openAndAddProject() shows BackupDialog as a stack object parented to the
editor and exec()s it; every QET::QetMessageBox does the same. exec() runs a
nested event loop, and closing the editor during it turns WA_DeleteOnClose
into a deleteLater() that the nested loop processes: ~QWidget() deletes the
editor's children, the stack-allocated dialog among them, and the process
aborts. Reported on macOS, where File > Quit lives in the application menu
and stays usable while the backup question is up.
The close is now refused while any modal widget is active, and the dialog is
raised so the refused quit is not silent. It is done in QETMainWindow::event()
rather than in closeEvent(), because QETDiagramEditor::closeEvent() starts
closing projects before it decides whether to accept. That covers the diagram
and title-block editors; QETElementEditor is a plain QMainWindow, so its
closeEvent() calls the same helper before canClose(), which itself opens a
modal. QETApp::quitQET() needs nothing: closeEveryEditor() goes through each
editor's close(), and quitQET() already only quits when every close succeeded.
Rejected alternatives, both suggested on the issue:
- Giving the dialog no parent stops the abort but not the deletion. One
caller of openAndAddProject() is the editor's own constructor, which goes
on to open the next file and call slot_updateActions() on this -- a loud
abort would become a silent use-after-free.
- Guarding only QETApp::closeEveryEditor(), which I first recommended on the
issue, misses the reported route entirely: File > Quit is connected to
QETDiagramEditor::close(), not to quitQET().
Verified on Linux, where there is nothing to click (the menu bar belongs to
the blocked window, and Qt ignores window-manager close requests for it), by
calling close() from gdb while the dialog's loop was running -- both
QETApp::quitQET() and QWidget::close() on the editor. Unfixed, both abort
with "free(): invalid size" in QObjectPrivate::deleteChildren() under
~QETDiagramEditor(), matching the report frame for frame; fixed, close()
returns false, the editor and the dialog stay up, and after answering the
dialog Ctrl+Q exits normally. The element-editor guard is the same helper
but was not exercised separately.
tests/modal-quit-regression/ turns that into a gate: it breaks on
QDialog::exec(), interrupts inside the nested loop, calls quitQET() and
checks the process survives. It matches no window titles (translated) and no
window ids, runs on the offscreen platform, and needs only gdb with Python.
Checked both ways: exit 1 with the backtrace above on a build without this
change, exit 0 with it.
ctest 8/8.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
QET had no icon theme: the 446 entries of the icon table and the 116
iconsets in .ui files each named a resource path, so an icon could only
ever be one file, and a variant for another palette or a vector source
had nowhere to go (GitHub #466, #690, #870). This adds the theme layout
without changing a single pixel; a dark variant comes in a follow-up.
The theme "qet" follows the freedesktop layout Qt's icon loader
understands. misc/make_icon_themes.py generates ico/icon-themes.qrc,
which aliases the existing ico/<size>/<name>.png files into
themes/qet/<size>/<name>.png, and ico/themes/qet/index.theme. No file
moves. The four table entries that paired a 16 pixel file with a 22
pixel file of another name (ConductorSettings, DiagramAdd,
DiagramDelete, DialogInformation) get the 22 pixel file aliased under
the 16 pixel name.
QETApp::initIconTheme() registers the theme before initIcons() and makes
it current on every platform, so a desktop icon theme cannot replace
QET's icons. Icons are then looked up by name: QIcon::fromTheme() in
qeticons.cpp and in the few places that built a QIcon from a resource
path directly, and theme="..." on the iconsets in .ui files, with the
resource path kept as fallback. Flags, color swatches, application and
MIME icons stay on their paths.
One entry does not go through the theme. The elements panel draws the
project root with ProjectFileGP in the 50 pixel slot it reserves for
element previews, and the name "project" also carries the 128 pixel
file the configuration dialog uses. On a 2x display Qt's loader picks
that file for a 50 pixel request and fills the slot. ProjectFileGP
loads the 16 and 22 pixel files directly, as before.
tests/qttest/tst_qeticons: every name in the theme resolves, the four
aliases resolve at 22 pixels, a Fusion tool button shows its icon at
3:1 with disabled weaker than enabled, and the project root icon stays
at 22 pixels or less when asked for 50 at 2x while the configuration
dialog still gets its 128 pixel file. The rendering helpers shared
with tst_qetpalette moved to tests/qttest/inkcontrast.h.
LineEditor::setPart() no-ops (skipping updateForm()) when the part
passed in is already m_part. That is harmless when the editor widget
is torn down between selections, but this branch keeps the same
editor instance installed across selection changes instead of
recreating it, so a line already shown alone can also be
parts.first() of a later multi-selection -- and the x1/y1/x2/y2
spinboxes then keep showing whatever was in them before, not this
selection's actual first line.
setParts() now always calls updateForm() after setPart() succeeds,
closing the gap regardless of the identity check inside setPart().
