ProjectView::askUserForFilePath() only appended the .qet extension when
FLATPAK_ID/SNAP_NAME were NOT set, on the assumption that the
xdg-desktop-portal file dialog used by sandboxed Snap/Flatpak builds
always appends the selected filter's extension itself (avoiding a
double ".qet.qet"). In practice, on the reporter's Snap/Ubuntu 22.04
setup the portal dialog does not append it, so the environment-based
skip left Save As producing a file with no extension at all.
Portal behavior isn't something QET controls or can reliably detect via
environment variables -- it depends on the desktop's actual portal
implementation/version. Rather than guessing per-environment, normalize
unconditionally: strip any existing .qet suffix (case-insensitive) and
re-append exactly one. This produces the correct single extension
whether or not the dialog already added it, on every environment.
Verified: clean rebuild, only the intended object file recompiled and
linked successfully. Wrote a standalone test of the normalization logic
covering no-extension, already-has-extension, uppercase-extension, and
a literal dot in the base filename -- all four produced exactly one
correct ".qet" suffix with no double-extension and no missing extension.
Not verified: the actual Snap-sandboxed portal dialog behavior itself,
since building/running the Snap package and testing its file-save
dialog under a portal is outside what's practical to set up in this
sandbox. Confidence rests on the fix removing the environment-guessing
entirely in favor of unconditional, dialog-implementation-agnostic
normalization, which is correct regardless of what the underlying
dialog does.
Fix crash changing dynamic text color and confirming with Enter (bugtracker #323)
Works like charm:
- color is updated immediately
- no additional errors or warnings
- no crash anymore!
Bugtracker #309: selecting a result from the Search/Replace hit list
highlights the matching element, but on a diagram too large to fit
the current view, the view itself never scrolls -- the highlighted
element can be entirely off-screen with no indication of where it
went. The reporter pinpointed the exact spot,
searchandreplacewidget.cpp:1022, and suggested repositioning the
view's scrollbars.
SearchAndReplaceWidget::on_m_tree_widget_currentItemChanged() already
calls setHighlighted()/setSelected() on the matched element, text, or
conductor when a hit is selected; it just never brings it into view.
Added a call to QGraphicsItem::ensureVisible() alongside each of the
three existing highlight/select calls, so the view scrolls the
minimum needed for the match to be visible.
Followed the same approach as JumpToElementDialog's
activateCurrentItem() (added this session for #676) rather than
computing scrollbar positions by hand as suggested: ensureVisible()
scrolls every view showing the diagram automatically, works correctly
if a folio is open in more than one window, and needed no lookup of
which QGraphicsView the widget is attached to -- this widget doesn't
currently hold one. It was the only existing precedent for this exact
"scroll to reveal a matched item" problem anywhere in the codebase.
Verified live: built and ran the app under Xvfb, zoomed into one
corner of an example diagram until it needed scrollbars, searched for
text appearing in two different elements ("Offset null", both
op-amp offset-null pins), and confirmed selecting each result
scrolled the view to a different part of the diagram, centering the
matched element's highlight circle in the visible area each time. No
new build warnings.
plc-user on PR #693: the crash is fixed, but the color/font field and
the on-diagram text no longer update until you leave the properties
list and click in the diagram -- previously it updated as soon as you
clicked OK.
That's a side effect of the crash fix itself. The old, crashing code
returned a *live* QColorDialog as the item view's editor; clicking its
OK button called accept()/hide() on it, and hiding the active editor
happens to trip the base delegate's own focus-lost commit path -- so
the value applied immediately, racily, as a side effect of the same
mechanism that crashed on Enter. The fix (commit 4bd9b6b21) replaced
that with running the dialog synchronously inside createEditor() and
returning an inert placeholder with the result stashed in a property.
Correct for the crash, but it also removed that accidental commit
trigger: the placeholder never had focus to lose, so nothing tells
the view to read the value back until some unrelated interaction
(clicking away) incidentally triggers it.
Fix: explicitly emit commitData()/closeEditor() for the resolved
editor, deferred via QTimer::singleShot(0, ...) since the view only
registers createEditor()'s return value as "the active editor" after
createEditor() itself returns -- emitting synchronously, before
returning, would target a widget the view doesn't know about yet.
Applied to both font and color, since both share the exact same
"resolve synchronously in createEditor(), return an inert
placeholder" shape and thus the exact same gap; font just hadn't been
reported.
Verified with the same standalone harness from the crash fix (real
QTreeView + DynamicTextItemDelegate + QAbstractItemView::edit()),
this time deliberately *not* sending the synthetic Enter keypress the
crash-fix verification needed: clicks the dialog's real OK button,
lets the event loop run, and confirms the picked color lands in the
model on its own. Also reconfirmed the crash fix itself still holds
(clean exit, no synthetic-Enter needed either way now) and did a full
Release build (504/504) with no new warnings.
