WIP2

.gitignore

@@ -1,7 +1,2 @@
 *.snap
 .flatpak-builder
-# Qt build output
-*.user
-# doxygen Doxyfile output
-doc/
-QElectroTech.tag

SingleApplication/singleapplication.cpp

@@ -27,7 +27,6 @@
 #include <QtCore/QSharedMemory>
 #if QT_VERSION < QT_VERSION_CHECK(5, 10, 0)	// ### Qt 6: remove
 #else
-#pragma message("@TODO remove code for QT 5.10 or later")
 #include <QRandomGenerator>
 #endif
 #include "singleapplication.h"
@@ -107,7 +106,6 @@ SingleApplication::SingleApplication( int &argc, char *argv[], bool allowSeconda
 		qsrand( QDateTime::currentMSecsSinceEpoch() % std::numeric_limits<uint>::max() );
 		QThread::sleep( 8 + static_cast <unsigned long>( static_cast <float>( qrand() ) / RAND_MAX * 10 ) );
 #else
-#pragma message("@TODO remove code for QT 5.10 or later")
 		quint32 value = QRandomGenerator::global()->generate();
 		QThread::sleep( 8 + static_cast <unsigned long>( static_cast <float>( value ) / RAND_MAX * 10 ) );
 #endif

elements/10_electric/91_en_60617/en_60617_11/qet_directory

@@ -3,7 +3,5 @@
         <name lang="fr">11- Schémas et plans d'installation, architecturaux et topographiques</name>
         <name lang="es">11- Dibujos y planos arquitectónicos y topográficos</name>
         <name lang="da">11- Bygningsmæssige og topografiske installationstegninger og -skemaer</name>
-        <name lang="en">11- Installation, architectural and topographical diagrams and plans</name>
-        <name lang="be">11- Installatie, bouwkundig en topografische schema's en plannen</name>
     </names>
 </qet-directory>

sources/ElementsCollection/elementscollectionwidget.cpp

@@ -641,7 +641,6 @@ void ElementsCollectionWidget::search()
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)	// ### Qt 6: remove
 	QStringList text_list = text.split("+", QString::SkipEmptyParts);
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 	QStringList text_list = text.split("+", Qt::SkipEmptyParts);
 #endif
 	QModelIndexList match_index;

sources/ElementsCollection/elementslocation.cpp

@@ -754,7 +754,6 @@ QDebug operator<< (QDebug debug, const ElementsLocation &location)
 	QDebugStateSaver saver(debug);
 
 #if QT_VERSION >= 0x050400
-#pragma message("@TODO remove code for QT 5.04 or later")
 	debug.noquote();
 #else
 	debug.nospace();

sources/borderproperties.cpp

@@ -27,7 +27,7 @@
 	- 17 columns of 60.0 px wide by 20.0px high
 	- 8    lines of 80.0 px high by 20.0px wide
 
-	\~French Initialise un objet BorderProperties avec les proprietes par
+	Initialise un objet BorderProperties avec les proprietes par
 	defaut suivantes :
 	- 17 colonnes affichees de 60.0 px de large pour 20.0px de haut
 	- 8    lignes affichees de 80.0 px de haut pour 20.0px de large
@@ -53,11 +53,12 @@ BorderProperties::~BorderProperties() {
 
 /**
 	@brief BorderProperties::operator ==
-
-	\~ @param bp : Other BorderProperties container/class.
-	\~French Autre conteneur BorderProperties
-	\~ @return True if it and this container are identical, false otherwise.
-	\~French True si ip et ce conteneur sont identiques, false sinon
+	@param bp :
+	- other BorderProperties container/class
+	- autre conteneur BorderProperties
+	@return
+	- true if it and this container are identical, false otherwise
+	- true si ip et ce conteneur sont identiques, false sinon
 */
 bool BorderProperties::operator==(const BorderProperties &bp) {
 	return(
@@ -74,13 +75,12 @@ bool BorderProperties::operator==(const BorderProperties &bp) {
 
 /**
 	@brief BorderProperties::operator !=
-
-	\~ @param bp :
-	Other BorderProperties container/class.
-	\~French Autre conteneur BorderProperties
-	\~ @return
-	False if it and this container are identical, true otherwise.
-	\~French False si bp et ce conteneur sont identiques, true sinon
+	@param bp :
+	- other BorderProperties container/class
+	- autre conteneur BorderProperties
+	@return
+	- false if it and this container are identical, true otherwise
+	- false si bp et ce conteneur sont identiques, true sinon
 */
 bool BorderProperties::operator!=(const BorderProperties &bp) {
 	return(!(*this == bp));
@@ -88,12 +88,11 @@ bool BorderProperties::operator!=(const BorderProperties &bp) {
 
 /**
 	@brief BorderProperties::toXml
-	Exports dimensions as XML attributes added to element e.
-	\~French Exporte les dimensions sous formes d'attributs XML ajoutes a l'element e.
-
-	\~ @param e :
-	XML element to which attributes will be added
-	\~French Element XML auquel seront ajoutes des attributs
+	- Exports dimensions as XML attributes added to element e.
+	- Exporte les dimensions sous formes d'attributs XML ajoutes a l'element e.
+	@param e :
+	- XML element to which attributes will be added
+	- Element XML auquel seront ajoutes des attributs
 */
 void BorderProperties::toXml(QDomElement &e) const {
 	e.setAttribute("cols",        columns_count);
@@ -106,12 +105,11 @@ void BorderProperties::toXml(QDomElement &e) const {
 
 /**
 	@brief BorderProperties::fromXml
-	Import dimensions from XML attributes of element e
-	\~French Importe les dimensions a partir des attributs XML de l'element e
-
-	\~ @param e :
-	XML element whose attributes will be read
-	\~French Element XML dont les attributs seront lus
+	- Import dimensions from XML attributes of element e
+	- Importe les dimensions a partir des attributs XML de l'element e
+	@param e :
+	- XML element whose attributes will be read
+	- Element XML dont les attributs seront lus
 */
 void BorderProperties::fromXml(QDomElement &e) {
 	if (e.hasAttribute("cols"))        columns_count   = e.attribute("cols").toInt();
@@ -124,15 +122,14 @@ void BorderProperties::fromXml(QDomElement &e) {
 
 /**
 	@brief BorderProperties::toSettings
-	Export dimensions in a QSettings object.
-	\~French Exporte les dimensions dans une configuration.
-
-	\~ @param settings :
-	QSettings object to write
-	\~French Parametres a ecrire
-	\~ @param prefix :
-	prefix to be added before the names of the parameters
-	\~French prefixe a ajouter devant les noms des parametres
+	- Export dimensions in a QSettings object.
+	- Exporte les dimensions dans une configuration.
+	@param settings :
+	- QSettings object to write
+	- Parametres a ecrire
+	@param prefix :
+	- prefix to be added before the names of the parameters
+	- prefixe a ajouter devant les noms des parametres
 */
 void BorderProperties::toSettings(QSettings &settings, const QString &prefix) const {
 	settings.setValue(prefix + "cols",        columns_count);
@@ -145,12 +142,14 @@ void BorderProperties::toSettings(QSettings &settings, const QString &prefix) co
 
 /**
 	@brief BorderProperties::fromSettings
-	Import dimensions from a QSettings object.
-	\~French Importe les dimensions depuis une configuration.
-	\~ @param settings : QSettings object to read
-	\~French Parametres a lire
-	\~ @param prefix : prefix to be added before the names of the parameters
-	\~French prefixe a ajouter devant les noms des parametres
+	- Import dimensions from a QSettings object.
+	- Importe les dimensions depuis une configuration.
+	@param settings :
+	- QSettings object to read
+	- Parametres a lire
+	@param prefix :
+	- prefix to be added before the names of the parameters
+	- prefixe a ajouter devant les noms des parametres
 */
 void BorderProperties::fromSettings(QSettings &settings, const QString &prefix) {
 	columns_count   = settings.value(prefix + "cols",            columns_count).toInt();

sources/bordertitleblock.cpp

@@ -32,16 +32,9 @@
 #define MIN_ROW_HEIGHT 5.0
 
 /**
-	@brief BorderTitleBlock::BorderTitleBlock
-	Simple constructor:
-	build a border by recovering the dimensions
-	in the application configuration.
-
-	\~French Constructeur simple :
-	construit une bordure en recuperant les dimensions
+	Constructeur simple : construit une bordure en recuperant les dimensions
 	dans la configuration de l'application.
-	\~ @param parent :
-	\~French QObject parent de ce BorderTitleBlock
+	@param parent QObject parent de ce BorderTitleBlock
 */
 BorderTitleBlock::BorderTitleBlock(QObject *parent) :
 	QObject(parent)
@@ -68,119 +61,95 @@ BorderTitleBlock::BorderTitleBlock(QObject *parent) :
 }
 
 /**
-	@brief BorderTitleBlock::~BorderTitleBlock
-	\~French Destructeur - ne fait rien
+	Destructeur - ne fait rien
 */
 BorderTitleBlock::~BorderTitleBlock() {
 }
 
 /**
-	@brief BorderTitleBlock::titleBlockRect
-	@return the rectangle of the titleblock in scene coordinate.
+ * @brief BorderTitleBlock::titleBlockRect
+ * @return the rectangle of the titleblock in scene coordinate.
  */
 QRectF BorderTitleBlock::titleBlockRect() const
 {
 	if (m_edge == Qt::BottomEdge)
-		return QRectF(diagram_rect_.bottomLeft(),
-			      QSize(diagram_rect_.width(),
-				    m_titleblock_template_renderer -> height()
-				    ));
+		return QRectF(diagram_rect_.bottomLeft(), QSize(diagram_rect_.width(), m_titleblock_template_renderer -> height()));
 	else
-		return QRectF(diagram_rect_.topRight(),
-			      QSize(m_titleblock_template_renderer -> height(),
-				    diagram_rect_.height()
-				    ));
+		return QRectF(diagram_rect_.topRight(), QSize(m_titleblock_template_renderer -> height(), diagram_rect_.height()));
 }
 
-/**
-	@brief BorderTitleBlock::titleblockInformation
-	@return
-*/
 DiagramContext BorderTitleBlock::titleblockInformation() const {
 	return m_titleblock_template_renderer->context();
 }
 
 /**
-	@brief BorderTitleBlock::titleBlockRectForQPainter
-	@return The title block rect to use with the QPainter in the method draw.
-	The returned rect is alway horizontal
-	(like displayed at the bottom of rect) only the top left change of pos
-	according to the edge where the title block need to be displayed.
-	Rect according to edge:
-	Bottom : top left is at the bottom left edge of the diagram rect.
-	Right : top left is at the bottom right of diagram rect.
-	Befor use this rect you need to rotate the QPainter by -90°
-	for snap the rect at the right edge of diagram.
+ * @brief BorderTitleBlock::titleBlockRectForQPainter
+ * @return The title block rect to use with the QPainter in the method draw.
+ * The returned rect is alway horizontal (like displayed at the bottom of rect) only the top left change of pos
+ * according to the edge where the title block need to be displayed.
+ * Rect according to edge:
+ * Bottom : top left is at the bottom left edge of the diagram rect.
+ * Right : top left is at the bottom right of diagram rect. Befor use this rect you need to rotate the QPainter by -90°
+ * for snap the rect at the right edge of diagram.
  */
 QRectF BorderTitleBlock::titleBlockRectForQPainter() const
 {
-	//Rect at bottom have same position and dimension of displayed rect
-	if (m_edge == Qt::BottomEdge)
+	if (m_edge == Qt::BottomEdge) //Rect at bottom have same position and dimension of displayed rect
 		return titleBlockRect();
 	else
-		return QRectF (diagram_rect_.bottomRight(),
-			       QSize(diagram_rect_.height(),
-				     m_titleblock_template_renderer -> height()
-				     ));
+		return QRectF (diagram_rect_.bottomRight(), QSize(diagram_rect_.height(), m_titleblock_template_renderer -> height()));
 
 }
 
 /**
-	@brief BorderTitleBlock::borderAndTitleBlockRect
-	@return the bounding rectangle of diagram and titleblock.
-	It's like unite outsideBorderRect and titleBlockRect.
-	The rect is in scene coordinate
+ * @brief BorderTitleBlock::borderAndTitleBlockRect
+ * @return the bounding rectangle of diagram and titleblock.
+ * It's like unite outsideBorderRect and titleBlockRect.
+ * The rect is in scene coordinate
  */
 QRectF BorderTitleBlock::borderAndTitleBlockRect() const {
 	return diagram_rect_ | titleBlockRect();
 }
 
 /**
-	@brief BorderTitleBlock::columnsRect
-	@return The columns rect in scene coordinate.
-	If column is not displayed, return a null QRectF
+ * @brief BorderTitleBlock::columnsRect
+ * @return The columns rect in scene coordinate.
+ * If column is not displayed, return a null QRectF
  */
 QRectF BorderTitleBlock::columnsRect() const
 {
 	if (!display_columns_) return QRectF();
-	return QRectF (Diagram::margin,
-		       Diagram::margin,
-		       (columns_count_*columns_width_) + rows_header_width_,
-		       columns_header_height_);
+	return QRectF (Diagram::margin, Diagram::margin, (columns_count_*columns_width_) + rows_header_width_, columns_header_height_);
 }
 
 /**
-	@brief BorderTitleBlock::rowsRect
-	@return The rows rect in scene coordinate.
-	If row is not displayed, return a null QRectF
+ * @brief BorderTitleBlock::rowsRect
+ * @return The rows rect in scene coordinate.
+ * If row is not displayed, return a null QRectF
  */
 QRectF BorderTitleBlock::rowsRect() const
 {
 	if (!display_rows_) return QRectF();
-	return QRectF (Diagram::margin,
-		       Diagram::margin,
-		       rows_header_width_,
-		       (rows_count_*rows_height_) + columns_header_height_);
+	return QRectF (Diagram::margin, Diagram::margin, rows_header_width_, (rows_count_*rows_height_) + columns_header_height_);
 }
 
 /**
-	@brief BorderTitleBlock::outsideBorderRect
-	@return The rect of outside border (diagram with columns and rows)
-	The rect is in scene coordinate
+ * @brief BorderTitleBlock::outsideBorderRect
+ * @return The rect of outside border (diagram with columns and rows)
+ * The rect is in scene coordinate
  */
 QRectF BorderTitleBlock::outsideBorderRect() const
 {
-	return QRectF (Diagram::margin,
-		       Diagram::margin,
+	return QRectF (Diagram::margin, Diagram::margin,
 				  (columns_width_*columns_count_) + rows_header_width_,
 				  (rows_height_*rows_count_) + columns_header_height_);
 }
 
 /**
-	@brief BorderTitleBlock::insideBorderRect
-	@return The rect of the inside border, in other word, the drawing area.
-	This method take care about if rows or columns are displayed or not.
-	The rect is in scene coordinate
+ * @brief BorderTitleBlock::insideBorderRect
+ * @return The rect of the inside border, in other word, the drawing area.
+ * This method take care about if rows or columns are displayed or not.
+ * The rect is in scene coordinate
  */
 QRectF BorderTitleBlock::insideBorderRect() const
 {
@@ -196,7 +165,6 @@ QRectF BorderTitleBlock::insideBorderRect() const
 }
 
 /**
-	@brief BorderTitleBlock::titleBlockToXml
 	Exports the title block current values to XML.
 	@param xml_elmt the XML element attributes will be added to
 */
@@ -205,7 +173,6 @@ void BorderTitleBlock::titleBlockToXml(QDomElement &xml_elmt) {
 }
 
 /**
-	@brief BorderTitleBlock::titleBlockFromXml
 	Reads the title block values from XML.
 	@param xml_elmt the XML element values will be read from
 */
@@ -216,7 +183,6 @@ void BorderTitleBlock::titleBlockFromXml(const QDomElement &xml_elmt) {
 }
 
 /**
-	@brief BorderTitleBlock::borderToXml
 	Exports the border current settings to XML.
 	@param xml_elmt the XML element attributes will be added to
 */
@@ -234,7 +200,6 @@ void BorderTitleBlock::borderToXml(QDomElement &xml_elmt) {
 }
 
 /**
-	@brief BorderTitleBlock::borderFromXml
 	Reads the border settings from XML.
 	@param xml_elmt the XML element values will be read from
 */
@@ -248,8 +213,7 @@ void BorderTitleBlock::borderFromXml(const QDomElement &xml_elmt) {
 	double cols_width = xml_elmt.attribute("colsize").toDouble(&ok);
 	if (ok) setColumnsWidth(cols_width);
 	
-	// backward compatibility:
-	//	diagrams saved with 0.1 version have a "height" attribute
+	// backward compatibility: diagrams saved with 0.1 version have a "height" attribute
 	if (xml_elmt.hasAttribute("rows") && xml_elmt.hasAttribute("rowsize")) {
 		// rows counts
 		int rows_count = xml_elmt.attribute("rows").toInt(&ok);
@@ -272,9 +236,7 @@ void BorderTitleBlock::borderFromXml(const QDomElement &xml_elmt) {
 }
 
 /**
-	@brief BorderTitleBlock::exportTitleBlock
-	@return the properties of the titleblock
-	\~French les proprietes du cartouches
+	@return les proprietes du cartouches
 */
 TitleBlockProperties BorderTitleBlock::exportTitleBlock() {
 	TitleBlockProperties ip;
@@ -298,8 +260,8 @@ TitleBlockProperties BorderTitleBlock::exportTitleBlock() {
 }
 
 /**
-	@brief BorderTitleBlock::importTitleBlock
-	@param ip the new properties of titleblock
+ * @brief BorderTitleBlock::importTitleBlock
+ * @param ip the new properties of titleblock
  */
 void BorderTitleBlock::importTitleBlock(const TitleBlockProperties &ip) {
 	setAuthor(ip.author);
@@ -320,15 +282,12 @@ void BorderTitleBlock::importTitleBlock(const TitleBlockProperties &ip) {
 	additional_fields_ = ip.context;
 	
 	emit(needFolioData()); // Note: we expect additional data to be provided
-	// through setFolioData(),
-	// which in turn calls updateDiagramContextForTitleBlock().
+	// through setFolioData(), which in turn calls updateDiagramContextForTitleBlock().
 	emit(needTitleBlockTemplate(ip.template_name));
 }
 
 /**
-	@brief BorderTitleBlock::exportBorder
-	@return border properties
-	\~French les proprietes de la bordure
+	@return les proprietes de la bordure
 */
 BorderProperties BorderTitleBlock::exportBorder() {
 	BorderProperties bp;
@@ -344,9 +303,7 @@ BorderProperties BorderTitleBlock::exportBorder() {
 }
 
 /**
-	@brief BorderTitleBlock::importBorder
-	@param bp : the new properties of the border
-	\~French les nouvelles proprietes de la bordure
+	@param bp les nouvelles proprietes de la bordure
 */
 void BorderTitleBlock::importBorder(const BorderProperties &bp) {
 	setColumnsHeaderHeight(bp.columns_header_height);
@@ -360,7 +317,6 @@ void BorderTitleBlock::importBorder(const BorderProperties &bp) {
 }
 
 /**
-	@brief BorderTitleBlock::titleBlockTemplate
 	@return the titleblock template used to render the titleblock
 	@see TitleBlockTemplateRenderer::titleBlockTemplate()
 */
@@ -369,19 +325,14 @@ const TitleBlockTemplate *BorderTitleBlock::titleBlockTemplate() {
 }
 
 /**
-	@brief BorderTitleBlock::setTitleBlockTemplate
-	@param titleblock_template:
-	The new titleblock template to use to render the titleblock
+	@param titleblock_template The new titleblock template to use to render the titleblock
 	@see TitleBlockTemplateRenderer::setTitleBlockTemplate()
 */
-void BorderTitleBlock::setTitleBlockTemplate(
-		const TitleBlockTemplate *titleblock_template) {
-	m_titleblock_template_renderer -> setTitleBlockTemplate(
-				titleblock_template);
+void BorderTitleBlock::setTitleBlockTemplate(const TitleBlockTemplate *titleblock_template) {
+	m_titleblock_template_renderer -> setTitleBlockTemplate(titleblock_template);
 }
 
 /**
-	@brief BorderTitleBlock::titleBlockTemplateName
 	@return The name of the template used to render the titleblock.
 */
 QString BorderTitleBlock::titleBlockTemplateName() const {
@@ -390,11 +341,10 @@ QString BorderTitleBlock::titleBlockTemplateName() const {
 }
 
 /**
-	@brief BorderTitleBlock::titleBlockTemplateChanged
 	This slot may be used to inform this class that the given title block
-	template has changed.
-	The title block-dedicated rendering cache will thus be flushed.
-	@param template_name : Name of the title block template that has changed
+	template has changed. The title block-dedicated rendering cache will thus be
+	flushed.
+	@param template_name Name of the title block template that has changed
 */
 void BorderTitleBlock::titleBlockTemplateChanged(const QString &template_name) {
 	if (titleBlockTemplateName() != template_name) return;
@@ -402,18 +352,14 @@ void BorderTitleBlock::titleBlockTemplateChanged(const QString &template_name) {
 }
 
 /**
-	@brief BorderTitleBlock::titleBlockTemplateRemoved
 	This slot has to be used to inform this class that the given title block
 	template is about to be removed and is no longer accessible. This class
 	will either use the provided optional TitleBlockTemplate or the default
 	title block provided by QETApp::defaultTitleBlockTemplate()
-	@param removed_template_name :
-	Name of the title block template that has changed
+	@param template_name Name of the title block template that has changed
 	@param new_template (Optional) title block template to use instead
 */
-void BorderTitleBlock::titleBlockTemplateRemoved(
-		const QString &removed_template_name,
-		const TitleBlockTemplate *new_template) {
+void BorderTitleBlock::titleBlockTemplateRemoved(const QString &removed_template_name, const TitleBlockTemplate *new_template) {
 	if (titleBlockTemplateName() != removed_template_name) return;
 	
 	if (new_template) {
@@ -424,9 +370,7 @@ void BorderTitleBlock::titleBlockTemplateRemoved(
 }
 
 /**
-	@brief BorderTitleBlock::displayTitleBlock
-	@param di : true to display the title block, false otherwise
-	\~French true pour afficher le cartouche, false sinon
+	@param di true pour afficher le cartouche, false sinon
 */
 void BorderTitleBlock::displayTitleBlock(bool di) {
 	bool change = (di != display_titleblock_);
@@ -435,9 +379,7 @@ void BorderTitleBlock::displayTitleBlock(bool di) {
 }
 
 /**
-	@brief BorderTitleBlock::displayColumns
-	@param dc : true to display the column headers, false otherwise
-	\~French true pour afficher les entetes des colonnes, false sinon
+	@param dc true pour afficher les entetes des colonnes, false sinon
 */
 void BorderTitleBlock::displayColumns(bool dc) {
 	bool change = (dc != display_columns_);
@@ -446,9 +388,7 @@ void BorderTitleBlock::displayColumns(bool dc) {
 }
 
