The previous commit changed only the bar that appears beside the
cursor after a click. The S shortcut bar builds its own tooltips, so
its "Orienter les textes" button still said only that. Its tooltips
now carry the status tip on a second line as well, after the keyboard
shortcut.
Checked in the GUI: the S bar's second button shows "Orienter les
textes (Ctrl+Space)" over "Pivote les textes sélectionnés à un angle
précis".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1051 replaced the filtered tree with a ranked flat list. A new checkbox
in Settings > General, "Afficher les résultats de recherche sous forme de
liste triée" (elementscollection/search-flat-list, default on), keeps the
ranked list; unticked restores the pre-#1051 filtered tree search.
The Insert picker and shortcut bar call rankedSearch() directly and are
unaffected. Down/Enter from the search field only apply to the flat list.
Requested by scorpio810 on #1051.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
After customising, the bar now opens at the cursor like every other
time, instead of where the customising window was.
A size grip in the bar's corner sets its width. The tiles are laid out
in rows that wrap at that width, so a bar with many commands and pinned
elements becomes a block rather than one long strip; the height follows
the rows, and the width is saved. Until the user sets one, the tiles
stay on one row, as before. The grip is driven by hand: QSizeGrip asks
the window manager to resize, and on X11 a popup is not managed, so
nothing would happen. The hint line wraps rather than being cut off at
narrow widths.
The customising window remembers the size it was left at.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The bar's customising window gets an element search next to the command
list. Type part of a name, then drag a hit onto the bar, double-click
it, or press Enter to pin the best one. A pinned element shows as its
icon among the commands, and clicking it places the element, as the
picker does.
Pinned elements are saved in the same list as the commands, by
collection path (common://, custom://, company://), so the row keeps
the user's order. Elements embedded in a project are not offered: their
path names the project as loaded now. Elements are offered for the
empty-folio bar only; with something selected the bar is for acting on
it. Once any element is pinned there, the palette folder grid under the
bar is hidden, and comes back while typing a search.
Dragging a pinned element off the bar onto the commands, or a double
click, removes it. The Preferences page shows pinned elements by name
and icon, and removing one there drops it instead of listing it as a
command. The customising window is now kept on screen, since it is
taller than before.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While a collection search is active the tree is replaced by the flat
ranked list, and that list had no drag support: dragging a result only
moved the selection. Anyone used to searching and then dragging lost the
drag as soon as they typed.
The tree's drag is moved into a static ElementsTreeView::execElementDrag()
taking the source widget, and the results list uses it from the path each
row already carries, so the drag content and pixmap are the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Right-click the shortcut bar, or click the "…" button at its end, and it
turns into a small window holding two lists: the bar's commands, left
to right, and every other command. Drag a command onto the bar, off
it, or to another place on it; a double click moves it to the other
list. Terminé saves and shows the bar again where it was, with the
result; Annuler, Esc or closing the window leaves it as it was.
"Valeurs par défaut" puts back the defaults for this context.
A Qt::Popup closes on a press outside it and holds the mouse grab, so
the bar is re-shown as a Qt::Tool window for the time of the edit.
Only QSettings is written, through ShortcutBarSettings, never the
project's undo stack.
The popup now looks the commands up itself (popUpShortcutBar(pos,
context)) instead of being handed actions, since it has to rebuild
them after an edit. ShortcutBarSettings::availableIds() lists what can
go on the bar, shared with the configuration page. An empty bar still
shows its "…" button, so it can be filled again.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 4145d4bec1d403126b2a6587105aea47092db8a2)
Pressing S on a folio opens the element picker at the cursor with a row
of commands above it, chosen by what is selected, like the SolidWorks
shortcut bar:
nothing selected insert last element, element picker, text, line,
rectangle, terminal strip plan, paste, folio
properties
elements selected rotate, rotate texts, edit, copy, cut, delete
only conductors reset path, edit, delete
Each row is a list of ShortcutManager ids, so any registered command can
go on it and the bar carries no command list of its own. The lists are
in QSettings (diagrameditor/shortcut_bar/<context>); a context the user
has not changed follows the defaults. A disabled command keeps its
place, greyed, so a row looks the same each time. Clicking a button
closes the bar and triggers the action.
