options);
-	optionshlayout -> addWidget(draw_colored_conductors, 3, 0);
+	optionshlayout -> addWidget(draw_colored_conductors, 3, 1);
 	
 	// use transparent background for SVG-Export
 	draw_bg_transparent = new QCheckBox(tr("SVG: fond transparent"), groupbox_options);
-	optionshlayout -> addWidget(draw_bg_transparent, 3, 1);
+	optionshlayout -> addWidget(draw_bg_transparent, 4, 0);
 	
 	vboxLayout -> addWidget(groupbox_options);
 	

sources/exportpropertieswidget.h

@@ -62,6 +62,7 @@ class ExportPropertiesWidget : public QWidget {
 	QCheckBox *draw_border;
 	QCheckBox *draw_titleblock;
 	QCheckBox *draw_terminals;
+	QCheckBox *draw_terminal_names;
 	QCheckBox *draw_bg_transparent;
 	QCheckBox *draw_colored_conductors;
 	QRadioButton *export_border;

sources/lastusedstyle.cpp

@@ -0,0 +1,106 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "lastusedstyle.h"
+
+QPen  LastUsedStyle::m_shape_pen;
+bool  LastUsedStyle::m_has_shape_pen = false;
+QBrush LastUsedStyle::m_shape_brush;
+bool  LastUsedStyle::m_has_shape_brush = false;
+QFont LastUsedStyle::m_text_font;
+bool  LastUsedStyle::m_has_text_font = false;
+
+/**
+	@return true if a shape pen was set this session
+*/
+bool LastUsedStyle::hasShapePen()
+{
+	return m_has_shape_pen;
+}
+
+/**
+	@return the last pen applied to a shape this session
+*/
+QPen LastUsedStyle::shapePen()
+{
+	return m_shape_pen;
+}
+
+/**
+	@brief LastUsedStyle::setShapePen
+	Record @a pen as the last-used shape pen for this session
+	@param pen
+*/
+void LastUsedStyle::setShapePen(const QPen &pen)
+{
+	m_shape_pen = pen;
+	m_has_shape_pen = true;
+}
+
+/**
+	@return true if a shape brush was set this session
+*/
+bool LastUsedStyle::hasShapeBrush()
+{
+	return m_has_shape_brush;
+}
+
+/**
+	@return the last brush applied to a shape this session
+*/
+QBrush LastUsedStyle::shapeBrush()
+{
+	return m_shape_brush;
+}
+
+/**
+	@brief LastUsedStyle::setShapeBrush
+	Record @a brush as the last-used shape brush for this session
+	@param brush
+*/
+void LastUsedStyle::setShapeBrush(const QBrush &brush)
+{
+	m_shape_brush = brush;
+	m_has_shape_brush = true;
+}
+
+/**
+	@return true if a text font was set this session
+*/
+bool LastUsedStyle::hasTextFont()
+{
+	return m_has_text_font;
+}
+
+/**
+	@return the last font applied to a free text item this session
+*/
+QFont LastUsedStyle::textFont()
+{
+	return m_text_font;
+}
+
+/**
+	@brief LastUsedStyle::setTextFont
+	Record @a font as the last-used free text font for this session
+	@param font
+*/
+void LastUsedStyle::setTextFont(const QFont &font)
+{
+	m_text_font = font;
+	m_has_text_font = true;
+}

sources/lastusedstyle.h

@@ -0,0 +1,63 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef LAST_USED_STYLE_H
+#define LAST_USED_STYLE_H
+
+#include <QBrush>
+#include <QFont>
+#include <QPen>
+
+/**
+	@brief The LastUsedStyle class
+	Session-scoped "last used" style for new shapes and free text created
+	on the diagram canvas: whatever pen/brush/font was last applied through
+	the properties editors becomes the starting point for the next new
+	item of that type, the way most drawing tools behave.
+
+	Deliberately in-memory only, not QSettings-backed: this is a live
+	"what did I just use" value for the current editing session, not an
+	app-wide default (that's already covered by the Preferences dialog's
+	font setting, read as the fallback when nothing has been set yet).
+*/
+class LastUsedStyle
+{
+	public:
+		static bool hasShapePen();
+		static QPen shapePen();
+		static void setShapePen(const QPen &pen);
+
+		static bool hasShapeBrush();
+		static QBrush shapeBrush();
+		static void setShapeBrush(const QBrush &brush);
+
+		static bool hasTextFont();
+		static QFont textFont();
+		static void setTextFont(const QFont &font);
+
+	private:
+		LastUsedStyle() = delete;
+
+		static QPen m_shape_pen;
+		static bool m_has_shape_pen;
+		static QBrush m_shape_brush;
+		static bool m_has_shape_brush;
+		static QFont m_text_font;
+		static bool m_has_text_font;
+};
+
+#endif // LAST_USED_STYLE_H

sources/logging/crashhandler.cpp

@@ -0,0 +1,171 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "crashhandler.h"
+
+#include "logring.h"
+#include "../qetversion.h"
+
+#include <QByteArray>
+#include <QSysInfo>
+#include <atomic>
+#include <cstring>
+
+#ifdef Q_OS_WIN
+#include <fcntl.h>
+#include <io.h>
+#include <share.h>
+#include <sys/stat.h>
+#include <windows.h>
+#else
+#include <cerrno>
+#include <csignal>
+#include <fcntl.h>
+#include <unistd.h>
+#endif
+
+namespace {
+
+// Everything the handler touches is preallocated here and filled in by
+// install() (normal context, runs once at startup) -- nothing under the
+// actual signal/exception path may allocate or touch QString/Qt.
+const LogRing *g_ring = nullptr;
+char g_dump_path[1024] = {};
+char g_header[1024] = {};
+int g_header_len = 0;
+
+// Guards against two threads crashing at once, or the handler itself
+// faulting while dumping: only the first crash writes a dump. See
+// crashhandler.h invariant 4.
+std::atomic<bool> g_already_dumped{false};
+
+#ifndef Q_OS_WIN
+
+// A stack-overflow SIGSEGV leaves no usable stack for a handler to run
+// on at all, hence the alternate signal stack (invariant: sized well
+// above any known SIGSTKSZ so this doesn't depend on
+// sysconf(_SC_SIGSTKSZ), which some libc versions require at runtime
+// rather than offering as a compile-time constant).
+char g_altstack[65536];
+
+const int kHandledSignals[] = {SIGSEGV, SIGABRT, SIGBUS, SIGFPE, SIGILL};
+
+void restoreDefaultAndReraise(int sig)
+{
+	struct sigaction sa {};
+	sa.sa_handler = SIG_DFL;
+	sigemptyset(&sa.sa_mask);
+	sa.sa_flags = 0;
+	sigaction(sig, &sa, nullptr);
+	raise(sig);
+}
+
+void signalHandler(int sig)
+{
+	if (g_already_dumped.exchange(true, std::memory_order_acq_rel)) {
+		// Not the first crash (concurrent fault on another thread, or
+		// this handler faulting while dumping): skip straight to
+		// restore-and-re-raise rather than risk a second, interleaved
+		// write to the same file.
+		restoreDefaultAndReraise(sig);
+		return;
+	}
+
+	// open/write/close are all on the POSIX async-signal-safe function
+	// list; nothing else is called here.
+	const int fd = ::open(g_dump_path, O_WRONLY | O_CREAT | O_TRUNC, 0600);
+	if (fd >= 0) {
+		if (g_header_len > 0) {
+			::write(fd, g_header, static_cast<size_t>(g_header_len));
+		}
+		if (g_ring) {
+			g_ring->dumpToFd(fd);
+		}
+		::close(fd);
+	}
+
+	restoreDefaultAndReraise(sig);
+}
+
+#else // Q_OS_WIN
+
+LONG WINAPI windowsExceptionFilter(EXCEPTION_POINTERS *)
+{
+	bool expected = false;
+	if (!g_already_dumped.compare_exchange_strong(expected, true, std::memory_order_acq_rel)) {
+		return EXCEPTION_CONTINUE_SEARCH;
+	}
+
+	int fd = -1;
+	errno_t err = _sopen_s(&fd, g_dump_path,
+				_O_WRONLY | _O_CREAT | _O_TRUNC | _O_BINARY,
+				_SH_DENYWR, _S_IREAD | _S_IWRITE);
+	if (err == 0 && fd >= 0) {
+		if (g_header_len > 0) {
+			_write(fd, g_header, g_header_len);
+		}
+		if (g_ring) {
+			g_ring->dumpToFd(fd);
+		}
+		_close(fd);
+	}
+
+	// Do not suppress Windows Error Reporting / an attached debugger --
+	// same invariant as re-raising on POSIX (see crashhandler.h,
+	// invariant 3).
+	return EXCEPTION_CONTINUE_SEARCH;
+}
+
+#endif
+
+} // namespace
+
+void CrashHandler::install(const LogRing *ring, const QString &dump_path)
+{
+	g_ring = ring;
+
+	const QByteArray path_utf8 = dump_path.toUtf8();
+	std::strncpy(g_dump_path, path_utf8.constData(), sizeof(g_dump_path) - 1);
+
+	const QByteArray header = QByteArray("QET crash dump\n")
+		+ "Version: " + QetVersion::displayedVersion().toUtf8() + "\n"
+		+ "Git: " GIT_COMMIT_SHA "\n"
+		+ "OS: " + QSysInfo::prettyProductName().toUtf8() + " (" + QSysInfo::currentCpuArchitecture().toUtf8() + ")\n"
+		+ "Qt: " QT_VERSION_STR "\n"
+		+ "---\n";
+	g_header_len = qMin<int>(header.size(), static_cast<int>(sizeof(g_header)) - 1);
+	std::memcpy(g_header, header.constData(), static_cast<size_t>(g_header_len));
+
+#ifdef Q_OS_WIN
+	SetUnhandledExceptionFilter(windowsExceptionFilter);
+#else
+	stack_t ss;
+	ss.ss_sp = g_altstack;
+	ss.ss_size = sizeof(g_altstack);
+	ss.ss_flags = 0;
+	sigaltstack(&ss, nullptr);
+
+	struct sigaction sa {};
+	sa.sa_handler = signalHandler;
+	sigemptyset(&sa.sa_mask);
+	sa.sa_flags = SA_ONSTACK;
+
+	for (int sig : kHandledSignals) {
+		sigaction(sig, &sa, nullptr);
+	}
+#endif
+}

sources/logging/crashhandler.h

@@ -0,0 +1,85 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef CRASHHANDLER_H
+#define CRASHHANDLER_H
+
+#include <QString>
+
+class LogRing;
+
+/**
+	@brief The CrashHandler class
+	Discussion #644, step 4: on a fatal crash, flush the in-memory
+	LogRing to a fixed file before the process dies, so the last N log
+	lines leading up to the crash survive it -- today they only exist in
+	memory and are lost with the process.
+
+	This is the highest-risk piece of the whole logging rework (the
+	discussion's own words: "lands last, behind its own switch"), so its
+	invariants are worth restating plainly:
+
+	1. The handler must never block. It takes no locks -- LogRing itself
+	   is lock-free for exactly this reason (see logring.h). A handler
+	   that can hang is worse than no handler: it turns a clean crash
+	   (which at least produces a core dump) into a hung process that has
+	   to be force-killed, producing neither a core dump nor a ring dump.
+	2. The handler must never allocate. Under heap corruption -- a
+	   plausible *cause* of the very crash being handled -- malloc may
+	   itself deadlock or fault. Every buffer this code touches at crash
+	   time (the dump path, the header, the ring's own storage) is
+	   preallocated by install(), which runs once at startup in normal
+	   (non-signal) context.
+	3. The handler must not swallow the crash. After writing the dump it
+	   restores the default disposition for the signal and re-raises, so
+	   the OS still produces a core dump (POSIX) / Windows Error
+	   Reporting still sees the exception. A handler that "fixed" the
+	   crash by not re-raising would destroy the post-mortem evidence a
+	   core dump provides.
+	4. Only the *first* crash writes a dump. An atomic test-and-set
+	   guards against two threads faulting simultaneously (or the handler
+	   itself faulting while dumping) producing an interleaved or
+	   truncated file; every crash after the first goes straight to
+	   restore-and-re-raise.
+
+	Tested in this environment: POSIX/Linux only (sigaction, sigaltstack,
+	SIGSEGV/SIGABRT/SIGBUS/SIGFPE/SIGILL). The Windows path
+	(SetUnhandledExceptionFilter) and macOS-specific behaviour (signal
+	handling itself is POSIX and shares the Linux code path, but sandbox
+	profiles can affect where the dump file may be written) are
+	implemented per the discussion's guidance but could not be exercised
+	here -- there is no Windows or macOS build available in this sandbox.
+	Please sanity-check both before relying on them in the field.
+*/
+class CrashHandler
+{
+	public:
+		/// Installs the crash handler. Must be called from normal
+		/// (non-signal) startup code, after the LogRing it will dump
+		/// exists, and only once. `ring` must outlive the process (in
+		/// practice: the LogRing owned by QetLogger's function-local
+		/// static instance, which is never destroyed before exit).
+		/// `dump_path` is resolved and copied into a fixed-size internal
+		/// buffer here; nothing under the actual signal/exception path
+		/// touches QString.
+		static void install(const LogRing *ring, const QString &dump_path);
+
+	private:
+		CrashHandler() = delete;
+};
+
+#endif // CRASHHANDLER_H