 /**
-	@brief BorderTitleBlock::displayRows
-	@param dr : true to display line headers, false otherwise
-	\~French true pour afficher les entetes des lignes, false sinon
+	@param dr true pour afficher les entetes des lignes, false sinon
 */
 void BorderTitleBlock::displayRows(bool dr) {
 	bool change = (dr != display_rows_);
@@ -457,13 +397,9 @@ void BorderTitleBlock::displayRows(bool dr) {
 }
 
 /**
-	@brief BorderTitleBlock::displayBorder
-	@param db : true to display the border of the diagram, false otherwise
-	\~French true pour afficher la bordure du schema, false sinon
-	\~ @note : if the border display is deactivated,
-	the rows and columns will not be drawn.
-	\~French si l'affichage de la bordure est ainsi desactivee,
-	les lignes et colonnes ne seront pas dessinees.
+	@param db true pour afficher la bordure du schema, false sinon
+	Note : si l'affichage de la bordure est ainsi desactivee, les lignes et
+	colonnes ne seront pas dessinees.
 */
 void BorderTitleBlock::displayBorder(bool db) {
 	bool change = (db != display_border_);
@@ -472,34 +408,29 @@ void BorderTitleBlock::displayBorder(bool db) {
 }
 
 /**
-	@brief BorderTitleBlock::slot_setAutoPageNum
-	@param pageAutoNum :
-	Set Page (Folio) Auto Num
+ * @brief BorderTitleBlock::slot_setAutoPageNum
+ * @param pageAutoNum
+ * Set Page (Folio) Auto Num
  */
 void BorderTitleBlock::slot_setAutoPageNum(QString pageAutoNum) {
 	btb_auto_page_num_=std::move(pageAutoNum);
 }
 
 /**
-	@brief BorderTitleBlock::updateRectangles
-	This method update the diagram rect according
-	to the value of rows and columns (number and size)
+ * @brief BorderTitleBlock::updateRectangles
+ * This method update the diagram rect according to the value of rows and columns (number and size)
  */
 void BorderTitleBlock::updateRectangles()
 {
 	QRectF previous_diagram = diagram_rect_;
-	diagram_rect_ = QRectF(Diagram::margin,
-			       Diagram::margin,
-			       diagramWidth(),
-			       diagramHeight());
-	if (diagram_rect_ != previous_diagram)
-		emit(borderChanged(previous_diagram, diagram_rect_));
+	diagram_rect_ = QRectF(Diagram::margin, Diagram::margin, diagramWidth(), diagramHeight());
+	if (diagram_rect_ != previous_diagram) emit(borderChanged(previous_diagram, diagram_rect_));
 }
 
 /**
-	@brief BorderTitleBlock::draw
-	Draw the border and the titleblock.
-	@param painter, QPainter to use for draw this.
+ * @brief BorderTitleBlock::draw
+ * Draw the border and the titleblock.
+ * @param painter, QPainter to use for draw this.
  */
 void BorderTitleBlock::draw(QPainter *painter)
 {
@@ -533,24 +464,16 @@ void BorderTitleBlock::draw(QPainter *painter)
 	if (display_border_ && display_columns_) {
 		for (int i = 1 ; i <= columns_count_ ; ++ i) {
 			QRectF numbered_rectangle = QRectF(
-				diagram_rect_.topLeft().x()
-					+ (rows_header_width_
-					   + ((i - 1) * columns_width_)),
+				diagram_rect_.topLeft().x() + (rows_header_width_ + ((i - 1) * columns_width_)),
 				diagram_rect_.topLeft().y(),
 				columns_width_,
 				columns_header_height_
 			);
 			painter -> drawRect(numbered_rectangle);
 			if (settings.value("border-columns_0", true).toBool()){
-			painter -> drawText(numbered_rectangle,
-					    Qt::AlignVCenter
-					    | Qt::AlignCenter,
-					    QString("%1").arg(i - 1));
+			painter -> drawText(numbered_rectangle, Qt::AlignVCenter | Qt::AlignCenter, QString("%1").arg(i - 1));
 			}else{
-			painter -> drawText(numbered_rectangle,
-					    Qt::AlignVCenter
-					    | Qt::AlignCenter,
-					    QString("%1").arg(i));
+			painter -> drawText(numbered_rectangle, Qt::AlignVCenter | Qt::AlignCenter, QString("%1").arg(i));
 			}
 		}
 	}
@@ -561,19 +484,12 @@ void BorderTitleBlock::draw(QPainter *painter)
 		for (int i = 1 ; i <= rows_count_ ; ++ i) {
 			QRectF lettered_rectangle = QRectF(
 				diagram_rect_.topLeft().x(),
-				diagram_rect_.topLeft().y()
-					+ (
-						columns_header_height_
-						+ ((i - 1)* rows_height_)
-						),
+				diagram_rect_.topLeft().y() + (columns_header_height_ + ((i - 1) * rows_height_)),
 				rows_header_width_,
 				rows_height_
 			);
 			painter -> drawRect(lettered_rectangle);
-			painter -> drawText(lettered_rectangle,
-					    Qt::AlignVCenter
-					    | Qt::AlignCenter,
-					    row_string);
+			painter -> drawText(lettered_rectangle, Qt::AlignVCenter | Qt::AlignCenter, row_string);
 			row_string = incrementLetters(row_string);
 		}
 	}
@@ -584,18 +500,14 @@ void BorderTitleBlock::draw(QPainter *painter)
 		if (m_edge == Qt::BottomEdge)
 		{
 			painter -> translate(tbt_rect.topLeft());
-			m_titleblock_template_renderer -> render(
-						painter,
-						tbt_rect.width());
+			m_titleblock_template_renderer -> render(painter, tbt_rect.width());
 			painter -> translate(-tbt_rect.topLeft());
 		}
 		else
 		{
 			painter->translate(tbt_rect.topLeft());
 			painter->rotate(-90);
-			m_titleblock_template_renderer -> render(
-						painter,
-						tbt_rect.width());
+			m_titleblock_template_renderer -> render(painter, tbt_rect.width());
 			painter->rotate(90);
 			painter -> translate(-tbt_rect.topLeft());
 		}
@@ -604,20 +516,7 @@ void BorderTitleBlock::draw(QPainter *painter)
 	painter -> restore();
 }
 
-/**
- * @brief BorderTitleBlock::drawDxf
- * @param width
- * @param height
- * @param keep_aspect_ratio
- * @param file_path
- * @param color
- */
-void BorderTitleBlock::drawDxf(
-		int width,
-		int height,
-		bool keep_aspect_ratio,
-		QString &file_path,
-		int color) {
+void BorderTitleBlock::drawDxf(int width, int height, bool keep_aspect_ratio, QString &file_path, int color) {
 	Q_UNUSED (width); Q_UNUSED (height); Q_UNUSED (keep_aspect_ratio);
 
 	// Transform to DXF scale.
@@ -626,7 +525,6 @@ void BorderTitleBlock::drawDxf(
 	rows_header_width_     *= Createdxf::xScale;
 	columns_width_         *= Createdxf::xScale;
 
-	// draw the empty box that appears as soon as there is a header
 	// dessine la case vide qui apparait des qu'il y a un entete
 	if (display_border_ &&
 		(display_columns_ ||
@@ -635,10 +533,7 @@ void BorderTitleBlock::drawDxf(
 		Createdxf::drawRectangle(
 			file_path,
 			double(diagram_rect_.topLeft().x()) * Createdxf::xScale,
-			Createdxf::sheetHeight
-					- double(diagram_rect_.topLeft().y())
-					* Createdxf::yScale
-					- columns_header_height_,
+			Createdxf::sheetHeight - double(diagram_rect_.topLeft().y()) * Createdxf::yScale - columns_header_height_,
 			rows_header_width_,
 			columns_header_height_,
 			color
@@ -647,7 +542,6 @@ void BorderTitleBlock::drawDxf(
 
 	QSettings settings;
 	
-	// draw the numbering of the columns
 	// dessine la numerotation des colonnes
 	if (display_border_ &&
 		display_columns_) {
@@ -655,74 +549,34 @@ void BorderTitleBlock::drawDxf(
 			double xCoord = diagram_rect_.topLeft().x() +
 					(rows_header_width_ + ((i - 1) *
 					 columns_width_));
-			double yCoord = Createdxf::sheetHeight
-					- diagram_rect_.topLeft().y()
-					- columns_header_height_;
+			double yCoord = Createdxf::sheetHeight - diagram_rect_.topLeft().y() - columns_header_height_;
 			double recWidth = columns_width_;
 			double recHeight = columns_header_height_;
-			Createdxf::drawRectangle(file_path, xCoord, yCoord,
-						 recWidth, recHeight, color);
+			Createdxf::drawRectangle(file_path, xCoord, yCoord, recWidth, recHeight, color);
 			if (settings.value("border-columns_0", true).toBool()){
-			Createdxf::drawTextAligned(file_path,
-						   QString::number(i - 1),
-						   xCoord,
-						   yCoord + recHeight*0.5,
-						   recHeight*0.7,
-						   0,
-						   0,
-						   1,
-						   2,
-						   xCoord+recWidth/2,
-						   color,
-						   0);
+			Createdxf::drawTextAligned(file_path, QString::number(i - 1), xCoord,
+									   yCoord + recHeight*0.5, recHeight*0.7, 0, 0, 1, 2, xCoord+recWidth/2, color, 0);
 			}else{
-			Createdxf::drawTextAligned(file_path,
-						   QString::number(i),
-						   xCoord,
-						   yCoord + recHeight*0.5,
-						   recHeight*0.7,
-						   0,
-						   0,
-						   1,
-						   2,
-						   xCoord+recWidth/2,
-						   color,
-						   0);
+			Createdxf::drawTextAligned(file_path, QString::number(i), xCoord,
+									   yCoord + recHeight*0.5, recHeight*0.7, 0, 0, 1, 2, xCoord+recWidth/2, color, 0);
 			}
 		}
 	}
 
-	// draw line numbering
 	// dessine la numerotation des lignes
+
 	if (display_border_ && display_rows_) {
 		QString row_string("A");
 		for (int i = 1 ; i <= rows_count_ ; ++ i) {
-			double xCoord = diagram_rect_.topLeft().x()
-					* Createdxf::xScale;
-			double yCoord = Createdxf::sheetHeight
-					- diagram_rect_.topLeft().y()
-					*Createdxf::yScale
-					- (
-						columns_header_height_
-						+ ((i - 1)
-						   * rows_height_) )
+			double xCoord = diagram_rect_.topLeft().x() * Createdxf::xScale;
+			double yCoord = Createdxf::sheetHeight - diagram_rect_.topLeft().y()*Createdxf::yScale
+							- (columns_header_height_ + ((i - 1) * rows_height_))
 							- rows_height_;
 			double recWidth = rows_header_width_;
 			double recHeight = rows_height_;
-			Createdxf::drawRectangle(file_path, xCoord, yCoord,
-						 recWidth, recHeight, color);
-			Createdxf::drawTextAligned(file_path,
-						   row_string,
-						   xCoord,
-						   yCoord + recHeight*0.5,
-						   recWidth*0.7,
-						   0,
-						   0,
-						   1,
-						   2,
-						   xCoord+recWidth/2,
-						   color,
-						   0);
+			Createdxf::drawRectangle(file_path, xCoord, yCoord, recWidth, recHeight, color);
+			Createdxf::drawTextAligned(file_path, row_string, xCoord,
+									   yCoord + recHeight*0.5, recWidth*0.7, 0, 0, 1, 2, xCoord+recWidth/2, color, 0);
 			row_string = incrementLetters(row_string);
 		}
 	}
@@ -731,10 +585,7 @@ void BorderTitleBlock::drawDxf(
 	if (display_titleblock_) {
 		//qp -> translate(titleblock_rect_.topLeft());
 		QRectF rect = titleBlockRect();
-		m_titleblock_template_renderer -> renderDxf(rect,
-							    rect.width(),
-							    file_path,
-							    color);
+		m_titleblock_template_renderer -> renderDxf(rect, rect.width(), file_path, color);
 		//qp -> translate(-titleblock_rect_.topLeft());
 	}
 
@@ -747,17 +598,11 @@ void BorderTitleBlock::drawDxf(
 }
 
 /**
-	@brief BorderTitleBlock::setColumnsCount
-	Allows you to change the number of columns.
-	If this number of columns is less than the minimum required,
-	it is this minimum which is used.
-
-	\~French Permet de changer le nombre de colonnes.
-	Si ce nombre de colonnes est inferieur au minimum requis,
-	c'est ce minimum qui est utilise.
-	\~ @param nb_c : new number of columns
-	\~French nouveau nombre de colonnes
-	\~ @see minNbColumns()
+	Permet de changer le nombre de colonnes.
+	Si ce nombre de colonnes est inferieur au minimum requis, c'est ce minimum
+	qui est utilise.
+	@param nb_c nouveau nombre de colonnes
+	@see minNbColumns()
 */
 void BorderTitleBlock::setColumnsCount(int nb_c) {
 	if (nb_c == columnsCount()) return;
@@ -766,17 +611,11 @@ void BorderTitleBlock::setColumnsCount(int nb_c) {
 }
 
 /**
-	@brief BorderTitleBlock::setColumnsWidth
-	Change the width of the columns.
-	If the width indicated is less than the minimum required,
-	it is this minimum which is used.
-
-	\~French Change la largeur des colonnes.
-	Si la largeur indiquee est inferieure au minimum requis,
-	c'est ce minimum qui est utilise.
-	\~ @param new_cw : new column width
-	\~French nouvelle largeur des colonnes
-	\~ @see minColumnsWidth()
+	Change la largeur des colonnes.
+	Si la largeur indiquee est inferieure au minimum requis, c'est ce minimum
+	qui est utilise.
+	@param new_cw nouvelle largeur des colonnes
+	@see minColumnsWidth()
 */
 void BorderTitleBlock::setColumnsWidth(const qreal &new_cw) {
 	if (new_cw == columnsWidth()) return;
@@ -785,14 +624,9 @@ void BorderTitleBlock::setColumnsWidth(const qreal &new_cw) {
 }
 
 /**
-	@brief BorderTitleBlock::setColumnsHeaderHeight
-	Change the height of the headers containing the column numbers.
-	This must remain between 5 and 50 px.
-
-	\~French Change la hauteur des en-tetes contenant les numeros de colonnes.
-	Celle-ci doit rester comprise entre 5 et 50 px.
-	\~ @param new_chh : new height of column headers
-	\~French nouvelle hauteur des en-tetes de colonnes
+	Change la hauteur des en-tetes contenant les numeros de colonnes. Celle-ci
+	doit rester comprise entre 5 et 50 px.
+	@param new_chh nouvelle hauteur des en-tetes de colonnes
 */
 void BorderTitleBlock::setColumnsHeaderHeight(const qreal &new_chh) {
 	columns_header_height_ = qBound(qreal(5.0), new_chh, qreal(50.0));
@@ -800,17 +634,11 @@ void BorderTitleBlock::setColumnsHeaderHeight(const qreal &new_chh) {
 }
 
 /**
-	@brief BorderTitleBlock::setRowsCount
-	Allows you to change the number of lines.
-	If this number of lines is lower than the minimum required,
-	this function does nothing
-
-	\~French Permet de changer le nombre de lignes.
-	Si ce nombre de lignes est inferieur au minimum requis,
-	cette fonction ne fait rien
-	\~ @param nb_r : new number of lines
-	\~French nouveau nombre de lignes
-	\~ @see minNbRows()
+	Permet de changer le nombre de lignes.
+	Si ce nombre de lignes est inferieur au minimum requis, cette fonction ne
+	fait rien
+	@param nb_r nouveau nombre de lignes
+	@see minNbRows()
 */
 void BorderTitleBlock::setRowsCount(int nb_r) {
 	if (nb_r == rowsCount()) return;
@@ -819,17 +647,11 @@ void BorderTitleBlock::setRowsCount(int nb_r) {
 }
 
 /**
-	@brief BorderTitleBlock::setRowsHeight
-	Change the height of the lines.
-	If the indicated height is lower than the minimum required,
-	it is this minimum which is used.
-
-	\~French Change la hauteur des lignes.
-	Si la hauteur indiquee est inferieure au minimum requis,
-	c'est ce minimum qui est utilise.
-	\~ @param new_rh : new row height
-	\~French nouvelle hauteur des lignes
-	\~ @see minRowsHeight()
+	Change la hauteur des lignes.
+	Si la hauteur indiquee est inferieure au minimum requis, c'est ce minimum
+	qui est utilise.
+	@param new_rh nouvelle hauteur des lignes
+	@see minRowsHeight()
 */
 void BorderTitleBlock::setRowsHeight(const qreal &new_rh) {
 	if (new_rh == rowsHeight()) return;
@@ -838,14 +660,9 @@ void BorderTitleBlock::setRowsHeight(const qreal &new_rh) {
 }
 
 /**
-	@brief BorderTitleBlock::setRowsHeaderWidth
-	Change the width of the headers containing the line numbers.
-	This must remain between 5 and 50 px.
-
-	\~French Change la largeur des en-tetes contenant les numeros de lignes.
-	Celle-ci doit rester comprise entre 5 et 50 px.
-	\~ @param new_rhw : new width of line headers
-	\~French nouvelle largeur des en-tetes des lignes
+	Change la largeur des en-tetes contenant les numeros de lignes. Celle-ci
+	doit rester comprise entre 5 et 50 px.
+	@param new_rhw nouvelle largeur des en-tetes des lignes
 */
 void BorderTitleBlock::setRowsHeaderWidth(const qreal &new_rhw) {
 	rows_header_width_ = qBound(qreal(5.0), new_rhw, qreal(50.0));
@@ -853,26 +670,19 @@ void BorderTitleBlock::setRowsHeaderWidth(const qreal &new_rhw) {
 }
 
 /**
-	@brief BorderTitleBlock::setDiagramHeight
-	This method tries to get as close as possible to the given height
-	as a parameter by modifying the number of rows in progress.
-
-	\~French Cette methode essaye de se rapprocher le plus possible de la
-	hauteur donnee en parametre en modifiant le nombre de lignes en cours.
-	\~ @param height :
+	Cette methode essaye de se rapprocher le plus possible de la hauteur donnee
+	en parametre en modifiant le nombre de lignes en cours.
 */
 void BorderTitleBlock::setDiagramHeight(const qreal &height) {
-	//          size of rows to use = rows_height
 	// taille des lignes a utiliser = rows_height
 	setRowsCount(qRound(ceil(height / rows_height_)));
 }
 
 /**
-	@brief BorderTitleBlock::convertPosition
-	Convert a Point in cartesian coordinate (x : 12.5, 56.9)
-	to a point in grid coordinate (ex : B2)
-	@param pos : position to convert
-	@return the converted point in grid coordinate.
+ * @brief BorderTitleBlock::convertPosition
+ * Convert a Point in cartesian coordinate (x : 12.5, 56.9) to a point in grid coordinate (ex : B2)
+ * @param pos : position to convert
+ * @return the converted point in grid coordinate.
  */
 DiagramPosition BorderTitleBlock::convertPosition(const QPointF &pos)
 {
@@ -891,24 +701,24 @@ DiagramPosition BorderTitleBlock::convertPosition(const QPointF &pos)
 }
 
 /**
-	@brief BorderTitleBlock::setAuthor
-	@param author the new value of the "Author" field
+ * @brief BorderTitleBlock::setAuthor
+ * @param author the new value of the "Author" field
  */
 void BorderTitleBlock::setAuthor(const QString &author) {
 	btb_author_ = author;
 }
 
 /**
-	@brief BorderTitleBlock::setDate
-	@param date the new value of the "Date" field
+ * @brief BorderTitleBlock::setDate
+ * @param date the new value of the "Date" field
  */
 void BorderTitleBlock::setDate(const QDate &date) {
 	btb_date_ = date;
 }
 
 /**
-	@brief BorderTitleBlock::setTitle
-	@param title the new value of the "Title" field
+ * @brief BorderTitleBlock::setTitle
+ * @param title the new value of the "Title" field
  */
 void BorderTitleBlock::setTitle(const QString &title)
 {
@@ -920,8 +730,8 @@ void BorderTitleBlock::setTitle(const QString &title)
 }
 
 /**
-	@brief BorderTitleBlock::setFolio
-	@param folio the new value of the "Folio" field
+ * @brief BorderTitleBlock::setFolio
+ * @param folio the new value of the "Folio" field
  */
 void BorderTitleBlock::setFolio(const QString &folio)
 {
@@ -930,14 +740,12 @@ void BorderTitleBlock::setFolio(const QString &folio)
 }
 
 /**
-	@brief BorderTitleBlock::updateDiagramContextForTitleBlock
-	Update the informations given to the titleblock template
-	by regenerating a DiagramContext object.
-	@param initial_context :
-	Base diagram context that will be overridden by diagram-wide values
+	Update the informations given to the titleblock template by regenerating a
+	DiagramContext object.
+	@param initial_context Base diagram context that will be overridden by
+	diagram-wide values
 */
-void BorderTitleBlock::updateDiagramContextForTitleBlock(
-		const DiagramContext &initial_context) {
+void BorderTitleBlock::updateDiagramContextForTitleBlock(const DiagramContext &initial_context) {
 	// Our final DiagramContext is the initial one (which is supposed to bring
 	// project-wide properties), overridden by the "additional fields" one...
 	DiagramContext context = initial_context;
@@ -947,8 +755,7 @@ void BorderTitleBlock::updateDiagramContextForTitleBlock(
 	
 	// ... overridden by the historical and/or dynamically generated fields
 	context.addValue("author",      btb_author_);
-	context.addValue("date",        btb_date_.toString(
-				 Qt::SystemLocaleShortDate));
+	context.addValue("date",        btb_date_.toString(Qt::SystemLocaleShortDate));
 	context.addValue("title",       btb_title_);
 	context.addValue("filename",    btb_filename_);
 	context.addValue("plant",     btb_plant_);
@@ -965,25 +772,14 @@ void BorderTitleBlock::updateDiagramContextForTitleBlock(
 	m_titleblock_template_renderer -> setContext(context);
 }
 
