Reviving the still-relevant part of #785, closed 2026-09-10 purely to
clear a review backlog, not on merit. Investigated fresh against
current master -- one of the original PR's three targets turned out
to already be fixed independently: element_nomenclature_view's SQL
predicate for exclude_from_bom already does
"COALESCE(LOWER(TRIM(ei.exclude_from_bom)), '') NOT IN ('true', '1',
'yes', 'on')" (projectDataBase::createElementNomenclatureView()).
auto_num_locked and potential_isolating had no equivalent: five call
sites across terminal.cpp, terminalnumberingdialog.cpp and
elementinfowidget.cpp compared the raw stored string against the
literal "true" with QString::operator==, silently treating "True",
"TRUE", a trailing space, or any value written by something other
than this app's own checkbox as off -- with no error and no visible
difference from the checkbox being genuinely unticked.
Added QET::infoFlagIsTrue(), matching the same accepted spellings
("true"/"1"/"yes"/"on", case-insensitive, trimmed) the SQL predicate
already uses, and switched all five call sites to it.
Verified the exact comparison logic in isolation, outside any QET
build: 15 cases including "True", "TRUE", padded whitespace, "1",
"yes", "on", and their false counterparts -- all correctly
discriminated. Qt 6.10.2, ctest 13/13.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Split from #913's second suggestion. There was no shortcut for the common
"duplicate with offset" convention; the nearest existing feature,
"Collage multiple", is a different workflow (a dialog for repeating a
paste in a grid pattern, not a one-shot duplicate).
Ctrl+D copies the selection and places it immediately, offset by a
configured spacing and direction -- no interactive follow-the-cursor
step, unlike Ctrl+V. The first press (or after the setting is explicitly
reopened) shows DuplicateOffsetDialog: spacing in grid steps, direction
up/down/left/right. Every later press reuses whatever was confirmed then,
silently, so a row of copies is one key held down and tapped, not a
dialog every time -- unattended, repeatable stamping is the actual point
of a duplicate shortcut, which a dialog or an interactive placement step
on every press would defeat. A separate "Configurer la duplication..."
entry reopens the dialog on demand to change the setting later. Cancel
leaves the diagram untouched -- verified, not assumed: qet_diff against
the saved file shows 0 added.
Chaining ("keep tapping to lay out a row") needs no special handling:
QET already reselects whatever a paste just added
(PasteDiagramCommand::redo()), so the next Ctrl+D naturally continues
from the copy just placed rather than the original.
The offset is applied by hand rather than by asking paste()/fromXml() to
place the copy at a target position. Both of those feed the position
through Diagram::snapToGrid(), which reads
QApplication::keyboardModifiers() and rounds to the nearest PIXEL instead
of the grid whenever Ctrl is held -- and Ctrl is always held here, this
action's own shortcut being Ctrl+D. Measured before settling on this:
routing the offset through paste() first produced copies off-grid on both
axes, by an amount that tracked the selection's own bounding-box geometry
rather than being a fixed error -- caught by qet-mcp's qet_elements
against the saved file, not by eye. fromXml() is instead called with no
position argument at all (leaves every item at its source coordinates,
landing the copy on top of the originals -- (0,0) is not a position, this
is "keep the source coordinates"), and the offset is added directly with
setPos(). A plain addition cannot be off by a rounding rule that never
runs.
Conductors are not in the hand-translated set: fromXml() itself does not
reposition them either -- they load after elements are already in their
final place and take their geometry from their terminals, which have
already moved with the elements that own them. Verified this holds: drew
a conductor by hand between two elements (drag, not click-click),
selected both, Ctrl+D, and the new conductor correctly joins the two new
elements via qet_conductors -- not the originals, not a mix.
Verified end-to-end on a built binary via qet-mcp, not by eye:
before L2 (303,207) L9 (512,196) -- deliberately off-grid
spacing=2, down (303,227) (512,216) -- +0,+20 exactly
same again, 2nd (303,247) (512,236) -- +0,+20 again, chained
Both elements land exactly the configured offset from their immediate
source regardless of the selection's own alignment. Qt 6.10.2, ctest
11/11.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A script reaches the whole project and, through the export calls, the
filesystem. That is a capability most people installing an electrical CAD
program never asked for, and leaving it on by default hands it to them
anyway. So QET_HAS_SCRIPTING builds now ship with it switched off.
