#1533 stopped the panel shrinking to its title bar when the selection
had nothing to edit, so that it would keep the height the user gave it
(#1439). Users want the room back for the Collections and Auto numbering
panels while nothing is selected (#1566).
The panel's layout is back to QLayout::SetMaximumSize, so the empty
panel shrinks as before. Just before its last editor goes, the panel
keeps the heights of every docked panel in its area; when an editor
comes back it gives them back with QMainWindow::resizeDocks, the call a
separator drag makes. Giving only this panel its height back fell 35 px
short in the test: the neighbours had been split again from their size
hints and gave up only part of the room.
Test: tst_selectionpanelheight now checks, twice over, that the empty
panel shrinks and that selecting an element again brings back the height
the user gave it. Without the restore the panel comes back at 470 px
instead of 560; on master the empty panel does not shrink.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
QETZ-DB-FIRST stage 2b-1. The numbering schemes of wires, symbols,
folios and cables, and the settings saved with them (the scheme in use
of each kind, freezing new labels, auto-break, the cable axis and
question), get three tables of the project database: numbering_scheme,
numbering_part (one row per part, in order) and numbering_setting.
QETProject writes them when it reads its file and after each change of
its numbering, from every setter; nothing reads them yet.
The save writes the numbering through writeNumberingXml(), the code it
had moved out of writeDefaultPropertiesXml(), so the same writer can
take the rows once the save moves to them (2b-2).
QET_CHECK_NUMBERING_ROWS=1 writes the numbering from the project and
from the rows at each save and says whether the two differ.
tst_elementautonumids::numberingRowsFollowEveryChange checks it after
each of 23 changes; with one setter not writing the rows, one save
differs and it fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A double click on a linked folio report showed the other end's folio
and highlighted it, but left the mouse pointer where it was, on every
platform, while only Wayland forbids a program to move it. On Windows,
X11 and macOS the pointer is now put on the end jumped to, once the
folio shown has its size (next turn of the event loop), so that a
second double click jumps back. On Wayland the highlight alone still
shows where the jump landed.
The pointing hand over a report's label text also stayed after a
click: mousePressEvent() puts the text colour back, and the cursor was
only unset with the colour in hoverLeaveEvent(). It is now always
unset when the mouse leaves the text.
Feedback on a real plan: zooming in on the end jumped to was too much.
A jump now shows the target's folio whole, as a page (the view's fit),
selects the target and shades it and its texts blue for three seconds,
so that the eye finds the label too. One function, Element::jumpTo(),
serves the double click on the arrow and on the text.
The mouse pointer is not moved onto the target: Wayland does not let a
program move the pointer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A linked folio report now shows a pointing hand under the mouse, on its
arrow as well as on the text that shows its label (which already turned
blue), and a double click on the arrow goes to the other end, as a
double click on the text did. Before, a double click on the arrow opened
the report's properties, which stay reachable from the context menu and
the properties panel.
The end jumped to is highlighted for two seconds, with the same blue as
the hover highlight but independent of it: the hover highlight is
cleared as soon as the mouse leaves the end jumped from, so on the same
folio the user saw nothing mark where the jump landed.
The text of a linked slave that shows its master's label gets the same
blue and hand, since a double click on it already jumped to the master.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
element_nomenclature_view gave an element's own plant and location only,
which are empty unless typed into every element. A project structured by
its folios (=plant +location on the title block, %M / %LM) therefore
showed no place in the BOM, nomenclature tables and queries, although the
folio says where each device is -- the way EPLAN builds the device tag
from the page structure.
The view now falls back to the folio's plant and location when the
element has none of its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every formula evaluation constructed a QSettings, although only element
formulas read it (border-columns_0, for %c). Constructing QSettings is
costly, on Windows a registry lookup, and conductor labels are evaluated
in bulk: Conductor::refreshText() runs for every wire of a folio when it
is built, and for every wire of every built folio when the project or a
title block changes.
Debug build, 40 folios with 4,280 numbered wires:
- refreshText() of every wire: 1,136-1,264 ms before, 203-208 ms after
- opening the project (database fill): 2.24-2.48 s before, 1.46-1.59 s after
- building 39 lazy folios: 15.0-15.3 s before, 12.3-12.5 s after
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new option in the Display menu, off by default and kept in the
settings: two thin lines cross the whole folio, inside its border,
through the grid point under the mouse, so that one sees at a glance
whether symbols and terminals are in line, also while dragging them.
