Hold the right button on a folio and drag: a ring appears around the
point where the button went down, showing up to eight commands, and the
one in the mouse's direction is highlighted with its name underneath.
Releasing runs it; releasing near the centre cancels. These are
SolidWorks' mouse gestures.
The commands are the shortcut bar's for the selection, placed clockwise
from the top, so customising the bar customises the ring. As with the
context menu, a right press selects what is under the mouse first.
A plain right click still opens the context menu, now on release on
every platform. The view tracks the right button and opens the menu
itself; the platform's own right-click event (sent on press on X11, on
release on Windows) is ignored while gestures are on, so the menu is
never opened twice. The keyboard menu is unchanged.
The view keeps out of the way while a tool or a placement is running,
since a right click cancels or finishes those, and while a text is
being edited. The new General option "Gestes de la souris avec le
bouton droit" (diagrameditor/mouse_gestures, on by default) turns it
off and restores the previous right button exactly.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit a625142f36e619bb4d4f3551b6086f2dd8eabc86)
Enter on a folio runs the last drawing or placing command again, as it
does in SolidWorks: the last tool from the add-item family (text, line,
rectangle, terminal strip plan...) or the last element placed, however
it was placed -- dragged, double-clicked, picked, or from the shortcut
bar.
Enter is handled in DiagramView::keyPressEvent, not bound as a shortcut,
so it keeps working everywhere else: search fields, the collection
tree, dialogs. On the folio it is left alone while a tool is running or
an item has the focus (a text being edited), and with any modifier held.
The same command is in Édition, named after what it will do --
"Répéter : Ajouter une ligne", "Répéter : insérer « Diode »" -- and
registered with ShortcutManager (diagrameditor.repeat_last_command, no
default key), so it can be bound or put on the shortcut bar.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 1e06ce97961ee18734ddaaa9b72b0303a169b9b2)
After a click that selects something on a folio, a small row of commands
appears just above and to the right of the cursor, as the SolidWorks
context toolbar does. It fades as the mouse moves away and is gone past
200 pixels; a click elsewhere, the wheel, a key press or an emptied
selection hide it too. Clicking a command leaves it up, so rotate can be
clicked again.
The commands are the shortcut bar's for that selection -- elements or
conductors -- at most eight, so customising the bar customises this as
well. It is a child of the view's viewport, never a window, and never
takes the focus.
It is not shown after a drag (moving items, a rubber band), while
placing or drawing (Diagram::eventInterfaceIsRunning()), on
a read-only folio, or when switched off with the new General option
"Afficher les commandes près de la sélection" (diagrameditor/
context_toolbar, on by default).
ShortcutBarSettings::contextFor() now decides the context for both the
bar and this toolbar.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 78f3c1a2bc5c3cf1f7beae4bd60aefec20847d6d)
Right-click the shortcut bar, or click the "…" button at its end, and it
turns into a small window holding two lists: the bar's commands, left
to right, and every other command. Drag a command onto the bar, off
it, or to another place on it; a double click moves it to the other
list. Terminé saves and shows the bar again where it was, with the
result; Annuler, Esc or closing the window leaves it as it was.
"Valeurs par défaut" puts back the defaults for this context.
A Qt::Popup closes on a press outside it and holds the mouse grab, so
the bar is re-shown as a Qt::Tool window for the time of the edit.
Only QSettings is written, through ShortcutBarSettings, never the
project's undo stack.
The popup now looks the commands up itself (popUpShortcutBar(pos,
context)) instead of being handed actions, since it has to rebuild
them after an edit. ShortcutBarSettings::availableIds() lists what can
go on the bar, shared with the configuration page. An empty bar still
shows its "…" button, so it can be filled again.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 4145d4bec1d403126b2a6587105aea47092db8a2)
Pressing S on a folio opens the element picker at the cursor with a row
of commands above it, chosen by what is selected, like the SolidWorks
shortcut bar:
nothing selected insert last element, element picker, text, line,
rectangle, terminal strip plan, paste, folio
properties
elements selected rotate, rotate texts, edit, copy, cut, delete
only conductors reset path, edit, delete
Each row is a list of ShortcutManager ids, so any registered command can
go on it and the bar carries no command list of its own. The lists are
in QSettings (diagrameditor/shortcut_bar/<context>); a context the user
has not changed follows the defaults. A disabled command keeps its
place, greyed, so a row looks the same each time. Clicking a button
closes the bar and triggers the action.
