Snap enable DQET_ENABLE_SPACEMOUSE=ON

3D mouse (SpaceMouse/SpacePilot) pan/zoom via libspnav — Linux phase (discussion #599)

.gitattributes

@@ -1 +0,0 @@
-*.qch filter=lfs diff=lfs merge=lfs -text

.github/workflows/auto-doxygen.yml

@@ -1,67 +0,0 @@
-name: Auto-build doxygen docs
-on:
-  push:
-    tags:
-       - '**'
-   
-  
-  
-jobs:  
-  doxygen:
-    permissions:
-       contents: write    
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: 'recursive'
-        show-progress: ''
-    - name: Setup and run doxygen
-      run: sudo apt update && sudo apt install doxygen graphviz qhelpgenerator-qt5 -y
-    - name: Set up Git LFS
-      run: |
-          git lfs install
-          git lfs track "*.qch"  
-    - name: Run doxygen
-      run: doxygen Doxyfile
-    - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v8
-      with:
-        token: ${{ secrets.MR_TOKEN }}
-        commit-message: update QCH file
-        committer: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
-        title: Update QCH Help file
-        body: |
-         - Updating QT Help file following commit ${{ github.sha }}.
-         - Auto-generated by [create-pull-request][1]
-
-         [1]: https://github.com/peter-evans/create-pull-request
-        branch: update-qch
-        labels: | 
-          qch
-          cicd
-        delete-branch: true
-        add-paths: doc/*.qch
-    - uses: actions/upload-pages-artifact@v3
-      with: 
-       path: ${{ github.workspace }}/doc/html/
-  deploy:
-    # Add a dependency to the build job
-    needs: doxygen
-
-    # Grant GITHUB_TOKEN the permissions required to make a Pages deployment
-    permissions:
-      pages: write      # to deploy to Pages
-      id-token: write   # to verify the deployment originates from an appropriate source
-
-    # Deploy to the github-pages environment
-    environment:
-      name: github-pages
-      url: ${{ steps.deployment.outputs.page_url }}
-
-    # Specify runner + deployment step
-    runs-on: ubuntu-latest
-    steps:
-      - name: Deploy to GitHub Pages
-        id: deployment
-        uses: actions/deploy-pages@v4 # or specific "vX.X.X" version tag for this action

.github/workflows/linux-build.yml

@@ -28,7 +28,7 @@ jobs:
           DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
             ca-certificates build-essential cmake ninja-build git pkg-config \
             qt6-base-dev qt6-base-private-dev qt6-tools-dev qt6-tools-dev-tools \
-            libqt6svg6-dev libqt6sql6-sqlite libsqlite3-dev libcups2-dev \
+            libqt6svg6-dev libqt6sql6-sqlite libcups2-dev libsqlite3-dev \
             libxkbcommon-x11-0 \
             xvfb openbox xdotool x11-utils
           # extra-cmake-modules and the KF6 libraries are installed rather than
@@ -53,7 +53,9 @@ jobs:
           git config --global --add safe.directory "$GITHUB_WORKSPACE"
           cmake -B build -G Ninja \
             -DCMAKE_BUILD_TYPE=Debug \
-            -DQT_VERSION_MAJOR=6
+            -DQT_VERSION_MAJOR=6 \
+            -DCMAKE_POLICY_VERSION_MINIMUM=3.5 \
+            -DQET_EXPORT_PROJECT_DB=ON 
 
       - name: Build
         run: cmake --build build --parallel $(nproc)

.github/workflows/windows-msi.yml

@@ -59,17 +59,41 @@ jobs:
 
       # ----------------------------------------------------------------
       # 2. Download the portable artifact for this flavor
+      #
+      #    Wrapped in nick-fields/retry: actions/download-artifact@v8 has
+      #    shown repeated "Artifact download failed after 5 retries"
+      #    failures on this cross-workflow download (via run-id) — not a
+      #    real content/digest problem, just flaky Azure blob delivery.
+      #    Two separate occurrences observed within days of each other
+      #    (different artifact IDs/digests, same failure signature), each
+      #    one enough to fail build-msi outright and block the rest of the
+      #    pipeline. Retrying the whole download 3x is cheap insurance.
+      #    Switched to `gh run download` here because nick-fields/retry
+      #    can only retry a shell command, not re-invoke a `uses:` step.
       # ----------------------------------------------------------------
       - name: Download portable artifact
-        uses: actions/download-artifact@v8
+        uses: nick-fields/retry@v3
         with:
-          name: ${{ matrix.portable_artifact }}
-          path: artifact\files
-          # workflow_run => use the triggering run's ID
-          # workflow_dispatch => use input run_id if provided, otherwise current run
-          run-id: ${{ github.event.workflow_run.id || github.event.inputs.run_id || github.run_id }}
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-          repository: ${{ github.repository }}
+          timeout_minutes: 10
+          max_attempts: 3
+          retry_wait_seconds: 30
+          shell: pwsh
+          command: |
+            if (Test-Path "artifact\files") { Remove-Item -Recurse -Force "artifact\files" }
+            New-Item -ItemType Directory -Force -Path "artifact\files" | Out-Null
+
+            $runId = "${{ github.event.workflow_run.id || github.event.inputs.run_id || github.run_id }}"
+            gh run download $runId `
+              --repo "${{ github.repository }}" `
+              --name "${{ matrix.portable_artifact }}" `
+              --dir "artifact\files"
+
+            if ($LASTEXITCODE -ne 0) {
+              Write-Error "gh run download failed (exit $LASTEXITCODE)"
+              exit $LASTEXITCODE
+            }
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
       # ----------------------------------------------------------------
       # 3. Extract version
@@ -336,7 +360,13 @@ jobs:
           if-no-files-found: error
 
       - name: Delete old nightly .msi asset
-        if: always()
+        # Only run if a new MSI actually exists in dist/ — otherwise the old
+        # (still working) nightly .msi would be deleted without anything to
+        # replace it, leaving the nightly release with no MSI at all until
+        # the next successful build (see windows-msi-pipeline notes,
+        # run 35694391567: an upstream artifact-download failure meant
+        # dist\*.msi never existed for that run).
+        if: always() && hashFiles('dist/*.msi') != ''
         env:
           GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
           REPO: ${{ github.repository }}
@@ -381,7 +411,20 @@ jobs:
   deploy-pages:
     needs: build-msi
     runs-on: ubuntu-latest
-    if: always() && needs.build-msi.result == 'success'
+    # Regenerate the page whenever the MSI job actually ran (success OR
+    # packaging/signing failure) — not only on full success.
+    # generate-page.py queries the published assets on the "nightly"
+    # release itself (line 407: `gh release view nightly --json assets`),
+    # so it already handles a missing MSI natively (empty MSI_NAME -> no
+    # MSI button on the page). The page only needs the exe/zip already
+    # published by windows-build.yml, independent of the MSI's fate.
+    # Only "skipped"/"cancelled" are excluded: if build-msi never ran at
+    # all (e.g. Windows Build itself failed), there is nothing new to
+    # publish and regenerating the page would be pointless.
+    if: >
+      always() &&
+      needs.build-msi.result != 'skipped' &&
+      needs.build-msi.result != 'cancelled'
     permissions:
       contents: write
       pages: write

.gitignore

@@ -1,5 +1,7 @@
 *.snap
 .flatpak-builder
+__pycache__/
+*.pyc
 # Qt build output
 *.user
 # doxygen Doxyfile output
@@ -7,12 +9,4 @@ doc/*
 !doc/QElectroTech.qch
 QElectroTech.tag
 !doc/doc-utils
-lang/*.qm
-
-# -- IDE settings/intermediate files --
-# zed
-.zed
-.cache
-
-# VS Code
-.vscode
+ui_*.h

CMakeLists.txt

@@ -36,6 +36,7 @@ include(cmake/git_update_submodules.cmake)
 include(cmake/git_last_commit_sha.cmake)
 include(cmake/fetch_singleapplication.cmake)
 include(cmake/fetch_pugixml.cmake)
+include(cmake/find_spacemouse.cmake)
 include(cmake/qet_compilation_vars.cmake)
 
 set(CMAKE_INCLUDE_CURRENT_DIR ON)
@@ -113,7 +114,9 @@ if(Backtrace_FOUND)
     include_directories(${Backtrace_INCLUDE_DIRS})
     add_compile_definitions(QET_CRASH_BACKTRACE)
 else()
-    message(STATUS "backtrace() not available: crash dumps will carry the log ring without a backtrace")
+    message(STATUS
+        "backtrace() not available: crash dumps will carry the log ring "
+        "without a backtrace")
 endif()
 
 find_package(SQLite3 REQUIRED)
@@ -167,6 +170,12 @@ else()
     )
 endif()
 
+if(QET_SPACEMOUSE_BACKEND_SPNAV_ENABLED)
+    list(APPEND QET_SPACEMOUSE_LIBRARIES PkgConfig::SPNAV)
+endif()
+# A future Windows/macOS (3DxWare) backend would list.APPEND its own SDK
+# libraries here, behind its own *_ENABLED guard, alongside this one.
+
 if(APPLE)
     # CFBundleIdentifier must not be empty. CMake's default Info.plist
     # template fills it from MACOSX_BUNDLE_GUI_IDENTIFIER; with that unset
@@ -285,6 +294,7 @@ target_link_libraries(
     SQLite3::SQLite3
     ${KF_PRIVATE_LIBRARIES}
     ${QET_PRIVATE_LIBRARIES}
+    ${QET_SPACEMOUSE_LIBRARIES}
 )
 
 target_include_directories(
@@ -316,7 +326,6 @@ target_include_directories(
     ${QET_DIR}/sources/NameList
     ${QET_DIR}/sources/NameList/ui
     ${QET_DIR}/sources/utils
-    ${QET_DIR}/pugixml/src
     ${QET_DIR}/sources/dataBase
     ${QET_DIR}/sources/dataBase/ui
     ${QET_DIR}/sources/factory/ui