Weekly cron replaced with a monthly run (1st of each month, 02:00 UTC)
to reduce unnecessary CI load.
retention-days raised from 14 to 40 across all six artifact uploads
(Qt5 + Qt6 tracks) to cover the new monthly interval with a safety
margin -- 14 days was shorter than the gap between two cron runs,
so the latest build's artifacts could expire before the next one
replaced them.
When multiple elements are pasted or moved in one batch, each call to
autoBreakConductors() now receives the shared state from the previous
call. This prevents two elements in the same batch from independently
claiming the same conductor, which would result in a double-delete on
redo().
Requested by ispyisail in PR review.
openTitleBlockTemplate needs a lambda: its matching overload has a default bool argument, so its pointer-to-member type
requires two parameters regardless of the default, while the signal provides only one -- no cast alone can both resolve the overload and
connect to a single-argument signal.
setAutoNum(QString)/setAutoNum(int,int) is a sender-side signal overload which needed a qOverload<QString> to match setFolioAutonum's
single-argument slot.
etc.), these three are ambiguous on the *slot* side:
activateProject(QETProject*)/activateProject(ProjectView*),
closeProject(ProjectView*)/closeProject(QETProject*), and
showError(const QETResult&)/showError(const QString&) each have two declarations on QETDiagramEditor. &QETDiagramEditor::activateProject
etc. alone won't compile with two candidates present; qOverload<T>() picks the one matching the actual signal's argument type, same as
the old SIGNAL()/SLOT() macro text did implicitly.
Default arguments aren't part of a function's pointer-to-member type, so &Class::slot has a type requiring the argument regardless of its
default value -- incompatible with a signal providing none, and &Class::slot alone won't compile against these signals at all.
When migrating to the modern member pointer connect, replaced with a lambda that calls the slot with no arguments, letting
the default apply exactly as before.
- SelectAutonumW::applyEnable(bool = true), connected to each NumPartEditorW's changed() signal in both setContext() and
on_add_button_clicked(). The corresponding disconnect() in on_remove_button_clicked() is removed rather than reimplemented: a
lambda-based connection can't be matched and removed by a separately-written disconnect() call, and the explicit disconnect
was already redundant -- the very next line deletes the part object, which Qt automatically disconnects on destruction (the same
guarantee setContext()'s own qDeleteAll() cleanup already relies on).
- PartText::adjustItemPosition(int = 0), connected to QTextDocument::contentsChanged().
- ExportDialog::slot_changeFilesExtension(bool = false), connected to ExportPropertiesWidget::formatChanged().
since QComboBox::activated(QString) still exists pre-Qt6 and makes &QComboBox::activated alone ambiguous:
- StyleEditor: outline_color/line_style/size_weight/filling_color,
both connect (activeConnections(true)) and disconnect
(activeConnections(false)) branches. antialiasing's stateChanged(int)
connect modernized alongside them (single signal, no disambiguation
needed).
- TitleBlockTemplateCellWidget: cell_type_input_ (two connects to
different slots), horiz_align_input_, vert_align_input_, logo_input_.
Also modernises QETApp's system tray connect.
In two cases stateChanged already replaced with version guarded checkStateChanged for future proofing.
setTransformOriginPoint() was only applied inside
parentElementRotationChanged(), so loading an already-rotated element,
or enabling keep_visual_rotation while rotation_point_center was
already true, left the origin at (0, 0) until the next parent rotation.
Apply the origin directly in both setters so it's always in sync.
Added .ts files (de and en) to the commit
QComboBox::currentIndexChanged(QString) still exists pre-Qt6.
TitleBlockTemplateLocationChooser: collections_ -> updateTemplates() (a virtual method; pointer-to-member dispatch still resolves to the
TitleBlockTemplateLocationSaver override at runtime as expected)
TitleBlockTemplateLocationSaver: templates_ -> updateNewName()
TitleBlockPropertiesWidget: m_tbt_cb -> changeCurrentTitleBlockTemplate(int)
XRefPropertiesWidget: m_type_cb -> typeChanged(), m_snap_to_cb ->enableOffsetSB(int), both connect (constructor) and disconnect(destructor)
Two QButtonGroup::buttonClicked overload-ambiguity fixes, plus cleanup of the connects sitting alongside them:
TitleBlockDimensionWidget: switched from the deprecated buttonClicked(int) id-based overload to buttonClicked(QAbstractButton*),
disambiguated via qOverload. The slot doesn't use the argument either way, so this is a pure modernization with no behavior change.
ExportPropertiesWidget: same buttonClicked fix for exported_content_choices, plus modernized the adjacent
currentIndexChanged(int) relay (disambiguated via qOverload, since QComboBox::currentIndexChanged(QString) still exists pre-Qt6) and
six QCheckBox::stateChanged(int) relays (single signal, no disambiguation needed).
QCheckBox::stateChanged(int) is deprecated as of Qt 6.7 in favor of checkStateChanged(Qt::CheckState), but this project has no Qt6 minor
version floor pinned in CMakeLists.txt, so stateChanged(int) remains the correct unconditional choice for now. QT_VERSION_CHECK(6, 7, 0) guarded
checkStateChanged was introduced to avoid future warnings.
plc-user