DiagramView::zoom() had the same unbounded scale() as the element editor:
a held scroll-wheel zoom could overflow the view transform. Clamp the
resulting scale to [m_min_zoom, m_max_zoom] before applying it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HdWpDp3TrPKbHnv7YUcNJj
ElementView applied scale() on every wheel notch with no bound on the
resulting view transform. Held down, the scroll-wheel zoom drives the
transform scale (m11) to floating-point overflow; the transform becomes
non-invertible, mapToScene() returns NaN and the next background paint
aborts the editor ("program closes completely" as reported on Windows).
Route zoomIn/zoomOut/zoomInSlowly/zoomOutSlowly through a new
scaleClamped() helper that only applies the scale while the result stays
within [m_min_zoom, m_max_zoom] (0.1 .. 200). Behaviour within that range
is unchanged.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HdWpDp3TrPKbHnv7YUcNJj
CFBundleIconFile in misc/Info.plist was set to qelectrotech.icns, including the file extension.
Per Apple convention this key should hold the icon name without the extension — macOS appends .icns itself.
On recent macOS versions this mismatch causes the Finder to fall back to the generic placeholder icon instead of the actual app icon.
Fix: CFBundleIconFile → qelectrotech (no extension), matching the existing CFBundleTypeIconFile entries (elmt, titleblock, qet) which were already correct.
**1. `autonumberingmanagementw.ui`: legacy Qt5 font weight**
`uic` emitted `font.setWeight(75)` / `setWeight(50)` from old `<weight>` XML properties. Qt6's `QFont::setWeight()` takes a `QFont::Weight` enum instead of a raw int, so this fails to compile. GCC apparently tolerates it as a warning (`-fpermissive`), but it's a hard error on Apple Clang. `<bold>` was already set on every affected widget, so the `<weight>` tags were redundant — dropped.
**2. `CMakeLists.txt`: no macOS app bundle**
The executable target had no macOS-specific handling (`if(WIN32)/else()` only), so CMake produced a flat Mach-O binary instead of a `.app` bundle — nothing for `macdeployqt`/codesign/DMG steps to package. Added `MACOSX_BUNDLE` via `set_target_properties(APPLE)`. This in turn made `install(TARGETS ...)` fail configure (`no BUNDLE DESTINATION for MACOSX_BUNDLE executable`), so added `BUNDLE DESTINATION .`. Both changes are no-ops on Linux/Windows.
Built successfully end-to-end with `MacQetDeploy_arm64_cmake.sh` on macOS 14, arm64, Qt 6.11.1 (Homebrew) + KF6.
Without this, CMake produced a plain Mach-O binary on macOS instead
of a .app bundle, so MacQetDeploy_arm64_cmake.sh's cp/macdeployqt/
codesign steps had nothing to package. No effect on Linux/Windows.
Qt6's QFont::setWeight() now takes a QFont::Weight enum instead of
a raw int, so uic-generated code from the old <weight>75/50</weight>
XML properties fails to compile (worked on GCC via -fpermissive,
but hard error on Apple Clang for the macOS build).
<bold> is already set on all affected widgets, so <weight> was
redundant and can be dropped without any visual change.
Follow-up to the review of #790: four pre-existing messages whose source
is the DEGREE SIGN (U+00B0) were translated with the MASCULINE ORDINAL
INDICATOR (U+00BA) — GeneralConfigurationPage, IndiTextPropertiesWidget,
ReplaceConductorDialog and TextEditor. They render as an ordinal in the
rotation spin box suffixes.
Also fixes punctuation in the two SelectAutonumW help texts: a stray
space in "N ° página" / "n ° da página" and two unbalanced quotes.
Sources, comments, message count and ordering are untouched (2850
messages, 0 unfinished); .qm regenerated with lrelease.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N9qWZfNpKZqrAzUE2QB3TJ
Finish the 364 messages still marked unfinished in lang/qet_pt_BR.ts,
bringing pt_BR from 87.2% to 100% of the 2850 messages. Of those, 228
were empty and are translated here; the remaining 136 carried Linguist
suggestions that were reviewed, 14 of them corrected. Several contexts
were previously untranslated in full: ContactGroupSelectionDialog,
PlcLinkWidget, TerminalNumberingDialog, ShortcutsConfigPage,
BackupDialog, DiagnosticsReportDialog, GuidesPropertiesWidget,
PdfPagesDialog and EdzArchive.
