Two fixes in the placement tool Ctrl+V starts.
Paste appeared on top of the original, not under the cursor. 55c2c0df9
added the placement tool precisely so the copy would not land invisibly
on top of what was copied, but 53a0f07ca then warped the pointer to the
group's grid-snapped origin -- which is the original's position -- so the
copy reappeared exactly over the original until the mouse was moved. The
start_pos the caller computes from the cursor was left unread: three
mentions in the file, all declaration or comment. Reported on #913,
where it reads as Ctrl+V pasting in place.
Move the group to the cursor instead of the cursor to the group. Both put
the copy under the pointer; only one of them takes the pointer away from
where the user put it. start_pos is honoured, the items are translated
once at construction, their conductors re-routed before anything is
drawn, and the movement baseline is set there too rather than waiting for
the first mouse move.
That made the baseline sentinel matter, so it is now the
m_baseline_captured flag the header already declared and nothing used,
rather than m_initial_cursor.isNull() -- which cannot tell "not set yet"
from a baseline that is legitimately scene (0,0).
Separately: one Ctrl+V killed the folio's right-click menu for the rest
of the session. init() sets Qt::NoContextMenu so a right click cancels
the placement instead of opening a menu over it, and nothing ever set it
back, taking "Coller ici", "Collage multiple", the folio properties and
add/remove column/row with it. Every other DiagramEvent* class restores
the policy in its destructor; this one did not. Confirmed against an
unmodified master build: the menu opens before a paste and not after one.
It matters here because "use the right-click menu instead" is the answer
people are given when Ctrl+V does not place where they wanted.
Verified on a built binary driven through a virtual X display, against
examples/741.qet and convertisseur.qet:
- the pointer does not move across Ctrl+V (1300,870 before and after;
on master it jumps to the original at 798,455), and the copy is under it
- a multi-element selection keeps its layout and its conductors re-route
- Escape and right-click both cancel, leaving nothing behind and nothing
on the undo stack; click and Return both commit; one undo removes the
whole paste and redo restores it
- with the pointer outside the viewport the copy lands at the viewport
centre, visible, and follows correctly once the mouse enters
- pasting into a different folio from the one copied from works
- the context menu opens before a paste, after a cancelled one, and after
a committed one, with "Coller ici" present
ctest 9/9.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Save and restore the state of m_component_info_cb, m_fit_in_page_cb,
and m_use_full_page_cb via QSettings, in addition to the existing
ExportProperties-based checkboxes (border, titleblock, terminals, etc.)
- Add savePrintProperties() to persist all checkbox states after
print/export under the "print/default" settings prefix
- Remove unused QPrinter(HighResolution) local variable in launchDialog()
that caused an unnecessary ~2s CUPS round-trip on Linux
Fix multiple issues introduced by commit 55c2c0df9 (interactive paste):
Paste placement (diagrameventaddpaste):
- Items now load at their original XML coordinates instead of being
snapped to the cursor position, preventing jumps on initial placement
- Use delta-based movement: record the actual grid-snapped cursor
position on first mouseMoveEvent as baseline, then compute
grid-snapped deltas from there
- Bypass Diagram::snapToGrid() in moveTo() to avoid Ctrl modifier
causing pixel-snapping instead of grid-snapping
- Remove moveTo() from mouseReleaseEvent to prevent a final jump
on click
- Warp cursor to group bounding rect origin for visual feedback
Paste command (diagramcommands):
- Always clear PLC slave data (type, address, function, comment,
cross-ref, label, TC, T1-T4) on paste regardless of the
erase-label-on-copy user preference
- Block alignment (m_block_alignment / blockAlignmentUpdate) before
setElementInformations() for both slaves and non-slaves, preventing
finishAlignment() from shifting right/center-aligned text items
- Clear non-UserText items directly after setElementInformations()
for slaves as a safety net
draw-bezier-curves only exists as SVG in the qet icon theme; on
Debian/Ubuntu the SVG icon engine lives in qt6-svg-plugins, which
--no-install-recommends leaves out. breeze-icon-theme is not needed:
the test uses the qet theme compiled into the binary.