QetSettings::scriptingEnabled() is the single answer, read by all three
places that need it, with QET_ENABLE_SCRIPTING=1 overriding the stored
value. The override is not decoration: a CI job or a batch run has no
dialog to tick, and a machine whose HOME is created fresh for each run has
nowhere to keep the setting either. It beats a stored "false" on purpose,
so a box unticked once cannot lock a build server out of --run for good.
Only the exact value "1" counts.
--run refuses with exit 3 and a message naming both ways in.
Projet > Exécuter un script... asks once, and turns the setting on if
the answer is yes. Asking beats grey: a disabled menu
entry says something exists and nothing about how to have
it, and this is the pattern people already know from
macro security in office software.
Configurer QElectroTech > Général > Projets has the checkbox, for
turning it back off. While the environment forces
scripting on, the box is disabled and says why, and
applyConf() then leaves the stored value alone rather
than quietly overwriting it.
runOnProject() checks as well, after both callers have. It is the one
function that actually evaluates JavaScript, so it is the one place a
future caller cannot forget to ask; the callers check first only to give a
better answer than it can.
Verified on the built binary, all four states, with an isolated HOME:
stored env result
absent - refused, exit 3
true - script runs, exit 0
false - refused, exit 3
false 1 script runs, exit 0
tst_scriptingsetting covers the same matrix hermetically, in its own
QSettings scope, and was mutation-checked: flipping the default to true
turns defaultsToOff() red.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Add a KColorButton next to the 'Utiliser les couleurs du système'
checkbox in the Apparence settings tab:
- When the checkbox is active (default), system colors are used
and the color button is disabled
- When the checkbox is inactive, the color button becomes active
and lets the user pick any color for the entire application
- useCustomPalette() builds a full QPalette from the chosen color
with proper light/dark text contrast, button shading, and icon
theme switching
- The chosen color is persisted in QSettings as
'customapplicationcolor' and restored on next startup
Files changed:
- sources/ui/configpage/generalconfigurationpage.ui: HBoxLayout
with checkbox + KColorButton, customwidget declaration
- sources/ui/configpage/generalconfigurationpage.h: new slot
- sources/ui/configpage/generalconfigurationpage.cpp: load/save
custom color, enable/disable logic, toggled slot
- sources/qetapp.h: useCustomPalette() declaration
- sources/qetapp.cpp: useCustomPalette() implementation,
startup restore of custom color
Replace the white/grey toggle (m_grey_background) with a full color
picker widget (DiagramBgColorToolButton) in the Affichage toolbar,
matching the existing ConductorColorToolButton UX:
- Preset colors: White, Off-white, Light grey, Grey, Dark grey, Black
- Recently used colors section
- "Autre couleur..." opens QColorDialog for any custom color
- "Couleur système" restores the default dark-mode inverted background
New features:
- Diagram::m_custom_background_color flag: when the user picks a
custom color, PaletteGraphicsView skips lightness inversion so the
chosen color is displayed as-is
- Border and titleblock text/lines automatically switch between black
and white based on Diagram::background_color.lightness(), so a dark
background always shows a visible light border and titleblock content
- "Couleur système" restores Qt::white + re-enables inversion
Files changed:
- New: sources/ui/diagrambgcolorbutton.h/.cpp
- sources/diagram.h/.cpp: added static m_custom_background_color flag
- sources/palettegraphicsview.cpp: skip inversion when custom bg active
- sources/bordertitleblock.cpp: adaptive border pen color
- sources/titleblocktemplate.cpp: adaptive ink color for cell borders/text
- sources/qetdiagrameditor.h/.cpp: replace toggle with new widget
- cmake/qet_compilation_vars.cmake: register new source files
The settings and project dialogs list their pages with 64 or 128 pixel
icons, and two pages had theirs at 22 pixels only: the terminal-strip
page and the shortcuts page, which borrowed configure-toolbars. Both get
a 128 pixel icon drawn in the style of the other page icons, the
shortcuts page under its own name, configure-shortcuts. The SVG sources
sit beside the PNGs.
On a dark palette the Printing and Export pages were small too: their
128 pixel icons exist in the light theme only, and Qt inherits by name,
not by size, so the dark theme's small copies were scaled up instead.
make_icon_themes.py now aliases the light files of the sizes a dark name
lacks, when they read on the dark window at 3:1.
