Ticking or unticking "Afficher un texte de potentiel par folio" in
Folio > Properties only assigned Diagram::defaultConductorProperties.
Nothing recalculated the conductor texts, so texts hidden by the option
stayed hidden after it was turned off (and duplicates stayed visible after
it was turned on) until each wire was edited or the project was reopened.
That made the option look broken, which is part of what #344 reports.
When the option changes, reset each conductor's text visibility from its
own properties, then run calculateTextItemPosition() on every conductor of
the folio so the option is applied again from scratch.
Checked in the GUI on examples/industrial.qet folio 4 (26 wires with text,
19 potentials), master vs this commit: unticking now shows the hidden
texts immediately, ticking hides the duplicates immediately; master's
drawing does not change in either direction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
QETElementEditor, QETDiagramEditor and QETTemplateEditor already
persist their geometry via QSettings; none of the modal QDialog
subclasses did, so any dialog resized to see more of its content
(Search and Replace, Diagram properties, Export, ...) is back to its
default size the next time it's opened.
Adds QET::trackDialogGeometry(), one call at the end of each dialog
constructor (after any default resize()), following the same
restoreGeometry()/saveGeometry() pattern as the three editors above,
stored under [dialoggeometry] and keyed by class name by default. An
explicit key is used for PropertiesEditorDialog, a single class
templated over several unrelated wrapped editors, so they don't all
fight over one saved size.
Covers the 36 dialogs of the original change (#691) plus seven added
since: RenumberElementsDialog, MaterialEntryDialog, AiAssistantDialog,
DuplicateOffsetDialog, ImageTransparentColorDialog, PdfPagesDialog and
WiringListDialog.
Deliberately not touched: BackupDialog and ImageCropDialog, which
setFixedSize() themselves, and MaterialSelectionDialog, which already
restores its own size.
A size saved while the dialog sat partly off-screen is restored on
screen: restoreGeometry() moves it back inside the available screen
(checked: saved at 1502,972 on a 1600x1000 screen, reopened at 600,317).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
-Cette ligne, et les suivantes ci-dessous, seront ignorées--
M sources/aboutqet.cpp
M sources/bordertitleblock.cpp
M sources/conductorproperties.h
M sources/configdialog.cpp
M sources/configpages.cpp
M sources/configpages.h
M sources/createdxf.h
M sources/diagram.cpp
M sources/diagram.h
M sources/diagramcommands.cpp
M sources/diagramcommands.h
M sources/diagramprintdialog.cpp
M sources/diagramprintdialog.h
M sources/diagramschooser.cpp
M sources/diagramschooser.h
M sources/diagramview.cpp
M sources/diagramview.h
M sources/dvevent/dveventaddimage.cpp
M sources/dvevent/dveventaddshape.cpp
M sources/editor/arceditor.cpp
M sources/editor/arceditor.h
M sources/editor/editorcommands.cpp
M sources/editor/editorcommands.h
M sources/editor/elementitemeditor.h
M sources/editor/elementprimitivedecorator.cpp
M sources/editor/elementscene.cpp
M sources/editor/elementscene.h
M sources/editor/elementview.cpp
M sources/editor/ellipseeditor.cpp
M sources/editor/ellipseeditor.h
M sources/editor/esevent/eseventaddtext.cpp
M sources/editor/esevent/eseventaddtextfield.cpp
M sources/editor/esevent/eseventinterface.cpp
M sources/editor/graphicspart/customelementpart.h
M sources/editor/graphicspart/parttext.cpp
M sources/editor/graphicspart/parttext.h
M sources/editor/graphicspart/parttextfield.cpp
M sources/editor/graphicspart/parttextfield.h
M sources/editor/lineeditor.cpp
M sources/editor/lineeditor.h
M sources/editor/polygoneditor.cpp
M sources/editor/qetelementeditor.cpp
M sources/editor/qetelementeditor.h
M sources/editor/rectangleeditor.cpp
M sources/editor/rectangleeditor.h
M sources/editor/styleeditor.cpp
M sources/editor/styleeditor.h
M sources/editor/terminaleditor.cpp
M sources/editor/terminaleditor.h
M sources/editor/texteditor.cpp
M sources/editor/texteditor.h
M sources/editor/textfieldeditor.cpp
M sources/editor/textfieldeditor.h
M sources/editor/ui/elementpropertieseditorwidget.cpp
M sources/elementdefinition.cpp
