The redraw on change was connected in setTerminalStrip() only, used when
an item is read from the project. An item added with the "Add terminal
strip" dialog is built with TerminalStripItem(strip), which did not
connect: it was not redrawn after the terminal strip editor was applied,
until the project was reopened.
Both constructors now go through connectStrip().
TerminalStripItem was connected to nothing: after applying the terminal
strip editor (width, catalog terminal, color, type...), undo or redo, the
strip drawn on the folio kept its old drawing until something else made
the scene repaint, and its bounding rect was not updated when the width of
the terminals changed.
- TerminalStrip::dataChanged() is emitted when the data of the strip is
set, and when the data of the element of one of its terminals changes
(Element::setElementData(), Element::setElementInformations()).
- TerminalStripItem connects to dataChanged(), orderChanged(),
bridgeChanged() and bridgeColorChanged() of its strip, and updates its
geometry and redraws itself.
The realistic styles drew every terminal of a strip with the clamp of the
layout (RealisticScrew or RealisticPushIn), whatever terminal was chosen:
a Phoenix Contact ST (spring) was drawn with screws in a screw layout.
Each entry of the terminal catalog now has its clamp: screw (Phoenix
Contact UT, Weidmüller WDU, ABB Entrelec M, Legrand Viking 3), spring
(Phoenix Contact ST) or push-in (WAGO TOPJOB S). A terminal chosen in the
catalog is drawn with its own clamp, the spring-cage ones like the push-in
ones; the clamp of the layout is kept for the other terminals, so a strip
mixing screw and spring terminals is drawn as it is.
In the realistic styles, some types of terminal get the parts seen on
the real products:
- fuse terminal: black hinged fuse holder on the middle of the terminal,
with its hinge pin, a window on the fuse, a ribbed grip and, for a
fuse terminal with led, a red led
- sectional (disconnect) terminal: orange knife with its hinge and grip
- test terminal: two brass test sockets between the wire entries and
the middle band (in the middle band for a terminal with levels)
The marker tag and the type symbol are drawn on the lever. The lever is
shorter with screw clamps and stays on the middle band for a terminal
with levels.
The realistic styles don't write the xrefs, so each terminal becomes a
clickable zone, like the xref text of the schematic style:
- double-click on a terminal goes to its element on the folio
- the terminal under the mouse is outlined in blue, and a tool tip
shows its label and its xref
- the zones are exported as clickable links in the PDF
A terminal with one level is clickable on its whole body; a terminal
with levels is clickable on the rows of wire entries of each level.
Only the terminals with an xref (element placed on a folio) are
clickable. The zones use the same physical / real indexes as the
schematic style, so the double-click and the PDF export need no
other change.
Add two realistic drawing styles for the terminal strip plan, besides
the existing schematic one:
- Realistic (push-in) and Realistic (screw): the strip seen from above,
at scale (real width of each terminal), like a cabinet mounting
drawing: end stops, group marker carrier with the strip name, one row
of wire entries per level, bridge channels with red bridges, marker
tags with the terminal number, type symbol (fuse, LED, diode,
sectional, ground...), green/yellow PE and terminal color.
The style is chosen for each plan in the "Add terminal strip plan"
dialog and saved with the item (attribute draw_style of
terminal_strip_item). Items saved before keep the schematic style.
Several plans of the same strip can use different styles.
The values used by the realistic styles are in the layout (scale in
px/mm, terminal length in mm, end stops, group marker) and can be set
in the layout editor, whose style combo box only changes the preview.
Separator plates: a new "Separator plate after" check box column in
the terminal strip editor, stored in the terminal element informations
(key terminal_separator). Drawn as a plate at scale in the realistic
styles and as a thick line in the schematic style.
New files: realisticterminalstripdrawer.{h,cpp} (realistic drawing) and
terminalstripdrawerhelpers.h (helpers shared with the schematic drawer).
Every marker tag of a strip has the length of its longest terminal
number (at least two digits), so three-digit numbers are no longer
reduced. The font is still reduced if a number doesn't fit the text
zone of the layout.
- The xref is drawn as plain text, without marker tag.
- Every marker tag of the terminal numbers has the same length
(two digits), the font is reduced when the number is longer.
- The body of every terminal reserves the zone of the longest xref
of the strip, so all terminals of a strip are drawn the same way.
- Draw only the terminal number (part after the last ':'), the strip
name is already in the header; the manager and the tree still show
the full label.
