Affichage › "Afficher les limites des cases" draws a faint dashed line
at every column and row limit of the folio border, so that zoomed into
the middle of a folio you can see where a cell ends, not only which one
the headers name. Off by default, remembered once set
(diagrameditor/cell_lines).
Drawn by DiagramView::drawBackground(), under every item and only in
the view: printing and export render the Diagram, never the view, so
they cannot pick the lines up. PaletteGraphicsView gains scenePainter()
so a subclass can draw there on the inverted (dark palette) path too.
The lines follow the border's own cell positions, and each direction is
hidden when the folio hides that header.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Info.plist template shipped LSMinimumSystemVersion=12.3.0, but
the CMake build embedded the host SDK's deployment target (minos
26.0 on recent build machines) into the binary's LC_BUILD_VERSION.
Launch Services relies on the binary's minos, not the plist, so it
refused to launch the app on macOS < 26 even though it ran fine
when invoked directly.
- Set CMAKE_OSX_DEPLOYMENT_TARGET=14.0 explicitly in the cmake
configure step, matching the real minimum imposed by the
Homebrew Qt6 toolchain used for this build.
- Sync misc/Info.plist's LSMinimumSystemVersion to 14.0.0, and have
MacQetDeploy_arm64_cmake.sh set it via PlistBuddy at bundle
install time so it can't drift from the build target again.
Reported-by: guillaume.ruivo (forum)
Right-clicking an empty folio offered Paste here, Folio properties and
four row/column actions. Four of six entries change the folio's layout,
which is rarely wanted and easy to hit by mistake, while nothing in the
menu helps draw.
The empty-folio menu now holds the "Ajouter" submenu (text, image,
shapes, terminal strip plan -- the same actions as the Edition menu and
toolbar), then Folio properties, then the row and column actions in a
"Lignes et colonnes" submenu. The selection menu is unchanged.
A submenu whose actions are all disabled is dropped, the same way
disabled actions already are.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
ElementTextsMover::endMovement() returned early when the text had not
moved without clearing m_movement_running, so every later
beginMovement() on that folio was refused. The dragged text still
moves, because it positions itself, but the mover no longer tracks the
drag and builds no undo step for it.
To reproduce: Shift+drag one element text a couple of pixels so it
snaps back where it was, then Shift+drag another text of the element
and press Ctrl+Z. The second text stays where it was dropped; with this
change it goes back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
ElementTextsMover::endMovement() returned early when the text had not
moved without clearing m_movement_running, so every later
beginMovement() on that folio was refused. The dragged text still
moves, because it positions itself, but the mover no longer tracks the
drag and builds no undo step for it.
To reproduce: Shift+drag one element text a couple of pixels so it
snaps back where it was, then Shift+drag another text of the element
and press Ctrl+Z. The second text stays where it was dropped; with this
change it goes back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Drop 1:2.5: on a grid of 10 it steps by 4, which misses 10, so texts on
two elements 10 apart could never line up. Every remaining divisor is a
whole number, which tst_textgrid checks.
The divisor list and the snapping arithmetic move to the header-only
textgrid.h so the toolbar menu, the preferences page and the test share
them. The preferences page gets the same choice under Grille + Clavier;
QETApp::textGridChanged keeps every editor's toolbar button in step.
While element texts are dragged, the status bar names the text grid and
says to release Shift and hold Ctrl for free placement -- Ctrl+Shift
together is the pan shortcut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Texts snapped to the folio grid, so the first drag of an off-grid label
pulled it sideways by up to half a grid step (discussion #1020). Texts
now snap to a fraction of the folio grid, chosen from a "Textes 1:N"
button in the View toolbar and a menu under Affichage: Off, 1:1, 1:2,
1:2.5, 1:5, 1:10. Because the step divides the folio grid, texts on
different elements still line up. Ctrl still places a text freely.
1:1 is the default and matches the previous behaviour. The setting is
stored in QSettings; nothing changes in saved projects.
