qelectrotech-source-mirror/sources/diagramview.cpp

/*
	Copyright 2006-2026 The QElectroTech Team
	This file is part of QElectroTech.

	QElectroTech is free software: you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation, either version 2 of the License, or
	(at your option) any later version.

	QElectroTech is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
*/
#include "diagramview.h"
#include "lastusedstyle.h"
#include "qetproject.h"
#include "QPropertyUndoCommand/qpropertyundocommand.h"
#include "diagramcommands.h"
#include "diagramevent/diagrameventaddelement.h"
#include "diagramevent/diagrameventaddmacro.h"
#include "dvevent/dveventinterface.h"
#include "projectview.h"
#include "qetdiagrameditor.h"
#include "qetgraphicsitem/conductor.h"
#include "qetgraphicsitem/conductortextitem.h"
#include "qetgraphicsitem/independenttextitem.h"
#include "qeticons.h"
#include "qetpalette.h"
#include "titleblock/integrationmovetemplateshandler.h"
#include "ui/diagrampropertiesdialog.h"
#include "ui/multipastedialog.h"
#include "undocommand/changetitleblockcommand.h"
#include "utils/conductorcreator.h"
#include "undocommand/addgraphicsobjectcommand.h"
#include "diagram.h"
#include "ElementsCollection/xmlelementcollection.h"
#include "NameList/nameslist.h"
#include "elementdialog.h"
#include <QApplication>
#include <QDropEvent>
#include <QPainter>
#include <QPointer>
#include <QStyleHintReturnMask>
#include <QStyleOptionRubberBand>
#include <QtMath>

/**
	Constructeur
	@param diagram Schema a afficher ; si diagram vaut 0, un nouveau Diagram est utilise
	@param parent Le QWidget parent de cette vue de schema
*/
DiagramView::DiagramView(Diagram *diagram, QWidget *parent) :
	QGraphicsView (parent),
	m_diagram (diagram)
{
	grabGesture(Qt::PinchGesture);
	setAttribute(Qt::WA_DeleteOnClose, true);
	setInteractive(true);

	QString whatsthis = tr(
		"Ceci est la zone dans laquelle vous concevez vos schémas en y ajoutant"
		" des éléments et en posant des conducteurs entre leurs bornes. Il est"
		" également possible d'ajouter des textes indépendants.",
		"\"What's this?\" tip"
	);
	setWhatsThis(whatsthis);

	// active l'antialiasing
	setRenderHint(QPainter::Antialiasing, true);
	setRenderHint(QPainter::TextAntialiasing, true);
	setRenderHint(QPainter::SmoothPixmapTransform, true);

	setScene(m_diagram);
	m_diagram -> undoStack().setClean();
	setWindowIcon(QET::Icons::QETLogo);
	setTransformationAnchor(QGraphicsView::AnchorUnderMouse);
	setResizeAnchor(QGraphicsView::AnchorUnderMouse);
	setAlignment(Qt::AlignLeft | Qt::AlignTop);
	setSelectionMode();
	adjustSceneRect();
	updateWindowTitle();
	m_diagram->loadElmtFolioSeq();
	m_diagram->loadCndFolioSeq();

	m_paste_here = new QAction(QET::Icons::EditPaste, tr("Coller ici", "context menu action"), this);
	connect(m_paste_here, &QAction::triggered, this, &DiagramView::pasteHere);

	m_multi_paste = new QAction(QET::Icons::EditPaste, tr("Collage multiple"), this);
	connect(m_multi_paste, &QAction::triggered, [this]() {
		MultiPasteDialog d(this->m_diagram, this);
		d.exec();
	});

	// Setup the action to create a template
	m_create_template = new QAction(tr("Créer un template", "context menu action"), this);
	connect(m_create_template, &QAction::triggered, this, &DiagramView::createTemplateFromSelection);

		//setup three separators, to be use in context menu
	for(int i=0 ; i<3 ; ++i)
	{
		m_separators << new QAction(this);
		m_separators.last()->setSeparator(true);
	}

	connect(m_diagram, &Diagram::showDiagram, this, &DiagramView::showDiagram);
	connect(m_diagram, &QGraphicsScene::sceneRectChanged, this, &DiagramView::adjustSceneRect);
		/* On a dark palette this view paints the scene into an image (see
		 * paintInverted). QGraphicsView delivers scene updates straight to
		 * its viewport when nobody listens to QGraphicsScene::changed(),
		 * and in that mode the scene clears its "update everything" flag
		 * only when the items are painted straight onto the viewport,
		 * which never happens here: from the second update on, grid and
		 * background toggles and even a selection would wait for an
		 * unrelated repaint. With a receiver connected the scene sends its
		 * updates through the signal, and clears the flag before it
		 * emits. Any receiver does; this one has nothing to do. */
	connect(m_diagram, &QGraphicsScene::changed, this, [](const QList<QRectF> &) {});
	connect(&(m_diagram -> border_and_titleblock), &BorderTitleBlock::informationChanged, this, &DiagramView::updateWindowTitle);
	connect(diagram, &Diagram::findElementRequired, this, &DiagramView::findElementRequired);

	QShortcut *edit_conductor_color_shortcut = new QShortcut(QKeySequence(Qt::Key_F2), this);
	connect(edit_conductor_color_shortcut, &QShortcut::activated, [this]()
	{
		if (m_diagram->isReadOnly()) {
			return;
		}

		DiagramContent dc(m_diagram);
		auto cond_list = dc.conductors(DiagramContent::AnyConductor);
		if (cond_list.size() != 1) {
			return;
		}
		auto edited_conductor = cond_list.first();

			// store the initial properties of the provided conductor
		ConductorProperties initial_properties = edited_conductor->properties();

			// prepare a color dialog showing the initial conductor color
		QPointer<QColorDialog> color_dialog = new QColorDialog(this);
		color_dialog->setWindowTitle(tr("Choisir la nouvelle couleur de ce conducteur"));
#ifdef Q_OS_MACOS
		color_dialog -> setWindowFlags(Qt::Sheet);
#endif
		color_dialog->setCurrentColor(initial_properties.color);

			// asks the user what color he wishes to apply
		if (color_dialog->exec() == QDialog::Accepted)
		{
			QColor new_color = color_dialog -> selectedColor();
			if (new_color != initial_properties.color)
			{
					// the user chose a different color
				QVariant old_value, new_value;
				old_value.setValue(initial_properties);
				initial_properties.color = new_color;
				new_value.setValue(initial_properties);

				QPropertyUndoCommand *undo = new QPropertyUndoCommand(edited_conductor, "properties", old_value, new_value);
				undo->setText(tr("Modifier les propriétés d'un conducteur", "undo caption"));
				m_diagram->undoStack().push(undo);