INSTALL.md

@@ -271,6 +271,22 @@ mkdir build && cd build
 cmake .. -G Ninja -DBUILD_WITH_KF=OFF -DCMAKE_BUILD_TYPE=Release
 cmake --build .
 ```
+
+If `libbacktrace` is installed in your MSYS2 environment, pass the following
+cached CMake variables when configuring. They are only necessary in that
+case, because `FindBacktrace` needs them to locate the library:
+
+```sh
+cmake .. -G Ninja -DBUILD_WITH_KF=OFF -DCMAKE_BUILD_TYPE=Release \
+    -DBacktrace_INCLUDE_DIR=/c/msys64/clang64/include \
+    -DBacktrace_LIBRARY=/c/msys64/clang64/lib/libbacktrace.a
+```
+
+`Backtrace_INCLUDE_DIR` must point to the directory containing `backtrace.h`,
+and `Backtrace_LIBRARY` to the `libbacktrace.a` file. The paths above are the
+usual locations for the MSYS2 `clang64` environment; adjust them if your
+installation uses a different prefix.
+
 (KF6 isn't packaged in MSYS2 either, hence `-DBUILD_WITH_KF=OFF` again.)
 
 Using the Qt Online Installer's bundled MinGW kit instead: point

build-aux/snap/snapcraft.yaml

@@ -50,6 +50,7 @@ parts:
       - python3-lxml
       - python3-tk
       - libtk8.6
+      - libspnav0
 
   kde-sdk-setup:
     plugin: nil
@@ -92,6 +93,7 @@ parts:
       # runs FindCups at configure time and fails without the CUPS headers.
       # Build-time only: nothing from it is staged into the snap.
       - libcups2-dev
+      - libspnav-dev
     override-build: |
       displayed_version=$(cat sources/qetversion.cpp | grep "return QVersionNumber{"| head -n 1| awk -F "{" '{ print $2 }' | awk -F "}" '{ print $1 }' | sed -e 's/,/./g' -e 's/ //g')
       snap_version="${displayed_version}-g$(git rev-parse --short=8 HEAD)"
@@ -106,7 +108,8 @@ parts:
         -DBUILD_KF=OFF \
         -DPACKAGE_TESTS=OFF \
         -DBUILD_PUGIXML=ON \
-        -DQET_EXPORT_PROJECT_DB=ON
+        -DQET_EXPORT_PROJECT_DB=ON \
+        -DQET_ENABLE_SPACEMOUSE=ON
       ninja -C build -j${CRAFT_PARALLEL_BUILD_COUNT}
       DESTDIR="$CRAFT_PART_INSTALL" ninja -C build install
     override-stage: |

cmake/developer_options.cmake

@@ -31,7 +31,7 @@ add_definitions(-DQT_MESSAGELOGCONTEXT)
 # In order to do so, uncomment the following line.
 #add_definitions(-DTODO_LIST)
 
-# Build with KDE Frameworks. 
+# Build with KDE Frameworks.
 option(BUILD_WITH_KF "Build with KDE Frameworks" ON)
 
 # Precompiled headers for the Qt umbrella headers.
@@ -47,3 +47,8 @@ option(BUILD_WITH_KF "Build with KDE Frameworks" ON)
 # compile for everyone else. Leaving it off keeps CI and contributors on the
 # strict behaviour, and only developers who opt in trade that for the speed.
 option(QET_ENABLE_PCH "Use precompiled headers (developer build speed; may mask missing #includes)" OFF)
+
+# Phase 1 (Linux, libspnav) of discussion #599: 3Dconnexion SpaceMouse/
+# SpacePilot pan/zoom support. Off by default -- see cmake/find_spacemouse.cmake
+# for what happens when it is on but libspnav isn't found.
+option(QET_ENABLE_SPACEMOUSE "Build with 3Dconnexion/libspnav 3D mouse support for pan/zoom (Linux, requires libspnav-dev and spacenavd)" OFF)

cmake/fetch_kdeaddons.cmake

@@ -23,8 +23,31 @@ if(BUILD_WITH_KF)
 
   if(BUILD_KF)
 
-    if(NOT DEFINED KF_GIT_TAG)
-      # this is a more or less random version, taken as an conservative approach
+    # v6.10.0 is a more or less random version, taken as an conservative
+    # approach. Pinned to the commits v6.10.0 points at, not to the tags
+    # themselves; see the note in fetch_pugixml.cmake. Each module lives in its
+    # own repository, so the same v6.10.0 release is a different commit in
+    # each.
+    #
+    # KDE uses annotated tags, so "git ls-remote <repo> 'refs/tags/v6.10.0*'"
+    # prints two hashes per module: refs/tags/v6.10.0 is the tag object (the
+    # tagger, the date and the tag message) and refs/tags/v6.10.0^{} is the
+    # commit that object points at. The hashes below are the "^{}" ones, i.e.
+    # the commits. Lightweight tags, such as pugixml's v1.15 and
+    # SingleApplication's v3.2.0, have no tag object and print only the
+    # commit line.
+    set(KF_ECM_GIT_COMMIT            7dd28cc56c339c3f8fb356f7c53c0e8f61433d81) # v6.10.0
+    set(KF_KCOREADDONS_GIT_COMMIT    c569f974dab24b4784ad186a3db4b76b2fa36612) # v6.10.0
+    set(KF_KWIDGETSADDONS_GIT_COMMIT 1abbed8a280d6626c59fb197f2c4667d2b1e7445) # v6.10.0
+
+    if(DEFINED KF_GIT_TAG)
+      # Explicit override: -DKF_GIT_TAG=<ref> selects one ref for all three
+      # modules, unpinned, exactly as it did before.
+      set(KF_ECM_GIT_COMMIT            ${KF_GIT_TAG})
+      set(KF_KCOREADDONS_GIT_COMMIT    ${KF_GIT_TAG})
+      set(KF_KWIDGETSADDONS_GIT_COMMIT ${KF_GIT_TAG})
+    else()
+      # Keep KF_GIT_TAG defined: define_definitions.cmake reports it.
       set(KF_GIT_TAG v6.10.0)
     endif()
     # using a function in order to limit the scope of the variables
@@ -53,19 +76,19 @@ if(BUILD_WITH_KF)
       FetchContent_Declare(
         ecm
         GIT_REPOSITORY https://invent.kde.org/frameworks/extra-cmake-modules.git
-        GIT_TAG        ${KF_GIT_TAG})
+        GIT_TAG        ${KF_ECM_GIT_COMMIT})
       FetchContent_MakeAvailable(ecm)
 
       FetchContent_Declare(
         kcoreaddons
         GIT_REPOSITORY https://invent.kde.org/frameworks/kcoreaddons.git
-        GIT_TAG        ${KF_GIT_TAG})
+        GIT_TAG        ${KF_KCOREADDONS_GIT_COMMIT})
       FetchContent_MakeAvailable(kcoreaddons)
 
       FetchContent_Declare(
         kwidgetsaddons
         GIT_REPOSITORY https://invent.kde.org/frameworks/kwidgetsaddons.git
-        GIT_TAG        ${KF_GIT_TAG})
+        GIT_TAG        ${KF_KWIDGETSADDONS_GIT_COMMIT})
       FetchContent_MakeAvailable(kwidgetsaddons)
     endfunction()
     qet_make_kf_available()

cmake/fetch_pugixml.cmake

@@ -22,10 +22,51 @@ option(BUILD_PUGIXML "Build pugixml library, use system one otherwise" YES)
 
 if(BUILD_PUGIXML)
 
+  # Pinned to the commit v1.15 points at, not to the tag itself.
+  #
+  # A git tag is only a named pointer to a commit, and anyone with push access
+  # to the upstream repository can move it (git push --force) to any other
+  # commit. FetchContent fetches whatever the tag points at when the build
+  # runs, so if a maintainer account or CI token is compromised, the attacker
+  # can retarget a well-known release tag to malicious code: every fresh build
+  # of QElectroTech then compiles it, while nothing changes in this repository
+  # and the tag name still looks correct. A commit hash cannot be moved, because
+  # it is derived from the content: different code always has a different hash.
+  #
+  # This attack has been used in the wild:
+  # - March 2025, tj-actions/changed-files (CVE-2025-30066): tags v1 through
+  #   v45.0.7 were retargeted to a commit that dumped CI secrets into build
+  #   logs, affecting more than 23,000 repositories.
+  # - March 2026, aquasecurity/trivy-action (CVE-2026-33634): 76 of 77
+  #   version tags were force-pushed to a credential stealer and stayed
+  #   malicious for about 12 hours.
+  # Both were GitHub Actions rather than CMake dependencies, but the mechanism
+  # is the same one FetchContent relies on here: resolving a git tag at build
+  # time.
+  #
+  # To upgrade, look up the commit the new tag points at with
+  # git ls-remote <repo> 'refs/tags/<tag>*', check that it is the release you
+  # expect, and update both the hash and the trailing tag comment.
+  #
+  # How many lines that prints depends on which of the two kinds of tag
+  # upstream created:
+  # - A lightweight tag is nothing but a ref pointing straight at the commit,
+  #   so ls-remote prints a single line, "refs/tags/<tag>", and its hash is
+  #   the commit to pin. pugixml tags this way, which is why the v1.15 hash
+  #   below is what "git ls-remote ... refs/tags/v1.15" reports directly;
+  #   SingleApplication (v3.2.0) does the same.
+  # - An annotated tag is a git object in its own right, carrying a tagger,
+  #   a date, a message and optionally a GPG signature, and pointing at the
+  #   commit. ls-remote then prints two lines: "refs/tags/<tag>" is the tag
+  #   object and "refs/tags/<tag>^{}" is that object dereferenced, i.e. the
+  #   commit. The KDE Frameworks modules tag this way, so for them it is the
+  #   "^{}" hash that belongs in the pin; the other hash identifies the tag
+  #   object itself, which is not the source revision and changes whenever
+  #   upstream re-creates the tag, even over the very same commit.
   FetchContent_Declare(
     pugixml
     GIT_REPOSITORY https://github.com/zeux/pugixml.git
-    GIT_TAG        v1.15)
+    GIT_TAG        ee86beb30e4973f5feffe3ce63bfa4fbadf72f38) # v1.15
   set(PUGIXML_INSTALL OFF CACHE INTERNAL "")
   FetchContent_MakeAvailable(pugixml)
 else()

cmake/fetch_singleapplication.cmake

@@ -31,9 +31,15 @@ if(EXISTS "${CMAKE_SOURCE_DIR}/SingleApplication/CMakeLists.txt")
   set(FETCHCONTENT_SOURCE_DIR_SINGLEAPPLICATION "${CMAKE_SOURCE_DIR}/SingleApplication")
 endif()
 
+# Pinned to the commit v3.2.0 points at, not to the tag itself; see the note in
+# fetch_pugixml.cmake. v3.2.0 is a lightweight tag, a ref pointing straight at
+# the commit, so "git ls-remote <repo> refs/tags/v3.2.0" prints that commit and
+# nothing else. An annotated tag, as KDE uses in fetch_kdeaddons.cmake, would
+# print the tag object under refs/tags/v3.2.0 as well, with the commit on the
+# refs/tags/v3.2.0^{} line.
 FetchContent_Declare(
   SingleApplication
   GIT_REPOSITORY https://github.com/itay-grudev/SingleApplication.git
-  GIT_TAG        v3.2.0)
+  GIT_TAG        aede311d28d20179216c5419b581087be2a8409f) # v3.2.0
 set(QT_DEFAULT_MAJOR_VERSION 6)
 FetchContent_MakeAvailable(SingleApplication)

cmake/find_spacemouse.cmake

@@ -0,0 +1,63 @@
+# Copyright 2006 The QElectroTech Team
+# This file is part of QElectroTech.
+#
+# QElectroTech is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# QElectroTech is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with QElectroTech. If not, see <http://www.gnu.org/licenses/>.
+
+message(" - find_spacemouse")
+
+# QET_ENABLE_SPACEMOUSE (cmake/developer_options.cmake) is off by default,
+# so none of this runs, and the default build is entirely unaffected: no new
+# dependency, no new source files, no new symbols.
+#
+# When it is on, the platform decides which backend (if any) is available --
+# see sources/spacemouse/spacemousebackend.h for what a backend is. Only one
+# exists today: SpnavBackend, Linux, via libspnav. A Windows/macOS backend
+# would need 3Dconnexion's proprietary 3DxWare SDK and is not implemented
+# (see discussion #599's own phase split); until it is, turning this option
+# on there downgrades cleanly with a warning rather than failing configure.
+set(QET_SPACEMOUSE_ENABLED FALSE)
+set(QET_SPACEMOUSE_BACKEND_SPNAV_ENABLED FALSE)
+
+if(QET_ENABLE_SPACEMOUSE)
+    if(UNIX AND NOT APPLE)
+        # libspnav is looked for via its pkg-config file (present on every
+        # distro package of it this was checked against: Debian/Ubuntu's
+        # libspnav-dev ships /usr/share/pkgconfig/spnav.pc). Not found does
+        # not hard-fail the whole configure -- it downgrades the option back
+        # to off with a clear message, so a developer who doesn't have the
+        # library installed still gets a normal build instead of a configure
+        # error for an opt-in feature they didn't ask to block on.
+        find_package(PkgConfig)
+        if(PkgConfig_FOUND)
+            pkg_check_modules(SPNAV IMPORTED_TARGET spnav)
+        endif()
+
+        if(SPNAV_FOUND)
+            set(QET_SPACEMOUSE_ENABLED TRUE)
+            set(QET_SPACEMOUSE_BACKEND_SPNAV_ENABLED TRUE)
+            add_definitions(-DQET_SPACEMOUSE_SUPPORT)
+            add_definitions(-DQET_SPACEMOUSE_BACKEND_SPNAV)
+            message("QET_ENABLE_SPACEMOUSE      ON  (backend: libspnav ${SPNAV_VERSION})")
+        else()
+            message(WARNING "QET_ENABLE_SPACEMOUSE is ON but libspnav was not found via pkg-config "
+                             "(install libspnav-dev, or the equivalent for your distribution) -- "
+                             "building WITHOUT 3D mouse support.")
+        endif()
+    else()
+        message(WARNING "QET_ENABLE_SPACEMOUSE is ON but no 3D mouse backend is implemented yet "
+                         "for this platform (only Linux/libspnav exists today -- see "
+                         "https://github.com/qelectrotech/qelectrotech-source-mirror/discussions/599) "
+                         "-- building WITHOUT 3D mouse support.")
+    endif()
+endif()

cmake/paths_compilation_installation.cmake

@@ -62,7 +62,9 @@ if(WIN32)
   # puts the .qm files (see build-aux/windows/QElectroTech.wxs and the
   # windows-build workflow), and what the shortcuts pass as --lang-dir.
   set(QET_LANG_PATH               "lang/")
+  set(QET_EXAMPLES_PATH           "examples/")
   set(QET_LICENSE_PATH            "./")
+  set(QET_ICONS_PATH              "icons/hicolor/")
   # Liste des ressources Windows
 #RC_FILE = qelectrotech.rc
 endif()

cmake/qet_compilation_vars.cmake

@@ -297,6 +297,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/autoNum/numerotationcontextcommands.h
   ${QET_DIR}/sources/autoNum/numerotationcontext.cpp
   ${QET_DIR}/sources/autoNum/numerotationcontext.h
+  ${QET_DIR}/sources/autoNum/renumberelementscommand.cpp
+  ${QET_DIR}/sources/autoNum/renumberelementscommand.h
   ${QET_DIR}/sources/autoNum/ui/autonumberingdockwidget.cpp
   ${QET_DIR}/sources/autoNum/ui/autonumberingdockwidget.h
   ${QET_DIR}/sources/autoNum/ui/autonumberingmanagementw.cpp
@@ -307,11 +309,15 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/autoNum/ui/formulaautonumberingw.h
   ${QET_DIR}/sources/autoNum/ui/numparteditorw.cpp
   ${QET_DIR}/sources/autoNum/ui/numparteditorw.h
+  ${QET_DIR}/sources/autoNum/ui/renumberelementsdialog.cpp
+  ${QET_DIR}/sources/autoNum/ui/renumberelementsdialog.h
   ${QET_DIR}/sources/autoNum/ui/selectautonumw.cpp
   ${QET_DIR}/sources/autoNum/ui/selectautonumw.h
 
   ${QET_DIR}/sources/dataBase/projectdatabase.cpp
   ${QET_DIR}/sources/dataBase/projectdatabase.h
+  ${QET_DIR}/sources/dataBase/sqlreadonly.cpp
+  ${QET_DIR}/sources/dataBase/sqlreadonly.h
 
   ${QET_DIR}/sources/dataBase/ui/elementquerywidget.cpp
   ${QET_DIR}/sources/dataBase/ui/elementquerywidget.h
@@ -507,10 +513,6 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/PropertiesEditor/propertieseditorwidget.cpp
   ${QET_DIR}/sources/PropertiesEditor/propertieseditorwidget.h
 
-  ${QET_DIR}/pugixml/src/pugiconfig.hpp
-  ${QET_DIR}/pugixml/src/pugixml.cpp
-  ${QET_DIR}/pugixml/src/pugixml.hpp
-
   ${QET_DIR}/sources/qetgraphicsitem/conductor.cpp
   ${QET_DIR}/sources/qetgraphicsitem/conductor.h
   ${QET_DIR}/sources/qetgraphicsitem/conductortextitem.cpp
@@ -707,6 +709,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/ui/conductorpropertiesdialog.h
   ${QET_DIR}/sources/ui/conductorcolortoolbutton.cpp
   ${QET_DIR}/sources/ui/conductorcolortoolbutton.h
+  ${QET_DIR}/sources/ui/diagrambgcolorbutton.cpp
+  ${QET_DIR}/sources/ui/diagrambgcolorbutton.h
   ${QET_DIR}/sources/ui/conductorpropertieswidget.cpp
   ${QET_DIR}/sources/ui/conductorpropertieswidget.h
   ${QET_DIR}/sources/ui/configsaveloaderwidget.cpp
@@ -723,6 +727,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/ui/backupdialog.h
   ${QET_DIR}/sources/ui/dialogwaiting.cpp
   ${QET_DIR}/sources/ui/dialogwaiting.h
+  ${QET_DIR}/sources/ui/duplicateoffsetdialog.cpp
+  ${QET_DIR}/sources/ui/duplicateoffsetdialog.h
   ${QET_DIR}/sources/ui/dynamicelementtextitemeditor.cpp
   ${QET_DIR}/sources/ui/dynamicelementtextitemeditor.h
   ${QET_DIR}/sources/ui/dynamicelementtextmodel.cpp
@@ -869,6 +875,25 @@ list(APPEND QET_SRC_FILES
   ${QET_DIR}/sources/scripting/qetscripting.h
 )
 
+if(QET_SPACEMOUSE_ENABLED)
+  list(APPEND QET_SRC_FILES
+    ${QET_DIR}/sources/spacemouse/spacemousebackend.h
+    ${QET_DIR}/sources/spacemouse/spacemousebuttonmap.cpp
+    ${QET_DIR}/sources/spacemouse/spacemousebuttonmap.h
+    ${QET_DIR}/sources/spacemouse/spacemouselistener.cpp
+    ${QET_DIR}/sources/spacemouse/spacemouselistener.h
+    ${QET_DIR}/sources/ui/configpage/spacemouseconfigpage.cpp
+    ${QET_DIR}/sources/ui/configpage/spacemouseconfigpage.h
+  )
+endif()
+
+if(QET_SPACEMOUSE_BACKEND_SPNAV_ENABLED)
+  list(APPEND QET_SRC_FILES
+    ${QET_DIR}/sources/spacemouse/spnavbackend.cpp
+    ${QET_DIR}/sources/spacemouse/spnavbackend.h
+  )
+endif()
+
 set(TS_FILES
   ${QET_DIR}/lang/qet_ar.ts
   ${QET_DIR}/lang/qet_ca.ts

ico/128x128/configure-shortcuts.svg

@@ -0,0 +1,29 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 128 128" width="128" height="128">
+  <!-- keyboard body with a lighter top edge -->
+  <rect x="6" y="30" width="116" height="68" rx="8" fill="#31363b"/>
+  <rect x="6" y="30" width="116" height="34" rx="8" fill="#4d4d4d"/>
+  <rect x="6" y="46" width="116" height="18" fill="#31363b"/>
+  <!-- key rows -->
+  <g fill="#eff0f1">
+    <rect x="14" y="38" width="8" height="8" rx="1.5"/><rect x="24" y="38" width="8" height="8" rx="1.5"/>
+    <rect x="34" y="38" width="8" height="8" rx="1.5"/><rect x="44" y="38" width="8" height="8" rx="1.5"/>
+    <rect x="54" y="38" width="8" height="8" rx="1.5"/><rect x="64" y="38" width="8" height="8" rx="1.5"/>
+    <rect x="74" y="38" width="8" height="8" rx="1.5"/><rect x="84" y="38" width="8" height="8" rx="1.5"/>
+    <rect x="94" y="38" width="8" height="8" rx="1.5"/><rect x="104" y="38" width="10" height="8" rx="1.5"/>
+    <rect x="14" y="50" width="12" height="8" rx="1.5"/><rect x="28" y="50" width="8" height="8" rx="1.5"/>
+    <rect x="38" y="50" width="8" height="8" rx="1.5"/><rect x="48" y="50" width="8" height="8" rx="1.5"/>
+    <rect x="58" y="50" width="8" height="8" rx="1.5"/><rect x="68" y="50" width="8" height="8" rx="1.5"/>
+    <rect x="78" y="50" width="8" height="8" rx="1.5"/><rect x="88" y="50" width="8" height="8" rx="1.5"/>
+    <rect x="98" y="50" width="16" height="8" rx="1.5"/>
+    <rect x="14" y="62" width="16" height="8" rx="1.5"/><rect x="32" y="62" width="8" height="8" rx="1.5"/>
+    <rect x="42" y="62" width="8" height="8" rx="1.5"/><rect x="52" y="62" width="8" height="8" rx="1.5"/>
+    <rect x="62" y="62" width="8" height="8" rx="1.5"/><rect x="72" y="62" width="8" height="8" rx="1.5"/>
+    <rect x="82" y="62" width="8" height="8" rx="1.5"/><rect x="92" y="62" width="22" height="8" rx="1.5"/>
+    <rect x="14" y="74" width="10" height="8" rx="1.5"/><rect x="26" y="74" width="10" height="8" rx="1.5"/>
+    <rect x="38" y="74" width="52" height="8" rx="1.5"/>
+    <rect x="92" y="74" width="10" height="8" rx="1.5"/><rect x="104" y="74" width="10" height="8" rx="1.5"/>
+  </g>
+  <!-- the two keys of a shortcut, pressed -->
+  <rect x="14" y="62" width="16" height="8" rx="1.5" fill="#3daee9"/>
+  <rect x="42" y="62" width="8" height="8" rx="1.5" fill="#3daee9"/>
+</svg>

ico/128x128/terminalstrip.svg

@@ -0,0 +1,48 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 128 128" width="128" height="128">
+  <!-- DIN rail -->
+  <rect x="6" y="86" width="116" height="18" rx="3" fill="#7f8c8d"/>
+  <rect x="6" y="92" width="116" height="6" fill="#4d4d4d"/>
+  <!-- six terminal blocks: L, L, N, PE, L, spare -->
+  <g fill="#eff0f1">
+    <rect x="12" y="26" width="16" height="66" rx="2"/>
+    <rect x="30" y="26" width="16" height="66" rx="2"/>
+    <rect x="48" y="26" width="16" height="66" rx="2"/>
+    <rect x="66" y="26" width="16" height="66" rx="2"/>
+    <rect x="84" y="26" width="16" height="66" rx="2"/>
+    <rect x="102" y="26" width="16" height="66" rx="2"/>
+  </g>
+  <!-- right-hand shading of each block -->
+  <g fill="#bdc3c7">
+    <rect x="24" y="28" width="4" height="62"/>
+    <rect x="42" y="28" width="4" height="62"/>
+    <rect x="60" y="28" width="4" height="62"/>
+    <rect x="78" y="28" width="4" height="62"/>
+    <rect x="96" y="28" width="4" height="62"/>
+    <rect x="114" y="28" width="4" height="62"/>
+  </g>
+  <!-- colored marker bands -->
+  <rect x="12" y="26" width="16" height="10" rx="2" fill="#7f8c8d"/>
+  <rect x="30" y="26" width="16" height="10" rx="2" fill="#7f8c8d"/>
+  <rect x="48" y="26" width="16" height="10" rx="2" fill="#3daee9"/>
+  <rect x="66" y="26" width="16" height="10" rx="2" fill="#27ae60"/>
+  <rect x="70" y="26" width="8" height="10" fill="#fdbc4b"/>
+  <rect x="84" y="26" width="16" height="10" rx="2" fill="#7f8c8d"/>
+  <rect x="102" y="26" width="16" height="10" rx="2" fill="#da4453"/>
+  <!-- screws -->
+  <g fill="#31363b">
+    <circle cx="20" cy="50" r="4.5"/><circle cx="20" cy="74" r="4.5"/>
+    <circle cx="38" cy="50" r="4.5"/><circle cx="38" cy="74" r="4.5"/>
+    <circle cx="56" cy="50" r="4.5"/><circle cx="56" cy="74" r="4.5"/>
+    <circle cx="74" cy="50" r="4.5"/><circle cx="74" cy="74" r="4.5"/>
+    <circle cx="92" cy="50" r="4.5"/><circle cx="92" cy="74" r="4.5"/>
+    <circle cx="110" cy="50" r="4.5"/><circle cx="110" cy="74" r="4.5"/>
+  </g>
+  <g fill="#eff0f1">
+    <rect x="16" y="49" width="8" height="2"/><rect x="16" y="73" width="8" height="2"/>
+    <rect x="34" y="49" width="8" height="2"/><rect x="34" y="73" width="8" height="2"/>
+    <rect x="52" y="49" width="8" height="2"/><rect x="52" y="73" width="8" height="2"/>
+    <rect x="70" y="49" width="8" height="2"/><rect x="70" y="73" width="8" height="2"/>
+    <rect x="88" y="49" width="8" height="2"/><rect x="88" y="73" width="8" height="2"/>
+    <rect x="106" y="49" width="8" height="2"/><rect x="106" y="73" width="8" height="2"/>
+  </g>
+</svg>

ico/copyright

@@ -216,6 +216,7 @@ Clarification:
     ico/128x128/diagram.png by the QElectroTech team (License CC BY-ND 3.0)
     ico/128x128/document-export.png by the QElectroTech team (License CC BY-ND 3.0)
     ico/128x128/project.png by the QElectroTech team (License CC BY-ND 3.0)
+    ico/128x128/terminalstrip.png and configure-shortcuts.png by Jeff Patterson from the QElectroTech team (License CC BY-ND 3.0), rendered from the .svg files beside them
     ico/scalable/pdf-import.svg by Jeff Patterson from the QElectroTech team (License CC BY-ND 3.0), laid out like ico/22x22/insert-image.png
     ico/scalable/diagram.svg, folio-new.svg, folio-delete.svg, folio-properties.svg, label.svg by Jeff Patterson from the QElectroTech team (License CC BY-ND 3.0), the folio icons redrawn in the same style
     ico/256x256/* by Nuri from the QElectroTech team (License CC BY-ND 3.0)

ico/icon-themes.qrc

@@ -259,12 +259,14 @@
         <file alias="themes/qet/48x48/user-away-extended.png">48x48/user-away-extended.png</file>
         <file alias="themes/qet/48x48/user-away.png">48x48/user-away.png</file>
         <file alias="themes/qet/48x48/view-pim-journal.png">48x48/view-pim-journal.png</file>
+        <file alias="themes/qet/128x128/configure-shortcuts.png">128x128/configure-shortcuts.png</file>
         <file alias="themes/qet/128x128/diagram.png">128x128/diagram.png</file>
         <file alias="themes/qet/128x128/document-export.png">128x128/document-export.png</file>
         <file alias="themes/qet/128x128/plasmagik.png">128x128/plasmagik.png</file>
         <file alias="themes/qet/128x128/printer.png">128x128/printer.png</file>
         <file alias="themes/qet/128x128/project.png">128x128/project.png</file>
         <file alias="themes/qet/128x128/settings.png">128x128/settings.png</file>
+        <file alias="themes/qet/128x128/terminalstrip.png">128x128/terminalstrip.png</file>
         <file alias="themes/qet/scalable/diagram.svg">scalable/diagram.svg</file>
         <file alias="themes/qet/scalable/folio-delete.svg">scalable/folio-delete.svg</file>
         <file alias="themes/qet/scalable/folio-new.svg">scalable/folio-new.svg</file>
@@ -469,5 +471,7 @@
         <file>themes/qet-dark/scalable/ellipse-to-bezier.svg</file>
         <file>themes/qet-dark/scalable/rect-to-bezier.svg</file>
         <file>themes/qet-dark/scalable/rect-to-polyline.svg</file>
+        <file alias="themes/qet-dark/128x128/document-export.png">128x128/document-export.png</file>
+        <file alias="themes/qet-dark/128x128/printer.png">128x128/printer.png</file>
     </qresource>
 </RCC>

lang/phrase/qet_fr_ca.qph

@@ -0,0 +1,222 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="ca">
+<phrase>
+    <source>Réf. croisée</source>
+    <target>Ref. creuada</target>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>armari</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>bobina</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>born</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>bornes</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>cable</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>calibre</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>cartutx</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>champ de texte</source>
+    <target>camp de text</target>
+    <definition>text field</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>col·lecció</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>conductor</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>contacte</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>contactor</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>corrent</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>disjuntor</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>carpeta</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>element</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>esclau</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fil</source>
+    <target>fil</target>
+    <definition>wire</definition>
+</phrase>
+<phrase>
+    <source>folio</source>
+    <target>plec</target>
+    <definition>sheet - one drawing of a set</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>fusible</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>graella</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>interruptor</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>mestre</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>plantilla</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>motor</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>neutre</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>nomenclatura</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>numeració</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>fase</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>potencial</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>projecte</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>potència</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>relé</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>referència de plec</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>referència</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>remissió de plec</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>esquema</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>secció</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>sumari</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>tensió</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>terra</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>text</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>transformador</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_de.qph

@@ -100,4 +100,8 @@
     <source>traduction</source>
     <target>Übersetzung</target>
 </phrase>
+<phrase>
+    <source>Modifier le nom de la borne</source>
+    <target>Klemmenname ändern</target>
+</phrase>
 </QPH>

lang/phrase/qet_fr_en.qph

@@ -0,0 +1,918 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="en">
+<phrase>
+    <source>Blue : Blue</source>
+    <target>Blue : Blue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : CornflowerBlue</source>
+    <target>Blue : CornflowerBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : DarkBlue</source>
+    <target>Blue : DarkBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : DeepSkyBlue</source>
+    <target>Blue : DeepSkyBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : DodgerBlue</source>
+    <target>Blue : DodgerBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : LightBlue</source>
+    <target>Blue : LightBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : LightSkyBlue</source>
+    <target>Blue : LightSkyBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : LightSteelBlue</source>
+    <target>Blue : LightSteelBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : MediumBlue</source>
+    <target>Blue : MediumBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : MidnightBlue</source>
+    <target>Blue : MidnightBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : Navy</source>
+    <target>Blue : Navy</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : PowderBlue</source>
+    <target>Blue : PowderBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : RoyalBlue</source>
+    <target>Blue : RoyalBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : SkyBlue</source>
+    <target>Blue : SkyBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : SteelBlue</source>
+    <target>Blue : SteelBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Bisque</source>
+    <target>Brown : Bisque</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : BlanchedAlmond</source>
+    <target>Brown : BlanchedAlmond</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Brown</source>
+    <target>Brown : Brown</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Burlywood</source>
+    <target>Brown : Burlywood</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Chocolate</source>
+    <target>Brown : Chocolate</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Cornsilk</source>
+    <target>Brown : Cornsilk</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : DarkGoldenrod</source>
+    <target>Brown : DarkGoldenrod</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Goldenrod</source>
+    <target>Brown : Goldenrod</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Maroon</source>
+    <target>Brown : Maroon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : NavajoWhite</source>
+    <target>Brown : NavajoWhite</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Peru</source>
+    <target>Brown : Peru</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : RosyBrown</source>
+    <target>Brown : RosyBrown</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : SaddleBrown</source>
+    <target>Brown : SaddleBrown</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : SandyBrown</source>
+    <target>Brown : SandyBrown</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Sienna</source>
+    <target>Brown : Sienna</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Tan</source>
