Saving replaced the project file with nothing kept of what it was: one
bad save -- a fault in QElectroTech, a full disk, a wrong edit saved by
mistake -- and the last good version was gone. AutoCAD keeps a .bak on
every save, KiCad several backups.
Before a project is saved over, the file as it was is now copied to a
folder beside it, "<name>-backups", named by the time that version was
saved ("industrial 2026-10-16 08-30-12.qetz"); only the newest are kept,
5 by default (Settings > General > Projects, 0 for none). A copy is
never a move, so a save that fails leaves the file in place; a copy that
fails only warns, the save goes on. The same bytes as the newest version
kept are not kept twice.
The prompt on opening ("Create a backup copy?"), which writes one dated
copy beside the project and never removes any, is left as it is.
New tst_previousversions (newest kept, same bytes once, same second,
nothing for a new file or a count of 0, a failed copy said); it fails
with the oldest never removed. Checked with the program: two scripted
saves of a .qetz leave the original and the first save in
industrial-backups, the project holds the second. ctest 107/107.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A project saves, for every placed symbol, where each terminal docked, its
orientation and its number. When the symbol's definition is replaced by one
whose terminal sits a few units elsewhere, wires were matched by exact
position and so were dropped on the next open: legacy wires by Terminal::
fromXml(), uuid wires by the uuid derived from the terminal's new place.
Element::fromXml() now pairs each saved terminal that nothing matched
exactly with the live terminal of the same orientation whose docking point
is within 5 units in x and y, only when each is the other's only candidate.
A pair registers the saved number, and the uuid derived from the old place,
which Diagram::findTerminals() checks after the derived uuid of the current
place. Wire ends reattached this way are counted and logged once per folio.
tst_movedterminals covers a move of 3 and 5 units (number and derived
uuid), 6 units, two candidates, and an unmoved terminal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The print window exported every page in one orientation, landscape
unless changed, so a portrait folio was shrunk onto a landscape page.
With "Fit in page" on, a PDF export now turns each page to portrait or
landscape as its folio is drawn. The preview keeps one orientation
(QPrintPreviewWidget lays out every page at one paper size), and a
printer keeps it too (only Qt's PDF engine accepts a new page layout
once printing has started). The orientation chosen in the window is
put back afterwards, so it is still the one saved.
The cross-reference links took their target from painter->viewport(),
which QPainter sets once when it opens, so on a turned page they missed
their text. They now use the device's size, as render() does.
tst_printpdforientation exports through the window: an A3 landscape and
an A3 portrait folio get one page each way; tiled pages keep the chosen
orientation; and the links on examples/industrial.qet's turned pages
land where they do when the export starts portrait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The .qetz files take this branch's side: it already holds #1473, and
adds the folio parts to join().
qetscriptapi.cpp: #1456 gave setConductorProperty() the voltage that
crosses a function separated terminal element; here that function hands
its work to applyConductorProperties(), so the change goes there, with
the properties captured before the pushes. The database path for folios
not built already gives up at such a terminal, so it builds the folio and
takes the same route.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tests/qttest/CMakeLists.txt: this branch's tst_folioimageload and
master's tst_svgsmallpictures (#1478) were added at the same place;
both are kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An SVG keeps every picture at full resolution, whatever size it is
drawn at: a folio with 22 phone photos shown at a tenth of their size
gave a 270 MB SVG and took 65 s to write, most of it compressing the
photos again.
The export dialog gets "SVG: smaller pictures" (off by default, kept
with the other export settings), and --export-svg gets
--svg-small-pictures. With it, a picture is stored at four times the
size it is drawn at when that is smaller than the picture; smaller
pictures stay whole. Four times is about 375 dpi on a printed folio.
The exporter sets Diagram::smallPictures() for its own drawing only,
so screen, print, PDF and PNG are unchanged. It is not part of
applyProperties(), which every format uses.
