Reported by @scorpio810 on #626: "The field does not update automatically;
you need to list the other rules for it to update."
Two reasons, both mine:
The refresh was wired to the combo boxes' activated() signal, which Qt
emits only for user interaction. Nothing that changed a context
programmatically -- which is to say, numbering an element -- ever reached
it. Re-picking a rule from the combo was not a workaround so much as the
only code path that refreshed at all.
And there was no signal to hang it on for two of the three categories:
addElementAutoNum() emitted elementAutoNumAdded(), but addConductorAutoNum()
and addFolioAutoNum() emitted nothing, so even a listener would not have
heard a conductor counter advance.
Add QETProject::autoNumContextUpdated(), emitted by all three setters, and
have the dock re-read its three fields on it. Kept deliberately separate
from the existing *AutoNumAdded/*Removed signals: those make listeners
rebuild their rule lists, which is both heavier than needed here and would
disturb the user's current selection every time an element is numbered.
This one only says "re-read me".
The automatic refresh skips a field that has keyboard focus, so numbering
an element cannot overwrite a value half-typed under the cursor. Explicit
refreshes after a reset or an edit still write unconditionally, so the
field always ends up showing the canonical stored value.
Measured, advancing a counter the way numbering advances it and without
touching the combo box:
field before advance "5"
context after advance 6
field after advance "6" (was still "5")
Three new QUndoCommand subclasses (AddDiagramCommand, RemoveDiagramCommand,
MoveDiagramCommand) pushed onto the project's existing (already
project-scoped) undo stack, so folio structure edits are undoable
alongside every item-level edit already on that stack.
- QETProject::addDiagram()/detachDiagram() are the shared attach/detach
primitives: they mutate the diagram list, connect/disconnect the two
per-diagram signals set up at add time, and emit diagramAdded/
diagramRemoved. AddDiagramCommand and RemoveDiagramCommand call these
(via friend access) for both redo and undo, so a removed diagram is
parked rather than destroyed -- it's only actually deleted if the
command itself falls out of undo history while still detached.
- ProjectView reacts to diagramRemoved the same way it already reacted to
diagramAdded (tearing down/rebuilding the tab), so both directions of
both commands go through the same reactive path every other diagram
listener (project database, cross-references, generic panel) already
relies on.
- MoveDiagramCommand wraps a new ProjectView::setDiagramPosition(), which
performs the tab move and the project's diagramOrderChanged() list
reorder synchronously in one step, instead of relying on the queued
tabMoved connection (needed for interactive drag-and-drop) to catch up
later -- avoiding a second, redundant reorder from that queued call.
- Multi-folio delete and multi-folio move (QETDiagramEditor::removeDiagrams()
and the moveDiagram*(QList<Diagram*>) batch slots) wrap their per-diagram
loop in QUndoStack::beginMacro()/endMacro(), so a multi-select action is
one undo step, matching current UX.
- Softened the delete confirmation's "this change is irreversible" wording
now that it no longer is.
Verified headlessly (Xvfb + xdotool + scrot): add/undo/redo, delete/undo/
redo (single and multi-select, single undo step for the batch), and
move/undo/redo all behave correctly against a 7-folio project.
Adds a ProjectUsageTracker (sources/project/) that accumulates how
long a project has been the active tab, using QElapsedTimer so the
value is computed on demand rather than via polling. It's hosted on
ProjectPropertiesHandler per that class's own stated design intent
("all new properties should be managed by this class").
The accumulated time is persisted as a new <usage time_spent="N"
enabled="true|false"/> element, a sibling of <properties> in the
project XML, written/read by new QETProject::writeUsageXml()/
readUsageXml(). It rides along on the existing autosave path for
free, since writeBackup() already serializes the full project via
toXml().
QETDiagramEditor::subWindowActivated() now pauses every open
project's tracker except the one whose tab just became current, so
switching between several open projects keeps each project's tracked
time isolated.
Surfaced in the existing Project Properties "Général" page: a
"Temps passé sur ce projet" display, a "Réinitialiser" button, and
an opt-out checkbox ("uniquement enregistré localement dans ce
fichier" - this is local-only, never transmitted anywhere).
Verified beyond compiling: full CMake build, then an actual runtime
session confirming the saved XML's time_spent value, that closing
and reopening the project round-trips and resumes timing, that the
reset button works, and - the key correctness check - that with two
projects open, the inactive one's time_spent stays frozen while the
active one accumulates real elapsed time, over the same interval.
See discussion #576.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
QETProject::writeBackup() was Qt5-only: the Qt6 branch of the guard was
an empty placeholder, so on Qt6 no backup was ever written - a silent
data-loss risk (a crash loses everything since the last manual save),
found by ispyisail in qelectrotech#553.
The Qt5-style QtConcurrent::run(function, reference-args) call did not
survive the Qt6 API change; a lambda capturing the (implicitly shared)
document copy behaves identically on both, so the version guard goes
away entirely.
Verified at runtime on the Qt6/Windows build: opening a project creates
the autosave triple (.qetautosave + .lock + .path) with valid XML
content, and a clean exit removes it again. The CLI keeps backups
disabled via setBackupEnabled(false), unchanged.
