Holding Ctrl+Shift over a folio pans it, and only a key release seen by
the view ends that. A Ctrl+Shift shortcut that opens a window -- the
command search, Ctrl+Shift+M -- takes the keyboard before Ctrl and Shift
are released, so the view never sees the release. On Windows, where the
Shift press itself already reports Ctrl+Shift, the folio then stayed in
pan mode after a command was chosen: a hand cursor, and clicks ignored,
so a drawing tool picked from the search did nothing. On Linux the Enter
key's release happened to reach the view and end it.
The view now remembers that it pans because of Ctrl+Shift (not because
the hand tool was chosen) and stops when it loses the focus, or at a
click made without Ctrl+Shift, instead of waiting for a release it may
never get.
Reproduced on Linux by holding back Enter's release, as Windows does:
the line drawn after "Ctrl+Shift+M, une ligne, Enter" is not saved on
master and is with this change. Ctrl+Shift+drag and the hand tool still
pan (a dragged step does not move), as on master.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ajouter une ligne, un rectangle, une ellipse... had no ShortcutManager
id, so the command search could not list them. Give each one an id with
no default key; they can also be bound in the Shortcuts page now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ctrl+Shift+M (Édition → "Rechercher une commande…") opens a small
search box at the cursor listing every command of the diagram editor
window, as SolidWorks' "Search Commands" and the command palette of
many editors do. Typing narrows it, best match first: name starting
with the text, then a word starting with it, then containing it.
Matching ignores case, accents and mnemonic "&", so "editer" finds
"Éditer l'item sélectionné". Each row shows the command's key when it
has one, which also teaches the keys. Disabled commands are listed,
greyed, and cannot be run. Enter runs the highlighted one after
closing the box; Esc closes.
The list is ShortcutManager's registry, restricted to the actions this
window owns (ShortcutManager::action(id, owner)), so a second editor
window's commands never appear and nothing has to be listed by hand.
Ctrl+Shift+P, the usual key for this, is already the autonumbering
dock's.
tst_commandsearch covers the folding, the ranking, that another
window's commands are left out and that a disabled command does not
run; both behaviours were checked to fail the test when broken.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
BorderTitleBlock::draw() leaves the row header's room before the first
column even when the row header is hidden; insideBorderRect() does not,
so the top ruler was one header width out of line on such a folio. Take
the first cell's position from the header sizes, as draw() does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Affichage › "Afficher les limites des cases" draws a faint dashed line
at every column and row limit of the folio border, so that zoomed into
the middle of a folio you can see where a cell ends, not only which one
the headers name. Off by default, remembered once set
(diagrameditor/cell_lines).
Drawn by DiagramView::drawBackground(), under every item and only in
the view: printing and export render the Diagram, never the view, so
they cannot pick the lines up. PaletteGraphicsView gains scenePainter()
so a subclass can draw there on the inverted (dark palette) path too.
The lines follow the border's own cell positions, and each direction is
hidden when the folio hides that header.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Windows 11 style gives QPalette::Button a translucent colour
(#FFFFFFB3). The rulers filled their background with it, and since they
paint with WA_OpaquePaintEvent nothing clears them first: every zoom
step blended the new labels over the old ones, leaving a fading trail.
Fill with the button colour composed over the window colour instead,
which is always opaque.
Each ruler is now also hidden while the folio's own column (or row)
header is wholly in sight, so zoomed out only the folio's headers show,
not both. When a ruler comes or goes the drawing keeps its place on
screen: the ruler covers or uncovers the edge of the viewport.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since #983, projectDataBase::newQuery() checked a query with
sqlite3_prepare_v2() and sqlite3_stmt_readonly() on the handle of the
QSQLITE driver. Those calls go to the libsqlite3 QElectroTech links. The
QSQLITE plugin of the Qt online installer does not use that library: it
carries its own copy of SQLite, so the handle belongs to another library
and the call crashes. #1021 then put newQuery() on every element
selection, which is where #1045 hits it.