+    <target>Brown : Tan</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Wheat</source>
+    <target>Brown : Wheat</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Aqua</source>
+    <target>Cyan : Aqua</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Aquamarine</source>
+    <target>Cyan : Aquamarine</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : CadetBlue</source>
+    <target>Cyan : CadetBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Cyan</source>
+    <target>Cyan : Cyan</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : DarkCyan</source>
+    <target>Cyan : DarkCyan</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : DarkTurquoise</source>
+    <target>Cyan : DarkTurquoise</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : LightCyan</source>
+    <target>Cyan : LightCyan</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : LightSeaGreen</source>
+    <target>Cyan : LightSeaGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : MediumTurquoise</source>
+    <target>Cyan : MediumTurquoise</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : PaleTurquoise</source>
+    <target>Cyan : PaleTurquoise</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Teal</source>
+    <target>Cyan : Teal</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Turquoise</source>
+    <target>Cyan : Turquoise</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : Black</source>
+    <target>Gray : Black</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : DarkGray</source>
+    <target>Gray : DarkGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : DarkSlateGray</source>
+    <target>Gray : DarkSlateGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : DimGray</source>
+    <target>Gray : DimGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : Gainsboro</source>
+    <target>Gray : Gainsboro</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : Gray</source>
+    <target>Gray : Gray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : LightGray</source>
+    <target>Gray : LightGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : LightSlateGray</source>
+    <target>Gray : LightSlateGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : Silver</source>
+    <target>Gray : Silver</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : SlateGray</source>
+    <target>Gray : SlateGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : Chartreuse</source>
+    <target>Green : Chartreuse</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : DarkGreen</source>
+    <target>Green : DarkGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : DarkOliveGreen</source>
+    <target>Green : DarkOliveGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : DarkSeaGreen</source>
+    <target>Green : DarkSeaGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : ForestGreen</source>
+    <target>Green : ForestGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : Green</source>
+    <target>Green : Green</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : GreenYellow</source>
+    <target>Green : GreenYellow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : LawnGreen</source>
+    <target>Green : LawnGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : LightGreen</source>
+    <target>Green : LightGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : Lime</source>
+    <target>Green : Lime</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : LimeGreen</source>
+    <target>Green : LimeGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : MediumAquamarine</source>
+    <target>Green : MediumAquamarine</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : MediumSeaGreen</source>
+    <target>Green : MediumSeaGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : MediumSpringGreen</source>
+    <target>Green : MediumSpringGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : Olive</source>
+    <target>Green : Olive</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : OliveDrab</source>
+    <target>Green : OliveDrab</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : PaleGreen</source>
+    <target>Green : PaleGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : SeaGreen</source>
+    <target>Green : SeaGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : SpringGreen</source>
+    <target>Green : SpringGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : YellowGreen</source>
+    <target>Green : YellowGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : Coral</source>
+    <target>Orange : Coral</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : DarkOrange</source>
+    <target>Orange : DarkOrange</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : Orange</source>
+    <target>Orange : Orange</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : OrangeRed</source>
+    <target>Orange : OrangeRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : Tomato</source>
+    <target>Orange : Tomato</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : DeepPink</source>
+    <target>Pink: DeepPink</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : HotPink</source>
+    <target>Pink: HotPink</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : LightPink</source>
+    <target>Pink: LightPink</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : MediumVioletRed</source>
+    <target>Pink: MediumVioletRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : PaleVioletRed</source>
+    <target>Pink: PaleVioletRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : Pink</source>
+    <target>Pink: Pink</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : BlueViolet</source>
+    <target>Purple : BlueViolet</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : DarkMagenta</source>
+    <target>Purple : DarkMagenta</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : DarkOrchid</source>
+    <target>Purple : DarkOrchid</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : DarkSlateBlue</source>
+    <target>Purple : DarkSlateBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : DarkViolet</source>
+    <target>Purple : DarkViolet</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Fuchsia</source>
+    <target>Purple : Fuchsia</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Indigo</source>
+    <target>Purple : Indigo</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Lavender</source>
+    <target>Purple : Lavender</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Magenta</source>
+    <target>Purple : Magenta</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : MediumOrchid</source>
+    <target>Purple : MediumOrchid</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : MediumPurple</source>
+    <target>Purple : MediumPurple</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : MediumSlateBlue</source>
+    <target>Purple : MediumSlateBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Orchid</source>
+    <target>Purple : Orchid</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Plum</source>
+    <target>Purple : Plum</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Purple</source>
+    <target>Purple : Purple</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : SlateBlue</source>
+    <target>Purple : SlateBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Thistle</source>
+    <target>Purple : Thistle</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Violet</source>
+    <target>Purple : Violet</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : Crimson</source>
+    <target>Red : Crimson</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : DarkRed</source>
+    <target>Red : DarkRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : DarkSalmon</source>
+    <target>Red: DarkSalmon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : Firebrick</source>
+    <target>Red : Firebrick</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : IndianRed</source>
+    <target>Red: IndianRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : LightCoral</source>
+    <target>Red: LightCoral</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : LightSalmon</source>
+    <target>Red: LightSalmon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : Red</source>
+    <target>Red : Red</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : Salmon</source>
+    <target>Red: Salmon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : AliceBlue</source>
+    <target>White : AliceBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : AntiqueWhite</source>
+    <target>White : AntiqueWhite</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Azure</source>
+    <target>White : Azure</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Beige</source>
+    <target>White : Beige</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : FloralWhite</source>
+    <target>White : FloralWhite</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : GhostWhite</source>
+    <target>White : GhostWhite</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Honeydew</source>
+    <target>White : Honeydew</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Ivory</source>
+    <target>White : Ivory</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : LavenderBlush</source>
+    <target>White : LavenderBlush</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Linen</source>
+    <target>White : Linen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : MintCream</source>
+    <target>White : MintCream</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : MistyRose</source>
+    <target>White : MistyRose</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : OldLace</source>
+    <target>White : OldLace</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Seashell</source>
+    <target>White : Seashell</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Snow</source>
+    <target>White : Snow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : White</source>
+    <target>White : White</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : WhiteSmoke</source>
+    <target>White : WhiteSmoke</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : DarkKhaki</source>
+    <target>Yellow : DarkKhaki</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : Gold</source>
+    <target>Yellow : Gold</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : Khaki</source>
+    <target>Yellow : Khaki</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : LemonChiffon</source>
+    <target>Yellow : LemonChiffon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : LightGoldenrodYellow</source>
+    <target>Yellow : LightGoldenrodYellow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : LightYellow</source>
+    <target>Yellow : LightYellow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : Moccasin</source>
+    <target>Yellow : Moccasin</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : PaleGoldenrod</source>
+    <target>Yellow : PaleGoldenrod</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : PapayaWhip</source>
+    <target>Yellow : PapayaWhip</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : PeachPuff</source>
+    <target>Yellow : PeachPuff</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : Yellow</source>
+    <target>Yellow : Yellow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>cabinet</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>coil</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>terminal</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>terminal strip</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>cable</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>rating</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>title block</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>champ de texte</source>
+    <target>text field</target>
+    <definition>text field</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>collection</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>conductor</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>contact</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>contactor</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>current</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>circuit breaker</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>folder</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>element</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>slave</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fil</source>
+    <target>wire</target>
+    <definition>wire</definition>
+</phrase>
+<phrase>
+    <source>folio</source>
+    <target>sheet</target>
+    <definition>sheet - one drawing of a set</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>fuse</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>grid</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>switch</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>master</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>template</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>motor</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>neutral</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>parts list</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>numbering</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>phase</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>potential</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>project</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>power</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>relay</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>sheet cross-reference</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>designation</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>sheet cross-reference</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>diagram</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>cross-section</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>summary</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>voltage</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>earth</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>text</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>transformer</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_nl_BE.qph

@@ -0,0 +1,941 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="nl_BE">
+<phrase>
+    <source>    Contacts : NO : %1, NC : %2, inverseurs : %3, autres : %4
+</source>
+    <target>Contacten: NO: %1, NC: %2, wisselcontacten: %3, andere: %4
+</target>
+</phrase>
+<phrase>
+    <source>    Contacts : NO : %1/%2, NC : %3/%4, inverseurs : %5/%6, autres : %7/%8
+</source>
+    <target>Contacten: NO: %1/%2, NC: %3/%4, wisselcontacten: %5/%6, andere: %7/%8
+</target>
+</phrase>
+<phrase>
+    <source> %</source>
+    <target>%</target>
+</phrase>
+<phrase>
+    <source> (Ctrl pendant le glissement = position libre, sans accrochage à la grille)</source>
+    <target>(Ctrl tijdens het slepen = vrije positie, zonder vastklikken aan het raster)</target>
+</phrase>
+<phrase>
+    <source> -- %1 : mode %2</source>
+    <target>-- %1 : modus %2</target>
+</phrase>
+<phrase>
+    <source> ; point rouge : glisser pour repositionner le centre de rotation</source>
+    <target>; rood punt: slepen om het draaipunt te verplaatsen</target>
+</phrase>
+<phrase>
+    <source> ; point turquoise : arc</source>
+    <target>; turquoise punt: boog</target>
+</phrase>
+<phrase>
+    <source> ; un bord : inclinaison</source>
+    <target>; een rand: kanteling</target>
+</phrase>
+<phrase>
+    <source> °</source>
+    <target>°</target>
+</phrase>
+<phrase>
+    <source> — Cliquer : mode %1</source>
+    <target>— Klikken: modus %1</target>
+</phrase>
+<phrase>
+    <source>, Alt = créer des poignées</source>
+    <target>, Alt = handgrepen creëren</target>
+</phrase>
+<phrase>
+    <source>, Alt = détacher en polyligne</source>
+    <target>, Alt = losmaken als polylijn</target>
+</phrase>
+<phrase>
+    <source>Ajoute une courbe de Bézier sur le folio actuel</source>
+    <target>Voegt een Béziercurve toe op het huidige blad</target>
+</phrase>
+<phrase>
+    <source>Ajouter la borne %1</source>
+    <target>Klem %1 toevoegen</target>
+</phrase>
+<phrase>
+    <source>Ajouter un point à une courbe</source>
+    <target>Een punt aan een curve toevoegen</target>
+</phrase>
+<phrase>
+    <source>Ajouter une courbe</source>
+    <target>Een curve toevoegen</target>
+</phrase>
+<phrase>
+    <source>Angle</source>
+    <target>Hoek</target>
+</phrase>
+<phrase>
+    <source>Anguleux</source>
+    <target>Hoekig</target>
+</phrase>
+<phrase>
+    <source>Aperçu</source>
+    <target>Voorbeeld</target>
+</phrase>
+<phrase>
+    <source>Arrondir les coins d&apos;%1</source>
+    <target>Hoeken van %1 afronden</target>
+</phrase>
+<phrase>
+    <source>Borne 1</source>
+    <target>Klem 1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Borne 2</source>
+    <target>Klem 2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Catégorie</source>
+    <target>Categorie</target>
+</phrase>
+<phrase>
+    <source>Ce format ne prend pas en charge la transparence : l&apos;image sera enregistrée telle qu&apos;elle était avant l&apos;application de la couleur transparente. Continuer ?</source>
+    <target>Dit formaat ondersteunt geen transparantie: de afbeelding wordt opgeslagen zoals ze was vóór het toepassen van de transparante kleur. Doorgaan?</target>
+</phrase>
+<phrase>
+    <source>Champ de texte</source>
+    <target>Tekstveld</target>
+</phrase>
+<phrase>
+    <source>Clic : positionner à la taille d&apos;origine. Cliquer-glisser : positionner et redimensionner. Clic droit : pivoter de 90°. Ctrl+molette : ajuster la taille.</source>
+    <target>Klik: op oorspronkelijke grootte plaatsen. Klikken en slepen: plaatsen en formaat wijzigen. Rechtsklik: 90° draaien. Ctrl+muiswiel: formaat aanpassen.</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : point suivant ; double-clic ou Entrée : terminer ; clic droit : annuler le dernier point</source>
+    <target>Linkerklik: volgend punt; dubbelklik of Enter: beëindigen; rechtsklik: laatste punt annuleren</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le coin opposé (Maj = carré, Ctrl = depuis le centre + position libre, Ctrl+Maj = carré centré) ; clic droit : annuler</source>
+    <target>Linkerklik: tegenoverliggende hoek plaatsen (Shift = vierkant, Ctrl = vanuit het midden + vrije positie, Ctrl+Shift = gecentreerd vierkant); rechtsklik: annuleren</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le coin opposé (Maj = cercle, Ctrl = depuis le centre + position libre, Ctrl+Maj = cercle centré) ; clic droit : annuler</source>
+    <target>Linkerklik: tegenoverliggende hoek plaatsen (Shift = cirkel, Ctrl = vanuit het midden + vrije positie, Ctrl+Shift = gecentreerde cirkel); rechtsklik: annuleren</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le point de départ (Ctrl = position libre)</source>
+    <target>Linkerklik: startpunt plaatsen (Ctrl = vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le point final (Ctrl = position libre) ; clic droit : annuler</source>
+    <target>Linkerklik: eindpunt plaatsen (Ctrl = vrije positie); rechtsklik: annuleren</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le premier coin (Ctrl = point central, position libre)</source>
+    <target>Linkerklik: eerste hoek plaatsen (Ctrl = middelpunt, vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le premier point (Ctrl = position libre)</source>
+    <target>Linkerklik: eerste punt plaatsen (Ctrl = vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Clic: point anguleux. Cliquer-glisser: point courbe. Clic sur le premier point: fermer. Échap/Entrée: terminer. Clic droit: annuler le dernier point.</source>
+    <target>Klik: hoekpunt. Klikken en slepen: curvepunt. Klik op het eerste punt: sluiten. Esc/Enter: beëindigen. Rechtsklik: laatste punt annuleren.</target>
+</phrase>
+<phrase>
+    <source>Cliquer</source>
+    <target>Klikken</target>
+</phrase>
+<phrase>
+    <source>Cliquer : mode %1</source>
+    <target>Klikken: modus %1</target>
+</phrase>
+<phrase>
+    <source>Cliquez pour choisir une couleur</source>
+    <target>Klik om een kleur te kiezen</target>
+</phrase>
+<phrase>
+    <source>Cliquez sur l&apos;image pour ajouter une couleur. Ajustez la tolérance de chaque couleur avec son curseur, ou cliquez sur × pour la retirer.</source>
+    <target>Klik op de afbeelding om een kleur toe te voegen. Pas de tolerantie van elke kleur aan met de schuifregelaar, of klik op × om ze te verwijderen.</target>
+</phrase>
+<phrase>
+    <source>Cliquez sur l&apos;image pour choisir une couleur</source>
+    <target>Klik op de afbeelding om een kleur te kiezen</target>
+</phrase>
+<phrase>
+    <source>Coins arrondis</source>
+    <target>Afgeronde hoeken</target>
+</phrase>
+<phrase>
+    <source>Composant 1</source>
+    <target>Component 1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Composant 2</source>
+    <target>Component 2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Convertir %1 en courbe de Bézier</source>
+    <target>%1 omzetten naar Béziercurve</target>
+</phrase>
+<phrase>
+    <source>Convertir %1 en polyligne</source>
+    <target>%1 omzetten naar polylijn</target>
+</phrase>
+<phrase>
+    <source>Convertir en courbe de Bézier</source>
+    <target>Omzetten naar Béziercurve</target>
+</phrase>
+<phrase>
+    <source>Convertir en polyligne</source>
+    <target>Omzetten naar polylijn</target>
+</phrase>
+<phrase>
+    <source>Couleur transparente</source>
+    <target>Transparante kleur</target>
+</phrase>
+<phrase>
+    <source>Couleur transparente...</source>
+    <target>Transparante kleur...</target>
+</phrase>
+<phrase>
+    <source>Courant nominal</source>
+    <target>Nominale stroom</target>
+</phrase>
+<phrase>
+    <source>Deplacer le centre de rotation</source>
+    <target>Draaipunt verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Description</source>
+    <target>Beschrijving</target>
+</phrase>
+<phrase>
+    <source>Distance in pixels between the label and the slave cross reference</source>
+    <target>Afstand in pixels tussen het label en de slave-kruisverwijzing</target>
+</phrase>
+<phrase>
+    <source>Distance label - slave :</source>
+    <target>Afstand label - slave:</target>
+</phrase>
+<phrase>
+    <source>Définir une couleur transparente</source>
+    <target>Een transparante kleur instellen</target>
+</phrase>
+<phrase>
+    <source>Déformer une courbe</source>
+    <target>Een curve vervormen</target>
+</phrase>
+<phrase>
+    <source>Déplacer le centre de rotation d&apos;une image</source>
+    <target>Het draaipunt van een afbeelding verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Déverrouillé : largeur et hauteur peuvent être modifiées indépendamment. Cliquer pour verrouiller.</source>
+    <target>Ontgrendeld: breedte en hoogte kunnen onafhankelijk worden gewijzigd. Klik om te vergrendelen.</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image d&apos;origine sous...</source>
+    <target>Oorspronkelijke afbeelding opslaan als...</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image sous...</source>
+    <target>Afbeelding opslaan als...</target>
+</phrase>
+<phrase>
+    <source>Erreur</source>
+    <target>Fout</target>
+</phrase>
+<phrase>
+    <source>Exclure de la nomenclature</source>
+    <target>Uitsluiten van de stuklijst</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter %1</source>
+    <target>%1 roteren</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter une image</source>
+    <target>Een afbeelding draaien</target>
+</phrase>
+<phrase>
+    <source>Faites glisser les poignées, ou l&apos;intérieur du cadre, pour ajuster la zone à conserver.</source>
+    <target>Sleep de handgrepen, of het binnenste van het kader, om het te behouden gebied aan te passen.</target>
+</phrase>
+<phrase>
+    <source>Fil</source>
+    <target>Draad</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Folio</source>
+    <target>Blad</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Forme fermée</source>
+    <target>Gesloten vorm</target>
+</phrase>
+<phrase>
+    <source>Glisser %1 : rotation (Maj = 15°)</source>
+    <target>Sleep %1: rotatie (Shift = 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : ajuster l&apos;arc (Ctrl = position libre, Maj = 15°)</source>
+    <target>Slepen: de boog aanpassen (Ctrl = vrije positie, Shift = 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : arrondir les coins (Ctrl = position libre)</source>
+    <target>Slepen: hoeken afronden (Ctrl = vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Glisser : déformer la courbe (Ctrl = position libre, Alt = briser la tangente)</source>
+    <target>Slepen: de curve vervormen (Ctrl = vrije positie, Alt = de raaklijn breken)</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer ce point</source>
+    <target>Slepen: dit punt verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer le centre de rotation</source>
+    <target>Slepen: draaipunt verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer le point (Ctrl = position libre</source>
+    <target>Slepen: het punt verplaatsen (Ctrl = vrije positie</target>
+</phrase>
+<phrase>
+    <source>Glisser : inclinaison (Ctrl = position libre, Maj = 15°)</source>
+    <target>Slepen: kanteling (Ctrl = vrije positie, Shift = 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : incliner (Maj = par pas de 15°)</source>
+    <target>Slepen: kantelen (Shift = stappen van 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : pivoter (Maj = par pas de 15°)</source>
+    <target>Slepen: draaien (Shift = stappen van 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : redimensionner (Ctrl = depuis le centre + position libre, Maj = proportions</source>
+    <target>Slepen: formaat wijzigen (Ctrl = vanuit het midden + vrije positie, Shift = verhoudingen</target>
+</phrase>
+<phrase>
+    <source>Glisser : redimensionner (Maj = conserver les proportions, Ctrl = depuis le centre)</source>
+    <target>Slepen: formaat wijzigen (Shift = verhoudingen behouden, Ctrl = vanuit het midden)</target>
+</phrase>
+<phrase>
+    <source>Glisser : repositionner le centre de rotation (Ctrl = position libre)</source>
+    <target>Slepen: het draaipunt verplaatsen (Ctrl = vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Glisser : rotation (Ctrl = position libre, Maj = 15°)</source>
+    <target>Slepen: rotatie (Ctrl = vrije positie, Shift = 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser le point violet : arrondir les coins</source>
+    <target>Sleep het paarse punt: hoeken afronden</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin : pivoter (Maj = par pas de 15°) ; glisser un bord : incliner (Maj = par pas de 15°) ; point rouge : déplacer le centre de rotation</source>
+    <target>Sleep een hoek: draaien (Shift = stappen van 15°); sleep een rand: kantelen (Shift = stappen van 15°); rood punt: draaipunt verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin/bord : redimensionner (Ctrl = depuis le centre, Maj = conserver les proportions)</source>
+    <target>Sleep een hoek/rand: formaat wijzigen (Ctrl = vanuit het midden, Shift = verhoudingen behouden)</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin/bord : redimensionner (Ctrl = depuis le centre, Maj = proportions, Alt = détacher en polyligne)</source>
+    <target>Sleep een hoek/rand: formaat wijzigen (Ctrl = vanuit het midden, Shift = verhoudingen, Alt = losmaken als polylijn)</target>
+</phrase>
+<phrase>
+    <source>Glisser un point : le déplacer</source>
+    <target>Sleep een punt: het verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser une extrémité : la déplacer</source>
+    <target>Sleep een uiteinde: het verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser une poignée ou la courbe : déformer (Alt = briser la tangente) ; Alt+glisser un point anguleux : créer des poignées ; clic droit : menu du nœud le plus proche</source>
+    <target>Sleep een handgreep of de curve: vervormen (Alt = de raaklijn breken); Alt+sleep een hoekpunt: handgrepen creëren; rechtsklik: menu van het dichtstbijzijnde knooppunt</target>
+</phrase>
+<phrase>
+    <source>Géométrie</source>
+    <target>Geometrie</target>
+</phrase>
+<phrase>
+    <source>Hauteur</source>
+    <target>Hoogte</target>
+</phrase>
+<phrase>
+    <source>Image BMP (*.bmp)</source>
+    <target>BMP-afbeelding (*.bmp)</target>
+</phrase>
+<phrase>
+    <source>Image Files (*.png *.jpg *.jpeg *.bmp *.svg)</source>
+    <target>Afbeeldingsbestanden (*.png *.jpg *.jpeg *.bmp *.svg)</target>
+</phrase>
+<phrase>
+    <source>Image JPEG (*.jpg *.jpeg)</source>
+    <target>JPEG-afbeelding (*.jpg *.jpeg)</target>
+</phrase>
+<phrase>
+    <source>Image PNG (*.png)</source>
+    <target>PNG-afbeelding (*.png)</target>
+</phrase>
+<phrase>
+    <source>Image source</source>
+    <target>Bronafbeelding</target>
+</phrase>
+<phrase>
+    <source>Image SVG (*.svg)</source>
+    <target>SVG-afbeelding (*.svg)</target>
+</phrase>
+<phrase>
+    <source>Images non incluses dans l&apos;export DXF</source>
+    <target>Afbeeldingen niet inbegrepen in de DXF-export</target>
+    <definition>message box title</definition>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer l&apos;image à cet emplacement.</source>
+    <target>Kan de afbeelding niet op die locatie opslaan.</target>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer la nomenclature dans %1.
+%2</source>
+    <target>Kan de stuklijst niet opslaan in %1.
+%2</target>
+</phrase>
+<phrase>
+    <source>Impossible de charger l&apos;image.</source>
+    <target>Kan de afbeelding niet laden.</target>
+</phrase>
+<phrase>
+    <source>Inclinaison X</source>
+    <target>Kanteling X</target>
+</phrase>
+<phrase>
+    <source>Inclinaison Y</source>
+    <target>Kanteling Y</target>
+</phrase>
+<phrase>
+    <source>Incliner %1</source>
+    <target>%1 kantelen</target>
+</phrase>
+<phrase>
+    <source>Incliner une image</source>
+    <target>Een afbeelding kantelen</target>
+</phrase>
+<phrase>
+    <source>La limite fixée pour cet élément maître est atteinte (Limite: %1).
+
+Voulez-vous tout de même lier ce contact esclave ?</source>
+    <target>De limiet voor dit hoofdelement is bereikt (Limiet: %1).
+
+Wilt u dit hulpcontact toch koppelen?</target>
+</phrase>
+<phrase>
+    <source>Largeur</source>
+    <target>Breedte</target>
+</phrase>
+<phrase>
