DialogWaiting pumps the event loop while the folios of a project are
built, so a second openAndAddProject() can run to completion nested
inside the first one (drop on another editor window, queued open) and
the plain reset/read counters would then report the wrong numbers.
Replace them with a RAII counting window (FontRestorationScope): the
constructor keeps the enclosing counts aside, the destructor restores
them. The nesting is strictly LIFO - the nested load completes inside
the pump of the outer one - so each load reports exactly its own
numbers, and the early-return paths of openAndAddProject() restore the
outer window automatically.
Suggested by ispyisail in the review of the reporting change.
Until now a font description that could not be parsed only produced
console warnings most users never see, so nobody learned that their
texts silently lost their formatting (see the reports in issue #553).
Count in QETUtils::fontFromString() how many descriptions were salvaged
from a foreign or corrupt format and how many stayed unreadable, and
show a message box after opening a project when either happened:
salvaged descriptions are rewritten in the stable format on the next
save, unreadable ones fall back to the default font. Projects without
font issues open exactly as before, and non-interactive opens only log
the counters.
Verified with a Qt 5.15 build on a project carrying 52 19-field and
one 21-field description: the dialog reports 53 restored descriptions;
the same file on a Qt 6.11 build (which parses those formats natively)
shows no dialog.
See issue #553.
Three new QUndoCommand subclasses (AddDiagramCommand, RemoveDiagramCommand,
MoveDiagramCommand) pushed onto the project's existing (already
project-scoped) undo stack, so folio structure edits are undoable
alongside every item-level edit already on that stack.
- QETProject::addDiagram()/detachDiagram() are the shared attach/detach
primitives: they mutate the diagram list, connect/disconnect the two
per-diagram signals set up at add time, and emit diagramAdded/
diagramRemoved. AddDiagramCommand and RemoveDiagramCommand call these
(via friend access) for both redo and undo, so a removed diagram is
parked rather than destroyed -- it's only actually deleted if the
command itself falls out of undo history while still detached.
- ProjectView reacts to diagramRemoved the same way it already reacted to
diagramAdded (tearing down/rebuilding the tab), so both directions of
both commands go through the same reactive path every other diagram
listener (project database, cross-references, generic panel) already
relies on.
- MoveDiagramCommand wraps a new ProjectView::setDiagramPosition(), which
performs the tab move and the project's diagramOrderChanged() list
reorder synchronously in one step, instead of relying on the queued
tabMoved connection (needed for interactive drag-and-drop) to catch up
later -- avoiding a second, redundant reorder from that queued call.
- Multi-folio delete and multi-folio move (QETDiagramEditor::removeDiagrams()
and the moveDiagram*(QList<Diagram*>) batch slots) wrap their per-diagram
loop in QUndoStack::beginMacro()/endMacro(), so a multi-select action is
one undo step, matching current UX.
- Softened the delete confirmation's "this change is irreversible" wording
now that it no longer is.
Verified headlessly (Xvfb + xdotool + scrot): add/undo/redo, delete/undo/
redo (single and multi-select, single undo step for the batch), and
move/undo/redo all behave correctly against a 7-folio project.
Implements the first pillar of #574: a "Shortcuts" preferences page letting
users rebind, search and reset every keyboard shortcut in the app.
What it does
- New ShortcutManager singleton: every one of the ~95 setShortcut()/
setShortcuts() call sites across qet.cpp, qetmainwindow.cpp,
elementspanelwidget.cpp, autonumberingdockwidget.cpp, richtexteditor.cpp,
qetdiagrameditor.cpp, qettemplateeditor.cpp and qetelementeditor.cpp now
calls registerAction(target, id, category, default_sequence) instead,
which applies the user's saved override (or the default) and remembers
the target for later editing.
- New ShortcutsConfigPage, added to the existing "Configurer QElectroTech"
dialog: a filterable table of every registered shortcut, grouped by
category, each with a QKeySequenceEdit and a per-row reset button, plus a
"reset all" button. Bindings are only persisted (via
ShortcutManager::setSequence()) when the dialog is accepted.