A new configuration page, "Barre de raccourcis", edits the three lists:
add, remove and reorder any diagram editor command.
To make that possible:
- ShortcutManager::action(id, owner) returns the action a given window
registered under an id, since each editor window registers its own.
- The add-item actions (text, image, shapes, terminal strip plan) are
registered as diagrameditor.add_<kind>, with no default key. They also
appear in the Shortcuts page and can now be bound.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 53c1e213282b9f7226ca1c09e81703113236bb88)
Insert opens a small picker where the mouse is, with its search field
focused. Type to search the whole collection, Enter to place the best
hit (it is preselected), Up/Down to choose another, Esc to close. The
chosen element goes into the usual placement mode, so it can be placed
several times and repeated with A.
With the field empty the picker shows a palette: the elements of a
folder, as an icon grid. The palette is a folder rather than a setting
or a file format. Subfolders are read in, the 01_/02_ filename prefixes
the shipped collection already uses give the order, and sharing it is
putting it in the company collection. Only the path is stored,
"elementscollection/palette-path", defaulting to the user collection.
It is read each time the picker opens, capped at 60 entries and three
folder levels.
The picker builds no second collection model. It asks the Collections
panel's rankedSearch(), so both give the same results in the same order
and startup is unchanged.
"Insérer un élément…" is in the Édition menu, registered with
ShortcutManager on Insert, which nothing else uses, and disabled with no
folio open or on a read-only project.
Discussion #676.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 01e1e0303b96380e710da8d4bb2300b21d01e938)
The Collections search hid non-matching rows, so the hits stayed spread
through the expanded folders. Searching "diode" against the shipped
collection left five levels of tree open, and the first visible hit was
"Avalanche diode bidirectional".
The same matches are now shown as a flat list that takes the tree's
place while a search is active, best match first:
exact name 1000
name starts with 800
name contains 600, less the match position
info field only 300
less the name length, so "Diode" precedes "Diode Zener bidirectional"
"diode" now gives Diode, diode-tube, Diode bridge, Diodes Module Pilot
Wire, Photodiode. No new index: this ranks what match() already returns
against Qt::UserRole+1, the string built at startup from the name and
every element-info field. An element matching several "+" terms is
listed once, and each row's tooltip is its folder, so similar names can
be told apart.
Double click or Enter on a result places it, as in the tree. Down from
the search field moves into the results, so searching and placing needs
no mouse. Emptying the field brings the tree back.
The query and ranking live in rankedSearch(), which returns hits without
model indexes, so another list can reuse them.
Discussion #676.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 3d6a280f9608758527ef0ca2de7223a19dfbfa45)
DiagramEventAddElement is already a good placement mode: the element
follows the cursor on the grid, a left click drops it, Space rotates it,
and it stays loaded for a run of the same symbol. Its only caller was
DiagramView::handleElementDrop(), so it could be reached only by
finishing a drag. Double-clicking a symbol in the Collections dock
opened the element editor instead.
- DiagramView::startElementPlacement() is split out of
handleElementDrop(). defaultPlacementPos() uses the cursor when it is
over the view and the centre of the visible area otherwise.
- ElementsCollectionWidget emits insertElementRequested() on double
click, or Enter on the highlighted item. The host decides which view
receives it, so the widget can later be reused outside the editor.
- When there is nowhere to place it (no folio open, read-only project),
the element editor opens, as a double click did before.
- "Insérer le dernier élément" (Édition menu, default key A) places the
last element again. DiagramView reports every placement it starts, so
an element dropped by drag counts too. Macros are not remembered.
A rather than Space: Space rotates the pending element inside placement
mode and is bound three more times in this editor. The key is a
ShortcutManager default and can be changed in the Shortcuts page.
Double click placing is a behaviour change, so it has a preference,
"elementscollection/double-click-inserts" (default true), shown in
Configuration as an opt-out: "Double-cliquer dans la collection ouvre
l'éditeur d'élément au lieu de l'insérer".
Discussions #676 and #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
The root of a project's embedded collection showed "Projet sans titre"
whenever the project had no title, while the project panel shows the
file name. Fall back to the file name the same way, and only use
"Projet sans titre" for a project that has neither.