sources/logging/eventloopwatchdog.cpp

@@ -0,0 +1,58 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "eventloopwatchdog.h"
+
+#include <QDebug>
+#include <QProcessEnvironment>
+
+EventLoopWatchdog::EventLoopWatchdog(QObject *parent) :
+	QObject(parent)
+{
+	m_disabled = QProcessEnvironment::systemEnvironment()
+			.value(QStringLiteral("QET_WATCHDOG_DISABLE")) == QStringLiteral("1");
+
+	// Precise, not the default Coarse: Coarse explicitly trades timing
+	// accuracy for power/scheduling efficiency (platform-dependent, but
+	// commonly +/- a double-digit percentage), which would show up as
+	// noise indistinguishable from a real stall in exactly the
+	// measurement this class exists to make trustworthy.
+	m_timer.setTimerType(Qt::PreciseTimer);
+	connect(&m_timer, &QTimer::timeout, this, &EventLoopWatchdog::tick);
+}
+
+void EventLoopWatchdog::start()
+{
+	if (m_disabled)
+		return;
+
+	m_elapsed.start();
+	m_timer.start(kTickIntervalMs);
+}
+
+void EventLoopWatchdog::tick()
+{
+	// restart() returns the elapsed time and resets the clock in one
+	// call, so this tick's own cost is never counted against the next.
+	const qint64 actual_ms = m_elapsed.restart();
+
+	if (actual_ms > kStallThresholdMs) {
+		qWarning() << "EventLoopWatchdog: main thread stalled for"
+			   << actual_ms << "ms (expected a tick every"
+			   << kTickIntervalMs << "ms)";
+	}
+}

sources/logging/eventloopwatchdog.h

@@ -0,0 +1,92 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef EVENTLOOPWATCHDOG_H
+#define EVENTLOOPWATCHDOG_H
+
+#include <QElapsedTimer>
+#include <QObject>
+#include <QTimer>
+
+/**
+	@brief The EventLoopWatchdog class
+	Detects when the main (GUI) thread's event loop goes unresponsive --
+	QetLogger (discussion #644) can only see what an explicit qDebug()/
+	qInfo()/qWarning() call already decided to report, and most of a
+	session (painting, dragging, a slow synchronous operation) produces
+	no log output at all, so a silent multi-second gap in the log is
+	indistinguishable from the user simply not doing anything.
+
+	This closes that gap the direct way: a repeating QTimer::PreciseTimer
+	ticks on a short, fixed interval; each tick measures the *actual*
+	wall-clock time elapsed since the previous one via QElapsedTimer
+	(monotonic -- unaffected by system clock/NTP adjustments, unlike
+	QDateTime). Qt does not queue up missed fires for a normal repeating
+	timer, so if the event loop is blocked for 600ms, the timer fires
+	once as soon as the loop frees up, with ~600ms measured since the
+	last tick -- that gap *is* the stall, measured at its source rather
+	than inferred from log silence.
+
+	Only fires a qWarning() (and so only touches the log at all) when a
+	tick is late by more than kStallThresholdMs, to stay within the
+	spirit of QetLogger's bounded-log design (see its class comment) --
+	a healthy session should produce zero output from this class. This
+	tells you *that* a stall happened and *how long* it was, not what
+	caused it; pair a reported timestamp with `docker exec`+gdb the way
+	the CLI hang (PR #661) was diagnosed to go from "it lagged" to a
+	root cause.
+
+	Escape hatch: if QET_WATCHDOG_DISABLE=1 is set in the environment at
+	construction time, start() does nothing.
+*/
+class EventLoopWatchdog : public QObject
+{
+		Q_OBJECT
+
+	public:
+		/// How often the watchdog checks in. Small enough to bound the
+		/// measurement's own granularity, large enough that the tick
+		/// itself is negligible overhead on the event loop it's watching.
+		static constexpr int kTickIntervalMs = 50;
+
+		/// A tick arriving later than this many ms after the previous one
+		/// is logged as a stall. Comfortably above kTickIntervalMs so
+		/// ordinary OS scheduling noise doesn't produce a warning on every
+		/// tick, and in the range a user would actually notice as lag.
+		static constexpr int kStallThresholdMs = 200;
+
+		explicit EventLoopWatchdog(QObject *parent = nullptr);
+
+		/// Starts ticking. Must be called from the main thread, after the
+		/// event loop it watches is about to run (i.e. immediately before
+		/// QApplication::exec()) -- constructing this class earlier is
+		/// harmless, but start() before there is an event loop to tick
+		/// against would just measure the time until app.exec() is
+		/// reached. No-op if QET_WATCHDOG_DISABLE=1 was set at
+		/// construction time.
+		void start();
+
+	private slots:
+		void tick();
+
+	private:
+		QTimer m_timer;
+		QElapsedTimer m_elapsed;
+		bool m_disabled = false;
+};
+
+#endif // EVENTLOOPWATCHDOG_H

sources/logging/logring.cpp

@@ -0,0 +1,152 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "logring.h"
+
+#include <cstring>
+
+#ifdef Q_OS_WIN
+#include <io.h>
+#else
+#include <cerrno>
+#include <unistd.h>
+#endif
+
+static_assert(std::atomic<int>::is_always_lock_free,
+	      "LogRing::Entry::length must be a lock-free atomic<int> -- "
+	      "dumpToFd() reads it from a signal handler and must never block.");
+
+namespace {
+
+/**
+	@brief writeAllSignalSafe
+	Loops until length bytes have been written to fd or an unrecoverable
+	error occurs. write(2) may write fewer bytes than requested and may
+	return EINTR -- both are *more* likely from inside a signal handler
+	than in normal code, so a single write() call is not enough here.
+	Async-signal-safe: only calls write(2)/errno, nothing else.
+*/
+void writeAllSignalSafe(int fd, const char *data, int length) noexcept
+{
+	int remaining = length;
+	const char *p = data;
+
+	while (remaining > 0) {
+#ifdef Q_OS_WIN
+		const int n = _write(fd, p, static_cast<unsigned int>(remaining));
+		if (n <= 0) {
+			return;
+		}
+#else
+		const ssize_t n = ::write(fd, p, static_cast<size_t>(remaining));
+		if (n < 0) {
+			if (errno == EINTR) {
+				continue;
+			}
+			return; // unrecoverable -- give up silently, never block/throw
+		}
+		if (n == 0) {
+			return;
+		}
+#endif
+		p += n;
+		remaining -= static_cast<int>(n);
+	}
+}
+
+} // namespace
+
+LogRing::LogRing() :
+	// The sized constructor value-initialises each Entry in place; unlike
+	// resize(), it doesn't require Entry to be move/copy-constructible,
+	// which std::atomic<int> deliberately never is. The only allocation
+	// this class ever does.
+	m_entries(kCapacityEntries)
+{
+}
+
+void LogRing::append(const QByteArray &line) noexcept
+{
+	static const char kMarker[] = "...[ring-truncated]\n";
+	const int marker_len = static_cast<int>(sizeof(kMarker)) - 1;
+
+	const quint64 idx = m_write_cursor.fetch_add(1, std::memory_order_relaxed);
+	Entry &slot = m_entries[static_cast<size_t>(idx % static_cast<quint64>(kCapacityEntries))];
+
+	// Zero the length first so a concurrent reader landing on this exact
+	// slot mid-copy sees "not ready" rather than the previous lap's
+	// (now-being-overwritten) content at a stale length.
+	slot.length.store(0, std::memory_order_relaxed);
+
+	int len;
+	if (line.size() < kEntryBytes) {
+		std::memcpy(slot.data, line.constData(), static_cast<size_t>(line.size()));
+		len = line.size();
+	} else {
+		const int keep = kEntryBytes - marker_len;
+		std::memcpy(slot.data, line.constData(), static_cast<size_t>(keep));
+		std::memcpy(slot.data + keep, kMarker, static_cast<size_t>(marker_len));
+		len = kEntryBytes;
+	}
+
+	slot.length.store(len, std::memory_order_release);
+}
+
+QVector<QByteArray> LogRing::snapshot() const
+{
+	const quint64 cursor = m_write_cursor.load(std::memory_order_acquire);
+	const quint64 cap = static_cast<quint64>(kCapacityEntries);
+	const quint64 count = (cursor < cap) ? cursor : cap;
+	const quint64 start = (cursor < cap) ? 0 : (cursor - cap);
+
+	QVector<QByteArray> result;
+	result.reserve(static_cast<int>(count));
+
+	for (quint64 i = 0; i < count; ++i) {
+		const Entry &slot = m_entries[static_cast<size_t>((start + i) % cap)];
+		const int len = slot.length.load(std::memory_order_acquire);
+		if (len > 0) {
+			result.append(QByteArray(slot.data, len));
+		}
+	}
+
+	return result;
+}
+
+void LogRing::dumpToFd(int fd) const noexcept
+{
+	const quint64 cursor = m_write_cursor.load(std::memory_order_acquire);
+	const quint64 cap = static_cast<quint64>(kCapacityEntries);
+	const quint64 count = (cursor < cap) ? cursor : cap;
+	const quint64 start = (cursor < cap) ? 0 : (cursor - cap);
+
+	for (quint64 i = 0; i < count; ++i) {
+		const Entry &slot = m_entries[static_cast<size_t>((start + i) % cap)];
+		const int len = slot.length.load(std::memory_order_acquire);
+		if (len > 0) {
+			writeAllSignalSafe(fd, slot.data, len);
+		}
+	}
+}
+
+void LogRing::clear()
+{
+	m_write_cursor.store(0, std::memory_order_relaxed);
+	for (auto &entry : m_entries) {
+		entry.length.store(0, std::memory_order_relaxed);
+	}
+}

sources/logging/logring.h

@@ -0,0 +1,85 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef LOGRING_H
+#define LOGRING_H
+
+#include <QByteArray>
+#include <QVector>
+#include <atomic>
+#include <vector>
+
+/**
+	@brief The LogRing class
+	Fixed-capacity, always-on in-memory ring of the most recent log
+	lines, preallocated once at construction -- append() never
+	allocates.
+
+	Lock-free by construction, not just "thread-safe": step 4 (see
+	crashhandler.h) reads this ring from inside a POSIX signal handler,
+	where taking any lock is unsafe -- if the crashing thread happens to
+	be the one that already holds it (or any other thread does and never
+	gets scheduled again), the handler hangs forever, and you lose both
+	the ring dump *and* the core dump. So there is no mutex here at all:
+	append() claims a slot with a single atomic fetch-add, and
+	dumpToFd()/snapshot() read the preallocated entries directly.
+
+	Accepted tradeoff: if dumpToFd() runs while another thread is
+	mid-append into the exact slot being read (only possible in the
+	crash-handler case, and only for at most one slot), that one entry
+	may be read torn -- part old content, part new. Every other entry is
+	unaffected. This is deliberate: the alternative (a seqlock or similar
+	to detect and retry torn reads) adds real complexity for a window
+	that, per discussion #644, is not worth trading "the handler must
+	never block" against.
+*/
+class LogRing
+{
+	public:
+		static constexpr int kCapacityEntries = 4096;
+		static constexpr int kEntryBytes = 512; // 4096 * 512 = 2 MiB total
+
+		LogRing();
+
+		/// Append one already-formatted, already-truncated log line.
+		/// Bytes beyond kEntryBytes are dropped with a truncation marker.
+		/// Never allocates, never blocks. Safe to call from any normal
+		/// (non-signal) thread concurrently.
+		void append(const QByteArray &line) noexcept;
+
+		/// Snapshot of the entries currently held, oldest first. Normal
+		/// (non-signal) context only.
+		QVector<QByteArray> snapshot() const;
+
+		/// Async-signal-safe: writes every entry currently held to fd via
+		/// write(2) only -- no allocation, no Qt, no locks. May write a
+		/// torn entry under the rare race described above; never blocks.
+		void dumpToFd(int fd) const noexcept;
+
+		void clear();
+
+	private:
+		struct Entry {
+			char data[kEntryBytes];
+			std::atomic<int> length{0}; // 0 = not yet written this lap
+		};
+
+		std::vector<Entry> m_entries; // preallocated once, capacity fixed
+		std::atomic<quint64> m_write_cursor{0}; // monotonically increasing
+};
+
+#endif // LOGRING_H

