English has been the source language of the program for a while now
(upstream: "Make English the source language ..."), the cable feature
came in with French ones: about 200 translatable strings over 30 files,
the two settings pages built from .ui files, four comments and one test
which asserted the old wording (blocking review comment by ispyisail).
The wording follows what the code base already uses where it exists:
Plant (=) and Location (+) as qetinformation.cpp names those element
information, Designation for the field the cable form calls its BMK,
Length, Sheet for folio, Automatic numbering, Cross-reference, and Right
aligned / Centred / Left aligned the way cabletextformatdialog.cpp
already spells the three alignment entries.
Two things are more than a word-for-word swap:
- xrefpropertieswidget.cpp:291 wrote the label of the master field on
every type change with a hardcoded tr("Maitre"), so the English
"Master" coming from the .ui was overwritten for every type, cable or
not: a real bug next to being French. The wording now comes back from
the .ui and only a cable renames the field to "Text:", so the two
cannot drift apart again.
- tst_cabletypelist kept asserting that a new catalogue is *labelled*
in French. That label line is the translated header and reads English
now. The test still reads files with French headers on purpose:
headerAliasMap() keeps the five old French labels as aliases next to
the English ones, so catalogues written by earlier builds, including
the one the reviewer reads her own types from, keep loading.
The .ts files are deliberately not regenerated here. Upstream
regenerates them on master, as it did for the language change itself,
and a translation is keyed on the source string: while the sources were
French a German user saw French in the cable dialogs, and an English
source string with no translation yet shows as it is.
Build clean, ctest 92/93, the one failure being the pre-existing
headless tst_menubarkeyboard.
Upstream moved 56 commits ahead of the last merge. Six files conflicted,
all of them files where upstream's French -> English tr() translation wave
touched lines we had also touched with the cable feature. Resolution rule
applied everywhere: take upstream's English source strings, keep our cable
additions.
Resolved:
- sources/ui/xrefpropertieswidget.ui : kept our structure (m_labels_gb
pulled out of the display group, m_slave_row, the m_font_pb "Police..."
button of the cable cross-reference) and mechanically applied upstream's
20 English string replacements on top of it.
- sources/ui/xrefpropertieswidget.cpp : our version plus upstream's 7
translated combo entries; the tr("Cable") item we add for the cable
cross-reference type stays.
- sources/autoNum/ui/numparteditorw.cpp : upstream's English part names
("number format 1", "Sheet no.", "Plant", "Location", ...) for the
number-format list, with our comment explaining why type 3 (cable) takes
the conductor kinds of variable.
- sources/ui/configpage/configpages.cpp : upstream's English tab titles
(Conductors / Elements / Sheets) plus our Cables tab.
- sources/ui/configpage/projectconfigpages.cpp : upstream's "Sheets" tab
title plus our Cables tab block (single-rule SelectAutonumW(3)).
- sources/qetdiagrameditor.cpp : union of both sides - upstream's new
"Add a generic device" action (icon, status tip, data id) and its
English menu names ("File"/"Edit"/"Project"/"Display"), together with our
cable action, the Numbering and Lists menus, the cable list actions and
the CSV export in the Project menu.
Kept French: our own cable tr() source strings stay French for now. That
is the smaller change and the translation pass can follow separately.
Verified: full build 1065/1065, ctest 91/92 (only the pre-existing
headless tst_menubarkeyboard fails: no window manager, so Alt+F and F10
cannot open a menu bar), smoke start exit 124, no conflict marker left in
the tree.
Two defects found while re-testing the cable management after the
upstream merge, plus one change of intent for the numbering question.
The question "define a cable numbering rule now?" kept its answer in
the program settings, so saying no once silenced every project of the
program -- the exact opposite of what it should do. The answer now
travels with the project itself, stored on the <cable_autonums>
element as ask_numbering_rule="false"; a file which does not hold the
answer asks again, and taking the rule away in the project properties
or in the numbering window brings the question back for that project
alone. Read-only projects are no longer asked at all, since there is
nowhere in them to define a rule.