On that project: --export-svg 84.9 s -> 34.5 s (opening is 20 s of
both), 270 MB -> 57 MB, peak memory 2.45 -> 1.86 GB. Rendered at twice
the folio size, the two SVGs differ by more than 32/255 on 0.23 % of
pixels, along photo detail.
tst_svgsmallpictures: an 800x600 picture drawn at 0.1 is stored at
320x240 with the option, through --export-svg and through the
dialog's QPicture route, and at 800x600 without it; a 40x30 picture
stays whole. It fails when the factor is changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each picture of a folio was decoded in turn while its item was built,
a quarter of a second for a 12 megapixel photo. Diagram::fromXml() now
reads every picture of the folio first, decodes them all at once on a
pool of its own (one thread per core, at most one per picture), then
builds the items in file order in the GUI thread as before.
The decoding (base64 text, then the picture file) moves out of
DiagramImageItem::fromXml() into decodePicture(), which touches only
its argument. QImage::fromData() then QPixmap::fromImage() is what
QPixmap::loadFromData() does, so the pixels are the same.
On a 263 MB project with 22 photos on one folio: --info 21.3 s ->
12.5 s, the folio's content 10.6 s -> 3.2 s, opening its .qetz 15.6 s
-> 9.3 s. Peak memory +220 MB (1.81 -> 2.03 GB), the pictures' text
being converted by several threads at once. A resave is byte-identical
to master's, and so is a PNG export.
tst_folioimageload: six pictures come back with their own pixels and
positions, and an <image> without a picture does not stop the others.
It fails when the decoded pictures are handed to the wrong items.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
QETZ-FORMAT.md now describes format 4: the computed text left out of the
folio files, QElectroTech's own database built on opening rather than
stored, the tables written without keys, and format 3 among those read.
Tables written without keys keep their declared column types (INTEGER
was written as INT); tst_qetcontainer checks the columns and types
against the document, and that the file has no keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
QETZ-FORMAT.md describes format 3: the archive and its files, the
manifest and the version rules, every table and column of project.sqlite
and what it comes from, how rows are keyed, the markers a moved block
leaves, and what reading checks. Asked for in #1440: the format had no
written specification.
tst_qetcontainer checks that the schema the document gives is the one
written: the same tables and columns, in the same order, with the same
types and keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A .qetz held the engineering data twice: the document's tables, and
beside them QElectroTech's own project database (stage D2/D3), which
QElectroTech also builds from the document. Two copies of one fact can
disagree, and the copy cost a third of the file. Now project.sqlite holds
the document's tables only; QElectroTech builds its own project database
from them when the project opens, as it does for a .qet.
Measured (this build, lazy folios):
industrial (50 folios): 620 -> 374 KB, open 0.37 -> 0.65 s
f2099/nuri (136 folios): 3.27 -> 2.20 MB, open 2.2 -> 3.5 s
The same projects as .qet open in 3.3 s and 23 s.
Saving still copies the file of every folio not built, with its rows
(stage D4): the project keeps the part each folio was read from. nuri
opened and saved again: 6.3 s, no folio built, the same bytes.
A symbol's terminal list is left out of the folio file when every
folio, symbol and wire has a uuid of its own, now checked on the
document (QetContainer::ownUuids()) rather than by the stored database
being written.
Checked: 342 corpus projects open, .qetz -> .qet equals the plain
resave, a .qetz saved twice gives the same bytes; tst_lazyfolios,
tst_qetcontainer, tst_resaveunchanged (which now checks project.sqlite
holds only the document's tables).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1473 keys the .qetz database's rows by the items' uuids, stores
true/false as 1/0 and writes the format to PRAGMA user_version, as
format 3. This branch's own changes (computed text left out of the
folios, tables without keys, folios kept as they were) become format 4;
formats 2 and 3 are still read.