- Clip texts to the width of their terminal and shrink the font in
narrow terminals so they no longer overlap.
- New housing: body with narrower wire entry caps and a slope between
them, grey by default (terminals with a color or a ground type keep
theirs); stripes are clipped to this shape.
- White marker tags behind the number and the cross reference, fitted
to the text and its alignment; black ribbed tags for isolating
(sectional) terminals.
- Clamping parts (screw in a window, castle tab, big center circle, tab,
screw) drawn in the free zone between the two tags, whatever the
layout; fewer parts if the zone is small.
- Remove the wire entry mark that overlapped the cross reference text.
- Draw only the terminal number (the part after the last ':') instead of
the full label (e.g. "1" instead of "XAUZ1:1"); the terminal manager
and tree still show the full label.
- Clip each text to the width of its terminal and shrink the font in
narrow terminals so that texts no longer overlap their neighbours.
- Remove the wire entry mark in the lower part of the terminal body,
which overlapped the cross reference text.
Add ElementData::TTResistor, TTVaristor, TTTestSocket and TTDiodeReversed
(xml values "resistor", "varistor", "test_socket", "diode_reversed"),
selectable in the element editor, the terminal strip editor and the free
terminal editor, and drawn in the terminal strip plan.
Add ElementData::TTAntiParallelDiodes (xml value "antiparallel_diodes"),
selectable in the element editor, the terminal strip editor and the free
terminal editor, and drawn in the terminal strip plan as two diodes wired
in opposite directions between the top and the bottom of the terminal.
The default terminal strip layout was rebuilt at every project load,
so the font size set in the layout editor was reset to 15 px.
Add TerminalStripLayoutPattern::toXml/fromXml and
TerminalStripLayoutsHandler::toXml/fromXml, write a
<terminal_strip_layout> element in QETProject::toXml() and read it
before the diagrams are loaded. Projects without it keep the defaults.
Every tr() source string in the code and the forms is now the English
text, and French is a translation (qet_fr.ts) like the other languages.
Generated, not hand-edited: master ef795a21e5 converted by
qet-en-source (harness 4c4ddc9).
3144 messages get an English source, 665 already had one, 0 left French; 8 shared-wording pairs disambiguated.
C++: 2904 literals in 233 files. Forms: 809 strings in 65 files. All 34 .ts files re-keyed; qet_fr.ts filled.
lupdate check: PASS. What each of 38 languages shows, old vs new: same 118266, English instead of French 38433, comment fallback 51, differences 0.
- Add missing <QHash> include: QHash<QUuid, QVector<QPointF>> was
only forward-declared transitively under Qt5's heavier headers;
Qt6's leaner <QPainter> etc. no longer pull it in.
- Replace QPolygonF{points_} with QPolygonF(points_): under Qt6,
QPolygonF inherits QList<QPointF>'s constructors via 'using
QList<QPointF>::QList;', including the std::initializer_list<T>
one. Brace-init-list construction with a single argument first
considers only initializer-list constructors before falling
back to regular ones, which trips up overload resolution here
even though points_ is exactly a QList<QPointF> (QVector is a
plain alias for QList under Qt6). Plain parenthesised
construction sidesteps that resolution phase entirely and binds
directly to QPolygonF(const QList<QPointF>&).
qAsConst was deprecated in Qt 6.6; std::as_const (C++17, already the
project standard) is the drop-in replacement. Clears 46 -Wdeprecated-
declarations warnings across 18 files. No behavioural change.
When user hover the Xref string of a terminal, the string color change
to blue to advise user the xref is clickable. Double click on the blue
Xref go the folio of the terminal and zoom the view to the terminal.
Add a new class TerminalStripLayoutPatternXml used to
save / load a TerminalStripLayoutPattern class into a xml.
Also create the namespace QETSVG used to read/write some
svg element / attribute to xml. This class is used by the
class TerminalStripLayoutPatternXml.
Initially it was planned to have separate text configuration for every
terminal level. It's not useful, use same properties for every level is
sufficient and visually more consistent.
By consequent every QVector related to these properties was replaced by
a single value.
The bounding rectangle used to define the position of the terminal text
can be edited. The y position and height can now be edited. The width is
not editable because is always the width of the rectangle of the of the
terminal.
clazy is a compiler plugin which allows clang to understand Qt
semantics. You get more than 50 Qt related compiler warnings, ranging
from unneeded memory allocations to misusage of API, including fix-its
for automatic refactoring.
https://invent.kde.org/sdk/clazy
Laurent Trinques