+    <source>Le format DXF utilisé ici (AC1006) ne permet pas d&apos;inclure d&apos;image. Les images seront représentées uniquement par un rectangle de contour (position, taille, rotation et inclinaison conservées), sans le contenu de l&apos;image.</source>
+    <target>Het hier gebruikte DXF-formaat (AC1006) laat niet toe afbeeldingen op te nemen. Afbeeldingen worden enkel voorgesteld door een omtrekrechthoek (positie, grootte, rotatie en kanteling behouden), zonder de inhoud van de afbeelding.</target>
+    <definition>message box content</definition>
+</phrase>
+<phrase>
+    <source>Lisse</source>
+    <target>Vloeiend</target>
+</phrase>
+<phrase>
+    <source>Liste de câblage</source>
+    <target>Bekabelingslijst</target>
+    <definition>window title</definition>
+</phrase>
+<phrase>
+    <source>Liste de câblage (base de données)</source>
+    <target>Bekabelingslijst (database)</target>
+</phrase>
+<phrase>
+    <source>Localisation :</source>
+    <target>Locatie:</target>
+</phrase>
+<phrase>
+    <source>Longueur</source>
+    <target>Lengte</target>
+</phrase>
+<phrase>
+    <source>margin: 5px; font-weight: bold;</source>
+    <target>margin: 5px; font-weight: bold;</target>
+</phrase>
+<phrase>
+    <source>max:</source>
+    <target>max:</target>
+</phrase>
+<phrase>
+    <source>min:</source>
+    <target>min:</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal</source>
+    <target>Horizontaal spiegelen</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal d&apos;une image</source>
+    <target>Horizontaal spiegelen van een afbeelding</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal de %1</source>
+    <target>Horizontaal spiegelen van %1</target>
+</phrase>
+<phrase>
+    <source>Miroir impossible : inclinaison trop extrême pour cette forme</source>
+    <target>Spiegelen onmogelijk: kanteling te extreem voor deze vorm</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical</source>
+    <target>Verticaal spiegelen</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical d&apos;une image</source>
+    <target>Verticaal spiegelen van een afbeelding</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical de %1</source>
+    <target>Verticaal spiegelen van %1</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;un arc</source>
+    <target>Hoek van een boog wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;une forme</source>
+    <target>Hoek van een vorm wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;une image</source>
+    <target>De hoek van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;inclinaison d&apos;une image</source>
+    <target>De kanteling van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la courbure d&apos;%1</source>
+    <target>Kromming van %1 wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la forme d&apos;%1</source>
+    <target>Vorm van %1 wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la hauteur d&apos;une image</source>
+    <target>De hoogte van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la largeur d&apos;une image</source>
+    <target>De breedte van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la longueur d&apos;une ligne</source>
+    <target>Lengte van een lijn wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la taille d&apos;une forme</source>
+    <target>Grootte van een vorm wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier le type d&apos;un nœud</source>
+    <target>Het type van een knooppunt wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier une image</source>
+    <target>Een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modèle</source>
+    <target>Model</target>
+</phrase>
+<phrase>
+    <source>Nombre maximum de contacts esclaves définis : non défini
+</source>
+    <target>Maximumaantal gedefinieerde hulpcontacten: niet gedefinieerd
+</target>
+</phrase>
+<phrase>
+    <source>Notes</source>
+    <target>Notities</target>
+</phrase>
+<phrase>
+    <source>Nœud le plus proche</source>
+    <target>Dichtstbijzijnde knooppunt</target>
+</phrase>
+<phrase>
+    <source>pivoter/incliner</source>
+    <target>draaien/kantelen</target>
+</phrase>
+<phrase>
+    <source>Ponter des bornes entre-elles</source>
+    <target>Klemmen onderling doorverbinden</target>
+</phrase>
+<phrase>
+    <source>Rayon X</source>
+    <target>Straal X</target>
+</phrase>
+<phrase>
+    <source>Rayon Y</source>
+    <target>Straal Y</target>
+</phrase>
+<phrase>
+    <source>redimensionner</source>
+    <target>formaat wijzigen</target>
+</phrase>
+<phrase>
+    <source>Redimensionner %1</source>
+    <target>%1 vergroten/verkleinen</target>
+</phrase>
+<phrase>
+    <source>Redimensionner une image</source>
+    <target>Formaat van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Remplacer l&apos;image...</source>
+    <target>Afbeelding vervangen...</target>
+</phrase>
+<phrase>
+    <source>Remplacer une image</source>
+    <target>Een afbeelding vervangen</target>
+</phrase>
+<phrase>
+    <source>Restaurer les proportions</source>
+    <target>Verhoudingen herstellen</target>
+</phrase>
+<phrase>
+    <source>Restaurer les proportions d&apos;une image</source>
+    <target>De verhoudingen van een afbeelding herstellen</target>
+</phrase>
+<phrase>
+    <source>Retirer cette couleur</source>
+    <target>Deze kleur verwijderen</target>
+</phrase>
+<phrase>
+    <source>Revenir à l&apos;image complète, sans rognage</source>
+    <target>Terug naar de volledige afbeelding, zonder bijsnijden</target>
+</phrase>
+<phrase>
+    <source>rgb(%1, %2, %3)</source>
+    <target>rgb(%1, %2, %3)</target>
+</phrase>
+<phrase>
+    <source>Rogner l&apos;image</source>
+    <target>Afbeelding bijsnijden</target>
+</phrase>
+<phrase>
+    <source>Rogner une image</source>
+    <target>Een afbeelding bijsnijden</target>
+</phrase>
+<phrase>
+    <source>Rogner...</source>
+    <target>Bijsnijden...</target>
+</phrase>
+<phrase>
+    <source>Rotation/Inclinaison</source>
+    <target>Rotatie/kanteling</target>
+</phrase>
+<phrase>
+    <source>Réinitialiser</source>
+    <target>Herinitialiseren</target>
+</phrase>
+<phrase>
+    <source>Selectionner une image...</source>
+    <target>Een afbeelding selecteren...</target>
+</phrase>
+<phrase>
+    <source>Supprimer le nœud le plus proche</source>
+    <target>Het dichtstbijzijnde knooppunt verwijderen</target>
+</phrase>
+<phrase>
+    <source>Supprimer un point d&apos;une courbe</source>
+    <target>Een punt van een curve verwijderen</target>
+</phrase>
+<phrase>
+    <source>Symétrique</source>
+    <target>Symmetrisch</target>
+</phrase>
+<phrase>
+    <source>Séparation de potentiel</source>
+    <target>Potentiaalscheiding</target>
+</phrase>
+<phrase>
+    <source>Taille</source>
+    <target>Grootte</target>
+</phrase>
+<phrase>
+    <source>Tension nominale</source>
+    <target>Nominale spanning</target>
+</phrase>
+<phrase>
+    <source>Tolérance pour cette couleur</source>
+    <target>Tolerantie voor deze kleur</target>
+</phrase>
+<phrase>
+    <source>Tous les fichiers (*)</source>
+    <target>Alle bestanden (*)</target>
+</phrase>
+<phrase>
+    <source>Transformer %1</source>
+    <target>%1 omvormen</target>
+</phrase>
+<phrase>
+    <source>Transparence non conservée</source>
+    <target>Transparantie niet behouden</target>
+</phrase>
+<phrase>
+    <source>un arc</source>
+    <target>een boog</target>
+</phrase>
+<phrase>
+    <source>un coin</source>
+    <target>een hoek</target>
+</phrase>
+<phrase>
+    <source>un point</source>
+    <target>een punt</target>
+</phrase>
+<phrase>
+    <source>une courbe</source>
+    <target>een curve</target>
+</phrase>
+<phrase>
+    <source>une extrémité</source>
+    <target>een uiteinde</target>
+</phrase>
+<phrase>
+    <source>une image</source>
+    <target>een afbeelding</target>
+    <definition>part of a sentence listing the content of a diagram</definition>
+</phrase>
+<phrase>
+    <source>Verrouiller la numérotation automatique</source>
+    <target>Automatische nummering vergrendelen</target>
+</phrase>
+<phrase>
+    <source>Verrouiller la position</source>
+    <target>Positie vergrendelen</target>
+</phrase>
+<phrase>
+    <source>Verrouillé : modifier la largeur ou la hauteur ajuste l&apos;autre pour conserver les proportions. Cliquer pour déverrouiller.</source>
+    <target>Vergrendeld: het wijzigen van de breedte of hoogte past de andere aan om de verhoudingen te behouden. Klik om te ontgrendelen.</target>
+</phrase>
+<phrase>
+    <source>Échec de l&apos;enregistrement</source>
+    <target>Opslaan mislukt</target>
+</phrase>
+<phrase>
+    <source>Édition des nœuds</source>
+    <target>Knooppunten bewerken</target>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>kast</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>spoel</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>klem</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>klemmenstrook</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>kabel</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>kaliber</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>titelblok</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>collectie</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>geleider</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>contact</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>contacteur</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>stroom</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>automaat</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>map</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>element</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>hulpcontact</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>zekering</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>raster</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>schakelaar</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>hoofd</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>sjabloon</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>motor</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>nul</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>stuklijst</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>nummering</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>fase</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>potentiaal</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>project</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>vermogen</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>relais</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>bladverwijzing</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>aanduiding</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>bladverwijzing</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>schema</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>doorsnede</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>inhoudstafel</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>spanning</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>aarde</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>tekst</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>transformator</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_pl.qph

@@ -0,0 +1,218 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="pl">
+<phrase>
+    <source>armoire</source>
+    <target>Szafa</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>Cewka</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>Zacisk</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>Listwa zaciskowa</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>Kabel</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>Prąd znamionowy</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>Tabliczka rysunkowa</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>champ de texte</source>
+    <target>Pole tekstowe</target>
+    <definition>text field</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>Biblioteka</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>Przewód</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>Styk</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>Stycznik</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>Prąd</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>Wyłącznik nadprądowy</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>Folder</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>Element</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>Element podrzędny</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fil</source>
+    <target>Przewód</target>
+    <definition>wire</definition>
+</phrase>
+<phrase>
+    <source>folio</source>
+    <target>Arkusz</target>
+    <definition>sheet - one drawing of a set</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>Bezpiecznik</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>Siatka</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>Wyłącznik</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>Element główny</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>Szablon</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>Silnik</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>Neutralny</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>Zestawienie materiałów</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>Numeracja</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>Faza</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>Potencjał</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>Projekt</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>Moc</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>Przekaźnik</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>Odnośnik do arkusza</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>Oznaczenie</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>Odnośnik do arkusza</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>Schemat</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>Przekrój</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>Spis treści</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>Napięcie</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>Uziemienie</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>Tekst</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>Transformator</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_pt_BR.qph

@@ -0,0 +1,465 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="pt_BR">
+<phrase>
+    <source>    Contacts : NO : %1, NC : %2, inverseurs : %3, autres : %4
+</source>
+    <target>Contatos: NA: %1, NF: %2, reversíveis: %3, outros: %4
+</target>
+</phrase>
+<phrase>
+    <source>    Contacts : NO : %1/%2, NC : %3/%4, inverseurs : %5/%6, autres : %7/%8
+</source>
+    <target>Contatos: NA: %1/%2, NF: %3/%4, reversíveis: %5/%6, outros: %7/%8
+</target>
+</phrase>
+<phrase>
+    <source>Aperçu</source>
+    <target>Pré-visualização</target>
+</phrase>
+<phrase>
+    <source>Arrondir les coins d&apos;%1</source>
+    <target>Arredondar os cantos de %1</target>
+</phrase>
+<phrase>
+    <source>Borne 1</source>
+    <target>Borne 1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Borne 2</source>
+    <target>Borne 2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Catégorie</source>
+    <target>Categoria</target>
+</phrase>
+<phrase>
+    <source>Ce format ne prend pas en charge la transparence : l&apos;image sera enregistrée telle qu&apos;elle était avant l&apos;application de la couleur transparente. Continuer ?</source>
+    <target>Este formato não suporta transparência: a imagem será salva como estava antes da aplicação da cor transparente. Continuar?</target>
+</phrase>
+<phrase>
+    <source>Champ de texte</source>
+    <target>Campo de texto</target>
+</phrase>
+<phrase>
+    <source>Composant 1</source>
+    <target>Componente 1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Composant 2</source>
+    <target>Componente 2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Convertir %1 en courbe de Bézier</source>
+    <target>Converter %1 em curva de Bézier</target>
+</phrase>
+<phrase>
+    <source>Convertir en courbe de Bézier</source>
+    <target>Converter em curva de Bézier</target>
+</phrase>
+<phrase>
+    <source>Courant nominal</source>
+    <target>Corrente nominal</target>
+</phrase>
+<phrase>
+    <source>Distance in pixels between the label and the slave cross reference</source>
+    <target>Distância em pixels entre o rótulo e a referência cruzada do escravo</target>
+</phrase>
+<phrase>
+    <source>Distance label - slave :</source>
+    <target>Distância do rótulo - escravo:</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image d&apos;origine sous...</source>
+    <target>Salvar a imagem original como...</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image sous...</source>
+    <target>Salvar a imagem como...</target>
+</phrase>
+<phrase>
+    <source>Erreur</source>
+    <target>Erro</target>
+</phrase>
+<phrase>
+    <source>Exclure de la nomenclature</source>
+    <target>Excluir da lista de materiais</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter %1</source>
+    <target>Girar %1</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter une image</source>
+    <target>Girar uma imagem</target>
+</phrase>
+<phrase>
+    <source>Fil</source>
+    <target>Fio</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Folio</source>
+    <target>Folha</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Hauteur</source>
+    <target>Altura</target>
+</phrase>
+<phrase>
+    <source>Image BMP (*.bmp)</source>
+    <target>Imagem BMP (*.bmp)</target>
+</phrase>
+<phrase>
+    <source>Image JPEG (*.jpg *.jpeg)</source>
+    <target>Imagem JPEG (*.jpg *.jpeg)</target>
+</phrase>
+<phrase>
+    <source>Image PNG (*.png)</source>
+    <target>Imagem PNG (*.png)</target>
+</phrase>
+<phrase>
+    <source>Image SVG (*.svg)</source>
+    <target>Imagem SVG (*.svg)</target>
+</phrase>
+<phrase>
+    <source>Images non incluses dans l&apos;export DXF</source>
+    <target>Imagens não incluídas na exportação DXF</target>
+    <definition>message box title</definition>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer l&apos;image à cet emplacement.</source>
+    <target>Não foi possível salvar a imagem neste local.</target>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer la nomenclature dans %1.
+%2</source>
+    <target>Não foi possível salvar a lista de materiais em %1.
+%2</target>
+</phrase>
+<phrase>
+    <source>Impossible de charger l&apos;image.</source>
+    <target>Não foi possível carregar a imagem.</target>
+</phrase>
+<phrase>
+    <source>Incliner %1</source>
+    <target>Inclinar %1</target>
+</phrase>
+<phrase>
+    <source>Incliner une image</source>
+    <target>Inclinar uma imagem</target>
+</phrase>
+<phrase>
+    <source>La limite fixée pour cet élément maître est atteinte (Limite: %1).
+
+Voulez-vous tout de même lier ce contact esclave ?</source>
+    <target>O limite definido para este elemento mestre foi atingido (Limite: %1).
+
+Deseja vincular este contato escravo mesmo assim?</target>
+</phrase>
+<phrase>
+    <source>Largeur</source>
+    <target>Largura</target>
+</phrase>
+<phrase>
+    <source>Le format DXF utilisé ici (AC1006) ne permet pas d&apos;inclure d&apos;image. Les images seront représentées uniquement par un rectangle de contour (position, taille, rotation et inclinaison conservées), sans le contenu de l&apos;image.</source>
+    <target>O formato DXF usado aqui (AC1006) não permite incluir imagens. As imagens serão representadas apenas por um retângulo de contorno (posição, tamanho, rotação e inclinação preservados), sem o conteúdo da imagem.</target>
+    <definition>message box content</definition>
+</phrase>
+<phrase>
+    <source>Liste de câblage</source>
+    <target>Lista de cabeamento</target>
+    <definition>window title</definition>
+</phrase>
+<phrase>
+    <source>Liste de câblage (base de données)</source>
+    <target>Lista de cabeamento (banco de dados)</target>
+</phrase>
+<phrase>
+    <source>margin: 5px; font-weight: bold;</source>
+    <target>margin: 5px; font-weight: bold;</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;un arc</source>
+    <target>Modificar o ângulo de um arco</target>
+</phrase>
+<phrase>
+    <source>Modifier la courbure d&apos;%1</source>
+    <target>Modificar a curvatura de %1</target>
+</phrase>
+<phrase>
+    <source>Modifier la forme d&apos;%1</source>
+    <target>Modificar a forma de %1</target>
+</phrase>
+<phrase>
+    <source>Modèle</source>
+    <target>Modelo</target>
+</phrase>
+<phrase>
+    <source>Nombre maximum de contacts esclaves définis : non défini
+</source>
+    <target>Número máximo de contatos escravos definidos: não definido
+</target>
+</phrase>
+<phrase>
+    <source>Notes</source>
+    <target>Observações</target>
+</phrase>
+<phrase>
+    <source>Redimensionner %1</source>
+    <target>Redimensionar %1</target>
+</phrase>
+<phrase>
+    <source>Redimensionner une image</source>
+    <target>Redimensionar uma imagem</target>
+</phrase>
+<phrase>
+    <source>Réinitialiser</source>
+    <target>Redefinir</target>
+</phrase>
+<phrase>
+    <source>Selectionner une image...</source>
+    <target>Selecionar uma imagem...</target>
+</phrase>
+<phrase>
+    <source>Séparation de potentiel</source>
+    <target>Separação de potencial</target>
+</phrase>
+<phrase>
+    <source>Taille</source>
+    <target>Tamanho</target>
+</phrase>
+<phrase>
+    <source>Tension nominale</source>
+    <target>Tensão nominal</target>
+</phrase>
+<phrase>
+    <source>Tous les fichiers (*)</source>
+    <target>Todos os arquivos (*)</target>
+</phrase>
+<phrase>
+    <source>Transparence non conservée</source>
+    <target>Transparência não preservada</target>
+</phrase>
+<phrase>
+    <source>une image</source>
+    <target>uma imagem</target>
+    <definition>part of a sentence listing the content of a diagram</definition>
+</phrase>
+<phrase>
+    <source>Verrouiller la numérotation automatique</source>
+    <target>Bloquear a numeração automática</target>
+</phrase>
+<phrase>
+    <source>Verrouiller la position</source>
+    <target>Bloquear a posição</target>
+</phrase>
+<phrase>
+    <source>Échec de l&apos;enregistrement</source>
+    <target>Falha ao salvar</target>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>armário</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>bobina</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>borne</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>borneira</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>cabo</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>calibre</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>bloco de título</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>coleção</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>condutor</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>contato</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>contator</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>corrente</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>disjuntor</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>pasta</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>elemento</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>escravo</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>fusível</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>grade</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>interruptor</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>mestre</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>modelo</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>motor</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>neutro</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>lista de materiais</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>numeração</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>fase</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>potencial</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>projeto</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>potência</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>relé</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>referência de folha</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>designação</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>remissão de folha</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>diagrama</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>seção</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>sumário</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>tensão</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>terra</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>texto</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>transformador</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_zh.qph

@@ -0,0 +1,917 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="zh">
+<phrase>
+    <source>    Contacts : NO : %1, NC : %2, inverseurs : %3, autres : %4
+</source>
+    <target>触点：常开：%1，常闭：%2，转换：%3，其他：%4
+</target>
+</phrase>
+<phrase>
+    <source>    Contacts : NO : %1/%2, NC : %3/%4, inverseurs : %5/%6, autres : %7/%8
+</source>
+    <target>触点：常开：%1/%2，常闭：%3/%4，转换：%5/%6，其他：%7/%8
+</target>
+</phrase>
+<phrase>
+    <source> %</source>
+    <target>%</target>
+</phrase>
+<phrase>
+    <source> (Ctrl pendant le glissement = position libre, sans accrochage à la grille)</source>
+    <target>（拖动时按 Ctrl = 自由位置，不吸附到网格）</target>
+</phrase>
+<phrase>
+    <source> -- %1 : mode %2</source>
+    <target>-- %1：%2 模式</target>
+</phrase>
+<phrase>
+    <source> ; point rouge : glisser pour repositionner le centre de rotation</source>
+    <target>；红点：拖动以重新定位旋转中心</target>
+</phrase>
+<phrase>
+    <source> ; point turquoise : arc</source>
+    <target>；青色点：圆弧</target>
+</phrase>
+<phrase>
+    <source> ; un bord : inclinaison</source>
+    <target>；边：倾斜</target>
+</phrase>
+<phrase>
+    <source> °</source>
+    <target>°</target>
+</phrase>
+<phrase>
+    <source> — Cliquer : mode %1</source>
+    <target>— 单击：%1 模式</target>
+</phrase>
+<phrase>
+    <source>, Alt = créer des poignées</source>
+    <target>，Alt = 创建控制柄</target>
+</phrase>
+<phrase>
+    <source>, Alt = détacher en polyligne</source>
+    <target>，Alt = 分离为多段线</target>
+</phrase>
+<phrase>
+    <source>Ajoute une courbe de Bézier sur le folio actuel</source>
+    <target>在当前图纸上添加贝塞尔曲线</target>
+</phrase>
+<phrase>
+    <source>Ajouter un point à une courbe</source>
+    <target>向曲线添加点</target>
+</phrase>
+<phrase>
+    <source>Ajouter une courbe</source>
+    <target>添加曲线</target>
+</phrase>
+<phrase>
+    <source>Angle</source>
+    <target>角度</target>
+</phrase>
+<phrase>
+    <source>Anguleux</source>
+    <target>角点</target>
+</phrase>
+<phrase>
+    <source>Aperçu</source>
+    <target>预览</target>
+</phrase>
+<phrase>
+    <source>Arrondir les coins d&apos;%1</source>
+    <target>将%1的角变圆</target>
+</phrase>
+<phrase>
+    <source>Borne 1</source>
+    <target>端子1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Borne 2</source>
+    <target>端子2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Catégorie</source>
+    <target>类别</target>
+</phrase>
+<phrase>
+    <source>Ce format ne prend pas en charge la transparence : l&apos;image sera enregistrée telle qu&apos;elle était avant l&apos;application de la couleur transparente. Continuer ?</source>
+    <target>此格式不支持透明度：图像将按应用透明色之前的状态保存。是否继续？</target>
+</phrase>
+<phrase>
+    <source>Champ de texte</source>
+    <target>文本字段</target>
+</phrase>
+<phrase>
+    <source>Clic : positionner à la taille d&apos;origine. Cliquer-glisser : positionner et redimensionner. Clic droit : pivoter de 90°. Ctrl+molette : ajuster la taille.</source>
+    <target>单击：按原始尺寸放置。单击拖动：放置并调整大小。右键：旋转 90°。Ctrl+滚轮：调整大小。</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : point suivant ; double-clic ou Entrée : terminer ; clic droit : annuler le dernier point</source>
+    <target>左键单击：下一个点；双击或 Enter：结束；右键单击：撤销上一个点</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le coin opposé (Maj = carré, Ctrl = depuis le centre + position libre, Ctrl+Maj = carré centré) ; clic droit : annuler</source>
+    <target>左键单击：放置对角（Shift = 正方形，Ctrl = 从中心 + 自由位置，Ctrl+Shift = 居中正方形）；右键单击：取消</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le coin opposé (Maj = cercle, Ctrl = depuis le centre + position libre, Ctrl+Maj = cercle centré) ; clic droit : annuler</source>
+    <target>左键单击：放置对角（Shift = 圆形，Ctrl = 从中心 + 自由位置，Ctrl+Shift = 居中圆形）；右键单击：取消</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le point de départ (Ctrl = position libre)</source>
+    <target>左键单击：放置起点（Ctrl = 自由位置）</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le point final (Ctrl = position libre) ; clic droit : annuler</source>
+    <target>左键单击：放置终点（Ctrl = 自由位置）；右键单击：取消</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le premier coin (Ctrl = point central, position libre)</source>
+    <target>左键单击：放置第一个角（Ctrl = 中心点，自由位置）</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le premier point (Ctrl = position libre)</source>
+    <target>左键单击：放置第一个点（Ctrl = 自由位置）</target>
+</phrase>
+<phrase>
+    <source>Clic: point anguleux. Cliquer-glisser: point courbe. Clic sur le premier point: fermer. Échap/Entrée: terminer. Clic droit: annuler le dernier point.</source>
+    <target>单击：角点。单击拖动：曲线点。单击第一个点：闭合。Esc/Enter：结束。右键：撤销上一个点。</target>
+</phrase>
+<phrase>
+    <source>Cliquer</source>
+    <target>单击</target>
+</phrase>
+<phrase>
+    <source>Cliquer : mode %1</source>
+    <target>单击：%1 模式</target>
+</phrase>
+<phrase>
+    <source>Cliquez pour choisir une couleur</source>
+    <target>点击选择颜色</target>
+</phrase>
+<phrase>
+    <source>Cliquez sur l&apos;image pour ajouter une couleur. Ajustez la tolérance de chaque couleur avec son curseur, ou cliquez sur × pour la retirer.</source>
+    <target>单击图像以添加颜色。使用滑块调整每种颜色的容差，或单击 × 将其移除。</target>
+</phrase>
+<phrase>
+    <source>Cliquez sur l&apos;image pour choisir une couleur</source>
+    <target>单击图像选择颜色</target>
+</phrase>
+<phrase>
+    <source>Coins arrondis</source>
+    <target>圆角</target>
+</phrase>
+<phrase>
+    <source>Composant 1</source>
+    <target>元件1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Composant 2</source>
+    <target>元件2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Convertir %1 en courbe de Bézier</source>
+    <target>将 %1 转换为贝塞尔曲线</target>
+</phrase>
+<phrase>
+    <source>Convertir %1 en polyligne</source>
+    <target>将 %1 转换为多段线</target>
+</phrase>
+<phrase>
+    <source>Convertir en courbe de Bézier</source>
+    <target>转换为贝塞尔曲线</target>