The numbering window could not hand out the first rule of a project:
it drew the rule, worked the numbers out with it, and only wrote the
rule into the project together with those numbers -- while the
planning refused to run on a project which had no rule saved yet.
The counters of a cable rule are kept under its fixed name anyway, so
planning now falls back to that name when the project holds no rule
yet: a rule which is being drawn in the window counts from the moment
it is complete, and the first renumbering of a project works.
Conflicts resolved in 24 files. Notable decisions:
- ico/icon-themes.qrc: upstream's icon folder restructure kept; the 36
cable icon entries re-added under the new qet/qet-dark path scheme
(XML valid, every referenced file exists).
- Toolbar system: upstream's DiagramToolbarSettings now owns the
toolbar filling. The cable tool is registered as
diagrameditor.add_cable (generic group loop) and listed on the
"diagram" toolbar right after the auto-break conductor action,
separated by a divider, exactly like before the merge.
- Paste: the cable lines of a copy are handed to
PasteNumberingImport::push() as extra commands, so paste + cable
lines + the numbering question stay ONE undo step on both paste
paths (DiagramView::paste and DiagramEventAddPaste::commit).
- PDF links: upstream's deterministic link sorting kept together with
the cable cross-reference injector (injectLinkTo -> links list).
- Element renumbering: upstream's ElementAutoNumSchemeCommand::renumber
replaces the old formula-based body of
QETProject::renumberElementsBySchemeTitle; the cable numbering rule
API (cableAutoNum, axis priority, rule name) is kept in full.
- Auto-numbering pages: upstream's scheme management kept, the Câbles
tab added as index 4 (changeToCableTab), both entry points
changeToCable() and changeToElement() kept side by side.
- SelectAutonumW: dirty tracking and the contextEdited signal moved
into upstream's insertPartRow() row API, so single-rule mode, the
rule-removable button and "confirm without change leaves the project
alone" keep working.
- xrefpropertieswidget: upstream's offset clamping kept; the cable
branch (Texte field, Police button, hidden display options) kept;
the stack-overlapping checkbox is hidden for cables.
Verified after the merge: build green (515/515, no errors), ctest
85/86 (only the pre-existing headless tst_menubarkeyboard failure),
offscreen smoke exit 124.
Cables are drawn line objects (toolbar button next to the auto
break/reconnect button, click-move-click, right click cancels), not
components. The type comes from a CSV catalog following the material
list pattern (designation, cores, core colours, editable through the
entry dialog with "Nouvelle entrée" / "Modifier l'entrée").
Each core is bound to the wire its colour label stands on, and the
cable reference is generated per core and written into the Conductor
entry via Conductor::setCableReference(label, cable uuid, slot). The
conductor entry is where it has to live because the terminal strip
plan (Klemmenplan) consumes it in the next step.
Numbering: "Cables" rule under Programmeinstellungen/Neues
Projekt/Nummerierung auto (mirrored in project properties), literal
"W" fallback without a rule, French gate dialog when no rule exists,
Nummerierung menu with the renumber dialog (preferred axis, per-folio
counter, rule and counter state written back, hand-typed names ask,
whole-project scope).
Also included: label block and under-line texts with per-text font and
alignment plus the material-list cell margins, free-core placement and
right-click removal, claim questions for wires of other cables,
multi-selection drag as one undo step, type change with confirmation,
cross-references for type "Cable" (%f-%l%c, own font, clickable links
in exported PDFs), report propagation of the cable definition,
Listes menu (table of contents, material list, terminal strip manager,
terminal generator plugin, cable list), cable list with freely
selectable columns (installation/localisation of cable, start and end,
Blatt start/end, length, used cores...), CSV export dialog with column
pick and preview in the Projekt menu, script API (addTable kind
"cable_list", exportCableList) and a unit test for the type catalog.
Every tr() source string in the code and the forms is now the English
text, and French is a translation (qet_fr.ts) like the other languages.
Generated, not hand-edited: master ef795a21e5 converted by
qet-en-source (harness 4c4ddc9).
3144 messages get an English source, 665 already had one, 0 left French; 8 shared-wording pairs disambiguated.
