Typing a cell reference into the "Atteindre un élément" popup now offers
"Case B13"; Enter zooms the view onto that cell with one cell of margin.
The cell is read the way the border labels it: row letter(s) then column
number, honouring the "columns start at 0" setting and multi-letter rows
(AA, AB...). Cells outside the folio are not offered.
BorderTitleBlock::cellRect() is the reverse of convertPosition(); a
round trip over every cell of a 30x23 folio, under both column-numbering
settings, returned the same cell for all 1380.
When an element is labelled exactly like the cell (K1), the element stays
first so Enter keeps its old meaning; the cell is listed after it.
DiagramView::zoomToRect() re-centres from a queued call: zooming in makes
the scroll bars appear, and the viewport resize that follows is anchored
under the mouse (setResizeAnchor(AnchorUnderMouse)), which otherwise
scrolls the view away from the cell straight after the zoom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Split from #913's second suggestion. There was no shortcut for the common
"duplicate with offset" convention; the nearest existing feature,
"Collage multiple", is a different workflow (a dialog for repeating a
paste in a grid pattern, not a one-shot duplicate).
Ctrl+D copies the selection and places it immediately, offset by a
configured spacing and direction -- no interactive follow-the-cursor
step, unlike Ctrl+V. The first press (or after the setting is explicitly
reopened) shows DuplicateOffsetDialog: spacing in grid steps, direction
up/down/left/right. Every later press reuses whatever was confirmed then,
silently, so a row of copies is one key held down and tapped, not a
dialog every time -- unattended, repeatable stamping is the actual point
of a duplicate shortcut, which a dialog or an interactive placement step
on every press would defeat. A separate "Configurer la duplication..."
entry reopens the dialog on demand to change the setting later. Cancel
leaves the diagram untouched -- verified, not assumed: qet_diff against
the saved file shows 0 added.
Chaining ("keep tapping to lay out a row") needs no special handling:
QET already reselects whatever a paste just added
(PasteDiagramCommand::redo()), so the next Ctrl+D naturally continues
from the copy just placed rather than the original.
The offset is applied by hand rather than by asking paste()/fromXml() to
place the copy at a target position. Both of those feed the position
through Diagram::snapToGrid(), which reads
QApplication::keyboardModifiers() and rounds to the nearest PIXEL instead
of the grid whenever Ctrl is held -- and Ctrl is always held here, this
action's own shortcut being Ctrl+D. Measured before settling on this:
routing the offset through paste() first produced copies off-grid on both
axes, by an amount that tracked the selection's own bounding-box geometry
rather than being a fixed error -- caught by qet-mcp's qet_elements
against the saved file, not by eye. fromXml() is instead called with no
position argument at all (leaves every item at its source coordinates,
landing the copy on top of the originals -- (0,0) is not a position, this
is "keep the source coordinates"), and the offset is added directly with
setPos(). A plain addition cannot be off by a rounding rule that never
runs.
Conductors are not in the hand-translated set: fromXml() itself does not
reposition them either -- they load after elements are already in their
final place and take their geometry from their terminals, which have
already moved with the elements that own them. Verified this holds: drew
a conductor by hand between two elements (drag, not click-click),
selected both, Ctrl+D, and the new conductor correctly joins the two new
elements via qet_conductors -- not the originals, not a mix.
Verified end-to-end on a built binary via qet-mcp, not by eye:
before L2 (303,207) L9 (512,196) -- deliberately off-grid
spacing=2, down (303,227) (512,216) -- +0,+20 exactly
same again, 2nd (303,247) (512,236) -- +0,+20 again, chained
Both elements land exactly the configured offset from their immediate
source regardless of the selection's own alignment. Qt 6.10.2, ctest
11/11.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The inverted painting, the rubber band replay and the changed()
receiver lived in DiagramView, which the unit tests cannot link, so the
update-flag regression was only covered through a stand-in view. They
now live in PaletteGraphicsView, a QGraphicsView subclass with no
other dependency, and DiagramView derives from it. The view tells a
subclass through paintingInverted(bool) when it renders for an
inverted display; DiagramView forwards that to the diagram. The grid
dot rule moves out of Diagram::drawBackground into
QET::Palette::gridDotColor().
tst_qetpalette now links the real class: gridDotColorSoftensInvertedDots,
paletteViewFollowsThePalette (light sheet, dark sheet at text contrast
with a red box still red and the paintingInverted calls in order, back
to light), paletteViewKeepsSceneUpdatesFlowing (three whole-scene
updates and a selection each repaint, scene set after construction),
paletteViewDrawsTheRubberBand.
On a dark palette the folio stayed a white sheet with black ink, and
the white/gray toggle only darkened the sheet while the ink stayed
black. DiagramView now renders each repaint into an image and inverts
its lightness before blitting it: white becomes the palette's Base,
black becomes its Text, and colored conductors and elements keep their
hue. The document, printing and export are untouched; only the screen
rendering changes, and only while the palette is dark.