A test asks the theme for every page icon at 128 pixels, on both
palettes.
Fixes#960
Add a 'Numérotation auto' tab to the global settings page (Settings >
Nouveau projet) where users can define default auto-numbering rules
for Conducteurs, Eléments, and Folios. These rules are automatically
transferred to every new project created.
Changes:
- Add NumerotationContext::saveToSettings()/loadFromSettings() static
helpers for persisting named numerotation contexts via QSettings
- Add 'Numérotation auto' tab to NewDiagramPage with three sub-tabs
using SelectAutonumW widgets (same UI as project properties)
- Add save/remove/persist slots for conductor, element, and folio
contexts with immediate QSettings persistence on every change
- NewDiagramPage::applyConf() saves autonum settings when editing
global defaults (no project)
- QETProject constructor loads global autonum settings from QSettings
for new empty projects
An electrician on the forum draws 400 V and 24 V circuits in the same
folio and wants the colour to be one click away
(qelectrotech.org/forum, viewtopic pid=23296). Today the quickest route
is F2, which opens a colour dialog and refuses to act unless exactly one
conductor is selected, so colouring a run means one conductor, one
dialog, at a time.
This adds a swatch button beside the auto-conductor actions. Picking a
colour does two things:
- recolours every conductor currently selected, as ONE undo step;
- becomes the colour of the next conductor drawn, through the
LastUsedStyle mechanism #888 already added and Conductor's
constructor already reads.
Either half is useful alone: with nothing selected it just sets the pen
for what comes next.
The menu lists the colours the trade names -- the three phases, neutral,
earth, and the ones used for control and extra-low-voltage circuits --
then any custom colours picked this session, then the full colour
dialog. A colour already in the standard list is not repeated under
"recently used".
Nothing is written to the project or to QSettings. That is deliberate:
it is the same session-scoped "what did I just use" idea as
LastUsedStyle, so it adds no persisted state and no file-format change.
Named presets stored per project -- what #461 actually asks for -- are a
larger feature that needs a maintainer decision first; the question is
still open on that issue since 21 June.
Verified on a virtual display against examples/Habitat-Schemas_developpes.qet,
reading colours back from the saved project rather than the screen:
select all on folio 1, pick Rouge
21 conductors {none:1, #ff5500:2, #ff0000:6, #00aa00:5, #0000ff:7}
-> all 21 #ff0000
one Ctrl+Z
-> back to the original five-colour mix, exactly
pick Marron with nothing selected, then draw a conductor
-> the new conductor is #7b3f00
ctest 12/12, Qt 6.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CaKympWT3owLotCpEN2CFj
QET had no icon theme: the 446 entries of the icon table and the 116
iconsets in .ui files each named a resource path, so an icon could only
ever be one file, and a variant for another palette or a vector source
had nowhere to go (GitHub #466, #690, #870). This adds the theme layout
without changing a single pixel; a dark variant comes in a follow-up.
The theme "qet" follows the freedesktop layout Qt's icon loader
understands. misc/make_icon_themes.py generates ico/icon-themes.qrc,
which aliases the existing ico/<size>/<name>.png files into
themes/qet/<size>/<name>.png, and ico/themes/qet/index.theme. No file
moves. The four table entries that paired a 16 pixel file with a 22
pixel file of another name (ConductorSettings, DiagramAdd,
DiagramDelete, DialogInformation) get the 22 pixel file aliased under
the 16 pixel name.
QETApp::initIconTheme() registers the theme before initIcons() and makes
it current on every platform, so a desktop icon theme cannot replace
QET's icons. Icons are then looked up by name: QIcon::fromTheme() in
qeticons.cpp and in the few places that built a QIcon from a resource
path directly, and theme="..." on the iconsets in .ui files, with the
resource path kept as fallback. Flags, color swatches, application and
MIME icons stay on their paths.