Folios kept as they were copy their rows by folio uuid, and the keys of
those rows are kept from the other items' keys. The document's tables
are named doc_<name> only beside the project database's own tables.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Answers the points arummler raised in discussion #1440 about the
project.sqlite that .qetz files carry (format 2, PR #1462):
- Folio rows were keyed "f1", "f2"... by position, and every symbol and
wire carried a separate key beside its uuid. A row's key is now the
item's own uuid, which stays in the folio file; no key attribute is
added to the folio files of a project as QElectroTech saves it. An item
without a usable uuid (none, or one another item shares, F100) gets a
uuid made from its own content, the same on every save, never from
where it is.
- freezeLabel is stored as 0/1 (INTEGER) and an element information's
"show" in its own column; a value QElectroTech would not write stays in
the folio file verbatim. The tag is kept in the JSON only when it is
not the usual one.
- The database's PRAGMA user_version holds the format.
Format 3. Format 2 files, written by development builds since #1462,
still open: tst_qetcontainer reads one (fixtures/qetz_format2.qetz,
grafcet.qet saved by master aa503aec8) and saves it again.
Checked: tst_qetcontainer 38/38, and 343/343 readable projects of the
legacy corpus round-trip exactly. Every example saved as .qetz then .qet
equals its plain resave, and every format 2 file read by this build
equals what master writes from it. Each new test goes red with the
behaviour it checks broken.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Scripts get conductorPropertyByUuid() and setConductorPropertyByUuid(),
the wire named by its uuid (conductorUuids()) rather than by a symbol's
terminal. A change goes to every wire at the wire's potential, as
setConductorProperty() does. When those wires are all on folios not
built, none is numbered by a formula, and what changes in each is what a
.qetz database holds in its own columns (number, function, voltage,
colour and section of the wire, cable, bus), it goes through the project
database: the store and the conductor rows, undoable by uuid. The
potential is followed in the database (projectDataBase::potentialWires():
through wire ends, folio reports and terminal blocks, as
Conductor::relatedPotentialConductors() follows it; a terminal block that
isolates its terminals answers nothing). Building a wire takes its change
(Conductor::fromXml()); a .qetz save writes it in the database, the folio
file copied; a folio written from its XML gets it there; a .qet builds.
Anything else builds the folio, as before.
tst_lazyfolios: every wire's potential from the database = as followed,
1 342 of 1 342 (industrial, eager and from a .qetz); a cable set by uuid
on a 14-wire potential builds no folio, reaches every wire, saves as when
built, undoes, shows once built (fails when building ignores the change,
and when the .qetz writer does). The test's run limit is raised (500 s ->
1 500 s, ctest 1 800 s): under load it ran past 500 s. ctest 96/96 both
ways.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fourth stage of the zipped project file (#1440), format 2: what an
engineer would put in a list -- folio title-block fields and
properties, project properties, a symbol's uuid, type, prefix,
information and links, a wire's ends, number, function, colour,
section, cable and bus -- moves out of the XML into project.sqlite in
the .qetz, and lives only there. The folio files keep where things are
drawn. On opening it goes back into the document before the usual
reader runs, so nothing else in QElectroTech changes yet (the program
reading the database directly is the next step of the roadmap).
Each moved item keeps a key in the XML (qetz-key: its uuid where
unique); each moved block leaves a marker where it was, which keeps the
whitespace around it apart. A block of a shape this does not model
stays in the XML. A file is untrusted: the database is read with
trusted_schema off, query_only, and only from names that are plain
tables. Format 2 readers still open format 1; a format 1 reader
refuses format 2.
Tests (tst_qetcontainer): every example back exactly, whitespace
included; databaseHoldsTheData (industrial.qet: the folio files hold no
information, links, wire numbers or properties; the row counts match).
Outside ctest: 341 of 341 projects QET can open give the same .qet
through a format 2 .qetz.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Wga9B92BNurDEtxxtCDxf
Second stage of the zipped project file (#1440): QetContainer::split()
turns a project document into the entries of a .qetz -- mimetype first
and stored, a manifest with the format and the oldest format allowed to
read it, project.xml with each part replaced by <qetz-part file=.../>,
one file per folio, per symbol definition and per title block template,
and folio pictures as PNG files named by their SHA-256, stored once
each. join() puts it back and refuses a file of a later format, a
missing part or anything that is not a .qetz.