					// remember it for the next conductor drawn this session,
					// the way LastUsedStyle already does for shapes (#879)
				LastUsedStyle::setConductorColor(new_color);
			}
		}
		if (color_dialog)
			delete color_dialog;
	});
}

/**
	Destructeur
*/
DiagramView::~DiagramView()
{}

/**
	Accepte ou refuse le drag'n drop en fonction du type de donnees entrant
	@param e le QDragEnterEvent correspondant au drag'n drop tente
*/
void DiagramView::dragEnterEvent(QDragEnterEvent *e) {
	if (e -> mimeData() -> hasFormat("application/x-qet-element-uri")) {
		e -> acceptProposedAction();
	} else if (e -> mimeData() -> hasFormat("application/x-qet-titleblock-uri")) {
		e -> acceptProposedAction();
	} else if (e -> mimeData() -> hasText()) {
		e -> acceptProposedAction();
	} else {
		e -> ignore();
	}
}

/**
	Accepte ou refuse le drag'n drop en fonction du type de donnees entrant
	@param e le QDragMoveEvent correspondant au drag'n drop tente
*/
void DiagramView::dragMoveEvent(QDragMoveEvent *e) {
	if (e -> mimeData() -> hasFormat("text/plain")) e -> acceptProposedAction();
	else e-> ignore();
}

/**
	Handle the drops accepted on diagram (elements and title block templates).
	@param e the QDropEvent describing the current drag'n drop
*/
void DiagramView::dropEvent(QDropEvent *e) {

	if (e -> mimeData() -> hasFormat("application/x-qet-element-uri")) {
		handleElementDrop(e);
	} else if (e -> mimeData() -> hasFormat("application/x-qet-titleblock-uri")) {
		handleTitleBlockDrop(e);
	} else if (e -> mimeData() -> hasText()) {
		handleTextDrop(e);
	}
}

/**
 * @brief DiagramView::handleElementDrop
 * Handle the drop of an element.
 * @param event the QDropEvent describing the current drag'n drop
 */
void DiagramView::handleElementDrop(QDropEvent *event)
{
	//Build an element from the text of the mime data
	ElementsLocation location(event->mimeData()->text());

	if ( !(location.isElement() && location.exist()) )
	{
		qDebug() << "DiagramView::handleElementDrop, location can't be use : " << location;
		return;
	}

	QPointF drop_pos;
	drop_pos = mapToScene(event->position().toPoint());

	if (location.path().endsWith(".qetmak")) {
		diagram()->setEventInterface(new DiagramEventAddMacro(location, diagram(), drop_pos));
	} else {
		diagram()->setEventInterface(new DiagramEventAddElement(location, diagram(), drop_pos));
	}

	//Set focus to the view to get event
	this->setFocus();
}

/**
	@brief DiagramView::handleTitleBlockDrop
	Handle the dropEvent that contain data of a titleblock
	@param e
*/
void DiagramView::handleTitleBlockDrop(QDropEvent *e) {
		// fetch the title block template location from the drop event
	TitleBlockTemplateLocation tbt_loc;
	tbt_loc.fromString(e->mimeData()->text());


	if (tbt_loc.isValid())
	{
			// fetch the current title block properties
		TitleBlockProperties titleblock_properties_before = m_diagram->border_and_titleblock.exportTitleBlock();

			// check the provided template is not already applied
		QETProject *tbt_parent_project = tbt_loc.parentProject();
		if (tbt_parent_project && tbt_parent_project == m_diagram -> project())
		{
				// same parent project and same name = same title block template
			if (tbt_loc.name() == titleblock_properties_before.template_name)
				return;
		}

			// integrate the provided template into the project if needed
		QString integrated_template_name = tbt_loc.name();
		if (mustIntegrateTitleBlockTemplate(tbt_loc))
		{
			IntegrationMoveTitleBlockTemplatesHandler *handler = new IntegrationMoveTitleBlockTemplatesHandler(this);
			//QString error_message;
			integrated_template_name = m_diagram->project()->integrateTitleBlockTemplate(tbt_loc, handler);

			if (integrated_template_name.isEmpty())
				return;
		}

			// apply the provided title block template
		if (titleblock_properties_before.template_name == integrated_template_name)
			return;

		TitleBlockProperties titleblock_properties_after = titleblock_properties_before;
		titleblock_properties_after.template_name = integrated_template_name;
		m_diagram->undoStack().push(new ChangeTitleBlockCommand(m_diagram, titleblock_properties_before, titleblock_properties_after));

		adjustSceneRect();
	}
}

/**
	@brief DiagramView::handleTextDrop
 *handle the drop of text
	@param e the QDropEvent describing the current drag'n drop
*/
void DiagramView::handleTextDrop(QDropEvent *e) {
	if (m_diagram -> isReadOnly() || (e -> mimeData() -> hasText() == false) ) return;

	IndependentTextItem *iti = new IndependentTextItem (e -> mimeData() -> text());

	if (e -> mimeData() -> hasHtml()) {
		iti -> setHtml (e -> mimeData() -> text());
	}

	m_diagram->undoStack().push(new AddGraphicsObjectCommand(
									iti, m_diagram, mapToScene(e->position().toPoint())));
}

/**
	Set the Diagram in visualisation mode
*/
void DiagramView::setVisualisationMode()
{
	setDragMode(ScrollHandDrag);
	applyReadOnly();
	setInteractive(false);
	emit(modeChanged());
}

/**
	Set the Diagram in Selection mode
*/
void DiagramView::setSelectionMode()
{
	setDragMode(RubberBandDrag);
	setInteractive(true);
	applyReadOnly();
	emit(modeChanged());
}

/**
	@brief DiagramView::zoom
	Zomm the view.
	A zoom_factor > 1 zoom in.
	A zoom_factor < 1 zoom out
	@param zoom_factor
*/
void DiagramView::zoom(const qreal zoom_factor)
{
	// clamp the resulting scale so a repeated wheel-zoom cannot drive the view
	// transform to floating-point overflow and crash the editor (issue #798)
	const qreal target = transform().m11() * zoom_factor;
	if (target < m_min_zoom || target > m_max_zoom) {
		return;
	}

	if (zoom_factor >= 1){
		scale(zoom_factor, zoom_factor);
	}
	else
	{
		QSettings settings;
		if (settings.value("diagrameditor/zoom-out-beyond-of-folio", false).toBool() ||
			(horizontalScrollBar()->maximum() || verticalScrollBar()->maximum()) )
			if (zoom_factor >= 0){
				scale(zoom_factor, zoom_factor);
			}
	}
	m_diagram->adjustSceneRect();
	adjustGridToZoom();
	adjustSceneRect();
}