C++: 2904 literals in 233 files. Forms: 809 strings in 65 files. All 34 .ts files re-keyed; qet_fr.ts filled.
lupdate check: PASS. What each of 38 languages shows, old vs new: same 118266, English instead of French 38433, comment fallback 51, differences 0.
Brings in master's DXF blocks (#1339) through #1354. The upright texts
now live in drawSymbol() too, and a turned symbol whose texts stay
horizontal is drawn in full like a mirrored one: an INSERT would turn
its texts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On GTK desktops (Mint, XFCE, GNOME) Qt hands QColorDialog to GTK's
chooser. Its "Custom" row is a recent-colours list kept by GTK: every
colour picked is pushed in on the left and the oldest drops out, so a
user's saved wire colours are lost (forum topic 3190). It also ignores
the custom colours QET saves (#918) and has no swatch grid for the
double-click to accept (#1172).
Pass DontUseNativeDialog at every colour dialog, so all platforms get
the dialog Windows already shows: 16 custom slots that change only on
"Add to Custom Colors", saved across restarts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The right-drag ring showed the shortcut bar's commands for the selection.
A new Preferences page, "Gestes de la souris", lets the user pick the
ring's commands per selection context, one per direction, and choose 4 or
8 directions. Commands are dropped from the list onto a slot of a ring
editor, or placed with a button; Delete empties a slot.
A context the user never edits keeps following the shortcut bar, and 8
directions stays the default, so nothing changes for anyone who does not
open the page. A picked list is positional: a direction left empty, or
holding a command this build lacks, stays empty instead of shifting the
others. Stored like ShortcutBarSettings: diagrameditor/gestures/<context>
id lists in QSettings, defaults not stored.
tst_gesturesettings covers the defaults, positional lists, the 4/8
setting, the overlay's sectors and empty slots, and the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Configure QElectroTech > Toolbar contents: pick a toolbar, drag or add
commands from the list on the left, remove them with Delete, reorder,
add separators, and add, rename or delete toolbars of one's own.
Reset to defaults gives a toolbar its original contents back.
Each toolbar is stored as a list of command ids in QSettings
(diagrameditor/toolbars/<objectName>), the same pattern the shortcut
bar uses. A toolbar the user never changed stores nothing and is built
exactly as before; an id no command carries any more is skipped. The
four buttons that are widgets rather than commands (handle size, text
grid, background colour, conductor colour) get ids of their own and
can each be on one toolbar at a time. Stored scripts can go on any
toolbar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A "Format" choice in the folio dimensions box sets the columns and rows
so the whole folio, title block included, has the size of an ISO A
sheet at the 96 dpi the PDF export uses. A4 landscape keeps 60 px
columns and 80 px rows and comes out as an A4 page in the PDF.
Nothing new is stored: the choice only fills in the columns and rows.
A folio whose size already matches a paper shows that paper; any other
shows "Custom". Changing the title block template after picking a paper
fits the folio again; a template too tall for the paper falls back to
"Custom".
The same box is in Folio properties and in the new-folio defaults of
the project and application settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A project can now keep the texts drawn in its symbols, and the names of
their terminals, horizontal when a symbol is turned: Project properties >
General, "Garder horizontaux les textes des symboles pivotés". The box of
each text turns with the symbol; the text does not, and reads as it does
in the symbol itself.
It is a project setting, saved as <symbol_texts upright="true"/> and
only when on. A new project starts with it on; a project saved without
it (every existing one) reads with it off, so it looks and saves exactly
as before, and looks the same on every computer. The MCP server's new
projects start with it on too.
It builds on the mirror of #1354, which already redraws the texts of a
mirrored symbol readable: what the symbol does to its texts is now its
mirrors and, with the setting on, its turn (Element::symbolTextsTransform()).
ElementPictureFactory caches one drawing per such transform, terminal
names undo it the same way, and the DXF export places the texts alike.
The fields of a symbol (label, comment...) already keep their angle with
"Garder la rotation visuelle" and are left as they are.
Known limit: two texts stacked in a symbol end up side by side when it is
turned, and can overlap when kept horizontal; the setting can be turned
off for such a project.