The name was also computed once, so changing the project title or saving
it under a new name left the pane stale until the collections were
reloaded. Update it on projectTitleChanged and projectFilePathChanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
sources/ElementsCollection/fileelementcollectionitem.cpp had a German
tr() source string ("Makros") in a project whose source language is
French/English elsewhere. Renamed to "Macros" (identical in both
languages, so no translation catalog change is needed). Translated
three German-language comments in elementscollectionmodel.cpp and
diagramview.cpp to English.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Reviving #713, closed 2026-09-21 purely to clear a maintainer review
backlog (#630), not on merit; not superseded. The crash #713 was
originally named after (bugtracker #291) was already fixed separately
by 39ac5716c, merged 14 Aug -- confirmed still on master. What's left,
and what this revives, is the one-line follow-up #713 itself narrowed
to after that: m_future.cancel() before the wait.
Without it, ~ElementsCollectionModel()'s wait runs the whole queued
QtConcurrent::map() to completion, so cancelling the open-element
dialog blocks until every remaining item has been processed -- a
visible hang on the button pressed precisely to stop the work.
cancel() drops the not-yet-started items so the wait is short, while
still waiting for whatever item is already in flight (needed so it
can't dereference this object after it's gone).
Qt 6.10.2, ctest 13/13. The responsiveness gain itself is reasoned
from QFuture's documented cancel()/waitForFinished() semantics rather
than timed -- same as the original PR's own stated verification.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Both panels forced a light palette on themselves (white rows, black
text, their own selection blue) so that element previews, which are
black line art drawn for the white sheet, would stay visible on a dark
desktop (bugtracker 335). On a dark palette the two docks were the
only white windows left.
The forced palettes are gone. Element previews are now kept as drawn,
on a transparent background, and adapted where they are shown:
ElementPreviewDelegate, installed on the collection tree, hands the
view a copy with its lightness inverted when the palette is dark
(QET::Palette::forPalette), so black ink becomes the palette's light
gray while colored icons such as folders stay as they are; the drag
pixmap is adapted the same way. A light palette shows the previews
untouched. This fixes bugtracker 335 on every dark desktop rather than
masking it with a white panel.
The preview cache stored the old white-sheet pictures; it records the
format now and drops a cache written before this change once. The
amber "show this directory" highlight sets black text so it reads on
both palettes. The Projects panel only shows icons from the icon
theme, which has a dark variant, so nothing else changes there.
tests/qttest/tst_qetpalette: the line-art rule tells ink from color;
inversion keeps hue and alpha; a preview reads at 3:1 on the Base
color of both palettes; in a tree on the dark palette the delegate
inverts a line-art icon and leaves a colored one alone.
Fixes#945.
QET had no icon theme: the 446 entries of the icon table and the 116
iconsets in .ui files each named a resource path, so an icon could only
ever be one file, and a variant for another palette or a vector source
had nowhere to go (GitHub #466, #690, #870). This adds the theme layout
without changing a single pixel; a dark variant comes in a follow-up.
The theme "qet" follows the freedesktop layout Qt's icon loader
understands. misc/make_icon_themes.py generates ico/icon-themes.qrc,
which aliases the existing ico/<size>/<name>.png files into
themes/qet/<size>/<name>.png, and ico/themes/qet/index.theme. No file
moves. The four table entries that paired a 16 pixel file with a 22
pixel file of another name (ConductorSettings, DiagramAdd,
DiagramDelete, DialogInformation) get the 22 pixel file aliased under
the 16 pixel name.
QETApp::initIconTheme() registers the theme before initIcons() and makes
it current on every platform, so a desktop icon theme cannot replace
QET's icons. Icons are then looked up by name: QIcon::fromTheme() in
qeticons.cpp and in the few places that built a QIcon from a resource
path directly, and theme="..." on the iconsets in .ui files, with the
resource path kept as fallback. Flags, color swatches, application and
MIME icons stay on their paths.