+</phrase>
+<phrase>
+    <source>Convertir en polyligne</source>
+    <target>转换为多段线</target>
+</phrase>
+<phrase>
+    <source>Couleur transparente</source>
+    <target>透明色</target>
+</phrase>
+<phrase>
+    <source>Couleur transparente...</source>
+    <target>透明色...</target>
+</phrase>
+<phrase>
+    <source>Courant nominal</source>
+    <target>额定电流</target>
+</phrase>
+<phrase>
+    <source>Deplacer le centre de rotation</source>
+    <target>移动旋转中心</target>
+</phrase>
+<phrase>
+    <source>Distance in pixels between the label and the slave cross reference</source>
+    <target>标签与从站交叉引用之间的像素距离</target>
+</phrase>
+<phrase>
+    <source>Distance label - slave :</source>
+    <target>标签距离 - 从站：</target>
+</phrase>
+<phrase>
+    <source>Définir une couleur transparente</source>
+    <target>设置透明色</target>
+</phrase>
+<phrase>
+    <source>Déformer une courbe</source>
+    <target>变形曲线</target>
+</phrase>
+<phrase>
+    <source>Déplacer le centre de rotation d&apos;une image</source>
+    <target>移动图像的旋转中心</target>
+</phrase>
+<phrase>
+    <source>Déverrouillé : largeur et hauteur peuvent être modifiées indépendamment. Cliquer pour verrouiller.</source>
+    <target>已解锁：宽度和高度可独立修改。单击锁定。</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image d&apos;origine sous...</source>
+    <target>原始图像另存为...</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image sous...</source>
+    <target>图像另存为...</target>
+</phrase>
+<phrase>
+    <source>Erreur</source>
+    <target>错误</target>
+</phrase>
+<phrase>
+    <source>Exclure de la nomenclature</source>
+    <target>从物料清单中排除</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter %1</source>
+    <target>旋转 %1</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter une image</source>
+    <target>旋转图像</target>
+</phrase>
+<phrase>
+    <source>Faites glisser les poignées, ou l&apos;intérieur du cadre, pour ajuster la zone à conserver.</source>
+    <target>拖动控制柄或框内区域，调整要保留的区域。</target>
+</phrase>
+<phrase>
+    <source>Fil</source>
+    <target>导线</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Folio</source>
+    <target>图页</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Forme fermée</source>
+    <target>闭合形状</target>
+</phrase>
+<phrase>
+    <source>Glisser %1 : rotation (Maj = 15°)</source>
+    <target>拖动 %1：旋转（Shift = 15°）</target>
+</phrase>
+<phrase>
+    <source>Glisser : ajuster l&apos;arc (Ctrl = position libre, Maj = 15°)</source>
+    <target>拖动：调整圆弧（Ctrl = 自由位置，Shift = 15°）</target>
+</phrase>
+<phrase>
+    <source>Glisser : arrondir les coins (Ctrl = position libre)</source>
+    <target>拖动：圆角（Ctrl = 自由位置）</target>
+</phrase>
+<phrase>
+    <source>Glisser : déformer la courbe (Ctrl = position libre, Alt = briser la tangente)</source>
+    <target>拖动：变形曲线（Ctrl = 自由位置，Alt = 断开切线）</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer ce point</source>
+    <target>拖动：移动此点</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer le centre de rotation</source>
+    <target>拖动：移动旋转中心</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer le point (Ctrl = position libre</source>
+    <target>拖动：移动点（Ctrl = 自由位置</target>
+</phrase>
+<phrase>
+    <source>Glisser : inclinaison (Ctrl = position libre, Maj = 15°)</source>
+    <target>拖动：倾斜（Ctrl = 自由位置，Shift = 15°）</target>
+</phrase>
+<phrase>
+    <source>Glisser : incliner (Maj = par pas de 15°)</source>
+    <target>拖动：倾斜（Shift = 以 15° 为步长）</target>
+</phrase>
+<phrase>
+    <source>Glisser : pivoter (Maj = par pas de 15°)</source>
+    <target>拖动：旋转（Shift = 以 15° 为步长）</target>
+</phrase>
+<phrase>
+    <source>Glisser : redimensionner (Ctrl = depuis le centre + position libre, Maj = proportions</source>
+    <target>拖动：调整大小（Ctrl = 从中心 + 自由位置，Shift = 比例</target>
+</phrase>
+<phrase>
+    <source>Glisser : redimensionner (Maj = conserver les proportions, Ctrl = depuis le centre)</source>
+    <target>拖动：调整大小（Shift = 保持比例，Ctrl = 从中心）</target>
+</phrase>
+<phrase>
+    <source>Glisser : repositionner le centre de rotation (Ctrl = position libre)</source>
+    <target>拖动：重新定位旋转中心（Ctrl = 自由位置）</target>
+</phrase>
+<phrase>
+    <source>Glisser : rotation (Ctrl = position libre, Maj = 15°)</source>
+    <target>拖动：旋转（Ctrl = 自由位置，Shift = 15°）</target>
+</phrase>
+<phrase>
+    <source>Glisser le point violet : arrondir les coins</source>
+    <target>拖动紫色点：圆角</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin : pivoter (Maj = par pas de 15°) ; glisser un bord : incliner (Maj = par pas de 15°) ; point rouge : déplacer le centre de rotation</source>
+    <target>拖动角：旋转（Shift = 以 15° 为步长）；拖动边：倾斜（Shift = 以 15° 为步长）；红点：移动旋转中心</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin/bord : redimensionner (Ctrl = depuis le centre, Maj = conserver les proportions)</source>
+    <target>拖动角/边：调整大小（Ctrl = 从中心，Shift = 保持比例）</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin/bord : redimensionner (Ctrl = depuis le centre, Maj = proportions, Alt = détacher en polyligne)</source>
+    <target>拖动角/边：调整大小（Ctrl = 从中心，Shift = 比例，Alt = 分离为多段线）</target>
+</phrase>
+<phrase>
+    <source>Glisser un point : le déplacer</source>
+    <target>拖动点：移动它</target>
+</phrase>
+<phrase>
+    <source>Glisser une extrémité : la déplacer</source>
+    <target>拖动端点：移动它</target>
+</phrase>
+<phrase>
+    <source>Glisser une poignée ou la courbe : déformer (Alt = briser la tangente) ; Alt+glisser un point anguleux : créer des poignées ; clic droit : menu du nœud le plus proche</source>
+    <target>拖动控制柄或曲线：变形（Alt = 断开切线）；Alt+拖动角点：创建控制柄；右键单击：最近节点菜单</target>
+</phrase>
+<phrase>
+    <source>Géométrie</source>
+    <target>几何</target>
+</phrase>
+<phrase>
+    <source>Hauteur</source>
+    <target>高度</target>
+</phrase>
+<phrase>
+    <source>Image BMP (*.bmp)</source>
+    <target>BMP 图像 (*.bmp)</target>
+</phrase>
+<phrase>
+    <source>Image Files (*.png *.jpg *.jpeg *.bmp *.svg)</source>
+    <target>图像文件 (*.png *.jpg *.jpeg *.bmp *.svg)</target>
+</phrase>
+<phrase>
+    <source>Image JPEG (*.jpg *.jpeg)</source>
+    <target>JPEG 图像 (*.jpg *.jpeg)</target>
+</phrase>
+<phrase>
+    <source>Image PNG (*.png)</source>
+    <target>PNG 图像 (*.png)</target>
+</phrase>
+<phrase>
+    <source>Image source</source>
+    <target>源图像</target>
+</phrase>
+<phrase>
+    <source>Image SVG (*.svg)</source>
+    <target>SVG 图像 (*.svg)</target>
+</phrase>
+<phrase>
+    <source>Images non incluses dans l&apos;export DXF</source>
+    <target>图像未包含在 DXF 导出中</target>
+    <definition>message box title</definition>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer l&apos;image à cet emplacement.</source>
+    <target>无法将图像保存到该位置。</target>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer la nomenclature dans %1.
+%2</source>
+    <target>无法将物料清单保存到 %1。
+%2</target>
+</phrase>
+<phrase>
+    <source>Impossible de charger l&apos;image.</source>
+    <target>无法加载图像。</target>
+</phrase>
+<phrase>
+    <source>Inclinaison X</source>
+    <target>X 倾斜</target>
+</phrase>
+<phrase>
+    <source>Inclinaison Y</source>
+    <target>Y 倾斜</target>
+</phrase>
+<phrase>
+    <source>Incliner %1</source>
+    <target>倾斜 %1</target>
+</phrase>
+<phrase>
+    <source>Incliner une image</source>
+    <target>倾斜图像</target>
+</phrase>
+<phrase>
+    <source>La limite fixée pour cet élément maître est atteinte (Limite: %1).
+
+Voulez-vous tout de même lier ce contact esclave ?</source>
+    <target>已达到此主元件的限制（限制：%1）。
+
+是否仍要链接此从属触点？</target>
+</phrase>
+<phrase>
+    <source>Largeur</source>
+    <target>宽度</target>
+</phrase>
+<phrase>
+    <source>Le format DXF utilisé ici (AC1006) ne permet pas d&apos;inclure d&apos;image. Les images seront représentées uniquement par un rectangle de contour (position, taille, rotation et inclinaison conservées), sans le contenu de l&apos;image.</source>
+    <target>此处使用的 DXF 格式 (AC1006) 无法包含图像。图像将仅以轮廓矩形表示（保留位置、大小、旋转和倾斜），不包含图像内容。</target>
+    <definition>message box content</definition>
+</phrase>
+<phrase>
+    <source>Lisse</source>
+    <target>平滑</target>
+</phrase>
+<phrase>
+    <source>Liste de câblage</source>
+    <target>接线列表</target>
+    <definition>window title</definition>
+</phrase>
+<phrase>
+    <source>Liste de câblage (base de données)</source>
+    <target>接线列表（数据库）</target>
+</phrase>
+<phrase>
+    <source>Longueur</source>
+    <target>长度</target>
+</phrase>
+<phrase>
+    <source>margin: 5px; font-weight: bold;</source>
+    <target>margin: 5px; font-weight: bold;</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal</source>
+    <target>水平镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal d&apos;une image</source>
+    <target>图像水平镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal de %1</source>
+    <target>%1 的水平镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir impossible : inclinaison trop extrême pour cette forme</source>
+    <target>无法镜像：此形状的倾斜过于极端</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical</source>
+    <target>垂直镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical d&apos;une image</source>
+    <target>图像垂直镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical de %1</source>
+    <target>%1 的垂直镜像</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;un arc</source>
+    <target>修改弧的角度</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;une forme</source>
+    <target>修改形状角度</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;une image</source>
+    <target>修改图像角度</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;inclinaison d&apos;une image</source>
+    <target>修改图像倾斜</target>
+</phrase>
+<phrase>
+    <source>Modifier la courbure d&apos;%1</source>
+    <target>修改%1的曲率</target>
+</phrase>
+<phrase>
+    <source>Modifier la forme d&apos;%1</source>
+    <target>修改%1的形状</target>
+</phrase>
+<phrase>
+    <source>Modifier la hauteur d&apos;une image</source>
+    <target>修改图像高度</target>
+</phrase>
+<phrase>
+    <source>Modifier la largeur d&apos;une image</source>
+    <target>修改图像宽度</target>
+</phrase>
+<phrase>
+    <source>Modifier la longueur d&apos;une ligne</source>
+    <target>修改线条长度</target>
+</phrase>
+<phrase>
+    <source>Modifier la taille d&apos;une forme</source>
+    <target>修改形状大小</target>
+</phrase>
+<phrase>
+    <source>Modifier le type d&apos;un nœud</source>
+    <target>修改节点类型</target>
+</phrase>
+<phrase>
+    <source>Modifier une image</source>
+    <target>修改图像</target>
+</phrase>
+<phrase>
+    <source>Modèle</source>
+    <target>型号</target>
+</phrase>
+<phrase>
+    <source>Nombre maximum de contacts esclaves définis : non défini
+</source>
+    <target>已定义的从属触点最大数量：未定义
+</target>
+</phrase>
+<phrase>
+    <source>Notes</source>
+    <target>备注</target>
+</phrase>
+<phrase>
+    <source>Nœud le plus proche</source>
+    <target>最近节点</target>
+</phrase>
+<phrase>
+    <source>pivoter/incliner</source>
+    <target>旋转/倾斜</target>
+</phrase>
+<phrase>
+    <source>Rayon X</source>
+    <target>X半径</target>
+</phrase>
+<phrase>
+    <source>Rayon Y</source>
+    <target>Y半径</target>
+</phrase>
+<phrase>
+    <source>redimensionner</source>
+    <target>调整大小</target>
+</phrase>
+<phrase>
+    <source>Redimensionner %1</source>
+    <target>调整 %1 大小</target>
+</phrase>
+<phrase>
+    <source>Redimensionner une image</source>
+    <target>调整图像大小</target>
+</phrase>
+<phrase>
+    <source>Remplacer l&apos;image...</source>
+    <target>替换图像...</target>
+</phrase>
+<phrase>
+    <source>Remplacer une image</source>
+    <target>替换图像</target>
+</phrase>
+<phrase>
+    <source>Restaurer les proportions</source>
+    <target>恢复比例</target>
+</phrase>
+<phrase>
+    <source>Restaurer les proportions d&apos;une image</source>
+    <target>恢复图像比例</target>
+</phrase>
+<phrase>
+    <source>Retirer cette couleur</source>
+    <target>移除此颜色</target>
+</phrase>
+<phrase>
+    <source>Revenir à l&apos;image complète, sans rognage</source>
+    <target>恢复为完整图像，不裁剪</target>
+</phrase>
+<phrase>
+    <source>rgb(%1, %2, %3)</source>
+    <target>rgb(%1, %2, %3)</target>
+</phrase>
+<phrase>
+    <source>Rogner l&apos;image</source>
+    <target>裁剪图像</target>
+</phrase>
+<phrase>
+    <source>Rogner une image</source>
+    <target>裁剪图像</target>
+</phrase>
+<phrase>
+    <source>Rogner...</source>
+    <target>裁剪...</target>
+</phrase>
+<phrase>
+    <source>Rotation/Inclinaison</source>
+    <target>旋转/倾斜</target>
+</phrase>
+<phrase>
+    <source>Réinitialiser</source>
+    <target>重置</target>
+</phrase>
+<phrase>
+    <source>Selectionner une image...</source>
+    <target>选择图像...</target>
+</phrase>
+<phrase>
+    <source>Supprimer le nœud le plus proche</source>
+    <target>删除最近节点</target>
+</phrase>
+<phrase>
+    <source>Supprimer un point d&apos;une courbe</source>
+    <target>从曲线删除点</target>
+</phrase>
+<phrase>
+    <source>Symétrique</source>
+    <target>对称</target>
+</phrase>
+<phrase>
+    <source>Séparation de potentiel</source>
+    <target>电位分隔</target>
+</phrase>
+<phrase>
+    <source>Taille</source>
+    <target>大小</target>
+</phrase>
+<phrase>
+    <source>Tension nominale</source>
+    <target>额定电压</target>
+</phrase>
+<phrase>
+    <source>Tolérance pour cette couleur</source>
+    <target>此颜色的容差</target>
+</phrase>
+<phrase>
+    <source>Tous les fichiers (*)</source>
+    <target>所有文件 (*)</target>
+</phrase>
+<phrase>
+    <source>Transformer %1</source>
+    <target>变换 %1</target>
+</phrase>
+<phrase>
+    <source>Transparence non conservée</source>
+    <target>不保留透明度</target>
+</phrase>
+<phrase>
+    <source>un arc</source>
+    <target>一段弧</target>
+</phrase>
+<phrase>
+    <source>un coin</source>
+    <target>一个角</target>
+</phrase>
+<phrase>
+    <source>un point</source>
+    <target>一个点</target>
+</phrase>
+<phrase>
+    <source>une courbe</source>
+    <target>一条曲线</target>
+</phrase>
+<phrase>
+    <source>une extrémité</source>
+    <target>一个端点</target>
+</phrase>
+<phrase>
+    <source>une image</source>
+    <target>一张图像</target>
+    <definition>part of a sentence listing the content of a diagram</definition>
+</phrase>
+<phrase>
+    <source>Verrouiller la numérotation automatique</source>
+    <target>锁定自动编号</target>
+</phrase>
+<phrase>
+    <source>Verrouiller la position</source>
+    <target>锁定位置</target>
+</phrase>
+<phrase>
+    <source>Verrouillé : modifier la largeur ou la hauteur ajuste l&apos;autre pour conserver les proportions. Cliquer pour déverrouiller.</source>
+    <target>已锁定：修改宽度或高度会调整另一个以保持比例。单击解锁。</target>
+</phrase>
+<phrase>
+    <source>Échec de l&apos;enregistrement</source>
+    <target>保存失败</target>
+</phrase>
+<phrase>
+    <source>Édition des nœuds</source>
+    <target>节点编辑</target>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>机柜</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>线圈</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>端子</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>端子排</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>电缆</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>额定值</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>标题栏</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>符号库</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>导线</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>触点</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>接触器</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>电流</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>断路器</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>文件夹</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>元件</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>从</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>熔断器</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>网格</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>开关</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>主</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>模板</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>电动机</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>中性线</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>物料清单</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>编号</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>相</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>电位</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>项目</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>功率</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>继电器</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>图纸交叉引用</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>标识</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>图纸交叉引用</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>原理图</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>截面积</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>目录</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>电压</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>接地</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>文本</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>变压器</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

misc/make_icon_themes.py

@@ -34,6 +34,16 @@ expects, so QIcon::fromTheme("name") finds them. The dark theme only holds
 the icons that need a dark variant: black line art. Colored icons are not
 touched; the dark theme inherits them from the light one.
 
+Qt inherits by name, not by size: once a name has any file in the dark
+theme, the parent theme is never consulted for that name, and a size the
+dark theme lacks is served by scaling the nearest dark file. An icon that
+is line art at 22 pixels and colored at 128 (the printer) would then come
+out as the 22 pixel copy scaled up on a dark palette. So for every name
+the dark theme holds, the .qrc also aliases the light files of the sizes
+the dark theme does not have, when they read on the dark window (3:1,
+measured as tests/qttest/tst_qeticons.cpp does); a light file that does
+not is left out, and Qt scales the nearest dark copy as before.
+
 An icon counts as line art when fewer than 20% of its visible pixels are
 saturated. Its dark copy keeps hue and alpha and inverts lightness, scaled
 so pure black becomes (220, 220, 220), the dark palette's text color.
@@ -101,6 +111,8 @@ WHITE_LIGHTNESS = 0.85      # a visible pixel this light counts as white
 WHITE_FRACTION = 0.30       # at or above this an icon is "light art"
 INK = 220 / 255.0           # lightness of pure black after inversion
 SVG_INK = "#dcdcdc"
+DARK_WINDOW = (53, 53, 53)  # QET::Palette::fusionDark() window color
+DARK_RATIO = 3.0            # what tst_qeticons requires of a dark theme file
 
 
 def visible_pixels(image):
@@ -131,6 +143,28 @@ def has_light_fill(image):
     return white / len(pixels) >= WHITE_FRACTION
 
 
+def relative_luminance(rgb):
+    def linear(c):
+        c /= 255.0
+        return c / 12.92 if c <= 0.03928 else ((c + 0.055) / 1.055) ** 2.4
+    r, g, b = rgb
+    return 0.2126 * linear(r) + 0.7152 * linear(g) + 0.0722 * linear(b)
+
+
+def reads_on_dark(image):
+    """True when the icon's mean visible color reaches DARK_RATIO against
+    the dark window, the test tst_qeticons applies to every dark file."""
+    pixels = visible_pixels(image)
+    if not pixels:
+        return False
+    n = len(pixels)
+    mean = (sum(p[0] for p in pixels) // n, sum(p[1] for p in pixels) // n,
+            sum(p[2] for p in pixels) // n)
+    lighter, darker = sorted((relative_luminance(mean), relative_luminance(DARK_WINDOW)),
+                             reverse=True)
+    return (lighter + 0.05) / (darker + 0.05) >= DARK_RATIO
+
+
 def invert_lightness(image):
     """Invert lightness, keeping hue, saturation and alpha.
 
@@ -240,6 +274,20 @@ def main():
         changed += write_if_changed(target, text)
         dark.append(f"themes/qet-dark/scalable/{name}")
 
+    # Complete each dark name with the light files of its other sizes
+    # that read on a dark window (see the module docstring): aliases, no
+    # copies.
+    dark_sizes = {}
+    for path in dark:
+        size, name = path.split("/")[2:]
+        dark_sizes.setdefault(name, set()).add(size)
+    dark_aliases = []
+    for alias, source in light:
+        size, name = alias.split("/")[2:]
+        if name in dark_sizes and size not in dark_sizes[name] \
+                and reads_on_dark(Image.open(ICO / source).convert("RGBA")):
+            dark_aliases.append((f"themes/qet-dark/{size}/{name}", source))
+
     # Drop dark files from an earlier run that are no longer generated, so
     # a reclassified icon falls back to the light theme instead of keeping
     # a stale copy.
@@ -264,6 +312,8 @@ def main():
         qrc.append(f'        <file alias="{alias}">{source}</file>')
     for path in dark:
         qrc.append(f"        <file>{path}</file>")
+    for alias, source in dark_aliases:
+        qrc.append(f'        <file alias="{alias}">{source}</file>')
     qrc += ["    </qresource>", "</RCC>", ""]
     changed += write_if_changed(QRC, "\n".join(qrc))
 

misc/qet-mcp/README.md

@@ -0,0 +1,349 @@
+# qet-mcp — a Model Context Protocol server for QElectroTech projects
+
+A small stdio MCP server that lets an AI assistant read and verify
+QElectroTech projects: what is in a project, what an edit actually
+changed, and what a whole corpus of projects contains.
+
+It has **no third-party dependencies** — Python 3.9+ and the standard
+library only. The MCP SDK is not required.
+
+## Why
+
+Verifying a change by screenshot is unreliable, and this tool exists
+because that unreliability produced two wrong conclusions in one review
+session:
+
+- A drag of a multi-element selection *looked* like it had left the
+  symbols behind and detached their labels. Diffing the saved file showed
+  all four elements had moved by an identical `(0, -80)` and **no label
+  had moved at all**. A bug report was one step away from being filed.
+- An "Apply" button *looked* like it did nothing. It was disabled,
+  because a required field was empty.
+
+Both times the pixels misled and the model told the truth. So the tools
+here read the model.
+
+## Tools
+
+| Tool | What it answers |
+|---|---|
+| `qet_project_info` | title, format version, folios, element and conductor counts |
+| `qet_elements` | placed elements: uuid, type, position, label, information bag |
+| `qet_conductors` | conductors and their documentation fields; filter by attribute |
+| `qet_diff` | **what an edit actually changed** — element moves, adds, removes, relabels; conductor changes; and folio fields, texts, shapes, images, symbol text fields and terminal strips |
+| `qet_scan` | sweep a directory of projects, counting nodes carrying an attribute |
+| `qet_element_info` | a `.elmt`: translated names, terminals, info fields, part counts |
+| `qet_export` | run a headless export (pdf, png, svg, bom, cables, wires, wiring, nets, links, info) |
+| `qet_edit` | **change a project** — place, move, rotate, label, wire, number, cross-reference, add text, shapes and images, restyle a symbol's text fields, delete; then diff the result |
+| `qet_element_build` | **author a `.elmt`** — draw a new symbol, with terminals to wire it by |
+| `qet_project_new` | **start from nothing** — an empty project with a title and folios |
+| `qet_element_search` | **find a symbol** in a collection by name (any language), type or terminal count |
+| `qet_check` | **design-rule checks** — duplicate labels, unlabelled masters, unnumbered conductors, empty folios |
+| `qet_query` | **ask the project database** — read-only SQL over the views and tables |
+
+`qet_export` and `qet_edit` launch QElectroTech. Everything else parses the
+file directly, which is faster, needs no display, and cannot be confused by
+a dialog.
+
+## Running it
+
+```bash
+# list the tools and exit
+misc/qet-mcp/qet_mcp.py --list
+
+# speak MCP on stdin/stdout
+misc/qet-mcp/qet_mcp.py
+```
+
+Register it with an MCP client, for example:
+
+```json
+{
+  "mcpServers": {
+    "qet": {
+      "command": "python3",
+      "args": ["/path/to/qelectrotech/misc/qet-mcp/qet_mcp.py"],
+      "env": {
+        "QET_MCP_WORKSPACE": "/home/you/drawings",
+        "QET_ENABLE_SCRIPTING": "1"
+      }
+    }
+  }
+}
+```
+
+## Five tools need scripting switched on
+
+A QElectroTech with JavaScript scripting switched off refuses `--run`, and
+off is the default from
+[#984](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/984)
+onwards. Five tools here drive it that way and stop working until it is
+turned on:
+
+| | |
+|---|---|
+| need `QET_ENABLE_SCRIPTING=1` | `qet_query`, `qet_continuity`, `qet_check`, `qet_project_new`, `qet_edit` |
+| unaffected | everything else — they read the `.qet` directly, or, in `qet_export`'s case, use a plain CLI flag |
+
+The variable goes in the environment this server is started in, which for an
+MCP client is the `env` block above; the server passes its environment
+straight through to QElectroTech. It does not set the variable itself, on
+purpose — a switch a program turns on for itself is not a switch. Whoever
+configured this server and pointed it at a QElectroTech binary made that
+choice, and their interactive QElectroTech keeps whatever its own setting
+says.
+
+Without it, those five come back `"ok": false` with a `hint` naming the
+variable. Older builds, from before the setting existed, need nothing.
+
+## What the server is allowed to touch
+
+Every path in a tool call is chosen by the model, so without a policy this
+server would be a read/write primitive for anything the operating system
+lets the process reach: read any project on the disk, export one somewhere
+else, overwrite an unrelated file, embed an arbitrary local image or PDF.
+
+So **data paths are confined to a workspace**:
+
+| | |
+|---|---|
+| `QET_MCP_WORKSPACE` | the directories tool calls may read and write, separated by `:` (`;` on Windows) |
+| unset | the directory the server was started in |
+| `QET_MCP_ALLOW_ANY_PATH=1` | turns the check off entirely |
+
+Set the workspace to the folder your drawings live in. A path outside it is
+refused with an error naming what was allowed; symlinks are resolved first,
+so a link planted inside the workspace is judged by where it points.
+
+Two arguments are deliberately **not** confined: `binary` (the
+`qelectrotech` executable) and `elements_dir` (the element collection).
+Those are configuration, chosen once by whoever runs the server, and both
+normally live in `/usr` or a build tree — outside any sensible workspace.
+Confining them would reject the ordinary case while stopping nothing.
+
+`QET_MCP_ALLOW_ANY_PATH=1` is equivalent to granting the client local
+filesystem access with this process's privileges. It exists so that is a
+deliberate choice rather than the default.
+
+**Nothing is overwritten unasked.** `qet_export`, `qet_edit`,
+`qet_project_new` and `qet_element_build` refuse an `output` that already
+exists unless the call passes `"overwrite": true`. Replacing a file is the
+one step this server cannot undo, so it is the one step it will not take on
+its own.
+
+The confinement is applied where tool arguments enter the server, not inside
+each tool. Importing `qet_mcp` and calling `tool_export()` from your own
+Python is not confined and is not meant to be — that is your code calling a
+library, and you already chose the paths.
+
+## Worked examples
+
+**What did that edit change?**
+
+```json
+{"name": "qet_diff", "arguments": {"before": "a.qet", "after": "b.qet"}}
+```
+
+```json
+"elements": { "moved_count": 4,
+              "distinct_move_deltas": [[0.0, -80.0]],
+              "relabelled": [], "info_changed": [] }
+```
+
+Four elements moved by one uniform delta; nothing was relabelled. That is
+the answer a screenshot gave wrongly.
+
+**Draw something, and check it landed**
+
+```json
+{"name": "qet_edit", "arguments": {
+  "binary": "/path/to/qelectrotech",
+  "project": "in.qet", "output": "out.qet",
+  "elements_dir": "/path/to/qelectrotech/elements",
+  "operations": [
+    {"op": "add_folio", "id": "f"},
+    {"op": "set_folio_title", "folio": "$f", "title": "Starter"},
+    {"op": "add_element", "id": "k1", "folio": "$f", "path": "common://.../coil.elmt", "x": 100, "y": 100},
+    {"op": "add_element", "id": "k2", "folio": "$f", "path": "common://.../coil.elmt", "x": 320, "y": 100},
+    {"op": "add_conductor", "folio": "$f", "from": "$k1", "from_terminal": 0, "to": "$k2", "to_terminal": 0},
+    {"op": "set_conductor", "folio": "$f", "element": "$k1", "terminal": 0, "property": "num", "value": "W7"},
+    {"op": "set_label", "folio": "$f", "element": "$k1", "label": "KM1"}
+  ]}}
+```
+
+An op that creates something takes an `"id"`; later ops name it as `"$id"`.
+Terminals are addressed by index — top to bottom, then left to right, **not**
+the order the `.elmt` lists them. `qet_element_info` and `qet_element_search`
+both report that index order. The answer carries a per-operation result
+*and* a `qet_diff`, because "addConductor → true" says the call was
+accepted, not that the file came out right:
+
+```json
+"diff": {"elements":   {"before": 11, "after": 13, "added": ["{0aa3…}", "{6f63…}"]},
+         "conductors": {"before": 47, "after": 48, "added": ["4:{0aa3…}/{2904…}--{6f63…}/{2904…}"],
+                        "removed": []}}
+```
+
+**Draw a symbol that does not exist yet**
+
+```json
+{"name": "qet_element_build", "arguments": {
+  "output": "/path/to/collection/99_custom/my_resistor.elmt",
+  "names": {"en": "Test resistor", "fr": "Résistance de test"},
+  "parts": [
+    {"type": "rect", "x": -10, "y": -20, "width": 20, "height": 40},
+    {"type": "line", "x1": 0, "y1": -30, "x2": 0, "y2": -20},
+    {"type": "line", "x1": 0, "y1": 20,  "x2": 0, "y2": 30},
+    {"type": "text", "x": 14, "y": -4, "text": "R"}
+  ],
+  "terminals": [{"x": 0, "y": -30, "orientation": "n", "name": "1"},
+                {"x": 0, "y": 30,  "orientation": "s", "name": "2"}]}}
+```
+
+Then place it with `qet_edit` like any catalogue element. Unlike a
+project, a `.elmt` is not rewritten by QElectroTech on a round trip, so
+generating one here is safe in a way that generating a `.qet` would not
+be — there is no `toXml()` waiting to drop what this writer did not know
+to emit.
+
+**Ask a question the XML cannot answer**
+
+```json
+{"name": "qet_query", "arguments": {
+  "binary": "/path/to/qelectrotech", "project": "industrial.qet",
+  "sql": "SELECT label, COUNT(*) AS n FROM element_nomenclature_view WHERE label <> '' GROUP BY label HAVING n > 1 ORDER BY n DESC"}}
+```
+
+```json
+"rows": [{"label": "V6", "n": 7}, {"label": "V5", "n": 6}, {"label": "V4", "n": 6}]
+```
+
+Duplicate element labels in a shipped example — a design-rule question,
+answered by the database that already knew it.
+
+**How much of a corpus uses a field?**