Test: tst_uprightsymboltexts turns the symbols of a folio and checks the
angle of each motor's "M" in the DXF, with the setting off and on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new page in Configurer QElectroTech, "Barres d'outils", sets for
every window (folio editor, element editor, title block editor):
- the icon size: default, 16, 24, 32 or 48 px
- the buttons: icon only, text beside the icon, or text under it
- locking the toolbars so they can't be dragged out of place
OK applies it to the open windows at once. The defaults are Qt's
own, and a default value removes its key, so nothing changes for
anyone who never opens the page. A toolbar inside a panel is left
alone; only the window's own toolbars are locked.
New test tst_toolbarsettings: defaults change nothing, saved values
reach every toolbar of an open window, back to defaults removes the
keys.
Third stage of discussion #1319.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Shortcuts page now shows:
- each command's icon, and a Menu column saying where it is
("Projet › Scripts"); the text filter matches that too
- a category filter beside the existing Bound/Unbound/Conflicts one
- "Rechercher par touche": press a key combination and only the
commands using it are listed, however the key is spelled in the
user's language. A key also finds the two-key shortcuts it starts.
- "Copier la liste": the shown rows go on the clipboard as
tab-separated text with a header, so they paste into a spreadsheet
one cell per column
ShortcutManager::ShortcutInfo carries the icon and the first live
QAction so the page needs no second registry.
New test tst_shortcutspage covers the menu path, the columns, both
filters and the copied text.
Second stage of discussion #1319.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Schemas now get saved with a UUID and do not have to be looked up according to the form. They can be renamed and it gets reflected in existing elements. The GUI for
editing them is now much easier, e.g. forms can be reshuffled. A formula can be applied. Many options now also for conductors and sheets.
Review of #1272: scorpio810 asked for a warning box for users; the inline
box added in 9a55939bb is replaced by a pop-up, as the element editor
gives for unnamed terminals. When OK in Settings > General or in Project
properties turns a rule on (a limit where there was none, or one wire
per folio report), a warning says the rules are experimental, may change
with settings to redo if wires and conductors become separate objects,
and can all be turned off in Settings > General. OK goes on. Changing a
limit that was already on, or turning rules off, shows nothing.
tst_wiringrules: when the warning is due (WiringRules::turnsRuleOn()).
Checked in the GUI from both pages, and that a plain OK shows nothing.
English for translators: "Warning"; "The wires-per-terminal rules are an
experimental feature. They count wires as QElectroTech represents them
today. They could change, and your settings need redoing, if wires and
conductors become separate objects in a future version. All these rules
can be turned off in Configure QElectroTech > General."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015FPuYPS4T7QuEwjNu22rXD
Review of #1272 (scorpio810, after arummler's note that the rules would
need redesigning if wires and conductors become separate objects): a
warning box, with the standard warning icon, at the top of the rules in
Settings > General and in Project properties. It says the feature is
experimental, counts wires as QElectroTech models them today, and that
the rules, and the user's settings, could change if wires and conductors
are separated.
English for translators: "Experimental feature. These rules count wires
as QElectroTech represents them today; they could change, and your
settings need redoing, if wires and conductors become separate objects
in a future version."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015FPuYPS4T7QuEwjNu22rXD
The limits were per project only. They are now set once in Settings >
General, under the master switch: the most wires per terminal and "one
wire per folio report". Every project follows them.
Project properties > "Conducteurs par borne" gets "Utiliser les réglages
de l'application", ticked by default, showing the application's values
greyed. Unticked, the project keeps its own values, saved in the project
as before, so a drawing that needs its own limit carries it to any
computer. A project's own "no limit" overrides an application limit too.
QETProject::wiringRules() now returns the rules in force (the project's
own, or the application's), so the code that checks a wire is unchanged;
projectWiringRules() returns what the project itself stores. A project
that follows the application still writes nothing, so it saves exactly as
before.
tst_wiringrules: which rules win, the save round trip of a project's own
"no rule", and through the real binary that the application's limit
refuses a wire unless the project overrides it or the master switch is
off (checked to fail with the application's rules ignored). ctest 55/55.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015FPuYPS4T7QuEwjNu22rXD
Discussion #1158: a real terminal takes one or two wires (four with
double ferrules), a folio report is a virtual point that carries one, but
QElectroTech lets any number of wires be connected anywhere.
