Merge pull request #869 from Kellermorph/fix-crossref-textfield

Clear stale xref data from PLC slave elementInformations on unlink and position change

.github/workflows/windows-build.yml

@@ -56,6 +56,7 @@ jobs:
             mingw-w64-ucrt-x86_64-extra-cmake-modules
             mingw-w64-ucrt-x86_64-nsis
             mingw-w64-ucrt-x86_64-angleproject
+            mingw-w64-ucrt-x86_64-qt6-declarative
 
       - name: Cache ccache
         uses: actions/cache@v5
@@ -217,10 +218,71 @@ jobs:
           cp -r "$GITHUB_WORKSPACE/examples"    "$FILES/examples"    || true
           cp -r "$GITHUB_WORKSPACE/fonts"       "$FILES/fonts"       || true
 
-          cp -r "$GITHUB_WORKSPACE/lang"        "$FILES/lang"        || true
-          find "$GITHUB_WORKSPACE/build" -name "*.qm" -exec cp {} "$FILES/lang/" \; 2>/dev/null || true
-          echo "=== .qm files in files/lang/ ==="
-          ls "$FILES/lang/"*.qm 2>/dev/null | wc -l || echo "0 .qm files"
+          # --- Translations ---
+          # Since PR #751 the .qm files are no longer tracked in git: lrelease
+          # generates them in build/lang/ (OUTPUT_LOCATION "lang", relative to
+          # the build dir). Expected set = the .ts listed in TS_FILES
+          # (cmake/qet_compilation_vars.cmake): a missing .qm fails the job
+          # instead of silently shipping an untranslated build; a .ts present
+          # in lang/ but not listed in TS_FILES only raises a warning.
+          # find/grep only, no shell glob: $GITHUB_WORKSPACE is a Windows path
+          # (D:\a\...) and its backslashes break glob patterns.
+          QM_SRC="$GITHUB_WORKSPACE/build/lang"
+          mkdir -p "$FILES/lang"
+          TS_LISTED=$(grep -o 'lang/qet_[A-Za-z_]*\.ts' "$GITHUB_WORKSPACE/cmake/qet_compilation_vars.cmake" \
+                        | sed -e 's#^lang/##' -e 's#\.ts$##' | LC_ALL=C sort -u || true)
+          [ -n "$TS_LISTED" ] || { echo "ERROR: cannot read TS_FILES from cmake/qet_compilation_vars.cmake"; exit 1; }
+          TS_PRESENT=$(find "$GITHUB_WORKSPACE/lang" -maxdepth 1 -name 'qet_*.ts' -exec basename {} .ts \; | LC_ALL=C sort)
+          UNLISTED=$(LC_ALL=C comm -13 <(echo "$TS_LISTED") <(echo "$TS_PRESENT"))
+          if [ -n "$UNLISTED" ]; then
+            echo "::warning::.ts files not in TS_FILES, no .qm built:" $UNLISTED
+          fi
+          find "$QM_SRC" -maxdepth 1 -name 'qet_*.qm' -exec cp {} "$FILES/lang/" \; 2>/dev/null || true
+          QM_PRESENT=$(find "$FILES/lang" -maxdepth 1 -name 'qet_*.qm' -exec basename {} .qm \; | LC_ALL=C sort)
+          MISSING=$(LC_ALL=C comm -23 <(echo "$TS_LISTED") <(echo "$QM_PRESENT"))
+          QM_COUNT=$(printf '%s\n' "$QM_PRESENT" | grep -c . || true)
+          TS_COUNT=$(printf '%s\n' "$TS_LISTED" | grep -c .)
+          echo "=== $QM_COUNT .qm files copied to files/lang/ (expected: $TS_COUNT) ==="
+          if [ -n "$MISSING" ]; then
+            echo "ERROR: missing translations:" $MISSING
+            find "$GITHUB_WORKSPACE/build" -name '*.qm' || true
+            exit 1
+          fi
+
+          # Qt's own translations (OK/Cancel buttons, standard dialogs...):
+          # they come from qtbase_XX.qm, not from QET's .ts, and windeployqt
+          # runs with --no-translations. QETApp::setLanguage() falls back to
+          # lang/qt_XX.qm, so copy each qtbase_XX.qm there under that name
+          # (qtbase_XX.qm is standalone, unlike Qt's qt_XX.qm meta catalogs).
+          QT_TR_DIR=/ucrt64/share/qt6/translations
+          if [ ! -d "$QT_TR_DIR" ]; then
+            QT_TR_DIR=$(cygpath -u "$(/ucrt64/bin/qtpaths6 --query QT_INSTALL_TRANSLATIONS 2>/dev/null)" 2>/dev/null || true)
+          fi
+          find "$QT_TR_DIR" -maxdepth 1 -name 'qtbase_*.qm' 2>/dev/null | while read -r f; do
+            l=$(basename "$f" .qm)
+            cp "$f" "$FILES/lang/qt_${l#qtbase_}.qm"
+          done
+          # QET languages Qt only ships with a region (pt -> pt_PT, zh -> zh_CN):
+          # QTranslator only shortens codes (fr_FR -> fr), it never extends them.
+          for q in $TS_LISTED; do
+            l=${q#qet_}
+            if [ ! -e "$FILES/lang/qt_$l.qm" ]; then
+              if [ -e "$QT_TR_DIR/qtbase_${l}_${l^^}.qm" ]; then
+                alt="$QT_TR_DIR/qtbase_${l}_${l^^}.qm"
+              else
+                alt=$(find "$QT_TR_DIR" -maxdepth 1 -name "qtbase_${l}_*.qm" 2>/dev/null | LC_ALL=C sort | head -1 || true)
+              fi
+              if [ -n "$alt" ]; then
+                cp "$alt" "$FILES/lang/qt_$l.qm"
+              fi
+            fi
+          done
+          QT_QM_COUNT=$(find "$FILES/lang" -maxdepth 1 -name 'qt_*.qm' | wc -l)
+          echo "=== $QT_QM_COUNT Qt translation files (qt_*.qm) copied from $QT_TR_DIR ==="
+          if [ "$QT_QM_COUNT" -eq 0 ]; then
+            echo "ERROR: no qtbase_*.qm found in '$QT_TR_DIR' (mingw-w64-ucrt-x86_64-qt6-translations installed?)"
+            exit 1
+          fi
 
           for f in LICENSE ChangeLog CREDIT README ELEMENTS.LICENSE; do
             cp "$GITHUB_WORKSPACE/$f" "$FILES/$f" 2>/dev/null || true

.gitignore

@@ -6,4 +6,5 @@
 doc/*
 !doc/QElectroTech.qch
 QElectroTech.tag
-!doc/doc-utils
+!doc/doc-utils
+lang/*.qm

CMakeLists.txt

@@ -19,7 +19,7 @@ include(cmake/hoto_update_cmake_message.cmake)
 cmake_minimum_required(VERSION 3.5...4.2)
 
 project(qelectrotech
-        VERSION 0.100.1
+        VERSION 0.200.1
         DESCRIPTION "QET is a CAD/CAE editor focusing on schematics drawing features."
         HOMEPAGE_URL "https://qelectrotech.org/"
         LANGUAGES C CXX)
@@ -36,7 +36,7 @@ set(QET_DIR ${PROJECT_SOURCE_DIR})
 # includes below, so every subdirectory and every FetchContent dependency
 # sees a consistent, already-defined value.
 if(NOT DEFINED QT_VERSION_MAJOR)
-    set(QT_VERSION_MAJOR 5)
+    set(QT_VERSION_MAJOR 6)
 endif()
 
 # Some third-party CMake projects we pull in via FetchContent (e.g.
@@ -109,6 +109,22 @@ if(QT_VERSION_MAJOR GREATER_EQUAL 6)
     endif()
 endif()
 
+# JavaScript scripting (bugtracker #162: `--run script.js`, and later a
+# "Run Script..." menu action) needs QJSEngine, in the Qml module. As with
+# QtPdf above, this is not fatal when missing: some minimal Qt6 packagings
+# may not ship it, and scripting is optional functionality nothing else in
+# the application depends on. When it's missing the feature is silently
+# disabled - see the QET_HAS_SCRIPTING guard in qetscripting.*.
+set(QET_HAS_SCRIPTING FALSE)
+find_package(Qt${QT_VERSION_MAJOR} QUIET COMPONENTS Qml)
+if(TARGET Qt${QT_VERSION_MAJOR}::Qml)
+    set(QET_HAS_SCRIPTING TRUE)
+    list(APPEND QET_PRIVATE_LIBRARIES Qt::Qml)
+    add_compile_definitions(QET_HAS_SCRIPTING)
+else()
+    message(STATUS "Qt Qml module not available: JavaScript scripting (--run) disabled")
+endif()
+
 find_package(SQLite3 REQUIRED)
 
 # CMake < 4.3 only creates the SQLite::SQLite3 target (no SQLite3::SQLite3
@@ -134,6 +150,7 @@ include(cmake/fetch_kdeaddons.cmake)
 option(PACKAGE_TESTS "Build the tests" ON)
 if(PACKAGE_TESTS)
     message("Add sub directory tests")
+    enable_testing()
     add_subdirectory(tests)
 endif()
 
@@ -163,7 +180,22 @@ else()
 endif()
 
 if(APPLE)
-    set_target_properties(${PROJECT_NAME} PROPERTIES MACOSX_BUNDLE TRUE)
+    # CFBundleIdentifier must not be empty. CMake's default Info.plist
+    # template fills it from MACOSX_BUNDLE_GUI_IDENTIFIER; with that unset
+    # the bundle ships an empty identifier, LaunchServices never registers
+    # the .app, and AppKit's open/save panel service (which is keyed on the
+    # client's bundle id) silently presents nothing -- every
+    # QFileDialog::getOpenFileName()/getSaveFileName() call returns an empty
+    # string without a panel ever appearing, so File > Open and File > Save
+    # as do nothing at all.
+    set_target_properties(${PROJECT_NAME} PROPERTIES
+        MACOSX_BUNDLE TRUE
+        MACOSX_BUNDLE_GUI_IDENTIFIER "org.qelectrotech.QElectroTech"
+        MACOSX_BUNDLE_BUNDLE_NAME "QElectroTech"
+        MACOSX_BUNDLE_BUNDLE_VERSION "${PROJECT_VERSION}"
+        MACOSX_BUNDLE_SHORT_VERSION_STRING "${PROJECT_VERSION}"
+        MACOSX_BUNDLE_COPYRIGHT "Copyright 2006-2026 The QElectroTech Team"
+    )
 endif()
 
 # The default build only compiles the tracked .ts files to .qm (lrelease).
@@ -174,7 +206,7 @@ endif()
 # fail with "Premature end of document".
 set_source_files_properties(
     ${TS_FILES}
-    PROPERTIES OUTPUT_LOCATION "${QET_DIR}/lang"
+    PROPERTIES OUTPUT_LOCATION "lang"
 )
 if(QT_VERSION_MAJOR EQUAL 6)
     if(Qt6_VERSION VERSION_LESS "6.2")

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = QElectroTech
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = " 0.100.0-dev"
+PROJECT_NUMBER         = " 0.200.1"
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

ELEMENTS.LICENSE

@@ -1,3 +1,20 @@
+[ca]
+La col·lecció d'elements que s'inclou amb QElectrotech es proporciona tal com és 
+i sense cap garantia que sigui adequada per al vostre ús o que funcioni correctament. 
+L'ús, la modificació i la integració d'aquests elements en esquemes elèctrics 
+estan permesos sense restriccions, independentment de la llicència final que regeixi 
+els esquemes.
+No es permet utilitzar aquest programari ni cap fitxer associat
+com a dades de mostra per crear models d'aprenentatge automàtic.
+
+Si redistribuïu la totalitat o una part de la col·lecció QElectroTech, 
+amb o sense modificacions, fora d'un esquema elèctric, heu de complir 
+les condicions de la llicència CC-BY:
+Aquesta obra està subjecta a la llicència Reconeixement 3.0,
+disponible en línia a http://creativecommons.org/licenses/by/3.0/ o bé
+sol·licitant-la per correu a Creative Commons, 171 Second Street, Suite 300, San Francisco,
+Califòrnia 94105, EUA.
+
 [en]
 The elements collection provided along with QElectroTech is provided as is and
 without any warranty of fitness for your purpose or working.
@@ -96,19 +113,6 @@ Para ver una copia de esta licencia, visite
 http://creativecommons.org/licenses/by/3.0/ o envie una carta a Creative
 Commons, 171 Second Street, Suite 300, San Francisco, California 94105, USA.
 
-[ca]
-La col·lecció de símbols QElectrotech és distribuïda tal qual i sense cap
-garantia d'idoneïtat d'ús ni de funcionament.
-Es permet incondicionalment, amb independència de la llicència final, emprar,
-editar, i incloure aquests símbols en esquemes elèctrics.
-Si vostè redistribueix una part de la col·lecció de QElectrotech o tota ella,
-amb condicions o sense, separadament d'un esquema elèctric, haurà de respectar
-les condicions de la llicència CC-BY:
-Aquesta obra es troba sota una llicència Reconeixement 3.0 de Creative Commons.
-Per veure una còpia d'aquesta llicència visiti
-http://creativecommons.org/licenses/by/3.0/ o enviï una carta a Creative
-Commons, 171 Second Street, Suite 300, San Francisco, California 94105, 
-
 [cs]
 Sbírka prvků poskytovaná společně s QElectroTechem je poskytována tak, jak je,
 bez záruky nebo vhodnosti pro váš účal nebo práci.

