English has been the source language of the program for a while now
(upstream: "Make English the source language ..."), the cable feature
came in with French ones: about 200 translatable strings over 30 files,
the two settings pages built from .ui files, four comments and one test
which asserted the old wording (blocking review comment by ispyisail).
The wording follows what the code base already uses where it exists:
Plant (=) and Location (+) as qetinformation.cpp names those element
information, Designation for the field the cable form calls its BMK,
Length, Sheet for folio, Automatic numbering, Cross-reference, and Right
aligned / Centred / Left aligned the way cabletextformatdialog.cpp
already spells the three alignment entries.
Two things are more than a word-for-word swap:
- xrefpropertieswidget.cpp:291 wrote the label of the master field on
every type change with a hardcoded tr("Maitre"), so the English
"Master" coming from the .ui was overwritten for every type, cable or
not: a real bug next to being French. The wording now comes back from
the .ui and only a cable renames the field to "Text:", so the two
cannot drift apart again.
- tst_cabletypelist kept asserting that a new catalogue is *labelled*
in French. That label line is the translated header and reads English
now. The test still reads files with French headers on purpose:
headerAliasMap() keeps the five old French labels as aliases next to
the English ones, so catalogues written by earlier builds, including
the one the reviewer reads her own types from, keep loading.
The .ts files are deliberately not regenerated here. Upstream
regenerates them on master, as it did for the language change itself,
and a translation is keyed on the source string: while the sources were
French a German user saw French in the cable dialogs, and an English
source string with no translation yet shows as it is.
Build clean, ctest 92/93, the one failure being the pre-existing
headless tst_menubarkeyboard.
Upstream moved 56 commits ahead of the last merge. Six files conflicted,
all of them files where upstream's French -> English tr() translation wave
touched lines we had also touched with the cable feature. Resolution rule
applied everywhere: take upstream's English source strings, keep our cable
additions.
Resolved:
- sources/ui/xrefpropertieswidget.ui : kept our structure (m_labels_gb
pulled out of the display group, m_slave_row, the m_font_pb "Police..."
button of the cable cross-reference) and mechanically applied upstream's
20 English string replacements on top of it.
- sources/ui/xrefpropertieswidget.cpp : our version plus upstream's 7
translated combo entries; the tr("Cable") item we add for the cable
cross-reference type stays.
- sources/autoNum/ui/numparteditorw.cpp : upstream's English part names
("number format 1", "Sheet no.", "Plant", "Location", ...) for the
number-format list, with our comment explaining why type 3 (cable) takes
the conductor kinds of variable.
- sources/ui/configpage/configpages.cpp : upstream's English tab titles
(Conductors / Elements / Sheets) plus our Cables tab.
- sources/ui/configpage/projectconfigpages.cpp : upstream's "Sheets" tab
title plus our Cables tab block (single-rule SelectAutonumW(3)).
- sources/qetdiagrameditor.cpp : union of both sides - upstream's new
"Add a generic device" action (icon, status tip, data id) and its
English menu names ("File"/"Edit"/"Project"/"Display"), together with our
cable action, the Numbering and Lists menus, the cable list actions and
the CSV export in the Project menu.
Kept French: our own cable tr() source strings stay French for now. That
is the smaller change and the translation pass can follow separately.
Verified: full build 1065/1065, ctest 91/92 (only the pre-existing
headless tst_menubarkeyboard fails: no window manager, so Alt+F and F10
cannot open a menu bar), smoke start exit 124, no conflict marker left in
the tree.
Two defects found while re-testing the cable management after the
upstream merge, plus one change of intent for the numbering question.
The question "define a cable numbering rule now?" kept its answer in
the program settings, so saying no once silenced every project of the
program -- the exact opposite of what it should do. The answer now
travels with the project itself, stored on the <cable_autonums>
element as ask_numbering_rule="false"; a file which does not hold the
answer asks again, and taking the rule away in the project properties
or in the numbering window brings the question back for that project
alone. Read-only projects are no longer asked at all, since there is
nowhere in them to define a rule.
The numbering window could not hand out the first rule of a project:
it drew the rule, worked the numbers out with it, and only wrote the
rule into the project together with those numbers -- while the
planning refused to run on a project which had no rule saved yet.
The counters of a cable rule are kept under its fixed name anyway, so
planning now falls back to that name when the project holds no rule
yet: a rule which is being drawn in the window counts from the moment
it is complete, and the first renumbering of a project works.