-/**
-	@brief BorderTitleBlock::incrementLetters
-	increments string with Letters A to Z
-	@param string
-	@return string ++Letters
-	eg:
-	- A-> B
-	- Z -> AA
-*/
 QString BorderTitleBlock::incrementLetters(const QString &string) {
 	if (string.isEmpty()) {
 		return("A");
 	} else {
-		// separate previous digits from last digit
 		// separe les digits precedents du dernier digit
 		QString first_digits(string.left(string.count() - 1));
 		QChar last_digit(string.at(string.count() - 1));
 		if (last_digit != 'Z') {
-			// increments the last digit
 			// incremente le dernier digit
 			last_digit = last_digit.toLatin1() + 1;
 			return(first_digits + QString(last_digit));
@@ -994,32 +790,17 @@ QString BorderTitleBlock::incrementLetters(const QString &string) {
 }
 
 /**
-	@brief BorderTitleBlock::setFolioData
-
-	\~ @param index : schema number (from 1 to total)
-	\~French numero du schema (de 1 a total)
-
-	\~ @param total : total number of diagrams in the project
-	\~French nombre total de schemas dans le projet
-
-	\~ @param autonum :
-
-	\~ @param project_properties : Project-wide properties,
-	to be merged with diagram-wide ones.
+	@param index numero du schema (de 1 a total)
+	@param total nombre total de schemas dans le projet
+	@param project_properties Project-wide properties, to be merged with diagram-wide ones.
 */
-void BorderTitleBlock::setFolioData(
-		int index,
-		int total,
-		const QString& autonum,
-		const DiagramContext &project_properties) {
+void BorderTitleBlock::setFolioData(int index, int total, const QString& autonum, const DiagramContext &project_properties) {
 	if (index < 1 || total < 1 || index > total) return;
 	
-	// memorize information
 	// memorise les informations
 	folio_index_ = index;
 	folio_total_ = total;
 	
-	// regenerate the content of the folio field
 	// regenere le contenu du champ folio
 	btb_final_folio_ = btb_folio_;
 
@@ -1030,60 +811,61 @@ void BorderTitleBlock::setFolioData(
 	btb_final_folio_.replace("%id",    QString::number(folio_index_));
 	btb_final_folio_.replace("%total", QString::number(folio_total_));
 
+
 	updateDiagramContextForTitleBlock(project_properties);
 }
 
 /**
-	@brief BorderTitleBlock::setPlant
-	@param plant the new value of the "plant" field
+ * @brief BorderTitleBlock::setPlant
+ * @param plant the new value of the "plant" field
  */
 void BorderTitleBlock::setPlant(const QString &plant) {
 	btb_plant_ = plant;
 }
 
 /**
-	@brief BorderTitleBlock::setLocMach
-	@param locmach the new value of the "locmach" field
+ * @brief BorderTitleBlock::setLocMach
+ * @param locmach the new value of the "locmach" field
  */
 void BorderTitleBlock::setLocMach(const QString &locmach) {
 	btb_locmach_ = locmach;
 }
 
 /**
-	@brief BorderTitleBlock::setIndicerev
-	@param indexrev the new value of the "indexrev" field
+ * @brief BorderTitleBlock::setIndicerev
+ * @param indexrev the new value of the "indexrev" field
  */
 void BorderTitleBlock::setIndicerev(const QString &indexrev) {
 	btb_indexrev_ = indexrev;
 }
 
 /**
-	@brief BorderTitleBlock::setFileName
-	@param filename the new value of the "filename" field
+ * @brief BorderTitleBlock::setFileName
+ * @param filename the new value of the "filename" field
  */
 void BorderTitleBlock::setFileName(const QString &filename) {
 	btb_filename_ = filename;
 }
 
 /**
-	@brief BorderTitleBlock::setVersion
-	@param version the new value of the "version" field
+ * @brief BorderTitleBlock::setVersion
+ * @param version the new value of the "version" field
  */
 void BorderTitleBlock::setVersion(const QString &version) {
 	btb_version_ = version;
 }
 
 /**
-	@brief BorderTitleBlock::setAutoPageNum
-	@param auto_page_num the new value of the "auto_page_num" field
+ * @brief BorderTitleBlock::setAutoPageNum
+ * @param auto_page_num the new value of the "auto_page_num" field
  */
 void BorderTitleBlock::setAutoPageNum(const QString &auto_page_num) {
 	btb_auto_page_num_ = auto_page_num;
 }
 
 /**
-	@brief BorderTitleBlock::setPreviousFolioNum
-	@param previous the new value of the "previous-folio-num" field
+ * @brief BorderTitleBlock::setPreviousFolioNum
+ * @param previous the new value of the "previous-folio-num" field
  */
 void BorderTitleBlock::setPreviousFolioNum(const QString &previous)
 {
@@ -1094,8 +876,8 @@ void BorderTitleBlock::setPreviousFolioNum(const QString &previous)
 }
 
 /**
-	@brief BorderTitleBlock::setNextFolioNum
-	@param next the new value of the "next-folio-num" field
+ * @brief BorderTitleBlock::setNextFolioNum
+ * @param next the new value of the "next-folio-num" field
  */
 void BorderTitleBlock::setNextFolioNum(const QString &next)
 {

sources/bordertitleblock.h

@@ -29,7 +29,6 @@ class DiagramPosition;
 class TitleBlockTemplate;
 class TitleBlockTemplateRenderer;
 /**
-	@brief The BorderTitleBlock class
 	This class represents the border and the titleblock which frame a
 	particular electric diagram.
 */
@@ -56,11 +55,9 @@ class BorderTitleBlock : public QObject
 			/// @return the columns width, in pixels
 		qreal columnsWidth() const { return(columns_width_); }
 			/// @return the total width of all columns, headers excluded
-		qreal columnsTotalWidth() const {
-			return(columns_count_ * columns_width_); }
+		qreal columnsTotalWidth() const { return(columns_count_ * columns_width_); }
 			/// @return the column headers height, in pixels
-		qreal columnsHeaderHeight() const {
-			return(columns_header_height_); }
+		qreal columnsHeaderHeight() const { return(columns_header_height_); }
 	
 		//ROWS
 			/// @return the number of rows
@@ -68,26 +65,15 @@ class BorderTitleBlock : public QObject
 			/// @return the rows height, in pixels
 		qreal rowsHeight() const { return(rows_height_); }
 			/// @return the total height of all rows, headers excluded
-		qreal rowsTotalHeight() const {
-			return(rows_count_ * rows_height_); }
+		qreal rowsTotalHeight() const { return(rows_count_ * rows_height_); }
 			/// @return la rows header width, in pixels
 		qreal rowsHeaderWidth() const { return(rows_header_width_); }
 	
 		// border - title block = diagram
-		/**
-			@brief diagramWidth
-			@return the diagram width,
-			i.e. the width of the border without title block
-		*/
-		qreal diagramWidth() const {
-			return(columnsTotalWidth() + rowsHeaderWidth()); }
-		/**
-			@brief diagramHeight
-			@return the diagram height,
-			i.e. the height of the border without title block
-		*/
-		qreal diagramHeight() const {
-			return(rowsTotalHeight() + columnsHeaderHeight()); }
+			/// @return the diagram width, i.e. the width of the border without title block
+		qreal diagramWidth() const { return(columnsTotalWidth() + rowsHeaderWidth()); }
+			/// @return the diagram height, i.e. the height of the border without title block
+		qreal diagramHeight() const { return(rowsTotalHeight() + columnsHeaderHeight()); }
 
 		QRectF titleBlockRect () const;
 
@@ -124,8 +110,7 @@ class BorderTitleBlock : public QObject
 			/// @return the value of the title block Additional Fields
 		QString version() const { return(btb_version_); }
 			/// @return the value of the title block Additional Fields
-		DiagramContext additionalFields() const {
-			return (additional_fields_); }
+		DiagramContext additionalFields() const { return (additional_fields_); }
 			/// @return the value of the title block
 		QString autoPageNum() const { return(btb_auto_page_num_); }
 			/// @return the value of the total number of folios
@@ -133,13 +118,10 @@ class BorderTitleBlock : public QObject
 	
 			// methods to get display options
 			/// @return true si le cartouche est affiche, false sinon
-		bool titleBlockIsDisplayed() const {
-			return(display_titleblock_); }
-		/// @return true si les entetes des colonnes sont affiches,
-		/// false sinon
+		bool titleBlockIsDisplayed() const { return(display_titleblock_); }
+			/// @return true si les entetes des colonnes sont affiches, false sinon
 		bool columnsAreDisplayed() const { return(display_columns_); }
-		/// @return true si les entetes des lignes sont affiches,
-		/// false sinon
+			/// @return true si les entetes des lignes sont affiches, false sinon
 		bool rowsAreDisplayed() const { return(display_rows_); }
 			/// @return true si la bordure est affichee, false sinon
 		bool borderIsDisplayed() const { return(display_border_); }
@@ -160,8 +142,7 @@ class BorderTitleBlock : public QObject
 		void setDate(const QDate &date);
 		void setTitle(const QString &title);
 		void setFolio(const QString &folio);
-		void setFolioData(int, int, const QString& = nullptr,
-				  const DiagramContext & = DiagramContext());
+		void setFolioData(int, int, const QString& = nullptr, const DiagramContext & = DiagramContext());
 		void setPlant(const QString &plant);
 		void setLocMach(const QString &locmach);
 		void setIndicerev(const QString &indexrev);
@@ -187,9 +168,7 @@ class BorderTitleBlock : public QObject
 		
 	public slots:
 		void titleBlockTemplateChanged(const QString &);
-		void titleBlockTemplateRemoved(
-				const QString &,
-				const TitleBlockTemplate * = nullptr);
+		void titleBlockTemplateRemoved(const QString &, const TitleBlockTemplate * = nullptr);
 		
 			// methods to set display options
 		void displayTitleBlock(bool);
@@ -200,25 +179,21 @@ class BorderTitleBlock : public QObject
 	
 	private:
 		void updateRectangles();
-		void updateDiagramContextForTitleBlock(
-				const DiagramContext & = DiagramContext());
+		void updateDiagramContextForTitleBlock(const DiagramContext & = DiagramContext());
 		QString incrementLetters(const QString &);
 	
 		signals:
 			/**
-			@brief borderChanged
 				Signal emitted after the border has changed
 				@param old_border Former border
 				@param new_border New border
 			*/
 		void borderChanged(QRectF old_border, QRectF new_border);
 			/**
-			@brief displayChanged
 				Signal emitted after display options have changed
 			*/
 		void displayChanged();
 			/**
-			@brief diagramTitleChanged
 				Signal emitted after the title has changed
 			*/
 		void diagramTitleChanged(const QString &);
@@ -228,53 +203,48 @@ class BorderTitleBlock : public QObject
 			*/
 		void titleBlockFolioChanged(const QString &);
 			/**
-			@brief needFolioData
-			Signal emitted when the title block
-			requires its data to be updated
-			in order to generate the folio field.
+				Signal emitted when the title block requires its data to be updated in order
+				to generate the folio field.
 			*/
 		void needFolioData();
 			/**
-			@brief needTitleBlockTemplate
-			Signal emitted when this object needs to
-			set a specific title block template.
-			This object cannot handle the job
-			since it does not know of its parent project.
+				Signal emitted when this object needs to set a specific title block
+				template. This object cannot handle the job since it does not know of
+				its parent project.
 			*/
 		void needTitleBlockTemplate(const QString &);
 	
 		// attributes
 	private:
 			// titleblock basic data
-		QString btb_author_;        ///< titleblock author
-		QDate   btb_date_;          ///< titleblock date
-		QString btb_title_;         ///< titleblock title
-		QString btb_folio_;         ///< titleblock folio
-		QString btb_plant_;         ///< titleblock plant
-		QString btb_locmach_;       ///< titleblock locmach
-		QString btb_indexrev_;      ///< titleblock index rev
-		QString btb_final_folio_;   ///< titleblock final folio
-		QString btb_auto_page_num_; ///< titleblock auto page num
-		int folio_index_;           ///< titleblock index
-		int folio_total_;           ///< titleblock total
-		QString btb_filename_;      ///< titleblock filename
-		QString btb_version_;       ///< titleblock version
-		/// titleblock additional fields
+		QString btb_author_;
+		QDate   btb_date_;
+		QString btb_title_;
+		QString btb_folio_;
+		QString btb_plant_;
+		QString btb_locmach_;
+		QString btb_indexrev_;
+		QString btb_final_folio_;
+		QString btb_auto_page_num_;
+		int folio_index_;
+		int folio_total_;
+		QString btb_filename_;
+		QString btb_version_;
 		DiagramContext additional_fields_;
-		Qt::Edge m_edge;              ///< titleblock edge
-		QString m_next_folio_num;     ///< titleblock next folio num
-		QString m_previous_folio_num; ///< titleblock previous folio num
+		Qt::Edge m_edge;
+		QString m_next_folio_num,
+				m_previous_folio_num;
 	
 			// border dimensions (rows and columns)
 			// columns: number and dimensions
-		int columns_count_;           ///< columns count
-		qreal columns_width_;         ///< columns width
-		qreal columns_header_height_; ///< columns header height
+		int columns_count_;
+		qreal columns_width_;
+		qreal columns_header_height_;
 	
 			// rows: number and dimensions
-		int rows_count_;          ///< rows count
-		qreal rows_height_;       ///< rows height
-		qreal rows_header_width_; ///< rows header width
+		int rows_count_;
+		qreal rows_height_;
+		qreal rows_header_width_;
 	
 			// title block dimensions
 		qreal titleblock_height_;

sources/conductorautonumerotation.cpp

@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2020 The QElectroTech team
+	Copyright 2006-2014 The QElectroTech team
 	This file is part of QElectroTech.
 
 	QElectroTech is free software: you can redistribute it and/or modify
@@ -26,23 +26,16 @@
 #include "assignvariables.h"
 
 /**
-	@brief ConductorAutoNumerotation::ConductorAutoNumerotation
-	Constructor of autonum, after create a class,
-	call numerate to apply the autonum.
-	When autonum is applyed,
-	they do with an undo command added to the stack of diagram.
-	If you give a parent_undo at constructor,
-	the undo command create in this class have parent_undo for parent,
-	and wasn't added to the stack of diagram
-	(it's the responsabillty of the parent_undo)
-	@param conductor   : the conductor to apply automatic numerotation
-	@param diagram     : the diagram of conductor
-	@param parent_undo : parent undo command
+ * @brief ConductorAutoNumerotation::ConductorAutoNumerotation
+ * Constructor of autonum, after create a class, call numerate to apply the autonum.
+ * When autonum is applyed, they do with an undo command added to the stack of diagram.
+ * If you give a parent_undo at constructor, the undo command create in this class have parent_undo for parent,
+ * and wasn't added to the stack of diagram (it's the responsabillty of the parent_undo)
+ * @param conductor   : the conductor to apply automatic numerotation
+ * @param diagram     : the diagram of conductor
+ * @param parent_undo : parent undo command
  */
-ConductorAutoNumerotation::ConductorAutoNumerotation(
-		Conductor *conductor,
-		Diagram *diagram,
-		QUndoCommand *parent_undo) :
+ConductorAutoNumerotation::ConductorAutoNumerotation(Conductor *conductor, Diagram *diagram, QUndoCommand *parent_undo) :
 	m_diagram      (diagram),
 	m_conductor     (conductor),
 	conductor_list (conductor -> relatedPotentialConductors().values()),
@@ -50,21 +43,18 @@ ConductorAutoNumerotation::ConductorAutoNumerotation(
 {}
 
 /**
-	@brief ConductorAutoNumerotation::numerate
-	execute the automatic numerotation
+ * @brief ConductorAutoNumerotation::numerate
+ * execute the automatic numerotation
  */
 void ConductorAutoNumerotation::numerate() {
 	if (!m_conductor) return;
 	if (conductor_list.size() >= 1 ) numeratePotential();
-	else if (m_conductor -> properties().type == ConductorProperties::Multi)
-		numerateNewConductor();
+	else if (m_conductor -> properties().type == ConductorProperties::Multi) numerateNewConductor();
 }
 
 /**
-	@brief ConductorAutoNumerotation::applyText
-	apply the text @t to @conductor_
-	and all conductors at the same potential
-	@param t : Conductor text
+ * @brief ConductorAutoNumerotation::applyText
+ * apply the text @t to @conductor_ and all conductors at the same potential
  */
 void ConductorAutoNumerotation::applyText(const QString& t)
 {
@@ -80,36 +70,20 @@ void ConductorAutoNumerotation::applyText(const QString& t)
 
 	if (m_parent_undo)
 	{
-		new QPropertyUndoCommand(
-					m_conductor,
-					"properties",
-					old_value,
-					new_value,
-					m_parent_undo);
+		new QPropertyUndoCommand(m_conductor, "properties", old_value, new_value, m_parent_undo);
 		undo = m_parent_undo;
 	}
 	else
 	{
 		undo = new QUndoCommand();
-		new QPropertyUndoCommand(
-					m_conductor,
-					"properties",
-					old_value,
-					new_value,
-					undo);
-		undo->setText(
-			QObject::tr(
-				"Modifier les propriétés d'un conducteur",
-				"undo caption"));
+		new QPropertyUndoCommand(m_conductor, "properties", old_value, new_value, undo);
+		undo->setText(QObject::tr("Modifier les propriétés d'un conducteur", "undo caption"));
 	}
 
 	if (!conductor_list.isEmpty())
 	{
 		if (!m_parent_undo)
-			undo->setText(
-				QObject::tr(
-					"Modifier les propriétés de plusieurs conducteurs",
-					"undo caption"));
+			undo->setText(QObject::tr("Modifier les propriétés de plusieurs conducteurs", "undo caption"));
 
 		foreach (Conductor *cond, conductor_list)
 		{
@@ -117,12 +91,7 @@ void ConductorAutoNumerotation::applyText(const QString& t)
 			old_value.setValue(cp2);
 			cp2.text = t;
 			new_value.setValue(cp2);
-			new QPropertyUndoCommand(
-						cond,
-						"properties",
-						old_value,
-						new_value,
-						undo);
+			new QPropertyUndoCommand(cond, "properties", old_value, new_value, undo);
 		}
 	}
 
@@ -131,19 +100,15 @@ void ConductorAutoNumerotation::applyText(const QString& t)
 }
 
 /**
-	@brief ConductorAutoNumerotation::newProperties
-	Create a new properties according to the current autonum rule of diagram
-	@param diagram : Diagram class
-	@param cp : ConductorProperties
-	@param seq : sequentialNumbers
+ * @brief ConductorAutoNumerotation::newProperties
+ * Create a new properties according to the current autonum rule of diagram
+ * @param d
+ * @param cp
+ * @param seq
  */
-void ConductorAutoNumerotation::newProperties(
-		Diagram *diagram,
-		ConductorProperties &cp,
-		autonum::sequentialNumbers &seq)
+void ConductorAutoNumerotation::newProperties(Diagram *diagram, ConductorProperties &cp, autonum::sequentialNumbers &seq)
 {	
-	NumerotationContext context = diagram->project()->conductorAutoNum(
-				diagram->conductorsAutonumName());
+	NumerotationContext context = diagram->project()->conductorAutoNum(diagram->conductorsAutonumName());
 	if (context.isEmpty()) {
 		return;
 	}
@@ -159,8 +124,8 @@ void ConductorAutoNumerotation::newProperties(
 }
 
 /**
-	@brief ConductorAutoNumerotation::numeratePotential
-	Numerate a conductor on an existing potential
+ * @brief ConductorAutoNumerotation::numeratePotential
+ * Numerate a conductor on an existing potential
  */
 void ConductorAutoNumerotation::numeratePotential()
 {
@@ -171,8 +136,7 @@ void ConductorAutoNumerotation::numeratePotential()
 		if (conductor->properties() != cp)
 			properties_equal = false;
 	}
-	// Every properties of the potential is equal,
-	// so we apply it to m_conductor
+		//Every properties of the potential is equal, so we apply it to m_conductor
 	if (properties_equal)
 	{
 		m_conductor->setProperties(cp);
@@ -205,25 +169,21 @@ void ConductorAutoNumerotation::numeratePotential()
 		//the texts isn't identicals
 	else
 	{
-		PotentialSelectorDialog psd(
-					m_conductor,
-					m_parent_undo,
-					m_conductor->diagramEditor());
+		PotentialSelectorDialog psd(m_conductor, m_parent_undo, m_conductor->diagramEditor());
 		psd.exec();
 	}
 }
 
 /**
-	@brief ConductorAutoNumerotation::numerateNewConductor
-	create and apply a new numerotation to @m_conductor
+ * @brief ConductorAutoNumerotation::numerateNewConductor
+ * create and apply a new numerotation to @m_conductor
  */
 void ConductorAutoNumerotation::numerateNewConductor()
 {
 	if (!m_conductor || m_diagram->conductorsAutonumName().isEmpty())
 		return;
 
-	NumerotationContext context = m_diagram->project()->conductorAutoNum(
-				m_diagram -> conductorsAutonumName());
+	NumerotationContext context = m_diagram->project()->conductorAutoNum(m_diagram -> conductorsAutonumName());
 	if (context.isEmpty())
 		return;
 
@@ -234,17 +194,10 @@ void ConductorAutoNumerotation::numerateNewConductor()
 	cp.m_formula = formula;
 	m_conductor->setProperties(cp);
 
-	autonum::setSequential(formula,
-			       m_conductor->rSequenceNum(),
-			       context,
-			       m_diagram,
-			       autoNum_name);
+	autonum::setSequential(formula, m_conductor->rSequenceNum(), context, m_diagram, autoNum_name);
 
 	NumerotationContextCommands ncc (context, m_diagram);
 	m_diagram->project()->addConductorAutoNum(autoNum_name, ncc.next());
 
-	applyText(autonum::AssignVariables::formulaToLabel(
-			  formula,
-			  m_conductor->rSequenceNum(),
-			  m_diagram));
+	applyText(autonum::AssignVariables::formulaToLabel(formula, m_conductor->rSequenceNum(), m_diagram));
 }

sources/conductorautonumerotation.h

@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2020 The QElectroTech team
+	Copyright 2006-2014 The QElectroTech team
 	This file is part of QElectroTech.
 