sources/logging/qetlogger.cpp

@@ -0,0 +1,431 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "qetlogger.h"
+
+#include "crashhandler.h"
+#include "../qetapp.h"
+#include "../qetversion.h"
+
+#include <QDateTime>
+#include <QDir>
+#include <QFileInfo>
+#include <QSysInfo>
+#include <cstdio>
+
+namespace {
+
+/**
+	@brief legacyStderrOutput
+	The QET_LOG_DISABLE=1 escape hatch. Deliberately independent of
+	every other function in this file -- including sanitize()/
+	formatLine(), which are exactly the new code a problem might be in
+	-- so this path stays usable even if the rest of the rework
+	misbehaves. No ring, no file, no rotation, no mutex.
+*/
+void legacyStderrOutput(QtMsgType type, const QMessageLogContext &context, const QString &msg)
+{
+	const QByteArray local_msg = msg.toLocal8Bit();
+	const char *file = context.file ? context.file : "";
+	const char *function = context.function ? context.function : "";
+
+	const char *level = "Unknown";
+	switch (type) {
+		case QtDebugMsg:    level = "Debug";    break;
+		case QtInfoMsg:     level = "Info";     break;
+		case QtWarningMsg:  level = "Warning";  break;
+		case QtCriticalMsg: level = "Critical"; break;
+		case QtFatalMsg:    level = "Fatal";    break;
+	}
+
+	fprintf(stderr, "%s: %s (%s:%u, %s)\n",
+		level, local_msg.constData(), file, context.line, function);
+}
+
+/**
+	@brief ReentrancyGuard
+	Sets the referenced flag on construction, clears it on destruction
+	(including via early return / exception unwinding). Used as the
+	per-thread guard against the logger recursing into itself.
+*/
+struct ReentrancyGuard
+{
+	bool &flag;
+	explicit ReentrancyGuard(bool &f) : flag(f) {flag = true;}
+	~ReentrancyGuard() {flag = false;}
+};
+
+} // namespace
+
+/**
+	@brief QetLogger::instance
+	Function-local static: guaranteed constructed exactly once, in a
+	thread-safe way, on first use -- but the *meaningful* initialisation
+	(log path resolution, opening the file) happens in init(), called
+	explicitly from main() at a defined point, not implicitly on
+	whichever thread happens to log first.
+*/
+QetLogger &QetLogger::instance()
+{
+	static QetLogger logger;
+	return logger;
+}
+
+void QetLogger::init()
+{
+	m_disabled = (qgetenv("QET_LOG_DISABLE") == "1");
+	if (m_disabled) {
+		return;
+	}
+
+	m_log_dir = QETApp::dataDir();
+	m_base_name = QDate::currentDate().toString(QStringLiteral("yyyyMMdd"));
+
+	QMutexLocker locker(&m_file_mutex);
+	m_file_output_ok = ensureFileOpenLocked();
+}
+
+void QetLogger::installCrashHandler()
+{
+	if (m_disabled) {
+		return;
+	}
+	CrashHandler::install(&m_ring, crashDumpPath());
+}
+
+QString QetLogger::crashDumpPath() const
+{
+	return m_log_dir % QStringLiteral("/crash_dump.log");
+}
+
+QString QetLogger::currentLogFilePath() const
+{
+	return m_log_dir % QStringLiteral("/") % m_base_name % QStringLiteral(".log");
+}
+
+/**
+	@brief QetLogger::ensureFileOpenLocked
+	Caller must hold m_file_mutex. Opens the current session's log file
+	if not already open. Refuses to follow a pre-existing symlink at
+	that path, and creates the file owner-read/write only.
+*/
+bool QetLogger::ensureFileOpenLocked()
+{
+	if (m_file.isOpen()) {
+		return true;
+	}
+
+	QDir().mkpath(m_log_dir);
+
+	const QString path = currentLogFilePath();
+
+	const QFileInfo info(path);
+	if (info.exists() && info.isSymLink()) {
+		// Filesystem hardening: refuse a pre-planted symlink rather than
+		// silently appending to whatever it points at.
+		return false;
+	}
+
+	m_file.setFileName(path);
+	if (!m_file.open(QIODevice::WriteOnly | QIODevice::Append)) {
+		return false;
+	}
+	m_file.setPermissions(QFileDevice::ReadOwner | QFileDevice::WriteOwner);
+	m_bytes_written_current_file = m_file.size();
+	return true;
+}
+
+QString QetLogger::rotatedPath(int index) const
+{
+	return m_log_dir % QStringLiteral("/") % m_base_name % QStringLiteral(".") % QString::number(index) % QStringLiteral(".log");
+}
+
+/**
+	@brief QetLogger::rotateLocked
+	Caller must hold m_file_mutex. Shifts .3.log -> .4.log (dropping the
+	previous .4.log), .2.log -> .3.log, .1.log -> .2.log, .log -> .1.log,
+	then opens a fresh, empty current file.
+*/
+void QetLogger::rotateLocked()
+{
+	m_file.close();
+
+	const QString base_path = currentLogFilePath();
+
+	for (int i = kRotationKeep; i >= 1; --i) {
+		const QString from = (i == 1) ? base_path : rotatedPath(i - 1);
+		const QString to = rotatedPath(i);
+
+		if (QFile::exists(to)) {
+			QFile::remove(to);
+		}
+		if (QFile::exists(from)) {
+			QFile::rename(from, to);
+		}
+	}
+
+	m_bytes_written_current_file = 0;
+	m_file_output_ok = ensureFileOpenLocked();
+}
+
+void QetLogger::writeToFile(const QByteArray &line, QtMsgType type)
+{
+	QMutexLocker locker(&m_file_mutex);
+
+	if (!m_file_output_ok) {
+		// Write-failure policy: once file output has failed, stop
+		// attempting it rather than spin-retrying every message. The
+		// ring keeps running regardless.
+		return;
+	}
+
+	const qint64 written = m_file.write(line);
+	if (written != line.size()) {
+		m_file_output_ok = false;
+		m_file.close();
+		return;
+	}
+	m_bytes_written_current_file += written;
+
+	if (type >= QtWarningMsg) {
+		m_file.flush();
+	}
+
+	if (m_bytes_written_current_file >= kMaxFileBytes) {
+		rotateLocked();
+	}
+}
+
+/**
+	@brief QetLogger::sanitize
+	Escapes newlines, carriage returns and other control characters.
+	Much of what QET logs is externally controlled (file paths, element
+	names, font strings read out of a .qet file); left unescaped, a
+	crafted string containing '\n' can forge additional log lines.
+	Operates on already-UTF-8-encoded bytes: this is safe because UTF-8
+	continuation bytes are always >= 0x80, so any byte < 0x20 found here
+	is a genuine ASCII control character, never part of a multi-byte
+	sequence.
+*/
+QByteArray QetLogger::sanitize(const QByteArray &input)
+{
+	QByteArray out;
+	out.reserve(input.size());
+
+	for (unsigned char c : input) {
+		if (c == '\n') {
+			out += "\\n";
+		} else if (c == '\r') {
+			out += "\\r";
+		} else if (c == '\t') {
+			out += static_cast<char>(c);
+		} else if (c < 0x20 || c == 0x7F) {
+			out += "\\x";
+			out += QByteArray::number(c, 16).rightJustified(2, '0');
+		} else {
+			out += static_cast<char>(c);
+		}
+	}
+
+	return out;
+}
+
+/**
+	@brief QetLogger::truncateMessage
+	Caps a single message at max_bytes, appending a marker stating how
+	many bytes were dropped, so one pathological caller (e.g. dumping an
+	entire XML document to qDebug()) can't consume an unbounded amount
+	of the ring's or file's byte budget.
+*/
+QByteArray QetLogger::truncateMessage(const QByteArray &input, int max_bytes)
+{
+	if (input.size() <= max_bytes) {
+		return input;
+	}
+
+	const int dropped = input.size() - max_bytes;
+	QByteArray out = input.left(max_bytes);
+	out += " ...[truncated ";
+	out += QByteArray::number(dropped);
+	out += " bytes]";
+	return out;
+}
+
+QByteArray QetLogger::formatLine(QtMsgType type, const QMessageLogContext &context, const QByteArray &sanitized_msg)
+{
+	// Includes the date (not just the time) so that a session crossing
+	// midnight -- now kept in a single file -- doesn't read as ambiguous.
+	const QByteArray timestamp = QDateTime::currentDateTime().toString(QStringLiteral("yyyy-MM-dd hh:mm:ss.zzz")).toUtf8();
+
+	const char *level = "Unknown";
+	switch (type) {
+		case QtDebugMsg:    level = "Debug";    break;
+		case QtInfoMsg:     level = "Info";     break;
+		case QtWarningMsg:  level = "Warning";  break;
+		case QtCriticalMsg: level = "Critical"; break;
+		case QtFatalMsg:    level = "Fatal";    break;
+	}
+
+	const char *file = context.file ? context.file : "";
+	const char *function = context.function ? context.function : "";
+
+	QByteArray line = timestamp;
+	line += ' ';
+	line += level;
+	line += ": ";
+	line += sanitized_msg;
+
+	if (type == QtInfoMsg) {
+		line += " \n";
+	} else {
+		line += " (";
+		line += file;
+		line += ":";
+		line += QByteArray::number(context.line ? context.line : 0);
+		line += ", ";
+		line += function;
+		line += ")\n";
+	}
+
+	return line;
+}
+
+void QetLogger::handleMessage(QtMsgType type, const QMessageLogContext &context, const QString &msg)
+{
+	if (m_disabled) {
+		legacyStderrOutput(type, context, msg);
+		return;
+	}
+
+	static thread_local bool in_handler = false;
+	if (in_handler) {
+		// The logger itself triggered a message (e.g. from inside a Qt
+		// call it made) -- drop it rather than recurse.
+		return;
+	}
+	ReentrancyGuard guard(in_handler);
+
+	const QByteArray sanitized = truncateMessage(sanitize(msg.toUtf8()), kMaxMessageBytes);
+	const QByteArray line = formatLine(type, context, sanitized);
+
+	fwrite(line.constData(), 1, static_cast<size_t>(line.size()), stderr);
+
+	m_ring.append(line);
+	writeToFile(line, type);
+}
+
+void QetLogger::pruneOldLogFiles(int days)
+{
+	if (m_disabled) {
+		return;
+	}
+
+	const QDate today = QDate::currentDate();
+	const QStringList filters = {
+		QStringLiteral("????????.log"),   // base files, e.g. 20260803.log
+		QStringLiteral("????????.?.log"), // rotated files, e.g. 20260803.1.log
+	};
+
+	const QDir dir(m_log_dir);
+	const auto entries = dir.entryInfoList(filters, QDir::Files);
+	for (const QFileInfo &file_info : entries) {
+		if (!file_info.isFile()) {
+			continue;
+		}
+		// lastModified(), not lastRead(): reading the log (opening it to
+		// attach to a bug report, a backup job, an indexer) must not
+		// reset the retention clock and keep it alive indefinitely.
+		if (file_info.lastModified().date().daysTo(today) > days) {
+			QFile::remove(file_info.absoluteFilePath());
+		}
+	}
+}
+
+// --- Step 5: getting the data back out ----------------------------------
+
+bool QetLogger::hasPendingCrashDump() const
+{
+	if (m_disabled) {
+		return false;
+	}
+	const QFileInfo info(crashDumpPath());
+	return info.exists() && info.isFile() && info.size() > 0;
+}
+
+QByteArray QetLogger::pendingCrashDumpContents() const
+{
+	QFile file(crashDumpPath());
+	if (!file.open(QIODevice::ReadOnly)) {
+		return QByteArray();
+	}
+	return redact(file.readAll());
+}
+
+void QetLogger::clearPendingCrashDump()
+{
+	QFile::remove(crashDumpPath());
+}
+
+QByteArray QetLogger::buildDiagnosticsReport() const
+{
+	QByteArray header;
+	header += "QElectroTech diagnostics report\n";
+	header += "Generated: " % QDateTime::currentDateTime().toString(Qt::ISODate) % "\n";
+	header += "Version: " % QetVersion::displayedVersion() % "\n";
+	header += "Git: " GIT_COMMIT_SHA "\n";
+	header += "OS: " % QSysInfo::prettyProductName() % " (" % QSysInfo::currentCpuArchitecture() % ")\n";
+	header += "Qt: " QT_VERSION_STR "\n";
+	header += "---\n";
+
+	QByteArray body;
+	QFile file(currentLogFilePath());
+	if (file.open(QIODevice::ReadOnly)) {
+		body = file.readAll();
+	} else {
+		// Fall back to the in-memory ring if the file itself can't be
+		// read (e.g. file output already failed this session).
+		for (const QByteArray &line : m_ring.snapshot()) {
+			body += line;
+		}
+	}
+
+	return redact(header + body);
+}
+
+/**
+	@brief QetLogger::redact
+	Replaces the user's home directory with "~" wherever it appears.
+	Applied before a crash dump or a diagnostics report is ever shown to
+	the user: both are destined to be attached to a public bug tracker,
+	and an absolute path under the home directory leaks the account name
+	(discussion #644's privacy section: "/home/laurent/... leaks a
+	username"). This is the one redaction implemented here; the
+	discussion's fancier "optionally redact project filenames too" is
+	not attempted -- reliably telling a project path apart from
+	arbitrary log text is a much fuzzier problem than a literal prefix
+	match against a known directory.
+*/
+QByteArray QetLogger::redact(const QByteArray &input)
+{
+	const QByteArray home = QDir::homePath().toUtf8();
+	if (home.isEmpty()) {
+		return input;
+	}
+	QByteArray out = input;
+	out.replace(home, QByteArrayLiteral("~"));
+	return out;
+}