All five text movers switch together: element texts, text groups,
texts moved with a selection, conductor texts and independent texts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
The popup now also takes a folio position before the cell, the way
cross references and folio reports write it by default (%f-%l%c): 3-B13
offers "Folio 3 (<title>), case B13", and Enter shows that folio and
zooms onto the cell. Case and a leading "p" are ignored, and the
separator is optional: 3-b13, 3b13, P3B13 and p3-b13 all work. A plain
B13 still means the current folio, and P3 alone is still row P,
column 3: a folio always needs a cell after it. A folio position past
the last folio, or a cell outside that folio's border, offers nothing.
The zoom on another folio is queued, so it runs once the tab switch
has been handled. Checked on the ATS example: jumping to 1-C5 from
folio 3 gives the same view, pixel for pixel, as C5 typed on folio 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Affichage > "Garder les en-têtes visibles" adds a bar along the top and
the left of the diagram view that repeats the folio's column numbers and
row letters, aligned with the cells at any zoom, so they stay in sight
when the folio's own headers are scrolled away. Off by default; the
choice is stored as diagrameditor/cell_rulers.
The bars are CellRuler widgets in the view's margins
(setViewportMargins), not scene items, so printing and PDF/PNG/DXF
export never see them, and they paint with the application palette
outside of the dark-palette inversion. They keep a constant thickness;
when cells get narrower than their labels, only every 2nd, 5th, 10th...
label is written. A bar is hidden when the folio hides that header.
Showing or hiding them keeps the centre of the view where it was.
The labels come from BorderCellLabels, now also used by
BorderTitleBlock::draw(), so the bars and the border cannot disagree.
PNG export of all 133 folios of the examples is pixel-identical to
master, with border-columns_0 true and false.
Known limits: changing border-columns_0 repaints the bars at the next
scroll or zoom; the menu toggle updates the views of its own editor
window only, like the grid toggle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Typing a cell reference into the "Atteindre un élément" popup now offers
"Case B13"; Enter zooms the view onto that cell with one cell of margin.
The cell is read the way the border labels it: row letter(s) then column
number, honouring the "columns start at 0" setting and multi-letter rows
(AA, AB...). Cells outside the folio are not offered.
BorderTitleBlock::cellRect() is the reverse of convertPosition(); a
round trip over every cell of a 30x23 folio, under both column-numbering
settings, returned the same cell for all 1380.
When an element is labelled exactly like the cell (K1), the element stays
first so Enter keeps its old meaning; the cell is listed after it.
DiagramView::zoomToRect() re-centres from a queued call: zooming in makes
the scroll bars appear, and the viewport resize that follows is anchored
under the mouse (setResizeAnchor(AnchorUnderMouse)), which otherwise
scrolls the view away from the cell straight after the zoom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Windows reads the device through hid.dll and SetupAPI with ctypes, as
hidapi's Windows backend does: shared, so 3DxWare can keep running, and
dropping the 0 report ID Windows adds, as hidapi does, so the bytes are
the ones QET decodes. Windows does not give out the report descriptor,
so a Windows recording has none; tst_spacemousehid then uses its
fallback layout.
The docstring, printed in full by --help, now has step-by-step
instructions for Linux, macOS and Windows, download included.
Tested: Windows Python 3.12 (embeddable) under Wine 10, against the
virtual uhid 3D mouse: --list finds it, a push sent during `right`
lands in `right`, and a button press and release land in `buttons`,
with the same bytes the Linux path records for the same push. Linux
and the mocked macOS path still pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The recorder only read /dev/hidraw, so it could not run on a Mac. It now
also reads through IOKit via ctypes, using the calls hidapi's mac backend
makes: a shared open (as #1028 does) and the input report callback.
hidapi passes those bytes through unchanged, so a recording is exactly
what QET decodes on macOS. Standard library only, and no sudo.
If 3DxWare holds the device, or Input Monitoring is not granted, it says
which instead of recording nothing. The JSON adds "backend" and
"other_readers" (any 3DxWare or spacenavd process that was running).
Reports that queue up while it waits for Enter are now dropped, so each
step holds only its own movement. The Linux path is otherwise unchanged.