README.md

@@ -48,8 +48,8 @@ Here are the technical choices made for the software development:
 *   Coding language: [C++](https://en.wikipedia.org/wiki/C%2B%2B)
 *   GUI translations: [Qt Linguist](http://doc.qt.io/qt-5/qtlinguist-index.html)
 *   Version control: [GIT](https://github.com/qelectrotech/qelectrotech-source-mirror.git)
-*   Doxygen documentation :[Doxygen](https://qelectrotech.github.io/qelectrotech-source-mirror/)
-*   QtCreator qch doxygen :[QElectroTech.qch](https://github.com/qelectrotech/qelectrotech-source-mirror/blob/master/doc/QElectroTech.qch)
+*   Doxygen documentation :[Doxygen](https://download.qelectrotech.org/qet/doxygen/html/)
+*   QtCreator qch doxygen :[QElectroTech.qch](https://download.qelectrotech.org/qet/doxygen/QElectroTech.qch)
 *   File format for projects, elements and titleblocks: [XML](http://www.w3schools.com/xml/xml_whatis.asp)
 *   Main development platform: [GNU/Linux](http://getgnulinux.org/en/linux/)
 *   Targeted platforms: Windows, GNU/Linux, Mac OS X, BSDs

build-aux/snap/snapcraft.yaml

@@ -73,6 +73,7 @@ parts:
       - git
       - sqlite3
       - xdg-user-dirs
+      - libqt6qml6
       # libxcb-cursor0 workaround was needed against the Qt5/KF5 core22 content
       # snap (issue #373). Not yet re-verified against kf6-core24 — remove this
       # if the Qt6 xcb platform plugin loads cleanly without it.
@@ -84,7 +85,13 @@ parts:
       - libsqlite3-dev
       - qt6-tools-dev
       - qt6-base-private-dev
+      - qt6-declarative-dev
       - pkgconf
+      # Qt6 PrintSupport records Cups::Cups as a third-party dependency
+      # (qprint_p.h includes <cups/ppd.h>), so find_package(Qt6 PrintSupport)
+      # runs FindCups at configure time and fails without the CUPS headers.
+      # Build-time only: nothing from it is staged into the snap.
+      - libcups2-dev
     override-build: |
       displayed_version=$(cat sources/qetversion.cpp | grep "return QVersionNumber{"| head -n 1| awk -F "{" '{ print $2 }' | awk -F "}" '{ print $1 }' | sed -e 's/,/./g' -e 's/ //g')
       snap_version="${displayed_version}-g$(git rev-parse --short=8 HEAD)"

cmake/fetch_pugixml.cmake

@@ -26,7 +26,7 @@ if(BUILD_PUGIXML)
     pugixml
     GIT_REPOSITORY https://github.com/zeux/pugixml.git
     GIT_TAG        v1.15)
-
+  set(PUGIXML_INSTALL OFF CACHE INTERNAL "")
   FetchContent_MakeAvailable(pugixml)
 else()
   find_package(pugixml REQUIRED)

cmake/qet_compilation_vars.cmake

@@ -174,7 +174,11 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/conductornumexport.cpp
   ${QET_DIR}/sources/wiringlistexport.h
   ${QET_DIR}/sources/wiringlistexport.cpp
+  ${QET_DIR}/sources/ui/wiringlistdialog.h
+  ${QET_DIR}/sources/ui/wiringlistdialog.cpp
   ${QET_DIR}/sources/conductornumexport.h
+  ${QET_DIR}/sources/bomexport.cpp
+  ${QET_DIR}/sources/bomexport.h
   ${QET_DIR}/sources/conductorprofile.cpp
   ${QET_DIR}/sources/conductorprofile.h
   ${QET_DIR}/sources/conductorproperties.cpp
@@ -245,6 +249,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/qet.h
   ${QET_DIR}/sources/qeticons.cpp
   ${QET_DIR}/sources/qeticons.h
+  ${QET_DIR}/sources/qetpalette.cpp
+  ${QET_DIR}/sources/qetpalette.h
   ${QET_DIR}/sources/qetinformation.cpp
   ${QET_DIR}/sources/qetinformation.h
   ${QET_DIR}/sources/qetmainwindow.cpp
@@ -326,6 +332,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/diagramevent/diagrameventinterface.h
   ${QET_DIR}/sources/diagramevent/diagrameventaddmacro.cpp
   ${QET_DIR}/sources/diagramevent/diagrameventaddmacro.h
+  ${QET_DIR}/sources/diagramevent/diagrameventaddpaste.cpp
+  ${QET_DIR}/sources/diagramevent/diagrameventaddpaste.h
 
   ${QET_DIR}/sources/dvevent/dveventinterface.cpp
   ${QET_DIR}/sources/dvevent/dveventinterface.h
@@ -473,6 +481,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/project/projectusagetracker.cpp
   ${QET_DIR}/sources/project/projectusagetracker.h
 
+  ${QET_DIR}/sources/properties/deviceinformation.cpp
+  ${QET_DIR}/sources/properties/deviceinformation.h
   ${QET_DIR}/sources/properties/elementdata.cpp
   ${QET_DIR}/sources/properties/elementdata.h
   ${QET_DIR}/sources/properties/propertiesinterface.cpp
@@ -841,6 +851,20 @@ if(QT_VERSION_MAJOR GREATER_EQUAL 6)
   )
 endif()
 
+# JavaScript scripting (bugtracker #162). Unconditionally in the source
+# list, like the QtPdf files above: this file is included before the
+# QET_HAS_SCRIPTING probe runs in the top-level CMakeLists.txt, so the
+# variable isn't set yet here. Same pattern as QtPdf: always compiled, the
+# actual Qt::Qml dependent code is behind #ifdef QET_HAS_SCRIPTING inside
+# qetscripting.cpp/qetscriptapi.cpp themselves, compiling to a harmless
+# stub when the module wasn't found.
+list(APPEND QET_SRC_FILES
+  ${QET_DIR}/sources/scripting/qetscriptapi.cpp
+  ${QET_DIR}/sources/scripting/qetscriptapi.h
+  ${QET_DIR}/sources/scripting/qetscripting.cpp
+  ${QET_DIR}/sources/scripting/qetscripting.h
+)
+
 set(TS_FILES
   ${QET_DIR}/lang/qet_ar.ts
   ${QET_DIR}/lang/qet_ca.ts
@@ -856,6 +880,7 @@ set(TS_FILES
   ${QET_DIR}/lang/qet_hu.ts
   ${QET_DIR}/lang/qet_it.ts
   ${QET_DIR}/lang/qet_ja.ts
+  ${QET_DIR}/lang/qet_ko.ts
   ${QET_DIR}/lang/qet_mn.ts
   ${QET_DIR}/lang/qet_nb.ts
   ${QET_DIR}/lang/qet_nl.ts

docs/smart-device-bom.md

@@ -0,0 +1,93 @@
+# Smart Device Information and BOM CSV
+
+## Architecture
+
+- A `.qet` project is XML. Placed component properties are held in
+  `ElementData::m_informations`, a `DiagramContext`, and are serialized by the
+  existing `Element::fromXml()` and `Element::toXml()` path.
+- `DeviceInformation` is a typed view over that existing context. It does not
+  introduce a second data store. Updates made by the properties editor continue
+  to use `ChangeElementInformationCommand`, including undo/redo and dirty state.
+- The project database copies element contexts into `element_info` and exposes
+  reporting fields through `element_nomenclature_view`.
+- GUI and CLI BOM exports both use `BomExport::defaultQuery()` against that
+  view. The existing `BOMExportDialog` remains the only GUI export entry point;
+  users can still customize columns, filters, and grouped/ungrouped output.
+
+## Device Properties
+
+| Device field | XML/context key | Default BOM |
+| --- | --- | --- |
+| Device tag | `label` | Yes |
+| Manufacturer | `manufacturer` | Yes |
+| Part number | `manufacturer_reference` | Yes |
+| Model | `model` | Yes |
+| Description | `description` | Yes |
+| Category | `category` | Yes |
+| Quantity | `quantity` | Yes |
+| Voltage rating | `voltage_rating` | Yes |
+| Current rating | `current_rating` | Yes |
+| Page | `folio` from the diagram | Yes |
+| Notes | `notes` | Yes |
+
+The five new context keys are `model`, `category`, `voltage_rating`,
+`current_rating`, and `notes`. They are available in the existing information
+editor for Simple and Master elements, in symbol definitions, in the SQL
+nomenclature view, and in the export column picker.
+
+No XML version bump or migration is required. Missing keys read as empty
+strings, empty properties are omitted by the existing writer, and unknown
+context keys remain preserved. Quantity and ratings stay free text so existing
+unit conventions and decimal quantities are not changed implicitly.
+
+## BOM Policy
+
+The default BOM query exports one row per Simple or Master element. Slave
+contacts, terminal-strip elements, reports, thumbnails, and conductor
+definitions are excluded. A Master device is counted once and PLC I/O entries
+are not expanded. The existing `exclude_from_bom` property is honored by the
+SQL view, including common true representations (`true`, `1`, `yes`, `on`).
+
+The default columns are:
+
+`Device tag, Designation, Manufacturer, Part number, Model, Description,
+Category, Quantity, Voltage rating, Current rating, Page, Notes`.
+
+The existing **Format as bill of materials** checkbox provides grouped output;
+it is off by default so the initial export remains ungrouped. Users may change
+the query and column order through the existing dialog. The command-line
+`--export-bom` operation uses the same default query and column order.
+
+CSV output is UTF-8 with a BOM, semicolon-delimited, and quotes every field.
+Embedded quotes are doubled and embedded newlines are retained. `QSaveFile`
+provides atomic replacement; query, open, write, and commit failures are
+reported without deleting an existing destination first.
+
+## Verification
+
+The smart-device test is registered explicitly in
+`tests/qttest/CMakeLists.txt` and uses only Qt Test and Qt SQL. It is therefore
+part of the normal cross-platform CMake/CTest flow:
+
+```sh
+cmake -S . -B build -DPACKAGE_TESTS=ON
+cmake --build build
+ctest --test-dir build --output-on-failure
+```
+
+`tst_smart_device` checks the metadata column contract, Simple/Master filtering,
+stable page ordering, UTF-8 with Latin and non-Latin samples, CSV escaping, and
+atomic write success/failure. Existing project XML save/load tests cover the
+generic `DiagramContext` persistence path used by the new keys.
+
+Manual checks:
+
+1. Open an existing project and edit a Simple or Master element's information.
+2. Set all device fields, apply, undo, redo, save, close, and reopen.
+3. Open Project > Export as CSV and verify the device columns are preselected.
+4. Export with grouping both disabled and enabled.
+5. Verify leading-zero part numbers, non-Latin text, quotes, and newlines in a
+   UTF-8 CSV reader.
+
+Cable management, terminal-strip planning, automatic wire numbering, PLC I/O
+expansion, panel layout, and manufacturer catalog integration are out of scope.

misc/Info.plist

@@ -42,7 +42,7 @@
 	<key>CFBundleIconFile</key>
 	<string>qelectrotech</string>
 	<key>CFBundleIdentifier</key>
-	<string>org.qelectrotech</string>
+	<string>org.qelectrotech.QElectroTech</string>
 	<key>CFBundleInfoDictionaryVersion</key>
 	<string>6.0</string>
 	<key>CFBundlePackageType</key>