A new configuration page, "Barre de raccourcis", edits the three lists:
add, remove and reorder any diagram editor command.
To make that possible:
- ShortcutManager::action(id, owner) returns the action a given window
registered under an id, since each editor window registers its own.
- The add-item actions (text, image, shapes, terminal strip plan) are
registered as diagrameditor.add_<kind>, with no default key. They also
appear in the Shortcuts page and can now be bound.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 53c1e213282b9f7226ca1c09e81703113236bb88)
Insert opens a small picker where the mouse is, with its search field
focused. Type to search the whole collection, Enter to place the best
hit (it is preselected), Up/Down to choose another, Esc to close. The
chosen element goes into the usual placement mode, so it can be placed
several times and repeated with A.
With the field empty the picker shows a palette: the elements of a
folder, as an icon grid. The palette is a folder rather than a setting
or a file format. Subfolders are read in, the 01_/02_ filename prefixes
the shipped collection already uses give the order, and sharing it is
putting it in the company collection. Only the path is stored,
"elementscollection/palette-path", defaulting to the user collection.
It is read each time the picker opens, capped at 60 entries and three
folder levels.
The picker builds no second collection model. It asks the Collections
panel's rankedSearch(), so both give the same results in the same order
and startup is unchanged.
"Insérer un élément…" is in the Édition menu, registered with
ShortcutManager on Insert, which nothing else uses, and disabled with no
folio open or on a read-only project.
Discussion #676.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 01e1e0303b96380e710da8d4bb2300b21d01e938)
The Collections search hid non-matching rows, so the hits stayed spread
through the expanded folders. Searching "diode" against the shipped
collection left five levels of tree open, and the first visible hit was
"Avalanche diode bidirectional".
The same matches are now shown as a flat list that takes the tree's
place while a search is active, best match first:
exact name 1000
name starts with 800
name contains 600, less the match position
info field only 300
less the name length, so "Diode" precedes "Diode Zener bidirectional"
"diode" now gives Diode, diode-tube, Diode bridge, Diodes Module Pilot
Wire, Photodiode. No new index: this ranks what match() already returns
against Qt::UserRole+1, the string built at startup from the name and
every element-info field. An element matching several "+" terms is
listed once, and each row's tooltip is its folder, so similar names can
be told apart.
Double click or Enter on a result places it, as in the tree. Down from
the search field moves into the results, so searching and placing needs
no mouse. Emptying the field brings the tree back.
The query and ranking live in rankedSearch(), which returns hits without
model indexes, so another list can reuse them.
Discussion #676.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
(cherry picked from commit 3d6a280f9608758527ef0ca2de7223a19dfbfa45)
The Info.plist template shipped LSMinimumSystemVersion=12.3.0, but
the CMake build embedded the host SDK's deployment target (minos
26.0 on recent build machines) into the binary's LC_BUILD_VERSION.
Launch Services relies on the binary's minos, not the plist, so it
refused to launch the app on macOS < 26 even though it ran fine
when invoked directly.
- Set CMAKE_OSX_DEPLOYMENT_TARGET=14.0 explicitly in the cmake
configure step, matching the real minimum imposed by the
Homebrew Qt6 toolchain used for this build.
- Sync misc/Info.plist's LSMinimumSystemVersion to 14.0.0, and have
MacQetDeploy_arm64_cmake.sh set it via PlistBuddy at bundle
install time so it can't drift from the build target again.
Reported-by: guillaume.ruivo (forum)
DiagramEventAddElement is already a good placement mode: the element
follows the cursor on the grid, a left click drops it, Space rotates it,
and it stays loaded for a run of the same symbol. Its only caller was
DiagramView::handleElementDrop(), so it could be reached only by
finishing a drag. Double-clicking a symbol in the Collections dock
opened the element editor instead.
- DiagramView::startElementPlacement() is split out of
handleElementDrop(). defaultPlacementPos() uses the cursor when it is
over the view and the centre of the visible area otherwise.
- ElementsCollectionWidget emits insertElementRequested() on double
click, or Enter on the highlighted item. The host decides which view
receives it, so the widget can later be reused outside the editor.
- When there is nowhere to place it (no folio open, read-only project),
the element editor opens, as a double click did before.
- "Insérer le dernier élément" (Édition menu, default key A) places the
last element again. DiagramView reports every placement it starts, so
an element dropped by drag counts too. Macros are not remembered.