/**
	Agrandit ou rectrecit le schema de facon a ce que tous les elements du
	schema soient visibles a l'ecran. S'il n'y a aucun element sur le schema,
	le zoom est reinitialise
*/
void DiagramView::zoomFit()
{
	adjustSceneRect();
	fitInView(m_diagram->sceneRect(), Qt::KeepAspectRatio);
	adjustGridToZoom();
}

/**
	Adjust zoom to fit all elements in the view, regardless of diagram borders.
*/
void DiagramView::zoomContent()
{
	fitInView(m_diagram -> itemsBoundingRect(), Qt::KeepAspectRatio);
	adjustGridToZoom();
}

/**
	Reinitialise le zoom
*/
void DiagramView::zoomReset()
{
	resetTransform();
	adjustGridToZoom();
}

/**
	Copie les elements selectionnes du schema dans le presse-papier puis les supprime
	Copies the selected elements from the diagram to the clipboard and then deletes them
*/
void DiagramView::cut()
{
	copy();
	DiagramContent cut_content(m_diagram);
	m_diagram -> clearSelection();
	m_diagram -> undoStack().push(new CutDiagramCommand(m_diagram, cut_content));
}

/**
	Copie les elements selectionnes du schema dans le presse-papier
	Copies the selected elements from the diagram to the clipboard
*/
void DiagramView::copy()
{
	QClipboard *clipboard = QApplication::clipboard();
	QString content_clipboard = m_diagram -> toXml(false, true).toString(4);
	if (clipboard -> supportsSelection()) clipboard -> setText(content_clipboard, QClipboard::Selection);
	clipboard -> setText(content_clipboard);
}

/**
	@brief DiagramView::paste
	Import the element stored in the clipboard to the diagram.
	@param pos : top left corner of the bounding rect of imported elements
	@param clipboard_mode
*/
void DiagramView::paste(const QPointF &pos, QClipboard::Mode clipboard_mode) {
	if (!isInteractive() || m_diagram -> isReadOnly()) return;

	QString text_clipboard = QApplication::clipboard() -> text(clipboard_mode);
	if ((text_clipboard).isEmpty()) return;

	QDomDocument document_xml;
	if (!document_xml.setContent(text_clipboard)) return;

	DiagramContent content_pasted;
	m_diagram->fromXml(document_xml, pos, false, &content_pasted);

		//If something was really added to diagram, we create an undo object.
	if (content_pasted.count())
	{
		m_diagram -> clearSelection();
		m_diagram -> undoStack().push(new PasteDiagramCommand(m_diagram, content_pasted));
		adjustSceneRect();
	}
}

/**
	Colle le contenu du presse-papier sur le schema a la position de la souris
	Pastes the contents of the clipboard into the diagram at the mouse position.
*/
void DiagramView::pasteHere()
{
	paste(mapToScene(m_paste_here_pos));
}

/**
	Manage the events press click :
	 *  click to add an independent text field
*/
void DiagramView::mousePressEvent(QMouseEvent *e)
{
	e->ignore();

	if (m_fresh_focus_in)
	{
		switchToVisualisationModeIfNeeded(e);
		m_fresh_focus_in = false;
	}

	if (m_event_interface && m_event_interface->mousePressEvent(e)) return;

		//Start drag view when hold the middle button
	if (e->button() == Qt::MiddleButton)
	{
		m_drag_last_pos = e->pos();
		viewport()->setCursor(Qt::ClosedHandCursor);
		e->accept();
		return;
	}

		//There is a good luck that user want to do a free selection
		//In this case we temporally disable the dragmode because if the QGraphicsScene don't accept the event,
		//and the drag mode is set to rubberbanddrag, the QGraphicsView start rubber band drag, and accept the event.
	if (e->button() == Qt::LeftButton &&
		e->modifiers() == Qt::CTRL)
	{
		QGraphicsView::DragMode dm = dragMode();
		setDragMode(QGraphicsView::NoDrag);
		QGraphicsView::mousePressEvent(e);
		setDragMode(dm);
	} else {
		QGraphicsView::mousePressEvent(e);
	}

	if (e->isAccepted()) {
		return;
	}

	if (e->button() == Qt::LeftButton &&
			 e->modifiers() == Qt::CTRL)
	{
		m_free_rubberbanding = true;
		m_free_rubberband = QPolygon();
		e->accept();
		return;
	}

	if (!e->isAccepted()) {
		QGraphicsView::mousePressEvent(e);
	}
}

/**
	@brief DiagramView::mouseMoveEvent
	Manage the event move mouse
*/
void DiagramView::mouseMoveEvent(QMouseEvent *e)
{
	setToolTip(tr("X: %1 Y: %2").arg(e->pos().x()).arg(e->pos().y()));
	if (m_event_interface && m_event_interface->mouseMoveEvent(e)) return;

		// Drag the view
	if (e->buttons() == Qt::MiddleButton)
	{
		QScrollBar *h = horizontalScrollBar();
		QScrollBar *v = verticalScrollBar();
		QPointF pos = m_drag_last_pos - e -> pos();
		m_drag_last_pos = e -> pos();
		h -> setValue(h -> value() + pos.x());
		v -> setValue(v -> value() + pos.y());
		adjustSceneRect();
	}
	else if (m_free_rubberbanding)
	{
			//Update old free rubberband
		if (viewportUpdateMode() != QGraphicsView::NoViewportUpdate && !m_free_rubberband.isEmpty())
		{
			if (viewportUpdateMode() != QGraphicsView::FullViewportUpdate) {
				viewport()->update(m_free_rubberband.boundingRect().toRect().adjusted(-10,-10,10,10));
			}
			else {
				update();
			}
		}

			//Stop polygon rubberbanding if user has let go of all buttons (even
			//if we didn't get the release events)
		if (!e->buttons()) {
			m_free_rubberbanding = false;
			m_free_rubberband = QPolygon();
			return;
		}
		m_free_rubberband.append(mapToScene(e->pos()));
		emit freeRubberBandChanged(m_free_rubberband);

		if (viewportUpdateMode() != QGraphicsView::NoViewportUpdate)
		{
			if (viewportUpdateMode() != QGraphicsView::FullViewportUpdate) {
				viewport()->update(mapFromScene(m_free_rubberband.boundingRect().adjusted(-10,-10,10,10)));
			}
			else {
				update();
			}
		}