- Conflict detection: rows whose currently-edited sequence collides with
another row are highlighted with a tooltip naming the conflicting action.
- Overrides are stored under a "shortcuts/" QSettings group, one key per
id, keyed to match the id (not persisted at all when equal to the
hardcoded default), so a future QET version can safely raise a default
for anyone who never customized it.
Design notes
- Targets are handled generically via QObject rather than QAction, since one
call site (autonumberingdockwidget's "Configurer" button) is a
QPushButton, not a QAction. Both declare an identical "shortcut"
QKeySequence Q_PROPERTY, so registerAction() reads/writes it through the
property system instead of needing a separate code path.
- Several live targets can share one id at once -- QET allows multiple
windows of the same kind (diagram editor, element editor...) open
simultaneously, each constructing its own QAction with the same id.
setSequence() updates every live target for that id in one call, so a
rebind takes effect in all open windows immediately, without restart.
- A shortcut's description is captured from its target's text() the first
time that id is registered, then cached -- so the config page stays
correct even after the owning window is closed. One consequence: a
shortcut belonging to an on-demand window (element editor, title block
editor, rich text editor) only appears in the list once that window has
been opened at least once in the current session, since nothing has
registered its id yet otherwise.
Testing
Full CMake build (qmake CONFIG+=no_kf5, Qt 5.15) compiles clean with zero
errors and zero new warnings. Verified end-to-end in a real running session
(Xvfb + xdotool):
- The Shortcuts page appears in Configure QElectroTech with the right icon,
lists every always-registered shortcut with correct category/action name/
current binding.
- The filter box correctly narrows the list, and correctly returns nothing
for an action whose owning window hasn't been constructed yet this
session (confirming the on-demand-registration behavior above is working
as designed, not silently broken).
- Conflict detection correctly flagged a real pre-existing same-key overlap
between "Supprimer" (delete selection, Del) and "Supprimer ce folio"
(delete diagram from panel, Del) -- both highlighted with explanatory
tooltips.
- Rebound "Manuel en ligne" to Ctrl+Shift+M, clicked OK: persisted under
[shortcuts] in QElectroTech.conf, and the Aide menu's entry showed the new
binding immediately, no restart needed.
- Reopened the dialog: the rebind was still shown. Clicked its per-row
reset button, then OK: the settings key was removed entirely (not stored
as "F1"), correctly falling back to the hardcoded default.
Retrofitting the Tab/Shift+Tab, select-all (#585) and Ctrl+G jump-to-element
(#586) shortcuts through this registry is left for a follow-up once those
PRs land, to avoid re-merging still-open branches into this one.
Developed with assistance from Claude (Anthropic).
Implements the third pillar of #574: a lightweight quick-open popup
for jumping straight to an element on the current diagram, rather
than scrolling/scanning visually.
New JumpToElementDialog (sources/ui/): a small QDialog with a filter
QLineEdit and a live-filtered QListWidget beneath it. Built from
every Element on the diagram, searchable against its label
(elementInformations().value("label")), type name (Element::name()),
and every other element information value, joined into one
lowercased search string per candidate. Up/Down move through the
filtered list, Enter selects the highlighted element on the diagram
(clearing the rest of the selection) and scrolls it into view via
ensureVisible(), Escape cancels without changing the current
selection. All three are handled via an event filter on the line
edit, so the user never has to leave the text field to navigate or
confirm.
Triggered by a new Ctrl+G action in QETDiagramEditor, added next to
the existing Ctrl+F "search and replace" action and to the Edit
menu. Confirmed free: not used anywhere in qetdiagrameditor.cpp or
qetmainwindow.cpp today.
Explicitly not a duplicate of the existing SearchAndReplace module
(also on this menu, via Ctrl+F): that's a bulk property search/replace
tool across whole diagrams; this is a single-item navigational
popup with no editing capability.