misc/MacQetDeploy.sh

@@ -1,337 +0,0 @@
-#!/bin/sh
-    # Copyright 2019 The QElectroTech Team
-    # This file is part of QElectroTech.
-    
-    # QElectroTech is free software: you can redistribute it and/or modify
-    # it under the terms of the GNU General Public License as published by
-    # the Free Software Foundation, either version 2 of the License, or
-    # (at your option) any later version.
-    
-    # QElectroTech is distributed in the hope that it will be useful,
-    # but WITHOUT ANY WARRANTY; without even the implied warranty of
-    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    # GNU General Public License for more details.
-    
-    # You should have received a copy of the GNU General Public License
-    # along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
- # Need homebrew and coreutils installed see <http://brew.sh>.
-
- 
-#Force MacOSX12.3.sdk
-#see: https://www.downtowndougbrown.com/2023/08/how-to-create-a-qt-5-arm-intel-universal-binary-for-mac/
-
-export DEVELOPER_DIR=/Applications/Xcode_14.01.app/Contents/Developer
-
-# configuration
-APPNAME='qelectrotech'
-BUNDLE=$APPNAME.app
-APPBIN="$BUNDLE/Contents/MacOS/$APPNAME"
-
-# Emplacement du script
-current_dir=$(dirname "$0")
-
-# On se remet au depart 
-cd "${current_dir}/../"
-
-# Emplacement courant
-current_dir=$(PWD)
-
-
-### get system configuration ########################################
-
-echo
-echo "______________________________________________________________"
-echo "This script prepares a Qt application bundle for deployment."
-echo "Please see the \"Deploying an Application on Qt/Mac\""
-echo "page in the Qt documentation for more information."
-echo
-echo "This script :"
-echo "\t - up date the svn depot"
-echo "\t - built the application bundle,"
-echo "\t - copy over required Qt frameworks,"
-echo "\t - copy additional files: translations, titleblocks and elements,"
-echo "\t - create image disk."
-echo
-echo "Enjoy ;-)"
-echo
-
-# as long as we can find qmake, we don't need QTDIR
-FWPATH=`qmake -query QT_INSTALL_LIBS`
-if [ ! -d $FWPATH/QtGui.framework ] ; then
-    echo "ERROR: cannot find the Qt frameworks. Make sure Qt is installed"
-    echo "and qmake is in your environment path."
-    exit
-fi
-
-
-### GIT ####################################################
-
-echo
-echo "______________________________________________________________"
-echo "Run GIT:"
-
-# recupere le numero de la dernière revision
-# Si il y a ':' garde la 2e partie
-# Remplace les lettres par 'rien'
-#revAv=$(svnversion | cut -d : -f 2 | tr -d '[:alpha:]')
-
-# Fait une mise à jour
-git submodule init
-git submodule update
-git pull --recurse-submodules
-git pull
-#git checkout foliolist_position
-
-# recupere le numero de la nouvelle revision
-
-GITCOMMIT=$(git rev-parse --short HEAD)
-A=$(git rev-list HEAD --count)
-HEAD=$(($A+473))
-
-
-VERSION=$(cat sources/qetversion.cpp | grep "return QVersionNumber{"| head -n 1| awk -F "{" '{ print $2 }' | awk -F "}" '{ print $1 }' | sed -e 's/,/./g' -e 's/ //g')
-#VERSION=$(cat sources/qetversion.cpp | grep "return QVersionNumber{ 0, "| head -n 1| cut -c25-35| sed -e 's/,/./g' -e 's/ //g')   #Find major, minor, and micro version numbers in sources/qetversion.cp
-
-# Dmg de la dernière revision déjà créé
-if [ -e "build-aux/mac-osx/${APPNAME} $VERSION r$HEAD.dmg" ] ; then
-    echo "There are not new updates, make disk image can"
-    echo "take a lot of time (5 min). Can you continu?"
-    echo  "[y/n]"
-    read userinput
-    if  [ "$userinput" == "n" ] ; then
-        echo
-        echo "Process is stopped."
-        echo
-        exit
-    fi
-fi
-
-
-### make install ####################################################
-
-echo
-echo "______________________________________________________________"
-echo "Run make install:"
-
-# pour effacer l’ancienne compilation
-if [ -d $BUNDLE ] ; then
-    echo "Removing hold bundle..."
-    rm -rf $BUNDLE
-fi
-if [ -e Makefile ] ; then
-    echo "Removing hold Makefile..."
-    make clean
-fi
-
-# genere le Makefile
-echo "Generating new makefile..."
-qmake -spec macx-clang 
-
-# compilation
-if [ -e Makefile.Release ] ; then
-	START_TIME=$SECONDS
-    
-    # arret du script si erreur de compilation
-    testSuccessBuild () {
-        if [ $? -ne 0 ]; then 
-            cleanVerionTag
-            ELAPSED_TIME=$(($SECONDS - $START_TIME))
-            echo
-            echo "make failed - $(($ELAPSED_TIME/60)) min $(($ELAPSED_TIME%60)) sec"
-            exit 1
-        fi
-    }
-
-    # utilise tout les coeurs pour une compilation plus rapide
-    coeur=$(sysctl hw.ncpu | awk '{print $2}')
-    if [ $? -ne 0 ]; then 
-        make -f Makefile.Release
-        testSuccessBuild
-    else
-        make -j$(($coeur + 1)) -f Makefile.Release
-        testSuccessBuild
-    fi
-	
-    cleanVerionTag
-	ELAPSED_TIME=$(($SECONDS - $START_TIME))
-	echo
-	echo "The time of compilation is $(($ELAPSED_TIME/60)) min $(($ELAPSED_TIME%60)) sec" 
-else
-    echo "ERROR: Makefile not found. This script requires the macx-clang makespec"
-    exit
-fi
-
-cp -R ${current_dir}/misc/Info.plist qelectrotech.app/Contents/
-cp -R ${current_dir}/ico/mac_icon/*.icns qelectrotech.app/Contents/Resources/
-# On rajoute le numero de version pour "cmd + i"
-/usr/libexec/PlistBuddy -c "Set :CFBundleShortVersionString $VERSION r$HEAD" "qelectrotech.app/Contents/Info.plist"  # Version number
-
-### copy over frameworks ############################################
-
-echo
-echo "______________________________________________________________"
-echo "Copy Qt libraries and private frameworks:"
-
-echo "Processing Mac deployment tool..." 
-if [ ! -d $BUNDLE ] ; then
-    echo "ERROR: cannot find application bundle \"$BUNDLE\" in current directory"
-    exit
-fi
-#~/Qt/5.5/clang_64/bin/macdeployqt $BUNDLE
-macdeployqt $BUNDLE
-
-### add file missing #######################################
-
-echo
-echo "______________________________________________________________"
-echo "Copy file missing:"
-
-# Dossier à ajouter
-QET_ELMT_DIR="${current_dir}/elements/"
-QET_TBT_DIR="${current_dir}/titleblocks/"
-QET_LANG_DIR="${current_dir}/lang/"
-QET_FONTS_DIR="${current_dir}/fonts/"
-QET_LICENSES_DIR="${current_dir}/licenses/"
-
-# Add new folder for Qt dialog translation see
-## see <https://download.tuxfamily.org/qet/Qt_lang/>.
-
-LANG_DIR="${current_dir}/lang1/"
-
-if [ -d "${QET_ELMT_DIR}" ]; then
-    echo "Copying add elements in the bundle..."
-    #mkdir $BUNDLE/Contents/Resources/elements
-    cp -R ${QET_ELMT_DIR} $BUNDLE/Contents/Resources/elements
-fi
-
-if [ -d "${QET_TBT_DIR}" ]; then
-    echo "Copying titleblocks in the bundle..."
-    #mkdir $BUNDLE/Contents/Resources/titleblocks
-    cp -R ${QET_TBT_DIR} $BUNDLE/Contents/Resources/titleblocks
-fi
-
-if [ -d "${QET_LANG_DIR}" ]; then
-    echo "Copying translations in the bundle... "
-    mkdir $BUNDLE/Contents/Resources/lang
-    cp ${current_dir}/lang/*.qm $BUNDLE/Contents/Resources/lang
-fi
-
-if [ -d "${LANG_DIR}" ]; then
-   echo "Copying translations in the bundle... "
-   cp ${current_dir}/lang1/*.qm $BUNDLE/Contents/Resources/lang
-
-fi
-
-if [ -d "${QET_FONTS_DIR}" ]; then
-   echo "Copying fonts in the bundle... "
-   mkdir $BUNDLE/Contents/Resources/fonts
-   cp ${current_dir}/fonts/*.ttf $BUNDLE/Contents/Resources/fonts
-
-fi
-
-if [ -d "${QET_LICENSES_DIR}" ]; then
-    echo "Copying licenses in the bundle..."
-    mkdir $BUNDLE/Contents/Resources/licenses
-    cp -R -L ${QET_LICENSES_DIR} $BUNDLE/Contents/Resources/licenses
-fi
-### create disk image ###############################################
-
-echo
-echo "______________________________________________________________"
-echo "Create disk image:"
-
-# Direction
-EX_Dir="examples"
-DOC_Dir="docs/Documentation.webloc"
-imagedir="/tmp/$APPNAME.$$"
-
-# Remove any previous disk folder or DMG
-echo 'Preparing (removing hold files)... '
-if [ -e "/Volumes/${APPNAME}" ]; then
-    hdiutil detach -quiet "/Volumes/${APPNAME}"
-fi
-if [ -e "${APPNAME} $VERSION r$HEAD.dmg" ] ; then
-    rm -f "${APPNAME} $VERSION r$HEAD.dmg"
-fi
-if [ -e "build-aux/mac-osx/${APPNAME} $VERSION r$HEAD.dmg" ] ; then
-    rm -f "build-aux/mac-osx/${APPNAME} $VERSION r$HEAD.dmg"
-fi
-if [ -e $imagedir ] ; then
-    rm -rf $imagedir
-fi
-
-# Create disk folder
-echo 'Copying application bundle and examples... '
-mkdir $imagedir
-cp -Rf $BUNDLE $imagedir
-cp -Rf $EX_Dir $imagedir
-if [ -e $DOC_Dir ] ; then
-    cp $DOC_Dir $imagedir
-else
-    echo "Documentation in ${DOC_Dir} not find."
-fi
-ln -s /Applications $imagedir/Applications
-
-# Elimine les accents, symbole ...
-strip "$imagedir/$APPBIN"
-    
-# Creating a disk image from a folder
-echo 'Creating disk image... '
-hdiutil create -quiet -ov -srcfolder $imagedir -format UDBZ -volname "${APPNAME}" "${APPNAME} $VERSION r$HEAD.dmg"
-hdiutil internet-enable -yes -quiet "${APPNAME} $VERSION r$HEAD.dmg"
-
-# Clean up disk folder
-echo 'Cleaning up... '
-cp -Rf "${APPNAME} $VERSION r$HEAD.dmg" "build-aux/mac-osx/${APPNAME}-$VERSION-r$HEAD-intel_X86_64.dmg"
-rm -f "${APPNAME} $VERSION r$HEAD.dmg"
-rm -rf $imagedir
-rm -rf $BUNDLE
-
-
-### The end, process is done ##########################################
-
-echo
-echo "______________________________________________________________"
-echo "The process of creating deployable application bundle is done."
-echo The disque image is in the folder \'build-aux/mac-osx\'.
-# Affiche les mise à jour depuis l'ancienne revision 
-#if [ ! $(($HEAD - $revAv)) -eq 0 ] ; then
-#    echo
-#    echo "There are new updates. This numero of revision is $HEAD."
- #   svn log -l $(($HEAD - $revAv))
-#else
- #   echo
-#    echo "There are not new updates. This numero of revision is $HEAD."
-# fi
-# echo
-
-# La version en local n'est pas conforme à la dernière version svn
-# svnversion | grep -q '[MS:]' ; if [ $? -eq 0 ] ; then 
-#     echo Please note that the latest \local version is $(svnversion).
-#     echo This is not the same version as the deposit. 
-#     echo You can use \'svn diff\' to see the differences. 
-#     echo And use \'svn revert \<fichier\>\' to delete the difference. 
-#     echo To go back, you can use svn update -r 360 
-#     echo to go to revision number 360.
-#     echo
-#fi 
-
-
-
-#rsync to TF DMG builds
-echo  -e "\033[1;31mWould you like to upload MacOS packages "${APPNAME}"-"$VERSION"_"r$HEAD-intel.dmg", n/Y?.\033[m"
-read a
-if [[ $a == "Y" || $a == "y" ]]; then
-cp -Rf "build-aux/mac-osx/${APPNAME}-$VERSION-r$HEAD-intel_X86_64.dmg" /Users/laurent/MAC_OS_X/
-rsync -e ssh -av --delete-after --no-owner --no-g --chmod=g+w --progress --exclude='.DS_Store' /Users/laurent/MAC_OS_X/ server:download.qelectrotech.org/qet/builds/MAC_OS_X/intel_X86_64/
-if [ $? != 0 ]; then
-{
-echo "RSYNC ERROR: problem syncing ${APPNAME}-$VERSION-r$HEAD-intel_X86_64.dmg"
-rsync -e ssh -av --delete-after --no-owner --no-g --chmod=g+w --progress --exclude='.DS_Store' /Users/laurent/MAC_OS_X/ server:download.qelectrotech.org/qet/builds/MAC_OS_X/intel_X86_64/
-
-} fi
-
-else
-echo  -e "\033[1;33mExit.\033[m"
-
-fi