A rather than Space: Space rotates the pending element inside placement
mode and is bound three more times in this editor. The key is a
ShortcutManager default and can be changed in the Shortcuts page.
Double click placing is a behaviour change, so it has a preference,
"elementscollection/double-click-inserts" (default true), shown in
Configuration as an opt-out: "Double-cliquer dans la collection ouvre
l'éditeur d'élément au lieu de l'insérer".
Discussions #676 and #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Right-clicking an empty folio offered Paste here, Folio properties and
four row/column actions. Four of six entries change the folio's layout,
which is rarely wanted and easy to hit by mistake, while nothing in the
menu helps draw.
The empty-folio menu now holds the "Ajouter" submenu (text, image,
shapes, terminal strip plan -- the same actions as the Edition menu and
toolbar), then Folio properties, then the row and column actions in a
"Lignes et colonnes" submenu. The selection menu is unchanged.
A submenu whose actions are all disabled is dropped, the same way
disabled actions already are.
Discussion #1033.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
ElementTextsMover::endMovement() returned early when the text had not
moved without clearing m_movement_running, so every later
beginMovement() on that folio was refused. The dragged text still
moves, because it positions itself, but the mover no longer tracks the
drag and builds no undo step for it.
To reproduce: Shift+drag one element text a couple of pixels so it
snaps back where it was, then Shift+drag another text of the element
and press Ctrl+Z. The second text stays where it was dropped; with this
change it goes back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
ElementTextsMover::endMovement() returned early when the text had not
moved without clearing m_movement_running, so every later
beginMovement() on that folio was refused. The dragged text still
moves, because it positions itself, but the mover no longer tracks the
drag and builds no undo step for it.
To reproduce: Shift+drag one element text a couple of pixels so it
snaps back where it was, then Shift+drag another text of the element
and press Ctrl+Z. The second text stays where it was dropped; with this
change it goes back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Drop 1:2.5: on a grid of 10 it steps by 4, which misses 10, so texts on
two elements 10 apart could never line up. Every remaining divisor is a
whole number, which tst_textgrid checks.
The divisor list and the snapping arithmetic move to the header-only
textgrid.h so the toolbar menu, the preferences page and the test share
them. The preferences page gets the same choice under Grille + Clavier;
QETApp::textGridChanged keeps every editor's toolbar button in step.
While element texts are dragged, the status bar names the text grid and
says to release Shift and hold Ctrl for free placement -- Ctrl+Shift
together is the pan shortcut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Texts snapped to the folio grid, so the first drag of an off-grid label
pulled it sideways by up to half a grid step (discussion #1020). Texts
now snap to a fraction of the folio grid, chosen from a "Textes 1:N"
button in the View toolbar and a menu under Affichage: Off, 1:1, 1:2,
1:2.5, 1:5, 1:10. Because the step divides the folio grid, texts on
different elements still line up. Ctrl still places a text freely.
1:1 is the default and matches the previous behaviour. The setting is
stored in QSettings; nothing changes in saved projects.
All five text movers switch together: element texts, text groups,
texts moved with a selection, conductor texts and independent texts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
The popup now also takes a folio position before the cell, the way
cross references and folio reports write it by default (%f-%l%c): 3-B13
offers "Folio 3 (<title>), case B13", and Enter shows that folio and
zooms onto the cell. Case and a leading "p" are ignored, and the
separator is optional: 3-b13, 3b13, P3B13 and p3-b13 all work. A plain
B13 still means the current folio, and P3 alone is still row P,
column 3: a folio always needs a cell after it. A folio position past
the last folio, or a cell outside that folio's border, offers nothing.
The zoom on another folio is queued, so it runs once the tab switch
has been handled. Checked on the ATS example: jumping to 1-C5 from
folio 3 gives the same view, pixel for pixel, as C5 typed on folio 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Affichage > "Garder les en-têtes visibles" adds a bar along the top and
the left of the diagram view that repeats the folio's column numbers and
row letters, aligned with the cells at any zoom, so they stay in sight
when the folio's own headers are scrolled away. Off by default; the
choice is stored as diagrameditor/cell_rulers.
The bars are CellRuler widgets in the view's margins
(setViewportMargins), not scene items, so printing and PDF/PNG/DXF
export never see them, and they paint with the application palette
outside of the dark-palette inversion. They keep a constant thickness;
when cells get narrower than their labels, only every 2nd, 5th, 10th...
label is written. A bar is hidden when the folio hides that header.