 	QElectroTech is free software: you can redistribute it and/or modify
@@ -26,23 +26,16 @@ class Conductor;
 class QUndoCommand;
 class ConductorProperties;
 
-/**
-	@brief The ConductorAutoNumerotation class
-*/
 class ConductorAutoNumerotation
 {
 	public:
 		//constructors & destructor
-		ConductorAutoNumerotation (Conductor *conductor,
-					   Diagram *diagram,
-					   QUndoCommand *undo_parent = nullptr);
+		ConductorAutoNumerotation (Conductor *conductor, Diagram *diagram, QUndoCommand *undo_parent = nullptr);
 
 			//methods
 		void        numerate       ();
 		void        applyText      (const QString&);
-		static void newProperties(Diagram *diagram,
-					  ConductorProperties &cp,
-					  autonum::sequentialNumbers &seq);
+		static void newProperties(Diagram *diagram, ConductorProperties &cp, autonum::sequentialNumbers &seq);
 
 	private:
 			//methods

sources/conductornumexport.cpp

@@ -70,7 +70,6 @@ bool ConductorNumExport::toCsv()
 #if QT_VERSION < QT_VERSION_CHECK(5, 15, 0)	// ### Qt 6: remove
 			stream << wiresNum() << endl;
 #else
-#pragma message("@TODO remove code for QT 5.15 or later")
 			stream << wiresNum() << &Qt::endl(stream);
 #endif
 		}

sources/conductorproperties.cpp

@@ -331,23 +331,12 @@ void ConductorProperties::fromXml(QDomElement &e)
 	horiz_rotate_text    = e.attribute("horizrotatetext").toDouble();
 	
 	QMetaEnum me = QMetaEnum::fromType<Qt::Alignment>();
-	m_horizontal_alignment = Qt::Alignment(
-				me.keyToValue(
-					e.attribute(
-						"horizontal-alignment",
-						"AlignBottom"
-						).toStdString().data()));
-	m_vertical_alignment = Qt::Alignment(
-				me.keyToValue(
-					e.attribute(
-						"vertical-alignment",
-						"AlignRight"
-						).toStdString().data()));
+	m_horizontal_alignment = Qt::Alignment(me.keyToValue(e.attribute("horizontal-alignment", "AlignBottom").toStdString().data()));
+	m_vertical_alignment = Qt::Alignment(me.keyToValue(e.attribute("vertical-alignment", "AlignRight").toStdString().data()));
 
 		//Keep retrocompatible with version older than 0,4
 		//If the propertie @type is simple (removed since QET 0,4), we set text no visible.
 		//@TODO remove this code for qet 0.6 or later
-#pragma message("@TODO remove this code for qet 0.6 or later")
 	if (e.attribute("type") == "simple") m_show_text = false;
 }
 
@@ -765,7 +754,6 @@ void ConductorProperties::readStyle(const QString &style_string) {
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)	// ### Qt 6: remove
 	QStringList styles = style_string.split(";", QString::SkipEmptyParts);
 #else
-#pragma message("@TODO remove code QString::SkipEmptyParts for QT 5.14 or later")
 	QStringList styles = style_string.split(";", Qt::SkipEmptyParts);
 #endif
 	

sources/conductorproperties.h

@@ -25,7 +25,6 @@
 class QPainter;
 
 /**
-	@brief The SingleLineProperties class
 	This class represents the properties of a singleline conductor.
 */
 class SingleLineProperties {
@@ -60,7 +59,6 @@ class SingleLineProperties {
 };
 
 /**
-	@brief The ConductorProperties class
 	This class represents the functional properties of a particular conductor,
 	i.e. properties other than path and terminals.
 */
@@ -71,10 +69,9 @@ class ConductorProperties
 		virtual ~ConductorProperties();
 	
 			/**
-				@brief The ConductorType enum Represents
-				the kind of a particular conductor:
-				Single: singleline symbols, no text input
-				Multi: text input, no symbol
+			 * @brief The ConductorType enum Represents the kind of a particular conductor:
+			 * Single: singleline symbols, no text input
+			 * Multi: text input, no symbol
 			 */
 		enum ConductorType { Single, Multi };
 

sources/configdialog.cpp

@@ -15,32 +15,19 @@
 	You should have received a copy of the GNU General Public License
 	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include <QScrollArea>
 #include "configdialog.h"
 #include "configpages.h"
 #include "qetapp.h"
 
-#include "machine_info.h"
-
 /**
 	Constructeur
 	@param parent QWidget parent
 */
 ConfigDialog::ConfigDialog(QWidget *parent) : QDialog(parent) {
-	Machine_info *mymachineinfo= new Machine_info(this);
-	//ScrollArea for low screens
-	QScrollArea *scroll = new QScrollArea(this);
-	scroll->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOn);
-	scroll->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOn);
-
 	// liste des pages
 	pages_list = new QListWidget();
 	pages_list -> setViewMode(QListView::IconMode);
-	if(mymachineinfo->get_max_screen_height()<1000){
-		pages_list -> setIconSize(QSize(64, 64));
-	} else {
     pages_list -> setIconSize(QSize(128, 128));
-	}
 	pages_list -> setMovement(QListView::Static);
     pages_list -> setMinimumWidth(168);
     pages_list -> setMaximumWidth(168);
@@ -49,39 +36,24 @@ ConfigDialog::ConfigDialog(QWidget *parent) : QDialog(parent) {
 	
 	// pages
 	pages_widget = new QStackedWidget();
+	
 	// boutons
-	buttons = new QDialogButtonBox(
-				QDialogButtonBox::Ok
-				|QDialogButtonBox::Cancel);
-
-
-	QWidget *viewport = new QWidget(this);
-	scroll->setWidget(viewport);
-	scroll->setWidgetResizable(true);
+	buttons = new QDialogButtonBox(QDialogButtonBox::Ok|QDialogButtonBox::Cancel);
 	
 	// layouts
-	QHBoxLayout *hlayout1 = new QHBoxLayout(viewport);
-	// add needed widgets to layout "hlayout1"
+	QHBoxLayout *hlayout1 = new QHBoxLayout();
 	hlayout1 -> addWidget(pages_list);
 	hlayout1 -> addWidget(pages_widget);
 	
-	//add hlayout1 to widget
-	viewport->setLayout(hlayout1);
-
-	// Add a layout for QDialog
-	QVBoxLayout *dialog_layout = new QVBoxLayout(this);
-	dialog_layout->addWidget(scroll); // add scroll to the QDialog's layout
-	dialog_layout -> addWidget(buttons);
-	setLayout(dialog_layout);
+	QVBoxLayout *vlayout1 = new QVBoxLayout();
+	vlayout1 -> addLayout(hlayout1);
+	vlayout1 -> addWidget(buttons);
+	setLayout(vlayout1);
 	
 	// connexion signaux / slots
 	connect(buttons, SIGNAL(accepted()), this, SLOT(applyConf()));
 	connect(buttons, SIGNAL(rejected()), this, SLOT(reject()));
-	connect(pages_list, SIGNAL(currentRowChanged(int)),
-		pages_widget, SLOT(setCurrentIndex(int)));
-
-	resize(mymachineinfo->get_max_screen_width(),
-	       mymachineinfo->get_max_screen_height());
+	connect(pages_list, SIGNAL(currentRowChanged(int)), pages_widget, SLOT(setCurrentIndex(int)));
 	
 #ifdef Q_OS_MACOS
 	if (parent) {

sources/dataBase/ui/elementquerywidget.cpp

@@ -46,7 +46,6 @@ ElementQueryWidget::ElementQueryWidget(QWidget *parent) :
 #if QT_VERSION < QT_VERSION_CHECK(5, 15, 0)	// ### Qt 6: remove
 	connect(&m_button_group, static_cast<void (QButtonGroup::*)(int)>(&QButtonGroup::buttonClicked), [this](int id)
 #else
-#pragma message("@TODO remove code for QT 5.15 or later")
 	connect(&m_button_group, static_cast<void (QButtonGroup::*)(int)>(&QButtonGroup::idClicked), [this](int id)
 #endif
 	{

sources/diagram.cpp

@@ -928,6 +928,8 @@ bool Diagram::fromXml(QDomElement &document, QPointF position, bool consider_inf
 	// The first element must be a diagram
 	if (root.tagName() != "diagram") return(false);
 
+    qDebug() << "Diagram: " << root.attribute("title");
+	
 	// Read attributes of this diagram
 	if (consider_informations) {
 		// Version of diagram
@@ -1023,6 +1025,7 @@ bool Diagram::fromXml(QDomElement &document, QPointF position, bool consider_inf
 		}
 		
 		int state = 0;
+        qDebug() << "Element from collection: " << element_location;
 		Element *nvel_elmt = ElementFactory::Instance() -> createElement(element_location, nullptr, &state);
 		if (state)
 		{
@@ -1141,7 +1144,6 @@ bool Diagram::fromXml(QDomElement &document, QPointF position, bool consider_inf
 		content_ptr -> m_images			    = added_images.toSet();
 		content_ptr -> m_shapes			    = added_shapes.toSet();
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 		content_ptr -> m_text_fields	= QSet<IndependentTextItem *>(
 					added_texts.begin(),
 					added_texts.end());

sources/diagramcontext.cpp

@@ -118,7 +118,7 @@ int DiagramContext::count() {
 
 /**
  * @brief DiagramContext::keyMustShow
- * @return the value pairs with key, if key no found, return false
+ * @return the value pairs with key, if key not found, return false
  */
 bool DiagramContext::keyMustShow(const QString &key) const {
 	if (m_content_show.contains(key))

sources/editor/editorcommands.cpp

@@ -416,7 +416,6 @@ void ChangeZValueCommand::applyRaise(const QList<QGraphicsItem *> &items_list) {
 #if QT_VERSION < QT_VERSION_CHECK(5, 13, 0)	// ### Qt 6: remove
 				my_items_list.swap(i, i + 1);
 #else
-#pragma message("@TODO remove code for QT 5.13 or later")
 				my_items_list.swapItemsAt(i, i + 1);
 #endif
 			}
@@ -439,7 +438,6 @@ void ChangeZValueCommand::applyLower(const QList<QGraphicsItem *> &items_list) {
 #if QT_VERSION < QT_VERSION_CHECK(5, 13, 0)	// ### Qt 6: remove
 				my_items_list.swap(i, i - 1);
 #else
-#pragma message("@TODO remove code for QT 5.13 or later")
 				my_items_list.swapItemsAt(i, i - 1);
 #endif
 			}

sources/editor/graphicspart/customelementgraphicpart.cpp

@@ -498,7 +498,6 @@ void CustomElementGraphicPart::stylesFromXml(const QDomElement &qde)
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)	// ### Qt 6: remove
 	QStringList styles = qde.attribute("style").split(";", QString::SkipEmptyParts);
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 	QStringList styles = qde.attribute("style").split(";", Qt::SkipEmptyParts);
 #endif
 	

sources/elementscollectioncache.cpp

@@ -53,7 +53,6 @@ ElementsCollectionCache::ElementsCollectionCache(const QString &database_path, Q
 
 			//TODO This code remove old table with mtime for create table with uuid, created at version 0,5
 			//see to remove this code at version 0,6 or 0,7 when all users will table with uuid.
-#pragma message("@TODO remove this code for qet 0.6 or later")
 		QSqlQuery table_name(cache_db_);
 		if (table_name.exec("PRAGMA table_info(names)"))
 		{

sources/factory/elementpicturefactory.cpp

@@ -559,7 +559,6 @@ void ElementPictureFactory::setPainterStyle(const QDomElement &dom, QPainter &pa
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)	// ### Qt 6: remove
 	const QStringList styles = dom.attribute("style").split(";", QString::SkipEmptyParts);
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 	const QStringList styles = dom.attribute("style").split(";", Qt::SkipEmptyParts);
 #endif
 	QRegExp rx("^\\s*([a-z-]+)\\s*:\\s*([a-zA-Z-]+)\\s*$");

sources/machine_info.cpp

@@ -1,85 +0,0 @@
-/*
-	Copyright 2006-2020 The QElectroTech Team
-	This file is part of QElectroTech.
-
-	QElectroTech is free software: you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation, either version 2 of the License, or
-	(at your option) any later version.
-
-	QElectroTech is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "machine_info.h"
-#include <QScreen>
-#include <QApplication>
-
-/**
-	@brief Machine_info::Machine_info
-	@param parent
-*/
-Machine_info::Machine_info(QObject *parent) : QObject(parent)
-{
-	init_get_Screen_info();
-}
-
-/**
-	@brief Machine_info::init_get_Screen_info
-	Finds the largest screen and saves the values
-*/
-void Machine_info::init_get_Screen_info()
-{
-	const auto screens = qApp->screens();
-	for (int ii = 0; ii < screens.count(); ++ii)
-	{
-		if(
-				Max_screen_width
-				<
-				screens[ii]->geometry().width()
-				*
-				screens[ii]->devicePixelRatio()
-				)
-		{
-			Max_screen_width =
-					screens[ii]->geometry().width()
-					*
-					screens[ii]->devicePixelRatio();
-		}
-		if(
-				Max_screen_height
-				<
-				screens[ii]->geometry().height()
-				*
-				screens[ii]->devicePixelRatio()
-				)
-		{
-			Max_screen_height =
-					screens[ii]->geometry().height()
-					*
-					screens[ii]->devicePixelRatio();
-		}
-	}
-}
-
-/**
-	@brief Machine_info::get_max_screen_width
-	@return max screen width
- */
-int32_t Machine_info::get_max_screen_width()
-{
-	return Max_screen_width;
-}
-
-/**
-	@brief Machine_info::get_max_screen_height
-	@return max screen height
-*/
-int32_t Machine_info::get_max_screen_height()
-{
-	return Max_screen_height;
-}

sources/machine_info.h

@@ -1,45 +0,0 @@
-/*
-	Copyright 2006-2020 The QElectroTech Team
-	This file is part of QElectroTech.
-
-	QElectroTech is free software: you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation, either version 2 of the License, or
-	(at your option) any later version.
-
-	QElectroTech is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef MACHINE_INFO_H
-#define MACHINE_INFO_H
-
-#include <QObject>
-
-/**
-	@brief The Machine_info class
-	This class hold information from your PC.
-*/
-class Machine_info : public QObject
-{
-	Q_OBJECT
-public:
-	explicit Machine_info(QObject *parent = nullptr);
-	int32_t get_max_screen_width();
-	int32_t get_max_screen_height();
-
-signals:
-
-private:
-	void init_get_Screen_info();
-	int32_t Max_screen_width;
-	int32_t Max_screen_height;
-
-
-};
-
-#endif // MACHINE_INFO_H

sources/main.cpp

@@ -22,13 +22,11 @@
 #include <QStyleFactory>
 
 /**
-	@brief main
-	Main function of QElectroTech
-	@param argc : number of parameters
-	\~French number of paramètres
-	\~ @param argv : parameters
-	\~French paramètres
-	\~ @return exit code
+ * @brief main
+ * Main function of QElectroTech
+ * @param argc : number of paramètres
+ * @param argv : paramètres
+ * @return
  */
 int main(int argc, char **argv)
 {
@@ -39,7 +37,6 @@ int main(int argc, char **argv)
 		//Creation and execution of the application
 		//HighDPI
 #if QT_VERSION >= QT_VERSION_CHECK(5, 6, 0)
-#pragma message("@TODO remove code for QT 5.6 or later")
     QCoreApplication::setAttribute(Qt::AA_EnableHighDpiScaling);
 #else
     qputenv("QT_DEVICE_PIXEL_RATIO", QByteArray("auto"));
@@ -59,16 +56,14 @@ int main(int argc, char **argv)
 			//Remove the first argument, it's the binary file
 		arg_list.takeFirst();
 		QETArguments qetarg(arg_list);
-		QString message = "launched-with-args: " + QET::joinWithSpaces(
-					QStringList(qetarg.arguments()));
+		QString message = "launched-with-args: " + QET::joinWithSpaces(QStringList(qetarg.arguments()));
 		app.sendMessage(message.toUtf8());
 		return 0;
 	}
 	
 	QETApp qetapp;
 	QETApp::instance()->installEventFilter(&qetapp);
-	QObject::connect(&app, &SingleApplication::receivedMessage,
-			 &qetapp, &QETApp::receiveMessage);
+	QObject::connect(&app, &SingleApplication::receivedMessage, &qetapp, &QETApp::receiveMessage);
 	
 	return app.exec();
 }

sources/nomenclature.cpp

@@ -69,7 +69,6 @@ bool nomenclature::saveToCSVFile()
 #if QT_VERSION < QT_VERSION_CHECK(5, 15, 0)	// ### Qt 6: remove
 			stream << getNomenclature() << endl;
 #else
-#pragma message("@TODO remove code for QT 5.15 or later")
 			stream << getNomenclature() << &Qt::endl(stream);
 #endif
 		}

sources/properties/propertiesinterface.cpp

@@ -17,16 +17,6 @@
 */
 #include "propertiesinterface.h"
 
-/**
-	@brief PropertiesInterface::PropertiesInterface
-*/
 PropertiesInterface::PropertiesInterface()
 {
 }
-/**
-	@brief PropertiesInterface::~PropertiesInterface
-*/
-PropertiesInterface::~PropertiesInterface()
-{
-
-}

sources/properties/propertiesinterface.h

@@ -23,44 +23,18 @@
 #include <QDomElement>
 
 /**
-	@brief The PropertiesInterface class
-	This class is an interface for have common way
-	to use properties in QElectroTech
+ * @brief The PropertiesInterface class
+ * This class is an interface for have common way to use properties in QElectroTech
  */
 class PropertiesInterface
 {
 	public:
 	PropertiesInterface();
-		virtual ~PropertiesInterface();
-		/**
-			@brief toSettings
-			Save properties to setting file.
-			@param settings : is use for prefix a word
-			befor the name of each paramètre
-		*/
-		virtual void toSettings (QSettings &settings,
-					 const QString = QString()) const =0;
-		/**
-			@brief fromSettings
-			load properties to setting file.
-			@param settings : is use for prefix a word
-			befor the name of each paramètre
-		*/
-		virtual void fromSettings (const QSettings &settings,
-					   const QString = QString()) =0;
-		/**
-			@brief toXml
-			Save properties to xml element
-			@param xml_document
-			@return QDomElement
-		*/
+	// Save/load properties to setting file. QString is use for prefix a word befor the name of each paramètre
+	virtual void toSettings	  (QSettings &settings, const QString = QString()) const =0;
+	virtual void fromSettings (const QSettings &settings, const QString = QString()) =0;
+	// Save/load properties to xml element
     virtual QDomElement toXml		  (QDomDocument &xml_document) const =0;
-		/**
-			@brief fromXml
-			load properties to xml element
-			@param xml_element
-			@return true / false
-		*/
     virtual bool fromXml	  (const QDomElement &xml_element) =0;
 };
 

sources/properties/reportproperties.h

@@ -20,9 +20,6 @@
 
 #include <QString>
 
-/**
-	@brief The ReportProperties class
-*/
 class ReportProperties
 {
 	public:

sources/properties/terminaldata.cpp

@@ -23,89 +23,44 @@ TerminalData::~TerminalData()
 
 }
 
-/**
-	@brief TerminalData::setParent
-	@param parent
-*/
 void TerminalData::setParent(QGraphicsObject* parent)
 {
     q = parent;
 }
 
-/**
-	@brief TerminalData::toSettings
-	Save properties to setting file.
-
-	QString is use for prefix a word befor the name of each paramètre
-	@param settings UNUSED
-*/
 void TerminalData::toSettings(QSettings &settings, const QString) const
 
 {
 	Q_UNUSED(settings);
 }
 
-/**
-	@brief TerminalData::fromSettings
-	load properties to setting file.
-
-	QString is use for prefix a word befor the name of each paramètre
-	@param settings UNUSED
-*/
 void TerminalData::fromSettings(const QSettings &settings, const QString)
 {
 	Q_UNUSED(settings);
 }
 
-/**
-	@brief TerminalData::toXml
-	Save properties to xml element
-	write the name, number, position and orientation of the terminal
-	to xml_element
-
-	@note This method is only called from the PartTerminal
-	and should never called from the Terminal class
-	@param xml_document
-	@return xml_element : DomElement with
-	the name, number, position and orientation of the terminal
-*/
 QDomElement TerminalData::toXml(QDomDocument &xml_document) const
 {
     QDomElement xml_element = xml_document.createElement("terminal");
 
-	// write the position of the terminal
     // ecrit la position de la borne
     xml_element.setAttribute("x", QString("%1").arg(q->scenePos().x()));
     xml_element.setAttribute("y", QString("%1").arg(q->scenePos().y()));
 
-	// Write name and number to XML
+
     xml_element.setAttribute("uuid", m_uuid.toString());
     xml_element.setAttribute("name", m_name);
 
-	// write the orientation of the terminal
     // ecrit l'orientation de la borne
-	xml_element.setAttribute("orientation",
-				 Qet::orientationToString(m_orientation));
+    xml_element.setAttribute("orientation", Qet::orientationToString(m_orientation));
+    // Write name and number to XML
 
     return(xml_element);
 }
-
-/**
-	@brief TerminalData::fromXml
-	load properties to xml element
-
-	@note This method is only called from the PartTerminal
-	and should never called from the Terminal class
-	@param xml_element
-	@return true if succeeded / false if the attribute is not real
-*/
 bool TerminalData::fromXml (const QDomElement &xml_element)
 {
-	qreal term_x = 0.0;
-	qreal term_y = 0.0;
-
-	// reads the position of the terminal
     // lit la position de la borne
+    qreal term_x = 0.0, term_y = 0.0;
     if (!QET::attributeIsAReal(xml_element, "x", &term_x))
         return false;
 
@@ -117,20 +72,16 @@ bool TerminalData::fromXml (const QDomElement &xml_element)
     //emit posFromXML(QPointF(term_x, term_y));
 
     QString uuid = xml_element.attribute("uuid");
-	// update part and add uuid, which is used in the new version
-	// to connect terminals together
-	// if the attribute not exists, means, the element is created with an
-	// older version of qet. So use the legacy approach
+    // update part and add uuid, which is used in the new version to connect terminals together
+    // if the attribute not exists, means, the element is created with an older version of qet. So use the legacy approach
     // to identify terminals
     if (!uuid.isEmpty())
         m_uuid = QUuid(uuid);
 
     m_name = xml_element.attribute("name");
 
-	// read the orientation of the terminal
     // lit l'orientation de la borne
-	m_orientation = Qet::orientationFromString(
-				xml_element.attribute("orientation"));
+    m_orientation = Qet::orientationFromString(xml_element.attribute("orientation"));
 
     return true;
 }

sources/properties/terminaldata.h

@@ -26,58 +26,50 @@ class TerminalData : public PropertiesInterface
     void init();
 
     void setParent(QGraphicsObject* parent);
-		void toSettings(QSettings &settings,
-				const QString = QString()) const override;
-		void fromSettings(const QSettings &settings,
-				  const QString = QString()) override;
+
+    // Save/load properties to setting file. QString is use for prefix a word befor the name of each paramètre
+    void toSettings(QSettings &settings, const QString = QString()) const override;
+    void fromSettings(const QSettings &settings, const QString = QString()) override;
+    // Save/load properties to xml element
+    // This method is only called from the PartTerminal and should never called from the Terminal class
     QDomElement toXml(QDomDocument &xml_element) const override;
     bool fromXml(const QDomElement &xml_element) override;
 