One entry does not go through the theme. The elements panel draws the
project root with ProjectFileGP in the 50 pixel slot it reserves for
element previews, and the name "project" also carries the 128 pixel
file the configuration dialog uses. On a 2x display Qt's loader picks
that file for a 50 pixel request and fills the slot. ProjectFileGP
loads the 16 and 22 pixel files directly, as before.
tests/qttest/tst_qeticons: every name in the theme resolves, the four
aliases resolve at 22 pixels, a Fusion tool button shows its icon at
3:1 with disabled weaker than enabled, and the project root icon stays
at 22 pixels or less when asked for 50 at 2x while the configuration
dialog still gets its 128 pixel file. The rendering helpers shared
with tst_qetpalette moved to tests/qttest/inkcontrast.h.
Another exception: one non-converted code path in projectprintwindow.cpp to be followed-up.
One issue found in the Qt6 code path of diagramview.cpp which has been fixed.
Bugtracker #291: clicking Cancel on the open/save-element dialog before
the user collection finishes loading crashes the whole application with
an unhandled pointer exception.
ElementsCollectionModel::loadCollections() loads collections in the
background via QtConcurrent::map(m_items_list_to_setUp, setUpData) -
worker threads call setUpData() on each ElementCollectionItem
(a QStandardItem), which does setFlags()/setData() on it.
ElementDialog::execConfiguredDialog() deletes the dialog immediately
after exec() returns:
element_dialog->exec();
...
delete element_dialog;
That destroys the tree view and its ElementsCollectionModel, which as
a QStandardItemModel frees all its items in its destructor. Nothing
waited for the QtConcurrent::map() to finish first, so on Cancel before
loading completes, background threads were still calling setUpData()
on items the main thread had just freed - a use-after-free race.
Add an ElementsCollectionModel destructor that waits for the future
before QStandardItemModel's destructor runs. QFuture::waitForFinished()
on a default-constructed (never-started) future returns immediately, so
this is a no-op whenever loading already completed - the crash path is
the only one affected.
The unconditional early return was narrowed to non-directories only, so
that the just-added warning badge could be picked up once setUpData()
resolved m_qet_directory_unreadable asynchronously. But every directory
then called setIcon() on every single data(Qt::DecorationRole) query --
not just once -- and QStandardItem::setIcon() -> setData() emits
dataChanged() unconditionally (QIcon has no equality check to suppress
it). QTreeView handles dataChanged() by recomputing the row's size hint,
which re-enters data() for the same index, calling setIcon() again:
unbounded mutual recursion, confirmed by an isolated reproduction to
overflow the stack in a single frame (100k+ frames) well before the
first paint completes. Matches plc-user's report of a segfault right as
the elements tree begins drawing.
The race the guard was widened for doesn't actually occur:
ElementsCollectionModel only attaches itself to the tree view (the only
way data() becomes reachable) from loadingFinished(), which fires after
the QtConcurrent::map over every item -- this one included -- has
already finished. m_qet_directory_unreadable is therefore always final
before setUpIcon() can run for the first time, so the plain, always-only-
once guard is sufficient and the badge still works correctly.
@plc-user asked (review on #633) for a way to see a broken folder
directly in the tree instead of only on tooltip hover, originally
suggesting a "FixMe: " text prefix on the displayed name. That name is
reused verbatim in dialog titles and status-bar messages elsewhere
(elementscollectionwidget.cpp), so baking a prefix into it would leak
into those too. An icon badge gets the same visibility without
touching the name value.
setUpIcon() overlays a small warning glyph on the folder icon when
m_qet_directory_unreadable is set. Also drop the "already has an icon,
skip" guard for directories specifically: that flag is only known once
the async setUpData()/localName() job completes (QtConcurrent::map), so
without this a directory painted before that finished would have its
plain folder icon cached forever and never pick up the badge.
Fixes https://qelectrotech.org/bugtracker/view.php?id=332
localName() set a non-root folder's label only inside the success path of
loading its qet_directory file. If that load failed -- file missing,
malformed, or unopenable because of the Windows path-encoding problem with
accented characters that plc-user diagnosed on the tracker -- nothing was
set at all, and since a fresh item's text() is null the folder rendered
with a completely blank label. That is the reported symptom.
Resolve the name into a local and always fall back to the folder's own
directory name, so the label is never empty whatever went wrong.
The fallback is applied *after* NamesList::name() rather than passed into
it. This matters: name() returns a caller-supplied fallback before it
reaches its "first available translation" step, so passing m_path in would
replace a perfectly good name in some other language with the raw
directory name. A folder named only in French, viewed under an English
locale, previously showed "Accentué" and must keep doing so.