			//Set the new selection area
		QPainterPath selection_area;
		selection_area.addPolygon(m_free_rubberband);
		m_diagram->setSelectionArea(selection_area);
	}

	else QGraphicsView::mouseMoveEvent(e);
}

/**
	@brief DiagramView::mouseReleaseEvent
	Manage event release click mouse
*/
void DiagramView::mouseReleaseEvent(QMouseEvent *e)
{
	if (m_event_interface && m_event_interface->mouseReleaseEvent(e)) return;

		// Stop drag view
	if (e->button() == Qt::MiddleButton)
	{
		viewport()->setCursor(Qt::ArrowCursor);
	}
	else if (m_free_rubberbanding && !e->buttons())
	{
		if (viewportUpdateMode() != QGraphicsView::NoViewportUpdate)
		{
			if (viewportUpdateMode() != QGraphicsView::FullViewportUpdate)
			{
				QRectF r(mapFromScene(m_free_rubberband).boundingRect());
				r.adjust(-10, -10, 10, 10);
				viewport()->update(r.toRect());
			}
			else
			{
				update();
			}
		}

		if (m_free_rubberband.count() > 3)
		{
				//Popup a menu with an action to create conductors between
				//all selected terminals.
			QAction *act = new QAction(tr("Connecter les bornes sélectionnées"), this);
			QPolygonF polygon_ = m_free_rubberband;
			connect(act, &QAction::triggered, [this, polygon_]()
			{
				ConductorCreator::create(m_diagram, polygon_);
				diagram()->clearSelection();
			});
			QMenu *menu = new QMenu(this);
			menu->addAction(act);

			menu->popup(e->globalPosition().toPoint());
		}

		m_free_rubberbanding = false;
		m_free_rubberband = QPolygon();
		emit freeRubberBandChanged(m_free_rubberband);
		e->accept();
	}
	else
		QGraphicsView::mouseReleaseEvent(e);
}

/**
	@brief DiagramView::gestures
	@return
*/
bool DiagramView::gestures() const
{
	QSettings settings;
	return(settings.value("diagramview/gestures", false).toBool());
}

/**
	@brief DiagramView::wheelEvent
	Manage wheel event of mouse
	@param event QWheelEvent
*/
void DiagramView::wheelEvent(QWheelEvent *event)
{
	if (m_event_interface && m_event_interface->wheelEvent(event)) return;

		//Zoom and scrolling
	QPoint angle = event->angleDelta();

	if (gestures()) //When gesture mode is enable, we suppose the wheel event are made from a trackpad.
	{
		if (event->modifiers() == Qt::ControlModifier) //zoom
		{
			qreal value = angle.y();
			zoom(1 + value/1000);
		}
		else //scroll
		{
			horizontalScrollBar()->setValue(horizontalScrollBar()->value() - angle.x());
			verticalScrollBar()->setValue(verticalScrollBar()->value() - angle.y());
		}
	}
	else if (event->modifiers() == Qt::NoModifier) //Else we suppose the wheel event are made from a mouse.
	{
		qreal value = angle.y();
		zoom(1 + value/1000);
	}
	else
		QGraphicsView::wheelEvent(event);
}

/**
	@brief DiagramView::gestureEvent
	Use the pinch of the trackpad for zoom
	@param event
	@return
*/
bool DiagramView::gestureEvent(QGestureEvent *event)
{
	if (QGesture *gesture = event->gesture(Qt::PinchGesture))
	{
		QPinchGesture *pinch = static_cast<QPinchGesture *>(gesture);
		if (pinch->changeFlags() & QPinchGesture::ScaleFactorChanged)
		{
			qreal value = gesture->property("scaleFactor").toReal();
			value > 1 ? zoom(1.02) : zoom(0.98);
		}
	}
	return true;
}



/**
	Handles "Focus in" events. Reimplemented here to store the fact the focus
	was freshly acquired again using the mouse. This information is later used
	in DiagramView::mousePressEvent().
*/
void DiagramView::focusInEvent(QFocusEvent *e) {
	if (e -> reason() == Qt::MouseFocusReason) {
		m_fresh_focus_in = true;
	}
}

/**
	@brief DiagramView::focusNextPrevChild
	By default, QWidget intercepts Tab/Shift+Tab to move keyboard focus to
	the next/previous widget before a key press event is ever generated,
	which would silently swallow the diagram's Tab-based item-selection
	cycling (see Diagram::event()). Returning false here disables that
	automatic focus-chain traversal for this view, so Tab/Shift+Tab reach
	keyPressEvent() (and from there, the scene) as ordinary key presses
	instead.
	@return always false
*/
bool DiagramView::focusNextPrevChild(bool next)
{
		//Escape asked for focus to leave; allow exactly this one traversal.
	if (m_releasing_focus) {
		m_releasing_focus = false;
		return QGraphicsView::focusNextPrevChild(next);
	}
	return false;
}

/**
	@brief DiagramView::keyPressEvent
	Handles "key press" events. Reimplemented here to switch to visualisation
	mode if needed.
	@param e
*/
void DiagramView::keyPressEvent(QKeyEvent *e)
{
	if (m_event_interface && m_event_interface->keyPressEvent(e))
		return;

	ProjectView *current_project = this->diagramEditor()->currentProjectView();
	DiagramContent dc(m_diagram);
	switch(e -> key())
	{
		case Qt::Key_Escape:
				//Tab cycles the folio's items rather than moving focus (see
				//focusNextPrevChild above), so without this there would be no
				//way off the canvas for someone working without a mouse.
				//Escape steps back out: first it drops the selection, then it
				//hands focus to the next widget.
			if (m_diagram && m_diagram->eventInterfaceIsRunning()) {
				QGraphicsView::keyPressEvent(e);  // let the active tool see it
				return;
			}
			if (m_diagram && !m_diagram->selectedItems().isEmpty()) {
				m_diagram->clearSelection();
			} else {
				m_releasing_focus = true;
				focusNextChild();
			}
			return;
		case Qt::Key_PageUp:
			current_project->changeTabUp();
			return;
		case Qt::Key_PageDown:
			current_project->changeTabDown();
			return;
		case Qt::Key_Home:
			if (dc.selectedTexts().isEmpty()) {
				if (
					qgraphicsitem_cast<IndependentTextItem *>(m_diagram->focusItem()) ||
					qgraphicsitem_cast<ConductorTextItem *>(m_diagram->focusItem()) ||
					qgraphicsitem_cast<DiagramTextItem *>(m_diagram->focusItem())
					)
					break;
				current_project->changeFirstTab();
				return;
			}
			else break;
		case Qt::Key_End:
			if (dc.selectedTexts().isEmpty()) {
				if (
					qgraphicsitem_cast<IndependentTextItem *>(m_diagram->focusItem()) ||
					qgraphicsitem_cast<ConductorTextItem *>(m_diagram->focusItem()) ||
					qgraphicsitem_cast<DiagramTextItem *>(m_diagram->focusItem())
					)
					break;
				current_project->changeLastTab();
				return;
			}
			else break;
		case Qt::Key_ZoomOut:
			zoom(0.85);
			return;
		case Qt::Key_ZoomIn:
			zoom(1.15);
			return;
		case Qt::Key_Minus: {
			if (e->modifiers() & Qt::ControlModifier)
				zoom(0.85);
		}
			break;
		case Qt::Key_Plus: {
			if (e->modifiers() & Qt::ControlModifier)
				zoom(1.15);
		}
			break;
		case Qt::Key_Up: {
			if(!dc.items(DiagramContent::All).isEmpty() && !dc.hasTextEditing())
				scrollOnMovement(e);
		}
			break;
		case Qt::Key_Down: {
			if(!dc.items(DiagramContent::All).isEmpty() && !dc.hasTextEditing())
				scrollOnMovement(e);
		}
			break;
		case Qt::Key_Left: {
			if(!dc.items(DiagramContent::All).isEmpty() && !dc.hasTextEditing())
				scrollOnMovement(e);
		}
			break;
		case Qt::Key_Right: {
			if(!dc.items(DiagramContent::All).isEmpty() && !dc.hasTextEditing())
				scrollOnMovement(e);
		}
			break;
	}