+
+```json
+{"name": "qet_scan",
+ "arguments": {"directory": "examples", "tag": "conductor", "attribute": "cable"}}
+```
+
+```json
+{ "files": 24, "total": 3190, "non_empty": 0, "distinct_values": [] }
+```
+
+Across the shipped examples: 3190 conductors, not one with a cable value.
+
+## Testing
+
+```bash
+python3 test_qet_mcp.py                      # unit + protocol, no QElectroTech needed
+QET_BINARY=/path/to/qelectrotech \
+QET_ELEMENTS=/path/to/qelectrotech/elements \
+QET_EXAMPLES=/path/to/qelectrotech/examples \
+QET_ENABLE_SCRIPTING=1 \
+    python3 test_qet_mcp.py                  # everything
+```
+
+`QET_ENABLE_SCRIPTING=1` matters from #984 onwards: without it the
+integration tests that drive QElectroTech through a script all fail, and
+they fail as "the edit did nothing" rather than as "scripting is off", which
+reads like a regression in the thing under test.
+
+176 tests in three layers: unit (validation, script generation, the terminal
+order rule, the diff, the part schema), the real stdio transport, and
+integration against a built QElectroTech. Several exist because the
+behaviour they pin was once wrong and looked right, and say so in their
+docstrings. To check the suite itself rather than trust it, each of those
+bugs was reintroduced in turn and the suite confirmed to fail: ten in the
+Python, plus the hang guard on `addConductor` and the database refresh in
+`ConductorCreator` in the C++.
+
+## Notes and limits
+
+- **The project database is reachable now, through `qet_query`.** It was
+  not when this server was written, which is why every other structural
+  tool here re-derives its answer from the XML. Prefer the views —
+  `element_nomenclature_view`, `project_summary_view`, `wiring_list_view`
+  — which exist to be queried; the underlying tables are how the cache is
+  arranged today and a column may move. Call `qet_query` with no `sql` to
+  list both. Only `SELECT` and `WITH` are accepted, which is the rule
+  QElectroTech applies to its own custom-query box, not one invented here.
+  An empty result and a failed query are told apart: `row_count` 0 with no
+  `error` means nothing matched, and a typo'd column name says so.
+- **`qet_export` isolates its launch.** SingleApplication keys its socket
+  on `applicationFilePath()`, so a second launch of the same binary path
+  forwards its request to an already-running instance and returns *that*
+  process's answer with no error. The tool copies the binary to a unique
+  temporary path, gives it a private `HOME`, and runs it on the offscreen
+  platform. A symlink would not work: `applicationFilePath()` resolves it
+  back to the real path.
+- **The CLI matches its flags exactly.** `--export-bom out.csv` is the
+  supported form; `--export-bom=out.csv` is not recognised as an export
+  at all, so the application starts its interface instead and a headless
+  run hangs. The tool uses the positional form.
+- **Conductor identity is the hard part of `qet_diff`.** A conductor names
+  its ends with `terminal1`/`terminal2`, and the project format has two
+  schemes: folio-scoped integer ids in older files, terminal-definition
+  uuids plus `element1`/`element2` in newer ones. The integer ids are
+  **renumbered on every save**, so keying on them — which this tool did at
+  first — made all 47 conductors of an untouched folio read as removed and
+  re-added the moment the other side had been through QElectroTech, which
+  is exactly what `qet_edit` produces. They are now keyed by owning element
+  uuid plus terminal, which is stable across a save: measured at 0 colliding
+  keys over 3190 conductors in the 24 shipped examples, and 0 churn on a
+  no-op edit. Where an element predates persisted uuids the end cannot be
+  resolved and keeps a `#`-marked unstable key; the diff then reports
+  `unstable_keys` and says so rather than pretending to be comparable.
+- **Texts, shapes and images have no uuid**, so `qet_diff` cannot say "the same
+  text, edited": an edited text reads as the old one removed and a new one
+  added, both shown. Shapes and images are keyed by position, so a restyle
+  or rescale *is* reported as a change to that item, but a move reads as a
+  removal plus an addition. The folio `version` attribute is left out of the
+  comparison on purpose: QElectroTech rewrites it on every save, and
+  including it made every folio of any re-saved project look edited.
+- **Elements** written before persisted uuids fall back to a positional key,
+  which makes a move in such a file read as a remove plus an add.
+- **`qet_edit` needs a build whose scripting API carries the drawing verbs.**
+  Against an older one it reports exactly which methods are missing and
+  changes nothing. `addElement` and the move/delete verbs shipped with the
+  scripting API; `addConductor`, `rotateElement`, `setElementLabel`,
+  `setElementInfo` and `setFolioTitle` are newer.
+- **`elements_dir` is not optional for `common://` paths.** The sandboxed
+  run has its own empty HOME, so QElectroTech falls back to the compiled-in
+  collection path, which on a machine that never ran `make install` does not
+  exist. The only symptom is `addElement` reporting that a file plainly
+  present "does not resolve to an element". An absolute `.elmt` path works
+  without it.
+- **`set_conductor` changes the whole potential, not one segment.** That is
+  what the application does — a wire number describes a potential — so name
+  a terminal carrying exactly one conductor and the change reaches every
+  conductor electrically joined to it. A terminal several conductors meet
+  at names none of them and is refused, so address a potential from one of
+  its leaves. Property names are the file's own, so `qet_conductors` reads
+  back exactly what was set.
+- **`link_elements` takes a folio for each end**, because a master and its
+  slave are normally on different folios. Whether a pair may be linked is
+  decided by QElectroTech's own `isLinkable()`, so a script cannot make a
+  link the GUI would refuse.
+- **An element must live inside a collection to be placeable.** This is
+  not about the path syntax: an absolute `.elmt` path works, but only if
+  the file sits under a directory QElectroTech knows as a collection.
+  Write it under the tree you pass as `elements_dir` and `qet_edit` can
+  place it, by absolute path or as `common://…`; write it anywhere else
+  and `add_element` reports only "does not resolve to an element".
+- **`qet_element_build` computes the `.elmt` size header, and checks it.**
+  `width`/`height`/`hotspot_x`/`hotspot_y` relate to the drawing by a
+  containment constraint, not a formula — the declared box runs from
+  `(-hotspot_x, -hotspot_y)` to `(width - hotspot_x, height - hotspot_y)`
+  and the drawing must fit inside it. The shipped collection shows authors
+  picking their own margins (one element pads 2 units left and 3 right,
+  another 8 and 2), so there is no convention to copy, only an invariant
+  to satisfy. A drawing that escaped its box is the classic way a
+  hand-written element renders clipped in the collection panel while
+  looking fine in XML.
+- **QElectroTech interrupts a script at 30 s** of its own accord, separately
+  from this tool's `timeout`. A very long operation list will hit that
+  first.
+- **`qet_edit` never writes the input.** It saves to a separate file and
+  diffs the two, so the original is always the thing the diff is against.

misc/qet-mcp/fixtures/plc_master_test.elmt

@@ -0,0 +1,44 @@
+<definition version="0.100.0" type="element" link_type="master" width="40" height="60" hotspot_x="17" hotspot_y="32">
+    <uuid uuid="{6d3714f6-a0e1-71b3-e4bd-5a35d4cbbec1}"/>
+    <names>
+        <name lang="ar">ملف KA  بمحتفظ مغناطيسي</name>
+        <name lang="ca">Bobina</name>
+        <name lang="cs">Bistabilní remanentní relé</name>
+        <name lang="de">Remanenzrelais</name>
+        <name lang="el">Πηνίο με μανδάλωση</name>
+        <name lang="en">Coil</name>
+        <name lang="es">Bobina KA de remanencia</name>
+        <name lang="fr">Bobine KA à rémanence</name>
+        <name lang="hu">Tekercs</name>
+        <name lang="it">Bobina</name>
+        <name lang="nl">spoel remanent</name>
+        <name lang="nl_BE">Spoel KA remanent</name>
+        <name lang="pl">Cewka przekaźnika remanencyjnego</name>
+        <name lang="pt_BR">Bobina</name>
+        <name lang="ru">Обмотка</name>
+        <name lang="zh">剩磁保持线圈</name>
+    </names>
+    <kindInformations>
+        <kindInformation name="type">plc</kindInformation>
+    </kindInformations>
+    <informations>Author: The QElectroTech team
+License: see http://qelectrotech.org/wiki/doc/elements_license</informations>
+    <description>
+        <rect x="14" y="-8" width="6" height="16" rx="0" ry="0" style="line-style:normal;line-weight:normal;filling:none;color:black" antialias="false"/>
+        <line x1="0" y1="-20" x2="0" y2="-8" end1="none" end2="none" length1="1.5" length2="1.5" style="line-style:normal;line-weight:normal;filling:none;color:black" antialias="false"/>
+        <dynamic_text x="2" y="11.33" z="5" text_width="-1" Halignment="AlignLeft" Valignment="AlignTop" frame="false" rotation="0" keep_visual_rotation="false" text_from="UserText" uuid="{647e33ed-520b-4d80-bbc4-7b31177b8f26}" font="Liberation Sans,4,-1,5,25,0,0,0,0,0,Regular">
+            <text>A2</text>
+        </dynamic_text>
+        <dynamic_text x="2" y="-24.67" z="6" text_width="-1" Halignment="AlignLeft" Valignment="AlignTop" frame="false" rotation="0" keep_visual_rotation="false" text_from="UserText" uuid="{fb1f8de9-70c0-4801-8dc7-12e6bf88d8f5}" font="Liberation Sans,4,-1,5,25,0,0,0,0,0,Regular">
+            <text>A1</text>
+        </dynamic_text>
+        <line x1="0" y1="8" x2="0" y2="20" end1="none" end2="none" length1="1.5" length2="1.5" style="line-style:normal;line-weight:normal;filling:none;color:black" antialias="false"/>
+        <dynamic_text x="30" y="-9.17" z="8" text_width="-1" Halignment="AlignLeft" Valignment="AlignTop" frame="false" rotation="0" keep_visual_rotation="false" text_from="ElementInfo" uuid="{b7fccfc3-05f1-459c-9766-f49a481bd0ff}" font="Liberation Sans,9,-1,5,50,0,0,0,0,0,Regular">
+            <text></text>
+            <info_name>label</info_name>
+        </dynamic_text>
+        <polygon x1="-14" y1="-8" x2="14" y2="-8" x3="20" y3="8" x4="-14" y4="8" antialias="false" style="line-style:normal;line-weight:normal;filling:none;color:black"/>
+        <terminal uuid="{6a87c921-6f5d-4f5c-8673-228a6d13c5c8}" name="A2" x="0" y="20" orientation="s" type="Generic"/>
+        <terminal uuid="{2904e5fa-6bbe-4127-acdd-f92feadd6ece}" name="A1" x="0" y="-20" orientation="n" type="Generic"/>
+    </description>
+</definition>

misc/qet-mcp/fixtures/plc_slave_test.elmt

@@ -0,0 +1,16 @@
+<definition version="0.100.0" type="element" link_type="slave" width="20" height="60" hotspot_x="9" hotspot_y="30">
+    <uuid uuid="{94d56f06-6814-5561-9148-2da3a9c4f900}"/>
+    <names>
+        <name lang="en">PLC Slave Test</name>
+    </names>
+    <kindInformations>
+        <kindInformation name="type">plc</kindInformation>
+        <kindInformation name="state">NO</kindInformation>
+        <kindInformation name="number">1</kindInformation>
+    </kindInformations>
+    <description>
+        <rect x="0" y="-8" width="6" height="16" rx="0" ry="0" style="line-style:normal;line-weight:normal;filling:none;color:black" antialias="false"/>
+        <terminal uuid="{6a87c921-6f5d-4f5c-8673-228a6d13c500}" name="1" x="0" y="20" orientation="s" type="Generic"/>
+        <terminal uuid="{2904e5fa-6bbe-4127-acdd-f92feadd6e00}" name="2" x="0" y="-20" orientation="n" type="Generic"/>
+    </description>
+</definition>

sources/ElementsCollection/elementscollectionmodel.cpp

@@ -49,6 +49,14 @@ ElementsCollectionModel::ElementsCollectionModel(QObject *parent) :
 */
 ElementsCollectionModel::~ElementsCollectionModel()
 {
+	// Without cancel(), the wait below runs the whole queued
+	// QtConcurrent::map() to completion, so closing this dialog on a
+	// large collection blocks until every remaining item has been
+	// processed -- a visible hang on the button pressed precisely to
+	// stop the work. cancel() drops the not-yet-started items so the
+	// wait that follows (still needed, so an in-flight item can't
+	// dereference this object after it's gone) is short.
+	m_future.cancel();
 	m_future.waitForFinished();
 }
 
@@ -431,7 +439,7 @@ void ElementsCollectionModel::addLocation(const ElementsLocation& location)
 											   collection_name);
 		}
 	}
-	// ANPASSUNG: Makros und Custom Collection werden hier behandelt!
+	// Macros and Custom Collection are handled here
 	else if (location.isCustomCollection() || location.isMacrosCollection()) {
 		QList <ElementCollectionItem *> child_list;
 
@@ -647,7 +655,7 @@ QModelIndex ElementsCollectionModel::indexFromLocation(
 		if (eci->type() == FileElementCollectionItem::Type) {
 			if (FileElementCollectionItem *feci = static_cast<FileElementCollectionItem *>(eci)) {
 
-				// ANPASSUNG: Makro-Prüfung hinzugefügt, damit das Modell den Pfad im Baum findet!
+				// Macro check added so the model finds the path in the tree
 				if ( (location.isCommonCollection() && feci->isCommonCollection()) ||
 					(location.isCompanyCollection() && feci->isCompanyCollection()) ||
 					(location.isMacrosCollection() && feci->isMacrosCollection()) ||

sources/ElementsCollection/elementslocation.cpp

@@ -653,9 +653,16 @@ QDomElement ElementsLocation::xml() const
 	if (!m_project)
 	{
 		QFile file (m_file_system_path);
+		if (!file.open(QIODevice::ReadOnly | QIODevice::Text))
+			return QDomElement();
+
 		QDomDocument docu;
 		if (docu.setContent(&file))
+		{
+			file.close();
 			return docu.documentElement();
+		}
+		file.close();
 	}
 	else
 	{

sources/ElementsCollection/elementslocation.h

@@ -20,7 +20,7 @@
 
 #include "../NameList/nameslist.h"
 #include "../diagramcontext.h"
-#include "pugixml/src/pugixml.hpp"
+#include "pugixml.hpp"
 
 #include <QIcon>
 #include <QString>

sources/ElementsCollection/fileelementcollectionitem.cpp

@@ -162,7 +162,7 @@ QString FileElementCollectionItem::localName()
 			else if (m_path == QETApp::customElementsDirN())
 				setText(QObject::tr("Collection utilisateur"));
 			else if (m_path == macrosPath)
-				setText(QObject::tr("Makros"));
+				setText(QObject::tr("Macros"));
 			else
 				setText(QObject::tr("Collection inconnue"));
 		}

sources/NameList/nameslist.h

@@ -17,7 +17,7 @@
 */
 #ifndef NAMES_LIST_H
 #define NAMES_LIST_H
-#include "pugixml/src/pugixml.hpp"
+#include "pugixml.hpp"
 
 #include <QtXml>
 /**

sources/TerminalStrip/UndoCommand/addterminaltostripcommand.cpp

@@ -35,13 +35,17 @@ AddTerminalToStripCommand::AddTerminalToStripCommand(QSharedPointer<RealTerminal
 	const auto t_label = terminal->label();
 	const auto ts_name = strip->name();
 
-	const auto str_1 = t_label.isEmpty() ? QObject::tr("Ajouter une borne") :
-									 QObject::tr("Ajouter la borne %1").arg(t_label);
-
-	const auto str_2 = ts_name.isEmpty() ? QObject::tr("à un groupe de bornes") :
-									 QObject::tr("au groupe de bornes %1").arg(ts_name);
-
-	setText(str_1 % " " % str_2);
+	QString text;
+	if (ts_name.isEmpty()) {
+		text = t_label.isEmpty()
+			? QObject::tr("Ajouter une borne à un groupe de bornes")
+			: QObject::tr("Ajouter la borne %1 à un groupe de bornes").arg(t_label);
+	} else {
+		text = t_label.isEmpty()
+			? QObject::tr("Ajouter une borne au groupe de bornes %1").arg(ts_name)
+			: QObject::tr("Ajouter la borne %1 au groupe de bornes %2").arg(t_label, ts_name);
+	}
+	setText(text);
 }
 
 AddTerminalToStripCommand::AddTerminalToStripCommand(QVector<QSharedPointer<RealTerminal>> terminals, TerminalStrip *strip, QUndoCommand *parent) :
@@ -50,14 +54,11 @@ AddTerminalToStripCommand::AddTerminalToStripCommand(QVector<QSharedPointer<Real
 	m_new_strip{strip}
 {
 	const auto ts_name = strip->name();
+	const auto count = m_terminal.size();
 
-	const auto str_1 = m_terminal.size() > 1 ? QObject::tr("Ajouter %1 bornes").arg(m_terminal.size()) :
-											   QObject::tr("Ajouter une borne");
-
-	const auto str_2 = ts_name.isEmpty() ? QObject::tr("à un groupe de bornes") :
-										  QObject::tr("au groupe de bornes %1").arg(ts_name);
-
-	setText(str_1 % " " % str_2);
+	setText(ts_name.isEmpty()
+		? QObject::tr("Ajouter %n borne(s) à un groupe de bornes", "", count)
+		: QObject::tr("Ajouter %n borne(s) au groupe de bornes %1", "", count).arg(ts_name));
 }
 
 
@@ -137,13 +138,11 @@ void RemoveTerminalFromStripCommand::redo()
 void RemoveTerminalFromStripCommand::setCommandTitle()
 {
 	const auto strip_name = m_strip->name();
+	const auto count = m_terminals.size();
 
-	const auto str_1 = m_terminals.size()>1 ? QObject::tr("Enlever %1 bornes").arg(m_terminals.size()):
-											  QObject::tr("Enlever une borne");
-
-	const auto str_2 = strip_name.isEmpty() ? QObject::tr("d'un groupe de bornes") :
-											  QObject::tr("du groupe de bornes %1").arg(strip_name);
-	setText(str_1 % " " % str_2);
+	setText(strip_name.isEmpty()
+		? QObject::tr("Enlever %n borne(s) d'un groupe de bornes", "", count)
+		: QObject::tr("Enlever %n borne(s) du groupe de bornes %1", "", count).arg(strip_name));
 }
 
 /**
@@ -166,19 +165,30 @@ MoveTerminalCommand::MoveTerminalCommand(QSharedPointer<PhysicalTerminal> termin
 			t_label.append(", ");
 		t_label.append(real_t->label());
 	}
+	const auto strip_name = old_strip->name();
+	const auto new_strip_name = new_strip->name();
 
-	auto strip_name = old_strip->name();
-	auto new_strip_name = new_strip->name();
-
-	auto str_1 = t_label.isEmpty() ? QObject::tr("Déplacer une borne") :
-									 QObject::tr("Déplacer la borne %1").arg(t_label);
-
-	auto str_2 = strip_name.isEmpty() ? QObject::tr(" d'un groupe de bornes") :
-										QObject::tr(" du groupe de bornes %1").arg(strip_name);
-
-	auto str_3 = new_strip_name.isEmpty() ? QObject::tr("vers un groupe de bornes") :
-											QObject::tr("vers le groupe de bornes %1").arg(new_strip_name);
-	setText(str_1 % " " % str_2 % " " % str_3);
+	QString text;
+	if (t_label.isEmpty()) {
+		if (strip_name.isEmpty() && new_strip_name.isEmpty())
+			text = QObject::tr("Déplacer une borne d'un groupe de bornes vers un autre groupe de bornes");
+		else if (strip_name.isEmpty())
+			text = QObject::tr("Déplacer une borne d'un groupe de bornes vers le groupe de bornes %1").arg(new_strip_name);
+		else if (new_strip_name.isEmpty())
+			text = QObject::tr("Déplacer une borne du groupe de bornes %1 vers un autre groupe de bornes").arg(strip_name);
+		else
+			text = QObject::tr("Déplacer une borne du groupe de bornes %1 vers le groupe de bornes %2").arg(strip_name, new_strip_name);
+	} else {
+		if (strip_name.isEmpty() && new_strip_name.isEmpty())
+			text = QObject::tr("Déplacer la borne %1 d'un groupe de bornes vers un autre groupe de bornes").arg(t_label);
+		else if (strip_name.isEmpty())
+			text = QObject::tr("Déplacer la borne %1 d'un groupe de bornes vers le groupe de bornes %2").arg(t_label, new_strip_name);
+		else if (new_strip_name.isEmpty())
+			text = QObject::tr("Déplacer la borne %1 du groupe de bornes %2 vers un autre groupe de bornes").arg(t_label, strip_name);
+		else
+			text = QObject::tr("Déplacer la borne %1 du groupe de bornes %2 vers le groupe de bornes %3").arg(t_label, strip_name, new_strip_name);
+	}
+	setText(text);
 }
 
 MoveTerminalCommand::MoveTerminalCommand(QVector<QSharedPointer<PhysicalTerminal>> terminals, TerminalStrip *old_strip,
@@ -191,17 +201,18 @@ MoveTerminalCommand::MoveTerminalCommand(QVector<QSharedPointer<PhysicalTerminal
 {
 	const auto strip_name = old_strip->name();
 	const auto new_strip_name = new_strip->name();
+	const auto count = m_terminal.size();
 
-	const auto str_1 = m_terminal.size() > 1 ? QObject::tr("Déplacer des bornes") :
-											   QObject::tr("Déplacer une borne");
-
-	const auto str_2 = strip_name.isEmpty() ? QObject::tr(" d'un groupe de bornes") :
-											  QObject::tr(" du groupe de bornes %1").arg(strip_name);
-
-	const auto str_3 = new_strip_name.isEmpty() ? QObject::tr("vers un groupe de bornes") :
-												  QObject::tr("vers le groupe de bornes %1").arg(new_strip_name);
-
-	setText(str_1 % " " % str_2 % " " % str_3);
+	QString text;
+	if (strip_name.isEmpty() && new_strip_name.isEmpty())
+		text = QObject::tr("Déplacer %n borne(s) d'un groupe de bornes vers un autre groupe de bornes", "", count);
+	else if (strip_name.isEmpty())
+		text = QObject::tr("Déplacer %n borne(s) d'un groupe de bornes vers le groupe de bornes %1", "", count).arg(new_strip_name);
+	else if (new_strip_name.isEmpty())
+		text = QObject::tr("Déplacer %n borne(s) du groupe de bornes %1 vers un autre groupe de bornes", "", count).arg(strip_name);
+	else
+		text = QObject::tr("Déplacer %n borne(s) du groupe de bornes %1 vers le groupe de bornes %2", "", count).arg(strip_name, new_strip_name);
+	setText(text);
 }
 
 void MoveTerminalCommand::undo()

sources/TerminalStrip/ui/freeterminaleditor.cpp

@@ -46,10 +46,11 @@ FreeTerminalEditor::FreeTerminalEditor(QETProject *project, QWidget *parent) :
         connect(m_project, &QObject::destroyed, this, &FreeTerminalEditor::reload);
     }
 
-		//Disabled the move if the table is currently edited (yellow cell)
-	connect(m_model, &FreeTerminalModel::dataChanged, this, [=] {
-		this->setDisabledMove();
-	});
+		//Disable the move button while cells are edited (yellow), re-evaluate on every change
+	connect(m_model, &FreeTerminalModel::dataChanged, this, &FreeTerminalEditor::selectionChanged);
+
+	connect(ui->m_table_view->selectionModel(), &QItemSelectionModel::selectionChanged,
+			this, &FreeTerminalEditor::selectionChanged);
 
 	connect(ui->m_table_view, &QAbstractItemView::doubleClicked, this, [=](const QModelIndex &index)
 	{
@@ -102,7 +103,7 @@ void FreeTerminalEditor::reload()
 			QString str(strip->installation() + " " + strip->location() + " " + strip->name());
 			ui->m_move_in_cb->addItem(str, strip->uuid());
 		}
-		setDisabledMove(false);
+		selectionChanged();
 	}
 }
 
@@ -273,10 +274,19 @@ void FreeTerminalEditor::on_m_move_pb_clicked()
 	reload();
 }
 
+void FreeTerminalEditor::selectionChanged()
+{
+	const bool has_selection = !ui->m_table_view->selectionModel()->selectedIndexes().isEmpty();
+	const bool has_pending   = !m_model->modifiedModelRealTerminalData().isEmpty();
+	setDisabledMove(!has_selection || has_pending);
+}
+
 void FreeTerminalEditor::setDisabledMove(bool b)
 {
 	ui->m_move_label->setDisabled(b);
 	ui->m_move_in_cb->setDisabled(b);
 	ui->m_move_pb->setDisabled(b);
+	ui->m_move_pb->setToolTip(b ? tr("Appliquez ou annulez les modifications en cours avant de déplacer")
+								: tr("Déplacer les bornes sélectionnées vers le bornier choisi"));
 }
 

sources/TerminalStrip/ui/freeterminalmodel.cpp

@@ -182,7 +182,7 @@ bool FreeTerminalModel::setData(const QModelIndex &index, const QVariant &value,
 		modified_ = true;
 		modified_cell = FUNCTION_CELL;
 	}
-	else if (column_ == LED_CELL)
+	else if (column_ == LED_CELL && mrtd.led_ != value.toBool())
 	{
 		mrtd.led_ = value.toBool();
 		modified_ = true;

sources/autoNum/numerotationcontext.cpp

@@ -275,3 +275,80 @@ QString NumerotationContext::formatValue(const QStringList &item)
 		return QString("%1").arg(value.toInt(), 3, 10, QChar('0'));
 	return QString::number(value.toInt());
 }
+
+/**
+	@brief NumerotationContext::saveToSettings
+	Save a hash of named NumerotationContexts to QSettings.
+	@param contexts : the named rules to save
+	@param currentRule : the name of the currently active rule
+	@param settings : QSettings instance
+	@param prefix : settings key prefix (e.g. "autonum/conductor")
+*/
+void NumerotationContext::saveToSettings(
+		const QHash<QString, NumerotationContext> &contexts,
+		const QString &currentRule,
+		QSettings &settings,
+		const QString &prefix)
+{
+	settings.setValue(prefix + "/current", currentRule);
+
+	// Clear stale array entries before writing (beginWriteArray does not
+	// remove entries beyond the new size).
+	settings.remove(prefix + "/rules");
+
+	QStringList names = contexts.keys();
+	settings.beginWriteArray(prefix + "/rules", names.size());
+	for (int i = 0; i < names.size(); ++i) {
+		settings.setArrayIndex(i);
+		const QString &name = names.at(i);
+		const NumerotationContext &nc = contexts.value(name);
+
+		settings.setValue("name", name);
+
+		// Serialize context to XML string
+		QDomDocument doc;
+		NumerotationContext nc_copy = nc;
+		QDomElement root = nc_copy.toXml(doc, "context");
+		doc.appendChild(root);
+		settings.setValue("xml", doc.toString());
+	}
+	settings.endArray();
+}
+
+/**
+	@brief NumerotationContext::loadFromSettings
+	Load named NumerotationContexts from QSettings.
+	@param settings : QSettings instance
+	@param prefix : settings key prefix (e.g. "autonum/conductor")
+	@return pair of (hash of named rules, name of current rule)
+*/
+QPair<QHash<QString, NumerotationContext>, QString> NumerotationContext::loadFromSettings(
+		QSettings &settings,
+		const QString &prefix)
+{
+	QPair<QHash<QString, NumerotationContext>, QString> result;
+	QHash<QString, NumerotationContext> &contexts = result.first;
+	QString &currentRule = result.second;
+
+	currentRule = settings.value(prefix + "/current").toString();
+
+	int size = settings.beginReadArray(prefix + "/rules");
+	for (int i = 0; i < size; ++i) {
+		settings.setArrayIndex(i);
+		QString name = settings.value("name").toString();
+		QString xmlStr = settings.value("xml").toString();
+
+		if (name.isEmpty() || xmlStr.isEmpty()) continue;
+
+		QDomDocument doc;
+		if (!doc.setContent(xmlStr)) continue;
+
+		QDomElement root = doc.documentElement();
+		NumerotationContext nc;
+		nc.fromXml(root);
+		contexts.insert(name, nc);
+	}
+	settings.endArray();
+
+	return result;
+}

sources/autoNum/numerotationcontext.h

@@ -21,6 +21,8 @@
 #include <QStringList>
 #include <QVariant>
 #include <QDomElement>
+#include <QHash>
+#include <QSettings>
 
 /**
 	This class represents a numerotation context, i.e. the data (type, value, increase)
@@ -60,6 +62,14 @@ class NumerotationContext
 		/// UI preview of a part's value matches what actually gets rendered.
 	static QString formatValue(const QStringList &item);
 
+	static void saveToSettings(const QHash<QString, NumerotationContext> &contexts,
+				   const QString &currentRule,
+				   QSettings &settings,
+				   const QString &prefix);
+	static QPair<QHash<QString, NumerotationContext>, QString> loadFromSettings(
+				   QSettings &settings,
+				   const QString &prefix);
+
 	private:
 	QStringList content_;
 };

sources/autoNum/renumberelementscommand.cpp

@@ -0,0 +1,78 @@
+/*
+    Copyright 2006-2026 The QElectroTech Team
+    This file is part of QElectroTech.
+
+    QElectroTech is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 2 of the License, or
+    (at your option) any later version.
+
+    QElectroTech is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "renumberelementscommand.h"
+
+#include "../qetproject.h"
+#include "../qetgraphicsitem/element.h"
+
+RenumberElementsCommand::RenumberElementsCommand(
+        QETProject *project,
+        QVector<ElementChange> changes,
+        QHash<QString, NumerotationContext> old_ctx,
+        QHash<QString, NumerotationContext> new_ctx,
+        const QString &text)
+    : QUndoCommand(text)
+    , project_(project)
+    , changes_(std::move(changes))
+    , old_ctx_(std::move(old_ctx))
+    , new_ctx_(std::move(new_ctx))
+{
+}
+
+void RenumberElementsCommand::undo()
+{
+    apply(false);
+}
+
+void RenumberElementsCommand::redo()
+{
+    // QUndoStack calls redo() once immediately after push(); keep standard behaviour.
+    if (first_redo_) {
+        first_redo_ = false;
+    }
+    apply(true);
+}
+
+void RenumberElementsCommand::apply(bool use_new)
+{
+    if (!project_) return;
+
+    // Restore project contexts
+    const auto &ctx = use_new ? new_ctx_ : old_ctx_;
+    for (auto it = ctx.constBegin(); it != ctx.constEnd(); ++it) {
+        project_->addElementAutoNum(it.key(), it.value());
+    }
+
+    // Apply per-element changes
+    for (const ElementChange &c : changes_) {
+        if (!c.element) continue;
+
+        const bool frozen = use_new ? c.new_frozen : c.old_frozen;
+        const auto &infos = use_new ? c.new_infos : c.old_infos;
+        const auto &seq   = use_new ? c.new_seq   : c.old_seq;
+
+        // Temporarily unfreeze so that label/infos update correctly.
+        const bool was_frozen = c.element->isFreezeLabel();
+        if (was_frozen) c.element->freezeLabel(false);
+
+        c.element->rSequenceStruct() = seq;
+        c.element->setElementInformations(infos);
+        c.element->freezeLabel(frozen);
+    }
+}

sources/autoNum/renumberelementscommand.h

@@ -0,0 +1,70 @@
+/*
+    Copyright 2006-2026 The QElectroTech Team
+    This file is part of QElectroTech.
+
+    QElectroTech is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 2 of the License, or
+    (at your option) any later version.
+
+    QElectroTech is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef RENUMBERELEMENTSCOMMAND_H
+#define RENUMBERELEMENTSCOMMAND_H
+
+#include <QUndoCommand>
+#include <QHash>
+#include <QVector>
+
+#include "../diagramcontext.h"
+#include "assignvariables.h" // defines autonum::sequentialNumbers
+
+class Element;
+class QETProject;
+
+/**
+ * @brief Undoable renumbering of element labels and sequence structs.
+ */
+class RenumberElementsCommand final : public QUndoCommand
+{
+public:
+    struct ElementChange
+    {
+        Element *element = nullptr;
+        DiagramContext old_infos;
+        DiagramContext new_infos;
+        autonum::sequentialNumbers old_seq;
+        autonum::sequentialNumbers new_seq;
+        bool old_frozen = false;
+        bool new_frozen = false;
+    };
+
+    RenumberElementsCommand(
+            QETProject *project,
+            QVector<ElementChange> changes,
+            QHash<QString, NumerotationContext> old_ctx,
+            QHash<QString, NumerotationContext> new_ctx,
+            const QString &text);
+
+    void undo() override;
+    void redo() override;
+
+private:
+    void apply(bool use_new);
+
+private:
+    QETProject *project_ = nullptr;
+    QVector<ElementChange> changes_;
+    QHash<QString, NumerotationContext> old_ctx_;
+    QHash<QString, NumerotationContext> new_ctx_;
+    bool first_redo_ = true;
+};
+
+#endif // RENUMBERELEMENTSCOMMAND_H

sources/autoNum/ui/autonumberingmanagementw.cpp

@@ -23,6 +23,7 @@
 #include "formulaautonumberingw.h"
 #include "numparteditorw.h"
 #include "qdebug.h"
+#include "renumberelementsdialog.h"