sources/logging/qetlogger.h

@@ -0,0 +1,159 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef QETLOGGER_H
+#define QETLOGGER_H
+
+#include "logring.h"
+
+#include <QFile>
+#include <QMutex>
+#include <QString>
+#include <QtGlobal>
+
+/**
+	@brief The QetLogger class
+	Rework of QET's diagnostic logging (discussion #644, steps 1-3):
+
+	- Step 1: one file handle held open for the session under a mutex
+	  instead of opening/closing per message; the log path (including
+	  the date-stamped filename) is resolved exactly once, at init(),
+	  instead of being recomputed on every message -- a session that
+	  crosses midnight now stays in one file; retention now uses
+	  lastModified() instead of lastRead(); stderr and file output both
+	  use UTF-8 explicitly (previously stderr used the local 8-bit
+	  codec and the file's encoding silently differed between Qt5 and
+	  Qt6).
+	- Step 2: the previously-unbounded daily file is now size-capped
+	  and rotated (kMaxFileBytes per file, kRotationKeep old files kept
+	  beyond the current one); each message is truncated to
+	  kMaxMessageBytes and control characters are escaped before being
+	  written, so one pathological caller can't blow the size budget or
+	  forge log lines; the log file is refused if it already exists as
+	  a symlink and is created owner-read/write only.
+	- Step 3: every formatted line is also appended to an in-memory
+	  LogRing (see logring.h) -- always on, fixed capacity, allocation-
+	  free on the hot path.
+	- Step 4: installCrashHandler() wires the ring up to CrashHandler
+	  (see crashhandler.h), so a SIGSEGV/SIGABRT/SIGBUS/SIGFPE/SIGILL (or,
+	  on Windows, an unhandled structured exception) flushes the ring to
+	  a fixed crash-dump file before the process dies.
+	- Step 5: hasPendingCrashDump()/pendingCrashDumpContents()/
+	  clearPendingCrashDump() let startup code (see QETApp::checkBackupFiles())
+	  notice and offer an unretrieved crash dump from the *previous* run;
+	  buildDiagnosticsReport() is the equivalent for a manual "save a
+	  report right now" action on the *current*, still-running session.
+	  Both go through redact() before ever reaching the user, since both
+	  are destined for a public bug tracker.
+
+	Deliberately NOT included: log categories, a full session header
+	beyond what the crash dump/report already carry, repeat collapsing,
+	rate limiting. Those are listed in discussion #644 under "best
+	practices worth building in", not part of the numbered steps.
+
+	Escape hatch: if QET_LOG_DISABLE=1 is set in the environment at
+	init() time, this class does nothing beyond a minimal, independent
+	stderr passthrough -- no ring, no file, no rotation -- so a problem
+	in this rework can be worked around without a rebuild.
+*/
+class QetLogger
+{
+	public:
+		static constexpr qint64 kMaxFileBytes = 2 * 1024 * 1024; // 2 MiB per file
+		static constexpr int kRotationKeep = 4;                  // .1.log .. .4.log
+		static constexpr int kMaxMessageBytes = 4096;             // per-message truncation
+
+		static QetLogger &instance();
+
+		/// Must be called exactly once, from main(), before
+		/// qInstallMessageHandler(). Resolves the log directory and the
+		/// session's log filename, and opens the file.
+		void init();
+
+		/// Step 4: installs the crash handler (see crashhandler.h). Must
+		/// be called after init() (the ring and the dump path must exist
+		/// first) and, like init(), only once.
+		void installCrashHandler();
+
+		/// The function installed via qInstallMessageHandler() forwards here.
+		void handleMessage(QtMsgType type, const QMessageLogContext &context, const QString &msg);
+
+		/// Replaces the old delete_old_log_files(): same call shape, fixed
+		/// to use lastModified() (not lastRead()) and to also match rotated
+		/// file names.
+		void pruneOldLogFiles(int days);
+
+		/// Snapshot of the in-memory ring, oldest first.
+		QVector<QByteArray> ringSnapshot() const {return m_ring.snapshot();}
+
+		// --- Step 5: getting the data back out -------------------------
+
+		/// True if a previous run's crash handler left an unretrieved
+		/// dump behind.
+		bool hasPendingCrashDump() const;
+
+		/// Raw contents of the pending crash dump, or an empty array if
+		/// there isn't one. Does not delete it -- call
+		/// clearPendingCrashDump() once it has been offered to the user.
+		QByteArray pendingCrashDumpContents() const;
+
+		/// Deletes the pending crash dump file. Call after the user has
+		/// been offered it (whether they chose to save it or not) so it
+		/// is never offered a second time.
+		void clearPendingCrashDump();
+
+		/// Builds a redacted diagnostics bundle from the *current* session
+		/// (header + this session's log file so far) for the manual
+		/// "Save report" action -- as opposed to pendingCrashDumpContents(),
+		/// which is about a *previous*, already-terminated session.
+		QByteArray buildDiagnosticsReport() const;
+
+		/// Replaces occurrences of the user's home directory with "~".
+		/// Applied to both the crash dump and buildDiagnosticsReport()
+		/// before they are ever shown to the user, since both are
+		/// destined for a public bug tracker.
+		static QByteArray redact(const QByteArray &input);
+
+	private:
+		QetLogger() = default;
+		QetLogger(const QetLogger &) = delete;
+
+		bool ensureFileOpenLocked();
+		void rotateLocked();
+		void writeToFile(const QByteArray &line, QtMsgType type);
+		QString rotatedPath(int index) const;
+		QString crashDumpPath() const;
+		QString currentLogFilePath() const;
+
+		static QByteArray sanitize(const QByteArray &input);
+		static QByteArray truncateMessage(const QByteArray &input, int max_bytes);
+		static QByteArray formatLine(QtMsgType type, const QMessageLogContext &context, const QByteArray &sanitized_msg);
+
+		bool m_disabled = false;
+
+		QString m_log_dir;
+		QString m_base_name; // e.g. "20260803", resolved once in init()
+
+		QMutex m_file_mutex;
+		QFile m_file;
+		qint64 m_bytes_written_current_file = 0;
+		bool m_file_output_ok = false;
+
+		LogRing m_ring;
+};
+
+#endif // QETLOGGER_H

sources/logging/ui/diagnosticsreportdialog.cpp

@@ -0,0 +1,91 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "diagnosticsreportdialog.h"
+
+#include "../../qetmessagebox.h"
+
+#include <QDialogButtonBox>
+#include <QFile>
+#include <QFileDialog>
+#include <QFontDatabase>
+#include <QLabel>
+#include <QPlainTextEdit>
+#include <QPushButton>
+#include <QVBoxLayout>
+
+DiagnosticsReportDialog::DiagnosticsReportDialog(
+		const QString &title,
+		const QString &intro,
+		const QByteArray &content,
+		QWidget *parent) :
+	QDialog(parent)
+{
+	setWindowTitle(title);
+	resize(700, 500);
+
+	auto *layout = new QVBoxLayout(this);
+
+	auto *intro_label = new QLabel(intro, this);
+	intro_label->setWordWrap(true);
+	layout->addWidget(intro_label);
+
+	auto *preview = new QPlainTextEdit(this);
+	preview->setReadOnly(true);
+	preview->setLineWrapMode(QPlainTextEdit::NoWrap);
+	preview->setFont(QFontDatabase::systemFont(QFontDatabase::FixedFont));
+	preview->setPlainText(QString::fromUtf8(content));
+	layout->addWidget(preview);
+
+	auto *buttons = new QDialogButtonBox(this);
+	QPushButton *save_button = buttons->addButton(tr("Enregistrer..."), QDialogButtonBox::ActionRole);
+	buttons->addButton(QDialogButtonBox::Close);
+	connect(save_button, &QPushButton::clicked, this, &DiagnosticsReportDialog::saveToFile);
+	connect(buttons, &QDialogButtonBox::rejected, this, &QDialog::reject);
+	connect(buttons->button(QDialogButtonBox::Close), &QPushButton::clicked, this, &QDialog::accept);
+	layout->addWidget(buttons);
+
+	// Stash the content for saveToFile(); the preview widget already
+	// holds a QString copy but we save the original UTF-8 bytes to avoid
+	// any round-trip surprises.
+	setProperty("qet_report_content", content);
+}
+
+void DiagnosticsReportDialog::saveToFile()
+{
+	const QString path = QFileDialog::getSaveFileName(
+			this,
+			tr("Enregistrer le rapport de diagnostic"),
+			QStringLiteral("qet-diagnostic-report.txt"),
+			tr("Fichiers texte (*.txt);;Tous les fichiers (*)"));
+
+	if (path.isEmpty()) {
+		return;
+	}
+
+	QFile file(path);
+	if (!file.open(QIODevice::WriteOnly)) {
+		QET::QetMessageBox::critical(
+				this,
+				tr("Erreur"),
+				tr("Impossible d'écrire dans le fichier « %1 ».").arg(path));
+		return;
+	}
+
+	file.write(property("qet_report_content").toByteArray());
+	file.close();
+}

sources/logging/ui/diagnosticsreportdialog.h

@@ -0,0 +1,51 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef DIAGNOSTICSREPORTDIALOG_H
+#define DIAGNOSTICSREPORTDIALOG_H
+
+#include <QDialog>
+
+/**
+	@brief The DiagnosticsReportDialog class
+	Discussion #644, step 5: "Show what's in it before saving -- the user
+	is about to attach this to a public tracker." Used for both the
+	after-a-crash offer (QETApp::checkBackupFiles()) and the manual
+	"Help > Diagnostics > Save report" action -- the only difference
+	between the two is the intro text and where the content comes from
+	(QetLogger::pendingCrashDumpContents() vs. buildDiagnosticsReport()).
+
+	The content passed in is expected to already be redacted
+	(QetLogger::redact()) -- this dialog just displays and optionally
+	saves whatever it's given.
+*/
+class DiagnosticsReportDialog : public QDialog
+{
+		Q_OBJECT
+
+	public:
+		explicit DiagnosticsReportDialog(
+				const QString &title,
+				const QString &intro,
+				const QByteArray &content,
+				QWidget *parent = nullptr);
+
+	private slots:
+		void saveToFile();
+};
+
+#endif // DIAGNOSTICSREPORTDIALOG_H

sources/main.cpp

@@ -16,6 +16,8 @@
 	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "cli_export.h"
+#include "logging/eventloopwatchdog.h"
+#include "logging/qetlogger.h"
 #include "machine_info.h"
 #include "qet.h"
 #include "qetapp.h"
@@ -62,131 +64,16 @@ class EarlyFileOpenCatcher : public QObject
 #endif
 
 /**
-	@brief myMessageOutput
-	for debugging
-	@param type : the messages that can be sent to a message handler
-	@param context : were? wat?
-	@param msg : Message
+	@brief qetLogMessageHandler
+	Installed via qInstallMessageHandler(); forwards to QetLogger, which
+	holds all the actual formatting/ring/rotation state. See
+	logging/qetlogger.h for the rationale (discussion #644).
 */
-void myMessageOutput(QtMsgType type,
+void qetLogMessageHandler(QtMsgType type,
 			 const QMessageLogContext &context,
 			 const QString &msg)
 {
-
-	QString txt=QTime::currentTime().toString("hh:mm:ss.zzz");
-	QByteArray dbs =txt.toLocal8Bit();
-	QByteArray localMsg = msg.toLocal8Bit();
-	const char *file = context.file ? context.file : "";
-	const char *function = context.function ? context.function : "";
-
-	switch (type) {
-	case QtDebugMsg:
-		fprintf(stderr,
-			"%s Debug: %s (%s:%u, %s)\n",
-			dbs.constData(),
-			localMsg.constData(),
-			file,
-			context.line,
-			function);
-		txt+=" Debug: ";
-		break;
-	case QtInfoMsg:
-		fprintf(stderr,
-			"%s Info: %s \n",
-			dbs.constData(),
-			localMsg.constData());
-		txt+=" Info: ";
-		break;
-	case QtWarningMsg:
-		fprintf(stderr,
-			"%s Warning: %s (%s:%u, %s)\n",
-			dbs.constData(),
-			localMsg.constData(),
-			file, context.line,
-			function);
-		txt+=" Warning: ";
-		break;
-	case QtCriticalMsg:
-		fprintf(stderr,
-			"%s Critical: %s (%s:%u, %s)\n",
-			dbs.constData(),
-			localMsg.constData(),
-			file,
-			context.line,
-			function);
-		txt+=" Critical: ";
-		break;
-	case QtFatalMsg:
-		fprintf(stderr,
-			"%s Fatal: %s (%s:%u, %s)\n",
-			dbs.constData(),
-			localMsg.constData(),
-			file,
-			context.line,
-			function);
-		txt+=" Fatal: ";
-		break;
-	default:
-		fprintf(stderr,
-			"%s Unknown: %s (%s:%u, %s)\n",
-			dbs.constData(),
-			localMsg.constData(),
-			file,
-			context.line,
-			function);
-		txt+=" Unknown: ";
-	}
-	txt+= msg;
-	if(type==QtInfoMsg){
-		txt+=" \n";
-	} else {
-		txt+= " (";
-		txt+= context.file ? context.file : "";
-		txt+= ":";
-		txt+=QString::number(context.line ? context.line :0);
-		txt+= ", ";
-		txt+= context.function ? context.function : "";
-		txt+=")\n";
-	}
-	QFile outFile(QETApp::dataDir()
-			  +"/"
-			  +QDate::currentDate().toString("yyyyMMdd")
-			  +".log");
-	if(outFile.open(QIODevice::WriteOnly | QIODevice::Append))
-	{
-		QTextStream ts(&outFile);
-		ts << txt;
-	}
-	outFile.close();
-}
-
-/**
-	@brief delete_old_log_files
-	delete old log files
-	@param days : max days old
-*/
-void delete_old_log_files(int days)
-{
-	const QDate today = QDate::currentDate();
-	const QString path = QETApp::dataDir() % "/";
-
-	QString filter("%1%1%1%1%1%1%1%1.log"); // pattern
-	filter = filter.arg("[0123456789]"); // valid characters
-
-	Q_FOREACH (auto fileInfo,
-		   QDir(path).entryInfoList(
-			   QStringList(filter),
-			   QDir::Files))
-	{
-		if (fileInfo.lastRead().date().daysTo(today) > days)
-		{
-			QString filepath = fileInfo.absoluteFilePath();
-			QDir deletefile;
-			deletefile.setPath(filepath);
-			deletefile.remove(filepath);
-			qDebug() << "File " % filepath % " is deleted!";
-		}
-	}
+	QetLogger::instance().handleMessage(type, context, msg);
 }
 
 /**
@@ -253,13 +140,25 @@ QGuiApplication::setHighDpiScaleFactorRoundingPolicy(QetSettings::hdpiScaleFacto
 		}
 	}
 
