- Call updateLabel() explicitly when the xref is created in itemChange for a master that must show its configured contact groups without slaves (same pattern as the PLC branch above).
- Register the hover/click hit rect of a contact independently of its position text again, as before this feature: only the drawing stays guarded by !str.isEmpty(), and the map insert is now keyed on elmt so free slots (nullptr) never enter the map.
- Revert is_power_ctc to the original element-type test (with a null guard): the Power-flag term was redundant for every caller that passes an element, so no linked contact changes classification.
- Clarify the label-order comment: single pole NO/NC are swapped, changeover labels are rotated per pole inside drawContact() (multi pole included), multi pole NO/NC groups keep the master order.
Add a new cross reference setting per xref type (coil, protection,
commutator, PLC), labelled "Afficher tous les esclaves definis par le
maitre" and persisted as showallconfiguredslaves. When it is enabled,
the contacts display is selected and the master declares contact
groups, the contact comb draws every contact group of the master in the
master's own order, even when no slave is linked to it yet. Masters
without declared contact groups and the option turned off keep the
previous behaviour exactly: linked slaves only, sorted by position.
- XRefProperties: new property stored in the settings and in the
project XML (attribute showallconfiguredslaves, absent means false so
old files are unaffected), included in operator==.
- XRefPropertiesWidget: new checkbox placed after the terminal names
one, enabled only while "Afficher en contacts" is selected; its
enabled state is now also set explicitly when a type is loaded (a
radio button that does not change emits no toggled()).
- For the PLC type the contacts/cross radios, the two display
checkboxes and the cross options group are hidden: a PLC master is
always drawn as its IO table, those settings have no effect there.
Positioning and label settings, which the table really uses, stay.
- CrossRefItem: free slots draw the symbol of the group plus the
terminal names the master defines (pairs swapped for a single pole
NO/NC contact, labels of a changeover contact rotated one step
counter-clockwise), without position text and without hover/click.
Linked slaves keep drawing from their own data at their assigned
group position; links without a group are appended at the end in
position order.
- Xref lifecycle: the item is created and kept without linked slaves
for snap-to-bottom (MasterElement::mustShowXrefWithoutSlave) and for
snap-to-label (DynamicElementTextItem::updateXref and
ElementTextItemGroup::updateXref, which now also run when the element
lands on the scene and re-establish their project connection), so a
freshly placed master shows its comb immediately instead of only
after the next settings change. updateLabel() resets its geometry
when the option is turned off again, so no stale ghost stays.
- Add !parentGroup() guard to stale xref removal in updateXref()
to prevent deleting xref data that ElementTextItemGroup::updateXref()
just stored for a grouped text item.
- Replace QStringLiteral("xref") with QETInformation::ELMT_XREF
in linkelementcommand.cpp and masterelement.cpp.
- Fix indentation in plclinkwidget.cpp.
An element can declare contact groups and a max_slaves that disagree with
each other, and nothing reconciles them.
The element editor keeps the two in step: max_slaves sizes the contact
group table, one row per slot. Nothing does so on load, so a hand
written or generated file can carry five groups and max_slaves=2. That
loads without complaint, isFull() then caps linking at two, and
ContactGroupSelectionDialog still offers all five groups -- so the user
is shown groups that cannot be linked to, with nothing to explain why.
When groups are declared they are the slots: a slave occupies exactly
one, and the selection dialog offers exactly these. So take the limit
from the group count, which is also the number the user can see.
max_slaves stays as the fallback for the elements that declare no
groups, which today is every element in the standard collection.
No element in the collection declares contact groups, so this changes
nothing for existing projects.
Verified with two purpose-built fixtures, since no real element
exercises either path: a coil declaring five groups with max_slaves=2
now takes the limit from the groups, and a coil with max_slaves and no
groups still takes the fallback path unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The earlier commit changed MasterElement::isFull() to compare the
contacts in use against max_slaves. That was wrong, and this restores
the original comparison against the number of linked elements.
max_slaves is a number of slots, not of contacts:
- it sizes the contact group table in the element editor, one row per
slot (ElementPropertiesEditorWidget::populateSlaveGroupsTable)
- a group must match the slave's own contact count before it can be
chosen, so a 4 pole slave needs a group declaring 4 and occupies
that single group (ContactGroupSelectionDialog)
- each slave stores exactly one group index
(Element::setGroupIndexForElement)
So a coil declaring 4 slots accepts 4 slaves, whatever their pole
count. Counting contacts made one 4 pole slave fill a 4 slot coil on
its own and refuse three further links that should have been allowed.