Terminology follows what the file already established: "borne" ->
"terminal", "bornier" -> "régua de terminais", "folio" -> "página",
"cartouche" -> "bloco de legenda", "schéma" -> "esquema",
"maître/esclave" -> "mestre/escravo", "pivoter" -> "girar". PLC terms
use the Brazilian abbreviation CLP, and NO/NC contacts use NA/NF.
Notable fixes among the reviewed suggestions: "Annuler" read "Desfazer"
(undo) where it is a dialog button next to OK, and the degree symbol
used U+00BA MASCULINE ORDINAL INDICATOR instead of U+00B0 DEGREE SIGN.
Only <translation> elements are touched; sources, locations and
comments are unchanged. lang/qet_pt_BR.qm is regenerated with lrelease.
QETProject::removeDiagram() detaches a diagram from m_diagrams_list and
schedules it via deleteLater(), but that deferred delete only runs on
a future event-loop iteration. If ~QETProject() runs first (e.g. a
CLI/headless caller with no event loop, or a project closed
immediately after removeDiagram()), the diagram is still a QObject
child of the project and gets destroyed later by QObject's own
automatic child cleanup -- which runs after m_data_base has already
been torn down as a plain C++ member. Diagram::~Diagram() calls back
into dataBase()->removeElement() for each of its elements, so that
ordering is a use-after-free (SIGSEGV in QSqlResult::exec()).
Delete any such still-parented diagrams synchronously in ~QETProject()
while m_data_base is still alive, before the base QObject destructor
runs. Any deleteLater() event that does eventually fire afterward is a
safe no-op on an already-deleted QObject.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
removeDiagram() only ever deleted the diagram's own row. No foreign key in
this schema is declared ON DELETE CASCADE (and SQLite foreign-key
enforcement is never turned on for this connection anyway), so removing a
diagram left every element, element_info, terminal and conductor row that
belonged to it behind in the database -- silently, since nothing reads them
until the next full updateDB() rebuild papers over it.
Traced why this had never crashed anything: Diagram::~Diagram() explicitly
walks and deletes its top-level items through removeItem() (which does call
dataBase()->removeElement() correctly), but deliberately skips conductors --
because a conductor's destructor touches both of its terminals
(terminal1->removeConductor(this)), and those terminals may belong to an
element already destroyed earlier in the same sweep. Conductors are instead
destroyed as a side effect of Terminal::~Terminal()'s qDeleteAll() on its own
conductor list, which is a plain C++ delete that never goes through
Diagram::removeItem() and therefore never calls dataBase()->removeConductor()
at all. So the object graph is torn down safely, but the database is never
told about the conductors or their terminals.
Fixed by adding the missing bulk deletes to projectDataBase::removeDiagram()
itself, run while the diagram (and its live scene) still exist -- verified
that QETProject::detachDiagram() emits diagramRemoved() (which this class's
constructor connects to this slot) synchronously, before the Diagram object
is scheduled for destruction via deleteLater(), so nothing here races the
C++ teardown described above. Order matters: element_info and terminal have
no diagram_uuid column of their own, so both are scoped through a subquery
on element and must run before element itself is deleted.
Verified against examples/industrial.qet (50 diagrams) by calling
projectDataBase::removeDiagram() directly and comparing table counts before
and after, with no intervening updateDB() call to mask a gap:
element=354->335 element_info=354->335 terminal=1087->1033 conductor=671->626 diagram=50->49
Every delta matches a direct SQL count for that diagram's own rows exactly
(19 elements, 54 terminals), and both "orphan rows still referencing the
removed diagram" checks read 0 afterward -- so the cascade is complete and,
just as importantly, scoped: nothing belonging to the other 49 diagrams
moved.