Project properties > General gets a "Conducteurs par borne" group:
- the most wires a terminal may take (0, the default, is no limit);
- "one wire per folio report".
When set, a new wire that would go past the limit is refused: the
terminal shows red while dragging, as for any refused link, and a tooltip
says why on release. Auto-connect on placing, moving or multi-pasting a
symbol skips full terminals, and qet.addConductor() refuses with its own
message. Wires already drawn, opening, pasting and undo are never
refused.
Settings > General gets a master switch, on by default, that turns every
rule of this feature off in every project; the project group is greyed
with a note while it is off.
The rules live in wiringrules.cpp. The project setting is saved as
<wiring_rules .../> only when a rule is on, so a project that never used
it saves exactly as before; an older version drops it, which means "off".
tst_wiringrules covers the rules, the save round trip and, through the
real binary, that a wire past the limit is refused unless the master
switch is off (checked to fail with the limit check removed).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015FPuYPS4T7QuEwjNu22rXD
Pressing OK in Projet > Propriétés du projet without changing anything
marked the project modified and rewrote its defaults for new folios.
Besides the Page Num placeholder (fixed separately), four causes:
- Title block custom fields: since #271 the dialog offers the
template's variables for filling in; those left empty came back as
part of the context. Drop the ones not in the stored context.
- DiagramContext::remove() left the key's show flag behind, so a
context with a key removed never equalled one without it.
- Guides: applyConf() marked the project modified whether or not the
guides changed. Compare them like every other setting.
- Wire dash size and cross-reference offsets: the spin boxes cannot
show the stored default (dash size 1 under a minimum of 2; offset 0
under a minimum of 40 shown as "Default"), so the clamped value came
back. Keep the stored value unless the box shows something else, as
#1204 did for the wire panel.
Checked in the GUI (with the Page Num fix as well) on grafcet,
schema_indus and Projet_vierge: OK with no edit then Ctrl+S saves the
same file as Ctrl+S alone; master writes dash-size 1 -> 2, a
cross-reference offset 0 -> 40, and on Projet_vierge 22 empty custom
fields. New test for DiagramContext::remove() fails without the fix.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
QElectroTech now writes qet-assistant.json in the standard data folder
when an editor opens, and again whenever the stored scripts or the
scripting setting change: its version and program, every folder (data,
settings, scripts, the element and title block collections), which
features are on, every call a script can make (QetScriptApi::signatures(),
apiSignatures() without a running script), and the stored scripts with
their ids, files, icons and shortcuts, plus those refused and why. On
quit it says nothing is running any more.
The qet MCP server reads it rather than guessing each folder per
platform, which is wrong as soon as QElectroTech runs with --data-dir:
the file stays where the server can find it and names the folders
actually in use. Readable by the user only.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A new setting, Configurer QElectroTech > Général > "Autoriser un assistant
IA à agir sur le projet ouvert", off by default. Off, nothing changes:
no channel is opened. On, every start shows a warning first -- Continuer,
Pas pour cette session, or Désactiver -- and nothing can connect until
the user answers Continuer. It waits for any other start-up question to
be answered, so the two never stack.
Accepted, LiveServer opens a local socket only the user's account can
use, with a random name and token written to live-session.json in the
data folder for the qet MCP server, and removed when the channel closes.
One JSON request per line: status (project, folio on screen, selection,
last undo step, stored scripts), run_script and run_stored. Requests are
queued out of the socket handler before they run (the lesson of PR #861).
Each run is one undo step named "Assistant : <name>". The status bar
shows the mode and the assistant's last action with a ✓ or ✗ and the
time, and an Arrêter button that closes the channel for the session.
Unticking the setting closes it at once.