(cherry picked from commit 0f65ae8c4b2782fbfe97111bc8b369cc105ec592)
Requested in #553 to compare Qt5 and Qt6 builds. QET already reports how
long the elements collection takes to load (ElementsCollectionWidget::
reload); this adds the equivalent for opening a project.
The phases are reported separately rather than as a single total. Reading
the XML and building the objects is mostly independent of the Qt version,
whereas refreshing the diagrams is graphics-scene work -- a single number
would mix the two and could suggest a Qt version makes no difference when
the part that changed is simply not where the time goes. Measured on the
example projects, XML parsing is 3-7% of the total and diagram
construction 77-83%, so the distinction matters in practice.
QETProject::openFile() reports the total with the parse/build split, and
readProjectXml() reports the build phases:
Project content built in 1.391 seconds (elements collection 0.009,
diagrams 1.153, terminal strips 0, refresh 0.196, database 0.033)
Project "example.qet" (3399 KiB) opened in 1.505 seconds
(xml parsing 0.11, content 1.395)
Logged with qInfo(), matching the existing collection timer, so it lands
in the normal log without a debug build.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
qAsConst was deprecated in Qt 6.6; std::as_const (C++17, already the
project standard) is the drop-in replacement. Clears 46 -Wdeprecated-
declarations warnings across 18 files. No behavioural change.
Provide a small KAutoSaveFile-compatible implementation for the no-KF5 build path and use it to keep the existing crash-recovery code active when BUILD_WITH_KF5=OFF.
The normal KF5 build still uses the KDE KAutoSaveFile implementation.
Assisted-by: pi coding agent / Mika (OpenAI GPT-5.5)
writeBackup() fires QtConcurrent::run(QET::writeToFile, ..., &m_backup_file)
fire-and-forget: the QFuture was discarded and nothing kept m_backup_file
alive until the worker finished. If the QETProject was destroyed first, the
worker wrote through the freed member -> use-after-free crash in
QET::writeToFile (intermittent; ~1/6 on short-lived CLI runs).
Store the QFuture and waitForFinished() in ~QETProject (and before
setFilePath() re-points the managed backup file). Also skip launching a new
backup while one is still running, so two threads never write m_backup_file
at once.
The Qt6 path is still a TODO stub and the QtConcurrent block is KF5-only, so
this affects only the Qt5/KF5 build that actually has the backup code.
Saving a read-only project to a writable location (e.g. Save As to /tmp)
left it marked read-only, so it stayed uneditable until closed and
reopened. Two issues in QETProject::write():
- The guard refused to write whenever QFileInfo(path).isWritable() was
false. For a Save As to a *new* file that test is always false (the file
doesn't exist yet), so it could wrongly block saving a read-only project
elsewhere. Now it checks the directory's writability for a new file.
- After a successful write the read-only flag was never cleared. Since the
file was just written, it is writable, so clear it (setReadOnly(false)
emits readOnlyChanged, re-enabling editing live).
Fixes#217.
QETProject schedules an asynchronous crash-recovery backup on construction
(writeBackup() -> QtConcurrent::run(QET::writeToFile, ..., &m_backup_file)).
In one-shot CLI mode the QETProject is destroyed as soon as the command
returns, while that background write still references its m_backup_file
member — an intermittent use-after-free segfault during teardown (~1 in 6
runs; observed on --resave and --set-titleblock).
A crash-recovery backup is meaningless for a short-lived headless command,
so add QETProject::setBackupEnabled(false), called from the CLI entry in
main(). writeBackup() then early-returns, so no background write is ever
launched. Fixes the crash for all CLI commands. See #492.
Modification of the int BACKUP_INTERVAL from 2 min to 20 min used by
KautoSaveFile.
On a large project with a 256 MB folio printed in A0 format, the
graphical interface freezes for 30 seconds when KautoSaveFile writes
this large amount of data to the disk every two minutes.
Even if the programme crashes, you only lose 20 minutes of your work,
which is not a big deal.
Thanks to Enzo for reporting it and finding the problem.
All export files that are derived from the project (BOM,
nomenclature, etc.) are saved in the same directory by default.
In this context, the standard directories have been grouped
together in qetapp.cpp / qetapp.h so that only one place needs
to be searched for in case of any adjustments.
TerminalStripLayoutPattern class is now a shared pointer between all
terminal strip item.
QETProject have now a new class : ProjectPropertiesHandler
the goal of this class is to manage every kind of properties used in the
project, this class will be strongly used in future.
* terminal_strip:
Terminal strip item can saved / loaded to .qet file
See previous commit...
Move terminal strip drawer class in is own file
Fix wrong use of QStringLiteral and QLatin1String
Double click a TerminalStripItem open the editor
Minor change about checkable QAction of QetDiagramEditor
Minor : corrects a minor aesthetic defect when unbridge terminals
Revamp code
Add and move terminal strip item are now managed by undo command
TerminalStripItem : Draw terminal bridge
Terminal strip item can be added to diagram
Minor : add QGIUtility namespace
ispyisail