Separate finding, not fixed here: QETProject::removeDiagram(Diagram*) (the
synchronous, non-undoable variant, not the usual GUI
ProjectView::removeDiagram() path) segfaults if the enclosing QETProject is
destroyed before an event loop iteration lets its pending deleteLater() run
-- reproduces identically on unmodified master, so it predates and is
unrelated to this change. Worth its own report; a headless caller is the
only realistic way to hit it, which is how this surfaced.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ElementQueryWidget::queryStr() reads FROM element_nomenclature_view, and that
view already excludes flagged elements in its own WHERE clause (see
createElementNomenclatureView() in projectdatabase.cpp). This widget then
added a second condition on top: "exclude_from_bom IS NULL OR
exclude_from_bom != '1'" -- but nothing anywhere ever writes the literal
string "1" to this key (the only writer stores "true"/"false"), so the
clause was true for every row that could possibly reach this point and did
nothing.
Confirmed dead three separate ways while reviewing qelectrotech#765: reading
the value only ever comes back "true" or "false" (never "1"), an
exclude_from_bom="1" element still appeared in --export-bom output on a test
fixture, and the surrounding filter_ construction shows this AND'd clause
cannot change the query's result set regardless of what filter_ already
holds. Confirmed it a fourth way once already, by initially misreading this
same clause as evidence the feature was broken -- it was reading the WHERE
without the FROM three lines above, which is exactly the trap being removed
here for the next reader.
ElementQueryWidget backs the BOM export dialog and the diagram table
properties widget; neither has a headless CLI equivalent, so this could not
be verified end-to-end through --export-bom the way the case-insensitivity
fix could. Verified instead: the file compiles clean, and a
load/resave/--export-bom smoke test on examples/tremie_vibrante.qet shows no
change in app behaviour (98 components, matching the pre-change baseline --
expected, since --export-bom does not go through this widget at all).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Saving an unmodified project produced a different byte stream on
every run: QGraphicsScene::items() returns items in stacking order,
and ties between same-Z items follow the scene's internal index --
not any content-derived order -- so it isn't reproducible across
process runs. The legacy terminal-id table inherits the same
instability, since ids are assigned sequentially in element order.
Sort list_elements and list_conductors into a deterministic order
before serializing, using a key built from data that's actually
stable across loads (position), not Element::uuid()/Conductor::uuid():
for an item with no persisted uuid attribute, fromXml() invents a
fresh random one on every load, so sorting by uuid would still be
non-deterministic across process runs for any legacy file -- which
this corpus has plenty of.
Also fixes a second, related source of byte-level non-determinism
found while verifying the above: Conductor::toXml() unconditionally
wrote m_uuid back out, including the synthetic value fromXml() just
invented for a conductor with no uuid attribute in the file. Every
conductor in every example project checked has no persisted uuid at
all, so this alone meant no project with conductors could ever
resave identically, regardless of ordering. Conductor gets a
m_persist_uuid flag, false only when the uuid it's holding was
synthesized rather than loaded, so toXml() stops writing a value
that was never meant to be permanent.
Deliberately NOT applying the same uuid-persistence fix to Element:
element uuids are cross-referenced by other elements' <links_uuids>
blocks for master/slave/report linking (element.cpp, tmp_uuids_link,
matched by elmt->uuid() == stored uuid on load). Making an element's
own uuid non-persistent would silently break that match for any
linked element without one already -- a real regression, not a
theoretical one. Left as a smaller, separate residual: 1-6 elements
per project across the corpus (a few tenths of a percent) still get
a fresh uuid on each load, same class of bug, needs the link-aware
version of this fix instead of this one.
Verified against 8 example projects (the ones with conductors, plus
the two zero-conductor control cases from FINDINGS.md F002), 5
resaves each in isolated HOME/XDG environments:
- Element and conductor ORDER: 0 churning sections across the whole
corpus (previously the majority of diagrams in industrial.qet,
m_000.qet and tremie_vibrante.qet churned on every run).
- Conductor uuid VALUES: 0 churn (previously every conductor in
every project, since none have a persisted uuid).
- 6 of 8 projects are now byte-for-byte identical (md5) across all 5
runs. The remaining 2 (industrial.qet, m_000.qet) differ only in
the handful of element uuids covered by the known Element residual
above -- confirmed by checking those uuids specifically, not
inferred.
- Element/conductor counts before and after resave match exactly on
every project (no data loss from the sort).
Fixes#754.
redo() has a direct-write path guarded by m_first_time: on the very
first call it writes the property immediately, and only animates on
calls after that (per setAnimated()'s documented contract). undo()
had no equivalent -- it always animated, so undo() both returned
before the property was restored (stale state visible to anything
sharing the call stack) and, with no running event loop, never
restored it at all.