+	// Resolve the logger's state (log directory, session filename, open
+	// file handle) explicitly here, immediately before installing the
+	// handler -- not implicitly on whichever thread happens to log
+	// first. See QetLogger::init().
+	//
 	// Install the log-file message handler BEFORE the application starts:
 	// QETApp's constructor does the whole startup (collections, editor,
 	// opening the projects given on the command line), so installing the
 	// handler afterwards - as was done in the startup worker below - meant
 	// exactly the interesting lines (collection and project load timers)
 	// went to stderr, which is invisible in a Windows GUI session.
-	qInstallMessageHandler(myMessageOutput);
+	QetLogger::instance().init();
+	qInstallMessageHandler(qetLogMessageHandler);
+	// Step 4 (discussion #644): flush the ring to a crash-dump file if
+	// the process dies from here on. Installed right after the ring
+	// exists (init() just constructed it) and as early as reasonably
+	// possible, so it also covers whatever runs between here and
+	// QETApp's own construction below.
+	QetLogger::instance().installCrashHandler();
 
 	SingleApplication app(argc, argv, true);
 #ifdef Q_OS_MACOS
@@ -308,9 +207,16 @@ QGuiApplication::setHighDpiScaleFactorRoundingPolicy(QetSettings::hdpiScaleFacto
 	{
 		qInfo("Start-up");
 		// delete old log files of max 7 days old.
-		delete_old_log_files(7);
+		QetLogger::instance().pruneOldLogFiles(7);
 		MachineInfo::instance()->send_info_to_debug();
 	});
+
+	// Constructed here rather than earlier: start() measures ticks against
+	// the event loop app.exec() is about to run, so there is no point
+	// (and no accurate baseline) before this line.
+	EventLoopWatchdog watchdog;
+	watchdog.start();
+
 	return app.exec();
 }
 

sources/newelementwizard.cpp

@@ -19,6 +19,7 @@
 
 #include "ElementsCollection/elementcollectionitem.h"
 #include "ElementsCollection/elementscollectionmodel.h"
+#include "ElementsCollection/elementstreeview.h"
 #include "NameList/ui/namelistwidget.h"
 #include "editor/ui/qetelementeditor.h"
 #include "qetmessagebox.h"
@@ -85,7 +86,7 @@ QWizardPage *NewElementWizard::buildStep1()
 	page -> setSubTitle(tr("Sélectionnez une catégorie dans laquelle enregistrer le nouvel élément.", "wizard page subtitle"));
 	QVBoxLayout *layout = new QVBoxLayout();
 
-	m_tree_view = new QTreeView(this);
+	m_tree_view = new ElementsTreeView(this);
 
 	m_model = new ElementsCollectionModel(m_tree_view);
 	m_model->hideElement();

sources/print/projectprintwindow.cpp

@@ -161,6 +161,7 @@ ProjectPrintWindow::ProjectPrintWindow(QETProject *project, QPrinter *printer, Q
 	ui->m_draw_border_cb->setChecked(exp.draw_border);
 	ui->m_draw_titleblock_cb->setChecked(exp.draw_titleblock);
 	ui->m_draw_terminal_cb->setChecked(exp.draw_terminals);
+	ui->m_draw_terminal_names_cb->setChecked(exp.draw_terminal_names);
 	ui->m_keep_conductor_color_cb->setChecked(exp.draw_colored_conductors);
 
 	ui->m_date_cb->blockSignals(true);
@@ -523,6 +524,7 @@ ExportProperties ProjectPrintWindow::exportProperties() const
 	exp.draw_border             = ui->m_draw_border_cb->isChecked();
 	exp.draw_titleblock         = ui->m_draw_titleblock_cb->isChecked();
 	exp.draw_terminals          = ui->m_draw_terminal_cb->isChecked();
+	exp.draw_terminal_names     = ui->m_draw_terminal_names_cb->isChecked();
 	exp.draw_colored_conductors = ui->m_keep_conductor_color_cb->isChecked();
 	exp.draw_grid = false;
 	exp.draw_guides = false;
@@ -796,6 +798,7 @@ void ProjectPrintWindow::on_m_draw_border_cb_clicked()          { m_preview->upd
 void ProjectPrintWindow::on_m_draw_titleblock_cb_clicked()      { m_preview->updatePreview(); }
 void ProjectPrintWindow::on_m_keep_conductor_color_cb_clicked() { m_preview->updatePreview(); }
 void ProjectPrintWindow::on_m_draw_terminal_cb_clicked()        { m_preview->updatePreview(); }
+void ProjectPrintWindow::on_m_draw_terminal_names_cb_clicked()  { m_preview->updatePreview(); }
 void ProjectPrintWindow::on_m_fit_in_page_cb_clicked()          { m_preview->updatePreview(); }
 void ProjectPrintWindow::on_m_use_full_page_cb_clicked()
 {

sources/print/projectprintwindow.h

@@ -55,6 +55,7 @@ class ProjectPrintWindow : public QMainWindow
 		void on_m_draw_titleblock_cb_clicked();
 		void on_m_keep_conductor_color_cb_clicked();
 		void on_m_draw_terminal_cb_clicked();
+		void on_m_draw_terminal_names_cb_clicked();
 		void on_m_fit_in_page_cb_clicked();
 		void on_m_use_full_page_cb_clicked();
 		void on_m_zoom_out_action_triggered();

sources/print/projectprintwindow.ui

@@ -183,6 +183,16 @@
          </property>
         </widget>
        </item>
+       <item>
+         <widget class="QCheckBox" name="m_draw_terminal_names_cb">
+          <property name="text">
+           <string>Dessiner les noms des bornes</string>
+          </property>
+          <property name="checked">
+           <bool>false</bool>
+          </property>
+         </widget>
+       </item>
       </layout>
      </widget>
     </item>

sources/projectview.cpp

@@ -842,7 +842,7 @@ void ProjectView::initWidgets()
 	QHBoxLayout *TopRightCorner_Layout = new QHBoxLayout();
 	TopRightCorner_Layout->setContentsMargins(0,0,0,0);
 	// some place left to the 'next_right_view_button' button
-	TopRightCorner_Layout->insertSpacing(1,10);
+	TopRightCorner_Layout->addSpacing(10);
 
 	QHBoxLayout *TopLeftCorner_Layout = new QHBoxLayout();
 	TopLeftCorner_Layout->setContentsMargins(0,0,0,0);

sources/properties/elementdata.cpp

@@ -267,6 +267,211 @@ QDomElement ElementData::kindInfoToXml(QDomDocument &document)
 	return returned_elmt;
 }
 
+/**
+ * @brief ElementData::plcMasterDataToXml
+ * Serialize PLC master data to XML (used by Element::toXml for diagram instances)
+ */
+QDomElement ElementData::plcMasterDataToXml(QDomDocument &document) const
+{
+	auto xml_plc = document.createElement(QStringLiteral("plcMasterData"));
+	xml_plc.setAttribute(QStringLiteral("rowHeight"),
+		QString::number(m_plc_master_data.rowHeight, 'f', 2));
+
+	// Save break positions
+	{
+		auto xml_breaks = document.createElement(QStringLiteral("breakPositions"));
+		for (int bp : m_plc_master_data.breakPositions) {
+			auto xml_bp = document.createElement(QStringLiteral("break"));
+			xml_bp.appendChild(document.createTextNode(QString::number(bp)));
+			xml_breaks.appendChild(xml_bp);
+		}
+		xml_plc.appendChild(xml_breaks);
+	}
+
+	// Save column widths
+	auto xml_col_widths = document.createElement(QStringLiteral("columnWidths"));
+	for (auto it = m_plc_master_data.colWidths.constBegin();
+		 it != m_plc_master_data.colWidths.constEnd(); ++it) {
+		auto xml_col = document.createElement(QStringLiteral("column"));
+		xml_col.setAttribute(QStringLiteral("index"), it.key());
+		xml_col.setAttribute(QStringLiteral("width"), QString::number(it.value(), 'f', 2));
+		xml_col_widths.appendChild(xml_col);
+	}
+	xml_plc.appendChild(xml_col_widths);
+
+	// Save column visibility
+	auto xml_col_vis = document.createElement(QStringLiteral("columnVisibility"));
+	for (auto it = m_plc_master_data.colVisible.constBegin();
+		 it != m_plc_master_data.colVisible.constEnd(); ++it) {
+		auto xml_col = document.createElement(QStringLiteral("column"));
+		xml_col.setAttribute(QStringLiteral("index"), it.key());
+		xml_col.setAttribute(QStringLiteral("visible"), it.value() ? "true" : "false");
+		xml_col_vis.appendChild(xml_col);
+	}
+	xml_plc.appendChild(xml_col_vis);
+
+	// Save fonts
+	if (!m_plc_master_data.headerFont.family().isEmpty()) {
+		auto xml_hfont = document.createElement(QStringLiteral("headerFont"));
+		xml_hfont.setAttribute(QStringLiteral("family"), m_plc_master_data.headerFont.family());
+		xml_hfont.setAttribute(QStringLiteral("size"), m_plc_master_data.headerFont.pointSize());
+		xml_hfont.setAttribute(QStringLiteral("bold"), m_plc_master_data.headerFont.bold() ? "true" : "false");
+		xml_plc.appendChild(xml_hfont);
+	}
+	if (!m_plc_master_data.cellFont.family().isEmpty()) {
+		auto xml_cfont = document.createElement(QStringLiteral("cellFont"));
+		xml_cfont.setAttribute(QStringLiteral("family"), m_plc_master_data.cellFont.family());
+		xml_cfont.setAttribute(QStringLiteral("size"), m_plc_master_data.cellFont.pointSize());
+		xml_cfont.setAttribute(QStringLiteral("bold"), m_plc_master_data.cellFont.bold() ? "true" : "false");
+		xml_plc.appendChild(xml_cfont);
+	}
+
+	// Save custom column names
+	if (!m_plc_master_data.columnNames.isEmpty()) {
+		auto xml_names = document.createElement(QStringLiteral("columnNames"));
+		for (int i = 0; i < m_plc_master_data.columnNames.size(); ++i) {
+			auto xml_name = document.createElement(QStringLiteral("column"));
+			xml_name.setAttribute(QStringLiteral("index"), i);
+			xml_name.appendChild(document.createTextNode(m_plc_master_data.columnNames.at(i)));
+			xml_names.appendChild(xml_name);
+		}
+		xml_plc.appendChild(xml_names);
+	}
+
+	// Save column order
+	if (!m_plc_master_data.columnOrder.isEmpty()) {
+		auto xml_order = document.createElement(QStringLiteral("columnOrder"));
+		QString order_str;
+		for (int i = 0; i < m_plc_master_data.columnOrder.size(); ++i) {
+			if (i > 0) order_str += QStringLiteral(",");
+			order_str += QString::number(m_plc_master_data.columnOrder.at(i));
+		}
+		xml_order.appendChild(document.createTextNode(order_str));
+		xml_plc.appendChild(xml_order);
+	}
+
+	// Save showHeaders
+	{
+		auto xml_sh = document.createElement(QStringLiteral("showHeaders"));
+		xml_sh.appendChild(document.createTextNode(
+			m_plc_master_data.showHeaders ? QStringLiteral("1") : QStringLiteral("0")));
+		xml_plc.appendChild(xml_sh);
+	}
+
+	// Save IO entries
+	auto xml_ios = document.createElement(QStringLiteral("plcIOs"));
+	for (const auto &io : m_plc_master_data.ios) {
+		auto xml_io = document.createElement(QStringLiteral("plcIO"));
+		xml_io.setAttribute(QStringLiteral("type"), plcIOTypeToString(io.type));
+		xml_io.setAttribute(QStringLiteral("address"), io.address);
+		xml_io.setAttribute(QStringLiteral("functionText"), io.functionText);
+		xml_io.setAttribute(QStringLiteral("comment"), io.comment);
+		xml_io.setAttribute(QStringLiteral("crossRef"), io.crossRef);
+		xml_io.setAttribute(QStringLiteral("terminalCount"), io.terminalCount);
+		for (const auto &t : io.terminals) {
+			auto xml_term = document.createElement(QStringLiteral("terminal"));
+			xml_term.appendChild(document.createTextNode(t));
+			xml_io.appendChild(xml_term);
+		}
+		xml_ios.appendChild(xml_io);
+	}
+	xml_plc.appendChild(xml_ios);
+
+	return xml_plc;
+}
+
+/**
+ * @brief ElementData::plcMasterDataFromXml
+ * Deserialize PLC master data from XML
+ */
+void ElementData::plcMasterDataFromXml(const QDomElement &xml_plc)
+{
+	if (xml_plc.isNull())
+		return;
+
+	// Reset PLC data before loading to avoid appending to existing data
+	m_plc_master_data = PlcMasterData();
+
+	m_plc_master_data.rowHeight = xml_plc.attribute(
+		QStringLiteral("rowHeight"), QStringLiteral("8.0")).toDouble();
+
+	// Load break positions
+	auto xml_breaks = xml_plc.firstChildElement(QStringLiteral("breakPositions"));
+	for (const auto &xml_bp : QETXML::findInDomElement(xml_breaks, QStringLiteral("break"))) {
+		m_plc_master_data.breakPositions.append(xml_bp.text().toInt());
+	}
+
+	// Load column widths
+	auto xml_col_widths = xml_plc.firstChildElement(QStringLiteral("columnWidths"));
+	for (const auto &xml_col : QETXML::findInDomElement(xml_col_widths, QStringLiteral("column"))) {
+		int idx = xml_col.attribute(QStringLiteral("index")).toInt();
+		qreal w = xml_col.attribute(QStringLiteral("width")).toDouble();
+		m_plc_master_data.colWidths.insert(idx, w);
+	}
+
+	// Load column visibility
+	auto xml_col_vis = xml_plc.firstChildElement(QStringLiteral("columnVisibility"));
+	for (const auto &xml_col : QETXML::findInDomElement(xml_col_vis, QStringLiteral("column"))) {
+		int idx = xml_col.attribute(QStringLiteral("index")).toInt();
+		bool vis = xml_col.attribute(QStringLiteral("visible")) == QLatin1String("true");
+		m_plc_master_data.colVisible.insert(idx, vis);
+	}
+
+	// Load fonts
+	auto xml_hfont = xml_plc.firstChildElement(QStringLiteral("headerFont"));
+	if (!xml_hfont.isNull()) {
+		m_plc_master_data.headerFont.setFamily(xml_hfont.attribute(QStringLiteral("family")));
+		m_plc_master_data.headerFont.setPointSize(xml_hfont.attribute(QStringLiteral("size")).toInt());
+		m_plc_master_data.headerFont.setBold(xml_hfont.attribute(QStringLiteral("bold")) == QLatin1String("true"));
+	}
+	auto xml_cfont = xml_plc.firstChildElement(QStringLiteral("cellFont"));
+	if (!xml_cfont.isNull()) {
+		m_plc_master_data.cellFont.setFamily(xml_cfont.attribute(QStringLiteral("family")));
+		m_plc_master_data.cellFont.setPointSize(xml_cfont.attribute(QStringLiteral("size")).toInt());
+		m_plc_master_data.cellFont.setBold(xml_cfont.attribute(QStringLiteral("bold")) == QLatin1String("true"));
+	}
+
+	// Load custom column names
+	auto xml_names = xml_plc.firstChildElement(QStringLiteral("columnNames"));
+	for (const auto &xml_col : QETXML::findInDomElement(xml_names, QStringLiteral("column"))) {
+		int idx = xml_col.attribute(QStringLiteral("index")).toInt();
+		while (m_plc_master_data.columnNames.size() <= idx)
+			m_plc_master_data.columnNames.append(QString());
+		m_plc_master_data.columnNames.replace(idx, xml_col.text());
+	}
+
+	// Load column order
+	auto xml_order = xml_plc.firstChildElement(QStringLiteral("columnOrder"));
+	if (!xml_order.isNull()) {
+		QStringList order_str_list = xml_order.text().split(',');
+		for (const auto &s : order_str_list) {
+			m_plc_master_data.columnOrder.append(s.trimmed().toInt());
+		}
+	}
+
+	// Load showHeaders
+	auto xml_sh = xml_plc.firstChildElement(QStringLiteral("showHeaders"));
+	if (!xml_sh.isNull()) {
+		m_plc_master_data.showHeaders = xml_sh.text() == QLatin1String("1");
+	}
+
+	// Load IO entries
+	auto xml_ios = xml_plc.firstChildElement(QStringLiteral("plcIOs"));
+	for (const auto &xml_io : QETXML::findInDomElement(xml_ios, QStringLiteral("plcIO"))) {
+		PlcIO io;
+		io.type = plcIOTypeFromString(xml_io.attribute(QStringLiteral("type")));
+		io.address = xml_io.attribute(QStringLiteral("address"));
+		io.functionText = xml_io.attribute(QStringLiteral("functionText"));
+		io.comment = xml_io.attribute(QStringLiteral("comment"));
+		io.crossRef = xml_io.attribute(QStringLiteral("crossRef"));
+		io.terminalCount = xml_io.attribute(QStringLiteral("terminalCount")).toInt();
+		for (const auto &xml_term : QETXML::findInDomElement(xml_io, QStringLiteral("terminal"))) {
+			io.terminals.append(xml_term.text());
+		}
+		m_plc_master_data.ios.append(io);
+	}
+}
+
 /**
  * @brief ElementData::setTerminalType
  * Override the terminal type by \p t_type