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Making the Informations tab visible for Slave elements is only half the
change: ElementScene::toXml() writes the <elementInformations> block for
Simple, Master, Terminal and Thumbnail, and Slave was not in that list. It
is the only place in the tree that writes that block, so the editor would
have shown an editable tab for a slave, accepted whatever the user typed
into it, and dropped it silently on save.
Visible in the shipped collection, which matches the condition exactly:
0 of 75 slave elements carry an <elementInformations> block, against 41 of
70 terminal elements.
Adding Slave is safe in both directions. ElementData::fromXml() reads
<elementInformations> unconditionally, with no check on the base type, so
existing slave elements are unaffected and newly written ones load back
correctly. It also makes populateTree()'s PLC-slave branch reachable for
the first time -- the five PLC info rows it adds are stored in
m_informations, so until now they could not have been saved either.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Mirror (M) and Flip (F) in the element editor reflected the selected
parts across the element origin: every part's mirror() and flip()
negated the scene x or y coordinate. A part drawn to the right of the
origin landed the same distance to the left, so the selection jumped
to the other side of the canvas instead of turning around.
MirrorElementsCommand and FlipElementsCommand now compute the united
scene bounding rectangle of the selected items and reflect across the
vertical or horizontal line through its center. The center is snapped
to the nearest half of the diagram grid, so points that were on the
grid stay on the grid after the reflection. Terminals in particular
keep their grid alignment.
Each part's mirror() and flip() takes the axis coordinate as a
parameter with a default of 0, so the previous behavior remains
available to any other caller. The command stores the axis when it is
created and undo reapplies the same reflection, which is its own
inverse, so the existing undo path is unchanged.
Parts covered: PartArc, PartDynamicTextField, PartEllipse, PartLine,
PartPolygon, PartRectangle, PartTerminal, PartText.
Fixes#812
1. Drop dead prepareGeometryChange()/update() calls in
setPotential(), split unrelated terminaleditor.h re-indent into its
own change
2. Removed: setPotential() had prepareGeometryChange()/update() left over from
the label-display mechanism that was dropped before this PR
New QLineEdit (m_potential_le) between Type and Nom: an optional,
symbol-author-chosen grouping identifier shared by terminals that
belong to the same physical terminal within a multi-terminal block.
Stored as TerminalData::m_potential (new field, persisted as the
"potential" XML attribute, empty by default).
Used by relatedPotentialTerminal() in terminal.cpp: when
potential_isolating is enabled on a Terminal-type element, terminals
sharing a non-empty, matching potential value now stay electrically
linked to each other instead of every terminal in the block being
isolated from every other one.
Tooltip on the field for explanation
ElementView applied scale() on every wheel notch with no bound on the
resulting view transform. Held down, the scroll-wheel zoom drives the
transform scale (m11) to floating-point overflow; the transform becomes
non-invertible, mapToScene() returns NaN and the next background paint
aborts the editor ("program closes completely" as reported on Windows).
Route zoomIn/zoomOut/zoomInSlowly/zoomOutSlowly through a new
scaleClamped() helper that only applies the scale while the result stays
within [m_min_zoom, m_max_zoom] (0.1 .. 200). Behaviour within that range
is unchanged.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HdWpDp3TrPKbHnv7YUcNJj
- Remove dead #if QT_VERSION conditionals (both branches were identical)
- Add settings.remove() guard on restoreState() failure consistently
across all three editors (now safe since all run after show())
Apply the same split readSettings()/readSettingsState() pattern from
QETDiagramEditor to the other two main windows:
- QETElementEditor: split in constructor, call readSettingsState() after show()
- QETTitleBlockTemplateEditor: split readSettings(), callers call
readSettingsState() after show() (newTemplate + 2x openTitleBlockTemplate)
- Remove destructive settings.remove() guards that would delete saved
state on every Qt6 launch when restoreState() fails before show()
Co-authored-by: ispyisail
setTabVisible(1, ...) only allowed Simple and Master, but the tree
(updateTree()) and the actual write path (ElementScene::toXml()) both
already support elementInformations for Terminal and Thumbnail too --
three independent "is this type allowed" checks that were never
reconciled, leaving already-working support unreachable through the
UI for those two types. Slave stays excluded here, consistent with
having no elementInformations support at either of the other two
points either (separate, larger gap, not addressed here).