Conflicts resolved in 24 files. Notable decisions:
- ico/icon-themes.qrc: upstream's icon folder restructure kept; the 36
cable icon entries re-added under the new qet/qet-dark path scheme
(XML valid, every referenced file exists).
- Toolbar system: upstream's DiagramToolbarSettings now owns the
toolbar filling. The cable tool is registered as
diagrameditor.add_cable (generic group loop) and listed on the
"diagram" toolbar right after the auto-break conductor action,
separated by a divider, exactly like before the merge.
- Paste: the cable lines of a copy are handed to
PasteNumberingImport::push() as extra commands, so paste + cable
lines + the numbering question stay ONE undo step on both paste
paths (DiagramView::paste and DiagramEventAddPaste::commit).
- PDF links: upstream's deterministic link sorting kept together with
the cable cross-reference injector (injectLinkTo -> links list).
- Element renumbering: upstream's ElementAutoNumSchemeCommand::renumber
replaces the old formula-based body of
QETProject::renumberElementsBySchemeTitle; the cable numbering rule
API (cableAutoNum, axis priority, rule name) is kept in full.
- Auto-numbering pages: upstream's scheme management kept, the Câbles
tab added as index 4 (changeToCableTab), both entry points
changeToCable() and changeToElement() kept side by side.
- SelectAutonumW: dirty tracking and the contextEdited signal moved
into upstream's insertPartRow() row API, so single-rule mode, the
rule-removable button and "confirm without change leaves the project
alone" keep working.
- xrefpropertieswidget: upstream's offset clamping kept; the cable
branch (Texte field, Police button, hidden display options) kept;
the stack-overlapping checkbox is hidden for cables.
Verified after the merge: build green (515/515, no errors), ctest
85/86 (only the pre-existing headless tst_menubarkeyboard failure),
offscreen smoke exit 124.
Generated by tools/qet-en-source/regenerate.sh, not edited by hand. The
tree is the fresh conversion; this commit only joins it to the PR's
history so the branch is never force-pushed.
Cables are drawn line objects (toolbar button next to the auto
break/reconnect button, click-move-click, right click cancels), not
components. The type comes from a CSV catalog following the material
list pattern (designation, cores, core colours, editable through the
entry dialog with "Nouvelle entrée" / "Modifier l'entrée").
Each core is bound to the wire its colour label stands on, and the
cable reference is generated per core and written into the Conductor
entry via Conductor::setCableReference(label, cable uuid, slot). The
conductor entry is where it has to live because the terminal strip
plan (Klemmenplan) consumes it in the next step.
Numbering: "Cables" rule under Programmeinstellungen/Neues
Projekt/Nummerierung auto (mirrored in project properties), literal
"W" fallback without a rule, French gate dialog when no rule exists,
Nummerierung menu with the renumber dialog (preferred axis, per-folio
counter, rule and counter state written back, hand-typed names ask,
whole-project scope).
Also included: label block and under-line texts with per-text font and
alignment plus the material-list cell margins, free-core placement and
right-click removal, claim questions for wires of other cables,
multi-selection drag as one undo step, type change with confirmation,
cross-references for type "Cable" (%f-%l%c, own font, clickable links
in exported PDFs), report propagation of the cable definition,
Listes menu (table of contents, material list, terminal strip manager,
terminal generator plugin, cable list), cable list with freely
selectable columns (installation/localisation of cable, start and end,
Blatt start/end, length, used cores...), CSV export dialog with column
pick and preview in the Projekt menu, script API (addTable kind
"cable_list", exportCableList) and a unit test for the type catalog.
Terminal elements only offered eight information fields in the
diagram editor (formula, label, comment, designation, manufacturer,
manufacturer reference, machine manufacturer reference, supplier).
That subset was chosen in faf4235be, before the size, quantity and
auxiliary fields existed, so a terminal could not be given a width,
height, depth or type.
Two position comparisons handed to std::sort were not strict weak
orderings, which std::sort requires; with the wrong kind of comparator
the sort is undefined behaviour (libstdc++ can read past the range,
MSVC debug builds assert "invalid comparator").
- comparPos(), used when renumbering the elements of a project, ended
with "<=" on x and y, so two elements at the same position (pasted at
the origin, placed by a script, stacked symbols) were each "before"
the other.