The obvious fix -- reuse m_first_time in undo()'s guard too -- turns
out not to work, and I verified this with a standalone build before
picking an approach: QUndoStack::push() always calls redo() once
before any undo() can run, and redo()'s direct-write branch sets
m_first_time = true as it completes. So by the time undo() is ever
called, m_first_time has already flipped, and reusing it would make
undo() take the animate branch on every call, unconditionally --
syntactically symmetric with redo(), but behaviourally unchanged for
the exact scenario reported.
Instead, undo() gets its own m_undo_first_time flag, seeded from the
same first_time argument setAnimated() already takes, and set true by
undo()'s own direct-write branch the same way m_first_time is set by
redo()'s. That gives undo() a real, reachable direct-write path on its
own first call, independent of how many times redo() has already run.
Verified against a standalone build of just this class (as the issue's
own repro does): first redo and first undo are both now synchronous
with no event loop running; with an event loop present, both settle to
the correct value once "broken in"; behaviour for every other caller
of QPropertyUndoCommand -- everywhere that calls plain enableAnimation()
or the bare setAnimated() (first_time defaulting true) -- is provably
unchanged, since m_undo_first_time starts true either way and the
animate branch never modifies it.
Fixes#755.
- Remove dead #if QT_VERSION conditionals (both branches were identical)
- Add settings.remove() guard on restoreState() failure consistently
across all three editors (now safe since all run after show())
The Windows Qt5 build is going to be removed from CI/CD soon (Qt6/KF6
is becoming the sole supported track). Replace the 'experimental'
warning wording on the nightly download page and in the nightly
release body with a call to action inviting users to switch to Qt6
now and report issues, ahead of the Qt5 removal.
QPdfDocument::pagePointSize() (used for PDF page import) requires
Qt >= 6.4, and the QtPdf module itself is missing entirely on some
Qt6 distributions (e.g. the Flatpak org.kde.Platform runtime), since
it ships from the qtwebengine source tree rather than Qt6 core.
CMake: probe Pdf with find_package(... QUIET) instead of REQUIRED,
mirroring the existing GuiPrivate pattern. Define QET_HAS_QTPDF
only when the module is found AND Qt >= 6.4.
Replace the ad-hoc QT_VERSION_CHECK(6, 0, 0) / (6, 4, 0) guards in
qetdiagrameditor.cpp, diagrameventaddpdf.{h,cpp} and
pdfpagesdialog.{h,cpp} with #ifdef QET_HAS_QTPDF, so version and
module-availability checks live in one place.
Fixes the Flatpak build (missing Qt6Pdf) and the Windows/Debian CI
failures (QPdfDocument::pagePointSize undeclared on Qt < 6.4). The
PDF import toolbar action is now silently unavailable wherever
QtPdf isn't usable, instead of breaking the whole build.
Compiled into the binary but never instantiated -- searching the tree
for any reference outside its own three files finds nothing, and this
still holds on current master. Contains a latent bug that would be
user-visible if the widget were ever reachable
(on_tableDiagram_customContextMenuRequested compares QMenu::exec()'s
return value against one action but falls through to "select all" on
both the other action and on a plain dismiss, since exec() returns
nullptr on Escape/click-away and that's not equal to either QAction*),
which supports genuine disuse rather than temporary disconnection.
Removed the three files and their three explicit entries in
cmake/qet_compilation_vars.cmake (qelectrotech.pro globs sources/ui/*
so needs no change). Builds clean; no other file references
diagramselection.
Fixes#756.
m_jump_to_element was the only action in the tree that set its
QKeySequence directly instead of going through
ShortcutManager::registerAction() -- of 98 actions carrying a runtime
shortcut, 95 matched a registerAction() call, 2 were Qt built-ins, and
this was the sole exception (verified by dumping every QAction from a
running instance and cross-checking against a static scan of the
source; the only other setShortcut() call in the tree clears a
shortcut rather than setting one).
Bypassing the registry meant the binding didn't appear on the
Shortcuts preferences page (so it couldn't be discovered or rebound),
and checkConflicts() couldn't see it either, so assigning Ctrl+G to
another action there would silently collide at runtime instead of
being flagged.
Fixes#758.
ispyisail