misc/MacQetDeploy_arm64.sh

@@ -1,509 +0,0 @@
-#!/bin/sh
-    # Copyright 2023 The QElectroTech Team
-    # This file is part of QElectroTech.
-    
-    # QElectroTech is free software: you can redistribute it and/or modify
-    # it under the terms of the GNU General Public License as published by
-    # the Free Software Foundation, either version 2 of the License, or
-    # (at your option) any later version.
-    
-    # QElectroTech is distributed in the hope that it will be useful,
-    # but WITHOUT ANY WARRANTY; without even the implied warranty of
-    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    # GNU General Public License for more details.
-    
-    # You should have received a copy of the GNU General Public License
-    # along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
- # Need homebrew and coreutils installed see <http://brew.sh>.
-
-#Force MacOSX12.3.sdk
-#see: https://www.downtowndougbrown.com/2023/08/how-to-create-a-qt-5-arm-intel-universal-binary-for-mac/
-
-export DEVELOPER_DIR=/Applications/Xcode_14.01.app/Contents/Developer
-
-# configuration
-APPNAME='qelectrotech'
-BUNDLE=$APPNAME.app
-APPBIN="$BUNDLE/Contents/MacOS/$APPNAME"
-IDENTITY="Developer ID Application: Laurent TRINQUES (Y73WZ6WZ5X)"
-
-# Temp paths
-RW_DMG="/tmp/qet_rw.dmg"
-MOUNT_POINT="/tmp/qet_dmg_mount"
-STAGING="/tmp/qet_dmg_staging"
-
-# Script location
-current_dir=$(dirname "$0")
-
-# Go back to repo root
-cd "${current_dir}/../"
-
-# Current directory
-current_dir=$(PWD)
-
-
-### get system configuration ########################################
-
-echo
-echo "______________________________________________________________"
-echo "This script prepares a Qt application bundle for deployment."
-echo "Please see the \"Deploying an Application on Qt/Mac\""
-echo "page in the Qt documentation for more information."
-echo
-echo "This script :"
-echo "\t - update the git depot"
-echo "\t - build the application bundle,"
-echo "\t - copy over required Qt frameworks,"
-echo "\t - copy additional files: translations, titleblocks and elements,"
-echo "\t - notarize the .app, then create a signed DMG."
-echo
-echo "Enjoy ;-)"
-echo
-
-# as long as we can find qmake, we don't need QTDIR
-FWPATH=`qmake -query QT_INSTALL_LIBS`
-if [ ! -d $FWPATH/QtGui.framework ] ; then
-    echo "ERROR: cannot find the Qt frameworks. Make sure Qt is installed"
-    echo "and qmake is in your environment path."
-    exit
-fi
-
-
-### GIT ####################################################
-
-echo
-echo "______________________________________________________________"
-echo "Run GIT:"
-
-git submodule init
-git submodule update
-git pull --recurse-submodules
-git pull
-
-# Get revision number and version
-GITCOMMIT=$(git rev-parse --short HEAD)
-A=$(git rev-list HEAD --count)
-HEAD=$(($A+473))
-
-VERSION=$(cat sources/qetversion.cpp | grep "return QVersionNumber{"| head -n 1| awk -F "{" '{ print $2 }' | awk -F "}" '{ print $1 }' | sed -e 's/,/./g' -e 's/ //g')
-
-DMG_NAME="${APPNAME}-$VERSION-r$HEAD-arm64.dmg"
-DMG_PATH="build-aux/mac-osx/$DMG_NAME"
-
-# Check if already built
-if [ -e "$DMG_PATH" ] ; then
-    echo "There are not new updates, make disk image can"
-    echo "take a lot of time (5 min). Can you continu?"
-    echo  "[y/n]"
-    read userinput
-    if  [ "$userinput" == "n" ] ; then
-        echo
-        echo "Process is stopped."
-        echo
-        exit
-    fi
-fi
-
-
-### make install ####################################################
-
-echo
-echo "______________________________________________________________"
-echo "Run make install:"
-
-# Remove old bundle
-if [ -d $BUNDLE ] ; then
-    echo "Removing old bundle..."
-    rm -rf $BUNDLE
-fi
-if [ -e Makefile ] ; then
-    echo "Removing old Makefile..."
-    rm .qmake.stash
-    make clean
-fi
-
-# Generate Makefile
-echo "Generating new makefile..."
-qmake -spec macx-clang
-
-# Compile
-if [ -e Makefile.Release ] ; then
-    START_TIME=$SECONDS
-
-    testSuccessBuild () {
-        if [ $? -ne 0 ]; then
-            cleanVerionTag
-            ELAPSED_TIME=$(($SECONDS - $START_TIME))
-            echo
-            echo "make failed - $(($ELAPSED_TIME/60)) min $(($ELAPSED_TIME%60)) sec"
-            exit 1
-        fi
-    }
-
-    coeur=$(sysctl hw.ncpu | awk '{print $2}')
-    if [ $? -ne 0 ]; then
-        make -f Makefile.Release
-        testSuccessBuild
-    else
-        make -j$(($coeur + 1)) -f Makefile.Release
-        testSuccessBuild
-    fi
-
-    ELAPSED_TIME=$(($SECONDS - $START_TIME))
-    echo
-    echo "The time of compilation is $(($ELAPSED_TIME/60)) min $(($ELAPSED_TIME%60)) sec"
-else
-    echo "ERROR: Makefile not found. This script requires the macx-clang makespec"
-    exit
-fi
-
-cp -R ${current_dir}/misc/Info.plist qelectrotech.app/Contents/
-cp -R ${current_dir}/ico/mac_icon/*.icns qelectrotech.app/Contents/Resources/
-/usr/libexec/PlistBuddy -c "Set :CFBundleShortVersionString $VERSION r$HEAD" "qelectrotech.app/Contents/Info.plist"
-
-
-### copy over frameworks ############################################
-
-echo
-echo "______________________________________________________________"
-echo "Copy Qt libraries and private frameworks:"
-
-echo "Processing Mac deployment tool..."
-if [ ! -d $BUNDLE ] ; then
-    echo "ERROR: cannot find application bundle \"$BUNDLE\" in current directory"
-    exit
-fi
-macdeployqt $BUNDLE
-
-### add missing files ###############################################
-
-echo
-echo "______________________________________________________________"
-echo "Copy missing files:"
-
-QET_ELMT_DIR="${current_dir}/elements/"
-QET_TBT_DIR="${current_dir}/titleblocks/"
-QET_LANG_DIR="${current_dir}/lang/"
-QET_EXAMPLES_DIR="${current_dir}/examples/"
-QET_FONTS_DIR="${current_dir}/fonts/"
-QET_LICENSES_DIR="${current_dir}/licenses/"
-LANG_DIR="${current_dir}/lang1/"
-
-if [ -d "${QET_ELMT_DIR}" ]; then
-    echo "Copying elements in the bundle..."
-    cp -R ${QET_ELMT_DIR} $BUNDLE/Contents/Resources/elements
-fi
-
-if [ -d "${QET_TBT_DIR}" ]; then
-    echo "Copying titleblocks in the bundle..."
-    cp -R ${QET_TBT_DIR} $BUNDLE/Contents/Resources/titleblocks
-fi
-
-if [ -d "${QET_LANG_DIR}" ]; then
-    echo "Copying translations in the bundle..."
-    mkdir $BUNDLE/Contents/Resources/lang
-    cp ${current_dir}/lang/*.qm $BUNDLE/Contents/Resources/lang
-fi
-
-if [ -d "${LANG_DIR}" ]; then
-    echo "Copying extra translations in the bundle..."
-    cp ${current_dir}/lang1/*.qm $BUNDLE/Contents/Resources/lang
-fi
-
-if [ -d "${QET_EXAMPLES_DIR}" ]; then
-    echo "Copying examples in the bundle..."
-    mkdir $BUNDLE/Contents/Resources/examples
-    cp ${current_dir}/examples/*.qet $BUNDLE/Contents/Resources/examples
-fi
-
-if [ -d "${QET_FONTS_DIR}" ]; then
-    echo "Copying fonts in the bundle..."
-    mkdir $BUNDLE/Contents/Resources/fonts
-    cp ${current_dir}/fonts/*.ttf $BUNDLE/Contents/Resources/fonts
-fi
-
-if [ -d "${QET_LICENSES_DIR}" ]; then
-    echo "Copying licenses in the bundle..."
-    mkdir $BUNDLE/Contents/Resources/licenses
-    cp -R -L ${QET_LICENSES_DIR} $BUNDLE/Contents/Resources/licenses
-fi
-
-### Sign the bundle #################################################
-# Sign in correct order: all dylibs first (including flat libs copied
-# by macdeployqt from Homebrew), then frameworks, plugins, bundle last.
-
-echo
-echo "______________________________________________________________"
-echo "Code signing (dylibs -> frameworks -> plugins -> bundle):"
-
-# 1. Sign all flat .dylib files in Frameworks/
-echo "-- Signing dylibs in Frameworks/..."
-find "$BUNDLE/Contents/Frameworks" -name "*.dylib" | while read lib; do
-    echo "  $(basename $lib)"
-    codesign --force --sign "$IDENTITY" --timestamp --options=runtime "$lib"
-done
-
-# 2. Sign .framework bundles
-echo "-- Signing .framework bundles..."
-find "$BUNDLE/Contents/Frameworks" -maxdepth 1 -name "*.framework" | while read fw; do
-    echo "  $(basename $fw)"
-    codesign --force --sign "$IDENTITY" --timestamp --options=runtime "$fw"
-done
-
-# 3. Sign plugins
-echo "-- Signing plugins..."
-find "$BUNDLE/Contents/PlugIns" \( -name "*.dylib" -o -name "*.so" \) | while read lib; do
-    echo "  $(basename $lib)"
-    codesign --force --sign "$IDENTITY" --timestamp --options=runtime "$lib"
-done
-
-# 4. Sign any dylibs in MacOS/
-echo "-- Signing dylibs in MacOS/..."
-find "$BUNDLE/Contents/MacOS" -name "*.dylib" | while read lib; do
-    echo "  $(basename $lib)"
-    codesign --force --sign "$IDENTITY" --timestamp --options=runtime "$lib"
-done
-
-# 5. Sign the main executable explicitly
-echo "-- Signing main executable..."
-codesign --force --sign "$IDENTITY" --timestamp --options=runtime \
-    "$BUNDLE/Contents/MacOS/$APPNAME"
-
-# 6. Sign the bundle itself last
-echo "-- Signing bundle..."
-codesign --force --sign "$IDENTITY" --timestamp --options=runtime "$BUNDLE"
-
-# 7. Verify
-echo
-echo "Verifying bundle signature..."
-codesign --verify --deep --strict --verbose=2 "$BUNDLE"
-if [ $? -ne 0 ]; then
-    echo "ERROR: bundle signature verification failed, aborting."
-    exit 1
-fi
-spctl -a -vv "$BUNDLE"
-echo "Bundle signature OK."
-
-### Notarize the .app (via temporary ZIP) ###########################
-
-echo
-echo "______________________________________________________________"
-echo "Create temporary ZIP for notarization:"
-
-NOTARIZE_ZIP="/tmp/${APPNAME}-$VERSION-r$HEAD-arm64-notarize.zip"
-/usr/bin/ditto -c -k --keepParent "$BUNDLE" "$NOTARIZE_ZIP"
-
-echo -e "\033[1;31mWould you like to notarize the .app \"${APPNAME}-${VERSION}-r${HEAD}\", n/Y?\033[m"
-read a
-if [[ $a == "Y" || $a == "y" ]]; then
-    echo
-    echo "______________________________________________________________"
-    echo "Notarizing .app:"
-    xcrun notarytool submit "$NOTARIZE_ZIP" --keychain-profile "org.qelectrotech" --wait
-    if [ $? -ne 0 ]; then
-        echo "ERROR: notarization failed. Check the log with:"
-        echo "  xcrun notarytool log <submission-id> --keychain-profile org.qelectrotech"
-        rm -f "$NOTARIZE_ZIP"
-        exit 1
-    fi
-else
-    echo -e "\033[1;33mExit.\033[m"
-fi
-
-echo "Cleaning up temporary notarization ZIP..."
-rm -f "$NOTARIZE_ZIP"
-
-### Staple the .app #################################################
-
-echo -e "\033[1;31mWould you like to staple the .app \"${APPNAME}-${VERSION}-r${HEAD}\", n/Y?\033[m"
-read a
-if [[ $a == "Y" || $a == "y" ]]; then
-    xcrun stapler staple -v "$BUNDLE"
-    if [ $? -ne 0 ]; then
-        echo "ERROR: stapling .app failed."
-        exit 1
-    fi
-    echo "Verifying staple on .app..."
-    xcrun stapler validate -v "$BUNDLE"
-    spctl -a -vv "$BUNDLE"
-    echo ".app stapled OK."
-else
-    echo -e "\033[1;33mExit.\033[m"
-fi
-
-### Create staging folder with Applications symlink #################
-# The staging folder contains the .app and a symlink to /Applications
-# so the user can drag-and-drop to install directly from the DMG.
-
-echo
-echo "______________________________________________________________"
-echo "Preparing DMG staging folder:"
-
-rm -rf "$STAGING"
-mkdir -p "$STAGING"
-cp -R "$BUNDLE" "$STAGING/"
-ln -s /Applications "$STAGING/Applications"
-echo "Staging folder ready: $STAGING"
-
-### Create writable DMG (UDRW) ######################################
-# We use a writable DMG first so we can re-sign the .app inside
-# after hdiutil copies it (hdiutil can invalidate Sealed Resources
-# during the copy, so we must re-sign inside the mounted volume).
-
-echo
-echo "______________________________________________________________"
-echo "Create writable DMG (UDRW) and re-sign .app inside:"
-
-rm -f "$RW_DMG"
-hdiutil create \
-    -volname "QElectroTech $VERSION" \
-    -srcfolder "$STAGING" \
-    -ov \
-    -format UDRW \
-    -fs HFS+ \
-    "$RW_DMG"
-
-if [ $? -ne 0 ]; then
-    echo "ERROR: hdiutil failed to create writable DMG."
-    rm -rf "$STAGING"
-    exit 1
-fi
-
-# Mount the writable DMG
-rm -rf "$MOUNT_POINT"
-mkdir -p "$MOUNT_POINT"
-hdiutil attach "$RW_DMG" -mountpoint "$MOUNT_POINT" -nobrowse -noverify
-
-if [ $? -ne 0 ]; then
-    echo "ERROR: failed to mount writable DMG."
-    rm -f "$RW_DMG"
-    rm -rf "$STAGING"
-    exit 1
-fi
-
-# Re-sign all binaries inside the mounted DMG
-echo "-- Re-signing dylibs inside DMG..."
-find "$MOUNT_POINT/$BUNDLE/Contents/Frameworks" -name "*.dylib" | while read lib; do
-    codesign --force --sign "$IDENTITY" --timestamp --options=runtime "$lib"
-done
-
-find "$MOUNT_POINT/$BUNDLE/Contents/Frameworks" -maxdepth 1 -name "*.framework" | while read fw; do
-    codesign --force --sign "$IDENTITY" --timestamp --options=runtime "$fw"
-done
-
-find "$MOUNT_POINT/$BUNDLE/Contents/PlugIns" \( -name "*.dylib" -o -name "*.so" \) | while read lib; do
-    codesign --force --sign "$IDENTITY" --timestamp --options=runtime "$lib"
-done
-
-echo "-- Re-signing main executable inside DMG..."
-codesign --force --sign "$IDENTITY" --timestamp --options=runtime \
-    "$MOUNT_POINT/$BUNDLE/Contents/MacOS/$APPNAME"
-
-echo "-- Re-signing bundle inside DMG..."
-codesign --force --sign "$IDENTITY" --timestamp --options=runtime \
-    "$MOUNT_POINT/$BUNDLE"
-
-# Verify signature inside the mounted DMG
-echo "Verifying bundle signature inside DMG..."
-codesign --verify --deep --strict --verbose=2 "$MOUNT_POINT/$BUNDLE"
-if [ $? -ne 0 ]; then
-    echo "ERROR: bundle signature invalid inside DMG, aborting."
-    hdiutil detach "$MOUNT_POINT"
-    rm -f "$RW_DMG"
-    rm -rf "$STAGING" "$MOUNT_POINT"
-    exit 1
-fi
-echo "Bundle signature inside DMG OK."
-
-# Detach the writable DMG
-hdiutil detach "$MOUNT_POINT"
-
-### Convert UDRW to final compressed UDZO ###########################
-
-echo
-echo "______________________________________________________________"
-echo "Convert to final compressed DMG (UDZO):"
-
-mkdir -p "build-aux/mac-osx"
-rm -f "$DMG_PATH"
-
-hdiutil convert "$RW_DMG" \
-    -format UDZO \
-    -o "$DMG_PATH"
-
-if [ $? -ne 0 ]; then
-    echo "ERROR: hdiutil convert failed."
-    rm -f "$RW_DMG"
-    rm -rf "$STAGING" "$MOUNT_POINT"
-    exit 1
-fi
-
-rm -f "$RW_DMG"
-rm -rf "$STAGING" "$MOUNT_POINT"
-
-### Sign the final DMG ##############################################
-
-echo "Signing final DMG..."
-codesign --sign "$IDENTITY" --timestamp "$DMG_PATH"
-
-### Notarize and staple the final DMG ###############################
-
-echo -e "\033[1;31mWould you like to notarize the DMG \"${DMG_NAME}\", n/Y?\033[m"
-read a
-if [[ $a == "Y" || $a == "y" ]]; then
-    echo
-    echo "______________________________________________________________"
-    echo "Notarizing DMG:"
-    xcrun notarytool submit "$DMG_PATH" --keychain-profile "org.qelectrotech" --wait
-    if [ $? -ne 0 ]; then
-        echo "ERROR: DMG notarization failed. Check the log with:"
-        echo "  xcrun notarytool log <submission-id> --keychain-profile org.qelectrotech"
-        exit 1
-    fi
-
-    echo "Stapling DMG..."
-    xcrun stapler staple "$DMG_PATH"
-    if [ $? -ne 0 ]; then
-        echo "ERROR: stapling DMG failed."
-        exit 1
-    fi
-    echo "DMG notarized and stapled OK."
-
-    echo "Verifying final DMG..."
-    spctl -a -vv "$DMG_PATH"
-else
-    echo -e "\033[1;33mExit.\033[m"
-fi
-
-### Clean up bundle #################################################
-
-echo "Cleaning up bundle..."
-rm -rf "$BUNDLE"
-
-### The end #########################################################
-
-echo
-echo "______________________________________________________________"
-echo "The process is done."
-echo "DMG is in the folder 'build-aux/mac-osx'."
-
-### Upload via rsync ################################################
-
-echo -e "\033[1;31mWould you like to upload MacOS package \"${DMG_NAME}\", n/Y?\033[m"
-read a
-if [[ $a == "Y" || $a == "y" ]]; then
-    cp -Rf "$DMG_PATH" /Users/laurent/MAC_OS_X/
-    rsync -e ssh -av --delete-after --no-owner --no-g --chmod=g+w \
-        --progress --exclude='.DS_Store' \
-        /Users/laurent/MAC_OS_X/ \
-        server:download.qelectrotech.org/qet/builds/MAC_OS_X/arm64/
-    if [ $? != 0 ]; then
-        echo "RSYNC ERROR: problem syncing ${DMG_NAME}, retrying..."
-        rsync -e ssh -av --delete-after --no-owner --no-g --chmod=g+w \
-            --progress --exclude='.DS_Store' \
-            /Users/laurent/MAC_OS_X/ \
-            server:download.qelectrotech.org/qet/builds/MAC_OS_X/arm64/
-    fi
-else
-    echo -e "\033[1;33mExit.\033[m"
-fi