	switchToVisualisationModeIfNeeded(e);
	QGraphicsView::keyPressEvent(e);
}

/**
	Handles "key release" events. Reimplemented here to switch to selection
	mode if needed.
*/
void DiagramView::keyReleaseEvent(QKeyEvent *e) {
	if (m_event_interface && m_event_interface->KeyReleaseEvent(e)) return;

	switchToSelectionModeIfNeeded(e);
	QGraphicsView::keyReleaseEvent(e);
}

/**
	Handles element movement when editor is zoomed in and scrolls vertical
	and horizontal bar. If element is moved to the right side of the editor
	or below the editor SceneRect is expanded
*/
void DiagramView::scrollOnMovement(QKeyEvent *e)
{
			const QList<QGraphicsItem *> selected_elmts = DiagramContent(m_diagram).items(DiagramContent::All);
			QRectF viewed_scene = viewedSceneRect();
			for (QGraphicsItem *qgi : selected_elmts)
			{
				if (qgraphicsitem_cast<Conductor *>(qgi))
					continue;
				if (qgi->parentItem() && qgi->parentItem()->isSelected())
					continue;

				qreal x = qgi->pos().x();
				qreal y = qgi->pos().y();
				qreal bottom = viewed_scene.bottom();
				qreal top    = viewed_scene.top();
				qreal left   = viewed_scene.left();
				qreal right  = viewed_scene.right();
				qreal elmt_top    = y + qgi->boundingRect().top();
				qreal elmt_bottom = y + qgi->boundingRect().bottom();
				qreal elmt_right  = x + qgi->boundingRect().right();
				qreal elmt_left   = x + qgi->boundingRect().left();
				if (qgi->parentItem()) {
					elmt_top    += qgi->parentItem()->y();
					elmt_bottom += qgi->parentItem()->y();
					elmt_right  += qgi->parentItem()->x();
					elmt_left   += qgi->parentItem()->x();
				}

				bool elmt_right_of_left_margin = elmt_left>=left;
				bool elmt_left_of_right_margin = elmt_right<=right;
				bool elmt_below_top_margin     = elmt_top>=top;
				bool elmt_above_bottom_margin  = elmt_bottom<=bottom;

				if (!(elmt_right_of_left_margin && elmt_left_of_right_margin) ||
				    !(elmt_below_top_margin     && elmt_above_bottom_margin )  )
				{
						QScrollBar *h = horizontalScrollBar();
						QScrollBar *v = verticalScrollBar();
						int h_increment=0;
						int v_increment=0;
						if (e->key()==Qt::Key_Up && elmt_above_bottom_margin) {
							v_increment = 2*qgi->boundingRect().top();
							if (v_increment == 0) v_increment = -2*qgi->boundingRect().height();
						}
						else if(e->key()==Qt::Key_Down && elmt_below_top_margin) {
							v_increment = 2*qgi->boundingRect().bottom();
							if (v_increment == 0) v_increment = -2*qgi->boundingRect().height();
						}
						else if (e->key()==Qt::Key_Left && elmt_left_of_right_margin) {
							h_increment = 2*qgi->boundingRect().left();
							if (h_increment == 0) h_increment = -2*qgi->boundingRect().width();
						}
						else if (e->key()==Qt::Key_Right && elmt_right_of_left_margin) {
							h_increment = 2*qgi->boundingRect().right();
							if (h_increment == 0) h_increment = -2*qgi->boundingRect().width();
						}
						if (((elmt_right  >= m_diagram->sceneRect().right() -  qgi->boundingRect().right())  ||
							(elmt_bottom >= m_diagram->sceneRect().bottom() - qgi->boundingRect().bottom())) &&
							(e->key()==Qt::Key_Right || e->key()==Qt::Key_Down)){
							m_diagram->adjustSceneRect();
						}
						h -> setValue(h -> value() + h_increment);
						v -> setValue(v -> value() + v_increment);
				}
			}
}


/**
	@return le titre de cette vue ; cela correspond au titre du schema
	visualise precede de la mention "Schema". Si le titre du schema est vide,
	la mention "Schema sans titre" est utilisee
	@see Diagram::title()
*/
QString DiagramView::title() const
{
	QString view_title;
	QString diagram_title(m_diagram -> title());
	if (diagram_title.isEmpty()) {
		view_title = tr("Sans titre", "what to display for untitled diagrams");
	} else {
		view_title = diagram_title;
	}
	return(view_title);
}

/**
	@brief DiagramView::editDiagramProperties
	Edit the properties of the viewed digram
*/
void DiagramView::editDiagramProperties()
{
	DiagramPropertiesDialog::diagramPropertiesDialog(m_diagram, diagramEditor());
}

/**
	@brief DiagramView::adjustSceneRect
	Calcul and set the area of the scene visualized by this view
*/
void DiagramView::adjustSceneRect()
{
	QRectF scene_rect = m_diagram->sceneRect();
	scene_rect.adjust(-Diagram::margin, -Diagram::margin, Diagram::margin, Diagram::margin);