sources/properties/elementdata.h

@@ -130,6 +130,11 @@ class ElementData : public PropertiesInterface
 			QList<int> columnOrder;                 ///< Column display order (logical indices)
 			bool showHeaders = true;                ///< Show column headers on sheet
 
+			PlcMasterData() {
+				headerFont.setFamily(QString());
+				cellFont.setFamily(QString());
+			}
+
 			bool operator==(const PlcMasterData &other) const {
 				return ios == other.ios
 					&& breakPositions == other.breakPositions
@@ -201,6 +206,8 @@ class ElementData : public PropertiesInterface
 		QDomElement toXml(QDomDocument &xml_element) const override;
 		bool fromXml(const QDomElement &xml_element) override;
 		QDomElement kindInfoToXml(QDomDocument &document);
+	QDomElement plcMasterDataToXml(QDomDocument &document) const;
+	void plcMasterDataFromXml(const QDomElement &xml_plc);
 
 		void setTerminalType(ElementData::TerminalType t_type);
 		ElementData::TerminalType terminalType() const;

sources/properties/terminaldata.cpp

@@ -17,6 +17,7 @@
 */
 #include "terminaldata.h"
 
+#include "../qetapp.h"
 #include "../utils/qetutils.h"
 
 #include <QGraphicsObject>
@@ -38,6 +39,7 @@ TerminalData::TerminalData(QGraphicsObject *parent):
 
 void TerminalData::init()
 {
+	m_label_font = QETApp::diagramTextsFont();
 }
 
 TerminalData::~TerminalData()

sources/qetapp.cpp

@@ -40,6 +40,8 @@
 #include "machine_info.h"
 #include "TerminalStrip/ui/terminalstripeditorwindow.h"
 #include "qetversion.h"
+#include "logging/qetlogger.h"
+#include "logging/ui/diagnosticsreportdialog.h"
 
 #include <cstdlib>
 #include <iostream>
@@ -2577,6 +2579,10 @@ void QETApp::checkBackupFiles()
 	}
 
 	if (stale_files.isEmpty()) {
+		// Only offer an unretrieved crash dump when there's no project
+		// to recover this run -- discussion #644 step 5 is explicit
+		// that the two prompts must never both show at once.
+		checkCrashDump();
 		return;
 	}
 
@@ -2630,6 +2636,53 @@ void QETApp::checkBackupFiles()
 	}
 }
 
+/**
+	@brief QETApp::checkCrashDump
+	Discussion #644, step 5: if the crash handler (step 4) left an
+	unretrieved dump from a previous run, offer it to the user. Only
+	called from checkBackupFiles() when there was no stale project file
+	to recover this run, so the two prompts never both show at once.
+*/
+void QETApp::checkCrashDump()
+{
+	QetLogger &logger = QetLogger::instance();
+	if (!logger.hasPendingCrashDump()) {
+		return;
+	}
+
+	const QByteArray content = logger.pendingCrashDumpContents();
+
+	DiagnosticsReportDialog dialog(
+			tr("Rapport de plantage"),
+			tr("QElectroTech ne s'est pas fermé correctement lors de sa dernière exécution.\n"
+			   "Voici les derniers messages enregistrés avant l'arrêt -- vous pouvez les "
+			   "enregistrer pour les joindre à un rapport de bug."),
+			content);
+	dialog.exec();
+
+	// Offered once, then marked retrieved -- regardless of whether the
+	// user chose to save it -- so it is never offered a second time.
+	logger.clearPendingCrashDump();
+}
+
+/**
+	@brief QETApp::showDiagnosticsReport
+	Discussion #644, step 5: the manual "Help > Diagnostics > Save
+	report" action. Unlike checkCrashDump(), this is about the *current*,
+	still-running session, not a previous one.
+*/
+void QETApp::showDiagnosticsReport()
+{
+	const QByteArray content = QetLogger::instance().buildDiagnosticsReport();
+
+	DiagnosticsReportDialog dialog(
+			tr("Rapport de diagnostic"),
+			tr("Ceci contient les derniers messages de journalisation de cette session. "
+			   "Vérifiez le contenu avant de le joindre à un rapport de bug public."),
+			content);
+	dialog.exec();
+}
+
 /**
 	@brief QETApp::fetchWindowStats
 	Updates the booleans concerning the state of the windows

sources/qetapp.h

@@ -271,6 +271,7 @@ class QETApp : public QObject
 		void openTitleBlockTemplateFiles(const QStringList &);
 		void configureQET();
 		void aboutQET();
+		void showDiagnosticsReport();
 		void receiveMessage(int instanceId, QByteArray message);
 	
 	private:
@@ -287,6 +288,7 @@ class QETApp : public QObject
 		void initSystemTray();
 		void buildSystemTrayMenu();
 		void checkBackupFiles();
+		void checkCrashDump();
 		void fetchWindowStats(
 			const QList<QETDiagramEditor *> &,
 			const QList<QETElementEditor *> &,

sources/qetdiagrameditor.cpp

@@ -183,6 +183,7 @@ void QETDiagramEditor::setUpElementsPanel()
 	connect(pa, &ElementsPanelWidget::requestForProjectClosing, this, qOverload<QETProject*>(&QETDiagramEditor::closeProject));
 	connect(pa, SIGNAL(requestForProjectPropertiesEdition (QETProject *)), this, SLOT(editProjectProperties(QETProject *)));
 	connect(pa, &ElementsPanelWidget::requestForNewDiagram, this, &QETDiagramEditor::addDiagramToProject);
+	connect(pa, &ElementsPanelWidget::requestForNewDiagram, this, &QETDiagramEditor::addDiagramToProjectAt);
 	connect(pa, SIGNAL(requestForDiagramPropertiesEdition (Diagram *)), this, SLOT(editDiagramProperties(Diagram *)));
 	connect(pa, &ElementsPanelWidget::requestForDiagramsDeletion, this, &QETDiagramEditor::removeDiagrams);
 	connect(pa, &ElementsPanelWidget::requestForDiagramMoveUp, this, &QETDiagramEditor::moveDiagramUp);
@@ -367,6 +368,21 @@ void QETDiagramEditor::setUpActions()
 			pv->project()->setAutoConductor(ac);
 	});
 
+		//AutoBreakConductor
+	m_auto_break_conductor = new QAction   (QET::Icons::Conductor, tr("Coupure automatique de conducteur(s)","Tool tip of auto break conductor"), this);
+	m_auto_break_conductor->setStatusTip (tr("Couper automatiquement les conducteurs existants lors du placement d'un élément", "Status tip of auto break conductor"));
+	m_auto_break_conductor->setCheckable (true);
+	{
+		QSettings settings;
+		m_auto_break_conductor->setChecked(settings.value("diagrameditor/auto_break_conductor", false).toBool());
+	}
+	connect(m_auto_break_conductor, &QAction::triggered, [this](bool abc) {
+		QSettings settings;
+		settings.setValue("diagrameditor/auto_break_conductor", abc);
+		if (ProjectView *pv = currentProjectView())
+			pv->project()->setAutoBreakConductor(abc);
+	});
+
 		//Switch background color
 	m_grey_background = new QAction   (QET::Icons::DiagramBg, tr("Couleur de fond blanc/gris","Tool tip of white/grey background button"), this);
 	m_grey_background -> setStatusTip (tr("Affiche la couleur de fond du folio en blanc ou en gris", "Status tip of white/grey background button"));
@@ -806,6 +822,7 @@ void QETDiagramEditor::setUpToolBar()
 	diagram_tool_bar -> addAction (m_edit_diagram_properties);
 	diagram_tool_bar -> addAction (m_conductor_reset);
 	diagram_tool_bar -> addAction (m_auto_conductor);
+	diagram_tool_bar -> addAction (m_auto_break_conductor);
 
 	m_add_item_tool_bar = new QToolBar(tr("Ajouter"), this);
 	m_add_item_tool_bar->setObjectName("adding");
@@ -878,6 +895,8 @@ void QETDiagramEditor::setUpMenu()
 
 	// menu Projet
 	menu_project -> addAction(m_project_edit_properties);
+	menu_project -> addAction(m_auto_conductor);
+	menu_project -> addSeparator();
 	menu_project -> addAction(m_project_add_diagram);
 	menu_project -> addAction(m_remove_diagram_from_project);
 	menu_project -> addAction(m_clean_project);
@@ -913,6 +932,7 @@ void QETDiagramEditor::setUpMenu()
 	menu_affichage -> addAction(m_mode_visualise);
 	menu_affichage -> addSeparator();
 	menu_affichage -> addAction(m_draw_grid);
+	menu_affichage -> addAction(m_draw_guides);
 	menu_affichage -> addAction(m_grey_background);
 	menu_affichage -> addSeparator();
 	menu_affichage -> addActions(m_zoom_actions_group.actions());
@@ -1280,6 +1300,12 @@ bool QETDiagramEditor::addProject(QETProject *project, bool update_panel)
 
 	undo_group.addStack(project -> undoStack());
 
+	connect(project, &QETProject::projectModified, this, [this](QETProject *modified_project, bool) {
+		if (modified_project == currentProject()) {
+			updateWindowModifiedState();
+		}
+	});
+
 	m_element_collection_widget->addProject(project);
 
 	// met a jour le panel d'elements
@@ -1889,9 +1915,14 @@ void QETDiagramEditor::slot_updateModeActions()
 	{
 		m_auto_conductor -> setEnabled (true);
 		m_auto_conductor -> setChecked (pv -> project() -> autoConductor());
+		m_auto_break_conductor -> setEnabled (true);
+		m_auto_break_conductor -> setChecked (pv -> project() -> autoBreakConductor());
 	}
 	else
+	{
 		m_auto_conductor -> setDisabled(true);
+		m_auto_break_conductor -> setDisabled(true);
+	}
 }
 