One entry does not go through the theme. The elements panel draws the
project root with ProjectFileGP in the 50 pixel slot it reserves for
element previews, and the name "project" also carries the 128 pixel
file the configuration dialog uses. On a 2x display Qt's loader picks
that file for a 50 pixel request and fills the slot. ProjectFileGP
loads the 16 and 22 pixel files directly, as before.
tests/qttest/tst_qeticons: every name in the theme resolves, the four
aliases resolve at 22 pixels, a Fusion tool button shows its icon at
3:1 with disabled weaker than enabled, and the project root icon stays
at 22 pixels or less when asked for 50 at 2x while the configuration
dialog still gets its 128 pixel file. The rendering helpers shared
with tst_qetpalette moved to tests/qttest/inkcontrast.h.
Refs discussion #886: a saved-report manager built on custom SQL and
nomenclature.json. Most of what was asked for already existed --
Projet > Exporter au format CSV already builds/saves/reuses named
SELECT queries via ElementQueryWidget and nomenclature.json, and
Projet > Ajouter une nomenclature already inserts one into a folio.
This fills the three real gaps.
- projectDataBase::isReadOnlySelect() rejects anything that isn't a
single SELECT/WITH statement. Checked in newQuery() itself, the one
choke point every query path already goes through -- including a
query loaded from a saved nomenclature/summary table's <query>
element on project open, not just the dialog's own custom-SQL box.
ElementQueryWidget shows the same check live as you type, and
BOMExportDialog surfaces it before running or exporting anything.
- BOMExportDialog gains a Preview button + table (QSqlQueryModel),
so a report can be checked on screen before committing to a CSV file.
- ElementQueryWidget gains Importer.../Exporter... buttons that
read/write nomenclature.json's saved reports as a JSON file, so a
report can be handed to a colleague or another install. Import asks
before overwriting a locally-saved report of the same name.
Verified: Qt 6.10.2, builds clean, ctest 8/8. Drove the real dialog
through Xvfb: typed "DROP TABLE element" into the custom-SQL box and
got the inline warning immediately, then confirmed Preview also
refuses it with a "Requête refusée" dialog rather than running it.
Preview against the real default query returned live column headers
and a row. Export opens a save dialog without crashing.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Another exception: one non-converted code path in projectprintwindow.cpp to be followed-up.
One issue found in the Qt6 code path of diagramview.cpp which has been fixed.
- Add !parentGroup() guard to stale xref removal in updateXref()
to prevent deleting xref data that ElementTextItemGroup::updateXref()
just stored for a grouped text item.
- Replace QStringLiteral("xref") with QETInformation::ELMT_XREF
in linkelementcommand.cpp and masterelement.cpp.
- Fix indentation in plclinkwidget.cpp.
The Selection properties "texts" tab painted the color value's own text in
that color, so the default black was unreadable on a dark palette. Show a
swatch in the cell instead and leave the text in the palette's color.
The terminal plan preview draws black ink with a white brush, like the
printed page it previews, on whatever background the view inherits from
the palette. Give the view a white background.
Two additional bugs found after the initial xref cleanup:
1. Undo after unlink did not restore PLC variables (PLC_TYPE,
PLC_ADDRESS, etc.) because PlcLinkWidget::on_m_unlink_pb_clicked()
never stored the current group index in the LinkElementCommand.
makeLink() only populates PLC fields when group_idx >= 0, so
the slave was re-linked but appeared empty. Fixed by reading the
group index from the master via groupIndexForElement() and calling
setGroupIndex() before unlinking.
2. m_update_slave_Xref_connection was only cleared inside the
if(m_slave_Xref_item) block in the updateXref() cleanup path.
For AlignHCenter (Text field) position, no m_slave_Xref_item
is ever created — the connections are stored in
m_update_slave_Xref_connection but never cleaned up on unlink.
On re-link, the old stale entries prevented new connections from
being established. Fixed by clearing the list unconditionally
in the cleanup path.
Forum #3186 / issue #850: a user who has built up conductor and element
numbering rules in one project has no way to reuse them in the next one.
The only answer today is to open both .qet files in a text editor and copy
the XML across by hand.
Adds an "Import from another project..." button to the auto-numbering page
of the project properties dialog. It offers every numbering found in the
chosen file, per category, with names that already exist here unticked by
default and a "replace same-named numberings" option for when that is what
the user wants.
The source file is parsed as plain XML rather than opened as a QETProject.
Opening it would run the whole load path, including the modal dialog raised
for a file written by a different version of QElectroTech -- a dialog the
user has no reason to see, since nothing but the <newdiagrams> block is
being read.