A picture leaves its folio only if its base64 comes back exactly, so
nothing here can change a project. Parts are written as QET writes a
.qet and read as it reads one. Still nothing opens or saves a .qetz.
Test: tst_qetcontainer, every example split, zipped, unzipped and
joined back to the same document (whitespace between elements aside);
pictures out of the folios once each; later format and missing part
refused. With QET_CONTAINER_CORPUS it also runs on a folder of projects:
341 of 341 readable projects collected from the bugtracker, GitHub and
the forum come back the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Wga9B92BNurDEtxxtCDxf
First stage of the zipped project file discussed in #1440 (and #865):
the zip itself, nothing reads or writes a project with it yet.
miniz 3.1.2 (MIT, one .c and one .h, no zlib) is bundled unmodified in
sources/container/miniz, as the LZMA SDK is for .edz files, so builds
need nothing new. QetZip wraps it: plain ZIP with Deflate, entries stored
where asked (pictures, the mimetype entry), written through QSaveFile so
a failed save keeps the previous file, without timestamps so that the
same project gives the same bytes. Reading refuses unsafe or repeated
entry names, encrypted entries and archives over 2 GB once unpacked.
Test: tst_qetzip (round trip, same bytes twice, names refused both ways,
truncated and non-zip input). A written archive also passes unzip -t and
Python's zipfile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019Wga9B92BNurDEtxxtCDxf
Deleting a cable and pressing Ctrl+Z twice leaves the cable out of the
project while AddCableCommand still stands and still thinks it has to
clean that cable up. The next edit of any kind makes the stack throw the
undone commands away: ~RemoveCableCommand frees the cable, and
~AddCableCommand frees the same memory again. A plain build hides it,
AddressSanitizer reports it as a heap-use-after-free in
addcablecommand.cpp (blocking review comment by ispyisail).
AddCableCommand now holds the cable as a QPointer, which is what
RemoveCableCommand already did: whoever of the two runs first frees it,
the other one sees a null pointer and has nothing left to do, in either
order of destruction. The destructor also stopped dereferencing
project() without checking it, which it did on that very line.
Covered by tst_cableundointegration, a probe linked against the
application's objects the way the other integration probes are. It draws
a cable, deletes it, undoes twice and pushes a further edit -- the
sequence which used to crash. Verified in both directions: with the raw
pointer the probe dies with SIGSEGV inside ~AddCableCommand called from
QUndoStack::push, with the QPointer it prints its PASS line.
Upstream moved 56 commits ahead of the last merge. Six files conflicted,
all of them files where upstream's French -> English tr() translation wave
touched lines we had also touched with the cable feature. Resolution rule
applied everywhere: take upstream's English source strings, keep our cable
additions.
Resolved:
- sources/ui/xrefpropertieswidget.ui : kept our structure (m_labels_gb
pulled out of the display group, m_slave_row, the m_font_pb "Police..."
button of the cable cross-reference) and mechanically applied upstream's
20 English string replacements on top of it.
- sources/ui/xrefpropertieswidget.cpp : our version plus upstream's 7
translated combo entries; the tr("Cable") item we add for the cable
cross-reference type stays.
- sources/autoNum/ui/numparteditorw.cpp : upstream's English part names
("number format 1", "Sheet no.", "Plant", "Location", ...) for the
number-format list, with our comment explaining why type 3 (cable) takes
the conductor kinds of variable.
- sources/ui/configpage/configpages.cpp : upstream's English tab titles
(Conductors / Elements / Sheets) plus our Cables tab.
- sources/ui/configpage/projectconfigpages.cpp : upstream's "Sheets" tab
title plus our Cables tab block (single-rule SelectAutonumW(3)).
- sources/qetdiagrameditor.cpp : union of both sides - upstream's new
"Add a generic device" action (icon, status tip, data id) and its
English menu names ("File"/"Edit"/"Project"/"Display"), together with our
cable action, the Numbering and Lists menus, the cable list actions and
the CSV export in the Project menu.
