mirror of
https://github.com/qelectrotech/qelectrotech-source-mirror.git
synced 2026-10-23 07:04:14 +02:00
Kellermorph
dc92a57873
Reading where a cable lands meant going back to the drawing: the strip editor said which cable a terminal carries and which core, but never what the cable goes to. A single core (1x16) could not be followed from the terminal to its piece at all. The new Target column names it: Installation, Location and Label (BMK) of the piece the wires land on, past this strip, joined in one line -- the very three fields the strip drawing writes in the box under its cable, in the same order (RealTerminal::cableTarget()). It is worked out of the project like the Cable cells and so follows their rule: a target the drawing names is read only, for only the drawing decides it, and a cell nothing is worked out for takes an edit, so a target the drawing cannot find -- a cable landing on a piece with no Installation, Location nor Label set, a cable going to another strip -- is still worth naming by hand. The text typed in is stored in the element (RealTerminal::cableTargetInfoKey()) and kept until a cable works a target out again, and back once that cable goes, exactly like a cable designation typed by hand: the automatic value is never written, so no stale text can be left behind. The column takes the width of its own text, so a long Installation is never cut off. A text typed in is written the way the fields are shown in the column, "Installation / Location / Label", and gives one line per field: the box under the cable draws three lines without any slash in them, just like a target worked out from the project, instead of one long line carrying its separators as text. tst_terminalcableauto checks the column is empty -- and editable -- without a cable, reads "Plant 7 / Cabinet 7 / -S7" with one, goes empty -- and editable again -- when the core is removed, takes no edit while the drawing names the target, and is headed "Target"; a second case checks a target typed in by hand is taken by the cell, stored by Apply, shown again by a fresh model, set aside for the read only target of the drawing once a cable lands somewhere worth naming, and back once that cable goes; a third one the line per field. tst_cable target paints a strip whose cable ends on one field and the same strip ending on three, the second box two lines deeper than the first.
122 lines
4.2 KiB
C
122 lines
4.2 KiB
C
/*
|
|
Copyright 2006-2026 The QElectroTech Team
|
|
This file is part of QElectroTech.
|
|
|
|
QElectroTech is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
QElectroTech is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with QElectroTech. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#ifndef MODELTERMINALDATA_H
|
|
#define MODELTERMINALDATA_H
|
|
|
|
#include <QColor>
|
|
#include <QString>
|
|
#include <QStringList>
|
|
#include "../../qetgraphicsitem/element.h"
|
|
#include "../realterminal.h"
|
|
|
|
struct modelRealTerminalData
|
|
{
|
|
///The Installation, Location and Label (BMK) of the piece the cable
|
|
///lands on, joined in one line : what the strip draws in the box
|
|
///under its cable (RealTerminal::cableTarget), in the same order.
|
|
///A target typed in by hand is one single line, and nothing is
|
|
///shown when the cable lands on nothing worth naming and no text
|
|
///was ever written in.
|
|
static QString targetText(const QVector<QString> &target_)
|
|
{
|
|
QStringList fields_;
|
|
for (const QString &field_ : target_)
|
|
{
|
|
if (!field_.isEmpty()) {
|
|
fields_ << field_;
|
|
}
|
|
}
|
|
return fields_.join(QStringLiteral(" / "));
|
|
}
|
|
|
|
static modelRealTerminalData data(const QSharedPointer<RealTerminal> &real_t)
|
|
{
|
|
modelRealTerminalData mrtd;
|
|
if (!real_t.isNull())
|
|
{
|
|
mrtd.level_ = real_t->level();
|
|
mrtd.label_ = real_t->label();
|
|
mrtd.Xref_ = real_t->Xref();
|
|
mrtd.cable_ = real_t->cable();
|
|
mrtd.cable_wire = real_t->cableWire();
|
|
mrtd.cable_target_ = targetText(real_t->cableTarget());
|
|
mrtd.cable_target_auto_ = real_t->cableTargetIsAutomatic();
|
|
mrtd.cable_auto_ = real_t->cableIsAutomatic();
|
|
mrtd.conductor_ = real_t->conductor();
|
|
mrtd.led_ = real_t->isLed();
|
|
mrtd.shield_ = real_t->isShield();
|
|
mrtd.separator_ = real_t->hasSeparatorAfter();
|
|
mrtd.color_ = real_t->color();
|
|
mrtd.stripe_color_ = real_t->stripeColor();
|
|
mrtd.section_ = real_t->section();
|
|
mrtd.width_mm_ = real_t->widthMm();
|
|
mrtd.catalog_entry_ = real_t->catalogEntry();
|
|
mrtd.type_ = real_t->type();
|
|
mrtd.function_ = real_t->function();
|
|
mrtd.element_ = real_t->element();
|
|
mrtd.real_terminal = real_t.toWeakRef();
|
|
mrtd.bridged_ = real_t->isBridged();
|
|
mrtd.spare_ = real_t->isSpare();
|
|
}
|
|
|
|
return mrtd;
|
|
}
|
|
|
|
int level_ = -1;
|
|
QString label_;
|
|
QString Xref_;
|
|
QString cable_;
|
|
QString cable_wire;
|
|
//Where the cable lands, past this strip : Installation / Location / Label
|
|
QString cable_target_;
|
|
//True when cable_target_ comes from the project (read only),
|
|
//false when it is empty or was typed in by hand (editable)
|
|
bool cable_target_auto_ = false;
|
|
bool cable_auto_ = false; //True when cable_ and cable_wire come from the cables of the project
|
|
QString conductor_;
|
|
bool led_ = false;
|
|
bool shield_ = false;
|
|
bool separator_ = false; //A separator plate is mounted after the terminal
|
|
QColor color_; //Invalid = no color set by the user
|
|
QColor stripe_color_; //Second color of a two-tone color, invalid if plain
|
|
qreal section_ = 0; //In mm2, 0 = no section set by the user
|
|
qreal width_mm_ = 0; //In mm, 0 = no width set by the user
|
|
QString catalog_entry_; //Terminal chosen in the catalog, empty if the width was typed
|
|
bool bridged_ = false;
|
|
bool spare_ = false; //Spare terminal, on no folio (RealTerminal::isSpare())
|
|
|
|
ElementData::TerminalType type_ = ElementData::TerminalType::TTGeneric;
|
|
ElementData::TerminalFunction function_ = ElementData::TerminalFunction::TFGeneric;
|
|
QPointer<Element> element_;
|
|
|
|
QWeakPointer<RealTerminal> real_terminal;
|
|
};
|
|
|
|
struct modelPhysicalTerminalData
|
|
{
|
|
QVector<modelRealTerminalData> real_data;
|
|
int pos_ = -1;
|
|
QUuid uuid_;
|
|
};
|
|
|
|
inline bool operator == (const modelPhysicalTerminalData &data_1, const modelPhysicalTerminalData &data_2) {
|
|
return data_1.uuid_ == data_2.uuid_;
|
|
}
|
|
|
|
#endif // MODELTERMINALDATA_H
|