 #include "ui_autonumberingmanagementw.h"
 #include "ui_formulaautonumberingw.h"
 
@@ -48,6 +49,8 @@ AutoNumberingManagementW::AutoNumberingManagementW(QETProject *project,
 	ui->m_selected_folios_le->setDisabled(true);
 	ui->m_selected_folios_le->setReadOnly(true);
 	ui->m_apply_project_rb->setChecked(true);
+	// Enabled only when project is in "Under Development" status and not read-only.
+	ui->m_renumber_elements_pb->setEnabled(ui->m_status_cb->currentIndex() == 0 && project_ && !project_->isReadOnly());
 	setProjectContext();
 }
 
@@ -87,6 +90,7 @@ void AutoNumberingManagementW::on_m_status_cb_currentIndexChanged(int index)
 		ui->m_both_conductor_rb->setChecked(true);
 		ui->m_both_element_rb->setChecked(true);
 		ui->m_both_folio_rb->setChecked(true);
+		ui->m_renumber_elements_pb->setEnabled(true);
 	}
 	//Installing
 	else if (index == 1) {
@@ -96,15 +100,31 @@ void AutoNumberingManagementW::on_m_status_cb_currentIndexChanged(int index)
 		ui->m_new_conductor_rb->setChecked(true);
 		ui->m_new_element_rb->setChecked(true);
 		ui->m_new_folio_rb->setChecked(true);
+		ui->m_renumber_elements_pb->setEnabled(true);
 	}
 	//Built
 	else if (index == 2) {
 		ui->m_disable_conductor_rb->setChecked(true);
 		ui->m_disable_element_rb->setChecked(true);
 		ui->m_disable_folio_rb->setChecked(true);
+        	ui->m_renumber_elements_pb->setEnabled(false);
 	}
 }
 
+void AutoNumberingManagementW::on_m_renumber_elements_pb_clicked()
+{
+	if (!project_ || project_->isReadOnly()) return;
+	// Only allowed during "Under Development"
+	// if (ui->m_status_cb->currentIndex() != 1) return;
+
+	QStringList titles = project_->elementAutoNum().keys();
+	titles.sort(Qt::CaseInsensitive);
+	RenumberElementsDialog dlg(titles, this);
+	if (dlg.exec() != QDialog::Accepted) return;
+
+	project_->renumberElementsBySchemeTitle(dlg.selectedSchemeTitle());
+}
+
 /**
 	@brief AutoNumberingManagementW::on_m_apply_folios_rb_clicked
 	Set From Folios Combobox

sources/autoNum/ui/autonumberingmanagementw.h

@@ -50,6 +50,7 @@ class AutoNumberingManagementW : public QWidget
 		void on_m_from_folios_cb_currentIndexChanged(int);
 		void on_m_to_folios_cb_currentIndexChanged(int);
 		void on_m_status_cb_currentIndexChanged(int);
+		void on_m_renumber_elements_pb_clicked();
 		void on_m_apply_folios_rb_clicked();
 		void on_m_apply_project_rb_clicked();
 		void on_buttonBox_clicked(QAbstractButton *);

sources/autoNum/ui/autonumberingmanagementw.ui

@@ -305,6 +305,13 @@
            </property>
           </widget>
          </item>
+        <item>
+         <widget class="QPushButton" name="m_renumber_elements_pb">
+          <property name="text">
+           <string>Renumber element(s)…</string>
+          </property>
+         </widget>
+        </item>
          <item>
           <spacer name="horizontalSpacer_2">
            <property name="orientation">

sources/autoNum/ui/renumberelementsdialog.cpp

@@ -0,0 +1,75 @@
+/*
+    Copyright 2006-2026 The QElectroTech Team
+    This file is part of QElectroTech.
+
+    QElectroTech is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 2 of the License, or
+    (at your option) any later version.
+
+    QElectroTech is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "renumberelementsdialog.h"
+
+#include <QComboBox>
+#include <QDialogButtonBox>
+#include <QFormLayout>
+#include <QGroupBox>
+#include <QHBoxLayout>
+#include <QLabel>
+#include <QRadioButton>
+#include <QVBoxLayout>
+
+RenumberElementsDialog::RenumberElementsDialog(const QStringList &scheme_titles, QWidget *parent)
+    : QDialog(parent)
+    , m_scheme_titles(scheme_titles)
+{
+    setWindowTitle(tr("Renumber element(s)"));
+    setModal(true);
+
+    auto *vl = new QVBoxLayout(this);
+
+    auto *scope = new QGroupBox(tr("Scope"), this);
+    auto *scope_l = new QVBoxLayout(scope);
+    m_all_rb = new QRadioButton(tr("All schemes"), scope);
+    m_one_rb = new QRadioButton(tr("One scheme"), scope);
+    scope_l->addWidget(m_all_rb);
+    scope_l->addWidget(m_one_rb);
+    vl->addWidget(scope);
+
+    auto *form = new QFormLayout();
+    m_combo = new QComboBox(this);
+    m_combo->addItems(m_scheme_titles);
+    form->addRow(new QLabel(tr("Scheme:"), this), m_combo);
+    vl->addLayout(form);
+
+    m_buttons = new QDialogButtonBox(QDialogButtonBox::Ok | QDialogButtonBox::Cancel, this);
+    connect(m_buttons, &QDialogButtonBox::accepted, this, &QDialog::accept);
+    connect(m_buttons, &QDialogButtonBox::rejected, this, &QDialog::reject);
+    vl->addWidget(m_buttons);
+
+    m_all_rb->setChecked(true);
+    updateUi();
+
+    connect(m_all_rb, &QRadioButton::toggled, this, &RenumberElementsDialog::updateUi);
+    connect(m_one_rb, &QRadioButton::toggled, this, &RenumberElementsDialog::updateUi);
+}
+
+QString RenumberElementsDialog::selectedSchemeTitle() const
+{
+    if (m_all_rb && m_all_rb->isChecked()) return QString();
+    return m_combo ? m_combo->currentText() : QString();
+}
+
+void RenumberElementsDialog::updateUi()
+{
+    const bool one = m_one_rb && m_one_rb->isChecked();
+    if (m_combo) m_combo->setEnabled(one);
+}

sources/autoNum/ui/renumberelementsdialog.h

@@ -0,0 +1,59 @@
+/*
+    Copyright 2006-2026 The QElectroTech Team
+    This file is part of QElectroTech.
+
+    QElectroTech is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 2 of the License, or
+    (at your option) any later version.
+
+    QElectroTech is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef RENUMBERELEMENTSDIALOG_H
+#define RENUMBERELEMENTSDIALOG_H
+
+#include <QDialog>
+#include <QStringList>
+
+class QComboBox;
+class QRadioButton;
+class QDialogButtonBox;
+
+/**
+ * @brief Simple dialog to pick renumbering scope for elements.
+ *
+ * The user can choose between:
+ *  - all element autonumbering schemes
+ *  - one selected scheme title
+ */
+class RenumberElementsDialog final : public QDialog
+{
+    Q_OBJECT
+
+public:
+    explicit RenumberElementsDialog(const QStringList &scheme_titles, QWidget *parent = nullptr);
+
+    /**
+     * @return Empty string if "all" is selected, otherwise the chosen scheme title.
+     */
+    QString selectedSchemeTitle() const;
+
+private slots:
+    void updateUi();
+
+private:
+    QStringList m_scheme_titles;
+    QRadioButton *m_all_rb = nullptr;
+    QRadioButton *m_one_rb = nullptr;
+    QComboBox *m_combo = nullptr;
+    QDialogButtonBox *m_buttons = nullptr;
+};
+
+#endif // RENUMBERELEMENTSDIALOG_H

sources/bordertitleblock.cpp

@@ -505,7 +505,10 @@ void BorderTitleBlock::draw(QPainter *painter)
 {
 	//Set the QPainter
 	painter -> save();
-	QPen pen(Qt::black);
+		//Use a pen color that contrasts with the background
+	QColor border_color = Diagram::background_color.lightness() < 128
+			       ? QColor(Qt::white) : QColor(Qt::black);
+	QPen pen(border_color);
 	painter -> setPen(pen);
 	painter -> setBrush(Qt::NoBrush);
 
@@ -893,10 +896,20 @@ void BorderTitleBlock::updateDiagramContextForTitleBlock(
 	// An empty page-level value means the variable was auto-added to the
 	// folio's Custom tab (#495) but never actually set by the user, so it
 	// must not shadow a real project-level value of the same name (#531).
+	//
+	// That guard has to stop short of removing the key outright, though
+	// (#973). TitleBlockTemplate::interpreteVariables() only replaces a
+	// "%name"/"%{name}" placeholder when "name" is a key in this context at
+	// all -- an unset variable that never makes it in is left as its own
+	// literal placeholder text in the rendered title block, not blank.
+	// So an empty page-level value is skipped only when a real project-level
+	// one is already there to show through; otherwise it still goes in
+	// empty, which is what makes the placeholder resolve to nothing.
 	DiagramContext context = initial_context;
 	foreach (QString key, additional_fields_.keys()) {
-		if (!additional_fields_[key].toString().isEmpty())
-			context.addValue(key, additional_fields_[key]);
+		const QVariant value = additional_fields_[key];
+		if (!value.toString().isEmpty() || !context.contains(key))
+			context.addValue(key, value);
 	}
 
 	// ... overridden by the historical and/or dynamically generated fields

sources/conductorproperties.cpp

@@ -499,6 +499,7 @@ void ConductorProperties::applyForEqualAttributes(QList<ConductorProperties> lis
 		horiz_rotate_text    = cp.horiz_rotate_text;
 		m_vertical_alignment = cp.m_vertical_alignment;
 		m_horizontal_alignment = cp.m_horizontal_alignment;
+		style                = cp.style;
 
 		return;
 	}
@@ -555,6 +556,18 @@ void ConductorProperties::applyForEqualAttributes(QList<ConductorProperties> lis
 		m_dash_size = i_value;
 	equal = true;
 
+		//style
+	Qt::PenStyle pen_style;
+	pen_style = clist.first().style;
+	for(ConductorProperties cp : clist)
+	{
+		if (cp.style != pen_style)
+			equal = false;
+	}
+	if (equal)
+		style = pen_style;
+	equal = true;
+
 		//text
 	s_value = clist.first().text;
 	for(ConductorProperties cp : clist)

sources/dataBase/projectdatabase.cpp

@@ -17,6 +17,8 @@
 */
 #include "projectdatabase.h"
 
+#include "sqlreadonly.h"
+
 #include "../diagram.h"
 #include "../diagramposition.h"
 #include "../elementprovider.h"
@@ -28,13 +30,15 @@
 #include "../qetproject.h"
 
 #include <QLocale>
+#include <QFile>
 #include <QRegularExpression>
-#include <QSqlError>
-
 #include <QSqlDriver>
+#include <QSqlError>
 #include <sqlite3.h>
 
 
+
+
 /**
 	@brief projectDataBase::projectDataBase
 	Default constructor
@@ -208,6 +212,12 @@ bool projectDataBase::isReadOnlySelect(const QString &query, QString *error)
 */
 QSqlQuery projectDataBase::newQuery(const QString &query, QString *error) {
 	QString reason;
+
+	// First gate: which kind of statement is acceptable here at all. A
+	// textual check is the right tool for that and the wrong tool for
+	// anything else -- see isReadOnlySelect()'s own comment. It is what
+	// keeps ATTACH, BEGIN and PRAGMA out, none of which SQLite itself
+	// considers writes.
 	if (!isReadOnlySelect(query, &reason)) {
 		qWarning().noquote() << "projectDataBase::newQuery: rejected query:" << reason << "--" << query;
 		if (error) {
@@ -215,6 +225,24 @@ QSqlQuery projectDataBase::newQuery(const QString &query, QString *error) {
 		}
 		return QSqlQuery(m_data_base);
 	}
+
+	// Second gate, and the one that actually enforces read-only: SQLite is
+	// asked about the statement it compiled, instead of the text being read
+	// for clues. The first gate cannot see through a CTE prefix --
+	// "WITH x AS (SELECT 1) DELETE FROM element" starts with WITH, contains
+	// no semicolon, and deletes every row. That matters beyond the
+	// custom-query box, because this path is reachable from a file: a
+	// <graphics_table>'s saved <query> is read straight out of the .qet by
+	// ProjectDBModel::fromXml() and executed by fillValue(), so opening or
+	// exporting a project someone else produced would have been enough.
+	if (!QETSql::isSingleReadOnlyStatement(sqliteHandle(&m_data_base), query, &reason)) {
+		qWarning().noquote() << "projectDataBase::newQuery: rejected query:" << reason << "--" << query;
+		if (error) {
+			*error = reason;
+		}
+		return QSqlQuery(m_data_base);
+	}
+
 	return QSqlQuery(query, m_data_base);
 }
 
@@ -291,10 +319,23 @@ void projectDataBase::addElement(Element *element)
 void projectDataBase::removeElement(Element *element)
 {
 	m_content_changed = true;
+	bool changed = false;
+
 	m_remove_element_query.bindValue(":uuid", element->uuid().toString());
-	if(!m_remove_element_query.exec()) {
-		qDebug() << "projectDataBase::removeElement remove error : " << m_remove_element_query.lastError();
+	if (m_remove_element_query.exec()) {
+		changed = true;
 	} else {
+		qDebug() << "projectDataBase::removeElement remove error : " << m_remove_element_query.lastError();
+	}
+
+	m_remove_element_info_query.bindValue(":uuid", element->uuid().toString());
+	if (m_remove_element_info_query.exec()) {
+		changed = true;
+	} else {
+		qDebug() << "projectDataBase::removeElement remove element_info error : " << m_remove_element_info_query.lastError();
+	}
+
+	if (changed) {
 		emit dataBaseUpdated();
 	}
 }
@@ -1131,6 +1172,21 @@ void projectDataBase::prepareQuery()
 	m_remove_element_query = QSqlQuery(m_data_base);
 	m_remove_element_query.prepare(remove_element);
 
+		//REMOVE ELEMENT INFO
+		//element_info has no ON DELETE CASCADE (foreign keys aren't
+		//enforced by this connection), so removeElement() must clear it
+		//explicitly. Without this, the row is orphaned under the removed
+		//element's uuid, and re-adding an element with that same uuid
+		//later -- undo of this same removal, or a redo replaying it --
+		//hits element_info's PRIMARY KEY constraint on element_uuid: the
+		//element re-add succeeds, but its element_info insert silently
+		//fails and is lost. removeDiagram()'s cascade already clears this
+		//table when a whole folio goes, but that does not run for a
+		//single element removed on its own.
+	QString remove_element_info("DELETE FROM element_info WHERE element_uuid=:uuid");
+	m_remove_element_info_query = QSqlQuery(m_data_base);
+	m_remove_element_info_query.prepare(remove_element_info);
+
 		//UPDATE ELEMENT INFO
 	QString update_str("UPDATE element_info SET ");
 	for (auto string : QETInformation::elementInfoKeys()) {
@@ -1245,7 +1301,6 @@ void projectDataBase::bindDiagramInfoValues(QSqlQuery &query, Diagram *diagram)
 	}
 }
 
-#ifdef QET_EXPORT_PROJECT_DB
 /**
 	@brief projectDataBase::sqliteHandle
 	@param db
@@ -1263,6 +1318,7 @@ sqlite3 *projectDataBase::sqliteHandle(QSqlDatabase *db)
 	return handle;
 }
 
+#ifdef QET_EXPORT_PROJECT_DB
 
 /**
  * @brief projectDataBase::exportDb
@@ -1298,27 +1354,19 @@ void projectDataBase::exportDb(projectDataBase *db,
 		return;
 	}
 
-	QString connection_name("export_project_db_" % db->project()->uuid().toString());
-
-	if (true) //Enter in a scope only to nicely use QSqlDatabase::removeDatabase just after the end of the scope
-	{
-		auto file_db = QSqlDatabase::addDatabase("QSQLITE", connection_name);
-		file_db.setDatabaseName(path_);
-		if (!file_db.open()) {
-			return;
-		}
-
-		auto memory_db_handle = sqliteHandle(&db->m_data_base);
-		auto file_db_handle = sqliteHandle(&file_db);
-
-		auto sqlite_backup = sqlite3_backup_init(file_db_handle, "main", memory_db_handle, "main");
-		if (sqlite_backup)
-		{
-			sqlite3_backup_step(sqlite_backup, -1);
-			sqlite3_backup_finish(sqlite_backup);
-		}
-		file_db.close();
+	// VACUUM INTO requires the destination not to exist. QFileDialog may ask
+	// about overwriting, but it does not remove the existing file for us.
+	if (QFile::exists(path_) && !QFile::remove(path_)) {
+		qWarning() << "Unable to replace project database export:" << path_;
+		return;
+	}
+
+	// VACUUM INTO creates a standalone copy of the current database without
+	// requiring access to the SQLite driver's native connection handle.
+	const auto escaped_path = path_.replace("'", "''");
+	QSqlQuery query(db->m_data_base);
+	if (!query.exec("VACUUM INTO '" % escaped_path % "'")) {
+		qWarning() << "Unable to export project database:" << query.lastError().text();
 	}
-	QSqlDatabase::removeDatabase(connection_name);
 }
 #endif

sources/dataBase/projectdatabase.h

@@ -29,7 +29,7 @@ class QETProject;
 class Diagram;
 class Conductor;
 class Terminal;
-class sqlite3;
+struct sqlite3;
 
 /**
 	@brief The projectDataBase class
@@ -61,6 +61,26 @@ class projectDataBase : public QObject
 		QETProject *project() const;
 		QSqlQuery newQuery(const QString &query = QString(), QString *error = nullptr);
 		static bool isReadOnlySelect(const QString &query, QString *error = nullptr);
+
+			/**
+				The most rows any caller reads out of one query result.
+
+				A SELECT is not bounded by how much data the project holds:
+				SQLite produces rows lazily, so a query that never stops
+				producing them makes the loop that reads them never stop
+				either. A recursive CTE does exactly that in one line, and
+				a <graphics_table>'s <query> is stored in the .qet and run
+				on load -- so the text can arrive from a file rather than
+				from the person at the keyboard, and opening that file is
+				the whole attack.
+
+				100000 is far above any real result: the largest table in
+				the shipped examples is 396 rows. It is a backstop, not a
+				page size -- a caller that hits it has almost certainly
+				been handed something it should not run to completion, and
+				says so rather than truncating quietly.
+			*/
+		static constexpr int MaxResultRows = 100000;
 		QSqlDatabase database() const {return m_data_base;}
 		int excludedConductorCount() const;
 
@@ -119,6 +139,7 @@ class projectDataBase : public QObject
 		QSqlQuery m_insert_elements_query,
 				  m_insert_element_info_query,
 				  m_remove_element_query,
+				  m_remove_element_info_query,
 				  m_update_element_query,
 				  m_insert_diagram_query,
 				  m_remove_diagram_query,
@@ -135,9 +156,14 @@ class projectDataBase : public QObject
 				  m_cascade_remove_conductor_query,
 				  m_cascade_remove_element_query;
 
+	public:
+		// Deliberately outside the QET_EXPORT_PROJECT_DB guard below:
+		// newQuery() needs the raw connection to ask SQLite whether a
+		// query only reads, and that check runs in every build.
+		static sqlite3 *sqliteHandle(QSqlDatabase *db);
+
 #ifdef QET_EXPORT_PROJECT_DB
 	public:
-		static sqlite3 *sqliteHandle(QSqlDatabase *db);
 		static void exportDb(projectDataBase *db,
 				     QWidget *parent = nullptr,
 				     const QString &caption = QString(),

sources/dataBase/sqlreadonly.cpp

@@ -0,0 +1,134 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "sqlreadonly.h"
+
+#include <QCoreApplication>
+
+#include <sqlite3.h>
+
+namespace QETSql {
+
+/**
+	@brief QETSql::isSingleReadOnlyStatement
+	Ask SQLite itself whether @p query is exactly one statement, and whether
+	that statement only reads.
+
+	Why SQLite is asked rather than the text inspected: a check on the
+	query's first keyword cannot see what the statement actually does.
+	SQLite has allowed a CTE prefix in front of a data-modifying statement
+	since 3.8.3, so
+
+	@code
+	WITH x AS (SELECT 1) DELETE FROM element
+	@endcode
+
+	begins with WITH, contains no semicolon, and deletes every row.
+	sqlite3_stmt_readonly() reports on the statement SQLite compiled, not
+	on how it was spelled, so the same query is correctly refused here
+	while an ordinary WITH ... SELECT still passes.
+
+	The statement is compiled and immediately finalised; sqlite3_prepare_v2()
+	does not run it, so nothing is executed to reach this verdict.
+
+	This is a read-only test, NOT a statement-type allowlist: SQLite
+	considers ATTACH, BEGIN and several PRAGMAs read-only too, because none
+	of them change the contents of the database. Callers that need to
+	restrict which *kind* of statement is acceptable must say so separately
+	-- projectDataBase::newQuery() keeps isReadOnlySelect() in front of this
+	for exactly that reason.
+
+	@param handle the connection the query would run on. A null handle is
+	refused rather than waved through: without it there is nothing to ask,
+	and guessing from the text is the weakness this exists to replace.
+	@param query the raw SQL text
+	@param error set to a human-readable reason when this returns false
+	@return true if @p query is a single, read-only statement
+*/
+bool isSingleReadOnlyStatement(sqlite3 *handle, const QString &query, QString *error)
+{
+	if (error) {
+		error->clear();
+	}
+
+	if (!handle) {
+		if (error) {
+			*error = QCoreApplication::translate("QETSql",
+				"Impossible de vérifier la requête : "
+				"aucune connexion SQLite disponible.");
+		}
+		return false;
+	}
+
+	const QByteArray utf8 = query.toUtf8();
+	sqlite3_stmt *statement = nullptr;
+	const char *tail = nullptr;
+
+	if (sqlite3_prepare_v2(handle, utf8.constData(), utf8.size(),
+			       &statement, &tail) != SQLITE_OK)
+	{
+		if (error) {
+			*error = QCoreApplication::translate("QETSql",
+					"Requête SQL invalide : %1")
+				 .arg(QString::fromUtf8(sqlite3_errmsg(handle)));
+		}
+		sqlite3_finalize(statement);
+		return false;
+	}
+
+	// Whitespace or a bare comment compiles successfully to no statement
+	// at all, and sqlite3_stmt_readonly() must not be handed that.
+	if (!statement) {
+		if (error) {
+			*error = QCoreApplication::translate("QETSql",
+				"La requête ne contient aucune instruction.");
+		}
+		return false;
+	}
+
+	const bool read_only = sqlite3_stmt_readonly(statement) != 0;
+	sqlite3_finalize(statement);
+
+	if (!read_only) {
+		if (error) {
+			*error = QCoreApplication::translate("QETSql",
+				"Seules les requêtes en lecture seule sont autorisées : "
+				"cette requête modifierait la base de données.");
+		}
+		return false;
+	}
+
+	// tail points just past the first statement, semicolon included.
+	// Anything left once semicolons and spacing are stripped is a second
+	// statement -- caught structurally here, where "SELECT ';'" is a
+	// perfectly ordinary query rather than a suspicious string.
+	if (tail) {
+		QString rest = QString::fromUtf8(tail);
+		rest.remove(QLatin1Char(';'));
+		if (!rest.trimmed().isEmpty()) {
+			if (error) {
+				*error = QCoreApplication::translate("QETSql",
+					"Une seule requête est autorisée.");
+			}
+			return false;
+		}
+	}
+
+	return true;
+}
+
+} // namespace QETSql

sources/dataBase/sqlreadonly.h

@@ -0,0 +1,43 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef SQLREADONLY_H
+#define SQLREADONLY_H
+
+#include <QString>
+
+struct sqlite3;
+
+/**
+	Deciding whether a piece of SQL only reads.
+
+	Deliberately its own translation unit, depending on nothing but QString
+	and SQLite: it is the enforcement point for every query QElectroTech
+	runs against a project database, including queries that arrive from
+	outside the application (a .qet file's saved report/table query), so it
+	is worth being able to test it in isolation -- see
+	tests/qttest/tst_sqlreadonly.cpp, which links this file and nothing
+	else of QElectroTech.
+*/
+namespace QETSql {
+
+	bool isSingleReadOnlyStatement(sqlite3 *handle,
+				       const QString &query,
+				       QString *error = nullptr);
+}
+
+#endif // SQLREADONLY_H

sources/diagram.cpp

@@ -1709,10 +1709,7 @@ bool Diagram::fromXml(QDomElement &document,
 		//Get the top left corner of the rectangle that contain all added items
 		QRectF items_rect;
 		for (auto item : added_items) {
-			items_rect = items_rect.united(
-						item->mapToScene(
-							item->boundingRect()
-							).boundingRect());
+			items_rect = items_rect.united(item->mapToScene(item->boundingRect()).boundingRect());
 		}
 
 		QPointF point_ = items_rect.topLeft();
@@ -1720,8 +1717,12 @@ bool Diagram::fromXml(QDomElement &document,
 						position.y() - point_.y()));
 
 			//Translate all added items
-		for (auto qgi : added_items)
+		for (auto qgi : added_items) {
 			qgi->setPos(qgi->pos() += pos_);
+		}
+	}
+	else
+	{
 	}
 
 	  // Load conductor

sources/diagramcommands.cpp

@@ -77,6 +77,23 @@ void PasteDiagramCommand::redo()
 	{
 		first_redo = false;
 
+		//Resolve a linked master/slave pair pasted together (bugtracker
+		//#607) before anything below renews their uuids: at this exact
+		//moment a pasted element's tmp_uuids_link still holds its
+		//source's original partner uuid, which still equals the
+		//not-yet-renewed uuid of that partner's own pasted copy if it
+		//was carried along in the same batch. Scoped to this batch only
+		//(not a project-wide search), so a pair pasted together links to
+		//each other and not to an original element left elsewhere that
+		//happens to still carry that same soon-to-be-replaced uuid. If
+		//only one half of a linked group was pasted, its link entry
+		//simply finds no match here and is dropped -- same "leave it
+		//unlinked" outcome as always.
+		const QList <Element *> elmts_list = content.m_elements;
+		for (Element *e : elmts_list) {
+			e->initLink(elmts_list);
+		}
+
 		//make new uuid for every pasted conductor, because old uuid are
 		//the uuid of the copied conductor
 		const QList <Conductor *> all_pasted_conductors = content.conductors();
@@ -85,7 +102,6 @@ void PasteDiagramCommand::redo()
 		}
 
 		//this is the first paste, we do some actions for the new element
-		const QList <Element *> elmts_list = content.m_elements;
 		for (Element *e : elmts_list)
 		{
 			//make new uuid, because old uuid are the uuid of the copied element

sources/diagramcontext.cpp

@@ -151,8 +151,8 @@ bool DiagramContext::operator!=(const DiagramContext &dc) const
 void DiagramContext::toXml(QDomElement &e, const QString &tag_name) const
 {
 	foreach (QString key, keys()) {
-		if ((tag_name == "elementInformation") &&
-			(m_content[key].toString().trimmed().isEmpty())) {
+		const QString raw = m_content[key].toString();
+		if ((tag_name == "elementInformation") && raw.trimmed().isEmpty()) {
 			continue;
 		}
 		QDomElement property = e.ownerDocument().createElement(tag_name);
@@ -161,7 +161,15 @@ void DiagramContext::toXml(QDomElement &e, const QString &tag_name) const
 		property.removeAttribute("name");
 		property.setAttribute("show", m_content_show[key]);
 		property.setAttribute("name", key);
-		QDomText value = e.ownerDocument().createTextNode(m_content[key].toString().trimmed());
+		// Trim stray leading/trailing whitespace around real content, but
+		// not a value that IS whitespace: unconditionally trimming an
+		// all-whitespace string collapses it to "", which is silently
+		// indistinguishable from a value that was never set. A title-block
+		// custom variable set to a single space -- a workaround for #973,
+		// where an unset variable renders as its own literal placeholder --
+		// would otherwise vanish on the very next save.
+		const QString stored = raw.trimmed().isEmpty() ? raw : raw.trimmed();
+		QDomText value = e.ownerDocument().createTextNode(stored);
 		property.appendChild(value);
 		e.appendChild(property);
 	}

sources/diagramcontext.h

@@ -17,7 +17,7 @@
 */
 #ifndef DIAGRAM_CONTEXT_H
 #define DIAGRAM_CONTEXT_H
-#include "pugixml/src/pugixml.hpp"
+#include "pugixml.hpp"
 
 #include <QDomElement>
 #include <QHash>

sources/diagramevent/diagrameventaddmacro.cpp

@@ -67,7 +67,19 @@ m_preview_item(nullptr)
 			dummy_diagram->setDisplayGrid(false);
 			dummy_diagram->fromXml(diagram_node, QPointF(0, 0), false, nullptr);
 
+			// Compute bounding rect of TOP-LEVEL items only (matching fromXml's added_items logic)
+			// Child items (DynamicElementTextItem, Terminal) are NOT included - they move with parents
+			QRectF top_level_rect;
+			for (auto *item : dummy_diagram->items()) {
+				if (!item->parentItem()) {
+					top_level_rect = top_level_rect.united(
+								item->mapToScene(item->boundingRect()).boundingRect());
+				}
+			}
+			m_items_top_left = top_level_rect.topLeft();
+
 			QRectF scene_rect = dummy_diagram->itemsBoundingRect();
+
 			if (!scene_rect.isEmpty()) {
 				QPixmap pixmap(scene_rect.toAlignedRect().size());
 				pixmap.fill(Qt::transparent);
@@ -80,10 +92,11 @@ m_preview_item(nullptr)
 			}
 		}
 
-		if (m_preview_item) {
-			m_preview_item->setPos(Diagram::snapToGrid(pos));
-			m_preview_item->setOpacity(0.6);
-			m_diagram->addItem(m_preview_item);
+	if (m_preview_item) {
+		QPointF snapped = Diagram::snapToGrid(pos);
+		m_preview_item->setPos(snapped);
+		m_preview_item->setOpacity(0.6);
+		m_diagram->addItem(m_preview_item);
 			m_running = true;
 		}
 
@@ -117,6 +130,7 @@ void DiagramEventAddMacro::mouseMoveEvent(QGraphicsSceneMouseEvent *event)
 {
 	if (m_preview_item) {
 		const auto pos_{Diagram::snapToGrid(event->scenePos())};
+
 		m_preview_item->setPos(pos_);
 
 		if (m_status_bar) {
@@ -141,7 +155,8 @@ void DiagramEventAddMacro::mouseReleaseEvent(QGraphicsSceneMouseEvent *event)
 			emit finish();
 		}
 		else if (event->button() == Qt::LeftButton) {
-			addMacro(Diagram::snapToGrid(event->scenePos()));
+			QPointF snapped = Diagram::snapToGrid(event->scenePos());
+			addMacro(snapped);
 		}
 	}
 	event->setAccepted(true);
@@ -238,10 +253,9 @@ void DiagramEventAddMacro::addMacro(QPointF final_pos)
 
 	if (!diagram_node.isNull()) {
 		QDomElement cloned_node = diagram_node.cloneNode(true).toElement();
-
 		DiagramContent pasted_content;
 
-		m_diagram->fromXml(cloned_node, final_pos, false, &pasted_content);
+		m_diagram->fromXml(cloned_node, final_pos + m_items_top_left, false, &pasted_content);
 		m_diagram->refreshContents();
 
 			// Prevent PasteDiagramCommand from erasing labels (BMK)

sources/diagramevent/diagrameventaddmacro.h

@@ -40,6 +40,7 @@ private:
 	QDomDocument m_macro_doc;
 	QGraphicsPixmapItem *m_preview_item;
 	QPointer<QStatusBar> m_status_bar;
+	QPointF m_items_top_left;	// top-left of bounding rect of top-level items in the macro (for correct placement offset)
 };
 
 #endif // DIAGRAMEVENTADDMACRO_H

sources/diagramevent/diagrameventaddpaste.cpp

@@ -22,6 +22,7 @@
 #include "../qetapp.h"
 #include "../qetdiagrameditor.h"
 #include "../qetgraphicsitem/conductor.h"
+#include "../qetproject.h"
 
 #include <QSettings>
 
@@ -40,6 +41,7 @@
 	DiagramEventAddPaste::DiagramEventAddPaste(Diagram *diagram, const QPointF &start_pos) :
 	DiagramEventInterface(diagram)
 {
+	Q_UNUSED(start_pos);  // items stay at their original XML position
 		//DiagramEventInterface::init() is called by Diagram::setEventInterface
 		//only when it is replacing an earlier interface, so call it here as
 		//DiagramEventAddMacro does.
@@ -51,8 +53,25 @@
 	QDomDocument document_xml;
 	if (!document_xml.setContent(clipboard_text)) return;
 
+		//Batch the database work the same way project loading does
+		//(QETProject::readProjectXml): without this, every addItem()
+		//below emits dataBaseUpdated(), which makes each connected
+		//table model re-run its full SQL query -- ~77 queries for a
+		//typical paste, i.e. the multi-second stall on Ctrl+V.
+	auto *db = m_diagram->project() ? m_diagram->project()->dataBase() : nullptr;
+	if (db) {
+		db->blockSignals(true);
+		db->setUpdateBlocked(true);
+	}
+
 		//Load items at their original XML coordinates.
 	m_diagram->fromXml(document_xml, QPointF(), false, &m_content);
+
+	if (db) {
+		db->blockSignals(false);
+		db->setUpdateBlocked(false);
+		db->updateDB();
+	}
 	if (!m_content.count()) return;
 
 	const QList<QGraphicsItem *> movable = m_content.items(MovableItems);
@@ -85,33 +104,23 @@
 	};
 	const QPointF grid_origin = snapGrid(top_left);
 
-		//Move the group to the cursor, rather than the cursor to the
-		//group. Both put the copy under the pointer, but warping the
-		//pointer also drags it back to the original's position, so the
-		//copy appears exactly on top of what was copied until the mouse
-		//is moved -- which is the thing pasting under the cursor was