Kept French: our own cable tr() source strings stay French for now. That
is the smaller change and the translation pass can follow separately.
Verified: full build 1065/1065, ctest 91/92 (only the pre-existing
headless tst_menubarkeyboard fails: no window manager, so Alt+F and F10
cannot open a menu bar), smoke start exit 124, no conflict marker left in
the tree.
DiagramImageItem::fromXml() read the size attribute with a plain
toDouble(). A picture whose size was missing or not a number got size
0, so it was invisible on the folio, left out of the SVG export, and
a resave wrote size="0" back, which then stayed 0 on every load. "nan"
was kept and written back as such. The <transform> child, which newer
files carry, already defaults its scale to 1.
Read the size with an ok flag and use 1, the size a picture is added
with, when it is missing, not a number, not finite, or 0.
No file-format change for usable sizes. A picture that an earlier save
left at size="0" shows again, at size 1, after this change.
Tests: tst_imagemissingsize runs the binary's --resave and --export-svg
on a fixture with six small pictures: size missing, "0", "nan", "big",
"0.5" and "2". The first four fail on master (saved as 0, 0, nan, 0)
and the export draws only 3 of the 6 pictures there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Beat Hangartner <beat@hangartners.ch>
"nan", "inf" and "-inf" parse as numbers, and IndependentTextItem::
fromXml() used them as they came for x, y and rotation. A project with
such a value kept it: --resave wrote x="nan" back, and the SVG export
drew the text at matrix(1,0,0,1,nan,95), which is not valid SVG.
Conductors and element texts already load a non-finite position as 0.
Load a non-finite x, y or rotation of a free text as 0, the same way.
No file-format change: finite values load and save as before.
Tests: tst_freetextnonfinite runs the binary's --resave and --export-svg
on a fixture with x="nan", y="inf", x="-inf", rotation="nan" and a
finite text (61.7, 61.3, 37 degrees, kept as they are). The four
non-finite cases and the export check fail on master.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Beat Hangartner <beat@hangartners.ch>
A shape's pivot follows its centre when it is resized, unless it was
placed by hand: setLine() and setRect() do that, and so did dragging a
rectangle's or an ellipse's handles, which goes through setRect().
Dragging an end of a line moved the end directly and left the pivot
where it was, so the next rotation turned the line around a point
beside it. Undo and redo already re-centred it, through setLine().
The line's handle drag now applies the same rule.
New tst_linepivotresize, on a real folio with scene mouse events: the
pivot is at the new centre after an end is dragged (fails without the
change: it stays at the old centre), and after undo and redo; a pivot
placed by hand stays; a rectangle's pivot follows as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tst_imagehandleescape covers #1414 through the real editor: a picture's
resize, rotate and pivot handle are pressed and dragged with scene mouse
events, Escape goes to the DiagramView, then the rest of the gesture.
Each time the picture is back as it was at the press, still selected,
and no undo step is recorded; without a drag, Escape still clears the
selection. The three drag cases fail with #1414 reversed (Escape cleared
the selection under the drag).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The first test that runs a real QETApp, offscreen (qetapptest.h): it
links qelectrotech_objects, keeps its settings, configuration and data
in a temporary folder, and triggers the editor's own actions.
tst_rotateselectionimage covers #1413: Space ("rotate_selection") turns
a picture's rotationAngle, not QGraphicsItem's rotation, in place, and a
picture read back from its XML has the angle; undo and redo, twice; and
a group turn ("rotate_group_selection") moves each picture's pivot a
quarter turn around the group's centre. All three fail with the code
from before #1413.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a picture, or "Crop on the folio" in its context
menu, crops it in place: the whole original is shown, dimmed outside
the region kept, and eight handles move the crop's edges; a drag inside
the frame moves the crop window over the original. Enter, a double-click
or a click elsewhere applies the crop as one undo step, keeping the
kept region where it is on the folio; Escape drops it. Rotated and
scaled pictures are cropped along their own sides.