Tested: the Linux path against the virtual uhid device
(tools/hid-capture/fake-spacemouse.py in the docker harness). A stale
report was dropped and the step's own push was kept. The macOS path has
only been run against a mocked IOKit, not on a Mac.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The SpacePilot PRO recording on #599 has a weak `right` step: pushed
too lightly to read above the cap's normal cross-axis noise. A longer
window makes it easier to hold a firm push and gives the decoder more
samples to average over.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Measured on a macOS 15 runner with 3DxWare 10.8.13: an ad-hoc signed
test binary with the hardened runtime loads 3DconnexionClient with or
without the entitlement, so ad-hoc signing does not enforce library
validation and CI cannot prove the entitlement is needed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On macOS, 3DxWare installs a driver extension that takes the 3D mouse
over. With it installed, HidBackend opens the device but receives
nothing, so the mouse did nothing in QElectroTech until 3DxWare was
uninstalled (discussion #599, PR #1028). Most Mac owners of a 3D mouse
have 3DxWare installed.
ConnexionBackend asks 3DxWare for the motion instead, through
3DconnexionClient.framework, as Blender does. SpaceMouseListener tries
it first. When 3DxWare is not installed, or is installed but its driver
is not running, it falls back to HidBackend, so the device works in
both setups. Take-over mode stops 3DxWare's own actions in QET, so the
view does not move twice.
The library is loaded at run time from where 3DxWare installs it:
nothing is linked or bundled, and the build needs no SDK. The few
declarations are written here, from Blender's
GHOST_NDOFManagerCocoa.mm, because 3Dconnexion's SDK headers may not be
redistributed. 3DxWare's axes are y up and z away from the user; they
are mapped to QET's raw USB convention by comparing Blender's 3DxWare
and spacenavd code paths.
The release script signs with the hardened runtime, which refuses a
library another team signed. misc/qelectrotech.entitlements adds
com.apple.security.cs.disable-library-validation (Blender's notarized
build carries the same one), and MacQetDeploy_arm64_cmake.sh now passes
it to all four signings of the app, including the re-sign inside the
DMG.
Tested: tst_spacemouseconnexion runs the backend on every platform
against fakeconnexion, a stand-in library that answers from its own
thread as 3DxWare does: registration, the axis mapping, buttons, other
clients' messages, 3DxWare not installed or not running, deletion
with a message in flight. Flipping an axis sign or dropping the client
check turns it red. realLibrary() loads the real framework when
3DxWare is installed. Linux Qt 6 build with the 3D mouse enabled: all
18 tests pass.
Not tested: on a Mac with a real device. The axis signs and whether
buttons arrive as a bitmask with current 3DxWare are unverified.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After a crash, QElectroTech offers to reopen its recovery files. If one
cannot be read, answering OK crashed the program instead of showing the
"could not open" warning: QETProject(KAutoSaveFile *) takes ownership of
the file and deletes it on failure, and openBackupFiles() then read the
file name from the deleted object to build the warning. Read the name
first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Both issues from the review, preview of empty contact comb slots only:
- Slice the flat label list over the declared poles in drawAsContacts
(terminals per pole from labels.size()/contactCount) instead of a
fixed stride of 2 (3 for a switch) inside drawContact: terminalCount
and contactCount are edited independently, so with 3 poles and the
default terminal count of 2 the fixed stride starved every pole but
the first. Available labels are now distributed across the poles.
- Map changeover labels of a slot to their own position always
(common=stored[0] right, NC=stored[1] bottom-left, NO=stored[2]
top-left, missing entries stay empty) instead of falling back to the
raw stored order, which put the numbers on the wrong contact halves
when the terminal count was below three.
- Element editor: changing the contact count now keeps the terminal
count in step (same terminals per contact, type default 2/3 for
inconsistent data, minimum 3 for a switch), so the mismatch cannot
be created anymore; legacy mismatched data is handled by the new
slicing.
- Drop the now redundant elmt check before is_power_ctc (it already
includes it) - the dead null check from the review.
Diagram::toXml() writes texts, images, shapes and tables in items()
order. The diagram scene uses NoIndex, and Qt's linear index sorts its
item list by pointer address the first time any item is removed from
the scene, which the editor does constantly (selection handles, for
one). From then on the order in the saved file follows memory
addresses, so moving one element reshuffles unrelated blocks and a
version-control diff of the project becomes unreadable.