	QSettings settings;
	if (settings.value("diagrameditor/zoom-out-beyond-of-folio", false).toBool())
	{
			//When zoom out beyond of folio is active,
			//we always adjust the scene rect to be 1/3 bigger than the wiewport
		QRectF vpbr = mapToScene(viewport()->rect()).boundingRect();
		vpbr.adjust(0, 0, vpbr.width()/3, vpbr.height()/3);
		scene_rect = scene_rect.united(vpbr);
	}
	setSceneRect(scene_rect);
}

/**
	Met a jour le titre du widget
*/
void DiagramView::updateWindowTitle()
{
	emit(titleChanged(this, title()));
}

/**
	Enables or disables the drawing grid according to the amount of pixels display
*/
void DiagramView::adjustGridToZoom()
{
	QRectF viewed_scene = viewedSceneRect();
	if (diagramEditor()->drawGrid())
		m_diagram->setDisplayGrid(viewed_scene.width() < 2000 || viewed_scene.height() < 2000);
	else
		m_diagram->setDisplayGrid(false);
}

/**
	@return le rectangle du schema (classe Diagram) visualise par ce DiagramView
*/
QRectF DiagramView::viewedSceneRect() const
{
	// recupere la taille du widget viewport
	QSize viewport_size = viewport() -> size();

	// recupere la transformation viewport -> scene
	QTransform view_to_scene   = viewportTransform().inverted();

	// mappe le coin superieur gauche et le coin inferieur droit de la viewport sur la scene
	QPointF scene_left_top     = view_to_scene.map(QPointF(0.0, 0.0));
	QPointF scene_right_bottom = view_to_scene.map(QPointF(viewport_size.width(), viewport_size.height()));

	// en deduit le rectangle visualise par la scene
	return(QRectF(scene_left_top, scene_right_bottom));
}

/**
	@param tbt_loc A title block template location
	@return true if the title block template needs to be integrated in the
	parent project before being applied to the current diagram, or false if it
	can be directly applied
*/
bool DiagramView::mustIntegrateTitleBlockTemplate(const TitleBlockTemplateLocation &tbt_loc) const
{
	// unlike elements, the integration of title block templates is mandatory, so we simply check whether the parent project of the template is also the parent project of the diagram
	QETProject *tbt_parent_project = tbt_loc.parentProject();
	if (!tbt_parent_project) return(true);

	return(tbt_parent_project != m_diagram -> project());
}

/**
	Fait en sorte que le schema ne soit editable que s'il n'est pas en lecture
	seule
*/
void DiagramView::applyReadOnly()
{
	if (!m_diagram) return;

	bool is_writable = !m_diagram -> isReadOnly();
	setInteractive(is_writable);
	setAcceptDrops(is_writable);
}

/**
	Reinitialise le profil des conducteurs selectionnes
*/
void DiagramView::resetConductors()
{
	if (m_diagram -> isReadOnly()) return;
	// recupere les conducteurs selectionnes
	QSet<Conductor *> selected_conductors = m_diagram -> selectedConductors();

	// repere les conducteurs modifies (= profil non nul)
	QHash<Conductor *, ConductorProfilesGroup> conductors_and_profiles;
	foreach(Conductor *conductor, selected_conductors) {
		ConductorProfilesGroup profile = conductor -> profiles();
		if (
			!profile[Qt::TopLeftCorner].isNull() ||\
			!profile[Qt::TopRightCorner].isNull() ||\
			!profile[Qt::BottomLeftCorner].isNull() ||\
			!profile[Qt::BottomRightCorner].isNull()
		) {
			conductors_and_profiles.insert(conductor, profile);
		}
	}

	if (conductors_and_profiles.isEmpty()) return;
	m_diagram -> undoStack().push(new ResetConductorCommand(conductors_and_profiles));
}

/**
	@brief DiagramView::event
	Manage the event on this diagram view.
	-At first activation (QEvent::WindowActivate or QEvent::Show) we zoomFit.
	-Convert event interpreted to mouse event to gesture event if needed.
	-send Shortcut to view (by default send to QMenu /QAction)
	Gere les evenements de la DiagramView
	@param e : the event.
	@return
*/
bool DiagramView::event(QEvent *e) {
	if (Q_UNLIKELY(m_first_activation)) {
		if (e -> type() == QEvent::Show) {
			zoomFit();
			m_first_activation = false;
		}
	}
	// By default touch events are converted to mouse events. So
	// after this event we will get a mouse event also but we want
	// to handle touch events as gestures only. So we need this safeguard
	// to block mouse events that are actually generated from touch.
	if (e->type() == QEvent::Gesture)
		return gestureEvent(static_cast<QGestureEvent *>(e));

		// fait en sorte que les raccourcis clavier arrivent prioritairement sur la
		// vue plutot que de remonter vers les QMenu / QAction
	if (
		e -> type() == QEvent::ShortcutOverride &&
		selectedItemHasFocus()
	) {
		e -> accept();
		return(true);
	}
	return(QGraphicsView::event(e));
}

/**
	@brief DiagramView::canvasIsInverted
	@return true when the folio must be drawn with its lightness inverted,
	i.e. when the application palette is dark. The document keeps its own
	colors; only the screen rendering changes, so printing and exporting
	stay black on white.
*/
bool DiagramView::canvasIsInverted() const
{
	return QET::Palette::isDark(qApp->palette());
}

/**
	@brief DiagramView::paintInverted
	Render \a area of the viewport into an off-screen image, invert the
	lightness of that image and blit it to the viewport. Inverting the
	finished rendering turns the white sheet black and the black ink white
	in one pass, and keeps the hue of colored conductors and elements.
	@param area the part of the viewport to repaint, in viewport coordinates
*/
void DiagramView::paintInverted(const QRect &area)
{
	const QRect rect = area.intersected(viewport()->rect());
	if (rect.isEmpty())
		return;

	const qreal ratio = viewport()->devicePixelRatioF();
	QImage buffer(qCeil(rect.width() * ratio), qCeil(rect.height() * ratio),
				  QImage::Format_RGB32);
	buffer.setDevicePixelRatio(ratio);

	QPainter buffer_painter(&buffer);
	buffer_painter.setRenderHints(renderHints());
	m_diagram->setInvertedLightness(true);
	render(&buffer_painter, QRectF(QPointF(0, 0), QSizeF(rect.size())),
		   rect, Qt::IgnoreAspectRatio);
	m_diagram->setInvertedLightness(false);
	buffer_painter.end();

	QET::Palette::invertLightness(buffer, palette().color(QPalette::Base),
	                              palette().color(QPalette::Text));

	QPainter painter(viewport());
	painter.drawImage(rect.topLeft(), buffer);
	drawRubberBand(painter);
}