-	// must be public, because this class is a private member
-	// of PartTerminal/Terminal and they must access this data
+    // must be public, because this class is a private member of PartTerminal/Terminal and they must
+    // access this data
 public:
-		/**
-			@brief m_orientation
-			Orientation of the terminal
+    /*!
+     * \brief m_orientation
+     * Orientation of the terminal
      */
     Qet::Orientation m_orientation;
-		/**
-			@brief second_point
-			Position of the second point of the terminal
-			in scene coordinates
+    /*!
+     * \brief second_point
+     * Position of the second point of the terminal in scene coordinates
      */
     QPointF second_point;
-		/**
-			@brief m_uuid
-			Uuid of the terminal.
-
-			In elementscene.cpp an element gets a new uuid when
-			saving the element. In the current state
-			each connection is made by using the local position
-			of the terminal and a dynamic id. In the new
-			case, each terminal should have it's own uuid to
-			identify it uniquely. When changing each time this
-			uuid, the conductor after updating the part is anymore
-			valid. So if in the loaded document a uuid exists,
-			use this one and don't create a new one.
+    /*!
+     * \brief m_uuid
+     * Uuid of the terminal.
+     *
+     * In elementscene.cpp an element gets a new uuid when saving the element. In the current state
+     * each connection is made by using the local position of the terminal and a dynamic id. In the new
+     * case, each terminal should have it's own uuid to identify it uniquely. When changing each time this
+     * uuid, the conductor after updating the part is anymore valid. So if in the loaded document a uuid exists,
+     * use this one and don't create a new one.
      */
     QUuid m_uuid;
-		/**
-			@brief m_name
-			Name of the element.
-			It can be used to create wiring harness tables
+    /*!
+     * \brief m_name
+     * Name of the element. It can be used to create wiring harness tables
      */
     QString m_name;
 
-		/**
-			@brief m_pos
-			Position of the terminal. The second point is calculated
-			from this position and the orientation
-			@note
-			Important: this variable is only updated during read
-			from xml and not during mouse move!
-			It is used to store the initial position so that
-			PartTerminal and Terminal have access to it.
+    /*!
+     * \brief m_pos
+     * Position of the terminal. The second point is calculated from this position and the orientation
+     * Important: this variable is only updated during read from xml and not during mouse move!
+     * It is used to store the initial position so that PartTerminal and Terminal have access to it.
      */
     QPointF m_pos;
 private:

sources/qet.cpp

@@ -176,7 +176,6 @@ bool QET::orthogonalProjection(const QPointF &point, const QLineF &line, QPointF
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)
 	QLineF::IntersectType it = line.intersect(perpendicular_line, &intersection_point); // ### Qt 6: remove
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 	QLineF::IntersectType it = line.intersects(perpendicular_line, &intersection_point);
 #endif
 	
@@ -451,7 +450,6 @@ QStringList QET::splitWithSpaces(const QString &string) {
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)	// ### Qt 6: remove
 	QStringList escaped_strings = string.split(QRegExp("[^\\]?(?:\\\\)* "), QString::SkipEmptyParts);
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 	QStringList escaped_strings = string.split(QRegExp("[^\\]?(?:\\\\)* "), Qt::SkipEmptyParts);
 #endif
 

sources/qetdiagrameditor.cpp

@@ -2220,19 +2220,19 @@ void QETDiagramEditor::generateTerminalBlock()
 		success = process->startDetached("qet_tb_generator", {(QETDiagramEditor::currentProjectView()->project()->filePath())});
 	}
 	else  {
-		success = process->startDetached("qet_tb_generator", {("")});
+		success = process->startDetached("qet_tb_generator");
 	}
 	if (openedProjects().count()){
 		success = process->startDetached(QDir::homePath() + "/Application Data/qet/qet_tb_generator.exe", {(QETDiagramEditor::currentProjectView()->project()->filePath())});
 	}
 	else  {
-		success = process->startDetached(QDir::homePath() + "/Application Data/qet/qet_tb_generator.exe", {("")});
+		success = process->startDetached(QDir::homePath() + "/Application Data/qet/qet_tb_generator.exe");
 	}
 	if (openedProjects().count()){
 		success = process->startDetached(QDir::homePath() + "/qet_tb_generator.exe", {(QETDiagramEditor::currentProjectView()->project()->filePath())});
 	}
 	else  {
-		success = process->startDetached(QDir::homePath() + "/qet_tb_generator.exe", {("")});
+		success = process->startDetached(QDir::homePath() + "/qet_tb_generator.exe");
 	}
 
 #elif  defined(Q_OS_MAC)
@@ -2240,13 +2240,13 @@ void QETDiagramEditor::generateTerminalBlock()
 		success = process->startDetached("/Library/Frameworks/Python.framework/Versions/3.8/bin/qet_tb_generator", {(QETDiagramEditor::currentProjectView()->project()->filePath())});
 	}
 	else  {
-		success = process->startDetached("/Library/Frameworks/Python.framework/Versions/3.8/bin/qet_tb_generator", {("")});
+		success = process->startDetached("/Library/Frameworks/Python.framework/Versions/3.8/bin/qet_tb_generator");
 	}
 		if (openedProjects().count()){
 		success = process->startDetached(QDir::homePath() + "/.qet/qet_tb_generator.app", {(QETDiagramEditor::currentProjectView()->project()->filePath())});
 	}
 	else  {
-		success = process->startDetached(QDir::homePath() + "/.qet/qet_tb_generator.app", {("")});
+		success = process->startDetached(QDir::homePath() + "/.qet/qet_tb_generator.app");
 	}
 	
 #else
@@ -2254,13 +2254,13 @@ void QETDiagramEditor::generateTerminalBlock()
 		success = process->startDetached("qet_tb_generator", {(QETDiagramEditor::currentProjectView()->project()->filePath())});
 	}
 	else  {
-		success = process->startDetached("qet_tb_generator", {("")});
+		success = process->startDetached("qet_tb_generator");
 	}
 	if (openedProjects().count()){
 		success = process->startDetached(QDir::homePath() + "/.qet/qet_tb_generator", {(QETDiagramEditor::currentProjectView()->project()->filePath())});
 	}
 	else  {
-		success = process->startDetached(QDir::homePath() + "/.qet/qet_tb_generator", {("")});
+		success = process->startDetached(QDir::homePath() + "/.qet/qet_tb_generator");
 	}
 	
 #endif

sources/qetgraphicsitem/ViewItem/projectdbmodel.cpp

@@ -309,6 +309,8 @@ void ProjectDBModel::dataBaseUpdated()
 	auto new_record = m_record;
 	m_record = original_record;
 	
+	//This a very special case, if this nomenclature model is added
+	//befor any element, column count return 0, so in this case we emit column inserted
 	if (new_record.size() != m_record.size())
 	{
 		emit beginResetModel();

sources/qetgraphicsitem/ViewItem/qetgraphicstableitem.cpp

@@ -61,56 +61,6 @@ void QetGraphicsTableItem::adjustTableToFolio(QetGraphicsTableItem *table, QMarg
 	table->setDisplayNRow(int(floor(available_height/min_row_height))); //Convert a double to int, but max_row_to_display is already rounded an integer so we assume everything is ok
 }
 
-/**
- * @brief QetGraphicsTableItem::checkInsufficientRowsCount
- * Check if the number of rows of @table + linked table is enough to display all
- * content of the model, if not open a dialog to advise user what to do.
- * @param table
- */
-void QetGraphicsTableItem::checkInsufficientRowsCount(QetGraphicsTableItem *table)
-{
-	if (!table->diagram() || !table->model()) {
-		return;
-	}
-
-	auto first_table = table;
-	while (first_table->previousTable())
-		first_table = first_table->previousTable();
-
-	if (first_table->displayNRow() <= 0) //displayed rows is unlimited
-		return;
-
-	int count_ = first_table->displayNRow();
-	bool several_table = false;
-	while (first_table->nextTable())
-	{
-		several_table = true;
-		first_table = first_table->nextTable();
-		if (first_table->displayNRow() <= 0) { //displayed rows is unlimited
-			return;
-		} else {
-			count_ += first_table->displayNRow();
-			first_table->displayNRowOffset();
-		}
-	}
-
-	if (count_ < first_table->model()->rowCount())
-	{
-		QWidget *parent = first_table->diagram()->views().first() ? first_table->diagram()->views().first() : nullptr;
-
-		QString text;
-		if (several_table) {
-			text = tr("Les information à afficher sont supérieurs à la quantité maximal pouvant être affiché par les tableaux.\n"
-					  "Veuillez ajouter un nouveau tableau ou regler les tableaux existant afin d'afficher l'integralité des informations.");
-		} else {
-			text = tr("Les information à afficher sont supérieurs à la quantité maximal pouvant être affiché par le tableau.\n"
-					  "Veuillez ajouter un nouveau tableau ou regler le tableau existant afin d'afficher l'integralité des informations.");
-		}
-		QMessageBox::information(parent, tr("Limitation de tableau"), text);
-	}
-
-}
-
 /**
  * @brief QetGraphicsTableItem::QetGraphicsTableItem
  * Default constructor
@@ -651,10 +601,6 @@ QVariant QetGraphicsTableItem::itemChange(QGraphicsItem::GraphicsItemChange chan
 void QetGraphicsTableItem::modelReseted() {
 	dataChanged(m_model->index(0,0), m_model->index(0,0), QVector<int>());
 	setToMinimumHeight();
-
-	if (!previousTable()) { //this is the head table
-		checkInsufficientRowsCount(this);
-	}
 }
 
 /**

sources/qetgraphicsitem/ViewItem/qetgraphicstableitem.h

@@ -48,7 +48,6 @@ class QetGraphicsTableItem : public QetGraphicsItem
 
 	public :
 		static void adjustTableToFolio(QetGraphicsTableItem *table, QMargins margins = QMargins(20,20,20,0));
-		static void checkInsufficientRowsCount(QetGraphicsTableItem *first_table);
 
     public:
         QetGraphicsTableItem(QGraphicsItem *parent= nullptr);

sources/qetgraphicsitem/ViewItem/ui/graphicstablepropertieseditor.cpp

@@ -52,8 +52,6 @@ GraphicsTablePropertiesEditor::GraphicsTablePropertiesEditor(QetGraphicsTableIte
 	if (table) {
 		setTable(table);
 	}
-
-	ui->m_info_label->setStyleSheet("QLabel {color : red; }");
 }
 
 /**
@@ -283,8 +281,6 @@ void GraphicsTablePropertiesEditor::updateUi()
 		}
 	}
 
-	updateInfoLabel();
-
 	auto margin = QETUtils::marginsFromString(m_table_item->model()->headerData(0, Qt::Horizontal, Qt::UserRole+1).toString());
 	ui->m_header_top_margin   ->setValue(margin.top());
 	ui->m_header_left_margin  ->setValue(margin.left());
@@ -310,38 +306,6 @@ void GraphicsTablePropertiesEditor::updateUi()
 	setUpEditConnection();
 }
 
-void GraphicsTablePropertiesEditor::updateInfoLabel()
-{
-	auto table_ = m_table_item;
-	while (table_->previousTable()) { table_ = table_->previousTable();}
-
-	int count_ = 0;
-	bool infinite = false;
-	if (table_->displayNRow() <= 0) {
-		infinite = true;
-	} else {
-		count_ = table_->displayNRow();
-	}
-
-	while (table_->nextTable())
-	{
-		table_ = table_->nextTable();
-		if (table_->displayNRow() <= 0) {
-			infinite = true;
-		} else {
-			count_ += table_->displayNRow();
-		}
-	}
-
-	auto value = m_table_item->model()->rowCount() - count_;
-	if (value > 0 && !infinite) {
-		ui->m_info_label->setText(tr("<center>ATTENTION :</center>\n il manque %1 lignes afin d'afficher l'intégralité des informations").arg(value));
-		ui->m_info_label->show();
-	} else {
-		ui->m_info_label->hide();
-	}
-}
-
 /**
  * @brief GraphicsTablePropertiesEditor::setUpEditConnection
  */
@@ -369,12 +333,10 @@ void GraphicsTablePropertiesEditor::setUpEditConnection()
 		m_edit_connection << connect(m_table_button_group,       QOverload<int>::of(&QButtonGroup::buttonClicked), this, &GraphicsTablePropertiesEditor::apply);
 		m_edit_connection << connect(m_header_button_group,      QOverload<int>::of(&QButtonGroup::buttonClicked), this, &GraphicsTablePropertiesEditor::apply);
 #else
-#pragma message("@TODO remove code for QT 5.15 or later")
 		m_edit_connection << connect(m_table_button_group,       QOverload<int>::of(&QButtonGroup::idClicked), this, &GraphicsTablePropertiesEditor::apply);
 		m_edit_connection << connect(m_header_button_group,      QOverload<int>::of(&QButtonGroup::idClicked), this, &GraphicsTablePropertiesEditor::apply);
 #endif
 		m_edit_connection << connect(ui->m_display_n_row_sb,     QOverload<int>::of(&QSpinBox::valueChanged),      this, &GraphicsTablePropertiesEditor::apply);
-		m_edit_connection << connect(ui->m_display_n_row_sb,     QOverload<int>::of(&QSpinBox::valueChanged),      this, &GraphicsTablePropertiesEditor::updateInfoLabel);
 	}
 }
 

sources/qetgraphicsitem/ViewItem/ui/graphicstablepropertieseditor.h

@@ -52,7 +52,6 @@ class GraphicsTablePropertiesEditor : public PropertiesEditorWidget
 		void on_m_header_font_pb_clicked();
 		void on_m_table_font_pb_clicked();
 		virtual void updateUi() override;
-		void updateInfoLabel();
 		void on_m_table_name_le_textEdited(const QString &arg1);
 		void on_m_previous_table_cb_activated(int index);
 		void on_m_previous_pb_clicked();

sources/qetgraphicsitem/ViewItem/ui/graphicstablepropertieseditor.ui

@@ -7,7 +7,7 @@
     <x>0</x>
     <y>0</y>
     <width>524</width>
-    <height>623</height>
+    <height>600</height>
    </rect>
   </property>
   <property name="windowTitle">
@@ -40,17 +40,40 @@
           <string>Géometrie et lignes</string>
          </property>
          <layout class="QGridLayout" name="gridLayout_2" columnstretch="0,0,0,0,0,0,0,0">
-          <item row="1" column="4">
-           <widget class="QSpinBox" name="m_display_n_row_sb">
-            <property name="specialValueText">
-             <string>Toutes</string>
+          <item row="0" column="6">
+           <widget class="QPushButton" name="m_apply_geometry_to_linked_table_pb">
+            <property name="toolTip">
+             <string>Appliquer la géometrie à tous les tableaux liée à celui-ci</string>
             </property>
-            <property name="maximum">
-             <number>999</number>
+            <property name="text">
+             <string/>
+            </property>
+            <property name="icon">
+             <iconset resource="../../../../qelectrotech.qrc">
+              <normaloff>:/ico/22x22/all_pages.png</normaloff>:/ico/22x22/all_pages.png</iconset>
             </property>
            </widget>
           </item>
-          <item row="2" column="6">
+          <item row="1" column="2">
+           <widget class="QSpinBox" name="m_y_pos">
+            <property name="maximum">
+             <number>10000</number>
+            </property>
+           </widget>
+          </item>
+          <item row="1" column="4">
+           <widget class="QComboBox" name="m_previous_table_cb">
+            <property name="insertPolicy">
+             <enum>QComboBox::InsertAtBottom</enum>
+            </property>
+            <item>
+             <property name="text">
+              <string>Aucun</string>
+             </property>
+            </item>
+           </widget>
+          </item>
+          <item row="1" column="6">
            <widget class="QPushButton" name="m_next_pb">
             <property name="enabled">
              <bool>true</bool>
@@ -70,19 +93,14 @@
             </property>
            </widget>
           </item>
-          <item row="2" column="4">
-           <widget class="QComboBox" name="m_previous_table_cb">
-            <property name="insertPolicy">
-             <enum>QComboBox::InsertAtBottom</enum>
+          <item row="0" column="2">
+           <widget class="QSpinBox" name="m_x_pos">
+            <property name="maximum">
+             <number>10000</number>
             </property>
-            <item>
-             <property name="text">
-              <string>Aucun</string>
-             </property>
-            </item>
            </widget>
           </item>
-          <item row="1" column="0">
+          <item row="0" column="0">
            <spacer name="horizontalSpacer">
             <property name="orientation">
              <enum>Qt::Horizontal</enum>
@@ -95,7 +113,20 @@
             </property>
            </spacer>
           </item>
-          <item row="1" column="5">
+          <item row="1" column="7">
+           <spacer name="horizontalSpacer_2">
+            <property name="orientation">
+             <enum>Qt::Horizontal</enum>
+            </property>
+            <property name="sizeHint" stdset="0">
+             <size>
+              <width>40</width>
+              <height>20</height>
+             </size>
+            </property>
+           </spacer>
+          </item>
+          <item row="0" column="5">
            <widget class="QPushButton" name="m_auto_geometry_pb">
             <property name="toolTip">
              <string>Ajuster le tableau au folio</string>
@@ -109,47 +140,7 @@
             </property>
            </widget>
           </item>
-          <item row="2" column="7">
-           <spacer name="horizontalSpacer_2">
-            <property name="orientation">
-             <enum>Qt::Horizontal</enum>
-            </property>
-            <property name="sizeHint" stdset="0">
-             <size>
-              <width>40</width>
-              <height>20</height>
-             </size>
-            </property>
-           </spacer>
-          </item>
-          <item row="2" column="1">
-           <widget class="QLabel" name="label_7">
-            <property name="text">
-             <string>Y :</string>
-            </property>
-            <property name="alignment">
-             <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
-            </property>
-           </widget>
-          </item>
-          <item row="1" column="1">
-           <widget class="QLabel" name="label_8">
-            <property name="text">
-             <string>X :</string>
-            </property>
-            <property name="alignment">
-             <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
-            </property>
-           </widget>
-          </item>
-          <item row="1" column="2">
-           <widget class="QSpinBox" name="m_x_pos">
-            <property name="maximum">
-             <number>10000</number>
-            </property>
-           </widget>
-          </item>
-          <item row="4" column="1" colspan="6">
+          <item row="2" column="1" colspan="6">
            <widget class="QWidget" name="widget_3" native="true">
             <layout class="QHBoxLayout" name="horizontalLayout_3">
              <property name="leftMargin">
@@ -167,7 +158,47 @@
             </layout>
            </widget>
           </item>
-          <item row="2" column="5">
+          <item row="0" column="3">
+           <widget class="QLabel" name="label">
+            <property name="text">
+             <string>Lignes à afficher :</string>
+            </property>
+            <property name="alignment">
+             <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+            </property>
+           </widget>
+          </item>
+          <item row="0" column="1">
+           <widget class="QLabel" name="label_8">
+            <property name="text">
+             <string>X :</string>
+            </property>
+            <property name="alignment">
+             <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+            </property>
+           </widget>
+          </item>
+          <item row="0" column="4">
+           <widget class="QSpinBox" name="m_display_n_row_sb">
+            <property name="specialValueText">
+             <string>Toutes</string>
+            </property>
+            <property name="maximum">
+             <number>999</number>
+            </property>
+           </widget>
+          </item>
+          <item row="1" column="3">
+           <widget class="QLabel" name="label_3">
+            <property name="text">
+             <string>Tableau précédent :</string>
+            </property>
+            <property name="alignment">
+             <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+            </property>
+           </widget>
+          </item>
+          <item row="1" column="5">
            <widget class="QPushButton" name="m_previous_pb">
             <property name="enabled">
              <bool>true</bool>
@@ -187,60 +218,16 @@
             </property>
            </widget>
           </item>
-          <item row="2" column="2">
-           <widget class="QSpinBox" name="m_y_pos">
-            <property name="maximum">
-             <number>10000</number>
-            </property>
-           </widget>
-          </item>
-          <item row="1" column="6">
-           <widget class="QPushButton" name="m_apply_geometry_to_linked_table_pb">
-            <property name="toolTip">
-             <string>Appliquer la géometrie à tous les tableaux liée à celui-ci</string>
-            </property>
+          <item row="1" column="1">
+           <widget class="QLabel" name="label_7">
             <property name="text">
-             <string/>
-            </property>
-            <property name="icon">
-             <iconset resource="../../../../qelectrotech.qrc">
-              <normaloff>:/ico/22x22/all_pages.png</normaloff>:/ico/22x22/all_pages.png</iconset>
-            </property>
-           </widget>
-          </item>
-          <item row="2" column="3">
-           <widget class="QLabel" name="label_3">
-            <property name="text">
-             <string>Tableau précédent :</string>
+             <string>Y :</string>
             </property>
             <property name="alignment">
              <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
             </property>
            </widget>
           </item>
-          <item row="1" column="3">
-           <widget class="QLabel" name="label">
-            <property name="text">
-             <string>Lignes à afficher :</string>
-            </property>
-            <property name="alignment">
-             <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
-            </property>
-           </widget>
-          </item>
-          <item row="3" column="1" colspan="6">
-           <widget class="QLabel" name="m_info_label">
-            <property name="text">
-             <string>TextLabel</string>
-            </property>
-            <property name="textFormat">
-             <enum>Qt::RichText</enum>
-            </property>
-            <property name="scaledContents">
-             <bool>false</bool>
-            </property>
-           </widget>
-          </item>
          </layout>
         </widget>
        </item>

sources/qetgraphicsitem/conductor.cpp

@@ -1675,7 +1675,6 @@ QSet<Conductor *> Conductor::relatedPotentialConductors(const bool all_diagram,
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)	// ### Qt 6: remove
 			other_conductors += other_conductors_list_t.toSet();
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 			other_conductors += QSet<Conductor*>(other_conductors_list_t.begin(),other_conductors_list_t.end());
 #endif
 		}

sources/qetgraphicsitem/element.cpp

@@ -418,6 +418,7 @@ bool Element::buildFromXml(const QDomElement &xml_def_elmt, int *state)
 		{
 				//Minor workaround to find if there is a "input" tagg as label.
 				//If not, we set the tagg "label" to the first "input.
+            // TODO: Remove in later version begin
 			QList <QDomElement> input_field;
 			bool have_label = false;
 			for (QDomElement input_node = node.firstChildElement("input") ; !input_node.isNull() ; input_node = input_node.nextSiblingElement("input"))
@@ -429,8 +430,11 @@ bool Element::buildFromXml(const QDomElement &xml_def_elmt, int *state)
 						have_label = true;
 				}
 			}
-			if(!have_label && !input_field.isEmpty())
+            if(!have_label && !input_field.isEmpty()) {
+                qDebug() << input_field.first().attribute("text");
 				input_field.first().setAttribute("tagg", "label");
+            }
+            // TODO: Remove in later version end
 			