The check now runs the query with PRAGMA query_only set, through the
driver. SQLite refuses a write itself, before touching a row, so the CTE
prefix #983 closed ("WITH x AS (SELECT 1) DELETE FROM element") stays
closed. A refused or failed query comes back empty, because several
callers call exec() again on what newQuery() returns, after query_only
is off.
QElectroTech no longer calls the SQLite C API anywhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Right-clicking an empty folio offered Paste here, Folio properties and
four row/column actions. Four of six entries change the folio's layout,
which is rarely wanted and easy to hit by mistake, while nothing in the
menu helps draw.
The empty-folio menu now holds the "Ajouter" submenu (text, image,
shapes, terminal strip plan -- the same actions as the Edition menu and
toolbar), then Folio properties, then the row and column actions in a
"Lignes et colonnes" submenu. The selection menu is unchanged.
A submenu whose actions are all disabled is dropped, the same way
disabled actions already are.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
ElementTextsMover::endMovement() returned early when the text had not
moved without clearing m_movement_running, so every later
beginMovement() on that folio was refused. The dragged text still
moves, because it positions itself, but the mover no longer tracks the
drag and builds no undo step for it.
To reproduce: Shift+drag one element text a couple of pixels so it
snaps back where it was, then Shift+drag another text of the element
and press Ctrl+Z. The second text stays where it was dropped; with this
change it goes back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Drop 1:2.5: on a grid of 10 it steps by 4, which misses 10, so texts on
two elements 10 apart could never line up. Every remaining divisor is a
whole number, which tst_textgrid checks.
The divisor list and the snapping arithmetic move to the header-only
textgrid.h so the toolbar menu, the preferences page and the test share
them. The preferences page gets the same choice under Grille + Clavier;
QETApp::textGridChanged keeps every editor's toolbar button in step.
While element texts are dragged, the status bar names the text grid and
says to release Shift and hold Ctrl for free placement -- Ctrl+Shift
together is the pan shortcut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Texts snapped to the folio grid, so the first drag of an off-grid label
pulled it sideways by up to half a grid step (discussion #1020). Texts
now snap to a fraction of the folio grid, chosen from a "Textes 1:N"
button in the View toolbar and a menu under Affichage: Off, 1:1, 1:2,
1:2.5, 1:5, 1:10. Because the step divides the folio grid, texts on
different elements still line up. Ctrl still places a text freely.
1:1 is the default and matches the previous behaviour. The setting is
stored in QSettings; nothing changes in saved projects.
All five text movers switch together: element texts, text groups,
texts moved with a selection, conductor texts and independent texts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
The popup now also takes a folio position before the cell, the way
cross references and folio reports write it by default (%f-%l%c): 3-B13
offers "Folio 3 (<title>), case B13", and Enter shows that folio and
zooms onto the cell. Case and a leading "p" are ignored, and the
separator is optional: 3-b13, 3b13, P3B13 and p3-b13 all work. A plain
B13 still means the current folio, and P3 alone is still row P,
column 3: a folio always needs a cell after it. A folio position past
the last folio, or a cell outside that folio's border, offers nothing.
The zoom on another folio is queued, so it runs once the tab switch
has been handled. Checked on the ATS example: jumping to 1-C5 from
folio 3 gives the same view, pixel for pixel, as C5 typed on folio 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Affichage > "Garder les en-têtes visibles" adds a bar along the top and
the left of the diagram view that repeats the folio's column numbers and
row letters, aligned with the cells at any zoom, so they stay in sight
when the folio's own headers are scrolled away. Off by default; the
choice is stored as diagrameditor/cell_rulers.
The bars are CellRuler widgets in the view's margins
(setViewportMargins), not scene items, so printing and PDF/PNG/DXF
export never see them, and they paint with the application palette
outside of the dark-palette inversion. They keep a constant thickness;
when cells get narrower than their labels, only every 2nd, 5th, 10th...
label is written. A bar is hidden when the folio hides that header.