"false" writes, delete key instead
Unchecking a checkbox previously wrote the key with value "false"
rather than omitting it -- behaviorally identical to every consumer
(all three do a case-sensitive == "true" comparison), but left dead
entries cluttering the .elmt file, inconsistent with how other
elementInformation fields (manufacturer, designation) are only present
when actually set. Now removes the key entirely when unchecked.
- ElementInfoWidget::currentInfo() now skips a field whose validator
hasn't accepted its text (e.g. a lone "." mid-typing), which
previously stored and later parsed to 0.
- New QETInformation::NumericInfoValidator rewrites "," to "." before
validating, so 80,5 on a German/French keyboard no longer silently
becomes 805. Used at both existing call sites.
- Restored the header's #1/#2/#3 doc comment (was reflowed into a
run-on paragraph by a previous edit).
checkboxes to the element editor
These elementInformation keys were previously only editable on an
already-placed instance (via ElementInfoWidget on the diagram side).
Since elementInformation values are seeded from the .elmt file's own
<elementInformations> block at placement time, a symbol author had no
proper way to set these as the *default* for every future placement --
only a workaround via the generic, unvalidated key/value tree.
Adds dedicated checkboxes to ElementPropertiesEditorWidget, mirroring
ElementInfoWidget's own labels/behavior: auto_num_locked and
potential_isolating inside the existing terminal-only group
(m_terminal_gb, shown only for ElementData::Terminal), exclude_from_bom
always visible regardless of type. Written after the generic tree loop
so they take precedence over any stale raw entry for the same key.
No new storage or file format change -- purely a missing editor UI for
an already-existing mechanism.
During an ESEvent, the mouse position was used without format with
`snapToGrid` to display the coordinates. However, since the `helpCross`
is positioned using `snapToGrid` during these events, the displayed
coordinates did not match the `helpCross` position.
The command for sending the coordinates has been moved to the
`ESEventInterface` to function 'updateHelpCross' and now transmits the
position of the intersection point of the helpCross lines.
Follow-up to #158 / PR #501. While investigating that position bug,
found a second, separate one in the same area: PartText::setFont()
never updated real_font_size_, so it stayed frozen at whatever size the
item was constructed with.
That field isn't cosmetic - it's live data two other operations depend
on:
- startUserTransformation()/handleUserTransformation() use it as the
base size when scaling the font as the user drags a resize handle.
With it stale, dragging a handle after changing the size via the
toolbar (or loading a file with a non-default size) scales from the
wrong starting point - the resulting size has nothing to do with
what's visibly on screen.
- flip() reads it directly to compute the repositioning offset, so a
stale value also mis-positions the item on flip.
Fix: update real_font_size_ inside setFont(), the same place PR #501
already re-runs adjustItemPosition() for the same reason (font changed,
keep everything that depends on it in sync). fromXml() already routes
both its "size" and "font" attribute branches through setFont(), so
loaded elements pick this up for free.
Verified with a temporary instrumented build: typed a size into the
element editor's font-size field three times (9 -> 4 -> 48). Each
setFont() call's "before" value exactly matched the previous call's
"after" value, confirming real_font_size_ now tracks every change
instead of freezing at its construction-time value (9). Instrumentation
removed before committing.
Opening an element you cannot write -- anything from the QET collection,
for instance -- disabled Copy along with everything else, so there was no
way to reuse a primitive from it. The workaround was to save the whole
element into your own collection first, just to take one shape out of it.
Two actions stood in the way, and neither of them modifies anything:
- Select All and Invert Selection were in the list disabled outright when
read only, so nothing could be selected in the first place;
- Copy was enabled only when "!m_read_only && selectedItems().count()", so
even a mouse selection left it greyed out.
Both now work on a read-only element. Copy is safe there:
ElementScene::copy() serialises the current selection to the clipboard and
touches neither the element nor the file.
Cut, Paste, Paste-in-area, Delete, Rotate, Flip, Mirror, the depth actions
and the add-primitive tools stay disabled exactly as before, so the element
is still protected -- this only stops the editor from refusing to read out
what it is already displaying.
Verified with a chmod 444 element: Select All then Copy now work, the
clipboard receives the expected <definition> with all three primitives,
Cut/Paste/Delete remain greyed out, Save stays disabled, and the file is
untouched (same permissions, same checksum).
a) using a system provided KF6
b) downloading and compiling KF6
c) using the vendored-in re-creation of the functionality
The behaviour for both Qt5 and Qt6 is steered with the same two variables which were renamed to become version agnostic:
a) BUILD_WITH_KF=ON BUILD_KF=OFF
b) BUILD_WITH_KF=ON BUILD_KF=ON
c) BUILD_WITH_KF=OFF
The version is automatically derived from the chosen Qt major version.