- The terminal numbering dialog compared positions with a 1 px
tolerance ("within 1 px counts as aligned, then compare the other
axis"), which is not transitive: terminals at x = 2, 1.1 and 0.2 give
a < b, b < c and c < a.
Move the comparisons into positionorder.h, a header-only helper:
xThenY()/yThenX() with "<", and roundedXThenY()/roundedYThenX(), which
round the positions to whole pixels first so that items a fraction of a
pixel apart still count as aligned, as the tolerance meant to, while
staying transitive. comparPos() keeps its folio and row-letter stages
and calls xThenY() for the last one.
No file-format change. Elements at distinct positions sort exactly as
before; the terminal order changes only for terminals less than a pixel
apart that straddle a half-pixel boundary.
Tests: tst_positionorder checks each order on a grid of awkward
positions by brute force (irreflexive, asymmetric, transitive, with a
transitive equivalence), the three-terminal cycle, twenty items at one
position, and that std::sort leaves the list sorted and intact. The
helper is new, so the test cannot fail on master; the call sites are
the two replacements in the diff.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Signed-off-by: Beat Hangartner <beat@hangartners.ch>
Every tr() source string in the code and the forms is now the English
text, and French is a translation (qet_fr.ts) like the other languages.
Generated, not hand-edited: master ef795a21e5 converted by
qet-en-source (harness 4c4ddc9).
3144 messages get an English source, 665 already had one, 0 left French; 8 shared-wording pairs disambiguated.
C++: 2904 literals in 233 files. Forms: 809 strings in 65 files. All 34 .ts files re-keyed; qet_fr.ts filled.
lupdate check: PASS. What each of 38 languages shows, old vs new: same 118266, English instead of French 38433, comment fallback 51, differences 0.
The "general" tab of the element properties starts its description with
tr("Élement\n"), missing the second accent. The French UI shows the typo,
and the misspelt string is the translation key in all 34 lang/qet_*.ts
files (and from there was copied into 11 phrase books).
This fixes the source string to "Élément\n" and renames the key in the
34 .ts files so every existing translation stays attached. Without the
.ts change, the next lupdate run would mark the old entry vanished and
add an empty "Élément" entry: lupdate's similar-text heuristic does not
carry the translation over (checked with Qt 6.11 lupdate on copies of
qet_de/pl/en/fr.ts). With the change, lupdate reports the entry as
already existing and keeps the translation. qet_fr.ts also gets the
corrected spelling as its translation.
No behaviour change besides the one character in the label. The phrase
books keep their copy of the typo for now; they are cleaned up with the
other phrase-book corrections.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Brings in master's DXF blocks (#1339) through #1354. The upright texts
now live in drawSymbol() too, and a turned symbol whose texts stay
horizontal is drawn in full like a mirrored one: an INSERT would turn
its texts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On GTK desktops (Mint, XFCE, GNOME) Qt hands QColorDialog to GTK's
chooser. Its "Custom" row is a recent-colours list kept by GTK: every
colour picked is pushed in on the left and the oldest drops out, so a
user's saved wire colours are lost (forum topic 3190). It also ignores
the custom colours QET saves (#918) and has no swatch grid for the
double-click to accept (#1172).
Pass DontUseNativeDialog at every colour dialog, so all platforms get
the dialog Windows already shows: 16 custom slots that change only on
"Add to Custom Colors", saved across restarts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Configuration > Personnaliser... (also at the bottom of a toolbar's
right-click menu) opens one window with a tab for each page that sets
how the user works: Barres d'outils, Contenu des barres, Barre de
raccourcis, Raccourcis and Gestes de la souris, like SolidWorks'
Tools > Customize. The tabs are the same pages the configuration
dialog shows, which keeps them. OK applies every tab, Cancel none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The right-drag ring showed the shortcut bar's commands for the selection.
A new Preferences page, "Gestes de la souris", lets the user pick the
ring's commands per selection context, one per direction, and choose 4 or
8 directions. Commands are dropped from the list onto a slot of a ring
editor, or placed with a button; Delete empties a slot.
A context the user never edits keeps following the shortcut bar, and 8
directions stays the default, so nothing changes for anyone who does not
open the page. A picked list is positional: a direction left empty, or
holding a command this build lacks, stays empty instead of shifting the
others. Stored like ShortcutBarSettings: diagrameditor/gestures/<context>
id lists in QSettings, defaults not stored.
tst_gesturesettings covers the defaults, positional lists, the 4/8
setting, the overlay's sectors and empty slots, and the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Configure QElectroTech > Toolbar contents: pick a toolbar, drag or add
commands from the list on the left, remove them with Delete, reorder,
add separators, and add, rename or delete toolbars of one's own.