Showing or hiding them keeps the centre of the view where it was.
The labels come from BorderCellLabels, now also used by
BorderTitleBlock::draw(), so the bars and the border cannot disagree.
PNG export of all 133 folios of the examples is pixel-identical to
master, with border-columns_0 true and false.
Known limits: changing border-columns_0 repaints the bars at the next
scroll or zoom; the menu toggle updates the views of its own editor
window only, like the grid toggle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Typing a cell reference into the "Atteindre un élément" popup now offers
"Case B13"; Enter zooms the view onto that cell with one cell of margin.
The cell is read the way the border labels it: row letter(s) then column
number, honouring the "columns start at 0" setting and multi-letter rows
(AA, AB...). Cells outside the folio are not offered.
BorderTitleBlock::cellRect() is the reverse of convertPosition(); a
round trip over every cell of a 30x23 folio, under both column-numbering
settings, returned the same cell for all 1380.
When an element is labelled exactly like the cell (K1), the element stays
first so Enter keeps its old meaning; the cell is listed after it.
DiagramView::zoomToRect() re-centres from a queued call: zooming in makes
the scroll bars appear, and the viewport resize that follows is anchored
under the mouse (setResizeAnchor(AnchorUnderMouse)), which otherwise
scrolls the view away from the cell straight after the zoom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
On macOS, 3DxWare installs a driver extension that takes the 3D mouse
over. With it installed, HidBackend opens the device but receives
nothing, so the mouse did nothing in QElectroTech until 3DxWare was
uninstalled (discussion #599, PR #1028). Most Mac owners of a 3D mouse
have 3DxWare installed.
ConnexionBackend asks 3DxWare for the motion instead, through
3DconnexionClient.framework, as Blender does. SpaceMouseListener tries
it first. When 3DxWare is not installed, or is installed but its driver
is not running, it falls back to HidBackend, so the device works in
both setups. Take-over mode stops 3DxWare's own actions in QET, so the
view does not move twice.
The library is loaded at run time from where 3DxWare installs it:
nothing is linked or bundled, and the build needs no SDK. The few
declarations are written here, from Blender's
GHOST_NDOFManagerCocoa.mm, because 3Dconnexion's SDK headers may not be
redistributed. 3DxWare's axes are y up and z away from the user; they
are mapped to QET's raw USB convention by comparing Blender's 3DxWare
and spacenavd code paths.
The release script signs with the hardened runtime, which refuses a
library another team signed. misc/qelectrotech.entitlements adds
com.apple.security.cs.disable-library-validation (Blender's notarized
build carries the same one), and MacQetDeploy_arm64_cmake.sh now passes
it to all four signings of the app, including the re-sign inside the
DMG.
Tested: tst_spacemouseconnexion runs the backend on every platform
against fakeconnexion, a stand-in library that answers from its own
thread as 3DxWare does: registration, the axis mapping, buttons, other
clients' messages, 3DxWare not installed or not running, deletion
with a message in flight. Flipping an axis sign or dropping the client
check turns it red. realLibrary() loads the real framework when
3DxWare is installed. Linux Qt 6 build with the 3D mouse enabled: all
18 tests pass.
Not tested: on a Mac with a real device. The axis signs and whether
buttons arrive as a bitmask with current 3DxWare are unverified.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After a crash, QElectroTech offers to reopen its recovery files. If one
cannot be read, answering OK crashed the program instead of showing the
"could not open" warning: QETProject(KAutoSaveFile *) takes ownership of
the file and deletes it on failure, and openBackupFiles() then read the
file name from the deleted object to build the warning. Read the name
first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Both issues from the review, preview of empty contact comb slots only:
- Slice the flat label list over the declared poles in drawAsContacts
(terminals per pole from labels.size()/contactCount) instead of a
fixed stride of 2 (3 for a switch) inside drawContact: terminalCount
and contactCount are edited independently, so with 3 poles and the
default terminal count of 2 the fixed stride starved every pole but
the first. Available labels are now distributed across the poles.