 				//Parse the definition
 			for (QDomNode n = node.firstChild() ; !n.isNull() ; n = n.nextSibling())
@@ -717,15 +721,20 @@ bool Element::fromXml(QDomElement &e, QHash<int, Terminal *> &table_id_adr, bool
 		setRotation(90*read_ori);
 	}
 
-		//Befor load the dynamic text field,
+    // TODO: elementInformations are not read from the diagram section or? Yes see below
+	
+//#######################################################################################################################
+//####    START   #######################################################################################################
+//#######################################################################################################################
+        //Before load the dynamic text field,
         //we remove the dynamic text field created from the description of this element, to avoid doublons.
 	for(DynamicElementTextItem *deti : m_dynamic_text_list)
 		delete deti;
 	m_dynamic_text_list.clear();
-    
 		//************************//
 		//***Dynamic texts item***//
 		//************************//
+        // Texts in diagram section
 	for (const QDomElement& qde : QET::findInDomElement(e, "dynamic_texts", DynamicElementTextItem::xmlTagName()))
     {
         DynamicElementTextItem *deti = new DynamicElementTextItem(this);
@@ -733,20 +742,24 @@ bool Element::fromXml(QDomElement &e, QHash<int, Terminal *> &table_id_adr, bool
         deti->fromXml(qde);
     }
 	
+    // TODO: remove in later version begin
 
 		//************************//
 		//***Element texts item***//
 		//************************//
-	QList<QDomElement> inputs = QET::findInDomElement(e, "inputs", "input");
+        // Inputs in diagram section
+    QList<QDomElement> inputs = QET::findInDomElement(e, "inputs", "input"); // Inputs in diagram section
 	
 		//First case, we check for the text item converted to dynamic text item
-	const QList <DynamicElementTextItem *> conv_deti_list = m_converted_text_from_xml_description.keys();
+    const QList <DynamicElementTextItem *> conv_deti_list = m_converted_text_from_xml_description.keys(); // Texts in element definition (elements collection)
 	QList <DynamicElementTextItem *> successfully_converted; 
 	const QList <QDomElement> dom_inputs = inputs;
 	
-	for (DynamicElementTextItem *deti : conv_deti_list)
+
+
+    for (DynamicElementTextItem *deti : conv_deti_list) // Texts from element definition (elements collection)
 	{
-		for(const QDomElement& dom_input : dom_inputs)
+        for(const QDomElement& dom_input : dom_inputs) // Inputs in diagram section
 		{
 				//we use the same method used in ElementTextItem::fromXml to compar and know if the input dom element is for one of the text stored.
 				//The comparaison is made from the text position : if the position of the text is the same as the position stored in 'input' dom element
@@ -817,7 +830,7 @@ bool Element::fromXml(QDomElement &e, QHash<int, Terminal *> &table_id_adr, bool
 		group->fromXml(qde);
 	}
 	
-		//load informations
+        //load elementInformations from diagram section
 	DiagramContext dc;
 	dc.fromXml(e.firstChildElement("elementInformations"), "elementInformation");
 		/**
@@ -826,7 +839,6 @@ bool Element::fromXml(QDomElement &e, QHash<int, Terminal *> &table_id_adr, bool
 		 * this mean the label was made before commit 4791 (0.51 dev). So we swap the value stored in "label" to "formula" as expected.
 		 * @TODO remove this code at version 0.7 or more (probably useless).
 		 */
-#pragma message("@TODO remove this code for qet 0.7 or later")
 	if (dc["label"].toString().contains("%") && dc["formula"].toString().isNull())
 	{
 		dc.addValue("formula", dc["label"]);
@@ -992,6 +1004,12 @@ bool Element::fromXml(QDomElement &e, QHash<int, Terminal *> &table_id_adr, bool
 			}
 		}
 	}
+
+    // TODO: remove in later version end
+
+//#######################################################################################################################
+//####    END     #######################################################################################################
+//#######################################################################################################################
     m_state = QET::GIOK;
 	return(true);
 }

sources/qetxml.cpp

@@ -23,12 +23,11 @@
 #include <QFont>
 
 /**
-	@brief QETXML::penToXml
-	Write attribute of a QPen in xml element
-	@param parent_document : parent document for create the QDomElement
-	@param pen : the pen to store
-	@return : A QDomElement with the attribute stored.
-	The tagName of QDomeElement is "pen".
+ * @brief QETXML::penToXml
+ * Write attribute of a QPen in xml element
+ * @param parent_document : parent document for create the QDomElement
+ * @param pen : the pen to store
+ * @return : A QDomElement with the attribute stored. The tagName of QDomeElement is "pen".
  */
 QDomElement QETXML::penToXml(QDomDocument &parent_document,const QPen& pen)
 {
@@ -53,11 +52,11 @@ QDomElement QETXML::penToXml(QDomDocument &parent_document,const QPen& pen)
 }
 
 /**
-	@brief QETXML::penFromXml
-	Build a QPen from a xml description
-	@param element, The QDomElement that describe the pen
-	@return the created pen. If @element is null or tagName isn't "pen"
-	return a default constructed QPen
+ * @brief QETXML::penFromXml
+ * Build a QPen from a xml description
+ * @param element, The QDomElement that describe the pen
+ * @return the created pen. If @element is null or tagName isn't "pen"
+ * return a default constructed QPen
  */
 QPen QETXML::penFromXml(const QDomElement &element)
 {
@@ -87,15 +86,13 @@ QPen QETXML::penFromXml(const QDomElement &element)
 }
 
 /**
-	@brief QETXML::brushToXml
-	Write attribute of a QBrush in xml element
-	@param parent_document : parent document for create the QDomElement
-	@param brush : the brush to store
-	@return A QDomElement with the attribute stored.
-	The tagName of QDomeElement is "brush".
+ * @brief QETXML::brushToXml
+ * Write attribute of a QBrush in xml element
+ * @param parent_document : parent document for create the QDomElement
+ * @param brush : the brush to store
+ * @return A QDomElement with the attribute stored. The tagName of QDomeElement is "brush".
  */
-QDomElement QETXML::brushToXml(QDomDocument &parent_document,
-			       const QBrush& brush)
+QDomElement QETXML::brushToXml(QDomDocument &parent_document, const QBrush& brush)
 {
 	QDomElement element = parent_document.createElement("brush");
 
@@ -126,11 +123,11 @@ QDomElement QETXML::brushToXml(QDomDocument &parent_document,
 }
 
 /**
-	@brief QETXML::brushFromXml
-	Build a QBrush from a xml description
-	@param element, the QDomElement that describe the pen
-	@return the created brush. If @element is null or tagName isn't "brush"
-	return a default constructed QBrush
+ * @brief QETXML::brushFromXml
+ * Build a QBrush from a xml description
+ * @param element, the QDomElement that describe the pen
+ * @return the created brush. If @element is null or tagName isn't "brush"
+ * return a default constructed QBrush
  */
 QBrush QETXML::brushFromXml(const QDomElement &element)
 {
@@ -161,20 +158,15 @@ QBrush QETXML::brushFromXml(const QDomElement &element)
 }
 
 /**
-	@brief QETXML::fileSystemDirToXmlCollectionDir
-	@param document : owner document of returned QDomElement,
-	use to create the QDomElement.
-	@param dir : file system direcory to convert to QDomElement directory
-	@param rename : by default the attribute "name" of the returned
-	QDomElement is the same name of @dir
-	but we can override itwith @rename
-	@return A file system directory converted to a QDomElement directory
-	ready to be inserted into a XmlElementCollection.
-	If the QDomElement can't be created, return a null QDomElement.
+ * @brief QETXML::fileSystemDirToXmlCollectionDir
+ * @param document : owner document of returned QDomElement, use to create the QDomElement.
+ * @param dir : file system direcory to convert to QDomElement directory
+ * @param rename : by default the attribute "name" of the returned QDomElement is the same name of @dir
+ * but we can override itwith @rename
+ * @return A file system directory converted to a QDomElement directory ready to be inserted into a XmlElementCollection.
+ * If the QDomElement can't be created, return a null QDomElement.
  */
-QDomElement QETXML::fileSystemDirToXmlCollectionDir(QDomDocument &document,
-						    const QDir &dir,
-						    const QString& rename)
+QDomElement QETXML::fileSystemDirToXmlCollectionDir(QDomDocument &document, const QDir &dir, const QString& rename)
 {
 	if (!dir.exists()) return QDomElement();
 
@@ -183,9 +175,7 @@ QDomElement QETXML::fileSystemDirToXmlCollectionDir(QDomDocument &document,
 
 		//Get the traduction of this directory
 	QFile qet_dir(dir.filePath("qet_directory"));
-	if (qet_dir.exists() && qet_dir.open(
-				QIODevice::ReadOnly
-				| QIODevice::Text))
+	if (qet_dir.exists() && qet_dir.open(QIODevice::ReadOnly | QIODevice::Text))
 	{
 			//Get the content of the file
 		QDomDocument trad_document;
@@ -206,21 +196,15 @@ QDomElement QETXML::fileSystemDirToXmlCollectionDir(QDomDocument &document,
 }
 
 /**
-	@brief QETXML::fileSystemElementToXmlCollectionElement
-	@param document : owner document of returned QDomElement,
-	use to create the QDomElement.
-	@param file : file system element file to convert to QDomElement;
-	@param rename : by default the attribute "name" of
-	the returned QDomElement is the same name of @file
-	but we can override itwith @rename
-	@return A file system element converted to a QDomElement
-	ready to be inserted into a XmlElementCollection
-	If the QDomElement can't be created, return a null QDomElement
+ * @brief QETXML::fileSystemElementToXmlCollectionElement
+ * @param document : owner document of returned QDomElement, use to create the QDomElement.
+ * @param file : file system element file to convert to QDomElement;
+ * @param rename : by default the attribute "name" of the returned QDomElement is the same name of @file
+ * but we can override itwith @rename
+ * @return A file system element converted to a QDomElement ready to be inserted into a XmlElementCollection
+ * If the QDomElement can't be created, return a null QDomElement
  */
-QDomElement QETXML::fileSystemElementToXmlCollectionElement(
-		QDomDocument &document,
-		QFile &file,
-		const QString& rename)
+QDomElement QETXML::fileSystemElementToXmlCollectionElement(QDomDocument &document, QFile &file, const QString& rename)
 {
 	if (file.exists() && file.open(QIODevice::ReadOnly | QIODevice::Text))
 	{
@@ -245,18 +229,14 @@ QDomElement QETXML::fileSystemElementToXmlCollectionElement(
 }
 
 /**
-	@brief QETXML::writeXmlFile
-	Export an XML document to an UTF-8 text file indented with 4 spaces,
-	with LF end of lines and no BOM.
-	@param xml_document : An XML document to be exported
-	@param file_path : Path to the file to be written
-	@param error_message : If non-zero, will contain an error message
-	explaining what happened when this function returns false.
-	@return false if an error occurred, true otherwise
+ * @brief QETXML::writeXmlFile
+ * 	Export an XML document to an UTF-8 text file indented with 4 spaces, with LF end of lines and no BOM.
+ * @param xml_document : An XML document to be exported
+ * @param file_path : Path to the file to be written
+ * @param error_message : If non-zero, will contain an error message explaining what happened when this function returns false.
+ * @return false if an error occurred, true otherwise
  */
-bool QETXML::writeXmlFile(const QDomDocument &xml_document,
-			  const QString &file_path,
-			  QString *error_message)
+bool QETXML::writeXmlFile(const QDomDocument &xml_document, const QString &file_path, QString *error_message)
 {
 	QFile file(file_path);
 
@@ -266,9 +246,7 @@ bool QETXML::writeXmlFile(const QDomDocument &xml_document,
 	{
 		if (error_message)
 		{
-			*error_message = QString(
-						QObject::tr(
-							"Impossible d'ouvrir le fichier %1 en écriture, erreur %2 rencontrée.",
+			*error_message = QString(QObject::tr("Impossible d'ouvrir le fichier %1 en écriture, erreur %2 rencontrée.",
 												 "error message when attempting to write an XML file")
 									 ).arg(file_path).arg(file.error());
 		}
@@ -285,17 +263,14 @@ bool QETXML::writeXmlFile(const QDomDocument &xml_document,
 }
 
 /**
-	@brief QETXML::textToDomElement
-	Return a QDomElement, created from @document,
-	with tag name @tag_name and text @value.
-	@param document
-	@param tag_name
-	@param value
-	@return a QDomElement, created from @document
+ * @brief QETXML::textToDomElement
+ * Return a QDomElement, created from @document, with tag name @tag_name and text @value.
+ * @param document
+ * @param tag_name
+ * @param value
+ * @return
  */
-QDomElement QETXML::textToDomElement(QDomDocument &document,
-				     const QString& tag_name,
-				     const QString& value)
+QDomElement QETXML::textToDomElement(QDomDocument &document, const QString& tag_name, const QString& value)
 {
 	QDomElement element = document.createElement(tag_name);
 	QDomText text = document.createTextNode(value);
@@ -305,19 +280,15 @@ QDomElement QETXML::textToDomElement(QDomDocument &document,
 }
 
 /**
-	@brief QETXML::directChild
-	@param element
-	@param tag_name
-	@return All direct child of @element  with the tag name @tag_name
+ * @brief QETXML::directChild
+ * @param element
+ * @param tag_name
+ * @return All direct child of @element  with the tag name @tag_name
  */
-QVector<QDomElement> QETXML::directChild(const QDomElement &element,
-					 const QString &tag_name)
+QVector<QDomElement> QETXML::directChild(const QDomElement &element, const QString &tag_name)
 {
 	QVector<QDomElement> return_list;
-	for (
-	     QDomNode node = element.firstChild() ;
-	     !node.isNull() ;
-	     node = node.nextSibling())
+	for (QDomNode node = element.firstChild() ; !node.isNull() ; node = node.nextSibling())
 	{
 		if (!node.isElement()) continue;
 		QDomElement element = node.toElement();
@@ -329,34 +300,25 @@ QVector<QDomElement> QETXML::directChild(const QDomElement &element,
 }
 
 /**
-	@brief QETXML::subChild
-	@param element
-	@param parent_tag_name
-	@param children_tag_name
-	@return When given an xml dom element @element,
-	returns a vector of all children dom_elements tagged @children_tag_name
-	nested in the parent dom elements tagged parent_tag_name,
-	themselves children of the dom element @element.
+ * @brief QETXML::subChild
+ * @param element
+ * @param parent_tag_name
+ * @param children_tag_name
+ * @return When given an xml dom element @element,
+ * returns a vector of all children dom_elements tagged @children_tag_name
+ * nested in the parent dom elements tagged parent_tag_name, themselves children of the dom element @element.
  */
-QVector<QDomElement> QETXML::subChild(const QDomElement &element,
-				      const QString parent_tag_name,
-				      const QString &children_tag_name)
+QVector<QDomElement> QETXML::subChild(const QDomElement &element, const QString parent_tag_name, const QString &children_tag_name)
 {
 	QVector<QDomElement> return_list;
 
-	for (
-	     QDomNode child = element.firstChild() ;
-	     !child.isNull() ;
-	     child = child.nextSibling())
+	for (QDomNode child = element.firstChild() ; !child.isNull() ; child = child.nextSibling())
 	{
 		QDomElement parents = child.toElement();
 		if (parents.isNull() || parents.tagName() != parent_tag_name)
 			continue;
 
-		for (
-		     QDomNode node_children = parents.firstChild() ;
-		     !node_children.isNull() ;
-		     node_children = node_children.nextSibling())
+		for (QDomNode node_children = parents.firstChild() ; !node_children.isNull() ; node_children = node_children.nextSibling())
 		{
 			QDomElement n_children = node_children.toElement();
 			if (!n_children.isNull() && n_children.tagName() == children_tag_name)
@@ -368,33 +330,28 @@ QVector<QDomElement> QETXML::subChild(const QDomElement &element,
 }
 
 /**
-	@brief QETXML::marginsToXml
-	Save a QMargins to xml. the xml tag name is 'margins'
-	@param parent_document
-	@param margins
-	@return
+ * @brief QETXML::marginsToXml
+ * Save a QMargins to xml. the xml tag name is 'margins'
+ * @param parent_document
+ * @param margins
+ * @return
  */
-QDomElement QETXML::marginsToXml(QDomDocument &parent_document,
-				 const QMargins &margins)
+QDomElement QETXML::marginsToXml(QDomDocument &parent_document, const QMargins &margins)
 {
 	auto dom_ = parent_document.createElement("margins");
-	auto text_ = parent_document.createTextNode(
-				QString::number(margins.left())
-				+ QString(";")
-				+ QString::number(margins.top())
-				+ QString(";")
-				+ QString::number(margins.right())
-				+ QString(";")
-				+ QString::number(margins.bottom()));
+	auto text_ = parent_document.createTextNode(QString::number(margins.left())  + QString(";") +
+												QString::number(margins.top())   + QString(";") +
+												QString::number(margins.right()) + QString(";") +
+												QString::number(margins.bottom()));
 	dom_.appendChild(text_);
 	return  dom_;
 }
 
 /**
-	@brief QETXML::marginsFromXml
-	@param element
-	@return a QMargins from an xml description.
-	The tag name must ne 'margins'
+ * @brief QETXML::marginsFromXml
+ * @param element
+ * @return a QMargins from an xml description.
+ * The tag name must ne 'margins'
  */
 QMargins QETXML::marginsFromXml(const QDomElement &element)
 {
@@ -404,35 +361,22 @@ QMargins QETXML::marginsFromXml(const QDomElement &element)
 
 	auto margins_ = element.text().split(";");
 	if (margins_.size() == 4) {
-		return QMargins(
-					margins_.at(0).toInt(),
-					margins_.at(1).toInt(),
-					margins_.at(2).toInt(),
-					margins_.at(3).toInt());
+		return QMargins(margins_.at(0).toInt(), margins_.at(1).toInt(), margins_.at(2).toInt(), margins_.at(3).toInt());
 	} else {
 		return QMargins();
 	}
 }
 
 /**
-	@brief QETXML::modelHeaderDataToXml
-	Save to xml element all header data specified
-	by @horizontal_section_role and @vertical_section_role
-	@param parent_document
-	@param model
-	@param horizontal_section_role : key as header section and value
-	as list of roles to save in xml
-	@param vertical_section_role :key as header section and value
-	as list of roles to save in xml
-	@return
+ * @brief QETXML::modelHeaderDataToXml
+ * Save to xml element all header data specified by @horizontal_section_role and @vertical_section_role
+ * @param parent_document
+ * @param model
+ * @param horizontal_section_role : key as header section and value as list of roles to save in xml
+ * @param vertical_section_role :key as header section and value as list of roles to save in xml
+ * @return
  */
-QDomElement QETXML::modelHeaderDataToXml(
-		QDomDocument &parent_document,
-		const QAbstractItemModel *model,
-		QHash<int,
-		QList<int>> horizontal_section_role,
-		QHash<int,
-		QList<int>> vertical_section_role)
+QDomElement QETXML::modelHeaderDataToXml(QDomDocument &parent_document, const QAbstractItemModel *model, QHash<int, QList<int>> horizontal_section_role, QHash<int, QList<int>> vertical_section_role)
 {
 	auto dom_element = parent_document.createElement("header_data");
 
@@ -457,11 +401,7 @@ QDomElement QETXML::modelHeaderDataToXml(
 					dom_data.setAttribute("role", meta_enum_role.valueToKey(role));
 
 					auto text_node = parent_document.createTextNode("");
-					if (role == Qt::DisplayRole
-						|| role == Qt::EditRole
-						|| role == Qt::ToolTipRole
-						|| role == Qt::StatusTipRole
-						|| role == Qt::WhatsThisRole)
+					if (role == Qt::DisplayRole || role == Qt::EditRole || role == Qt::ToolTipRole || role == Qt::StatusTipRole || role == Qt::WhatsThisRole)
 					{
 						text_node.setData(variant.toString());
 					}
@@ -493,13 +433,12 @@ QDomElement QETXML::modelHeaderDataToXml(
 }
 
 /**
-	@brief QETXML::modelHeaderDataFromXml
-	Restore from xml modele header data
-	@param element
-	@param model
+ * @brief QETXML::modelHeaderDataFromXml
+ * Restore from xml modele header data
+ * @param element
+ * @param model
  */
-void QETXML::modelHeaderDataFromXml(const QDomElement &element,
-				    QAbstractItemModel *model)
+void QETXML::modelHeaderDataFromXml(const QDomElement &element, QAbstractItemModel *model)
 {
 	if (element.tagName() != "header_data")
 		return;
@@ -510,25 +449,12 @@ void QETXML::modelHeaderDataFromXml(const QDomElement &element,
 	for (auto child : QETXML::directChild(element, "data"))
 	{
 		auto section_ = child.attribute("section", "-1").toInt();
-		auto orientation_ = Qt::Orientation(
-					meta_enum_orientation.keyToValue(
-						child.attribute(
-							"orientation",
-							"Horizontal"
-							).toStdString().data()));
-		auto role_ = meta_enum_role.keyToValue(
-					child.attribute(
-						"role",
-						"DisplayRole"
-						).toStdString().data());
+		auto orientation_ = Qt::Orientation(meta_enum_orientation.keyToValue(child.attribute("orientation", "Horizontal").toStdString().data()));
+		auto role_ = meta_enum_role.keyToValue(child.attribute("role", "DisplayRole").toStdString().data());
 		auto text_ = child.text();
 		QVariant data_;
 
-		if (role_ == Qt::DisplayRole
-				|| role_ == Qt::EditRole
-				|| role_ == Qt::ToolTipRole
-				|| role_ == Qt::StatusTipRole
-				|| role_ == Qt::WhatsThisRole) {
+		if (role_ == Qt::DisplayRole || role_ == Qt::EditRole || role_ == Qt::ToolTipRole || role_ == Qt::StatusTipRole || role_ == Qt::WhatsThisRole) {
 			data_ = text_;
 		}
 		else if (role_ == Qt::FontRole)

sources/qetxml.h

@@ -34,45 +34,24 @@ namespace QETXML
     QDomElement penToXml(QDomDocument &parent_document, const QPen& pen);
     QPen penFromXml (const QDomElement &element);
 
-	QDomElement brushToXml (QDomDocument &parent_document,
-				const QBrush& brush);
+	QDomElement brushToXml (QDomDocument &parent_document, const QBrush& brush);
 	QBrush brushFromXml (const QDomElement &element);
 
-	QDomElement fileSystemDirToXmlCollectionDir (
-			QDomDocument &document,
-			const QDir &dir,
-			const QString& rename = QString());
-	QDomElement fileSystemElementToXmlCollectionElement (
-			QDomDocument &document,
-			QFile &file,
-			const QString& rename = QString());
+	QDomElement fileSystemDirToXmlCollectionDir (QDomDocument &document, const QDir &dir, const QString& rename = QString());
+	QDomElement fileSystemElementToXmlCollectionElement (QDomDocument &document, QFile &file, const QString& rename = QString());
 