The ubuntu:26.04 container has no icon theme, so
QIcon::fromTheme() returns null icons and tst_qeticons fails
on first CI run. Install breeze-icon-theme so the test runs
against a real theme, as it does on developer machines.
When duplicating a diagram page, copied slave elements retain stale
data from the source: labels, descriptions, link references, and PLC
master information (type, address, function, comment, cross-ref, timer
values) remain in the copies.
Fix by adding clearPendingLinks() to Element to prevent copies from
linking back to source elements via stale UUIDs, and by cleaning up
copied element data after fromXml():
- Slaves always lose their label, formula, comment, location, and
PLC master data, since their text comes from a master element which
is not available on the copy. The displayed text on slave elements
is cleared directly via setPlainText(), but UserText items (free
text typed by the user) are preserved.
- For PLC slaves, setElementInformations() is called without
m_block_alignment so that elementInfoChanged() can run
finishAlignment() to correctly adjust text positions for the
cleared content.
- Non-slave elements respect the existing erase-label-on-copy
preference, same as PasteDiagramCommand::redo().
- Conductor labels are also reset when erase-label-on-copy is
active, matching PasteDiagramCommand::redo() (issue #413).
- Text alignment is preserved by wrapping setElementInformations()
with m_block_alignment for non-slave elements, same as
Element::fromXml().
QET had no icon theme: the 446 entries of the icon table and the 116
iconsets in .ui files each named a resource path, so an icon could only
ever be one file, and a variant for another palette or a vector source
had nowhere to go (GitHub #466, #690, #870). This adds the theme layout
without changing a single pixel; a dark variant comes in a follow-up.
The theme "qet" follows the freedesktop layout Qt's icon loader
understands. misc/make_icon_themes.py generates ico/icon-themes.qrc,
which aliases the existing ico/<size>/<name>.png files into
themes/qet/<size>/<name>.png, and ico/themes/qet/index.theme. No file
moves. The four table entries that paired a 16 pixel file with a 22
pixel file of another name (ConductorSettings, DiagramAdd,
DiagramDelete, DialogInformation) get the 22 pixel file aliased under
the 16 pixel name.
QETApp::initIconTheme() registers the theme before initIcons() and makes
it current on every platform, so a desktop icon theme cannot replace
QET's icons. Icons are then looked up by name: QIcon::fromTheme() in
qeticons.cpp and in the few places that built a QIcon from a resource
path directly, and theme="..." on the iconsets in .ui files, with the
resource path kept as fallback. Flags, color swatches, application and
MIME icons stay on their paths.
One entry does not go through the theme. The elements panel draws the
project root with ProjectFileGP in the 50 pixel slot it reserves for
element previews, and the name "project" also carries the 128 pixel
file the configuration dialog uses. On a 2x display Qt's loader picks
that file for a 50 pixel request and fills the slot. ProjectFileGP
loads the 16 and 22 pixel files directly, as before.
tests/qttest/tst_qeticons: every name in the theme resolves, the four
aliases resolve at 22 pixels, a Fusion tool button shows its icon at
3:1 with disabled weaker than enabled, and the project root icon stays
at 22 pixels or less when asked for 50 at 2x while the configuration
dialog still gets its 128 pixel file. The rendering helpers shared
with tst_qetpalette moved to tests/qttest/inkcontrast.h.
QETApp::checkBackupFiles() only reached checkCrashDump() when there was
nothing to recover:
if (stale_files.isEmpty()) {
checkCrashDump();
return;
}
A crash with a project open always leaves a stale KAutoSaveFile, so on the
next launch the recovery prompt won every time and the dump sat on disk
unoffered -- the report was unreachable in exactly the case it is most
wanted. Reported by ChuckNr11 as a side note in #898: "the report appeared
only once despite there being 10 or more crashes". It appears on the runs
that happen to have nothing to recover.