Showing or hiding them keeps the centre of the view where it was.
The labels come from BorderCellLabels, now also used by
BorderTitleBlock::draw(), so the bars and the border cannot disagree.
PNG export of all 133 folios of the examples is pixel-identical to
master, with border-columns_0 true and false.
Known limits: changing border-columns_0 repaints the bars at the next
scroll or zoom; the menu toggle updates the views of its own editor
window only, like the grid toggle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Typing a cell reference into the "Atteindre un élément" popup now offers
"Case B13"; Enter zooms the view onto that cell with one cell of margin.
The cell is read the way the border labels it: row letter(s) then column
number, honouring the "columns start at 0" setting and multi-letter rows
(AA, AB...). Cells outside the folio are not offered.
BorderTitleBlock::cellRect() is the reverse of convertPosition(); a
round trip over every cell of a 30x23 folio, under both column-numbering
settings, returned the same cell for all 1380.
When an element is labelled exactly like the cell (K1), the element stays
first so Enter keeps its old meaning; the cell is listed after it.
DiagramView::zoomToRect() re-centres from a queued call: zooming in makes
the scroll bars appear, and the viewport resize that follows is anchored
under the mouse (setResizeAnchor(AnchorUnderMouse)), which otherwise
scrolls the view away from the cell straight after the zoom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Windows reads the device through hid.dll and SetupAPI with ctypes, as
hidapi's Windows backend does: shared, so 3DxWare can keep running, and
dropping the 0 report ID Windows adds, as hidapi does, so the bytes are
the ones QET decodes. Windows does not give out the report descriptor,
so a Windows recording has none; tst_spacemousehid then uses its
fallback layout.
The docstring, printed in full by --help, now has step-by-step
instructions for Linux, macOS and Windows, download included.
Tested: Windows Python 3.12 (embeddable) under Wine 10, against the
virtual uhid 3D mouse: --list finds it, a push sent during `right`
lands in `right`, and a button press and release land in `buttons`,
with the same bytes the Linux path records for the same push. Linux
and the mocked macOS path still pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The recorder only read /dev/hidraw, so it could not run on a Mac. It now
also reads through IOKit via ctypes, using the calls hidapi's mac backend
makes: a shared open (as #1028 does) and the input report callback.
hidapi passes those bytes through unchanged, so a recording is exactly
what QET decodes on macOS. Standard library only, and no sudo.
If 3DxWare holds the device, or Input Monitoring is not granted, it says
which instead of recording nothing. The JSON adds "backend" and
"other_readers" (any 3DxWare or spacenavd process that was running).
Reports that queue up while it waits for Enter are now dropped, so each
step holds only its own movement. The Linux path is otherwise unchanged.
Tested: the Linux path against the virtual uhid device
(tools/hid-capture/fake-spacemouse.py in the docker harness). A stale
report was dropped and the step's own push was kept. The macOS path has
only been run against a mocked IOKit, not on a Mac.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The SpacePilot PRO recording on #599 has a weak `right` step: pushed
too lightly to read above the cap's normal cross-axis noise. A longer
window makes it easier to hold a firm push and gives the decoder more
samples to average over.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Measured on a macOS 15 runner with 3DxWare 10.8.13: an ad-hoc signed
test binary with the hardened runtime loads 3DconnexionClient with or
without the entitlement, so ad-hoc signing does not enforce library
validation and CI cannot prove the entitlement is needed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On macOS, 3DxWare installs a driver extension that takes the 3D mouse
over. With it installed, HidBackend opens the device but receives
nothing, so the mouse did nothing in QElectroTech until 3DxWare was
uninstalled (discussion #599, PR #1028). Most Mac owners of a 3D mouse
have 3DxWare installed.
ConnexionBackend asks 3DxWare for the motion instead, through
3DconnexionClient.framework, as Blender does. SpaceMouseListener tries
it first. When 3DxWare is not installed, or is installed but its driver
is not running, it falls back to HidBackend, so the device works in
both setups. Take-over mode stops 3DxWare's own actions in QET, so the
view does not move twice.
The library is loaded at run time from where 3DxWare installs it:
nothing is linked or bundled, and the build needs no SDK. The few
declarations are written here, from Blender's
GHOST_NDOFManagerCocoa.mm, because 3Dconnexion's SDK headers may not be
redistributed. 3DxWare's axes are y up and z away from the user; they
are mapped to QET's raw USB convention by comparing Blender's 3DxWare
and spacenavd code paths.