-		//meant to avoid (issue #913). Taking the pointer away from
-		//where the user put it is also its own surprise.
-	m_group_origin = snapGrid(start_pos);
-	const QPointF offset = m_group_origin - grid_origin;
-
-		//Store each item's position after the move. moveTo() applies a
+		//Store each item's original position.  moveTo() applies a
 		//grid-snapped delta from the baseline to these, so items
 		//preserve their layout and move in whole grid steps.
 	for (auto *item : movable) {
-		item->setPos(item->pos() + offset);
 		m_relative_pos.insert(item, item->pos());
 	}
+	m_group_origin = grid_origin;
 
-		//The conductors were laid out against the old terminal
+		//The conductors were laid out against the original terminal
 		//positions, so re-route them before anything is drawn.
 	const QList<Conductor *> conductors = m_content.conductors(DiagramContent::AnyConductor);
 	for (auto *conductor : conductors) {
 		conductor->updatePath();
 	}
 
-		//The baseline is known now, so moveTo() does not have to
-		//capture one from the first mouse movement.
+		//The baseline is the group's grid-snapped origin, so moveTo()
+		//does not have to capture one from the first mouse movement.
 	m_initial_cursor = m_group_origin;
 	m_baseline_captured = true;
 
@@ -125,6 +134,14 @@
 			if (const auto qde = QETApp::diagramEditorAncestorOf(view)) {
 				m_status_bar = qde->statusBar();
 			}
+				//Warp the cursor to the group's grid-snapped origin so
+				//the actual cursor position matches m_initial_cursor.
+				//Without this the first mouseMoveEvent computes a large
+				//delta (cursor is still at the Ctrl+V press location)
+				//and the items jump on first touch.
+			const QPoint view_pos = view->mapFromScene(m_initial_cursor);
+			const QPoint global_pos = view->viewport()->mapToGlobal(view_pos);
+			QCursor::setPos(global_pos);
 		}
 	}
 	showHint();

sources/diagramview.cpp

@@ -445,6 +445,82 @@ void DiagramView::pasteHere()
 	paste(mapToScene(m_paste_here_pos));
 }
 
+/**
+	@brief DiagramView::duplicate
+	Copy the current selection and place the copy at @p stepOffset grid
+	steps from it, landing immediately rather than following the cursor
+	like Ctrl+V does (bugtracker #991). @p stepOffset comes from
+	DuplicateOffsetDialog: (1, 0) is one grid step right, (0, -1) is one
+	grid step up, and so on -- QET's own scene axes, X right and Y down.
+
+	No interactive placement step on purpose: the point of a duplicate
+	shortcut is unattended, repeatable stamping (configure the offset
+	once, then tap Ctrl+D to lay out a row), which following the cursor
+	would interrupt on every press. QET already reselects whatever a
+	paste just added (see PasteDiagramCommand::redo()), so the next
+	Ctrl+D naturally continues from the copy just placed, not the
+	original -- a press-and-hold row falls out of that for free, with no
+	special-casing needed here for "keep going from the last one".
+
+	The offset is applied by hand rather than by asking paste()/
+	Diagram::fromXml() to place the copy at a target position. Both of
+	those feed the position through Diagram::snapToGrid(), which reads
+	QApplication::keyboardModifiers() and rounds to the nearest PIXEL
+	instead of the grid whenever Ctrl is held -- and Ctrl is always held
+	here, this action's own shortcut being Ctrl+D. Measured the hard way
+	before settling on this: routing the offset through paste() first
+	produced copies off-grid on both axes, by an amount that tracked the
+	selection's own bounding-box geometry rather than being a fixed
+	error. fromXml() is instead called with no position at all, which
+	leaves every item at its source coordinates (landing the copy
+	exactly on top of the originals -- (0, 0) is not a position, this is
+	"keep the source coordinates"), and the offset is added directly
+	with setPos(). A plain addition cannot be off by a rounding rule
+	that never runs.
+
+	Conductors are not in the translated set: fromXml() itself does not
+	reposition them either -- they are loaded from XML after elements
+	are already in their final place and take their geometry from their
+	terminals, which have already moved with the elements that own
+	them. Likewise dynamic element texts are not translated separately:
+	they are children of their element and move with it under Qt's
+	normal parent-child transform.
+*/
+void DiagramView::duplicate(const QPoint &stepOffset)
+{
+	if (!isInteractive() || m_diagram->isReadOnly()) return;
+
+	const QList<QGraphicsItem *> selection = m_diagram->selectedItems();
+	if (selection.isEmpty()) return;
+
+	QSettings settings;
+	const int x_grid = settings.value(QStringLiteral("diagrameditor/Xgrid"),
+									  Diagram::xGrid).toInt();
+	const int y_grid = settings.value(QStringLiteral("diagrameditor/Ygrid"),
+									  Diagram::yGrid).toInt();
+	const QPointF offset(stepOffset.x() * x_grid, stepOffset.y() * y_grid);
+
+	// Mirrors copy(), but does not touch the system clipboard: Ctrl+D
+	// should not clobber whatever the user last copied with Ctrl+C.
+	QDomDocument document = m_diagram->toXml(false, true);
+
+	DiagramContent pasted;
+	// No position argument -- see the function comment above for why
+	// the offset is not passed here.
+	m_diagram->fromXml(document, QPointF(), false, &pasted);
+	if (!pasted.count()) return;
+
+	const int movable = DiagramContent::Elements | DiagramContent::TextFields
+					   | DiagramContent::Images | DiagramContent::Shapes
+					   | DiagramContent::Tables | DiagramContent::TerminalStrip;
+	for (QGraphicsItem *item : pasted.items(movable))
+		item->setPos(item->pos() + offset);
+
+	m_diagram->clearSelection();
+	m_diagram->undoStack().push(new PasteDiagramCommand(m_diagram, pasted));
+	adjustSceneRect();
+}
+
 /**
 	Manage the events press click :
 	 *  click to add an independent text field
@@ -1401,7 +1477,7 @@ void DiagramView::createTemplateFromSelection()
 
 				collection_node.appendChild(collection_elmt);
 			} else {
-				qDebug() << "Warnung: Konnte XML-Definition für" << old_type << "nicht laden.";
+				qDebug() << "Warning: could not load XML definition for" << old_type;
 			}
 		}
 	}

sources/diagramview.h

@@ -137,6 +137,7 @@ class DiagramView : public PaletteGraphicsView
 		void copy();
 		void paste(const QPointF & = QPointF(), QClipboard::Mode = QClipboard::Clipboard);
 		void pasteHere();
+		void duplicate(const QPoint &stepOffset);
 		void adjustSceneRect();
 		void updateWindowTitle();
 		void resetConductors();

sources/editor/ui/elementpropertieseditorwidget.cpp

@@ -17,6 +17,7 @@
 */
 #include "elementpropertieseditorwidget.h"
 
+#include "../../qet.h"
 #include "../../qetapp.h"
 #include "../../qetinformation.h"
 #include "ui_elementpropertieseditorwidget.h"
@@ -185,13 +186,13 @@ void ElementPropertiesEditorWidget::upDateInterface()
 
 		const DiagramContext &info = m_data.m_informations;
 		ui->m_auto_num_locked_cb->setChecked(
-			info.value(QStringLiteral("auto_num_locked")).toString() == QLatin1String("true"));
+			QET::infoFlagIsTrue(info.value(QStringLiteral("auto_num_locked")).toString()));
 		ui->m_potential_isolating_cb->setChecked(
-			info.value(QStringLiteral("potential_isolating")).toString() == QLatin1String("true"));
+			QET::infoFlagIsTrue(info.value(QStringLiteral("potential_isolating")).toString()));
 	}
 
 	ui->m_exclude_from_bom_cb->setChecked(
-		m_data.m_informations.value(QStringLiteral("exclude_from_bom")).toString() == QLatin1String("true"));
+		QET::infoFlagIsTrue(m_data.m_informations.value(QStringLiteral("exclude_from_bom")).toString()));
 
 	on_m_base_type_cb_currentIndexChanged(ui->m_base_type_cb->currentIndex());
 }

sources/editor/ui/qetelementeditor.cpp

@@ -25,6 +25,8 @@
 #include "../../qetapp.h"
 #include "../../qetmainwindow.h"
 #include "../../recentfiles.h"
+#include "../../elementscollectioncache.h"
+#include "../../factory/elementpicturefactory.h"
 #include "../graphicspart/customelementpart.h"
 #include "../elementitemeditor.h"
 #include "../styleeditor.h"
@@ -348,6 +350,24 @@ bool QETElementEditor::toLocation(const ElementsLocation &location)
 									 tr("Impossible d'enregistrer l'élément", "message box content"));
 		return(false);
 	}
+
+		//setXml() just wrote the new drawing to disk, but the preview shown
+		//in the elements panel comes from two caches keyed by path+uuid that
+		//nothing here has told about the change: ElementPictureFactory's
+		//in-memory picture cache and ElementsCollectionCache's on-disk
+		//SQLite cache (see ElementsLocation::icon()). locationWasSaved()
+		//(elementscollectionwidget.cpp) re-reads the icon right after this
+		//call returns, but both caches still hand back the pre-edit pixmap,
+		//so the panel keeps showing the stale preview until the whole
+		//collection is reloaded. Drop and rebuild them here.
+	ElementPictureFactory::instance()->dropCache(location);
+	if (ElementsCollectionCache *cache = QETApp::collectionCache()) {
+		if (cache->fetchData(location)) {
+			cache->cacheName(location.toString(), location.uuid());
+			cache->cachePixmap(location.toString(), location.uuid());
+		}
+	}
+
 	return(true);
 }
 

sources/elementspanelwidget.cpp

@@ -674,6 +674,27 @@ void ElementsPanelWidget::duplicateDiagram()
 		bool erase_labels = settings.value(
 			"diagramcommands/erase-label-on-copy", true).toBool();
 
+		// Resolve a linked pair duplicated together against each other
+		// (bugtracker #607) before the loop below renews their uuids or
+		// clears their pending links: at this exact moment a copy's
+		// tmp_uuids_link still holds its source's original partner
+		// uuid, which still equals the not-yet-renewed uuid of that
+		// partner's own copy if both were duplicated together. Scoped
+		// to this diagram's own copies, not a project-wide search, so
+		// this never links back to the source elements the copies were
+		// made from -- if only one half of a linked pair is here, its
+		// link entry simply finds no match and is dropped, same as
+		// clearPendingLinks() used to do unconditionally for every copy.
+		QList<Element *> new_elements;
+		for (QGraphicsItem *item : new_diagram->items()) {
+			if (Element *elmt = dynamic_cast<Element *>(item)) {
+				new_elements << elmt;
+			}
+		}
+		for (Element *elmt : new_elements) {
+			elmt->initLink(new_elements);
+		}
+
 		for (QGraphicsItem *item : new_diagram->items()) {
 			if (Element *elmt = dynamic_cast<Element *>(item)) {
 				// The XML round-trip kept the source elements' uuids. Give the
@@ -695,9 +716,9 @@ void ElementsPanelWidget::duplicateDiagram()
 					new_diagram->restoreText(elmt);
 				}
 
-				// Clear pending links so copies don't link back to
-				// the source elements via stale UUIDs.
-				elmt->clearPendingLinks();
+				// initLink() above already cleared tmp_uuids_link for
+				// every copy, matched or not -- nothing left here that
+				// could link back to a stale source uuid.
 
 				// Clean up copied element data:
 				// 1. Slaves always lose label/formula/comment/location

sources/elementtextsmover.cpp

@@ -19,6 +19,7 @@
 
 #include "QPropertyUndoCommand/qpropertyundocommand.h"
 #include "diagram.h"
+#include "qetapp.h"
 #include "qetgraphicsitem/dynamicelementtextitem.h"
 #include "qetgraphicsitem/elementtextitemgroup.h"
 
@@ -137,25 +138,14 @@ void ElementTextsMover::endMovement()
 
 QString ElementTextsMover::undoText() const
 {
-	QString undo_text;
-	
-	if(m_text_count == 1)
-		undo_text.append(QObject::tr("Déplacer un texte d'élément"));
-	else if(m_text_count > 1)
-		undo_text.append(QObject::tr("Déplacer %1 textes d'élément").arg(m_items_hash.size()));
-	
-	if(m_group_count >= 1)
-	{
-		if(undo_text.isEmpty())
-			undo_text.append(QObject::tr("Déplacer"));
-		else
-			undo_text.append(QObject::tr(" et"));
-		
-		if(m_group_count == 1)
-			undo_text.append(QObject::tr(" un groupe de texte"));
-		else
-			undo_text.append(QObject::tr((" %1 groupes de textes")).arg(m_group_count));
-	}
-	
-	return undo_text;
+	QStringList parts;
+	if (m_text_count)
+		parts << QObject::tr("%n texte(s) d'élément", "", m_text_count);
+	if (m_group_count)
+		parts << QObject::tr("%n groupe(s) de textes", "", m_group_count);
+
+	if (parts.isEmpty())
+		return QString(); // should never occur
+
+	return QObject::tr("Déplacer %1").arg(QLocale(QETApp::interfaceLanguage()).createSeparatedList(parts));
 }

sources/factory/qetgraphicstablefactory.h

@@ -32,8 +32,14 @@ class QetGraphicsTableFactory
 
 		static void createAndAddNomenclature(Diagram *diagram);
 		static void createAndAddSummary(Diagram *diagram);
-	private:
+			// Public so a caller that has already built and configured an
+			// AddTableDialog itself (never shown or exec'd -- the two
+			// methods above always exec() one, which the scripting API
+			// cannot use headlessly) can create a table from it directly.
+			// create() only reads settings already on the dialog; nothing
+			// about it depends on the dialog having been shown.
 		static void create(Diagram *diagram, AddTableDialog *dialog);
+	private:
 		static QetGraphicsTableItem *newTable(
 				Diagram *diagram,
 				AddTableDialog *dialog,

sources/factory/ui/addtabledialog.cpp

@@ -72,6 +72,15 @@ bool AddTableDialog::adjustTableToFolio() const
 	return ui->m_adjust_table_size_cb->isChecked();
 }
 
+/**
+	@brief AddTableDialog::setAdjustTableToFolio
+	@param set
+*/
+void AddTableDialog::setAdjustTableToFolio(bool set)
+{
+	ui->m_adjust_table_size_cb->setChecked(set);
+}
+
 /**
 	@brief AddTableDialog::addNewTableToNewDiagram
 	@return
@@ -81,6 +90,15 @@ bool AddTableDialog::addNewTableToNewDiagram() const
 	return ui->m_add_table_and_folio->isChecked();
 }
 
+/**
+	@brief AddTableDialog::setAddNewTableToNewDiagram
+	@param set
+*/
+void AddTableDialog::setAddNewTableToNewDiagram(bool set)
+{
+	ui->m_add_table_and_folio->setChecked(set);
+}
+
 /**
 	@brief AddTableDialog::tableName
 	@return
@@ -90,6 +108,18 @@ QString AddTableDialog::tableName() const
 	return ui->m_table_name_le->text();
 }
 
+/**
+	@brief AddTableDialog::setTableName
+	Set the name field directly, so a caller that builds this dialog to
+	read from (never shows or execs it -- the scripting API's addTable())
+	does not need a name typed by a user who was never there to type one.
+	@param name
+*/
+void AddTableDialog::setTableName(const QString &name)
+{
+	ui->m_table_name_le->setText(name);
+}
+
 /**
 	@brief AddTableDialog::headerMargins
 	@return

sources/factory/ui/addtabledialog.h

@@ -44,9 +44,12 @@ class AddTableDialog : public QDialog
 
 		void setQueryWidget(QWidget *widget);
 		bool adjustTableToFolio() const;
+		void setAdjustTableToFolio(bool set);
 		bool addNewTableToNewDiagram() const;
+		void setAddNewTableToNewDiagram(bool set);
 
 		QString tableName() const;
+		void setTableName(const QString &name);
 
 		QMargins headerMargins() const;
 		Qt::Alignment headerAlignment() const;

sources/main.cpp

@@ -22,6 +22,8 @@
 #include "logging/eventloopwatchdog.h"
 #include "logging/qetlogger.h"
 #include "machine_info.h"
+#include "diagram.h"
+#include "palettegraphicsview.h"
 #include "qet.h"
 #include "qetapp.h"
 #include "qetmessagebox.h"
@@ -31,6 +33,7 @@
 
 #include <QApplication>
 #include <QDomImplementation>
+#include <QFont>
 
 #include <QStyleFactory>
 #include <QtConcurrentRun>
@@ -105,6 +108,19 @@ int main(int argc, char **argv)
 	// from Qt 6.12 on; opt in explicitly for older Qt 5/6.
 	QDomImplementation::setInvalidDataPolicy(
 		QDomImplementation::ReturnNullNode);
+
+#ifdef Q_OS_WIN
+	// "MS Shell Dlg 2" is not a font but a Windows alias, and many projects
+	// and settings saved on Windows carry it. Qt 5's GDI font backend let
+	// Windows resolve it to Tahoma; Qt 6's DirectWrite backend does not know
+	// the alias and falls back to Arial, so those texts come out heavier on
+	// screen and in exported PDFs (bugtracker #340). Resolve both aliases
+	// the way Windows does. Done before any application object exists so
+	// that the headless export and scripting runs below get it too.
+	QFont::insertSubstitution("MS Shell Dlg 2", "Tahoma");
+	QFont::insertSubstitution("MS Shell Dlg", "Microsoft Sans Serif");
+#endif
+
 	//Creation and execution of the application
 	//HighDPI
 	qputenv("QT_ENABLE_HIGHDPI_SCALING", "1");
@@ -144,6 +160,22 @@ int main(int argc, char **argv)
 #endif
 	}
 
+	// Re-apply the sheet background last picked in the diagram editor, so
+	// every project opened from here on -- existing or new, whichever one
+	// it is -- draws that background instead of the built-in default that
+	// would otherwise force the user to pick it again after each start.
+	//
+	// Done here rather than in main()'s first lines on purpose: the
+	// headless export and scripting runs above return before reaching
+	// this point and must keep rendering on plain white. It also has to
+	// happen before QETApp is constructed below, since that constructor
+	// already loads the projects given on the command line.
+	{
+		const QetSettings::SheetBackground sheet_background = QetSettings::sheetBackground();
+		PaletteGraphicsView::setCustomBackgroundColor(sheet_background.custom);
+		Diagram::background_color = sheet_background.color;
+	}
+
 	// Resolve the logger's state (log directory, session filename, open
 	// file handle) explicitly here, immediately before installing the
 	// handler -- not implicitly on whichever thread happens to log

sources/palettegraphicsview.cpp

@@ -21,12 +21,30 @@
 
 #include <QApplication>
 #include <QEvent>
-#include <QPainter>
 #include <QPaintEvent>
 #include <QStyleHintReturnMask>
 #include <QStyleOptionRubberBand>
 #include <QtMath>
 
+namespace {
+	/**
+		QGraphicsScene::drawItems() is protected, and QGraphicsView::drawItems()
+		hands the scene the viewport only when the painter is on it. The
+		view paints into an image, and still needs the scene to get the
+		viewport: that is what makes the scene record where it painted
+		each item, which is where the item is erased from when it moves.
+		Naming the member through a derived class is the standard way to
+		a pointer to a protected member; a call through it dispatches to
+		the scene's own override, if any.
+	*/
+	struct SceneAccess : QGraphicsScene
+	{
+		using DrawItems = void (QGraphicsScene::*)(QPainter *, int, QGraphicsItem *[],
+		                                           const QStyleOptionGraphicsItem[], QWidget *);
+		static DrawItems drawItemsPointer() { return &SceneAccess::drawItems; }
+	};
+}
+
 PaletteGraphicsView::PaletteGraphicsView(QWidget *parent) :
 	QGraphicsView(parent)
 {
@@ -37,18 +55,6 @@ PaletteGraphicsView::PaletteGraphicsView(QGraphicsScene *scene, QWidget *parent)
 	QGraphicsView(scene, parent)
 {
 	qApp->installEventFilter(this);
-	listenToScene(scene);
-}
-
-/**
-	@brief PaletteGraphicsView::setScene
-	Same as QGraphicsView::setScene, and keeps the scene's updates flowing
-	(see the class description).
-*/
-void PaletteGraphicsView::setScene(QGraphicsScene *scene)
-{
-	QGraphicsView::setScene(scene);
-	listenToScene(scene);
 }
 
 /**
@@ -70,21 +76,6 @@ void PaletteGraphicsView::paintingInverted(bool inverted)
 	Q_UNUSED(inverted)
 }
 
-/**
-	@brief PaletteGraphicsView::listenToScene
-	Connect a receiver to the scene's changed() signal, dropping the one
-	on the previous scene. Any receiver does; this one has nothing to do.
-	The connection dies with the view.
-*/
-void PaletteGraphicsView::listenToScene(QGraphicsScene *scene)
-{
-	disconnect(m_scene_connection);
-	m_scene_connection = QMetaObject::Connection();
-	if (scene)
-		m_scene_connection = connect(scene, &QGraphicsScene::changed,
-		                             this, [](const QList<QRectF> &) {});
-}
-
 /**
 	@brief PaletteGraphicsView::eventFilter
 	Repaint the whole viewport when the application palette changes. Qt
@@ -108,58 +99,122 @@ bool PaletteGraphicsView::eventFilter(QObject *watched, QEvent *event)
 */
 void PaletteGraphicsView::paintEvent(QPaintEvent *event)
 {
-	if (invertsLightness())
-		paintInverted(event->rect());
-	else
-		QGraphicsView::paintEvent(event);
+	if (invertsLightness() && !customBackgroundColor())
+	{
+		paintInverted(event);
+		return;
+	}
+	m_buffer = QImage();
+	QGraphicsView::paintEvent(event);
 }
 
 /**
 	@brief PaletteGraphicsView::paintInverted
-	Render \a area of the viewport into an off-screen image, invert the
-	lightness of that image between the palette's Base and Text colors and
-	blit it to the viewport. Inverting the finished rendering turns the
-	white sheet dark and the black ink light in one pass, and keeps the
-	hue of colored strokes.
-	@param area the part of the viewport to repaint, in viewport coordinates
+	Run QGraphicsView::paintEvent() with the drawing hooks redirected to
+	an off-screen image of the viewport, then invert the lightness of the
+	exposed part of that image between the palette's Base and Text colors
+	and blit it to the viewport. Inverting the finished rendering turns
+	the white sheet dark and the black ink light in one pass, and keeps
+	the hue of colored strokes. The image is in viewport coordinates, so
+	the hooks paint with the view's own transform and the scene records
+	the items' places in the viewport, as it does on a light palette.
+	@param event the paint event, for the exposed area
 */
-void PaletteGraphicsView::paintInverted(const QRect &area)
+void PaletteGraphicsView::paintInverted(QPaintEvent *event)
 {
-	const QRect rect = area.intersected(viewport()->rect());
-	if (rect.isEmpty())
+	const QRect exposed = event->rect().intersected(viewport()->rect());
+	if (exposed.isEmpty())
 		return;
 
 	const qreal ratio = viewport()->devicePixelRatioF();
-	QImage buffer(qCeil(rect.width() * ratio), qCeil(rect.height() * ratio),
-	              QImage::Format_RGB32);
-	buffer.setDevicePixelRatio(ratio);
-	// render() paints only what the scene draws; what it leaves blank is
+	const QSize size(qCeil(viewport()->width() * ratio), qCeil(viewport()->height() * ratio));
+	if (m_buffer.size() != size || m_buffer.devicePixelRatio() != ratio)
+	{
+		m_buffer = QImage(size, QImage::Format_RGB32);
+		m_buffer.setDevicePixelRatio(ratio);
+	}
+
+	m_buffer_painter.begin(&m_buffer);
+	// The hooks paint only what the scene draws; what they leave blank is
 	// the white sheet, which the inversion turns into the Base color.
-	buffer.fill(Qt::white);
+	m_buffer_painter.fillRect(exposed, Qt::white);
+	m_buffer_painter.setClipRect(exposed);
+	m_buffer_painter.setRenderHints(renderHints());
+	m_buffer_painter.setWorldTransform(viewportTransform());
 
-	QPainter buffer_painter(&buffer);
-	buffer_painter.setRenderHints(renderHints());
+	m_inverting = true;
 	paintingInverted(true);
-	render(&buffer_painter, QRectF(QPointF(0, 0), QSizeF(rect.size())),
-	       rect, Qt::IgnoreAspectRatio);
+	const OptimizationFlags flags = optimizationFlags();
+	setOptimizationFlag(QGraphicsView::IndirectPainting, true);
+	QGraphicsView::paintEvent(event);
+	setOptimizationFlags(flags);
 	paintingInverted(false);
-	buffer_painter.end();
+	m_inverting = false;
 
+	m_buffer_painter.end();
+	blitInverted(exposed);
+}
+
+/**
+	@brief PaletteGraphicsView::drawBackground
+	Into the off-screen image while painting inverted, else as
+	QGraphicsView.
+*/
+void PaletteGraphicsView::drawBackground(QPainter *painter, const QRectF &rect)
+{
+	QGraphicsView::drawBackground(m_inverting ? &m_buffer_painter : painter, rect);
+}
+
+/**
+	@brief PaletteGraphicsView::drawItems
+	Into the off-screen image while painting inverted, with the viewport
+	as the scene's widget (see SceneAccess), else as QGraphicsView.
+*/
+void PaletteGraphicsView::drawItems(QPainter *painter, int count, QGraphicsItem *items[],
+                                    const QStyleOptionGraphicsItem options[])
+{
+	if (m_inverting && scene())
+		(scene()->*SceneAccess::drawItemsPointer())(&m_buffer_painter, count, items, options, viewport());
+	else
+		QGraphicsView::drawItems(painter, count, items, options);
+}
+
+/**
+	@brief PaletteGraphicsView::drawForeground
+	Into the off-screen image while painting inverted, else as
+	QGraphicsView.
+*/
+void PaletteGraphicsView::drawForeground(QPainter *painter, const QRectF &rect)
+{
+	QGraphicsView::drawForeground(m_inverting ? &m_buffer_painter : painter, rect);
+}
+
+/**
+	@brief PaletteGraphicsView::blitInverted
+	Invert the lightness of \a area of the off-screen image and draw it on
+	the viewport, then the selection rubber band on top: the one
+	QGraphicsView::paintEvent() drew went under the blit.
+	@param area the part of the viewport to blit, in viewport coordinates
+*/
+void PaletteGraphicsView::blitInverted(const QRect &area)
+{
+	const qreal ratio = m_buffer.devicePixelRatio();
+	QImage part = m_buffer.copy(QRectF(area.topLeft() * ratio, area.size() * ratio).toAlignedRect());
+	part.setDevicePixelRatio(ratio);
 	// The application palette, for the reason given in invertsLightness().
 	const QPalette application_palette = QApplication::palette();
-	QET::Palette::invertLightness(buffer, application_palette.color(QPalette::Base),
+	QET::Palette::invertLightness(part, application_palette.color(QPalette::Base),
 	                              application_palette.color(QPalette::Text));
 
 	QPainter painter(viewport());
-	painter.drawImage(rect.topLeft(), buffer);
+	painter.drawImage(area.topLeft(), part);
 	drawRubberBand(painter);
 }
 
 /**
 	@brief PaletteGraphicsView::drawRubberBand
-	Draw the selection rubber band the way QGraphicsView::paintEvent does.
-	Rendering the view into an off-screen image skips it, so it is drawn
-	here instead, after the inversion, in the palette colors.
+	Draw the selection rubber band the way QGraphicsView::paintEvent does,
+	after the inversion, in the palette colors.
 	@param painter a painter on the viewport
 */
 void PaletteGraphicsView::drawRubberBand(QPainter &painter)

sources/palettegraphicsview.h

@@ -19,26 +19,39 @@
 #define PALETTE_GRAPHICS_VIEW_H
 
 #include <QGraphicsView>
-
-class QPainter;
+#include <QImage>
+#include <QPainter>
 
 /**
-	A QGraphicsView that shows its scene with inverted lightness while its
-	palette is dark: white becomes the palette's Base color, black its Text
-	color, and colored strokes keep their hue. The scene itself is left as
-	drawn, so printing and exporting it still give black on white. On a
-	light palette the view paints exactly as QGraphicsView does.
+	A QGraphicsView that shows its scene with inverted lightness while the
+	application palette is dark: white becomes the palette's Base color,
+	black its Text color, and colored strokes keep their hue. The scene
+	itself is left as drawn, so printing and exporting it still give black
+	on white. On a light palette the view paints exactly as QGraphicsView
+	does.
 
-	The view paints through QGraphicsView::render() into an image and blits
-	the inverted image. QGraphicsView delivers scene updates straight to
-	its viewport when nobody listens to QGraphicsScene::changed(), and in
-	that mode the scene clears its "update everything" flag only when the
-	items are painted straight onto the viewport, which never happens
-	here: from the second QGraphicsScene::update() on, every scene update
-	and every item update would wait for an unrelated repaint. So the view
-	listens to changed() on every scene it is given, which makes the scene
-	clear the flag before it emits. Set the scene through this class, not
-	through a QGraphicsView pointer.
+	On a dark palette the view still runs QGraphicsView::paintEvent(), with
+	the IndirectPainting flag set for the duration of that call, so that
+	the background, the items and the foreground come through the
+	drawBackground(), drawItems() and drawForeground() hooks. (That flag
+	selects Qt's older item-painting algorithm, which first builds a list
+	of the exposed items and their style options; it is set only while
+	the view paints inverted.) The hooks
+	paint into an off-screen image the size of the viewport, in viewport
+	coordinates; paintEvent() then inverts the lightness of the exposed
+	part of that image and blits it. Going through the real paint event,
+	and handing the scene the viewport when the items are drawn, keeps the
+	view on QGraphicsView's default update path, which erases a moved item
+	where it was last painted, children included, even a child whose
+	geometry is set while its parent is painted (a terminal's help lines).
+	The alternative, rendering with QGraphicsView::render(), needed a
+	receiver on QGraphicsScene::changed() to keep the scene's updates
+	flowing, and that receiver puts the scene on its Qt 4.4 compatibility
+	path, which erases only the moved item's own old rectangle: a moved
+	element then left its terminals' help lines, which span the whole
+	sheet, behind at every step (#954).
+
+	The CacheBackground cache mode is not supported on the inverted path.
 */
 class PaletteGraphicsView : public QGraphicsView
 {
@@ -48,14 +61,20 @@ class PaletteGraphicsView : public QGraphicsView
 		explicit PaletteGraphicsView(QWidget *parent = nullptr);
 		explicit PaletteGraphicsView(QGraphicsScene *scene, QWidget *parent = nullptr);
 
-		void setScene(QGraphicsScene *scene);
 		bool invertsLightness() const;
 
+		static void setCustomBackgroundColor(bool custom) { s_custom_bg = custom; }
+		static bool customBackgroundColor() { return s_custom_bg; }
+
 	protected:
 		bool eventFilter(QObject *watched, QEvent *event) override;
 		void paintEvent(QPaintEvent *event) override;
+		void drawBackground(QPainter *painter, const QRectF &rect) override;
+		void drawItems(QPainter *painter, int count, QGraphicsItem *items[],
+		               const QStyleOptionGraphicsItem options[]) override;
+		void drawForeground(QPainter *painter, const QRectF &rect) override;
 		/**
-			Called with true right before the scene is rendered for an
+			Called with true right before the scene is painted for an
 			inverted display and with false right after, so a scene can
 			adapt what it draws (a softer grid, for instance). Does
 			nothing by default.
@@ -63,11 +82,18 @@ class PaletteGraphicsView : public QGraphicsView
 		virtual void paintingInverted(bool inverted);
 
 	private:
-		void listenToScene(QGraphicsScene *scene);
-		void paintInverted(const QRect &area);
+		void paintInverted(QPaintEvent *event);
+		void blitInverted(const QRect &area);
 		void drawRubberBand(QPainter &painter);
 
-		QMetaObject::Connection m_scene_connection;
+		/// The off-screen image the hooks paint into while m_inverting:
+		/// the viewport's size, in its coordinates. Kept between paints,
+		/// dropped when the view paints on a light palette again.
+		QImage m_buffer;
+		QPainter m_buffer_painter;
+		/// True while paintEvent() paints for an inverted display.
+		bool m_inverting = false;
+		static inline bool s_custom_bg = false;
 };
 
 #endif