- Map changeover labels of a slot to their own position always
(common=stored[0] right, NC=stored[1] bottom-left, NO=stored[2]
top-left, missing entries stay empty) instead of falling back to the
raw stored order, which put the numbers on the wrong contact halves
when the terminal count was below three.
- Element editor: changing the contact count now keeps the terminal
count in step (same terminals per contact, type default 2/3 for
inconsistent data, minimum 3 for a switch), so the mismatch cannot
be created anymore; legacy mismatched data is handled by the new
slicing.
- Drop the now redundant elmt check before is_power_ctc (it already
includes it) - the dead null check from the review.
Diagram::toXml() writes texts, images, shapes and tables in items()
order. The diagram scene uses NoIndex, and Qt's linear index sorts its
item list by pointer address the first time any item is removed from
the scene, which the editor does constantly (selection handles, for
one). From then on the order in the saved file follows memory
addresses, so moving one element reshuffles unrelated blocks and a
version-control diff of the project becomes unreadable.
Write those blocks in stacking order instead, read from a rect query,
which Qt sorts by z and insertion order even with NoIndex. Reloading a
file rebuilds exactly that order, so a resave is stable and the drawing
does not change. Elements and conductors were already sorted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Qt 6 declares the PDF/X namespace (pdfxid) in the XMP metadata of every
PDF it writes, even when the file is not PDF/X. Adobe Acrobat then draws
small text too bold at some zoom levels. Qt only needs the declaration
for PDF/X-4 output, which QElectroTech never asks for.
Blank the declaration out after export, in place with spaces so no
offsets move, in both the export window and the --export-pdf path.
Diagnosis and the Acrobat testing by Alf, bugtracker #340.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
hidapi's macOS backend opens every device with
kIOHIDOptionsTypeSeizeDevice unless told otherwise (hid_init() calls
hid_darwin_set_open_exclusive(1) for backward compatibility). When
3DxWare is running it already holds the SpacePilot/SpaceMouse, so the
seize fails, hid_open_path() returns NULL and HidBackend::scan() keeps
retrying every 3 s without ever finding the device.
Reported in discussion #599: a SpacePilot Pro (046d:c629) is listed by
hid_enumerate() and works in 3DxWare, but has no effect in QET's macOS
build. Enumeration never opens a device, so it did not exercise this.
Guarded on HID_API_VERSION >= 0.12, where the setter first appeared.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The root of a project's embedded collection showed "Projet sans titre"
whenever the project had no title, while the project panel shows the
file name. Fall back to the file name the same way, and only use
"Projet sans titre" for a project that has neither.
The name was also computed once, so changing the project title or saving
it under a new name left the pane stale until the collections were
reloaded. Update it on projectTitleChanged and projectFilePathChanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 3D mouse only worked on Linux, through spacenavd. This adds a second
backend that reads the device directly over USB through hidapi, with no
3Dconnexion driver or SDK: the route to Windows and macOS (discussion
#599), and usable on Linux without spacenavd.
SpaceMouseHid decodes the raw reports from the device's own report
descriptor -- where each axis and button sits, its range, absolute or
relative -- so no per-model table is needed, with the classic report
1/2/3 layout as a fallback when the descriptor cannot be read and the
0x1c button list newer devices send. Absolute axes are rescaled to
+-500 exactly as spacenavd does, so both backends give QET the same
values. HidBackend polls from the main thread (fast while moving, slow
when still), emits one sample per poll, and looks for a device every 3 s
so plugging one in or back in needs no restart.