Falling back on its own would then hide the broken file -- the user sees a
plausible name and never learns there is anything to repair. So a folder
whose qet_directory could not be read now says so in its tooltip, naming
the file, above the collection path that tooltip already carried.
Suggested by plc-user on PR #622. The flag is recorded in localName() and
consumed in setUpData(), because setUpData() assigns the tooltip after
localName() runs and would otherwise discard it.
Only a file-level failure is flagged. A readable qet-directory with no
entry for the current language is not an error; NamesList::name() resolves
that itself and no warning is shown.
Verified on a fixture collection of four folders -- valid, malformed,
missing, and one named only in French:
master this patch
fr-only Accentué Accentué (no warning)
malformed <blank> malformed (warning)
no qet_directory <blank> no_file (warning)
valid Valid Folder Valid Folder (no warning)
ElementsPanel and ElementsTreeView already force a fixed light palette
(white base, black text) on themselves, specifically because element
icons are rendered with colors read directly from each .elmt file --
almost always black linework, matching printed-schematic convention --
onto a transparent background. That only stays legible if the row
background is reliably light, regardless of the OS/desktop theme.
But QAbstractItemView paints row backgrounds using its viewport's
palette, not the view widget's own palette. setPalette() on the view
itself doesn't propagate to viewport() in the general case, so under
styles that actually respect the viewport's (unset, therefore
theme-inherited) palette -- e.g. KDE Plasma's Breeze Dark -- the row
background falls through to the app's dark palette while the element
linework is still literal black, making library icons and terminal
symbols invisible.
Apply the same QPalette to viewport() right after setPalette() in both
constructors, so the fix these two classes already clearly intended
actually takes effect under every style.
Fixes https://qelectrotech.org/bugtracker/view.php?id=335
The element tooltip showed only the collection path - the least useful
string exactly when a long descriptive name is truncated in the tree
(qelectrotech#552). Show instead: localized name, description,
manufacturer and manufacturer reference (each only when set), with the
collection path kept as the last line. Directories and .qetmak entries
keep the plain path tooltip.
Reuses the location/context already parsed right above for the search
index, so no additional file access or parsing.
GUI-verified on a library where every element carries these fields:
hovering an element now shows e.g. name, "Hutschienennetzteil
85-264VAC auf 24VDC, 92W, Schutzklasse II", manufacturer, order number
and path on five lines.
The child lookup iterated parent_element.childNodes() via item(i), and
QDomNodeList::item() walks the sibling chain from the start on every
call - making the loop quadratic in the number of children, with an
extra QList allocation and a second pass on top. This lookup runs
several times per element instance while loading a project, against the
"import" category that holds every embedded definition, so the cost
scales with (instances x embedded definitions).
Replace it with a firstChildElement()/nextSiblingElement() walk with an
early return. Same semantics (first tag+name match in document order).
Measured on the Kaefer_1303 reference project (3.9 MB, 23 folios,
432 instances, media of 6 runs, Windows/MinGW, same GCC for both):
before after
Qt5 5.116 s 5.068 s
Qt6 6.683 s 4.640 s (-31 %)
This removes the entire Qt6 load-time regression discussed in #553 -
Qt6 goes from +31 % slower to 8 % faster than Qt5 on the very project
that exposed it (Qt6''s QDom makes the quadratic pattern much more
expensive than Qt5''s did). Smaller projects gain too (3.4 MB example:
-9 % on Qt6).
(cherry picked from commit 0d4ef8eca27601c37ba2b75d7c058e9d8e2beea4)
Shows the licensing/liability warning text agreed on in PR #513
(scorpio810) before the file picker opens. Import stays disabled
until the "I have read and accept these terms" checkbox is ticked.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The name of the elements and folders of the collection are not displayed
until we hover the item with the mouse.
This due that QtConcurent::run was disabled at loading of collection in
the goal of use QtConcurrent::run with Qt6.
Run is made to run a function once.
Map is made to run a fonction for each item of a sequence (what we need
in this case).
Remove code of run and re-enable code for map.
The Qt6 branch of the #if QT_VERSION guard swapped QRegExp for
QRegularExpression but kept calling QRegExp-only methods
(exactMatch()/cap()), which QRegularExpression doesn't have.