QetScripting::runSource() runs script text and, for a live run, returns
what qet.log() wrote, the error with its line and the undo step instead
of showing boxes; qet.showMessage() is logged rather than opening a box
nobody asked for.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Where two wires cross without being connected, a project can now draw a
small arc (a hop) on one of them, instead of the user inserting a jump
symbol and splitting the wire. It is a project setting, off by default:
Project properties > Général > "Croisements de conducteurs", with no
hops, hops on horizontal wires, or hops on vertical wires. Choosing the
orientation rather than following drawing order keeps a project
consistent.
Only the drawing changes: no element is added and no wire is split. A
wire that ends or bends on another one is a junction and never hops,
and a crossing too close to the end of a segment for the arc to fit is
drawn plainly. PDF, SVG and image export and printing show the hops,
since they paint through Conductor::paint(); DXF export, which writes
the segments itself, does not.
The setting is saved as <wire_crossings hop="..."/> under the project
root, next to <usage>, and only when hops are on, so a project that
never used them saves exactly as before.
The geometry is in wirehops.cpp, free of any graphics item, and tested
on its own. Conductor::paintedPath() feeds it the conductors of the
folio from a snapshot of their scene points, rebuilt only when a
conductor changes shape, moves, or enters or leaves a folio; each hop
path is cached the same way. Asking the scene for the conductors in a
rect instead strokes every candidate's shape, which made a 366-wire
folio render 0.6 s slower; with the snapshot the difference is within
measurement noise.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Only one conflict: the include block of
sources/ui/configpage/generalconfigurationpage.cpp, where upstream adds
editor/terminalnamecheck.h next to the two includes of the prefix
editor. All three are kept. The file list in
cmake/qet_compilation_vars.cmake merged itself this time.
Review findings on the prefix editor:
- OK without touching anything changed the file: every row was written
back, so an explicit <prefix/>, which reads as an empty field and
cancels the inheritance, was dropped and that folder started
inheriting its parent's prefix again. A row is now written only when
it was edited or no longer holds what the file has, and the two kinds
of empty field look different: hasPrefix() tells an explicit
<prefix/> from a missing one, which is what the field hint shows.
- load() copied a broken file aside before the user had chosen
anything, so every "Corriger le fichier" left a .bak behind while the
message said nothing had been modified. The copy is now made by
save(), right before the file is replaced: repairing or cancelling
leaves nothing behind, and a copy that cannot be made stops the write
rather than destroying the only copy.
- The button followed the combo box only for "Parcourir...": put back
on "Par defaut" it fell back to the previously saved path instead of
the default one. The directory of the entry being displayed is now
used, "Par defaut" being dataDir()/elements/.
The prefixes of a collection's folders live in a qet_labels.xml that so
far could only be edited by hand, and a hand-edited file is easy to
break: one extra </category> and the file stops being well formed, which
the lookup answers with "no prefix at all". Labels then degrade
silently, without any error anywhere - the file is simply ignored. Add
a way to edit it from the settings.
- "Configurer les préfixes…" next to the user collection path opens
PrefixConfigurationDialog, which lists every folder of that
collection, subfolders included, one line edit each, with "Tout
déplier"/"Tout replier" and OK/Abbrechen. It writes on OK only :
cancelling leaves the collection exactly as it was, and an emptied
field drops the <prefix> again so the folder goes back to inheriting
its parent's.
- QetLabelsFile owns the reading, scanning, structure building and
writing of the file. prefixFromLabelFile() moves there unchanged from
assignvariables.cpp as prefixForPath(), so the lookup used by label
assignment and the one used by the dialog are one piece of code.
- Entries whose folder no longer exists on disk are offered as
Conserver or Supprimer and only applied on OK.
- An unparsable file is copied to qet_labels.xml.bak first, and the
dialog then reports the line and column of the syntax error, with
"Corriger le fichier" as the default choice - such a file may be one
forgotten tag away from being valid - and rebuilds the whole
structure only when "Reconstruire" is picked. A broken file that
cannot be backed up is refused rather than overwritten.
The scan reads non-hidden directories recursively in name order,
without following symlinks. A collection without any subfolder has
nothing to configure and says so instead of opening an empty dialog.