/**
	@brief DiagramView::drawRubberBand
	Draw the selection rubber band the way QGraphicsView::paintEvent does.
	Rendering the view into an off-screen image skips it, so it is drawn
	here instead, after the inversion, and keeps the palette colors.
	@param painter a painter on the viewport
*/
void DiagramView::drawRubberBand(QPainter &painter)
{
	const QRect band = rubberBandRect();
	if (band.isNull())
		return;

	QStyleOptionRubberBand option;
	option.initFrom(viewport());
	option.rect = band;
	option.shape = QRubberBand::Rectangle;

	QStyleHintReturnMask mask;
	if (viewport()->style()->styleHint(QStyle::SH_RubberBand_Mask, &option,
									   viewport(), &mask))
		painter.setClipRegion(mask.region, Qt::IntersectClip);
	viewport()->style()->drawControl(QStyle::CE_RubberBand, &option,
									 &painter, viewport());
}

/**
	@brief DiagramView::paintEvent
	Reimplemented from QGraphicsView
	@param event
*/
void DiagramView::paintEvent(QPaintEvent *event)
{
	if (canvasIsInverted())
		paintInverted(event->rect());
	else
		QGraphicsView::paintEvent(event);

	if (m_free_rubberbanding && m_free_rubberband.count() >= 3)
	{
		QPainter painter(viewport());
		painter.setRenderHint(QPainter::Antialiasing);
		QPen pen(Qt::darkGreen);
		pen.setWidth(1);
		painter.setPen(pen);
		QColor color(Qt::darkGreen);
		color.setAlpha(50);
		QBrush brush(color);
		painter.setBrush(brush);
		painter.drawPolygon(mapFromScene(m_free_rubberband));
	}
}

/**
	Switch to visualisation mode if the user is pressing Ctrl and Shift.
	@return true if the view was switched to visualisation mode, false
	otherwise.
*/
bool DiagramView::switchToVisualisationModeIfNeeded(QInputEvent *e) {
	if (isCtrlShifting(e) && !selectedItemHasFocus()) {
		if (dragMode() != QGraphicsView::ScrollHandDrag) {
			setVisualisationMode();
			return(true);
		}
	}
	return(false);
}

/**
	Switch back to selection mode if the user is not pressing Ctrl and Shift.
	@return true if the view was switched to selection mode, false
	otherwise.
*/
bool DiagramView::switchToSelectionModeIfNeeded(QInputEvent *e) {
	if (!selectedItemHasFocus() && !isCtrlShifting(e)) {
		setSelectionMode();
		return(true);
	}
	return(false);
}

/**
	@return true if the user is pressing Ctrl and Shift simultaneously.
*/
bool DiagramView::isCtrlShifting(QInputEvent *e) {
	bool result = false;
	// note: QInputEvent::modifiers and QKeyEvent::modifiers() do not return the
	// same values, hence the casts
	if (e -> type() == QEvent::KeyPress || e -> type() == QEvent::KeyRelease) {
		if (QKeyEvent *ke = static_cast<QKeyEvent *>(e)) {
			result = (ke -> modifiers() == (Qt::ControlModifier | Qt::ShiftModifier));
		}
	} else if (e -> type() >= QEvent::MouseButtonPress && e -> type() <= QEvent::MouseMove) {
		if (QMouseEvent *me = static_cast<QMouseEvent *>(e)) {
			result = (me -> modifiers() == (Qt::ControlModifier | Qt::ShiftModifier));
		}
	}
	return(result);
}

/**
	@return true if there is a selected item and that item has the focus.
*/
bool DiagramView::selectedItemHasFocus()
{
	return(
		m_diagram -> hasFocus() &&
		m_diagram -> focusItem() &&
		m_diagram -> focusItem() -> isSelected()
	);
}

/**
	@brief DiagramView::editSelection
	Edit the selected item if he can be edited and if only  one item is selected
*/
void DiagramView::editSelection()
{
	if (m_diagram -> isReadOnly() || m_diagram -> selectedItems().size() != 1 ) return;

	QGraphicsItem *item = m_diagram->selectedItems().first();

		//We use dynamic_cast instead of qgraphicsitem_cast for QetGraphicsItem
		//because they haven't got their own type().
		//Use qgraphicsitem_cast will have weird behavior for this class.
	if (IndependentTextItem *iti = qgraphicsitem_cast<IndependentTextItem *>(item))
		iti -> edit();
	else if (QetGraphicsItem *qgi = dynamic_cast<QetGraphicsItem *> (item))
		qgi -> editProperty();
	else if (Conductor *c = qgraphicsitem_cast<Conductor *>(item))
		c -> editProperty();
}

/**
	@brief DiagramView::setEventInterface
	Set an event interface to diagram view.
	If diagram view already have an event interface, he delete it before.
	Diagram view take ownership of event interface and delete it when event interface is finish
*/
void DiagramView::setEventInterface(DVEventInterface *event_interface)
{
	if (m_event_interface) delete m_event_interface;
	m_event_interface = event_interface;
	connect(m_event_interface, &DVEventInterface::finish, this, [=](){delete this->m_event_interface; this->m_event_interface = nullptr;}, Qt::QueuedConnection);
}

/**
	@brief DiagramView::contextMenuActions
	@return a list of actions currently available for a context menu.

*/
QList<QAction *> DiagramView::contextMenuActions() const
{
	QList<QAction *> list;
	if (QETDiagramEditor *qde = diagramEditor())
	{
		if (m_diagram->selectedItems().isEmpty())
		{
			list << m_paste_here;
			list << m_separators.at(0);
			list << qde->m_edit_diagram_properties;
			list << qde->m_row_column_actions_group.actions();
		}
		else
		{
			list << qde->m_cut;
			list << qde->m_copy;
			list << m_multi_paste;
			list << m_separators.at(0);
			list << m_create_template; // Add the create template action
			list << qde->m_conductor_reset;
			list << m_separators.at(1);
			list << qde->m_selection_actions_group.actions();
			list << m_separators.at(2);
			list << qde->m_depth_action_group->actions();
		}

			//Remove from the context menu the actions which are disabled.
		const QList<QAction *> actions = list;
		for(QAction *action : actions)
		{
			if (!action->isEnabled()) {
				list.removeAll(action);
			}
		}
	}

	return list;
}

/**
	@brief DiagramView::contextMenuEvent
	@param e
*/
void DiagramView::contextMenuEvent(QContextMenuEvent *e)
{
	QPoint menu_pos = e->pos();
	QPoint menu_global_pos = e->globalPos();