Use the correct QRegularExpression API instead: match() returns
a QRegularExpressionMatch, tested with hasMatch() and read with
captured(n).
Three deprecated APIs have replacements that only exist in newer Qt6:
- QLocale::nativeCountryName() -> nativeTerritoryName() (Qt 6.2)
- QDomDocument::setContent() overload -> ParseResult (Qt 6.5)
- qt_ntfs_permission_lookup -> QNtfsPermissionCheckGuard RAII (Qt 6.6)
Each is wrapped in QT_VERSION_CHECK so Qt5 keeps the old path. Clears
4 -Wdeprecated-declarations warnings.
QString::count() (no-arg) is deprecated -> size(); QColor::setNamedColor()
is deprecated -> the QColor(QString) constructor. Both replacements are
non-deprecated on Qt5 too. Clears 2 -Wdeprecated-declarations warnings.
pugi::xml_document::load_file(const char*) calls fopen/fopen_s on Windows,
which uses the ANSI codepage — not UTF-8. This silently fails when the
collection path contains accented characters (é, ü, ñ, …) or is longer
than the narrow-API MAX_PATH limit, leaving the collection panel with no
element names or illustrations.
Switch both call sites to toStdWString().c_str() which invokes the
load_file(const wchar_t*) overload. On Windows pugixml calls _wfopen,
the wide Unicode API that handles all valid Unicode paths. On Linux/macOS
the same overload converts wchar_t to UTF-8 internally and calls fopen,
so behaviour is unchanged on those platforms.
Affected files:
sources/ElementsCollection/fileelementcollectionitem.cpp (qet_directory load)
sources/ElementsCollection/elementslocation.cpp (element .elmt load, both branches)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Resolve cmake/qet_compilation_vars.cmake conflict: keep both upstream's
cli_export.cpp/h and pdf_links.cpp/h and the EDZ source additions.
- 10-position grid alignment: pin_y values are multiples of 10 so terminals
snap cleanly to QET's default grid. group_gap raised to 10 (one full slot).
- Named connector groups get a header label (group name) placed in the gap
above the first pin, so the electrician sees block names (XDI, XPOW, …)
without reading individual terminal designations.
- Device-tag dynamic_text now uses 9pt LABEL_FONT and y = min_y - 9 so it
clears the element body and is legible at normal zoom.
- Add EPLAN Data Portal Terms of Use disclaimer to sources/import/edz/README.md.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The default user-collection path ends in "elements" and the default
company-collection path ends in "elements-company". Both
FileElementCollectionItem::isCustomCollection() and
ElementsLocation::isCustomCollection() used startsWith(customDir),
so "…/elements-company/…" matched "…/elements" and returned true.
This caused ElementsCollectionModel::addLocation() to insert a
newly-saved user-collection element as a child of the company-
collection branch in the tree, making it appear in the wrong panel.
Fix: require the path to equal the directory root exactly, or to
start with the directory root followed by '/'.
path == dir || path.startsWith(dir + QLatin1Char('/'))
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Wires EPLAN .edz import into the elements panel. EdzImporter orchestrates
EdzArchive -> EdzPart -> EdzElementBuilder and writes the generated .elmt into a
destination collection folder (named by order number). A right-click
"Importer une piece EPLAN (.edz)..." action on a writable collection directory
opens a file picker, runs the importer into that folder's fileSystemPath() and
reloads the panel; errors surface via QetMessageBox. Modeled on newElement().
EdzImporter verified headless against the Python oracle for KG6000/MFH200/
R1D200; the panel wiring is built/tested via the WSL Qt5+KF5 build.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Per review (plc-user): scope the reset to items currently painted with the
red Dense4Pattern instead of clearing every item's background. This avoids
clobbering other backgrounds (e.g. the amber "show this dir" highlight)
and skips needless item updates on large collections.
ElementsCollectionModel::highlightUnusedElement() only ever painted the
currently-unused elements red; it never cleared the background of items
that were no longer unused. So when an element was re-added to a project
and saved, its red 'unused' highlight persisted until the model was
rebuilt from scratch.
Reset every item's background before re-applying the highlight to the
current unused set.
Laurent Trinques