ContactUsage stays, and its per-type tally is still what the General
tab needs: how many contacts an auxiliary block must provide is a
different question from how many slots are occupied, and only the
former wants the pole multiplier. The header now says so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Second half of #819: where a coil declares what contacts it provides, the
General tab now reports each type as used against declared rather than as
a bare count.
NO : 3/4, NC : 1/2, inverseurs : 0/1, autres : 0/0
MasterElement::contactCapacity() sums contactCount over the element's
SlaveContactGroup list, per type, reusing the same ContactUsage tally the
used count is built on. The mapping from ElementData::SlaveState onto the
tally's own type is factored into one helper so the used count and the
declared capacity cannot classify a contact differently.
Falls back to the plain count from the previous commit when an element
declares no groups, which is every element in the standard collection
today -- nothing in the corpus declares slaveContactGroups, so this
changes no existing display.
A type used beyond what is declared reads as e.g. "1/0". That is
deliberate: it says this contact does not fit the part.
Display only. Whether a declared capacity should also feed
MasterElement::isFull() is the open question in #819 and is not touched
here.
Verified end to end against a purpose-built fixture, since no existing
element exercises this path: a coil declaring two NO groups of two, one
NC group of two and one changeover group of one parses and reports
NO=4 NC=2 SW=1 other=0 total=7, matching the declaration exactly.
tst_contactusage gains a case covering capacity summed across groups
(10 cases, all passing).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
MasterElement::isFull() decided whether a coil had room left with
connected_elements.size() >= max_slaves
which counts linked *elements*. A slave stands for as many contacts as
its "number" kind information declares, so a 4 pole contact consumed a
single contact from the coil's budget instead of four. 36 elements in
the standard collection declare a number between 2 and 4, so this is
reachable, not theoretical.
Add ContactUsage, a header-only tally holding the two rules that are
easy to get wrong:
- a slave counts once per contact it declares, not once per element
- a changeover is counted once, as sw, and never as one NO plus one
NC. CrossRefItem::NOElements() and NCElements() both return
changeovers, so a count built by adding those two lists together
reports one changeover as two contacts.
The upcoming per-type displays (the used count in the element's General
tab, and the per-type budget on the cross reference) need exactly this
count, so it lives in one place rather than being written out three
times, and isFull() now reads it too.
The header carries no graphics dependency, so the counting rules are
unit tested on their own in tests/qttest/tst_contactusage.cpp,
following the same pattern as diagramsortkeys.h.
Verified: all 9 unit tests pass, and both rules were mutation checked
(counting elements instead of contacts fails 2 tests, counting a
changeover as both NO and NC fails 3). The 23 example projects still
load and export without crash or hang, and qet-lint reports no
regressions against its baseline.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This avoid to parse the same element definition each time user drop the same element in the diagram.
Only the first element build the picture, all other get the created picture which is shared.
2- For use the "implicite shared" QPicture and QPixmap of element, now this isn't the element who build her picture, but a dedicated class who made only this job : build the QPicture and QPixmap of elements.
3- With the two previous novelty, the class CustomElement and GhostElement are became useless, and so was removed.
Some few member function of CustomElement was moved to Element.
git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@5492 bfdf4180-ca20-0410-9c96-a3a8aa849046
From now, the class ElementTextItem is not anymore use in qet. Every texts in a diagram are DynamicElementTextItem.
the Xref item was adapted to dynamic text.
Previously, the comment and location, displayed as a "static text" below the "old text" tagged "label" are now automaticaly converted to DynamicElementTextItem, so visually, these texts stay unchanged
git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@5216 bfdf4180-ca20-0410-9c96-a3a8aa849046
Kellermorph