Tests: a standalone harness kept outside the tree (84 checks :
structure, inheritance, explicit empty prefix, orphan handling, broken
file, wrong root element, broken file whose backup cannot be written,
reload after save) and the dialog driven offscreen (29 checks,
including "reject creates no file"). ctest 27/28, the failing
tst_menubarkeyboard being the headless F10 test, unrelated to this.
The new strings are French source strings like the rest of the code;
the .ts files are left to the translation update.
Discussion #1157. IEC 61666 §4.1 requires each terminal to be
identified unambiguously within its object, so two terminals of one
element must not share a name.
On save, the element editor now:
- refuses to save when two terminals share a name, lists the names
("N ×3") and selects those terminals;
- warns, and still saves, when a terminal has no name. Folio reports,
conductor definitions and thumbnails are skipped.
Names are compared after trimming surrounding spaces, case sensitive.
Settings > General > Editor has a new checkbox, on by default, that
turns both checks off (elementeditor/check-terminal-names).
--check-elements applies the same rule: repeated names are a FAIL,
missing names a WARN. It ignores the setting, since it is an explicit
check. On the shipped collection this reports 82 FAILs, the elements
that repeat a terminal name today.
The rule lives in the header-only editor/terminalnamecheck.h, shared
by both, and is unit tested by tst_terminalnamecheck.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The element description dialog only offered typing, so every article of
a catalogue had to be copied in by hand into the Artikelbeschreibung
row of each block, over and over.
Settings > General now keeps the path of a CSV material list (Créer...
writes a template with the header lines), and the Artikelbeschreibung
row of every block of the Bauteil dialog shows a "..." button opening a
searchable listing of that file. "Appliquer" fills the fields of that
block only -- the main block gets everything but label and formula, an
auxiliary block gets description, number, manufacturer, references,
supplier, quantity, unit and additional info -- and a cell that is
empty in the file never erases a value already in the element. The
symbol editor is left alone.
- sources/materiallist/: CSV reading and writing (UTF-8 BOM, ';', every
field quoted, atomic write through QSaveFile), two header lines
(translated labels then the canonical English keys), the selection
window and the new entry form.
- The selection window reads the file again every time it opens, keeps
its size, column widths, column order and sort between openings,
shows every column of the file, scrolls all four directions with the
wheel (Shift + wheel moves the columns) and puts back the order of
the file when the corner above the row numbers or a row number is
clicked.
- German translations for the new strings in lang/qet_de.ts.
#1051 replaced the filtered tree with a ranked flat list. A new checkbox
in Settings > General, "Afficher les résultats de recherche sous forme de
liste triée" (elementscollection/search-flat-list, default on), keeps the
ranked list; unticked restores the pre-#1051 filtered tree search.
The Insert picker and shortcut bar call rankedSearch() directly and are
unaffected. Down/Enter from the search field only apply to the flat list.
Requested by scorpio810 on #1051.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Showing a selected conductor's properties in the selection-properties
dock is now a preference, on the General page under Appearance:
"Afficher les propriétés d'un conducteur sélectionné dans le panneau
Propriétés de la sélection". It is off by default, so selecting a
conductor does what it did before unless the user turns it on.
This replaces the View-menu toggle, which defaulted to on; that entry
is dropped in the merge with master. Same setting key
(diagrameditor/conductor_properties_panel).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The bar's customising window gets an element search next to the command
list. Type part of a name, then drag a hit onto the bar, double-click
it, or press Enter to pin the best one. A pinned element shows as its
icon among the commands, and clicking it places the element, as the
picker does.
Pinned elements are saved in the same list as the commands, by
collection path (common://, custom://, company://), so the row keeps
the user's order. Elements embedded in a project are not offered: their
path names the project as loaded now. Elements are offered for the
empty-folio bar only; with something selected the bar is for acting on
it. Once any element is pinned there, the palette folder grid under the
bar is hidden, and comes back while typing a search.
Dragging a pinned element off the bar onto the commands, or a double
click, removes it. The Preferences page shows pinned elements by name
and icon, and removing one there drops it instead of listing it as a
command. The customising window is now kept on screen, since it is
taller than before.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hold the right button on a folio and drag: a ring appears around the
point where the button went down, showing up to eight commands, and the
one in the mouse's direction is highlighted with its name underneath.