M sources/elementdeleter.cpp
M sources/elementdeleter.h
M sources/elementdialog.cpp
M sources/elementscategorieslist.h
M sources/elementscategorieswidget.cpp
M sources/elementscategorieswidget.h
M sources/elementscategory.cpp
M sources/elementscategorydeleter.cpp
M sources/elementscategorydeleter.h
M sources/elementscategoryeditor.cpp
M sources/elementscategoryeditor.h
M sources/elementscollection.cpp
M sources/elementscollectioncache.cpp
M sources/elementspanel.cpp
M sources/elementspanel.h
M sources/elementspanelwidget.cpp
M sources/elementspanelwidget.h
M sources/elementtextsmover.h
M sources/exportdialog.cpp
M sources/exportdialog.h
M sources/exportproperties.cpp
M sources/exportpropertieswidget.cpp
M sources/exportpropertieswidget.h
M sources/genericpanel.cpp
M sources/integrationmoveelementshandler.cpp
M sources/integrationmoveelementshandler.h
M sources/interactivemoveelementshandler.cpp
M sources/nameslistwidget.cpp
M sources/nameslistwidget.h
M sources/newelementwizard.cpp
M sources/newelementwizard.h
M sources/nomenclature.cpp
M sources/nomenclature.h
M sources/projectconfigpages.cpp
M sources/projectview.cpp
M sources/projectview.h
M sources/qet.cpp
M sources/qetapp.cpp
M sources/qetapp.h
M sources/qetdiagrameditor.cpp
M sources/qetdiagrameditor.h
M sources/qetgraphicsitem/conductor.cpp
M sources/qetgraphicsitem/conductortextitem.cpp
M sources/qetgraphicsitem/customelement.cpp
M sources/qetgraphicsitem/diagramimageitem.cpp
M sources/qetgraphicsitem/diagramtextitem.cpp
M sources/qetgraphicsitem/diagramtextitem.h
M sources/qetgraphicsitem/element.cpp
M sources/qetgraphicsitem/ghostelement.cpp
M sources/qetgraphicsitem/qetshapeitem.cpp
M sources/qetgraphicsitem/terminal.cpp
M sources/qetgraphicsitem/terminal.h
M sources/qeticons.cpp
M sources/qeticons.h
M sources/qetmainwindow.cpp
M sources/qetmessagebox.cpp
M sources/qetmessagebox.h
M sources/qetprintpreviewdialog.cpp
M sources/qetprintpreviewdialog.h
M sources/qetproject.cpp
M sources/qetsingleapplication.cpp
M sources/qettabbar.h
M sources/qfilenameedit.cpp
M sources/qtextorientationspinboxwidget.cpp
M sources/qtextorientationspinboxwidget.h
M sources/qtextorientationwidget.cpp
M sources/qtextorientationwidget.h
M sources/richtext/richtexteditor.cpp
M sources/richtext/richtexteditor_p.h
M sources/richtext/ui_addlinkdialog.h
M sources/titleblock/dimensionwidget.h
M sources/titleblock/gridlayoutanimation.h
M sources/titleblock/helpercell.h
M sources/titleblock/integrationmovetemplateshandler.cpp
M sources/titleblock/integrationmovetemplateshandler.h
M sources/titleblock/qettemplateeditor.cpp
M sources/titleblock/qettemplateeditor.h
M sources/titleblock/templatecellsset.h
M sources/titleblock/templatecellwidget.cpp
M sources/titleblock/templatecellwidget.h
M sources/titleblock/templatecommands.cpp
M sources/titleblock/templatedeleter.cpp
M sources/titleblock/templatedeleter.h
M sources/titleblock/templatelocationchooser.cpp
M sources/titleblock/templatelocationchooser.h
M sources/titleblock/templatelocationsaver.cpp
M sources/titleblock/templatelocationsaver.h
M sources/titleblock/templatelogomanager.cpp
M sources/titleblock/templatelogomanager.h
M sources/titleblock/templateview.cpp
M sources/titleblock/templatevisualcell.h
M sources/titleblockcell.cpp
M sources/titleblocktemplate.cpp
M sources/treecoloranimation.h
M sources/ui/conductorpropertieswidget.cpp
M sources/ui/diagrampropertiesdialog.cpp
M sources/ui/diagramselection.cpp
M sources/ui/dialogautonum.cpp
M sources/ui/dialogwaiting.cpp
M sources/ui/elementpropertieswidget.cpp
M sources/ui/elementselectorwidget.cpp
M sources/ui/linksingleelementwidget.cpp
M sources/ui/masterpropertieswidget.cpp
M sources/ui/potentialtextsdialog.cpp
M sources/ui/projectpropertiesdialog.cpp
M sources/ui/selectautonumw.cpp
M sources/ui/titleblockpropertieswidget.cpp
M sources/ui/xrefpropertieswidget.cpp
M sources/undocommand/changeelementinformationcommand.cpp
git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@3783 bfdf4180-ca20-0410-9c96-a3a8aa849046
several diagram can share the same autonumerotation.
This is first step, need to be improved and readd some feature (disabled for first step).
git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@3239 bfdf4180-ca20-0410-9c96-a3a8aa849046
ispyisail