QET::Palette::invertLightness does the inversion in one integer pass
(adding 255 - max - min to the three channels inverts the HSL lightness
and keeps hue and saturation), then stretches the result between the
sheet and ink colors through three lookup tables. A 4K viewport costs
about 9 ms in a release build. QGraphicsView::render() skips the
selection rubber band, so the view draws it again after the inversion.
Tests in tst_qetpalette: invertLightnessMapsSheetAndInk,
invertedViewReadsOnDarkSheet, invertLightnessSpeed.
Tab cycles the folio's items, which means focusNextPrevChild() has to
refuse the usual focus traversal. On its own that leaves someone working
without a mouse able to reach the drawing area and never leave it -- the
exact person the Tab cycling was added for.
Escape now steps back out in two stages: it drops the selection first,
then hands focus to the next widget. The one-shot m_releasing_focus flag
is what lets that second Escape through the override.
Verified under Xvfb: with an item selected, Escape clears it (193k pixels
change); a second Escape changes nothing visually; a Tab after that moves
widget focus in the toolbar (306 pixels) instead of selecting on the
canvas, which is the behaviour of a view that no longer holds focus.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Implements the second pillar of #574: keyboard-driven selection on the
diagram canvas.
Tab / Shift+Tab select the next / previous item on the current
diagram, cycling through items() (z-order) and wrapping at either
end. If nothing is selected, Tab selects the first item and
Shift+Tab the last. Skipped while a text item has focus, for the
same reason arrow-key movement already guards on !focusItem().
Candidates use the same "what counts as a real selectable diagram
item" filter (QetGraphicsItem / DiagramTextItem / Conductor) already
established by Diagram::invertSelection(), so the cycling order
always matches what a user could reach by clicking.
Getting Tab to actually reach the scene needed two separate fixes,
each independently discovered by empirical testing rather than
assumption:
- QWidget (DiagramView) intercepts Tab/Backtab for widget focus-chain
traversal before generating a key event at all. Overriding
DiagramView::focusNextPrevChild() to return false disables that.
- QGraphicsScene (Diagram) has its own, separate item-focus-chain
traversal, checked before keyPressEvent() is ever reached. The
obvious fix -- overriding Diagram::focusNextPrevChild() the same
way -- silently does nothing on Qt 5, because
QGraphicsScene::focusNextPrevChild() only becomes virtual in Qt 6
(guarded by the QT6_VIRTUAL macro); a compile error surfaced this
immediately when attempted directly, rather than shipping a fix
that worked on Qt 6 and silently no-opped on Qt 5. Intercepting
QEvent::KeyPress in Diagram::event() instead is virtual on every Qt
version and sidesteps the scene's internal traversal entirely.
Also adds Diagram::selectAllConductors() / selectAllTextFields(),
wired up as two new actions in the existing select_all /
select_nothing / select_invert action group in
qetdiagrameditor.cpp, so they appear in the Edit menu and go through
the same QAction -> data() -> selectGroupTriggered() dispatch as the
existing selection commands.
Verified end-to-end in a real running session (Xvfb + xdotool) with
a multi-transistor schematic: Tab/Shift+Tab correctly move a single
selection forward/backward through elements and text fields
(confirmed via the properties panel updating to each new item and
the visual selection box moving on canvas); Tab/Shift+Tab from no
selection correctly select the first/last item; "Select all
conductors" and "Select all text fields" each correctly select every
matching item and deselect everything else.
See discussion #574.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
DiagramView::zoom() had the same unbounded scale() as the element editor:
a held scroll-wheel zoom could overflow the view transform. Clamp the
resulting scale to [m_min_zoom, m_max_zoom] before applying it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HdWpDp3TrPKbHnv7YUcNJj
Before this commit :
ElementPropertiesWidget emit a signal of Diagram to edit an element, and
the signal goes up from Diagram -> DiagramView -> ProjectView ->
QetDiagramEditor and QetDiagramEditor call a static function.
Now :
ElementPropertiesWidget call the static function itself and that all.
All unnecessary signals are removed.
At time of closing project, if a master element(may be every linkable
element) is selected and the editor dock display a lot of available
slave, qet crash.
Use like normal selection + hold the ctrl key.
The code made in this commit are largely inspired by the the rubber band of QGraphicsView.
git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@5716 bfdf4180-ca20-0410-9c96-a3a8aa849046
The keybord shortcut for texts group alignment change. Now it's ctrl + arrow-left/up/right
git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@5141 bfdf4180-ca20-0410-9c96-a3a8aa849046
The check box for this functionality in the DiagramProporties window was deleted.
git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@4022 bfdf4180-ca20-0410-9c96-a3a8aa849046
ispyisail