Verified end-to-end in a real running session (Xvfb + xdotool)
against a multi-transistor schematic: Ctrl+G opens the popup listing
every element; typing "Q16" live-filters down to the one match;
arrow keys move the highlighted row through the filtered list;
Enter selects the highlighted element (confirmed via the properties
panel showing its label) and closes the popup; Escape closes it
without changing the selection.
See discussion #574.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a ProjectUsageTracker (sources/project/) that accumulates how
long a project has been the active tab, using QElapsedTimer so the
value is computed on demand rather than via polling. It's hosted on
ProjectPropertiesHandler per that class's own stated design intent
("all new properties should be managed by this class").
The accumulated time is persisted as a new <usage time_spent="N"
enabled="true|false"/> element, a sibling of <properties> in the
project XML, written/read by new QETProject::writeUsageXml()/
readUsageXml(). It rides along on the existing autosave path for
free, since writeBackup() already serializes the full project via
toXml().
QETDiagramEditor::subWindowActivated() now pauses every open
project's tracker except the one whose tab just became current, so
switching between several open projects keeps each project's tracked
time isolated.
Surfaced in the existing Project Properties "Général" page: a
"Temps passé sur ce projet" display, a "Réinitialiser" button, and
an opt-out checkbox ("uniquement enregistré localement dans ce
fichier" - this is local-only, never transmitted anywhere).
Verified beyond compiling: full CMake build, then an actual runtime
session confirming the saved XML's time_spent value, that closing
and reopening the project round-trips and resumes timing, that the
reset button works, and - the key correctness check - that with two
projects open, the inactive one's time_spent stays frozen while the
active one accumulates real elapsed time, over the same interval.
See discussion #576.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Provide a small KAutoSaveFile-compatible implementation for the no-KF5 build path and use it to keep the existing crash-recovery code active when BUILD_WITH_KF5=OFF.
The normal KF5 build still uses the KDE KAutoSaveFile implementation.
Assisted-by: pi coding agent / Mika (OpenAI GPT-5.5)
The Windows search list for the qet_tb_generator plugin included
`~/Application Data/qet/qet_tb_generator.exe` as a fallback. That legacy
junction path is the same inaccessible location the standard-directories
change moved QET away from, and it never matched a pip install anyway:
`pip install qet_tb_generator` puts the executable in the Python Scripts
directory (`...\PythonXX\Scripts` on PATH, or
`%APPDATA%\Python\PythonXX\Scripts` for --user installs), not in
`QETApp::dataDir()`.
Pip installs are already found via QStandardPaths::findExecutable (PATH),
and manual binary drops via dataDir()/binary and the working directory.
The legacy entry only matched old manual drops into the inaccessible
folder, so remove it.
Refs qelectrotech-source-mirror#199
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
In case of user try to delete a terminal element who is bridged
or belong to a physical terminal with more than one level, the deletion
is aborted to avoid mistake in the terminal strip parent of the terminal
element. A dialog is opened when the deletion can't be to explain to
user what to do for enable the deletion.
- include Liberation-Fonts and osifont
(thanks elevatormind!)
- use "Liberation Sans" as default-font
- adjust License-Tab in About-Form
- Bugfix: When selecting a font, the current
font is highlighted in dialog
- adjust some whitespace and English comments
clazy is a compiler plugin which allows clang to understand Qt
semantics. You get more than 50 Qt related compiler warnings, ranging
from unneeded memory allocations to misusage of API, including fix-its
for automatic refactoring.
https://invent.kde.org/sdk/clazy
Now it's better readable and maintainable up to the moment
we have our own internal Terminal-Manager for productive use.
Additionally added the storage location “dataDir()/binary”,
so that the new structure for the separation of
configuration and data can be properly kept
All export files that are derived from the project (BOM,
nomenclature, etc.) are saved in the same directory by default.
In this context, the standard directories have been grouped
together in qetapp.cpp / qetapp.h so that only one place needs
to be searched for in case of any adjustments.
Laurent Trinques