QET_SPACEMOUSE_BACKEND (auto, spnav, hid) picks the backend; auto keeps
libspnav on Linux when it is found and uses hidapi otherwise. hidapi is
found through pkg-config as hidapi-hidraw (Linux) or hidapi (MSYS2,
Homebrew).
A sample arriving in the same millisecond as the previous one now counts
for no time instead of a full period, so a burst of queued samples no
longer moves the view further than the time it covers.
Tested without a device: tst_spacemousehid (descriptor parsing, broken
and hostile descriptors, every report form, recordings from real devices
once they are added to fixtures/spacemouse), and end to end on Linux
through a virtual USB device created with /dev/uhid: the same moves give
byte-identical screenshots through the hidapi and libspnav backends, an
absolute axis is rescaled as spacenavd does, buttons trigger their
bound action, and unplugging and replugging while QET runs (including
with a dialog open that a device button opened) reconnects cleanly.
Not tested on Windows, macOS or real hardware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 3D mouse's pan and zoom speeds were fixed guesses, and each sample
was applied as it came, so the speed on screen depended on how often
the driver sends samples -- different for every platform and device.
Motion now goes through SpaceMouseMotion::map(), which scales each
sample by the time since the previous one, and applies the user's
settings from a new "Mouvement" section of Configuration > Souris 3D:
pan and zoom speed, a dead zone, inverting each axis, and zooming by
push/pull (as before) or by twisting the cap. The defaults keep the
previous behaviour. Zoom is now exponential in the deflection, so the
factor stays positive however hard the cap is pulled (1 + z/1000 went
negative past z = -1000) and an equal push and pull cancel out. Sub-
pixel pan is carried over between samples instead of being rounded
away. The backend now reports all six axes.
tst_spacemousemotion covers the mapping without a device and is built
whether or not QET_ENABLE_SPACEMOUSE is on. The new behaviour was also
checked end to end with tools/spnav-shim (qelectrotech-docker): twist
with a dead zone of 10 ignores push/pull and small drift, and a twist of
60 gives the same frame as a push of 50 with the defaults.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 3D mouse only acted on the diagram editor: SpaceMouseListener
ignored every other window, so the element editor did not move at
all (reported by scorpio810 in PR #635 with a SpacePilot Pro).
applyMotion() now also handles a QETElementEditor, driving its
ElementView through the same scrollbar pan and a new
ElementView::zoom(factor), which keeps the wheel zoom's clamping.
The element editor's scene rect only covers what is on screen, so it
is grown before each pan sample, as its middle-button pan does;
without that the scrollbars have no range and the pan does nothing.
Verified under Xvfb with an LD_PRELOAD stand-in for libspnav feeding
recorded motion samples: element editor zooms 1.63x for ten z=50
samples and pans; diagram editor screenshots are byte-identical to
master's for the same input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each information field of the element properties now offers, as a
drop-down while typing, the values the other elements of the project
already carry for it: supplier, manufacturer, reference...
The values come from the project database's element_info table, not
from a walk over the folios. Spellings that differ only by case are
offered once, as most elements spell them, and the edited element's
own value is left out. The field key is checked against
elementInfoKeys() before it becomes part of the SQL text.
Browsing the list with live edit on applies each highlighted value,
as typing applies each keystroke; ChangeElementInformationCommand
merges them, so this still leaves one undo entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Call updateLabel() explicitly when the xref is created in itemChange for a master that must show its configured contact groups without slaves (same pattern as the PLC branch above).
- Register the hover/click hit rect of a contact independently of its position text again, as before this feature: only the drawing stays guarded by !str.isEmpty(), and the map insert is now keyed on elmt so free slots (nullptr) never enter the map.
- Revert is_power_ctc to the original element-type test (with a null guard): the Power-flag term was redundant for every caller that passes an element, so no linked contact changes classification.
- Clarify the label-order comment: single pole NO/NC are swapped, changeover labels are rotated per pole inside drawContact() (multi pole included), multi pole NO/NC groups keep the master order.
ispyisail