Discussion #644 step 5 asks that the two prompts never show at the same
time, which this keeps: the recovery prompt is answered first, then the
report. The recovery half moves into offerBackupFiles() so both paths fall
through to the same place.
Verified under Xvfb, from a real crash state (SIGABRT with a project open,
leaving both a stale file and a 5.4 KB crash_dump.log): the recovery prompt
appears, and dismissing it now brings up "Rapport de plantage" carrying the
version, git SHA, OS, Qt version and the log ring. Before this change the
report never appeared -- that half rests on the four lines above rather
than on a captured before/after, since re-creating the crash state for a
clean baseline run kept consuming it.
Not addressed: the dump is a single fixed path opened O_TRUNC, so
consecutive crashes still overwrite one another.
ctest 8/8.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
a) paste
- conductor does not move
- pressing escape does not abort
- pressing anything during the process crashes the program instead of aborting
b) similar issue with the escape not working fixed for graphics items, texxt fields (and probably others)
Refs discussion #886: a saved-report manager built on custom SQL and
nomenclature.json. Most of what was asked for already existed --
Projet > Exporter au format CSV already builds/saves/reuses named
SELECT queries via ElementQueryWidget and nomenclature.json, and
Projet > Ajouter une nomenclature already inserts one into a folio.
This fills the three real gaps.
- projectDataBase::isReadOnlySelect() rejects anything that isn't a
single SELECT/WITH statement. Checked in newQuery() itself, the one
choke point every query path already goes through -- including a
query loaded from a saved nomenclature/summary table's <query>
element on project open, not just the dialog's own custom-SQL box.
ElementQueryWidget shows the same check live as you type, and
BOMExportDialog surfaces it before running or exporting anything.
- BOMExportDialog gains a Preview button + table (QSqlQueryModel),
so a report can be checked on screen before committing to a CSV file.
- ElementQueryWidget gains Importer.../Exporter... buttons that
read/write nomenclature.json's saved reports as a JSON file, so a
report can be handed to a colleague or another install. Import asks
before overwriting a locally-saved report of the same name.
Verified: Qt 6.10.2, builds clean, ctest 8/8. Drove the real dialog
through Xvfb: typed "DROP TABLE element" into the custom-SQL box and
got the inline warning immediately, then confirmed Preview also
refuses it with a "Requête refusée" dialog rather than running it.
Preview against the real default query returned live column headers
and a row. Export opens a save dialog without crashing.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Another exception: one non-converted code path in projectprintwindow.cpp to be followed-up.
One issue found in the Qt6 code path of diagramview.cpp which has been fixed.
Addresses scorpio810's review of PR #890 (bugtracker #734):
- The four cas "3"/"4" bridge-skip guards now compare qRound()ed
coordinates, matching how the bridge coordinate itself is computed --
an exact != would miss a pair already grid-equal after rounding but
off by a sub-pixel remainder, and still route a degenerate bridge for
it. Verified no behavior change on the shipped corpus: per-file
self-retrace counts are identical before/after (every coordinate
there already lands exactly on-grid).
- Added tests/qttest/tst_conductorselfretrace.cpp, fixture
qet_bug_repro_resaved.qet (the report's own canonical reproduction):
exports it via the built binary's --export-svg and asserts no
conductor path is self-retracing. Confirmed it actually catches the
regression, not just passes vacuously -- reverted conductor.cpp to
master and reran: fails, 1 self-retracing path found.
Not changed in code: the cas "4" descending-branch dead-code note (kept
for symmetry, as already agreed) and the schema_unifilaire_voltaique2.qet
trade-off (flagged for the reviewer's own visual check).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
update_translations dropped 3 .ui files' <location> entries this run
(graphicstablepropertieseditor.ui, inditextpropertieswidget.ui,
projectdbmodelpropertieswidget.ui), marking ~38-44 existing translations
per language as vanished -- lrelease drops those, so merging would have
lost real, in-use translations in about twenty languages. Cause not
yet identified.
scorpio810 will run lupdate separately after merge, so the 37 new
scripting strings get picked up without this loss and without
conflicting with translation work in progress.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ispyisail