While cropping, the picture is the folio's keyboardItem (see the
Escape commit before this one), so the view hands it Enter and Escape
before its own shortcuts: Enter does not repeat the last placing
command, and Escape does not clear the selection, which would apply
the crop.
The context menu gains "Reset crop", which shows the
whole original again, and "Properties...", since double-click no
longer opens them. The crop dialog stays available.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts resolved in 24 files. Notable decisions:
- ico/icon-themes.qrc: upstream's icon folder restructure kept; the 36
cable icon entries re-added under the new qet/qet-dark path scheme
(XML valid, every referenced file exists).
- Toolbar system: upstream's DiagramToolbarSettings now owns the
toolbar filling. The cable tool is registered as
diagrameditor.add_cable (generic group loop) and listed on the
"diagram" toolbar right after the auto-break conductor action,
separated by a divider, exactly like before the merge.
- Paste: the cable lines of a copy are handed to
PasteNumberingImport::push() as extra commands, so paste + cable
lines + the numbering question stay ONE undo step on both paste
paths (DiagramView::paste and DiagramEventAddPaste::commit).
- PDF links: upstream's deterministic link sorting kept together with
the cable cross-reference injector (injectLinkTo -> links list).
- Element renumbering: upstream's ElementAutoNumSchemeCommand::renumber
replaces the old formula-based body of
QETProject::renumberElementsBySchemeTitle; the cable numbering rule
API (cableAutoNum, axis priority, rule name) is kept in full.
- Auto-numbering pages: upstream's scheme management kept, the Câbles
tab added as index 4 (changeToCableTab), both entry points
changeToCable() and changeToElement() kept side by side.
- SelectAutonumW: dirty tracking and the contextEdited signal moved
into upstream's insertPartRow() row API, so single-rule mode, the
rule-removable button and "confirm without change leaves the project
alone" keep working.
- xrefpropertieswidget: upstream's offset clamping kept; the cable
branch (Texte field, Police button, hidden display options) kept;
the stack-overlapping checkbox is hidden for cables.
Verified after the merge: build green (515/515, no errors), ctest
85/86 (only the pre-existing headless tst_menubarkeyboard failure),
offscreen smoke exit 124.
Edit > Add > Generic device (also on the Add toolbar, and found by the
command search as diagrameditor.add_generic_device) opens a three-page
wizard for devices used too rarely to draw a symbol for, such as a VSD
or a power supply:
1. Layout: terminals per side (0 for none), a gap every N terminals,
divider marks on gaps, groups lined up across opposite sides, pitch
and extra size.
2. Terminals: a table per side and the same list as one line, where
In{4} is In1..In4, Q{z4} is Q0..Q3, X{3-6} is X3..X6 and an empty
entry is a gap; number pins 1..n counter-clockwise; paste rows of
side, name, function from a spreadsheet or a CSV file.
3. Information: name, label, manufacturer, reference, description.
A preview beside every page shows the box as it will be placed. Finish,
available from the first page, writes an ordinary symbol to the folder
"Generic devices" of the project's collection and puts it on the cursor.
The box sizes itself to its terminals and their names; every terminal
lands on the grid and gets a uuid. No new XML: any QElectroTech reads it.
The layout is pure (sources/genericdevice/genericdevice.cpp) and tested
by tst_genericdevice. ElementPictureFactory gains pictureFromDefinition()
to draw the preview with the same code as a placed element.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Symbols copied in old versions can share one uuid on a folio. Up to
0.100 that was harmless: a wire on a terminal without uuid was saved by
terminal number. Since #1118 every terminal has a uuid, so every wire was
saved by symbol uuid and terminal uuid, and on reopening findTerminal()
took the first symbol carrying it: all the copies' wires landed on it.
- Save: a wire end on a symbol whose uuid another symbol of the folio
also carries is written by terminal number again.