They are drawn by the view in drawForeground(), on screen only: no item
is added to the folio, so nothing of them is saved, exported or
printed. Only the strips the lines leave and enter are repainted, and
they go when the mouse leaves the view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While no 3D mouse is plugged in, which for most users is always, the
hidapi backend looks for one every 3 seconds for as long as
QElectroTech runs. It asked hidapi for every HID device,
hid_enumerate(0, 0), and on Windows hidapi reads the serial number,
manufacturer and product strings of each device that matches what it
is asked for from the device itself. So every mouse, keyboard, headset
and webcam on the PC was asked for its names every 3 seconds, on the
GUI thread. Issue #1553 reports the pointer moving by itself on Windows
since the first package with this backend; nothing else in that package
talks to devices. SDL 2.0.9 polled the same way and saw freezes and a
keyboard that kept re-initialising (libsdl-org/SDL#3071).
The scan now asks for 3Dconnexion's vendor id, and for each 3D mouse
made under Logitech's id by its product id, since most other mice and
keyboards carry Logitech's id too. That is twelve hidapi calls instead
of one, but a device that does not match is no longer asked for its
names. On Linux and macOS hidapi takes the names from the system, and
one call is cheaper than twelve (on Linux, median of 200: 5 ms against
36 ms), so the scan there is unchanged.
Where the scan is filtered, a Logitech-id device that is not one of the
eleven 3D mice on the list is no longer found, even if it reports
itself as a multi-axis controller. 3Dconnexion's own mice and keyboards,
such as the CadMouse, are still asked: their vendor id is asked for as
a whole, so that new 3D mice are found without a list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add an automatic import which groups the free terminals of a project
by the part of their label before the first colon ("X1:2" goes to the
strip "X1"), creates the strips missing and sorts the terminals in
natural order, as one undoable step.
The import runs when the terminal block manager opens on a project and
can be run again from a new toolbar action. It only adds : the strips
already known keep their terminals and their order, and terminals
without label are left free.
A project opened before the element collection panel's first load is
queued until the load starts; one opened during a load goes into the
model being loaded. ElementsCollectionWidget::removeProject() only
removed the project from the model already shown, so a project closed
in either window stayed in the collection, and the next reload read the
freed project (crash in XmlElementCollection::root()).
removeProject() now also takes the project out of the queue and out of
the model being loaded. That model waits for its loading threads, which
read the project, and drops the project's items from the list applied
when the loading ends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Closing a modified project and choosing Discard left the project in the
project tree. The panel removed its item, but the project still emits
projectInformationsChanged() while it is torn down (setModified()), and
GenericPanel answered by adding the project back, with items for its
sheets. Once the project was freed, a click on one of those sheets
called diagram->showMe() on a freed Diagram: SIGSEGV in
QObjectPrivate::maybeSignalConnected(), the backtrace reported on the
forum (topic 3215).
The panel now stops listening to a project when it is closed, to its
sheets and to its embedded title block collection, before removing its
item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A .qetz's folios kept as they were (not built since it was opened) had
their parts written first, then those of the folios built: saving the same
.qetz again with another folio built gave a zip with every part the same
and the parts in another order. Write them in the order of the folios,
the names of the parts kept still taken first so a folio built cannot
take one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The .qetz leaves out of its folios what QElectroTech computes when it
builds them (format 4): a symbol's terminal list and information texts,
a wire's description of its ends. A symbol whose definition the project
does not hold is never built, so none of it came back: through a .qetz,
the symbols and wires kept by the previous commit lost their terminal
lists, texts and end labels. QetContainer::dropComputed() now leaves a
symbol whose definition is not in the project's collection
(embeddedDefinitions()), and the wires ending on it, as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening a project dropped, with only a debug line, a symbol whose
definition could not be found (missing from the project's collection and
from the library) and every wire on it; and a wire whose terminal could
not be matched, after the symbol's definition was redrawn. The next save
wrote the project without them. One save of a forum upload whose
collection was incomplete kept 1 of 219 symbols and none of its 299 wires.