Two supporting changes:
- readValuesFromProject() clears the three combo boxes before filling
them. It only ran once before; it now runs again after an import, and
without the clear every name appeared twice.
- FolioAutonumberingW::setContext() likewise replaces its list instead
of appending to it. It has a single caller, the line above.
This deliberately does not attempt the project-template feature also raised
on the forum thread. That needs decisions about where templates live and
what else they carry, and is better settled in a discussion first.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This reverts merge commit 3d5799773, restoring shortcutsconfigpage.cpp to
its state before it.
#759 and #821 fix the same issue (#757). #821 was opened on 8 September and
is the better fix; #759 was merged on 12 September without checking whether a
PR for it already existed, and its merge is what left #821 conflicting with
master. Reverting is the way to let the right change land.
#759 keys conflict detection on the row's category, which is a tr() string.
#821 keys on the shortcut ID prefix, which is stable and untranslated, and
encodes the overlaps the category cannot express: main-window actions are
live while any editor is open, and the depth.* actions are installed into
both the diagram and the element editor.
Checked against the registry rather than by reading -- 94 registered actions
plus the four depth.* ones registered through QObject::tr. On the shipped
defaults the two behave identically: all 24 shared sequences are legitimate
cross-editor duplicates and neither flags them. They diverge on shortcuts a
user assigns, where #759 misses four classes of real conflict that #821
catches: a diagram or element editor action given the main window's F1, and
a diagram or element action given a depth.* sequence.
The reason #759 looked adequate is that the scope prefix currently maps
one-to-one onto the translated category for all seven scopes, so same-scope
detection comes out the same either way. It fails only where scopes overlap,
which is the case #821 exists to handle.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Follows @scorpio810's review note on merging #630:
ORDER BY diagram_position, wire_number sorts wire numbers as text,
so "10" comes before "9".
Confirmed against the corpus: perceuse.qet put 111 before 12, and
affuteuse_250h.qet put 45 before 5. industrial.qet happened to look
correct only because its wire numbers are all the same width.
Wire numbers are free text and are not always numeric -- perceuse.qet
also carries an unresolved "%sequ_1" -- so the ordering has to cope with
both. Numeric values come first, ordered by value; anything else follows,
ordered as text. The trailing wire_number keeps ties stable.
Fixed in both places the query appears: the CLI exporter and the wiring
list dialog. They had the same ORDER BY, so fixing only one would have
made the dialog and --export-wiring disagree about the order of the same
data.
Verified on perceuse, affuteuse_250h, industrial and tremie_vibrante:
zero out-of-order numeric pairs afterwards, row counts unchanged, and
"%sequ_1" now sorts after the numbers rather than among them. Folio 3 of
perceuse.qet reads 0 1 2 3 4 4 5 5 6 6 7 7 12 12 where it previously
interleaved 111 before 12.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
#824 read the pixmap through the pointer overload, which Qt 5.15
deprecates, so the fix it introduced compiled with two deprecation
warnings of its own. Qt 5.15 offers the by-value form behind
Qt::ReturnByValue, so both branches can take the same overload and the
difference reduces to the argument.
Equivalent: the pointer overload returns nullptr when no pixmap is set,
which the old expression turned into a null QPixmap; pixmap(
Qt::ReturnByValue) returns a null QPixmap directly. It also drops the
null check, so the Qt5 branch is now a single expression.
Verified both arms of the #if, since a preprocessor-branched change is
only half tested otherwise:
- Qt 5.15.18: deprecation warnings for this file 2 -> 0, builds clean,
binary runs
- Qt 6.10.2: builds clean, 488/488, links
- 22 example projects load and export with no crash or hang
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
max_slaves records how many contacts a part is expected to carry. It was
enforced as a rule the drawing had to obey, which obstructs the way both
@scorpio810 and @IBSYSLevi described working in #819: draw the schematic
first, choose the physical hardware afterwards. A limit that refuses the
link forces the hardware decision up front, which is exactly what they
said gets in the way.
Two changes, both in the UI rather than in isFull(), which stays the
query it always was:
- MasterPropertiesWidget::on_link_button_clicked() now says the limit
is reached and asks whether to link anyway, defaulting to yes,
instead of refusing outright.
- LinkSingleElementWidget no longer removes a full master from the
candidate list. That was the worse half: a master at its limit simply
was not there, indistinguishable from one that does not exist, with
nothing to say why. It now stays selectable and the user decides.