Reset to defaults gives a toolbar its original contents back.
Each toolbar is stored as a list of command ids in QSettings
(diagrameditor/toolbars/<objectName>), the same pattern the shortcut
bar uses. A toolbar the user never changed stores nothing and is built
exactly as before; an id no command carries any more is skipped. The
four buttons that are widgets rather than commands (handle size, text
grid, background colour, conductor colour) get ids of their own and
can each be on one toolbar at a time. Stored scripts can go on any
toolbar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
fitCells() tried counts from 1, but BorderTitleBlock raises any column
or row count below 3 to 3. With very large cells (A5 portrait with
columns of about 200 px or more) the preset picked 2 columns; the folio
then got 3, came out wider than the sheet, and the dropdown fell back
to "Custom". Start the search, and the capped fallback, at 3, and
refuse a paper that leaves no room for 3 cells of the smallest size.
A5 portrait with 300 px columns now gives 3 x 179 px instead of
2 x 269 px; A4 landscape with the default cells is unchanged
(19 x 58 px). ctest 65/65.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A "Format" choice in the folio dimensions box sets the columns and rows
so the whole folio, title block included, has the size of an ISO A
sheet at the 96 dpi the PDF export uses. A4 landscape keeps 60 px
columns and 80 px rows and comes out as an A4 page in the PDF.
Nothing new is stored: the choice only fills in the columns and rows.
A folio whose size already matches a paper shows that paper; any other
shows "Custom". Changing the title block template after picking a paper
fits the folio again; a template too tall for the paper falls back to
"Custom".
The same box is in Folio properties and in the new-folio defaults of
the project and application settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The box showed Auto for -1 while IndependentTextItem::setTextWidth()
treats every value up to 0 as automatic. Typing 0, or the first click
on the up arrow from Auto, then put a width change in the undo history
that changed nothing, left the box on 0, and in live edit every later
change of X, Y, angle, text or size was replaced by that empty command.
Auto is 0 in the box now, like in the setter: no number is the automatic
width, and the first step up is 1 px.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The slot was auto-connected by name to QComboBox::activated(QString),
which Qt 6 removed, so connectSlotsByName() found no signal and picking
a variable in the "Texte composé" dialog did nothing. activated(int)
exists in Qt 5 and Qt 6; the slot never used its argument and reads
currentData() as before.
Same fix as the CompositeTextEditDialog half of #674, which was closed
unmerged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A project can now keep the texts drawn in its symbols, and the names of
their terminals, horizontal when a symbol is turned: Project properties >
General, "Garder horizontaux les textes des symboles pivotés". The box of
each text turns with the symbol; the text does not, and reads as it does
in the symbol itself.
It is a project setting, saved as <symbol_texts upright="true"/> and
only when on. A new project starts with it on; a project saved without
it (every existing one) reads with it off, so it looks and saves exactly
as before, and looks the same on every computer. The MCP server's new
projects start with it on too.
It builds on the mirror of #1354, which already redraws the texts of a
mirrored symbol readable: what the symbol does to its texts is now its
mirrors and, with the setting on, its turn (Element::symbolTextsTransform()).
ElementPictureFactory caches one drawing per such transform, terminal
names undo it the same way, and the DXF export places the texts alike.
The fields of a symbol (label, comment...) already keep their angle with
"Garder la rotation visuelle" and are left as they are.
Known limit: two texts stacked in a symbol end up side by side when it is
turned, and can overlap when kept horizontal; the setting can be turned
off for such a project.
Test: tst_uprightsymboltexts turns the symbols of a folio and checks the
angle of each motor's "M" in the DXF, with the setting off and on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A "Width" spin box in the properties of a free text sets the width it
wraps to (previous commit). "Auto" (-1) is the automatic width. It also
works with several selected texts, like the size and the angle; texts
with different widths show "Auto" and are left alone unless the box is
changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new page in Configurer QElectroTech, "Barres d'outils", sets for
every window (folio editor, element editor, title block editor):
- the icon size: default, 16, 24, 32 or 48 px
- the buttons: icon only, text beside the icon, or text under it
- locking the toolbars so they can't be dragged out of place
OK applies it to the open windows at once. The defaults are Qt's
own, and a default value removes its key, so nothing changes for
anyone who never opens the page. A toolbar inside a panel is left
alone; only the window's own toolbars are locked.