 /**
@@ -2267,6 +2298,25 @@ void QETDiagramEditor::addDiagramToProject(QETProject *project)
 		project_view->project()->addNewDiagram();
 	}
 }
+
+/**
+	@brief QETDiagramEditor::addDiagramToProjectAt
+	Add a diagram to project, inserted at a specific position.
+	@param project
+	@param pos
+*/
+void QETDiagramEditor::addDiagramToProjectAt(QETProject *project, int pos)
+{
+	if (!project) {
+		return;
+	}
+
+	if (ProjectView *project_view = findProject(project))
+	{
+		activateProject(project);
+		project_view->project()->addNewDiagram(pos);
+	}
+}
 /**
  * @brief QETDiagramEditor::removeDiagram
  * Wrapper für einzelne Diagramme, um Abwärtskompatibilität zu erhalten.
@@ -2543,6 +2593,7 @@ void QETDiagramEditor::subWindowActivated(QMdiSubWindow *subWindows)
 	slot_updateWindowsMenu();
 	emit syncElementsPanel();
 	updateUsageTrackersActiveState();
+	updateWindowModifiedState();
 }
 
 /**
@@ -2568,6 +2619,32 @@ void QETDiagramEditor::updateUsageTrackersActiveState()
 	}
 }
 
+/**
+	@brief QETDiagramEditor::updateWindowModifiedState
+	Reflect the currently active project's unsaved-changes state in the
+	main window's title and native "document modified" indicator (e.g.
+	the dot in the close button on macOS). Called whenever the active
+	project changes, or whenever the active project's own modified state
+	changes.
+
+	The window title's "[*]" placeholder is Qt's own convention: combined
+	with setWindowModified(), it lets each platform render the modified
+	indicator its own way (or not at all, on platforms without one)
+	without QET having to draw anything itself.
+*/
+void QETDiagramEditor::updateWindowModifiedState()
+{
+	if (QETProject *project = currentProject()) {
+		setWindowTitle(QString("%1[*] - %2").arg(
+			project->pathNameTitle(),
+			tr("QElectroTech", "window title")));
+		setWindowModified(project->projectOptionsWereModified());
+	} else {
+		setWindowTitle(tr("QElectroTech", "window title"));
+		setWindowModified(false);
+	}
+}
+
 /**
 	@brief QETDiagramEditor::selectionChanged
 	This slot is called when a diagram selection was changed.

sources/qetdiagrameditor.h

@@ -98,6 +98,7 @@ class QETDiagramEditor : public QETMainWindow
 		ProjectView *findProject(const QString &) const;
 		QMdiSubWindow *subWindowForWidget(QWidget *) const;
 		void updateUsageTrackersActiveState();
+		void updateWindowModifiedState();
 
 	signals:
 		void syncElementsPanel();
@@ -137,6 +138,7 @@ class QETDiagramEditor : public QETMainWindow
 		void editDiagramProperties(DiagramView *);
 		void editDiagramProperties(Diagram *);
 		void addDiagramToProject(QETProject *);
+		void addDiagramToProjectAt(QETProject *, int);
 		void removeDiagram(Diagram *);
 		void removeDiagrams(const QList<Diagram *> &diagrams);
 		void removeDiagramFromProject();
@@ -191,7 +193,7 @@ class QETDiagramEditor : public QETMainWindow
 		*redo,				///< Redo the latest cancelled operation
 		*m_paste,			///< Paste clipboard content on the current diagram
 		*m_auto_conductor,		///< Enable/Disable the use of auto conductor
-		*conductor_default,		///< Show a dialog to edit default conductor properties
+		*m_auto_break_conductor,	///< Enable/Disable the use of auto break conductor
 		*m_grey_background,		///< Switch the background color in white or grey
 		*m_draw_grid,			///< Switch the background grid display or not
 		*m_draw_guides = nullptr,	///< Switch the custom guides display or not
@@ -199,7 +201,6 @@ class QETDiagramEditor : public QETMainWindow
 		*m_project_add_diagram,		///< Add a diagram to the current project.
 		*m_remove_diagram_from_project,	///< Delete a diagram from the current project
 		*m_clean_project,		///< Clean the content of the current project by removing useless items
-		*m_project_folio_list,		///< Sommaire des schemas
 		*m_csv_export,			///< generate nomenclature
 		*m_add_nomenclature,		///< Add nomenclature graphics item;
 		*m_add_summary,			///<Add summary graphics item

sources/qetgraphicsitem/element.cpp

@@ -16,6 +16,7 @@
 	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "element.h"
+#include "../qetapp.h"
 #include "../qetproject.h"
 #include "../PropertiesEditor/propertieseditordialog.h"
 #include "../autoNum/assignvariables.h"
@@ -33,6 +34,7 @@
 #include "../qetgraphicsitem/terminal.h"
 #include "../ui/elementpropertieswidget.h"
 #include "../undocommand/changeelementinformationcommand.h"
+#include "../undocommand/setautonumcontextcommand.h"
 #include "dynamicelementtextitem.h"
 #include "elementtextitemgroup.h"
 #include "iostream"
@@ -860,6 +862,15 @@ bool Element::fromXml(QDomElement &e,
 		}
 	}
 
+		//Load PLC master data override from diagram XML
+	if (m_data.m_type == ElementData::Master &&
+		m_data.m_master_type == ElementData::PLC)
+	{
+		auto xml_plc = e.firstChildElement(QStringLiteral("plcMasterData"));
+		if (!xml_plc.isNull())
+			m_data.plcMasterDataFromXml(xml_plc);
+	}
+
 	//We must block the update of the alignment when loading the information
 	//otherwise the pos of the text will not be the same as it was at save time.
 	for(DynamicElementTextItem *deti : m_dynamic_text_list)
@@ -993,6 +1004,15 @@ QDomElement Element::toXml(
 		element.appendChild(properties);
 	}
 
+		//Save PLC master data override for elements on diagram
+	if (m_data.m_type == ElementData::Master &&
+		m_data.m_master_type == ElementData::PLC)
+	{
+		auto xml_plc = m_data.plcMasterDataToXml(document);
+		if (!xml_plc.isNull())
+			element.appendChild(xml_plc);
+	}
+
 	//Dynamic texts
 	QDomElement dyn_text = document.createElement(QStringLiteral("dynamic_texts"));
 	for (DynamicElementTextItem *deti : m_dynamic_text_list)
@@ -1626,7 +1646,7 @@ void Element::hoverLeaveEvent(QGraphicsSceneHoverEvent *e)
 	(ex K for coil) with condition :
 	formula is empty, text tagged "label" is emptty or "_";
 */
-void Element::setUpFormula(bool code_letter)
+void Element::setUpFormula(bool code_letter, QUndoCommand *parent_undo)
 {
 	Q_UNUSED(code_letter)
 
@@ -1655,8 +1675,21 @@ void Element::setUpFormula(bool code_letter)
 					   nc,
 					   diagram(),
 					   element_currentAutoNum);
-		diagram()->project()->addElementAutoNum(element_currentAutoNum,
-							ncc.next());
+
+		NumerotationContext new_context = ncc.next();
+		QETProject *project = diagram()->project();
+		auto setter = [project](const QString &k, const NumerotationContext &c) {project->addElementAutoNum(k, c);};
+
+		if (parent_undo)
+		{
+			new SetAutoNumContextCommand(setter, element_currentAutoNum, nc, new_context, parent_undo);
+		}
+		else
+		{
+			auto *undo = new SetAutoNumContextCommand(setter, element_currentAutoNum, nc, new_context);
+			undo->setText(tr("Numéroter automatiquement un élément", "undo caption"));
+			diagram()->undoStack().push(undo);
+		}
 
 		if(!m_freeze_label && !formula.isEmpty())
 		{
@@ -1876,12 +1909,12 @@ void Element::drawPlcTable(QPainter *painter)
 	// Fonts
 	QFont header_font = plc_data.headerFont;
 	if (header_font.family().isEmpty()) {
-		header_font = painter->font();
+		header_font = QETApp::diagramTextsFont();
 		header_font.setBold(true);
 	}
 	QFont cell_font = plc_data.cellFont;
 	if (cell_font.family().isEmpty()) {
-		cell_font = painter->font();
+		cell_font = QETApp::diagramTextsFont();
 	}
 
 	for (const QPointF &pos : positions) {

sources/qetgraphicsitem/element.h

@@ -35,6 +35,7 @@ class Terminal;
 class Conductor;
 class DynamicElementTextItem;
 class ElementTextItemGroup;
+class QUndoCommand;
 
 /**
 	This is the base class for electrical elements.
@@ -142,7 +143,7 @@ class Element : public QetGraphicsItem
 		{return m_autoNum_seq;}
 		autonum::sequentialNumbers& rSequenceStruct()
 		{return m_autoNum_seq;}
-		void setUpFormula(bool code_letter = true);
+		void setUpFormula(bool code_letter = true, QUndoCommand *parent_undo = nullptr);
 		void setPrefix(QString);
 		QString getPrefix() const;
 		void freezeLabel(bool freeze);

sources/qetgraphicsitem/independenttextitem.cpp

@@ -19,6 +19,7 @@
 
 #include "../diagram.h"
 #include "../diagramcommands.h"
+#include "../lastusedstyle.h"
 #include "../qet.h"
 #include "../qetapp.h"
 #include "../utils/qetutils.h"
@@ -33,7 +34,10 @@
 IndependentTextItem::IndependentTextItem() :
 	DiagramTextItem(nullptr)
 {
-	setFont(QETApp::indiTextsItemFont());
+		//Start from the font last applied to a text item this session,
+		//falling back to the app-wide Preferences default otherwise.
+	setFont(LastUsedStyle::hasTextFont() ? LastUsedStyle::textFont()
+					      : QETApp::indiTextsItemFont());
 	QSettings settings;
 	setRotation(settings.value("diagrameditor/independent_text_rotation", 0).toInt());
 }

sources/qetgraphicsitem/terminal.cpp

@@ -199,6 +199,7 @@ void Terminal::paint(
 
 	// dessin de la borne en rouge
 	// draw the terminal in red
+	if (!diagram() || diagram()->drawTerminals()) {
 		t.setColor(Qt::red);
 		painter -> setPen(t);
 		painter -> drawLine(c, e);
@@ -212,6 +213,7 @@ void Terminal::paint(
 			painter -> setRenderHint(QPainter::Antialiasing, true);
 			painter -> drawEllipse(QRectF(c.x() - 2.5, c.y() - 2.5, 5.0, 5.0));
 		} else painter -> drawPoint(c);
+	}
 
 	//Draw help line if needed,
 	if (diagram() && m_draw_help_line)
@@ -273,9 +275,10 @@ void Terminal::paint(
 		m_help_line_a -> setLine(line);
 	}
 
-	// Draw label if show_name is enabled
+	// Draw label if show_name is enabled and terminal names are allowed
 	const QString display_name = name();
-	if (d->m_show_name && !display_name.isEmpty()) {
+	if (d->m_show_name && !display_name.isEmpty()
+		&& (!diagram() || diagram()->drawTerminalNames())) {
 		painter->setRenderHint(QPainter::Antialiasing, true);
 		painter->setRenderHint(QPainter::TextAntialiasing, true);
 		painter->setFont(d->m_label_font);

sources/qetmainwindow.cpp

@@ -136,6 +136,12 @@ void QETMainWindow::initCommonActions()
 	about_qt_ = new QAction(QET::Icons::QtLogo,  tr("À propos de &Qt"), this);
 	about_qt_ -> setStatusTip(tr("Affiche des informations sur la bibliothèque Qt", "status bar tip"));
 	connect(about_qt_, SIGNAL(triggered()), qApp, SLOT(aboutQt()));
+
+	diagnostics_action_ = new QAction(QET::Icons::DialogInformation, tr("Enregistrer un rapport de diagnostic..."), this);
+	diagnostics_action_ -> setStatusTip(tr("Génère un rapport avec les derniers messages de journalisation, pour l'inclure dans un rapport de bug", "status bar tip"));
+	connect(diagnostics_action_, &QAction::triggered, this, []() {
+		QETApp::instance()->showDiagnosticsReport();
+	});
 }
 
 /**
@@ -158,6 +164,8 @@ void QETMainWindow::initCommonMenus()
 	help_menu_ -> addAction(donate_);
 	help_menu_ -> addAction(about_qt_);
 	help_menu_ -> addAction(about_qet_);
+	help_menu_ -> addSeparator();
+	help_menu_ -> addAction(diagnostics_action_);
 
 #ifdef Q_OS_WIN32
 upgrade_ -> setVisible(true);

sources/qetmainwindow.h

@@ -62,6 +62,7 @@ class QETMainWindow : public QMainWindow {
 	QAction *upgrade_M;                      ///< Launch browser on QElectroTech MAC_OS_X builds
 	QAction *donate_;                        ///< Launch browser to donate link
 	QAction *about_qt_;                      ///< launch the "About Qt" dialog
+	QAction *diagnostics_action_;            ///< Open the diagnostics report dialog (discussion #644, step 5)
 	QMenu *settings_menu_;                   ///< Settings menu
 	QMenu *help_menu_;                       ///< Help menu
 	QMenu *display_toolbars_;                ///< Show/hide toolbars/docks

sources/qetproject.cpp

@@ -69,6 +69,10 @@ m_project_properties_handler{this}
 	init();
 
 	QSettings settings;
+
+		//Read auto break conductor default from global settings
+	m_auto_break_conductor = settings.value(QStringLiteral("diagrameditor/auto_break_conductor"), false).toBool();
+
 	int size = settings.beginReadArray(QStringLiteral("diagrameditor/defaultguides"));
 	for (int i = 0; i < size; ++i) {
 		settings.setArrayIndex(i);
@@ -927,6 +931,28 @@ void QETProject::setAutoConductor(bool ac)
 		m_auto_conductor = ac;
 }
 