PLC masters are deliberately left alone. Their limit is the number of
declared IO slots, which is structural rather than advisory -- a link
past it would have no IO index to map to -- and PlcLinkWidget already
tells the user when it hides one, via m_hidden_masters_label.
Only coils that opt into a limit are affected: max_slaves defaults to
-1, and no project in examples/ sets it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two units were being stacked in the same block. The line above reports
max_slaves, which is a number of slots, so reporting the line below in
contacts made a coil with one 4 pole slave read "maximum 4 / used 4"
while three slots were still free.
The total goes back to counting linked elements, matching the unit of
the line above it and restoring the original behaviour of that line.
The per-type breakdown keeps the pole multiplier, because that is the
question it answers -- how many contacts an auxiliary block must
provide -- and is now prefixed "Contacts :" so the two units are not
mistaken for each other.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Second half of #819: where a coil declares what contacts it provides, the
General tab now reports each type as used against declared rather than as
a bare count.
NO : 3/4, NC : 1/2, inverseurs : 0/1, autres : 0/0
MasterElement::contactCapacity() sums contactCount over the element's
SlaveContactGroup list, per type, reusing the same ContactUsage tally the
used count is built on. The mapping from ElementData::SlaveState onto the
tally's own type is factored into one helper so the used count and the
declared capacity cannot classify a contact differently.
Falls back to the plain count from the previous commit when an element
declares no groups, which is every element in the standard collection
today -- nothing in the corpus declares slaveContactGroups, so this
changes no existing display.
A type used beyond what is declared reads as e.g. "1/0". That is
deliberate: it says this contact does not fit the part.
Display only. Whether a declared capacity should also feed
MasterElement::isFull() is the open question in #819 and is not touched
here.
Verified end to end against a purpose-built fixture, since no existing
element exercises this path: a coil declaring two NO groups of two, one
NC group of two and one changeover group of one parses and reports
NO=4 NC=2 SW=1 other=0 total=7, matching the declaration exactly.
tst_contactusage gains a case covering capacity summed across groups
(10 cases, all passing).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Requested in #819: after drawing a schematic you need to know how many
NO, NC and changeover contacts a coil ended up using, so you can pick an
auxiliary block that satisfies it. Until now the General tab reported
only a single total, and counting the contacts by type meant counting
rows on the cross reference by hand.
Three changes to that block:
- the used count now counts contacts rather than linked elements. The
label already said "contacts" while the value was
linkedElements().count(), so a slave standing for several contacts
was under-reported. It reads MasterElement::contactUsage(), the
same count isFull() uses.
- a breakdown line is added below it, printed only when the master
actually has contacts to break down.
- a declared limit of -1 means "no limit set" rather than a real
limit, so it is printed as such instead of showing "-1", which
reads as a bad value.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
ClickableImageLabel::mousePressEvent() calls pixmap().isNull() and
pixmap().width(). That is the Qt6 signature; in Qt5 QLabel::pixmap()
returns const QPixmap * and the code does not compile:
error: request for member 'isNull' in '...QLabel::pixmap()',
which is of pointer type 'const QPixmap*'
CMakeLists.txt defaults QT_VERSION_MAJOR to 5 when it is not specified,
so a default configuration of master has not built since 6b577ee75.
Read the pixmap once into a local, guarded the way the rest of the
codebase handles this split, which also drops four repeated pixmap()
calls in the same expression.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Shapes and images can now be resized, rotated, and skewed directly
on the canvas, not just moved. Both share one small transform
struct (rotation, then skew, then scale, anchored on a movable
pivot) and one handle widget, so a corner drag, an edge skew, or
grabbing the rotate handle behaves the same way and runs through
the same matrix math everywhere, instead of every item type
reinventing its own.
Shapes also gained a proper pen tool (bezier paths, corner/smooth/
symmetric nodes), arc support, and mirroring. Images gained
non-destructive cropping and colour-keyed transparency, both
remember their own settings, so reopening the dialog picks up
where you left off instead of starting over.
Properties dialogs for both were extended to match (position,
size, angle, skew), with undo/redo wired through for every handle
drag.
Old XML files can read easily as the transformation is only added
if needed and the old syntax is still used and understood if it is
not needed.
ispyisail