New test tst_toolbarsettings: defaults change nothing, saved values
reach every toolbar of an open window, back to defaults removes the
keys.
Third stage of discussion #1319.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Shortcuts page now shows:
- each command's icon, and a Menu column saying where it is
("Projet › Scripts"); the text filter matches that too
- a category filter beside the existing Bound/Unbound/Conflicts one
- "Rechercher par touche": press a key combination and only the
commands using it are listed, however the key is spelled in the
user's language. A key also finds the two-key shortcuts it starts.
- "Copier la liste": the shown rows go on the clipboard as
tab-separated text with a header, so they paste into a spreadsheet
one cell per column
ShortcutManager::ShortcutInfo carries the icon and the first live
QAction so the page needs no second registry.
New test tst_shortcutspage covers the menu path, the columns, both
filters and the copied text.
Second stage of discussion #1319.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since #849 the parts list has a row for every contact block (slave) and
terminal-type element. Users who draw the dots and bends where wires
branch as terminal-type symbols (114_connections) get one empty row per
junction: 109 of 151 rows on one reported cabinet.
Two options, both off by default so existing exports are unchanged:
- leave out the contact blocks: --no-slaves, "no_slaves" in qet_export,
or uncheck the new "Contacts esclaves" element type in the dialog;
- leave out the junctions: terminal-type elements with no label,
designation, manufacturer or manufacturer reference. --no-junctions,
"no_junctions", or "Laisser de côté les jonctions" in the dialog.
A terminal block with a label or a part number stays.
The element type filter had no box for slaves, so every query it built
left them out: the export dialog never listed contact blocks, although
the command line has since #849. The dialog now checks the new box by
default and gives the same rows as --export-bom. The box is unchecked by
default elsewhere, so nomenclature tables keep their rows.
docs/smart-device-bom.md still said slaves and terminals were excluded;
corrected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The stacking added in #1287 tested the crosses' bounding rects, so
crosses whose frames or empty margins touched were raised although no
text was hidden (the list display case found in review). The texts each
cross really draws are now recorded while its geometry is built, and a
cross is raised only when one of its texts would be drawn over a text of
another one.
A new "Empiler les références dont les textes se chevauchent" checkbox
in the cross reference properties, per type, turns the stacking off;
the crosses of that type are then only centred, as before #1287. It is
saved in the project (xref attribute "stackoverlapping") and in the
settings, and is on when absent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Schemas now get saved with a UUID and do not have to be looked up according to the form. They can be renamed and it gets reflected in existing elements. The GUI for
editing them is now much easier, e.g. forms can be reshuffled. A formula can be applied. Many options now also for conductors and sheets.
Review of #1272: scorpio810 asked for a warning box for users; the inline
box added in 9a55939bb is replaced by a pop-up, as the element editor
gives for unnamed terminals. When OK in Settings > General or in Project
properties turns a rule on (a limit where there was none, or one wire
per folio report), a warning says the rules are experimental, may change
with settings to redo if wires and conductors become separate objects,
and can all be turned off in Settings > General. OK goes on. Changing a
limit that was already on, or turning rules off, shows nothing.
tst_wiringrules: when the warning is due (WiringRules::turnsRuleOn()).
Checked in the GUI from both pages, and that a plain OK shows nothing.
English for translators: "Warning"; "The wires-per-terminal rules are an
experimental feature. They count wires as QElectroTech represents them
today. They could change, and your settings need redoing, if wires and
conductors become separate objects in a future version. All these rules
can be turned off in Configure QElectroTech > General."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015FPuYPS4T7QuEwjNu22rXD
Review of #1272 (scorpio810, after arummler's note that the rules would
need redesigning if wires and conductors become separate objects): a
warning box, with the standard warning icon, at the top of the rules in
Settings > General and in Project properties. It says the feature is
experimental, counts wires as QElectroTech models them today, and that
the rules, and the user's settings, could change if wires and conductors
are separated.
English for translators: "Experimental feature. These rules count wires
as QElectroTech represents them today; they could change, and your
settings need redoing, if wires and conductors become separate objects
in a future version."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015FPuYPS4T7QuEwjNu22rXD
Laurent Trinques