-	bool writeXmlFile(const QDomDocument &xml_document,
-			  const QString &file_path,
-			  QString *error_message = nullptr);
+	bool writeXmlFile(const QDomDocument &xml_document, const QString &file_path, QString *error_message = nullptr);
 
-	QDomElement textToDomElement (QDomDocument &document,
-				      const QString& tag_name,
-				      const QString& value);
+	QDomElement textToDomElement (QDomDocument &document, const QString& tag_name, const QString& value);
 
-	QVector <QDomElement> directChild(const QDomElement &element,
-					  const QString &tag_name);
-	QVector <QDomElement> subChild(const QDomElement &element,
-				       const QString parent_tag_name,
-				       const QString &children_tag_name);
+	QVector <QDomElement> directChild(const QDomElement &element, const QString &tag_name);
+	QVector <QDomElement> subChild(const QDomElement &element, const QString parent_tag_name, const QString &children_tag_name);
 
-	QDomElement marginsToXml (QDomDocument &parent_document,
-				  const QMargins &margins);
+	QDomElement marginsToXml (QDomDocument &parent_document, const QMargins &margins);
 	QMargins marginsFromXml(const QDomElement &element);
 
-	QDomElement modelHeaderDataToXml(QDomDocument &parent_document,
-					 const QAbstractItemModel *model,
-					 QHash<int,
-					 QList<int>> horizontal_section_role,
-					 QHash<int,
-					 QList<int>> vertical_section_role);
-	void modelHeaderDataFromXml(const QDomElement &element,
-				    QAbstractItemModel *model);
+	QDomElement modelHeaderDataToXml(QDomDocument &parent_document, const QAbstractItemModel *model, QHash<int, QList<int>> horizontal_section_role, QHash<int, QList<int>> vertical_section_role);
+	void modelHeaderDataFromXml(const QDomElement &element, QAbstractItemModel *model);
 }
 
 #endif // QETXML_H

sources/richtext/richtexteditor.cpp

@@ -739,7 +739,6 @@ QString RichTextEditor::text(Qt::TextFormat format) const
 			break;
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 		case Qt::MarkdownText: //This enum value was added in Qt 5.14.
 			break;
 #endif

sources/titleblocktemplate.cpp

@@ -338,7 +338,6 @@ void TitleBlockTemplate::parseRows(const QString &rows_string) {
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)	// ### Qt 6: remove
 	QStringList rows_descriptions = rows_string.split(QChar(';'), QString::SkipEmptyParts);
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 	QStringList rows_descriptions = rows_string.split(QChar(';'), Qt::SkipEmptyParts);
 #endif
 	foreach (QString rows_description, rows_descriptions) {
@@ -366,7 +365,6 @@ void TitleBlockTemplate::parseColumns(const QString &cols_string) {
 #if QT_VERSION < QT_VERSION_CHECK(5, 14, 0)	// ### Qt 6: remove
 	QStringList cols_descriptions = cols_string.split(QChar(';'), QString::SkipEmptyParts);
 #else
-#pragma message("@TODO remove code for QT 5.14 or later")
 	QStringList cols_descriptions = cols_string.split(QChar(';'), Qt::SkipEmptyParts);
 #endif
 	foreach (QString cols_description, cols_descriptions) {

sources/ui/aboutqetdialog.cpp

@@ -21,13 +21,7 @@
 
 #include <QThread>
 #include <QDate>
-#include <QScreen>
-#include <QProcess>
 
-/**
-	@brief AboutQETDialog::AboutQETDialog
-	@param parent
-*/
 AboutQETDialog::AboutQETDialog(QWidget *parent) :
 	QDialog(parent),
 	ui(new Ui::AboutQETDialog)
@@ -42,17 +36,11 @@ AboutQETDialog::AboutQETDialog(QWidget *parent) :
 	setLicence();
 }
 
-/**
-	@brief AboutQETDialog::~AboutQETDialog
-*/
 AboutQETDialog::~AboutQETDialog()
 {
 	delete ui;
 }
 
-/**
-	@brief AboutQETDialog::setAbout
-*/
 void AboutQETDialog::setAbout()
 {
 
@@ -67,9 +55,6 @@ void AboutQETDialog::setAbout()
 	ui->m_about_label->setText(str);
 }
 
-/**
-	@brief AboutQETDialog::setAuthors
-*/
 void AboutQETDialog::setAuthors()
 {
 	addAuthor(ui->m_author_label, "Benoît Ansieau",     "benoit@qelectrotech.org",     tr("Idée originale"));
@@ -81,9 +66,6 @@ void AboutQETDialog::setAuthors()
 	addAuthor(ui->m_author_label, "Abhishek Bansal",    "abhishek@qelectrotech.org",   tr("Développement"));
 }
 
-/**
-	@brief AboutQETDialog::setTranslators
-*/
 void AboutQETDialog::setTranslators()
 {
 	addAuthor(ui->m_translators_label, "Alfredo Carreto",                           "electronicos_mx@yahoo.com.mx",   tr("Traduction en espagnol"));
@@ -112,9 +94,6 @@ void AboutQETDialog::setTranslators()
 	addAuthor(ui->m_translators_label, "Gábor Gubányi",                             "gubanyig@gmail.com",             tr("Traduction en hongrois"));
 }
 
-/**
-	@brief AboutQETDialog::setContributors
-*/
 void AboutQETDialog::setContributors()
 {
 	addAuthor(ui->m_contrib_label, "Remi Collet",         "remi@fedoraproject.org",              tr("Paquets Fedora et Red Hat"));
@@ -138,9 +117,6 @@ void AboutQETDialog::setContributors()
 	addAuthor(ui->m_contrib_label, "Maximilian Federle",   "",                                   tr("Paquets Snap"));
 }
 
-/**
-	@brief AboutQETDialog::setVersion
-*/
 void AboutQETDialog::setVersion()
 {
 	QString str = "<span style=\"font-weight:bold;font-size:16pt;\">QElectroTech V " + QET::displayedVersion + "</span>";
@@ -153,12 +129,6 @@ void AboutQETDialog::setVersion()
 	compilation_info += " : " + QString(__TIME__);
 	compilation_info += " <br>Run with Qt "+ QString(qVersion());
 	compilation_info += " using" + QString(" %1 thread(s)").arg(QThread::idealThreadCount());
-	QProcess macoscpuinfo;
-	macoscpuinfo.start("bash", QStringList() << "-c" << "sysctl -n machdep.cpu.brand_string");
-	macoscpuinfo.waitForFinished();
-	QString macosOutput = macoscpuinfo.readAllStandardOutput();
-	compilation_info +=  "<br>"" CPU : " + QString(macosOutput.toLocal8Bit().constData());
-
 	compilation_info += "<br>" "  OS : " +  QString(QSysInfo::kernelType());
 	compilation_info += "  -   " + QString(QSysInfo::currentCpuArchitecture());
 	compilation_info += " -  Version :    " + QString(QSysInfo::prettyProductName());
@@ -170,61 +140,15 @@ void AboutQETDialog::setVersion()
 	compilation_info += " : " + QString(__TIME__);
 	compilation_info += " <br>Run with Qt "+ QString(qVersion());
 	compilation_info += " using" + QString(" %1 thread(s)").arg(QThread::idealThreadCount());
-	
-	QString OSName = QSysInfo::kernelType();
-	if (OSName == "linux")
-	{
-	QProcess linuxcpuinfo;
-	linuxcpuinfo.start("bash", QStringList() << "-c" << "cat /proc/cpuinfo |grep 'model name' | uniq");
-	linuxcpuinfo.waitForFinished();
-	QString linuxOutput = linuxcpuinfo.readAllStandardOutput();
-	compilation_info +=  "<br>"" CPU : " + QString(linuxOutput.toLocal8Bit().constData());
-	
-	QProcess p;
-	p.start("awk", QStringList() << "/MemTotal/ { print $2 }" << "/proc/meminfo");
-	p.waitForFinished();
-	QString memory = p.readAllStandardOutput();
-	compilation_info += "<br>" + QString("RAM Total : %1 MB").arg(memory.toLong() / 1024);
-	p.close();
-	
-	QProcess qp;
-	qp.start("awk", QStringList() << "/MemAvailable/ {print $2}" << "/proc/meminfo");
-	qp.waitForFinished();
-	QString AvailableMemory = qp.readAllStandardOutput();
-	compilation_info += "<br>" + QString("RAM Available : %1 MB").arg(AvailableMemory.toLong() / 1024);
-	qp.close();
-	
-	QProcess linuxgpuinfo;
-	linuxgpuinfo.start("bash", QStringList() << "-c" << "lspci | grep VGA | cut -d : -f 3");
-	linuxgpuinfo.waitForFinished();
-	QString linuxGPUOutput = linuxgpuinfo.readAllStandardOutput();
-	compilation_info += "<br>"" GPU : " + QString(linuxGPUOutput.toLocal8Bit().constData());
-	
-	}
-	
 	compilation_info += "<br>" "  OS : " +  QString(QSysInfo::kernelType());
 	compilation_info += "  -   " + QString(QSysInfo::currentCpuArchitecture());
 	compilation_info += " -  Version :    " + QString(QSysInfo::prettyProductName());
 	compilation_info += "</br>" " -  Kernel :     " + QString(QSysInfo::kernelVersion());
 #endif
 #endif
-	compilation_info += "<br>  *** Qt screens *** </br>";
-	const auto screens = qApp->screens();
-	for (int ii = 0; ii < screens.count(); ++ii) {
-	  compilation_info += "<br> ( "
-			  + QString::number(ii + 1)
-			  + " : "
-			  + QString::number(screens[ii]->geometry().width() * screens[ii]->devicePixelRatio())
-			  + " x "
-			  + QString::number(screens[ii]->geometry().height() * screens[ii]->devicePixelRatio())
-			  + " ) </br>";
-	}
 	ui->m_version_label->setText(str + compilation_info);
 }
 
-/**
-	@brief AboutQETDialog::setLibraries
-*/
 void AboutQETDialog::setLibraries()
 {
 	addLibrary(ui->m_libraries_label, "KDE lib",            "https://api.kde.org");
@@ -232,21 +156,18 @@ void AboutQETDialog::setLibraries()
 	addLibrary(ui->m_libraries_label, "pugixml",            "https://pugixml.org");
 }
 
-/**
-	@brief AboutQETDialog::setLicence
-*/
 void AboutQETDialog::setLicence()
 {
 	ui->m_license_text_edit->setPlainText(QET::license());
 }
 
 /**
-	@brief AboutQETDialog::addAuthor
-	Adds a person to the list of authors
-	@param label : QLabel which will add the person
-	@param name : Name of person
-	@param email : E-mail address of the person
-	@param work : Function / work done by the person
+ * @brief AboutQETDialog::addAuthor
+ * Adds a person to the list of authors
+ * @param label : QLabel which will add the person
+ * @param name : Name of person
+ * @param email : E-mail address of the person
+ * @param work : Function / work done by the person
  */
 void AboutQETDialog::addAuthor(QLabel *label, const QString &name, const QString &email, const QString &work)
 {
@@ -259,12 +180,6 @@ void AboutQETDialog::addAuthor(QLabel *label, const QString &name, const QString
 	label->setText(new_text);
 }
 
-/**
-	@brief AboutQETDialog::addLibrary
-	@param label
-	@param name
-	@param link
-*/
 void AboutQETDialog::addLibrary(QLabel *label, const QString &name, const QString &link)
 {
 	QString new_text = label->text();

sources/ui/aboutqetdialog.h

@@ -26,9 +26,6 @@ namespace Ui {
 	class AboutQETDialog;
 }
 
-/**
-	@brief The AboutQETDialog class
-*/
 class AboutQETDialog : public QDialog
 {
 	Q_OBJECT
@@ -45,13 +42,8 @@ class AboutQETDialog : public QDialog
 		void setVersion();
 		void setLibraries();
 		void setLicence();
-		void addAuthor(QLabel *label,
-			       const QString &name,
-			       const QString &email,
-			       const QString &work);
-		void addLibrary(QLabel *label,
-				const QString &name,
-				const QString &link);
+		void addAuthor(QLabel *label, const QString &name, const QString &email, const QString &work);
+		void addLibrary(QLabel *label, const QString &name, const QString &link);
 
 	private:
 		Ui::AboutQETDialog *ui;

sources/ui/bomexportdialog.cpp

@@ -61,7 +61,6 @@ BOMExportDialog::BOMExportDialog(QETProject *project, QWidget *parent) :
 #if QT_VERSION < QT_VERSION_CHECK(5, 15, 0)	// ### Qt 6: remove
 	connect(&m_button_group, static_cast<void (QButtonGroup::*)(int)>(&QButtonGroup::buttonClicked), [this](int id)
 #else
-#pragma message("@TODO remove code for QT 5.15 or later")
 	connect(&m_button_group, static_cast<void (QButtonGroup::*)(int)>(&QButtonGroup::idClicked), [this](int id)
 #endif
 	{
@@ -155,7 +154,6 @@ int BOMExportDialog::exec()
 #if QT_VERSION < QT_VERSION_CHECK(5, 15, 0)	// ### Qt 6: remove
 				stream << getBom() << endl;
 #else
-#pragma message("@TODO remove code for QT 5.15 or later")
 				stream << getBom() << &Qt::endl(stream);
 #endif
 			}

sources/ui/compositetexteditdialog.cpp

@@ -16,7 +16,6 @@ CompositeTextEditDialog::CompositeTextEditDialog(DynamicElementTextItem *text, Q
 	m_default_text = m_text->compositeText();
 	ui->m_plain_text_edit->setPlainText(m_default_text);
 #if QT_VERSION >= 0x050300
-#pragma message("@TODO remove code for QT 5.3 or later")
 	ui->m_plain_text_edit->setPlaceholderText(tr("Entrée votre texte composé ici, en vous aidant des variables disponible"));
 #endif
 	setUpComboBox();
@@ -30,7 +29,6 @@ CompositeTextEditDialog::CompositeTextEditDialog(QString text, QWidget *parent)
 	m_default_text = std::move(text);
 	ui->m_plain_text_edit->setPlainText(m_default_text);
 #if QT_VERSION >= 0x050300
-#pragma message("@TODO remove code for QT 5.3 or later")
 	ui->m_plain_text_edit->setPlaceholderText(tr("Entrée votre texte composé ici, en vous aidant des variables disponible"));
 #endif
 	setUpComboBox();

sources/ui/dynamicelementtextitemeditor.cpp

@@ -186,6 +186,10 @@ QUndoCommand *DynamicElementTextItemEditor::associatedUndo() const
 		return nullptr;
 }
 
+/*!
+ * \brief DynamicElementTextItemEditor::dataEdited
+ * Apply changes to the text item. It is called when dataChanged() signal is called
+ */
 void DynamicElementTextItemEditor::dataEdited()
 {
 	if (m_live_edit)

sources/ui/dynamicelementtextitemeditor.h

@@ -29,6 +29,10 @@ namespace Ui {
 	class DynamicElementTextItemEditor;
 }
 
+/*!
+ * \brief The DynamicElementTextItemEditor class
+ * Widget used to modify the properties of DynamicElementTextItem.
+ */
 class DynamicElementTextItemEditor : public AbstractElementPropertiesEditorWidget
 {
     Q_OBJECT

sources/ui/dynamicelementtextmodel.cpp

@@ -57,6 +57,10 @@ static int adjust_grp_row         = 4;
 static int frame_grp_row          = 5;
 static int hold_to_bottom_grp_row = 6;
 
+const char* user_text = "Texte utilisateur";
+const char* element_information = "Information de l'élément";
+const char* composite_text = "Texte composé";
+
 DynamicElementTextModel::DynamicElementTextModel(Element *element, QObject *parent) :
 	QStandardItemModel(parent),
 	m_element(element)
@@ -136,9 +140,9 @@ QList<QStandardItem *> DynamicElementTextModel::itemsForText(DynamicElementTextI
     src->setFlags(Qt::ItemIsSelectable | Qt::ItemIsEnabled);
     
 	QString title;
-	if (deti->textFrom() == DynamicElementTextItem::UserText) title = tr("Texte utilisateur");
-	else if (deti->textFrom() == DynamicElementTextItem::ElementInfo) title = tr("Information de l'élément");
-	else title =  tr("Texte composé");
+    if (deti->textFrom() == DynamicElementTextItem::UserText) title = tr(user_text);
+    else if (deti->textFrom() == DynamicElementTextItem::ElementInfo) title = tr(element_information);
+    else title =  tr(composite_text);
     QStandardItem *srca = new QStandardItem(title);
     srca->setFlags(Qt::ItemIsSelectable | Qt::ItemIsEnabled | Qt::ItemIsEditable);
     srca->setData(textFrom, Qt::UserRole+1);
@@ -172,7 +176,7 @@ QList<QStandardItem *> DynamicElementTextModel::itemsForText(DynamicElementTextI
     qsi->appendRow(qsi_list);
 	
 		//Composite text
-	QStandardItem *composite = new QStandardItem(tr("Texte composé"));
+    QStandardItem *composite = new QStandardItem(tr(composite_text));
 	composite->setFlags(Qt::ItemIsSelectable | Qt::ItemIsEnabled);
 	
 	DiagramContext dc;
@@ -397,7 +401,7 @@ DynamicElementTextItem *DynamicElementTextModel::textFromItem(QStandardItem *ite
 	
 	
 	QStandardItem *text_item = item;
-	while (text_item->parent())
+    while (text_item->parent()) // recursive search for the highest parent
 		text_item = text_item->parent();
 	
 	if (m_texts_list.values().contains(text_item)) //The item is a text
@@ -458,26 +462,26 @@ QUndoCommand *DynamicElementTextModel::undoForEditedText(DynamicElementTextItem
 	QStandardItem *text_qsi = m_texts_list.value(deti);
 	
 	QString from = text_qsi->child(src_txt_row,1)->data(Qt::DisplayRole).toString();
-	if ((from == tr("Texte utilisateur")) && (deti->textFrom() != DynamicElementTextItem::UserText))
+    if ((from == tr(user_text)) && (deti->textFrom() != DynamicElementTextItem::UserText))
 		new QPropertyUndoCommand(deti, "textFrom", QVariant(deti->textFrom()), QVariant(DynamicElementTextItem::UserText), undo);
-	else if ((from == tr("Information de l'élément")) && (deti->textFrom() != DynamicElementTextItem::ElementInfo))
+    else if ((from == tr(element_information)) && (deti->textFrom() != DynamicElementTextItem::ElementInfo))
 		new QPropertyUndoCommand(deti, "textFrom", QVariant(deti->textFrom()), QVariant(DynamicElementTextItem::ElementInfo), undo);
-	else if ((from == tr("Texte composé")) && (deti->textFrom() != DynamicElementTextItem::CompositeText))
+    else if ((from == tr(composite_text)) && (deti->textFrom() != DynamicElementTextItem::CompositeText))
 		new QPropertyUndoCommand(deti, "textFrom", QVariant(deti->textFrom()), QVariant(DynamicElementTextItem::CompositeText), undo);
 	
-	if(from == tr("Texte utilisateur"))
+    if(from == tr(user_text))
 	{
 		QString text = text_qsi->child(usr_txt_row,1)->data(Qt::DisplayRole).toString();
 		if (text != deti->text())
 			new QPropertyUndoCommand(deti, "text", QVariant(deti->text()), QVariant(text), undo);
 	}
-	else if (from == tr("Information de l'élément"))
+    else if (from == tr(element_information))
 	{
 		QString info_name = text_qsi->child(info_txt_row,1)->data(Qt::UserRole+2).toString();
 		if(info_name != deti->infoName())
 			new QPropertyUndoCommand(deti, "infoName", QVariant(deti->infoName()), QVariant(info_name), undo);
 	}
-	else if (from == tr("Texte composé"))
+    else if (from == tr(composite_text))
 	{
 		QString composite_text = text_qsi->child(compo_txt_row,1)->data(Qt::UserRole+2).toString();
 		if(composite_text != deti->compositeText())
@@ -1112,6 +1116,7 @@ void DynamicElementTextModel::enableSourceText(DynamicElementTextItem *deti, Dyn
 		case DynamicElementTextItem::CompositeText: compo = true;break;
 	}
 
+    m_ignore_item_change = true;
 		//User text
 	qsi->child(usr_txt_row,0)->setEnabled(usr);
 	qsi->child(usr_txt_row,1)->setEnabled(usr);
@@ -1120,6 +1125,7 @@ void DynamicElementTextModel::enableSourceText(DynamicElementTextItem *deti, Dyn
 	qsi->child(info_txt_row,1)->setEnabled(info);
 		//Composite text
 	qsi->child(compo_txt_row,0)->setEnabled(compo);
+    m_ignore_item_change = false;
 	qsi->child(compo_txt_row,1)->setEnabled(compo);
 }
 
@@ -1157,6 +1163,10 @@ void DynamicElementTextModel::enableGroupRotationAndPos(ElementTextItemGroup *gr
 
 void DynamicElementTextModel::itemDataChanged(QStandardItem *qsi)
 {
+
+    if (m_ignore_item_change)
+        return;
+
 	DynamicElementTextItem *deti = textFromItem(qsi);
 	ElementTextItemGroup *etig = groupFromItem(qsi);
 	if (!deti && !etig)
@@ -1170,15 +1180,15 @@ void DynamicElementTextModel::itemDataChanged(QStandardItem *qsi)
 			dc = deti->elementUseForInfo()->elementInformations();
 		
 		if (qsi->data().toInt() == textFrom)
-		{
+        { // change textFrom
 			QString from = qsi->data(Qt::DisplayRole).toString();
 			
-			if (from == tr("Texte utilisateur"))
+            if (from == tr(user_text))
 			{
 				enableSourceText(deti, DynamicElementTextItem::UserText);
 				text_qsi->setData(text_qsi->child(usr_txt_row,1)->data(Qt::DisplayRole).toString());
 			}
-			else if (from == tr("Information de l'élément"))
+            else if (from == tr(element_information))
 			{
 				enableSourceText(deti, DynamicElementTextItem::ElementInfo);
 				QString info = text_qsi->child(info_txt_row,1)->data(Qt::UserRole+2).toString();
@@ -1213,7 +1223,7 @@ void DynamicElementTextModel::itemDataChanged(QStandardItem *qsi)
 		//We emit the signal only if @qsi is in the second column, because the data are stored on this column
 		//the first column is use only for display the title of the property, except for the name of texts group
 	if((m_groups_list.values().contains(qsi) || qsi->column() == 1) && !m_block_dataChanged)
-		emit dataChanged();
+        emit dataChanged(); // TODO: where it goes?
     if(deti) deti->updateXref();
 }
 