- Load: when a wire's uuid names several symbols, pickEnds() takes the
pair whose distance matches the wire's saved path, then the symbols
whose labels match the ones saved with the wire, then two terminals no
wire joins yet; otherwise the first, as before. This repairs a file a
build with #1118 saved once.
tst_sharedsymboluuid gives the three lamps of
Habitat-Schemas_developpes.qet one uuid: master loses a net after a
save (8 of 9) and reopens the file it saved with 8; with this, 9 both
times. The 25 examples save the same as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Save settings as... now asks which parts to save: toolbars, keyboard
shortcuts and mouse gestures; defaults for new projects (folio, title
block, wires, numbering); everything else. All three ticked writes the
same complete file as before (format 1, collection folders included).
A file with only some parts is format 2 and lists its parts. Loading it
replaces those parts and keeps every other setting. The folders of the
collections are never in such a file: they rarely exist on another
computer. A QElectroTech that only knows format 1 refuses it rather than
loading it as complete and losing every other setting.
A file holding only the defaults for new projects loads without closing
QElectroTech, since QETProject reads them again for every new project.
Which part a key belongs to is ConfigProfile::partOf(); a key it does
not list falls in "everything else", so a new setting can never be left
out of every part. The test checks that what BorderProperties writes for
the folio defaults lands in the new-project part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Picture files (png, jpg, bmp, svg) dragged from the file manager onto a
folio are added there: the first centred on the drop point, the others
cascaded from it, and one undo step removes them all. A picture larger
than the visible part of the folio is scaled down to fit it. Files that
cannot be used are listed once after the others have been placed, and a
drop holding only other files (a .qet project) still reaches the main
window, which opens it.
The checks a picture must pass before it is embedded in the project
move into ImageDrop::load and are now shared by the drop, the add image
dialog and the script API: a regular file of at most 10 MB, and at most
64 megapixels, read from the header before any pixel is allocated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A static text's x/y in an .elmt file are the baseline-left of the text.
A program writing an element (a pinout generator, dxf2elmt) then has to
measure the text with QET's font metrics to right-align or centre it.
With the opt-in anchor="alignment", x is the left edge, centre or right
edge selected by Halignment; y stays the baseline. The box is the text
without the document margin, as ElementPictureFactory draws it, so the
editor and the folio agree. Rotation pivots on x/y as before.
The element editor reads it and writes it back for the texts that had
it; it does not add it to other texts. Files without anchor draw and
save as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cables are drawn line objects (toolbar button next to the auto
break/reconnect button, click-move-click, right click cancels), not
components. The type comes from a CSV catalog following the material
list pattern (designation, cores, core colours, editable through the
entry dialog with "Nouvelle entrée" / "Modifier l'entrée").
Each core is bound to the wire its colour label stands on, and the
cable reference is generated per core and written into the Conductor
entry via Conductor::setCableReference(label, cable uuid, slot). The
conductor entry is where it has to live because the terminal strip
plan (Klemmenplan) consumes it in the next step.
Numbering: "Cables" rule under Programmeinstellungen/Neues
Projekt/Nummerierung auto (mirrored in project properties), literal
"W" fallback without a rule, French gate dialog when no rule exists,
Nummerierung menu with the renumber dialog (preferred axis, per-folio
counter, rule and counter state written back, hand-typed names ask,
whole-project scope).
Also included: label block and under-line texts with per-text font and
alignment plus the material-list cell margins, free-core placement and
right-click removal, claim questions for wires of other cables,
multi-selection drag as one undo step, type change with confirmation,
cross-references for type "Cable" (%f-%l%c, own font, clickable links
in exported PDFs), report propagation of the cable definition,
Listes menu (table of contents, material list, terminal strip manager,
terminal generator plugin, cable list), cable list with freely
selectable columns (installation/localisation of cable, start and end,
Blatt start/end, length, used cores...), CSV export dialog with column
pick and preview in the Projekt menu, script API (addTable kind
"cable_list", exportCableList) and a unit test for the type catalog.
ispyisail