The release script signs with the hardened runtime, which refuses a
library another team signed. misc/qelectrotech.entitlements adds
com.apple.security.cs.disable-library-validation (Blender's notarized
build carries the same one), and MacQetDeploy_arm64_cmake.sh now passes
it to all four signings of the app, including the re-sign inside the
DMG.
Tested: tst_spacemouseconnexion runs the backend on every platform
against fakeconnexion, a stand-in library that answers from its own
thread as 3DxWare does: registration, the axis mapping, buttons, other
clients' messages, 3DxWare not installed or not running, deletion
with a message in flight. Flipping an axis sign or dropping the client
check turns it red. realLibrary() loads the real framework when
3DxWare is installed. Linux Qt 6 build with the 3D mouse enabled: all
18 tests pass.
Not tested: on a Mac with a real device. The axis signs and whether
buttons arrive as a bitmask with current 3DxWare are unverified.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After a crash, QElectroTech offers to reopen its recovery files. If one
cannot be read, answering OK crashed the program instead of showing the
"could not open" warning: QETProject(KAutoSaveFile *) takes ownership of
the file and deletes it on failure, and openBackupFiles() then read the
file name from the deleted object to build the warning. Read the name
first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Both issues from the review, preview of empty contact comb slots only:
- Slice the flat label list over the declared poles in drawAsContacts
(terminals per pole from labels.size()/contactCount) instead of a
fixed stride of 2 (3 for a switch) inside drawContact: terminalCount
and contactCount are edited independently, so with 3 poles and the
default terminal count of 2 the fixed stride starved every pole but
the first. Available labels are now distributed across the poles.
- Map changeover labels of a slot to their own position always
(common=stored[0] right, NC=stored[1] bottom-left, NO=stored[2]
top-left, missing entries stay empty) instead of falling back to the
raw stored order, which put the numbers on the wrong contact halves
when the terminal count was below three.
- Element editor: changing the contact count now keeps the terminal
count in step (same terminals per contact, type default 2/3 for
inconsistent data, minimum 3 for a switch), so the mismatch cannot
be created anymore; legacy mismatched data is handled by the new
slicing.
- Drop the now redundant elmt check before is_power_ctc (it already
includes it) - the dead null check from the review.
Diagram::toXml() writes texts, images, shapes and tables in items()
order. The diagram scene uses NoIndex, and Qt's linear index sorts its
item list by pointer address the first time any item is removed from
the scene, which the editor does constantly (selection handles, for
one). From then on the order in the saved file follows memory
addresses, so moving one element reshuffles unrelated blocks and a
version-control diff of the project becomes unreadable.
Write those blocks in stacking order instead, read from a rect query,
which Qt sorts by z and insertion order even with NoIndex. Reloading a
file rebuilds exactly that order, so a resave is stable and the drawing
does not change. Elements and conductors were already sorted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
Qt 6 declares the PDF/X namespace (pdfxid) in the XMP metadata of every
PDF it writes, even when the file is not PDF/X. Adobe Acrobat then draws
small text too bold at some zoom levels. Qt only needs the declaration
for PDF/X-4 output, which QElectroTech never asks for.
Blank the declaration out after export, in place with spaces so no
offsets move, in both the export window and the --export-pdf path.
Diagnosis and the Acrobat testing by Alf, bugtracker #340.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G2d2Zi8BfrYRPX88zhaoFG
hidapi's macOS backend opens every device with
kIOHIDOptionsTypeSeizeDevice unless told otherwise (hid_init() calls
hid_darwin_set_open_exclusive(1) for backward compatibility). When
3DxWare is running it already holds the SpacePilot/SpaceMouse, so the
seize fails, hid_open_path() returns NULL and HidBackend::scan() keeps
retrying every 3 s without ever finding the device.
Reported in discussion #599: a SpacePilot Pro (046d:c629) is listed by
hid_enumerate() and works in 3DxWare, but has no effect in QET's macOS
build. Enumeration never opens a device, so it did not exercise this.
Guarded on HID_API_VERSION >= 0.12, where the setter first appeared.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The root of a project's embedded collection showed "Projet sans titre"
whenever the project had no title, while the project panel shows the
file name. Fall back to the file name the same way, and only use
"Projet sans titre" for a project that has neither.
The name was also computed once, so changing the project title or saving
it under a new name left the pane stale until the collections were
reloaded. Update it on projectTitleChanged and projectFilePathChanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ispyisail