misc/MacQetDeploy_arm64_cmake.sh

@@ -126,7 +126,8 @@ ELAPSED_TIME=$(($SECONDS - $START_TIME))
 echo
 echo "The time of compilation is $(($ELAPSED_TIME/60)) min $(($ELAPSED_TIME%60)) sec"
 
-# TODO: confirmer le chemin exact de sortie du .app selon CMakeLists.txt
+# Le .app sort a la racine de $BUILD_DIR : add_executable(... MACOSX_BUNDLE)
+# sans RUNTIME_OUTPUT_DIRECTORY dans CMakeLists.txt.
 echo "Copying built bundle into place..."
 cp -R "$BUILD_DIR/qelectrotech.app" "./$BUNDLE"
 
@@ -147,6 +148,98 @@ fi
 
 macdeployqt $BUNDLE
 
+### fix Homebrew dependencies macdeployqt could not handle ##########
+# Recent Homebrew bottles (brotli, webp, sharpyuv...) reference their own
+# dependencies as @rpath/libX.dylib. macdeployqt only resolves @rpath in
+# Contents/lib and in Qt's lib dir (-libpath does not help): it prints
+# "Cannot resolve rpath" and leaves some references untouched, either
+# absolute /opt/homebrew paths or @rpath libs missing from the bundle.
+# Fix both here: every /opt/homebrew reference is rewritten to
+# @rpath/libX.dylib (install ids too), and every @rpath/libX.dylib is
+# copied into Contents/Frameworks, where the executable's LC_RPATH
+# (@executable_path/../Frameworks) lets dyld find it. Everything is signed
+# below with the rest of Frameworks/.
+echo
+echo "______________________________________________________________"
+echo "Fix Homebrew dependencies left by macdeployqt:"
+
+FW="$BUNDLE/Contents/Frameworks"
+chmod -R u+w "$BUNDLE/Contents/MacOS" "$FW" "$BUNDLE/Contents/PlugIns" 2>/dev/null
+
+# Every Mach-O candidate of the bundle (otool silently ignores the others)
+list_macho() {
+    find "$BUNDLE/Contents/MacOS" "$FW" "$BUNDLE/Contents/PlugIns" -type f \
+        \( -name '*.dylib' -o -perm -u+x \) 2>/dev/null
+}
+
+# Dependencies of one binary, without its own install id (dylibs only)
+list_deps() {
+    _id=$(otool -D "$1" 2>/dev/null | sed -n 2p)
+    otool -L "$1" 2>/dev/null | awk 'NR>1 { print $1 }' | while read _dep; do
+        [ "$_dep" = "$_id" ] || echo "$_dep"
+    done
+}
+
+# The @rpath/libX.dylib names referenced anywhere in the bundle
+list_rpath_libs() {
+    list_macho | while read bin; do
+        list_deps "$bin" | sed -n 's#^@rpath/\([^/]*\.dylib\)$#\1#p'
+    done | LC_ALL=C sort -u
+}
+
+if ! otool -l "$BUNDLE/Contents/MacOS/$APPNAME" | grep -q "@executable_path/../Frameworks" ; then
+    install_name_tool -add_rpath "@executable_path/../Frameworks" "$BUNDLE/Contents/MacOS/$APPNAME"
+    echo "  Added LC_RPATH @executable_path/../Frameworks to $APPNAME"
+fi
+
+# 3 passes, since each copied library can bring its own dependencies:
+#  a. rewrite absolute /opt/homebrew references (install ids included),
+#     copying the referenced library into Frameworks/ if needed
+#  b. copy the @rpath/libX.dylib still missing from Frameworks/
+for PASS in 1 2 3; do
+    list_macho | while read bin; do
+        _id=$(otool -D "$bin" 2>/dev/null | sed -n 2p)
+        case "$_id" in
+            /opt/homebrew/*)
+                install_name_tool -id "@rpath/$(basename "$_id")" "$bin" 2>/dev/null
+                echo "  Fixed id  (pass $PASS): $(basename "$bin")"
+                ;;
+        esac
+        list_deps "$bin" | grep '^/opt/homebrew/' | while read ref; do
+            name=$(basename "$ref")
+            if [ ! -e "$FW/$name" ]; then
+                cp -L "$ref" "$FW/$name" && chmod u+w "$FW/$name"
+                echo "  Copied    (pass $PASS): $name"
+            fi
+            install_name_tool -change "$ref" "@rpath/$name" "$bin" 2>/dev/null
+            echo "  Fixed ref (pass $PASS): $(basename "$bin") -> @rpath/$name"
+        done
+    done
+    list_rpath_libs | while read lib; do
+        if [ ! -e "$FW/$lib" ] && [ -e "/opt/homebrew/lib/$lib" ]; then
+            cp -L "/opt/homebrew/lib/$lib" "$FW/$lib" && chmod u+w "$FW/$lib"
+            echo "  Copied    (pass $PASS): $lib"
+        fi
+    done
+done
+
+# 3. Checks
+UNRESOLVED=$(list_rpath_libs | while read lib; do [ -e "$FW/$lib" ] || echo "$lib"; done)
+if [ -n "$UNRESOLVED" ]; then
+    echo "ERROR: @rpath libraries still missing from Frameworks/:" $UNRESOLVED
+    exit 1
+fi
+HOMEBREW_REFS=$(list_macho | while read bin; do
+    otool -L "$bin" 2>/dev/null | awk 'NR>1 { print $1 }' | grep '^/opt/homebrew/' \
+        | sed "s#^#  $(basename "$bin") -> #"
+done)
+if [ -n "$HOMEBREW_REFS" ]; then
+    echo "ERROR: bundle still references Homebrew paths:"
+    echo "$HOMEBREW_REFS"
+    exit 1
+fi
+echo "All dependencies resolved inside the bundle."
+
 ### install Info.plist and app icon #################################
 # NOTE: this must run AFTER macdeployqt, not before. macdeployqt
 # rewrites/regenerates parts of Contents/Resources, and files copied
@@ -175,7 +268,6 @@ QET_LANG_DIR="${current_dir}/lang/"
 QET_EXAMPLES_DIR="${current_dir}/examples/"
 QET_FONTS_DIR="${current_dir}/fonts/"
 QET_LICENSES_DIR="${current_dir}/licenses/"
-LANG_DIR="${current_dir}/lang1/"
 