A folio now keeps what it could not load as it was read
(Diagram::m_kept_symbols, m_kept_wires) and writes it back when it is
saved whole (Diagram::writeKept()):
- a symbol, its terminals given ids after those of the folio's symbols;
- a wire, an end found written from its terminal as Conductor::toXml()
does, an end not found as the symbol and terminal uuids it names; for a
wire saved by legacy ids, the terminal's uuid derived from where it was
saved (Element::savedTerminalUuid(), out of matchMovedTerminals()), so
it joins again once the definition has it there. A wire whose ends
cannot be read, or an end naming no terminal of the file, is kept so
that it joins nothing.
A symbol kept counts as waiting (projectDataBase::waitingSymbols()), so a
partner keeps its link to it. The open warning now lists the symbols not
loaded too, and says both are kept.
Once the definition is back, the symbol and its wires are built again:
741.qet with one transistor definition removed (8 symbols, 33 wires on
them) saves all 67 wires, and with the definition put back opens with
all 65 symbols and 67 wires, the same folio as before.
tst_resaveunchanged::unloadableItemsKept: fixtures/coil_contact_wired.qet
(coil, linked contact, two wires; built with the script API) with the
coil's definition removed, or the contact's terminals moved and given new
uuids: both symbols, wires and links saved, a second save the same, and
the coil's definition put back gives the undamaged project's symbols and
wires. Fails on master (1 symbol; 0 wires).
FINDINGS F127, F128.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A symbol built after opening (lazy folios) links to the partners its
link rows name, and to the symbols whose rows name it; its file's list
only adds what the rows miss. The rows keep a partner on a folio not
built until it is built, in its saved place, so a symbol no longer keeps
a list of its own: the list read from the file is dropped once opening
has filled the database. pendingLinks(), waitingLinks(),
keepsSavedLinks(), linksToSave() and QETProject::waitingLinkTargets()
go; the callers that asked a symbol for its waiting partners ask the
database (waitingPartners()).
When its links change, a symbol's rows are written from its built
partners and the waiting partners its rows held, in their order
(rowsToWrite()), so a full rewrite of the table keeps them too.
A symbol built alone as a partner on a folio not built
(Diagram::buildSymbols()) counts as built: its rows are kept, it is not
waiting (waitingSymbols(), waitingPartners()), so saving does not build
its folio, and removing it does not remove the rows naming it. A row
naming a placed symbol that has not linked yet (its folio being built)
is kept too. At opening the database holds no link until its fill
(forgetLinks()); the symbols read their files' lists until then, and the
fill takes their order: a symbol's own rows, its list, then the rows
naming it. The symbols waiting on folios not built are cached and
updated as folios are built.
QET_CHECK_LINK_ROWS now checks the rows against the links: each built
partner in its order, no other row but to a folio not built.
tst_resaveunchanged::undoKeepsLinksToUnbuiltFolios: m_000 opened with
lazy folios, a contact, its folio or its coil's folio (not built)
removed, then undone: every link saved as before.
QETZ-DB-FIRST stage 2a-3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a HiDPI screen QIcon::pixmap() returns each requested size at the
screen's ratio, so the sizes handed to the tray no longer matched
16 ... 256. Requested at 1.0, as ProjectFileGP in qeticons.cpp does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The folio title was put into the formula before %c, %l, %prefix, the
wire variables, the title block and project variables and the
sequences, so a title such as "Schema %c" had them replaced inside it.
It is replaced after all of them now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
inheritedProperties() cleared the text of a conductor held by a cable,
on the premise that CableManager writes the core label into it. It
writes it into m_cable only (Conductor::setCableReference()); the text
is the potential's real wire number. Clearing it lost a typed number on
the new wire and made distinctProperties() see a choice between ""
and the number where the potentials agreed. The text is now cleared only
when it repeats the core label.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The level spinbox of the terminal strip editor allowed stages up to 6
while the strip drawing handles at most 4 stages (0 to 3), so a stage
entered there was simply not drawn. Cap the spinbox at 3 and keep the
editor consistent with the drawing and the level columns.
Opening the terminal block manager builds the folios not built yet (lazy
folios). This is done in one go without running the event loop, so the
window system said the opening message was "not responding".
- QETProject::setFolioBuildObserver(): a function called after each folio
built by buildFolios(), with the number of folios built and to build.
- The manager uses it to show "Reading folio n of N..." with a real
progress bar, and runs the event loop (without the user input) between
two folios, so the window system keeps getting answers.