		//A context menu raised from the keyboard (the Menu key, or
		//Shift+F10) carries no useful position: Qt does not aim it at the
		//selection. Two things then went wrong. QGraphicsView handed the
		//event to whichever item held focus, which answered with its own
		//generic Undo/Cut/Copy menu and accepted it, so the folio's real
		//menu was never built; and had it got past that, itemAt() below
		//would have looked up an unrelated point.
		//
		//So a keyboard-raised menu is built here directly rather than being
		//offered to the items first, and aimed at the selection when there
		//is one. The keyboard then gets the folio's menu, which is what a
		//right-click gets.
	const bool from_keyboard = e->reason() == QContextMenuEvent::Keyboard;

	if (from_keyboard)
	{
			//Aim at the selection when there is one, so the menu appears
			//beside what it acts on. With nothing selected there is nothing
			//to aim at, so use the middle of the view -- the folio's own
			//menu is still the right menu to show.
		const auto selection = m_diagram->selectedItems();
		if (!selection.isEmpty())
		{
			QRectF selection_rect;
			for (auto *item : selection) {
				selection_rect |= item->sceneBoundingRect();
			}
			menu_pos = mapFromScene(selection_rect.center());
		}
		else
		{
			menu_pos = viewport()->rect().center();
		}
		menu_global_pos = viewport()->mapToGlobal(menu_pos);
	}
	else
	{
		QGraphicsView::contextMenuEvent(e);
		if(e->isAccepted())
		return;

		if (auto qgi = m_diagram->itemAt(mapToScene(menu_pos), transform()))
		{
			if (!qgi->isSelected()) {
				m_diagram->clearSelection();
			}

				// At this step qgi can be deleted for example if qgi is a QetGraphicsHandlerItem.
				// When we call clearSelection the parent item of the handler
				// is deselected and so delete all handlers, in this case,
				// qgi become a dangling pointer.
				// we need to call again itemAt.
			if (auto item_ = m_diagram->itemAt(mapToScene(menu_pos), transform())) {
				item_->setSelected(true);
			}
		}
	}

	if (m_diagram->selectedItems().isEmpty())
	{
		m_paste_here_pos = menu_pos;
		m_paste_here->setEnabled(Diagram::clipboardMayContainDiagram());
	}

	QList <QAction *> list = contextMenuActions();
	if(!list.isEmpty())
	{
		QMenu *context_menu = new QMenu(this);
		context_menu->addActions(list);
		context_menu->popup(menu_global_pos);
		e->accept();
	}
}

/**
 * @brief DiagramView::createTemplateFromSelection
 * Triggered from the context menu to create a new template (macro) from the current selection.
 */
void DiagramView::createTemplateFromSelection()
{
	QList<QGraphicsItem *> selected_elements = m_diagram->selectedItems();

	if (selected_elements.isEmpty()) {
		return;
	}

	qDebug() << "Ready to create a template from" << selected_elements.size() << "elements!";

	// Open the dialog to let the user select where to save the .qetmak file
	ElementsLocation template_location = ElementDialog::getSaveTemplateLocation(this);

	// Check if the user clicked 'Cancel' or closed the window
	if (template_location.isNull()) {
		qDebug() << "User canceled template creation.";
		return;
	}

	qDebug() << "Will save template to:" << template_location.path();

	QDomDocument content_xml = m_diagram->toXml(false, true);

	QDomDocument macro_doc;
	QDomElement root = macro_doc.createElement("qet_macro");
	macro_doc.appendChild(root);

	QDomElement collection_node = macro_doc.createElement("collection");
	root.appendChild(collection_node);

	QSet<QString> processed_types;

	QDomNodeList element_nodes = content_xml.elementsByTagName("element");
	for (int i = 0; i < element_nodes.count(); ++i) {
		QDomElement elmt_node = element_nodes.at(i).toElement();
		QString old_type = elmt_node.attribute("type");

		if (old_type.isEmpty()) continue;

		ElementsLocation loc(old_type, m_diagram->project());

		QString clean_path = loc.collectionPath(false);

		QString new_type = "macro://" + clean_path;
		elmt_node.setAttribute("type", new_type);

		if (!processed_types.contains(clean_path)) {
			processed_types.insert(clean_path);

			QDomElement definition_node = loc.xml();

			if (!definition_node.isNull()) {
				QDomElement collection_elmt = macro_doc.createElement("element");
				collection_elmt.setAttribute("path", clean_path);

				QDomNode imported_def = macro_doc.importNode(definition_node, true);
				collection_elmt.appendChild(imported_def);

				collection_node.appendChild(collection_elmt);
			} else {
				qDebug() << "Warnung: Konnte XML-Definition für" << old_type << "nicht laden.";
			}
		}
	}

	QDomElement content_container = macro_doc.createElement("diagram_content");
	root.appendChild(content_container);

	QDomNode imported_node = macro_doc.importNode(content_xml.documentElement(), true);
	content_container.appendChild(imported_node);

	QString full_path = template_location.fileSystemPath();

	QDir().mkpath(QFileInfo(full_path).absolutePath());

	QFile file(full_path);
	if (file.open(QIODevice::WriteOnly | QIODevice::Text)) {
		QTextStream out(&file);
		out << macro_doc.toString(4);
		file.close();
		qDebug() << "Template successfully saved to:" << full_path;

		QMessageBox::information(this, tr("Modèle enregistré"),
								 tr("Le modèle a été enregistré avec succès sous :\n%1").arg(full_path));
	} else {
		qDebug() << "Error: Could not open file for writing:" << full_path;
		QMessageBox::critical(this, tr("Erreur"), tr("Le fichier n'a pas pu être écrit."));
	}
}

/**
	@return l'editeur de schemas parent ou 0
*/
QETDiagramEditor *DiagramView::diagramEditor() const
{
	// remonte la hierarchie des widgets
	QWidget *w = const_cast<DiagramView *>(this);
	while (w -> parentWidget() && !w -> isWindow()) {
		w = w -> parentWidget();
	}
	// la fenetre est supposee etre un QETDiagramEditor
	return(qobject_cast<QETDiagramEditor *>(w));
}

/**
	@brief DiagramView::mouseDoubleClickEvent
	@param e
*/
void DiagramView::mouseDoubleClickEvent(QMouseEvent *e)
{
	if (m_event_interface && m_event_interface -> mouseDoubleClickEvent(e)) return;

	BorderTitleBlock &bi = m_diagram -> border_and_titleblock;

	//Get the click pos on the diagram
	QPointF click_pos = viewportTransform().inverted().map(e -> pos());

	if (bi.titleBlockRect().contains(click_pos) || bi.columnsRect().contains(click_pos) || bi.rowsRect().contains(click_pos)) {
		e->accept();
		editDiagramProperties();
		return;
	}
	QGraphicsView::mouseDoubleClickEvent(e);
}