 if [ -d "${QET_ELMT_DIR}" ]; then
     cp -R ${QET_ELMT_DIR} $BUNDLE/Contents/Resources/elements
@@ -183,12 +275,85 @@ fi
 if [ -d "${QET_TBT_DIR}" ]; then
     cp -R ${QET_TBT_DIR} $BUNDLE/Contents/Resources/titleblocks
 fi
-if [ -d "${QET_LANG_DIR}" ]; then
-    mkdir $BUNDLE/Contents/Resources/lang
-    cp ${current_dir}/lang/*.qm $BUNDLE/Contents/Resources/lang
+# Traductions : depuis la PR #751, les .qm ne sont plus versionnes ; lrelease
+# les genere dans $BUILD_DIR/lang/. Jeu attendu = les .ts listes dans TS_FILES
+# (cmake/qet_compilation_vars.cmake) : un .qm manquant arrete le script, un
+# .ts present dans lang/ mais absent de TS_FILES donne seulement un WARNING.
+# Fichiers temporaires plutot que <(...) : /bin/sh de macOS (bash 3.2 en mode
+# POSIX) n'a pas la substitution de processus.
+QM_SRC="${current_dir}/${BUILD_DIR}/lang"
+QM_TMP=$(mktemp -d /tmp/qet_qm.XXXXXX)
+grep -o 'lang/qet_[A-Za-z_]*\.ts' "${current_dir}/cmake/qet_compilation_vars.cmake" \
+    | sed -e 's#^lang/##' -e 's#\.ts$##' | LC_ALL=C sort -u > "$QM_TMP/listed"
+if [ ! -s "$QM_TMP/listed" ]; then
+    echo "ERROR: cannot read TS_FILES from cmake/qet_compilation_vars.cmake"
+    rm -rf "$QM_TMP"
+    exit 1
 fi
-if [ -d "${LANG_DIR}" ]; then
-    cp ${current_dir}/lang1/*.qm $BUNDLE/Contents/Resources/lang
+find "${QET_LANG_DIR}" -maxdepth 1 -name 'qet_*.ts' -exec basename {} .ts \; | LC_ALL=C sort > "$QM_TMP/present"
+UNLISTED=$(LC_ALL=C comm -13 "$QM_TMP/listed" "$QM_TMP/present")
+if [ -n "$UNLISTED" ]; then
+    echo "WARNING: .ts files not in TS_FILES, no .qm built:" $UNLISTED
+fi
+mkdir -p $BUNDLE/Contents/Resources/lang
+find "${QM_SRC}" -maxdepth 1 -name 'qet_*.qm' -exec cp {} $BUNDLE/Contents/Resources/lang/ \; 2>/dev/null
+find $BUNDLE/Contents/Resources/lang -maxdepth 1 -name 'qet_*.qm' -exec basename {} .qm \; | LC_ALL=C sort > "$QM_TMP/built"
+MISSING=$(LC_ALL=C comm -23 "$QM_TMP/listed" "$QM_TMP/built")
+echo "$(wc -l < "$QM_TMP/built" | tr -d ' ') .qm files copied to Contents/Resources/lang (expected: $(wc -l < "$QM_TMP/listed" | tr -d ' '))"
+
+# Traductions de Qt lui-meme (boutons OK/Annuler, dialogues standard...) :
+# elles viennent de qtbase_XX.qm, pas des .ts de QET, et macdeployqt ne les
+# deploie pas. QETApp::setLanguage() charge "qt_XX" depuis le chemin de
+# traductions de Qt (absent du bundle), puis depuis le dossier lang/ de QET :
+# on y depose donc chaque qtbase_XX.qm sous le nom qt_XX.qm. qtbase_XX.qm est
+# autonome, contrairement aux qt_XX.qm de Qt qui dependent de tous les modules.
+# Premier dossier contenant des qtbase_*.qm : celui annonce par qtpaths, puis
+# la formule Homebrew separee qttranslations, puis les autres emplacements
+# Homebrew possibles. Homebrew fait de ces dossiers des liens symboliques
+# (-> Cellar/qttranslations/...) : find doit donc les suivre (-L), sinon il
+# ne voit que le lien lui-meme et ne trouve aucun fichier dedans.
+QT_TR_DIR=""
+for d in "$("$QT_PREFIX/bin/qtpaths" --query QT_INSTALL_TRANSLATIONS 2>/dev/null)" \
+         "$(brew --prefix qttranslations 2>/dev/null)/share/qt/translations" \
+         "$QT_PREFIX/share/qt/translations" \
+         /opt/homebrew/share/qt/translations \
+         /opt/homebrew/opt/*/share/qt/translations ; do
+    if ls "$d"/qtbase_*.qm >/dev/null 2>&1 ; then
+        QT_TR_DIR="$d"
+        break
+    fi
+done
+LANG_DST="$BUNDLE/Contents/Resources/lang"
+find -L "$QT_TR_DIR" -maxdepth 1 -name 'qtbase_*.qm' 2>/dev/null | while read f; do
+    l=$(basename "$f" .qm | sed 's/^qtbase_//')
+    cp "$f" "$LANG_DST/qt_$l.qm"
+done
+# Langues QET sans equivalent Qt exact (pt -> pt_PT, zh -> zh_CN...) :
+# QTranslator ne sait que raccourcir le code (fr_FR -> fr), pas l'allonger.
+# On prefere la variante "principale" (pt_PT), sinon la premiere trouvee.
+sed 's/^qet_//' "$QM_TMP/listed" | while read l; do
+    if [ ! -e "$LANG_DST/qt_$l.qm" ]; then
+        main="$QT_TR_DIR/qtbase_${l}_$(echo "$l" | tr 'a-z' 'A-Z').qm"
+        if [ -e "$main" ]; then
+            alt="$main"
+        else
+            alt=$(find -L "$QT_TR_DIR" -maxdepth 1 -name "qtbase_${l}_*.qm" 2>/dev/null | LC_ALL=C sort | head -1)
+        fi
+        [ -n "$alt" ] && cp "$alt" "$LANG_DST/qt_$l.qm"
+    fi
+done
+QT_QM_COUNT=$(find "$LANG_DST" -maxdepth 1 -name 'qt_*.qm' | wc -l | tr -d ' ')
+echo "${QT_QM_COUNT} Qt translation files (qt_*.qm) copied from ${QT_TR_DIR:-<not found>}"
+if [ "${QT_QM_COUNT}" -eq 0 ]; then
+    echo "ERROR: no qtbase_*.qm found (Qt translations not installed?)."
+    echo "       Check with: find /opt/homebrew -name 'qtbase_fr.qm'"
+    rm -rf "$QM_TMP"
+    exit 1
+fi
+rm -rf "$QM_TMP"
+if [ -n "$MISSING" ]; then
+    echo "ERROR: missing translations:" $MISSING
+    exit 1
 fi
 if [ -d "${QET_EXAMPLES_DIR}" ]; then
     mkdir $BUNDLE/Contents/Resources/examples