- The autosave skips its turn while folios are being built, since the
event loop can now run then.
- The opening message only has a title bar: nothing to minimize, maximize
or close.
One pass of the event loop after show() was not enough: the message box
was not painted yet when the long work started (seen on Wayland), only
the busy cursor was visible.
Wait for the window of the message to be exposed by the window system
(500 ms at most), then paint it before building the manager.
Opening the terminal block manager reads every terminal of the project,
and builds the folios not built yet (lazy folios): on a big project it can
take a while, and the user could think that nothing happens.
TerminalStripEditorWindow::instance(), used by the menu action and by a
double click on a terminal strip of a folio, now shows a busy message
("Opening the terminal block manager...") and a wait cursor while the
window is built or switched to another project. Moved from the header to
the .cpp file.
The redraw on change was connected in setTerminalStrip() only, used when
an item is read from the project. An item added with the "Add terminal
strip" dialog is built with TerminalStripItem(strip), which did not
connect: it was not redrawn after the terminal strip editor was applied,
until the project was reopened.
Both constructors now go through connectStrip().
A spare (reserved) terminal is a terminal of a strip which is drawn on no
folio. RealTerminal already foresaw it ("a terminal set by user but not
present on any folio") but every terminal needed an element.
- RealTerminal::createSpare(): a terminal without element, with its own
data (label, type, function, led, informations: section, width, catalog
terminal, color, manufacturer...). Saved in the strip:
<real_terminal spare_uuid="..." type="..." function="..."><informations>
Older versions ignore these terminals.
- TerminalStrip::insertSpareTerminals() / insertTerminals(): insert at a
position of the strip. Undoable commands AddSpareTerminalsCommand and
ChangeSpareTerminalDataCommand.
- Terminal strip editor: "Add spare terminals..." button. The terminals
are inserted after the selected terminal (at the end if none), numbered
from its label ("X1:12" -> "X1:13", "X1:14", leading zeros kept), with
its properties if asked. The labels can be changed or removed in the
table, like the other cells; the Xref column shows "Spare". Moving a
spare terminal to the independent terminals removes it (undoable).
- Nomenclature: the spare terminals are in the new spare_terminal table,
added to element_nomenclature_view (UNION ALL, same columns), after the
folios, in the order of their strip. exclude_from_bom is honoured.
- The modified cells of the editor model are kept by real terminal, not by
element, since a spare terminal has none.
TerminalStripItem was connected to nothing: after applying the terminal
strip editor (width, catalog terminal, color, type...), undo or redo, the
strip drawn on the folio kept its old drawing until something else made
the scene repaint, and its bounding rect was not updated when the width of
the terminals changed.
- TerminalStrip::dataChanged() is emitted when the data of the strip is
set, and when the data of the element of one of its terminals changes
(Element::setElementData(), Element::setElementInformations()).
- TerminalStripItem connects to dataChanged(), orderChanged(),
bridgeChanged() and bridgeColorChanged() of its strip, and updates its
geometry and redraws itself.
The glob "????-??-?? ??-??-??" contains the trigraph "??-", which GCC
reports with -Wtrigraphs (8 warnings). The pattern is now written with
"\?" escapes, in one place; it is the same string.
The realistic styles drew every terminal of a strip with the clamp of the
layout (RealisticScrew or RealisticPushIn), whatever terminal was chosen:
a Phoenix Contact ST (spring) was drawn with screws in a screw layout.
Each entry of the terminal catalog now has its clamp: screw (Phoenix
Contact UT, Weidmüller WDU, ABB Entrelec M, Legrand Viking 3), spring
(Phoenix Contact ST) or push-in (WAGO TOPJOB S). A terminal chosen in the
catalog is drawn with its own clamp, the spring-cage ones like the push-in
ones; the clamp of the layout is kept for the other terminals, so a strip
mixing screw and spring terminals is drawn as it is.
The manufacturer chosen to filter the terminals of the Width column is
stored in the data of the terminal strip (information "manufacturer" of
terminal_strip_data, written only when set), and selected again when the
strip is shown in the editor. Each strip keeps its own manufacturer.
Older versions ignore this information.
TerminalStripEditor::apply() now starts from the current data of the strip
instead of a new TerminalStripData: the uuid of the strip was replaced by
a new one at each apply, and the new information would have been lost.
ispyisail