Address feedback on the width/height/depth elementInformation fields:
- The regex accepted "." alone as a complete value ([0-9]* permits
zero digits on both sides), meaning a field could be committed with
a literal "." saved to the XML. Require at least one digit either
before or after the separator.
- The same pattern was duplicated verbatim in elementinfopartwidget.cpp
and elementpropertieseditorwidget.cpp's EditorDelegate. Factored into
QETInformation::numericInfoPattern(), a single shared definition both
call sites now use.
- Tightened the pattern to at most 2 decimal places (down from 4) to
match the precision actually meaningful for these fields.
Not changed, by design:
- Storage stays a plain string, consistent with every other numeric
elementInformation field (quantity etc.) in this codebase -- values
round-trip through XML text regardless, so a long/micron
representation wouldn't avoid the string<->number conversion, only
relocate it.
- No decimal-comma normalization needed: with the fixed pattern, only
digits and "." are ever accepted at the keystroke level, so an
alternate separator can't enter the field in the first place.
Selecting more than one dynamic text field in the element editor silently
replaced every selected field's colour with the colour of the first one.
Nothing was clicked -- merely extending the selection destroyed the others'
colours, and the change went onto the undo stack as if the user had asked
for it.
Cause: updateForm() loads the current part's colour into the colour button
with m_color_kpb->setColor(). KColorButton::changed is emitted for a
programmatic setColor() just as it is for user interaction, and it is
connected to m_color_kpb_changed(), which applies the new colour to *every*
part in m_parts. So simply displaying the first part's colour wrote that
colour to all the others.
Every other widget in updateForm() is immune because it is wired to a
user-only signal -- on_m_x_sb_editingFinished(), on_m_frame_cb_clicked() --
which setValue() and setChecked() do not emit. The colour button is the one
control whose signal cannot distinguish the two, so block it while loading.
This also explains why the reporter saw it only when rubber-band selecting
bottom-to-top: the write happens only when the first part's colour differs
from what the button already shows, which depends on selection order.
Verified in the element editor with two dynamic texts, one red and one blue:
select the red one, then ctrl-click the blue one. Before: the blue text
turned red. After: both keep their colours. Changing the colour deliberately
with the button still applies to all selected texts, as intended.
The selection properties dock (elementinfopartwidget.cpp) and the
element editor's information tree (elementpropertieseditorwidget.cpp's
EditorDelegate) both restrict the width/height/depth fields added for
cabinet layout support to numeric input via a validator.
QDoubleValidator follows the system/UI locale for its decimal
separator, which meant a comma was accepted as an intermediate state
and left the field impossible to leave in some contexts, even though
it was never a valid final value.
Switch both to a QRegularExpressionValidator matching
^[0-9]*\.?[0-9]{0,4}$: "." is a literal character in the pattern, not
locale-dependent, and [0-9] (rather than \d) excludes non-ASCII
digits. This guarantees a value entered this way can always be read
back with QString::toDouble() without locale handling. The check for
which keys are numeric (QETInformation::isNumericInfoKey) is shared
between both call sites; the validator setup itself stays local to
each, since QETInformation intentionally has no Qt Widgets dependency.
Also adds a placeholder ("ex. 80.5") and tooltip explaining the
expected format.
Adds three new elementInformation keys — width, height, depth (in mm)
— alongside the existing manufacturer/manufacturer_reference fields.
These describe the physical dimensions of the device a symbol
represents, set once per element definition.
Values are restricted to plain decimal numbers via a QDoubleValidator
on the information tree's item delegate (fixed-point, "." as decimal
separator via QLocale::c(), independent of the UI language), so a
later consumer can always parse them with toDouble() without
additional sanitization.
GitHub issue #663: the "Informations" tab in the element editor's
properties dialog was only made visible for Simple and Master basetypes
(setTabVisible gate in on_m_base_type_cb_currentIndexChanged), hiding it
entirely for Slave and Terminal Block elements.
This wasn't a data-model limitation: ElementData::m_informations is read
and written identically for every basetype (elementdata.cpp), and
updateTree() already special-cased Terminal as enabled and injected
PLC-specific info rows for PLC Slave elements - that logic was simply
unreachable because the tab itself was hidden for both types. Also
flipped updateTree()'s Slave case from setDisabled to setEnabled so the
tree is actually editable once visible, matching Terminal's existing
behavior.
This lets users attach manufacturer/part-number/reference metadata
directly to Terminal Block and Slave (e.g. multi-part contactor)
elements, as requested in the issue - useful when a Slave's part number
differs from its Master's (e.g. a contactor's auxiliary contact block
vs. its coil).
Not verified: interactive element-editor GUI testing wasn't performed
in this sandbox; verified via clean incremental build only.
ispyisail