qelectrotech.pro

@@ -1,381 +0,0 @@
-######################################################################
-#                   Fichier projet de QElectroTech                   #
-######################################################################
-
-# Chemins utilises pour la compilation et l'installation de QET
-unix {
-        # Chemins UNIX
-        COMPIL_PREFIX              = '/usr/local/'
-        INSTALL_PREFIX             = '/usr/local/'
-        QET_BINARY_PATH            = 'bin/'
-        QET_COMMON_COLLECTION_PATH = 'share/qelectrotech/elements/'
-        QET_COMMON_TBT_PATH        = 'share/qelectrotech/titleblocks/'
-        QET_LANG_PATH              = 'share/qelectrotech/lang/'
-        QET_EXAMPLES_PATH          = 'share/qelectrotech/examples/'
-        QET_LICENSE_PATH           = 'doc/qelectrotech/'
-        QET_MIME_PACKAGE_PATH      = '../share/mime/packages/'
-        QET_DESKTOP_PATH           = 'share/applications/'
-        QET_ICONS_PATH             = 'share/icons/hicolor/'
-        QET_MAN_PATH               = 'man/'
-        QET_APPDATA_PATH           = 'share/appdata'
-}
-win32 {
-        # Chemins Windows
-        COMPIL_PREFIX              = './'
-        INSTALL_PREFIX             = './'
-        QET_BINARY_PATH            = './'
-        QET_COMMON_COLLECTION_PATH = 'elements/'
-        QET_COMMON_TBT_PATH        = 'titleblocks/'
-        QET_LANG_PATH              = 'lang/'
-        QET_LICENSE_PATH           = './'
-        # Liste des ressources Windows
-    #RC_FILE = qelectrotech.rc
-}
-macx {
-        # Chemins MacOS X
-        COMPIL_PREFIX              = './'
-        INSTALL_PREFIX             = '/usr/local/'
-        QET_BINARY_PATH            = 'bin/'
-        QET_COMMON_COLLECTION_PATH = '../Resources/elements/'
-        QET_COMMON_TBT_PATH        = '../Resources/titleblocks/'
-        QET_LANG_PATH              = '../Resources/lang/'
-        QET_EXAMPLES_PATH          = 'share/qelectrotech/examples/'
-        QET_LICENSE_PATH           = 'doc/qelectrotech/'
-        QET_DESKTOP_PATH           = 'share/applications/'
-        QET_ICONS_PATH             = 'share/icons/hicolor/'
-        QET_MAN_PATH               = 'man/'
-        ICON                       = 'ico/mac_icon/qelectrotech.icns'
-
-}
-
-# Commenter la ligne ci-dessous pour desactiver l'option --common-elements-dir
-DEFINES += QET_ALLOW_OVERRIDE_CED_OPTION
-
-# Comment the line below to disable the --common-tbt-dir option
-DEFINES += QET_ALLOW_OVERRIDE_CTBTD_OPTION
-
-# Commenter la ligne ci-dessous pour desactiver l'option --config-dir
-DEFINES += QET_ALLOW_OVERRIDE_CD_OPTION
-
-# Commenter la ligne ci-dessous pour desactiver l'option --data-dir
-DEFINES += QET_ALLOW_OVERRIDE_DD_OPTION
-
-#comment the line below to disable the project database export
-DEFINES += QET_EXPORT_PROJECT_DB
-
-# warn on *any* usage of deprecated APIs
-#DEFINES += QT_DEPRECATED_WARNINGS
-
-
-######################################################################
-
-include(sources/PropertiesEditor/PropertiesEditor.pri)
-include(sources/QetGraphicsItemModeler/QetGraphicsItemModeler.pri)
-include(sources/QPropertyUndoCommand/QPropertyUndoCommand.pri)
-include(SingleApplication/singleapplication.pri)
-include(sources/QWidgetAnimation/QWidgetAnimation.pri)
-
-DEFINES += QAPPLICATION_CLASS=QApplication
-DEFINES += QT_MESSAGELOGCONTEXT
-DEFINES += GIT_COMMIT_SHA="\\\"$(shell git -C \""$$_PRO_FILE_PWD_"\" rev-parse --verify HEAD 2>/dev/null || true)\\\""
-
-# You can make your code fail to compile if it uses deprecated APIs.
-# In order to do so, uncomment the following line.
-#DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0x060000 # disables all the APIs deprecated before Qt 6.0.0
-
-# You can make your code warn on compile time for the TODO's
-# In order to do so, uncomment the following line.
-#DEFINES += TODO_LIST
-
-TEMPLATE = app
-
-#ToDo comment close the gap with Cmake
-#this is my next problem now
-INCLUDEPATH += sources/ui
-
-#comment close the gap with Cmake (De-Backer)
-#DEPENDPATH += .
-#INCLUDEPATH += sources \
-#               sources/titleblock \
-#               sources/ui \
-#               sources/qetgraphicsitem \
-#               sources/qetgraphicsitem/ViewItem \
-#               sources/qetgraphicsitem/ViewItem/ui \
-#               sources/richtext \
-#               sources/factory \
-#               sources/properties \
-#               sources/dvevent \
-#               sources/editor \
-#               sources/editor/esevent \
-#               sources/editor/graphicspart \
-#               sources/editor/ui \
-#               sources/editor/UndoCommand \
-#               sources/undocommand \
-#               sources/diagramevent \
-#               sources/ElementsCollection \
-#               sources/ElementsCollection/ui \
-#               sources/autoNum \
-#               sources/autoNum/ui \
-#               sources/ui/configpage \
-#               sources/SearchAndReplace \
-#               sources/SearchAndReplace/ui \
-#               sources/NameList \
-#               sources/NameList/ui \
-#               sources/utils \
-#               pugixml \
-#               sources/dataBase \
-#               sources/dataBase/ui \
-#               sources/factory/ui \
-#               sources/print
-
-# Fichiers sources
-HEADERS += $$files(sources/*.h) \
-           $$files(sources/project/*.h) \
-           $$files(sources/ui/*.h) \
-           $$files(sources/editor/*.h) \
-           $$files(sources/titleblock/*.h) \
-           $$files(sources/richtext/*.h) \
-           $$files(sources/qetgraphicsitem/*.h) \
-           $$files(sources/qetgraphicsitem/ViewItem/*.h) \
-           $$files(sources/qetgraphicsitem/ViewItem/ui/*.h) \
-           $$files(sources/factory/*.h) \
-           $$files(sources/properties/*.h) \
-           $$files(sources/editor/ui/*.h) \
-           $$files(sources/editor/esevent/*.h) \
-           $$files(sources/editor/graphicspart/*.h) \
-           $$files(sources/editor/UndoCommand/*h) \
-           $$files(sources/dvevent/*.h) \
-           $$files(sources/undocommand/*.h) \
-           $$files(sources/diagramevent/*.h) \
-           $$files(sources/ElementsCollection/*.h) \
-           $$files(sources/ElementsCollection/ui/*.h) \
-           $$files(sources/autoNum/*.h) \
-           $$files(sources/autoNum/ui/*.h) \
-           $$files(sources/ui/configpage/*.h) \
-           $$files(sources/SearchAndReplace/*.h) \
-           $$files(sources/SearchAndReplace/ui/*.h) \
-           $$files(sources/NameList/*.h) \
-           $$files(sources/NameList/ui/*.h) \
-           $$files(sources/utils/*.h) \
-           $$files(pugixml/src/*.hpp) \
-           $$files(sources/dataBase/*.h) \
-           $$files(sources/dataBase/ui/*.h) \
-           $$files(sources/factory/ui/*.h) \
-           $$files(sources/print/*.h) \
-           $$files(sources/TerminalStrip/*.h) \
-           $$files(sources/TerminalStrip/ui/*.h) \
-           $$files(sources/TerminalStrip/ui/ConfigPage/*h) \
-           $$files(sources/TerminalStrip/UndoCommand/*.h) \
-           $$files(sources/TerminalStrip/GraphicsItem/*.h) \
-           $$files(sources/TerminalStrip/GraphicsItem/properties/*.h) \
-           $$files(sources/xml/*.h) \
-           $$files(sources/dxf/*.h) \
-           $$files(sources/qet_elementscaler/*.h) \
-           $$files(sources/svg/*.h) \
-           $$files(sources/import/edz/*.h) \
-           $$files(sources/import/edz/lzma/*.h) \
-           $$files(sources/logging/*.h) \
-           $$files(sources/logging/ui/*.h)
-
-SOURCES += $$files(sources/*.cpp) \
-           $$files(sources/editor/*.cpp) \
-           $$files(sources/project/*.cpp) \
-           $$files(sources/titleblock/*.cpp) \
-           $$files(sources/richtext/*.cpp) \
-           $$files(sources/ui/*.cpp) \
-           $$files(sources/qetgraphicsitem/*.cpp) \
-           $$files(sources/qetgraphicsitem/ViewItem/*.cpp) \
-           $$files(sources/qetgraphicsitem/ViewItem/ui/*.cpp) \
-           $$files(sources/factory/*.cpp) \
-           $$files(sources/properties/*.cpp) \
-           $$files(sources/editor/ui/*.cpp) \
-           $$files(sources/editor/esevent/*.cpp) \
-           $$files(sources/editor/graphicspart/*.cpp) \
-           $$files(sources/editor/UndoCommand/*cpp) \
-           $$files(sources/dvevent/*.cpp) \
-           $$files(sources/undocommand/*.cpp) \
-           $$files(sources/diagramevent/*.cpp) \
-           $$files(sources/ElementsCollection/*.cpp) \
-           $$files(sources/ElementsCollection/ui/*.cpp) \
-           $$files(sources/autoNum/*.cpp) \
-           $$files(sources/autoNum/ui/*.cpp) \
-           $$files(sources/ui/configpage/*.cpp) \
-           $$files(sources/SearchAndReplace/*.cpp) \
-           $$files(sources/SearchAndReplace/ui/*.cpp) \
-           $$files(sources/NameList/*.cpp) \
-           $$files(sources/NameList/ui/*.cpp) \
-           $$files(sources/utils/*.cpp) \
-           $$files(pugixml/src/*.cpp) \
-           $$files(sources/dataBase/*.cpp) \
-           $$files(sources/dataBase/ui/*.cpp) \
-           $$files(sources/factory/ui/*.cpp) \
-           $$files(sources/print/*.cpp) \
-           $$files(sources/TerminalStrip/*.cpp) \
-           $$files(sources/TerminalStrip/ui/*.cpp) \
-           $$files(sources/TerminalStrip/ui/ConfigPage/*cpp) \
-           $$files(sources/TerminalStrip/UndoCommand/*.cpp) \
-           $$files(sources/TerminalStrip/GraphicsItem/*.cpp) \
-           $$files(sources/TerminalStrip/GraphicsItem/properties/*.cpp) \
-           $$files(sources/xml/*.cpp) \
-           $$files(sources/dxf/*.cpp) \
-           $$files(sources/qet_elementscaler/*.cpp) \
-           $$files(sources/svg/*.cpp) \
-           $$files(sources/import/edz/*.cpp) \
-           $$files(sources/import/edz/lzma/*.c) \
-           $$files(sources/logging/*.cpp) \
-           $$files(sources/logging/ui/*.cpp)
-
-
-# Needed for use promote QTreeWidget in terminalstripeditor.ui
-INCLUDEPATH += sources/TerminalStrip/ui
-
-# Needed for the EPLAN .edz importer (PR #513) and its bundled lzma/7z sources
-INCLUDEPATH += sources/import/edz
-INCLUDEPATH += sources/import/edz/lzma
-
-# Liste des fichiers qui seront incorpores au binaire en tant que ressources Qt
-RESOURCES += qelectrotech.qrc
-
-# Liste des ressources Windows
-#RC_FILE = ico/windows_icon/qelectrotech.rc
-
-# Fichiers de traduction qui seront installes
-TRANSLATIONS += lang/*.ts
-
-# Modules Qt utilises par l'application
-QT += xml svg network sql widgets printsupport concurrent gui-private
-
-# KDE Frameworks 5 (KWidgetsAddons, KCoreAddons) are optional.
-#
-# Pass CONFIG+=no_kf5 to qmake to build against the Qt-only replacements in
-# sources/ui/nokde instead. This mirrors the CMake option BUILD_WITH_KF5=OFF
-# and is the easiest route on Windows/MinGW, where KF5 is awkward to obtain.
-#
-#     qmake CONFIG+=no_kf5 qelectrotech.pro
-#
-# sources/ui/nokde is only added to the include path in that configuration, so
-# a normal KF5 build is unaffected.
-no_kf5 {
-    DEFINES     += BUILD_WITHOUT_KF5
-    INCLUDEPATH += sources/ui/nokde
-    HEADERS     += $$files(sources/ui/nokde/*.h)
-    SOURCES     += $$files(sources/ui/nokde/*.cpp)
-} else {
-    QT += KWidgetsAddons KCoreAddons
-}
-
-# Private Qt GUI headers (needed for QPdfEngine::drawHyperlink)
-# gui-private should add this automatically, but some distros need it explicit
-INCLUDEPATH += $$[QT_INSTALL_HEADERS]/QtGui/$$[QT_VERSION]/QtGui
-
-# UI DESIGNER FILES AND GENERATION SOURCES FILES
-FORMS += $$files(sources/richtext/*.ui) \
-         $$files(sources/ui/*.ui) \
-         $$files(sources/editor/ui/*.ui) \
-         $$files(sources/ElementsCollection/ui/*.ui) \
-         $$files(sources/autoNum/ui/*.ui) \
-         $$files(sources/ui/configpage/*.ui) \
-         $$files(sources/SearchAndReplace/ui/*.ui) \
-         $$files(sources/NameList/ui/*.ui) \
-         $$files(sources/qetgraphicsitem/ViewItem/ui/*.ui) \
-         $$files(sources/dataBase/ui/*.ui) \
-         $$files(sources/factory/ui/*.ui) \
-         $$files(sources/print/*.ui) \
-         $$files(sources/TerminalStrip/ui/*.ui) \
-         $$files(sources/TerminalStrip/ui/ConfigPage/*.ui)
-
-UI_SOURCES_DIR = sources/ui/
-UI_HEADERS_DIR = sources/ui/
-
-# Configuration de la compilation
-CONFIG += c++17 debug_and_release warn_on link_pkgconfig
-
-# Nom du binaire genere par la compilation
-TARGET = qelectrotech
-
-# Ajustement des bibliotheques utilisees lors de l'edition des liens
-unix:QMAKE_LIBS_THREAD -= -lpthread
-unix|win32: PKGCONFIG += sqlite3
-
-# Enable C++17
-QMAKE_CXXFLAGS += -std=c++17
-
-# Description de l'installation
-target.path        = $$join(INSTALL_PREFIX,,,$${QET_BINARY_PATH})
-
-elements.path      = $$join(INSTALL_PREFIX,,,$${QET_COMMON_COLLECTION_PATH})
-elements.files     = elements/*
-
-tbt.path           = $$join(INSTALL_PREFIX,,,$${QET_COMMON_TBT_PATH})
-tbt.files          = titleblocks/*
-
-lang.path          = $$join(INSTALL_PREFIX,,,$${QET_LANG_PATH})
-lang.files         = $$replace(TRANSLATIONS, '.ts', '.qm')
-
-examples.path      = $$join(INSTALL_PREFIX,,,$${QET_EXAMPLES_PATH})
-examples.files     = examples/*
-
-copyright.path     = $$join(INSTALL_PREFIX,,,$${QET_LICENSE_PATH})
-copyright.files    = LICENSE ELEMENTS.LICENSE CREDIT README ChangeLog
-
-mime_package.path  = $$join(INSTALL_PREFIX,,,$${QET_MIME_PACKAGE_PATH})
-mime_package.files = misc/qelectrotech.xml
-
-desktop.path       = $$join(INSTALL_PREFIX,,,$${QET_DESKTOP_PATH})
-desktop.files      = misc/org.qelectrotech.qelectrotech.desktop
-
-appdata.path       = $$join(INSTALL_PREFIX,,,$${QET_APPDATA_PATH})
-appdata.files      = misc/qelectrotech.appdata.xml
-
-icons.path         = $$join(INSTALL_PREFIX,,,$${QET_ICONS_PATH})
-icons.files        = ico/breeze-icons/16x16   \
-                     ico/breeze-icons/22x22   \
-                     ico/breeze-icons/32x32   \
-                     ico/breeze-icons/48x48   \
-                     ico/breeze-icons/64x64   \
-                     ico/breeze-icons/128x128 \
-                     ico/breeze-icons/256x256
-
-man.path           = $$join(INSTALL_PREFIX,,,$${QET_MAN_PATH})
-man.files          = man/files/*
-man.extra          = sh man/compress_man_pages.sh
-
-# L'installation comprend la copie du binaire, des elements, des fichiers de langue et du fichier LICENSE
-INSTALLS += target elements tbt lang copyright
-# Sous Unix, on installe egalement l'icone, un fichier .desktop, des fichiers mime et les pages de manuel
-unix {
-        INSTALLS += desktop mime_package icons man examples appdata
-}
-
-# Options de compilation communes a Unix et MacOS X
-unix {
-        # Chemin des fichiers de traduction ; par defaut : lang/ dans le repertoire d'execution
-        DEFINES += QET_LANG_PATH=$$join(COMPIL_PREFIX,,,$${QET_LANG_PATH})
-
-        # Chemin de la collection commune ; par defaut : elements/ dans le repertoire d'execution
-        DEFINES += QET_COMMON_COLLECTION_PATH=$$join(COMPIL_PREFIX,,,$${QET_COMMON_COLLECTION_PATH})
-
-        DEFINES += QET_COMMON_TBT_PATH=$$join(COMPIL_PREFIX,,,$${QET_COMMON_TBT_PATH})
-}
-
-# Options de compilation specifiques a MacOS X
-macx {
-        # les chemins definis precedemment sont relatifs au dossier contenant le binaire executable
-        DEFINES += QET_LANG_PATH_RELATIVE_TO_BINARY_PATH
-        DEFINES += QET_COMMON_COLLECTION_PATH_RELATIVE_TO_BINARY_PATH
-        
-
-        equals(QMAKE_TARGET.arch, x86) {
-        message( "It's x86" )
-        LIBS +=   /opt/digikam.org.x86_64/lib/libsqlite3.0.dylib
-        } 
-        equals(QMAKE_TARGET.arch, arm64) {
-        message( "It's arm64" )
-        LIBS +=   /opt/digikam.org.arm64/lib/libsqlite3.0.dylib
-        }
-      }
-
-# Compilers-specific options
-unix {
-        QMAKE_COPY_DIR = 'cp -f -r --preserve=timestamps'
-}

sources/TerminalStrip/ui/terminalstriplayouteditor.cpp

@@ -29,6 +29,9 @@ TerminalStripLayoutEditor::TerminalStripLayoutEditor(QSharedPointer<TerminalStri
 {
 	ui->setupUi(this);
 	ui->m_graphics_view->setScene(new QGraphicsScene{ this });
+	// The preview is printed output: black ink on a white page, whatever
+	// the application palette.
+	ui->m_graphics_view->setBackgroundBrush(Qt::white);
 	ui->m_graphics_view->scene()->addItem(&m_preview_strip_item);
 	updateUi();
 }

sources/autoNum/assignvariables.cpp

@@ -24,6 +24,8 @@
 #include "../qetgraphicsitem/element.h"
 #include "../qetxml.h"
 #include "../qetproject.h"
+#include <QDir>
+#include <QDomDocument>
 #include <QStringList>
 #include <QVariant>
 #include <utility>
@@ -703,6 +705,74 @@ namespace autonum
 		return formula;
 	}
 
+	/**
+		@brief prefixFromLabelFile
+		Look up a prefix for @a path (path[dirLevel] outermost, path[1] the
+		deepest directory; path[0], the element's own file name, is never
+		matched) in the qet_labels.xml at @a filepath.
+
+		Descends through nested \<category name="..."\> elements matching
+		path[dirLevel], path[dirLevel-1], ..., path[1] in turn, considering
+		only *direct* children at each step -- unlike a flat token scan,
+		this cannot be fooled by a same-named category living elsewhere in
+		the document at the wrong nesting depth (bugtracker #671 item 5).
+
+		At each matched level, that category's own \<prefix\> child -- even
+		an empty one -- overrides whatever a shallower ancestor already
+		provided, so an explicit empty \<prefix/\> cancels inheritance
+		rather than silently falling back to it (the behaviour requested in
+		PR #686 review). A category with no \<prefix\> child at all leaves
+		the inherited value untouched, which is how a directory with no
+		prefix of its own comes to inherit its parent's, as the file's own
+		header comment documents.
+
+		@return the prefix that applies, or a null QString if the file
+			cannot be read, is not well-formed, or does not describe this
+			path at all (as opposed to describing it with no prefix
+			anywhere along it, which is a non-null empty string).
+	*/
+	static QString prefixFromLabelFile(const QString &filepath, const QStringList &path, int dirLevel)
+	{
+		QFile file(filepath);
+		if (!file.open(QFile::ReadOnly | QFile::Text))
+			return QString();
+
+		QDomDocument document;
+		if (!document.setContent(&file))
+			return QString();
+
+		QDomElement node = document.documentElement();
+		if (node.isNull())
+			return QString();
+
+		QString prefix;
+		for (int i = dirLevel ; i >= 1 ; --i) {
+			QDomElement child = node.firstChildElement(QStringLiteral("category"));
+			while (!child.isNull()
+				   && child.attribute(QStringLiteral("name")) != path[i]) {
+				child = child.nextSiblingElement(QStringLiteral("category"));
+			}
+			if (child.isNull())
+				return QString();
+			node = child;
+
+			const QDomElement own = node.firstChildElement(QStringLiteral("prefix"));
+			if (!own.isNull()) {
+					//readElementText()'s null-vs-empty distinction that PR
+					//#686 needed for the old QXmlStreamReader-based lookup
+					//has a QDomElement equivalent: text() on an empty
+					//element can itself come back null depending on how the
+					//XML was written, so the same explicit fallback applies
+					//-- an empty QString here means "found, deliberately
+					//blank", not "not found".
+				prefix = own.text();
+				if (prefix.isNull())
+					prefix = QString("");
+			}
+		}
+		return prefix;
+	}
+
 	/**
 		@brief elementPrefixForLocation
 		@param location
@@ -716,114 +786,85 @@ namespace autonum
 		if (!location.isProject())
 			return QString();
 