Write those blocks in stacking order instead, read from a rect query,
which Qt sorts by z and insertion order even with NoIndex. Reloading a
file rebuilds exactly that order, so a resave is stable and the drawing
does not change. Elements and conductors were already sorted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Qt 6 declares the PDF/X namespace (pdfxid) in the XMP metadata of every
PDF it writes, even when the file is not PDF/X. Adobe Acrobat then draws
small text too bold at some zoom levels. Qt only needs the declaration
for PDF/X-4 output, which QElectroTech never asks for.
Blank the declaration out after export, in place with spaces so no
offsets move, in both the export window and the --export-pdf path.
Diagnosis and the Acrobat testing by Alf, bugtracker #340.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
hidapi's macOS backend opens every device with
kIOHIDOptionsTypeSeizeDevice unless told otherwise (hid_init() calls
hid_darwin_set_open_exclusive(1) for backward compatibility). When
3DxWare is running it already holds the SpacePilot/SpaceMouse, so the
seize fails, hid_open_path() returns NULL and HidBackend::scan() keeps
retrying every 3 s without ever finding the device.
Reported in discussion #599: a SpacePilot Pro (046d:c629) is listed by
hid_enumerate() and works in 3DxWare, but has no effect in QET's macOS
build. Enumeration never opens a device, so it did not exercise this.
Guarded on HID_API_VERSION >= 0.12, where the setter first appeared.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The root of a project's embedded collection showed "Projet sans titre"
whenever the project had no title, while the project panel shows the
file name. Fall back to the file name the same way, and only use
"Projet sans titre" for a project that has neither.
The name was also computed once, so changing the project title or saving
it under a new name left the pane stale until the collections were
reloaded. Update it on projectTitleChanged and projectFilePathChanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Installs MSYS2's hidapi and turns on QET_ENABLE_SPACEMOUSE with the
hidapi backend, so the Windows package reads a 3Dconnexion SpaceMouse
directly over USB, with no 3Dconnexion driver (discussion #599).
The existing transitive DLL scan copies libhidapi-0.dll into the package,
and both installers take everything in bin/. Two checks make a silent
loss fail the build instead: CMake only warns when hidapi is missing, so
the exe must link against it, and the DLL must be deployed, or
QElectroTech.exe would not start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
For device owners on Linux: guided movements, with every raw report and
the device's report descriptor saved to one JSON file. Dropped into
tests/qttest/fixtures/spacemouse/, a recording is checked by
tst_spacemousehid against what the user was asked to do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 3D mouse only worked on Linux, through spacenavd. This adds a second
backend that reads the device directly over USB through hidapi, with no
3Dconnexion driver or SDK: the route to Windows and macOS (discussion
#599), and usable on Linux without spacenavd.
SpaceMouseHid decodes the raw reports from the device's own report
descriptor -- where each axis and button sits, its range, absolute or
relative -- so no per-model table is needed, with the classic report
1/2/3 layout as a fallback when the descriptor cannot be read and the
0x1c button list newer devices send. Absolute axes are rescaled to
+-500 exactly as spacenavd does, so both backends give QET the same
values. HidBackend polls from the main thread (fast while moving, slow
when still), emits one sample per poll, and looks for a device every 3 s
so plugging one in or back in needs no restart.
QET_SPACEMOUSE_BACKEND (auto, spnav, hid) picks the backend; auto keeps
libspnav on Linux when it is found and uses hidapi otherwise. hidapi is
found through pkg-config as hidapi-hidraw (Linux) or hidapi (MSYS2,
Homebrew).
A sample arriving in the same millisecond as the previous one now counts
for no time instead of a full period, so a burst of queued samples no
longer moves the view further than the time it covers.
Tested without a device: tst_spacemousehid (descriptor parsing, broken
and hostile descriptors, every report form, recordings from real devices
once they are added to fixtures/spacemouse), and end to end on Linux
through a virtual USB device created with /dev/uhid: the same moves give
byte-identical screenshots through the hidapi and libspnav backends, an
absolute axis is rescaled as spacenavd does, buttons trigger their
bound action, and unplugging and replugging while QET runs (including
with a dialog open that a device button opened) reconnects cleanly.
Not tested on Windows, macOS or real hardware.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ispyisail