+/**
+	@brief QETProject::autoBreakConductor
+	@return true if use of auto break conductor is authorized.
+	See also Q_PROPERTY autoBreakConductor
+*/
+bool QETProject::autoBreakConductor() const
+{
+	return m_auto_break_conductor;
+}
+
+/**
+	@brief QETProject::setAutoBreakConductor
+	@param abc
+	Enable the use of auto break conductor if true
+	See also Q_PROPERTY autoBreakConductor
+*/
+void QETProject::setAutoBreakConductor(bool abc)
+{
+	if (abc != m_auto_break_conductor)
+		m_auto_break_conductor = abc;
+}
+
 /**
 	@brief QETProject::autoFolioNumberingNewFolios
 	emit Signal to add new Diagram with autonum
@@ -1735,6 +1761,7 @@ void QETProject::readDefaultPropertiesXml(QDomDocument &xml_project)
 	{
 		m_current_conductor_autonum = conds_autonums.attribute(QStringLiteral("current_autonum"));
 		m_freeze_new_conductors = conds_autonums.attribute(QStringLiteral("freeze_new_conductors")) == QLatin1String("true");
+		m_auto_break_conductor = conds_autonums.attribute(QStringLiteral("auto_break_conductors")) == QLatin1String("true");
 		for (auto elmt : QET::findInDomElement(conds_autonums, QStringLiteral("conductor_autonum")))
 		{
 			NumerotationContext nc;
@@ -1861,6 +1888,7 @@ void QETProject::writeDefaultPropertiesXml(QDomElement &xml_element)
 	QDomElement conductor_autonums = xml_document.createElement("conductors_autonums");
 	conductor_autonums.setAttribute("current_autonum", m_current_conductor_autonum);
 	conductor_autonums.setAttribute("freeze_new_conductors", m_freeze_new_conductors ? "true" : "false");
+	conductor_autonums.setAttribute("auto_break_conductors", m_auto_break_conductor ? "true" : "false");
 	foreach (QString key, conductorAutoNum().keys()) {
 	QDomElement conductor_autonum = conductorAutoNum(key).toXml(xml_document, "conductor_autonum");
 		if (key != "" && conductorAutoNumFormula(key) != "") {

sources/qetproject.h

@@ -90,6 +90,7 @@ class QETProject : public QObject
 		};
 
 		Q_PROPERTY(bool autoConductor READ autoConductor WRITE setAutoConductor)
+	Q_PROPERTY(bool autoBreakConductor READ autoBreakConductor WRITE setAutoBreakConductor)
 
 		// constructors, destructor
 	public:
@@ -181,9 +182,11 @@ class QETProject : public QObject
 		void setFreezeNewConductors(bool);
 
 		bool autoConductor () const;
+		bool autoBreakConductor () const;
 		bool autoElement () const;
 		bool autoFolio () const;
 		void setAutoConductor (bool ac);
+		void setAutoBreakConductor (bool abc);
 		void setAutoElement (bool ae);
 		void autoFolioNumberingNewFolios ();
 		void autoFolioNumberingSelectedFolios(int, int, const QString&);
@@ -318,6 +321,7 @@ class QETProject : public QObject
 		QHash <QString, NumerotationContext> m_element_autonum; //Title and NumContext hash
 		QString m_current_element_autonum;
 		bool m_auto_conductor = true;
+	bool m_auto_break_conductor = false;
 		XmlElementCollection *m_elements_collection = nullptr;
 		bool m_freeze_new_elements = false;
 		bool m_freeze_new_conductors = false;

sources/richtext/ui_addlinkdialog.h

@@ -1,117 +0,0 @@
-/********************************************************************************
-** Form generated from reading UI file 'addlinkdialog.ui'
-**
-** Created: Thu 4. Apr 17:13:59 2013
-**      by: Qt User Interface Compiler version 4.8.4
-**
-** WARNING! All changes made in this file will be lost when recompiling UI file!
-********************************************************************************/
-
-#ifndef UI_ADDLINKDIALOG_H
-#define UI_ADDLINKDIALOG_H
-
-#include <QtCore/QVariant>
-#include <QAction>
-#include <QApplication>
-#include <QButtonGroup>
-#include <QDialog>
-#include <QDialogButtonBox>
-#include <QFormLayout>
-#include <QFrame>
-#include <QHeaderView>
-#include <QLabel>
-#include <QLineEdit>
-#include <QSpacerItem>
-#include <QVBoxLayout>
-
-QT_BEGIN_NAMESPACE
-
-class Ui_AddLinkDialog
-{
-public:
-	QVBoxLayout *verticalLayout;
-	QFormLayout *formLayout;
-	QLabel *label;
-	QLineEdit *titleInput;
-	QLabel *label_2;
-	QLineEdit *urlInput;
-	QSpacerItem *verticalSpacer;
-	QFrame *line;
-	QDialogButtonBox *buttonBox;
-	
-	void setupUi(QDialog *AddLinkDialog)
-	{
-		if (AddLinkDialog->objectName().isEmpty())
-			AddLinkDialog->setObjectName(QString::fromUtf8("AddLinkDialog"));
-		AddLinkDialog->setSizeGripEnabled(false);
-		AddLinkDialog->setModal(true);
-		verticalLayout = new QVBoxLayout(AddLinkDialog);
-		verticalLayout->setObjectName(QString::fromUtf8("verticalLayout"));
-		formLayout = new QFormLayout();
-		formLayout->setObjectName(QString::fromUtf8("formLayout"));
-		label = new QLabel(AddLinkDialog);
-		label->setObjectName(QString::fromUtf8("label"));
-		
-		formLayout->setWidget(0, QFormLayout::LabelRole, label);
-		
-		titleInput = new QLineEdit(AddLinkDialog);
-		titleInput->setObjectName(QString::fromUtf8("titleInput"));
-		titleInput->setMinimumSize(QSize(337, 0));
-		
-		formLayout->setWidget(0, QFormLayout::FieldRole, titleInput);
-		
-		label_2 = new QLabel(AddLinkDialog);
-		label_2->setObjectName(QString::fromUtf8("label_2"));
-		
-		formLayout->setWidget(1, QFormLayout::LabelRole, label_2);
-		
-		urlInput = new QLineEdit(AddLinkDialog);
-		urlInput->setObjectName(QString::fromUtf8("urlInput"));
-		
-		formLayout->setWidget(1, QFormLayout::FieldRole, urlInput);
-		
-		
-		verticalLayout->addLayout(formLayout);
-		
-		verticalSpacer = new QSpacerItem(0, 0, QSizePolicy::Minimum, QSizePolicy::Expanding);
-		
-		verticalLayout->addItem(verticalSpacer);
-		
-		line = new QFrame(AddLinkDialog);
-		line->setObjectName(QString::fromUtf8("line"));
-		line->setFrameShape(QFrame::HLine);
-		line->setFrameShadow(QFrame::Sunken);
-		
-		verticalLayout->addWidget(line);
-		
-		buttonBox = new QDialogButtonBox(AddLinkDialog);
-		buttonBox->setObjectName(QString::fromUtf8("buttonBox"));
-		buttonBox->setOrientation(Qt::Horizontal);
-		buttonBox->setStandardButtons(QDialogButtonBox::Cancel|QDialogButtonBox::Ok);
-		
-		verticalLayout->addWidget(buttonBox);
-		
-		
-		retranslateUi(AddLinkDialog);
-		QObject::connect(buttonBox, SIGNAL(accepted()), AddLinkDialog, SLOT(accept()));
-		QObject::connect(buttonBox, SIGNAL(rejected()), AddLinkDialog, SLOT(reject()));
-		
-		QMetaObject::connectSlotsByName(AddLinkDialog);
-	} // setupUi
-	
-	void retranslateUi(QDialog *AddLinkDialog)
-	{
-		AddLinkDialog->setWindowTitle(QApplication::translate("AddLinkDialog", "Insert Link", nullptr));
-		label->setText(QApplication::translate("AddLinkDialog", "Title:", nullptr));
-		label_2->setText(QApplication::translate("AddLinkDialog", "URL:", nullptr));
-	} // retranslateUi
-	
-};
-
-namespace Ui {
-	class AddLinkDialog: public Ui_AddLinkDialog {};
-} // namespace Ui
-
-QT_END_NAMESPACE
-
-#endif // UI_ADDLINKDIALOG_H

sources/ui/configpage/configpages.cpp

@@ -214,7 +214,11 @@ void NewDiagramPage::applyConf()
 		rpw->toSettings(settings, "diagrameditor/defaultreport");
 
 		// default xref properties
-		QHash <QString, XRefProperties> hash_xrp = xrefpw -> properties();
+		const QHash<QString, XRefProperties> hash_xrp = xrefpw->properties();
+		for (auto it = hash_xrp.constBegin() ; it != hash_xrp.constEnd() ; ++it) {
+			it.value().toSettings(settings,
+						  QStringLiteral("diagrameditor/defaultxref") % it.key());
+		}
 
 		// Global in QSettings speichern
 		QList<Diagram::Guide> current_guides = m_gpw->guides();

sources/ui/customelementinfopartwidget.cpp

@@ -0,0 +1,113 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "customelementinfopartwidget.h"
+
+#include "../diagramcontext.h"
+#include "../qeticons.h"
+
+#include <QGridLayout>
+#include <QLineEdit>
+#include <QToolButton>
+
+/**
+	@brief CustomElementInfoPartWidget::CustomElementInfoPartWidget
+	Constructor
+	@param key initial key name (empty for a freshly added row)
+	@param value initial value
+	@param parent parent widget
+*/
+CustomElementInfoPartWidget::CustomElementInfoPartWidget(
+		const QString &key,
+		const QString &value,
+		QWidget *parent) :
+	QWidget(parent),
+	m_key_edit(new QLineEdit(key, this)),
+	m_value_edit(new QLineEdit(value, this)),
+	m_remove_button(new QToolButton(this))
+{
+	m_key_edit->setPlaceholderText(tr("nom_de_la_propriete"));
+	m_key_edit->setToolTip(tr("Lettres minuscules, chiffres, tiret et underscore uniquement"));
+	m_value_edit->setClearButtonEnabled(true);
+
+	m_remove_button->setIcon(QET::Icons::Remove);
+	m_remove_button->setToolTip(tr("Supprimer cette propriété"));
+	m_remove_button->setAutoRaise(true);
+
+	auto *layout = new QGridLayout(this);
+	layout->setContentsMargins(0, 2, 0, 2);
+	layout->setVerticalSpacing(2);
+	layout->setHorizontalSpacing(0);
+	layout->addWidget(m_key_edit,   0, 0);
+	layout->addWidget(m_value_edit, 1, 0);
+	layout->addWidget(m_remove_button, 0, 1, 2, 1);
+
+	connect(m_key_edit, &QLineEdit::textChanged, this, &CustomElementInfoPartWidget::validateKey);
+	connect(m_key_edit, &QLineEdit::textChanged, this, &CustomElementInfoPartWidget::changed);
+	connect(m_value_edit, &QLineEdit::textChanged, this, &CustomElementInfoPartWidget::changed);
+	connect(m_remove_button, &QToolButton::clicked, this, [this]() {
+		emit removeRequested(this);
+	});
+
+	setFocusProxy(m_key_edit);
+	validateKey();
+}
+
+CustomElementInfoPartWidget::~CustomElementInfoPartWidget()
+{
+}
+
+/**
+	@return the key name currently typed in this row
+*/
+QString CustomElementInfoPartWidget::key() const
+{
+	return m_key_edit->text().trimmed();
+}
+
+/**
+	@return the value currently typed in this row
+*/
+QString CustomElementInfoPartWidget::value() const
+{
+	return m_value_edit->text();
+}
+
+/**
+	@return true if the typed key is non-empty and matches
+	DiagramContext::isKeyAcceptable()
+*/
+bool CustomElementInfoPartWidget::hasValidKey() const
+{
+	const QString k = key();
+	return !k.isEmpty() && DiagramContext::isKeyAcceptable(k);
+}
+
+/**
+	@brief CustomElementInfoPartWidget::validateKey
+	Flag the key field when it doesn't match the accepted format,
+	instead of silently dropping it later.
+*/
+void CustomElementInfoPartWidget::validateKey()
+{
+	const QString k = key();
+	if (k.isEmpty() || DiagramContext::isKeyAcceptable(k)) {
+		m_key_edit->setStyleSheet(QString());
+	} else {
+		m_key_edit->setStyleSheet(QStringLiteral("border: 1px solid red;"));
+	}
+}

sources/ui/customelementinfopartwidget.h

@@ -0,0 +1,61 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef CUSTOMELEMENTINFOPARTWIDGET_H
+#define CUSTOMELEMENTINFOPARTWIDGET_H
+
+#include <QWidget>
+
+class QLineEdit;
+class QToolButton;
+
+/**
+	@brief The CustomElementInfoPartWidget class
+	A single row letting the user define their own element information
+	key/value pair, unlike ElementInfoPartWidget which is bound to one
+	predefined key. The key is validated against
+	DiagramContext::isKeyAcceptable() as the user types.
+*/
+class CustomElementInfoPartWidget : public QWidget
+{
+		Q_OBJECT
+
+	public:
+		explicit CustomElementInfoPartWidget(
+				const QString &key = QString(),
+				const QString &value = QString(),
+				QWidget *parent = nullptr);
+		~CustomElementInfoPartWidget() override;
+
+		QString key() const;
+		QString value() const;
+		bool hasValidKey() const;
+
+	signals:
+		void changed();
+		void removeRequested(CustomElementInfoPartWidget *self);
+
+	private slots:
+		void validateKey();
+
+	private:
+		QLineEdit   *m_key_edit;
+		QLineEdit   *m_value_edit;
+		QToolButton *m_remove_button;
+};
+
+#endif // CUSTOMELEMENTINFOPARTWIDGET_H