@@ -1309,9 +1319,9 @@ void DynamicElementTextModel::updateDataFromText(DynamicElementTextItem *deti, V
 		{
 			switch (deti->textFrom())
 			{
-				case DynamicElementTextItem::UserText: qsi->child(0,1)->setData(tr("Texte utilisateur"), Qt::DisplayRole); break;
-				case DynamicElementTextItem::ElementInfo : qsi->child(0,1)->setData(tr("Information de l'élément"), Qt::DisplayRole); break;
-				case DynamicElementTextItem::CompositeText : qsi->child(0,1)->setData(tr("Texte composé"), Qt::DisplayRole); break;
+                case DynamicElementTextItem::UserText: qsi->child(0,1)->setData(tr(user_text), Qt::DisplayRole); break;
+                case DynamicElementTextItem::ElementInfo : qsi->child(0,1)->setData(tr(element_information), Qt::DisplayRole); break;
+                case DynamicElementTextItem::CompositeText : qsi->child(0,1)->setData(tr(composite_text), Qt::DisplayRole); break;
 			}
 			enableSourceText(deti, deti->textFrom());
 			qsi->setData(deti->toPlainText(), Qt::DisplayRole);
@@ -1448,6 +1458,15 @@ DynamicTextItemDelegate::DynamicTextItemDelegate(QObject *parent) :
     QStyledItemDelegate(parent)
 {}
 
+/*!
+ * \brief DynamicTextItemDelegate::createEditor
+ * Different widgets are used depending of the data which should be shown in the view.
+ * For example for choosing color, a color chooser is used.
+ * \param parent
+ * \param option
+ * \param index
+ * \return
+ */
 QWidget *DynamicTextItemDelegate::createEditor(QWidget *parent, const QStyleOptionViewItem &option, const QModelIndex &index) const
 {
 	switch (index.data(Qt::UserRole+1).toInt())
@@ -1456,9 +1475,9 @@ QWidget *DynamicTextItemDelegate::createEditor(QWidget *parent, const QStyleOpti
 		{
 			QComboBox *qcb = new QComboBox(parent);
 			qcb->setObjectName("text_from");
-			qcb->addItem(tr("Texte utilisateur"));
-			qcb->addItem(tr("Information de l'élément"));
-			qcb->addItem(tr("Texte composé"));
+            qcb->addItem(tr(user_text));
+            qcb->addItem(tr(element_information));
+            qcb->addItem(tr(composite_text));
 			return qcb;
 		}
 		case DynamicElementTextModel::infoText:

sources/ui/dynamicelementtextmodel.h

@@ -106,6 +106,7 @@ class DynamicElementTextModel : public QStandardItemModel
 	QHash <DynamicElementTextItem *, QList<QMetaObject::Connection>> m_hash_text_connect;
 	QHash <ElementTextItemGroup *, QList<QMetaObject::Connection>> m_hash_group_connect;
 	bool m_block_dataChanged = false;
+    bool m_ignore_item_change{false};
 };
 
 class DynamicTextItemDelegate : public QStyledItemDelegate

sources/ui/masterpropertieswidget.cpp

@@ -25,10 +25,10 @@
 #include <linkelementcommand.h>
 
 /**
-	@brief MasterPropertiesWidget::MasterPropertiesWidget
-	Default constructor
-	@param elmt
-	@param parent
+ * @brief MasterPropertiesWidget::MasterPropertiesWidget
+ * Default constructor
+ * @param elmt
+ * @param parent
  */
 MasterPropertiesWidget::MasterPropertiesWidget(Element *elmt, QWidget *parent) :
 	AbstractElementPropertiesEditorWidget(parent),
@@ -43,16 +43,10 @@ MasterPropertiesWidget::MasterPropertiesWidget(Element *elmt, QWidget *parent) :
 	QStringList list;
 	QSettings settings;
 	if (settings.value("genericpanel/folio", false).toBool()) {
-		list << tr("Vignette")
-		     << tr("Label de folio")
-		     << tr("Titre de folio")
-		     << tr("Position");
+		list << tr("Vignette") << tr("Label de folio") << tr("Titre de folio") << tr("Position");
 	}
 	else {
-		list << tr("Vignette")
-		     << tr("N° de folio")
-		     << tr("Titre de folio")
-		     << tr("Position");
+		list << tr("Vignette") << tr("N° de folio") << tr("Titre de folio") << tr("Position");
 	}
 	ui->m_free_tree_widget->setHeaderLabels(list);
 	ui->m_link_tree_widget->setHeaderLabels(list);
@@ -64,22 +58,15 @@ MasterPropertiesWidget::MasterPropertiesWidget(Element *elmt, QWidget *parent) :
 	m_show_element  = new QAction(tr("Montrer l'élément maître"), this);
 	m_save_header_state = new QAction(tr("Enregistrer la disposition"), this);
 	
-	connect(ui->m_free_tree_widget, &QTreeWidget::itemDoubleClicked,
-		this, &MasterPropertiesWidget::showElementFromTWI);
-	connect(ui->m_link_tree_widget, &QTreeWidget::itemDoubleClicked,
-		this, &MasterPropertiesWidget::showElementFromTWI);
+	connect(ui->m_free_tree_widget, &QTreeWidget::itemDoubleClicked, this, &MasterPropertiesWidget::showElementFromTWI);
+	connect(ui->m_link_tree_widget, &QTreeWidget::itemDoubleClicked, this, &MasterPropertiesWidget::showElementFromTWI);
 	
-	connect(ui->m_free_tree_widget, &QTreeWidget::customContextMenuRequested,
-		[this](QPoint point) {this->customContextMenu(point, 1);});
-	connect(ui->m_link_tree_widget, &QTreeWidget::customContextMenuRequested,
-		[this](QPoint point) {this->customContextMenu(point, 2);});
+	connect(ui->m_free_tree_widget, &QTreeWidget::customContextMenuRequested, [this](QPoint point) {this->customContextMenu(point, 1);});
+	connect(ui->m_link_tree_widget, &QTreeWidget::customContextMenuRequested, [this](QPoint point) {this->customContextMenu(point, 2);});
 	
-	connect(m_link_action,   &QAction::triggered,
-		this, &MasterPropertiesWidget::on_link_button_clicked);
-	connect(m_unlink_action, &QAction::triggered,
-		this, &MasterPropertiesWidget::on_unlink_button_clicked);
-	connect(m_show_qtwi,     &QAction::triggered,
-		[this]() {this->showElementFromTWI(this->m_qtwi_at_context_menu,0);});
+	connect(m_link_action,   &QAction::triggered, this, &MasterPropertiesWidget::on_link_button_clicked);
+	connect(m_unlink_action, &QAction::triggered, this, &MasterPropertiesWidget::on_unlink_button_clicked);
+	connect(m_show_qtwi,     &QAction::triggered, [this]() {this->showElementFromTWI(this->m_qtwi_at_context_menu,0);});
 	
 	connect(m_show_element,  &QAction::triggered, [this]()
 	{
@@ -91,8 +78,7 @@ MasterPropertiesWidget::MasterPropertiesWidget(Element *elmt, QWidget *parent) :
 	
 	QHeaderView *qhv = ui->m_free_tree_widget->header();
 	qhv->setContextMenuPolicy(Qt::CustomContextMenu);
-	connect(qhv, &QHeaderView::customContextMenuRequested,
-		this, &MasterPropertiesWidget::headerCustomContextMenuRequested);
+	connect(qhv, &QHeaderView::customContextMenuRequested, this, &MasterPropertiesWidget::headerCustomContextMenuRequested);
 	connect(m_save_header_state, &QAction::triggered, [qhv]()
 	{
 		QByteArray qba = qhv->saveState();
@@ -104,8 +90,8 @@ MasterPropertiesWidget::MasterPropertiesWidget(Element *elmt, QWidget *parent) :
 }
 
 /**
-	@brief MasterPropertiesWidget::~MasterPropertiesWidget
-	Destructor
+ * @brief MasterPropertiesWidget::~MasterPropertiesWidget
+ * Destructor
  */
 MasterPropertiesWidget::~MasterPropertiesWidget()
 {
@@ -119,9 +105,9 @@ MasterPropertiesWidget::~MasterPropertiesWidget()
 }
 
 /**
-	@brief MasterPropertiesWidget::setElement
-	Set the element to be edited
-	@param element
+ * @brief MasterPropertiesWidget::setElement
+ * Set the element to be edited
+ * @param element
  */
 void MasterPropertiesWidget::setElement(Element *element)
 {
@@ -137,37 +123,32 @@ void MasterPropertiesWidget::setElement(Element *element)
 		m_element->setHighlighted(false);
 	
 	if (m_project)
-		disconnect(m_project, SIGNAL(diagramRemoved(QETProject*,Diagram*)),
-			   this, SLOT(diagramWasdeletedFromProject()));
+		disconnect(m_project, SIGNAL(diagramRemoved(QETProject*,Diagram*)), this, SLOT(diagramWasdeletedFromProject()));
 
 	if(Q_LIKELY(element->diagram() && element->diagram()->project()))
 	{
 		m_project = element->diagram()->project();
-		connect(m_project, SIGNAL(diagramRemoved(QETProject*,Diagram*)),
-			this, SLOT(diagramWasdeletedFromProject()));
+		connect(m_project, SIGNAL(diagramRemoved(QETProject*,Diagram*)), this, SLOT(diagramWasdeletedFromProject()));
 	}
 	else
 		m_project = nullptr;
 
 		//Keep up to date this widget when the linked elements of m_element change
 	if (m_element)
-		disconnect(m_element.data(), &Element::linkedElementChanged,
-			   this, &MasterPropertiesWidget::updateUi);
+		disconnect(m_element.data(), &Element::linkedElementChanged, this, &MasterPropertiesWidget::updateUi);
 	
 	m_element = element;
-	connect(m_element.data(), &Element::linkedElementChanged,
-		this, &MasterPropertiesWidget::updateUi);
+	connect(m_element.data(), &Element::linkedElementChanged, this, &MasterPropertiesWidget::updateUi);
 
 	updateUi();
 }
 
 /**
-	@brief MasterPropertiesWidget::apply
-	If link betwen edited element and other change,
-	apply the change with a QUndoCommand (got with method associatedUndo)
-	pushed to the stack of element project.
-	Return true if link change, else false
-	@note is void no Return ???
+ * @brief MasterPropertiesWidget::apply
+ * If link betwen edited element and other change,
+ * apply the change with a QUndoCommand (got with method associatedUndo)
+ * pushed to the stack of element project.
+ * Return true if link change, else false
  */
 void MasterPropertiesWidget::apply() {
 	if (QUndoCommand *undo = associatedUndo())
@@ -175,8 +156,8 @@ void MasterPropertiesWidget::apply() {
 }
 
 /**
-	@brief MasterPropertiesWidget::reset
-	Reset curent widget, clear eveything and rebuild widget.
+ * @brief MasterPropertiesWidget::reset
+ * Reset curent widget, clear eveything and rebuild widget.
  */
 void MasterPropertiesWidget::reset()
 {
@@ -188,11 +169,11 @@ void MasterPropertiesWidget::reset()
 }
 
 /**
-	@brief MasterPropertiesWidget::associatedUndo
-	If link between the edited element and other change,
-	return a QUndoCommand with this change.
-	If no change return nullptr.
-	@return
+ * @brief MasterPropertiesWidget::associatedUndo
+ * If link between the edited element and other change,
+ * return a QUndoCommand with this change.
+ * If no change return nullptr.
+ * @return
  */
 QUndoCommand* MasterPropertiesWidget::associatedUndo() const
 {
@@ -226,10 +207,10 @@ QUndoCommand* MasterPropertiesWidget::associatedUndo() const
 }
 
 /**
-	@brief MasterPropertiesWidget::setLiveEdit
-	@param live_edit = true : live edit is enable
-	else false : live edit is disable.
-	@return always true because live edit is handled by this editor widget
+ * @brief MasterPropertiesWidget::setLiveEdit
+ * @param live_edit = true : live edit is enable
+ * else false : live edit is disable.
+ * @return always true because live edit is handled by this editor widget
  */
 bool MasterPropertiesWidget::setLiveEdit(bool live_edit)
 {
@@ -238,8 +219,8 @@ bool MasterPropertiesWidget::setLiveEdit(bool live_edit)
 }
 
 /**
-	@brief MasterPropertiesWidget::updateUi
-	Build the interface of the widget
+ * @brief MasterPropertiesWidget::updateUi
+ * Build the interface of the widget
  */
 void MasterPropertiesWidget::updateUi()
 {
@@ -264,24 +245,17 @@ void MasterPropertiesWidget::updateUi()
 		if(settings.value("genericpanel/folio", false).toBool())
 		{
 			autonum::sequentialNumbers seq;
-			QString F =autonum::AssignVariables::formulaToLabel(
-						elmt->diagram()->border_and_titleblock.folio(),
-						seq,
-						elmt->diagram(),
-						elmt);
+			QString F =autonum::AssignVariables::formulaToLabel(elmt->diagram()->border_and_titleblock.folio(), seq, elmt->diagram(), elmt);
 			qtwi->setText(1, F);
 		}
 		else
 		{
-			qtwi->setText(1, QString::number(
-					      elmt->diagram()->folioIndex()
-					      + 1));
+			qtwi->setText(1, QString::number(elmt->diagram()->folioIndex() + 1));
 		}
 		
 
 		qtwi->setText(2, elmt->diagram()->title());
-		qtwi->setText(4, elmt->diagram()->convertPosition(
-				      elmt->scenePos()).toString());
+		qtwi->setText(4, elmt->diagram()->convertPosition(elmt->scenePos()).toString());
 		items_list.append(qtwi);
 		m_qtwi_hash.insert(qtwi, elmt);
 	}
@@ -299,23 +273,16 @@ void MasterPropertiesWidget::updateUi()
 		if(settings.value("genericpanel/folio", false).toBool())
 		{
 			autonum::sequentialNumbers seq;
-			QString F =autonum::AssignVariables::formulaToLabel(
-						elmt->diagram()->border_and_titleblock.folio(),
-						seq,
-						elmt->diagram(),
-						elmt);
+			QString F =autonum::AssignVariables::formulaToLabel(elmt->diagram()->border_and_titleblock.folio(), seq, elmt->diagram(), elmt);
 			qtwi->setText(1, F);
 		}
 		else
 		{
-			qtwi->setText(1, QString::number(
-					      elmt->diagram()->folioIndex()
-					      + 1));
+			qtwi->setText(1, QString::number(elmt->diagram()->folioIndex() + 1));
 		}
 
 		qtwi->setText(2, elmt->diagram()->title());
-		qtwi->setText(3, elmt->diagram()->convertPosition(
-				      elmt->scenePos()).toString());
+		qtwi->setText(3, elmt->diagram()->convertPosition(elmt->scenePos()).toString());
 		items_list.append(qtwi);
 		m_qtwi_hash.insert(qtwi, elmt);
 	}
@@ -331,10 +298,6 @@ void MasterPropertiesWidget::updateUi()
 	}
 }
 
-/**
-	@brief MasterPropertiesWidget::headerCustomContextMenuRequested
-	@param pos
-*/
 void MasterPropertiesWidget::headerCustomContextMenuRequested(const QPoint &pos)
 {
 	m_context_menu->clear();
@@ -343,8 +306,8 @@ void MasterPropertiesWidget::headerCustomContextMenuRequested(const QPoint &pos)
 }
 
 /**
-	@brief MasterPropertiesWidget::on_link_button_clicked
-	move curent item in the free_list to linked_list
+ * @brief MasterPropertiesWidget::on_link_button_clicked
+ * move curent item in the free_list to linked_list
  */
 void MasterPropertiesWidget::on_link_button_clicked()
 {
@@ -352,8 +315,7 @@ void MasterPropertiesWidget::on_link_button_clicked()
 	QTreeWidgetItem *qtwi = ui->m_free_tree_widget->currentItem();
 	if (qtwi)
 	{
-		ui->m_free_tree_widget->takeTopLevelItem(
-					ui->m_free_tree_widget->indexOfTopLevelItem(qtwi));
+		ui->m_free_tree_widget->takeTopLevelItem(ui->m_free_tree_widget->indexOfTopLevelItem(qtwi));
 		ui->m_link_tree_widget->insertTopLevelItem(0, qtwi);
 		
 		if(m_live_edit)
@@ -362,8 +324,8 @@ void MasterPropertiesWidget::on_link_button_clicked()
 }
 
 /**
-	@brief MasterPropertiesWidget::on_unlink_button_clicked
-	move curent item in linked_list to free_list
+ * @brief MasterPropertiesWidget::on_unlink_button_clicked
+ * move curent item in linked_list to free_list
  */
 void MasterPropertiesWidget::on_unlink_button_clicked()
 {
@@ -371,8 +333,7 @@ void MasterPropertiesWidget::on_unlink_button_clicked()
 	QTreeWidgetItem *qtwi = ui->m_link_tree_widget->currentItem();
 	if(qtwi)
 	{
-		ui->m_link_tree_widget->takeTopLevelItem(
-					ui->m_link_tree_widget->indexOfTopLevelItem(qtwi));
+		ui->m_link_tree_widget->takeTopLevelItem(ui->m_link_tree_widget->indexOfTopLevelItem(qtwi));
 		ui->m_free_tree_widget->insertTopLevelItem(0, qtwi);
 
 		if(m_live_edit)
@@ -381,18 +342,17 @@ void MasterPropertiesWidget::on_unlink_button_clicked()
 }
 
 /**
-	@brief MasterPropertiesWidget::showElementFromTWI
-	Show the element corresponding to the given QTreeWidgetItem
-	@param qtwi
-	@param column
+ * @brief MasterPropertiesWidget::showElementFromTWI
+ * Show the element corresponding to the given QTreeWidgetItem
+ * @param qtwi
+ * @param column
  */
 void MasterPropertiesWidget::showElementFromTWI(QTreeWidgetItem *qtwi, int column)
 {
 	Q_UNUSED(column);
 	if (m_showed_element)
 	{
-		disconnect(m_showed_element, SIGNAL(destroyed()),
-			   this, SLOT(showedElementWasDeleted()));
+		disconnect(m_showed_element, SIGNAL(destroyed()), this, SLOT(showedElementWasDeleted()));
 		m_showed_element -> setHighlighted(false);
 	}
 	if (m_element)
@@ -401,44 +361,39 @@ void MasterPropertiesWidget::showElementFromTWI(QTreeWidgetItem *qtwi, int colum
 	m_showed_element = m_qtwi_hash[qtwi];
 	m_showed_element->diagram()->showMe();
 	m_showed_element->setHighlighted(true);
-	connect(m_showed_element, SIGNAL(destroyed()),
-		this, SLOT(showedElementWasDeleted()));
+	connect(m_showed_element, SIGNAL(destroyed()), this, SLOT(showedElementWasDeleted()));
 }
 
 /**
-	@brief MasterPropertiesWidget::showedElementWasDeleted
-	Set to nullptr the current showed element when he was deleted
+ * @brief MasterPropertiesWidget::showedElementWasDeleted
+ * Set to nullptr the current showed element when he was deleted
  */
 void MasterPropertiesWidget::showedElementWasDeleted() {
 	m_showed_element = nullptr;
 }
 
 /**
-	@brief MasterPropertiesWidget::diagramWasdeletedFromProject
-	This slot is called when a diagram is removed from the parent project
-	of edited element to update the content of this widget
+ * @brief MasterPropertiesWidget::diagramWasdeletedFromProject
+ * This slot is called when a diagram is removed from the parent project of edited element
+ * to update the content of this widget
  */
 void MasterPropertiesWidget::diagramWasdeletedFromProject()
 {
-	// We use a timer because if the removed diagram
-	// contain slave element linked to the edited element
-	// we must to wait for this elements be unlinked,
-	// else the linked list provide deleted elements.
+		//We use a timer because if the removed diagram contain slave element linked to the edited element
+		//we must to wait for this elements be unlinked, else the linked list provide deleted elements.
 	QTimer::singleShot(10, this, SLOT(updateUi()));
 }
 
 /**
-	@brief MasterPropertiesWidget::customContextMenu
-	Display a context menu
-	@param pos
-	@param i : the tree widget where the context menu was requested.
+ * @brief MasterPropertiesWidget::customContextMenu
+ * Display a context menu
+ * @param pos
+ * @param i : the tree widget where the context menu was requested.
  */
 void MasterPropertiesWidget::customContextMenu(const QPoint &pos, int i)
 {
-	// add the size of the header to display the topleft of the QMenu
-	// at the position of the mouse.
-	// See doc about QWidget::customContextMenuRequested
-	// section related to QAbstractScrollArea
+		//add the size of the header to display the topleft of the QMenu at the position of the mouse.
+		//See doc about QWidget::customContextMenuRequested section related to QAbstractScrollArea 
 	QPoint point = pos;
 	point.ry()+=ui->m_free_tree_widget->header()->height();
 	

sources/ui/masterpropertieswidget.h

@@ -35,30 +35,24 @@ namespace Ui {
 }
 
 /**
-	@brief The MasterPropertiesWidget class
-	This class is a widget for make link between a master element
-	with several slave element.
-	This class embenddedthe undo/redo command when apply new connection.
+ * @brief The MasterPropertiesWidget class
+ * This class is a widget for make link between a master element with several slave element.
+ * This class embenddedthe undo/redo command when apply new connection.
  */
+
 class MasterPropertiesWidget : public AbstractElementPropertiesEditorWidget
 {
 	Q_OBJECT
 
 	public:
-		explicit MasterPropertiesWidget(Element *elmt,
-						QWidget *parent = nullptr);
+		explicit MasterPropertiesWidget(Element *elmt, QWidget *parent = nullptr);
 		~MasterPropertiesWidget() override;
 
 		void setElement (Element *element) override;
 		void apply() override;
 		void reset() override;
 		QUndoCommand *associatedUndo () const override;
-		/**
-		 * @brief title
-		 * @return QString title
-		 */
-		QString title() const override {
-			return tr("Référence croisée (maître)");}
+		QString title() const override {return tr("Référence croisée (maître)");}
 		bool setLiveEdit(bool live_edit) override;
 
 	public slots:

sources/undocommand/rotatetextscommand.cpp

@@ -77,7 +77,6 @@ m_diagram(diagram)
 #if QT_VERSION >= 0x050900
 	else
 		setObsolete(true);
-#pragma message("@TODO remove code for QT 5.9 or later")
 #endif
 	
 }
@@ -136,7 +135,6 @@ void RotateTextsCommand::openDialog()
 #if QT_VERSION >= 0x050900
 	else
 		setObsolete(true);
-#pragma message("@TODO remove code for QT 5.9 or later")
 #endif
 }