Releasing runs it; releasing near the centre cancels. These are
SolidWorks' mouse gestures.
The commands are the shortcut bar's for the selection, placed clockwise
from the top, so customising the bar customises the ring. As with the
context menu, a right press selects what is under the mouse first.
A plain right click still opens the context menu, now on release on
every platform. The view tracks the right button and opens the menu
itself; the platform's own right-click event (sent on press on X11, on
release on Windows) is ignored while gestures are on, so the menu is
never opened twice. The keyboard menu is unchanged.
The view keeps out of the way while a tool or a placement is running,
since a right click cancels or finishes those, and while a text is
being edited. The new General option "Gestes de la souris avec le
bouton droit" (diagrameditor/mouse_gestures, on by default) turns it
off and restores the previous right button exactly.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit a625142f36e619bb4d4f3551b6086f2dd8eabc86)
After a click that selects something on a folio, a small row of commands
appears just above and to the right of the cursor, as the SolidWorks
context toolbar does. It fades as the mouse moves away and is gone past
200 pixels; a click elsewhere, the wheel, a key press or an emptied
selection hide it too. Clicking a command leaves it up, so rotate can be
clicked again.
The commands are the shortcut bar's for that selection -- elements or
conductors -- at most eight, so customising the bar customises this as
well. It is a child of the view's viewport, never a window, and never
takes the focus.
It is not shown after a drag (moving items, a rubber band), while
placing or drawing (Diagram::eventInterfaceIsRunning()), on
a read-only folio, or when switched off with the new General option
"Afficher les commandes près de la sélection" (diagrameditor/
context_toolbar, on by default).
ShortcutBarSettings::contextFor() now decides the context for both the
bar and this toolbar.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 78f3c1a2bc5c3cf1f7beae4bd60aefec20847d6d)
Right-click the shortcut bar, or click the "…" button at its end, and it
turns into a small window holding two lists: the bar's commands, left
to right, and every other command. Drag a command onto the bar, off
it, or to another place on it; a double click moves it to the other
list. Terminé saves and shows the bar again where it was, with the
result; Annuler, Esc or closing the window leaves it as it was.
"Valeurs par défaut" puts back the defaults for this context.
A Qt::Popup closes on a press outside it and holds the mouse grab, so
the bar is re-shown as a Qt::Tool window for the time of the edit.
Only QSettings is written, through ShortcutBarSettings, never the
project's undo stack.
The popup now looks the commands up itself (popUpShortcutBar(pos,
context)) instead of being handed actions, since it has to rebuild
them after an edit. ShortcutBarSettings::availableIds() lists what can
go on the bar, shared with the configuration page. An empty bar still
shows its "…" button, so it can be filled again.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 4145d4bec1d403126b2a6587105aea47092db8a2)
Pressing S on a folio opens the element picker at the cursor with a row
of commands above it, chosen by what is selected, like the SolidWorks
shortcut bar:
nothing selected insert last element, element picker, text, line,
rectangle, terminal strip plan, paste, folio
properties
elements selected rotate, rotate texts, edit, copy, cut, delete
only conductors reset path, edit, delete
Each row is a list of ShortcutManager ids, so any registered command can
go on it and the bar carries no command list of its own. The lists are
in QSettings (diagrameditor/shortcut_bar/<context>); a context the user
has not changed follows the defaults. A disabled command keeps its
place, greyed, so a row looks the same each time. Clicking a button
closes the bar and triggers the action.
A new configuration page, "Barre de raccourcis", edits the three lists:
add, remove and reorder any diagram editor command.
To make that possible:
- ShortcutManager::action(id, owner) returns the action a given window
registered under an id, since each editor window registers its own.
- The add-item actions (text, image, shapes, terminal strip plan) are
registered as diagrameditor.add_<kind>, with no default key. They also
appear in the Shortcuts page and can now be bound.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 53c1e213282b9f7226ca1c09e81703113236bb88)
Laurent Trinques