Keep the wire numbers out of the terminal drawing

The number of a wire was written from its mark towards the terminal
without any regard for the room left: a colour code like 'gnge' ran
into the drawing of the terminal. The length of the wires setting
moves the mark, but every project has to be tuned to its longest
number by hand, and a short length leaves no room at all.

Shrink the font while the number is longer than the room between the
mark and the terminal, and clip away what still does not fit even at
the smallest size, so a number never crosses into the terminal -- the
wire length and the font stay the settings to make the drawing
pleasant, they are just no longer able to break it.

tst_cabletarget paints the strip with a long number and without any
and checks the two pictures are the same above the bottom of the
terminal: the number is drawn below it or not at all.

tests/qttest/tst_cabletarget.cpp

@@ -43,6 +43,10 @@
 	The graphic draws them in a small box under the cable, the bundle
 	staying together (RealTerminal::cableTarget()).
 
+	Also here: the number of a wire must stay in the room left between
+	its mark and the terminal -- it shrinks, and what does not fit is
+	clipped, so it never runs into the drawing of the terminal.
+
 	fixtures/every_feature.qet has the strip X1 (elements 891b70f2 and
 	4861e268) and the contact fc9cc920 wired to 891b70f2 by the
 	conductor 8bd16d7a; the test gives the contact the Installation,
@@ -159,6 +163,7 @@ private slots:
 	void ownStripIsNoTarget();
 	void spareHasNoTarget();
 	void paintsWithTargetBox();
+	void wireLabelStaysOutOfTheTerminal();
 };
 
 void tst_cabletarget::init()
@@ -298,6 +303,74 @@ void tst_cabletarget::paintsWithTargetBox()
 	QVERIFY(with_box != without_box);
 }
 
+/**
+	The number of a wire is written next to its mark, in the room left
+	between the mark and the terminal: it shrinks to fit there, and what
+	still does not fit is clipped away, so a long number never runs into
+	the drawing of the terminal. The two pictures -- one with a number
+	long enough to reach into the terminal, one without any -- must be
+	the same above the bottom of the terminal, and differ below it (the
+	number is drawn somewhere).
+*/
+void tst_cabletarget::wireLabelStaysOutOfTheTerminal()
+{
+	QVERIFY(wireCableToTheContact());
+
+	auto pattern_ = QSharedPointer<TerminalStripLayoutPattern>{new TerminalStripLayoutPattern};
+	const auto strips_ = m_project->terminalStrip();
+	QVERIFY(!strips_.isEmpty());
+	TerminalStripDrawer::TerminalStripDrawer drawer{
+		QSharedPointer<TerminalStripDrawer::TrueTerminalStrip>{
+			new TerminalStripDrawer::TrueTerminalStrip{strips_.first()}},
+		pattern_};
+
+	const QRectF bounds{drawer.boundingRect()};
+	QVERIFY(!bounds.isEmpty());
+
+	const auto render = [&drawer, &bounds]() {
+		QImage image{bounds.size().toSize() + QSize{4, 4},
+					 QImage::Format_ARGB32_Premultiplied};
+		image.fill(Qt::transparent);
+		QPainter painter{&image};
+		painter.translate(-bounds.topLeft() + QPointF{2, 2});
+		drawer.paint(&painter);
+		return image;
+	};
+
+		//A number much longer than the room left over the mark
+	Element *terminal_ = element(
+		QStringLiteral("{891b70f2-2822-41c3-9f94-28efb448b5c4}"));
+	QVERIFY(terminal_);
+	ElementData terminal_data_{terminal_->elementData()};
+	terminal_data_.m_informations.addValue(
+		RealTerminal::cableWireInfoKey(),
+		QStringLiteral("gnge-gnge-gnge-gnge-gnge"));
+	terminal_->setElementData(terminal_data_);
+	const QImage with_label{render()};
+
+		//The same strip, the wire carries no number at all
+	terminal_data_.m_informations.addValue(RealTerminal::cableWireInfoKey(),
+										   QString());
+	terminal_->setElementData(terminal_data_);
+	const QImage without_label{render()};
+
+		//The number is drawn: the two pictures differ
+	QVERIFY(with_label != without_label);
+
+		//The terminals of this strip all stand on the last level of the
+		//pattern, so their bottom is the same rectangle
+	const qreal terminal_bottom{pattern_->m_terminal_rect.at(3).bottom()};
+	const auto rows_to_check{qMin(qRound(terminal_bottom - bounds.topLeft().y() + 2),
+								  with_label.height())};
+	for (auto y = 0 ; y < rows_to_check ; ++y)
+	{
+		for (auto x = 0 ; x < with_label.width() ; ++x)
+		{
+			QCOMPARE(with_label.pixel(x, y), without_label.pixel(x, y));
+		}
+	}
+}
+
 int main(int argc, char **argv)
 {
 	QStandardPaths::setTestModeEnabled(true);