-		QXmlStreamReader rxml;
-		QString path[10];
-		int i = -1;
+			//Directory names from the element up to (not including) the
+			//collection root, outermost last -- path[dirLevel] is the
+			//top-level category, path[1] the element's immediate parent
+			//directory, path[0] the element's own file name (never matched
+			//against a category: the search stops descending once it has
+			//matched path[1], the deepest real directory). An unbounded
+			//QStringList rather than a fixed-size array, because a custom
+			//collection can nest deeper than the shipped one -- see
+			//bugtracker #671 item 3.
+		QStringList path;
 		ElementsLocation current_location = location;
-		int dirLevel = -1;
-
-			//Add location name to path array
-		while((current_location.parent() != current_location) && (current_location.parent().fileName() != "import"))
+		while ((current_location.parent() != current_location)
+			   && (current_location.parent().fileName() != "import"))
 		{
-			i++;
-			path[i]=current_location.fileName();
+			path << current_location.fileName();
 			current_location = current_location.parent();
-			dirLevel++;
 		}
-			//User Element without folder treatment
-		if (i == -1)
-		{
-			i = 0;
-			path[i]=current_location.fileName();
+			//User element without folder treatment
+		if (path.isEmpty()) {
+			path << current_location.fileName();
 			current_location = current_location.parent();
-			dirLevel = 0;
+		}
+		const int dirLevel = path.size() - 1;
+			//Name of the top-level tree the element's path was found
+			//under, e.g. "10_electric" -- or, for a custom/company
+			//collection not organised that way, whatever its top-level
+			//folder happens to be called.
+		const QString collection_root = current_location.fileName();
+
+			//Every top-level common-collection tree (10_electric,
+			//20_logic, 30_hydraulic, ...) may carry its own
+			//qet_labels.xml, with categories relative to that tree, the
+			//same way 10_electric/qet_labels.xml already does -- not just
+			//10_electric, which is all the hardcoded check this replaces
+			//used to allow (bugtracker #671 item 2). commonElementsDir()
+			//-- unlike customElementsDir(), which normalises this itself
+			//-- returns whatever path the user configured verbatim, with
+			//no guaranteed trailing separator; concatenating a suffix onto
+			//it directly used to silently mangle the path (and so the
+			//prefix lookup) for any install relocated to a directory
+			//without a trailing slash (#671 item 1). QDir::filePath()
+			//joins correctly either way.
+		{
+			const QString common_file = QDir(QETApp::commonElementsDir())
+					.filePath(collection_root + QStringLiteral("/qet_labels.xml"));
+			const QString prefix = prefixFromLabelFile(common_file, path, dirLevel);
+			if (!prefix.isNull()) {
+				return prefix;
+			}
 		}
 
-		// Create Custom labels if qet_labels.xml exits in customElementsDir
-		if (current_location.fileName() != "10_electric"){
-		QString custom_labels = "qet_labels.xml";
-		QString customfilepath = QETApp::customElementsDir().append(custom_labels);
-		
-		QFile file(customfilepath);
-		file.isReadable();
-		if (!file.open(QFile::ReadOnly | QFile::Text))
-			return QString();
-				rxml.setDevice(&file);
-				rxml.readNext();
+			/* Which collection an element actually came from is not
+			 * recoverable post-import (addElement() strips the protocol),
+			 * so custom and company labels files are tried against two
+			 * possible layouts: with the collection's top-level tree name
+			 * folded into the path (a custom/company file organised as a
+			 * mirror of the common collection, tree name included) and
+			 * without it (a file scoped to just this one tree, matching
+			 * how the common collection's own files are written). Custom
+			 * is tried before company, so a user override wins over a
+			 * shared one.
+			 */
+		QStringList path_from_root = path;
+		path_from_root << collection_root;
 
-		while(!rxml.atEnd())
-		{
-			if (rxml.attributes().value("name").toString() == path[i])
-			{
-				rxml.readNext();
-				i=i-1;
-					//reached element directory
-				if (i==0)
-				{
-					for (int j=i; j<= dirLevel; j = j +1)
-					{
-							//if there is a prefix available apply prefix
-						if(rxml.name().toString()=="prefix")
-						{
-							return rxml.readElementText();
-						}
-							//if there isn't a prefix available, find parent prefix in parent folder
-						else
-						{
-							while (rxml.readNextStartElement() && rxml.name().toString()!="prefix")
-							{
-								rxml.skipCurrentElement();
-								rxml.readNext();
-							}
-						}
-					}
+		const QStringList candidate_dirs = {
+			QETApp::customElementsDir(),
+			QETApp::companyElementsDir()
+		};
+		for (const QString &dir : candidate_dirs) {
+			const QString candidate =
+					QDir(dir).filePath(QStringLiteral("qet_labels.xml"));
+			for (const QStringList &segments : {path_from_root, path}) {
+				const QString prefix = prefixFromLabelFile(
+							candidate, segments, segments.size() - 1);
+				if (!prefix.isNull()) {
+					return prefix;
 				}
 			}
-			rxml.readNext();
-			}
-		}
-		else
-		{
-		QString qet_labels = "10_electric/qet_labels.xml";
-		QString filepath = QETApp::commonElementsDir().append(qet_labels);
-		QFile file(filepath);
-		file.isReadable();
-		if (!file.open(QFile::ReadOnly | QFile::Text))
-			return QString();
-			
-		rxml.setDevice(&file);
-		rxml.readNext();
-
-		while(!rxml.atEnd())
-		{
-			if (rxml.attributes().value("name").toString() == path[i])
-			{
-				rxml.readNext();
-				i=i-1;
-					//reached element directory
-				if (i==0)
-				{
-					for (int j=i; j<= dirLevel; j = j +1)
-					{
-							//if there is a prefix available apply prefix
-						if(rxml.name().toString()=="prefix")
-						{
-							return rxml.readElementText();
-						}
-							//if there isn't a prefix available, find parent prefix in parent folder
-						else
-						{
-							while (rxml.readNextStartElement() && rxml.name().toString()!="prefix")
-							{
-								rxml.skipCurrentElement();
-								rxml.readNext();
-							}
-						}
-					}
-				}
-			}
-			rxml.readNext();
-		}
 		}
 		return QString();
 	}

sources/autoNum/ui/folioautonumbering.cpp

@@ -54,6 +54,10 @@ FolioAutonumberingW::~FolioAutonumberingW()
 */
 void FolioAutonumberingW::setContext(QList <QString> autonums)
 {
+		// Replace the list rather than append to it: this is called again
+		// whenever the project's numberings change (import, for instance),
+		// and appending gave a second copy of every name.
+	ui->m_autonums_cb->clear();
 	foreach (QString str, autonums) { ui->m_autonums_cb->addItem(str);}
 }
 

sources/bomexport.cpp

@@ -0,0 +1,133 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "bomexport.h"
+
+#include <QSaveFile>
+#include <QSqlQuery>
+#include <QSqlRecord>
+#include <QVariant>
+
+namespace {
+QString csvField(QString value)
+{
+	value.replace(QLatin1Char('"'), QStringLiteral("\"\""));
+	return QLatin1Char('"') + value + QLatin1Char('"');
+}
+
+QByteArray csvRecord(const QStringList &values)
+{
+	QStringList escaped;
+	for (const auto &value : values) {
+		escaped.append(csvField(value));
+	}
+	return (escaped.join(QLatin1Char(';')) + QLatin1Char('\n')).toUtf8();
+}
+}
+
+QStringList BomExport::defaultColumns()
+{
+	return {
+		QStringLiteral("label"),
+		QStringLiteral("designation"),
+		QStringLiteral("manufacturer"),
+		QStringLiteral("manufacturer_reference"),
+		QStringLiteral("model"),
+		QStringLiteral("description"),
+		QStringLiteral("category"),
+		QStringLiteral("quantity"),
+		QStringLiteral("voltage_rating"),
+		QStringLiteral("current_rating"),
+		QStringLiteral("folio"),
+		QStringLiteral("notes")
+	};
+}
+
+QString BomExport::defaultQuery()
+{
+		//Slaves and terminals are included because both are routinely
+		//separately orderable hardware. A circuit breaker can carry ten or
+		//twenty auxiliary blocks, each with its own order code, and a
+		//terminal block is a purchased part in its own right. Neither shares
+		//a line with its master: the query is ungrouped, one row per element,
+		//so each appears as the distinct item it is.
+		//
+		//Anything that should not be ordered is kept out by setting
+		//exclude_from_bom on the element, which the view already honours --
+		//a relay's own auxiliary contact, say.
+		//
+		//Thumbnails are deliberately left out for now even though ten of
+		//them in the shipped examples carry manufacturer and reference data
+		//(the assembly-plan mounting-plate symbols), because that has not
+		//been asked for and is a separate question. The folio report arrows
+		//and the conductor definition stay out because they are not hardware.
+		//
+		//See discussion #847.
+	return QStringLiteral("SELECT %1 FROM element_nomenclature_view "
+						  "WHERE element_type IN "
+						  "('simple', 'master', 'slave', 'terminal') "
+						  "ORDER BY diagram_position, position, label")
+			.arg(defaultColumns().join(QStringLiteral(", ")));
+}
+
+QByteArray BomExport::toCsv(QSqlQuery &query, const QStringList &headers,
+							bool include_headers, int *row_count)
+{
+	QByteArray csv("\xEF\xBB\xBF");
+	if (include_headers) {
+		csv += csvRecord(headers);
+	}
+	int rows = 0;
+	while (query.next())
+	{
+		QStringList values;
+		for (int i = 0; i < query.record().count(); ++i) {
+			values.append(query.value(i).toString());
+		}
+		csv += csvRecord(values);
+		++rows;
+	}
+	if (row_count) {
+		*row_count = rows;
+	}
+	return csv;
+}
+
+bool BomExport::writeCsv(const QString &file_path, const QByteArray &csv,
+						 QString *error)
+{
+	if (error) {
+		error->clear();
+	}
+	QSaveFile file(file_path);
+	if (!file.open(QIODevice::WriteOnly) || file.write(csv) != csv.size())
+	{
+		if (error) {
+			*error = file.errorString();
+		}
+		file.cancelWriting();
+		return false;
+	}
+	if (!file.commit())
+	{
+		if (error) {
+			*error = file.errorString();
+		}
+		return false;
+	}
+	return true;
+}

sources/bomexport.h

@@ -0,0 +1,37 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef BOMEXPORT_H
+#define BOMEXPORT_H
+
+#include <QByteArray>
+#include <QString>
+#include <QStringList>
+
+class QSqlQuery;
+
+namespace BomExport
+{
+	QStringList defaultColumns();
+	QString defaultQuery();
+	QByteArray toCsv(QSqlQuery &query, const QStringList &headers,
+					 bool include_headers = true, int *row_count = nullptr);
+	bool writeCsv(const QString &file_path, const QByteArray &csv,
+				  QString *error = nullptr);
+}
+
+#endif // BOMEXPORT_H

sources/cli_export.cpp

@@ -16,6 +16,7 @@
 	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "cli_export.h"
+#include "bomexport.h"
 
 #include "bordertitleblock.h"
 #include "conductornumexport.h"
@@ -39,6 +40,7 @@
 #include <QDomDocument>
 #include <QDate>
 #include <QFile>
+#include <QSaveFile>
 #include <QFileInfo>
 #include <QJsonArray>
 #include <QJsonDocument>
@@ -70,6 +72,7 @@ const QHash<QString, QString> &exportFlags()
 		{"--export-cables", "cables"},
 		{"--export-wires", "wires"},
 		{"--export-bom", "bom"},
+		{"--export-wiring", "wiring"},
 		{"--export-nets", "nets"},
 		{"--export-links", "links"},
 		{"--info", "info"},
@@ -302,61 +305,40 @@ int exportCsv(QETProject &project, const QString &format, const QString &output)
 	return 0;
 }
 
-/// Quote a field for CSV output (RFC-4180 style, ';' delimiter).
-QString csvField(const QString &value)
-{
-	if (value.contains(';') || value.contains('"')
-		|| value.contains('\n') || value.contains('\r')) {
-		QString v = value;
-		v.replace('"', "\"\"");
-		return '"' % v % '"';
-	}
-	return value;
-}
-
-/// Bill of materials: one row per element, key component-data fields.
-/// Pulls from QET's own project database (the same source as the GUI BOM
-/// export), so the output matches what the editor produces.
+/// Bill of materials from the same project database and default query as the
+/// GUI nomenclature export.
 int exportBom(QETProject &project, const QString &output)
 {
-	// The project database is built lazily; force a (re)build before querying.
 	project.dataBase()->updateDB();
-
-	static const QStringList columns {
-		"label", "designation", "manufacturer", "manufacturer_reference",
-		"quantity", "location", "function", "title", "folio"
-	};
-
-	QSqlQuery query = project.dataBase()->newQuery(
-		"SELECT " % columns.join(", ") %
-		" FROM element_nomenclature_view ORDER BY label");
+	QSqlQuery query = project.dataBase()->newQuery(BomExport::defaultQuery());
 	if (!query.exec()) {
 		err << "BOM query failed: " << query.lastError().text() << "\n";
 		return 1;
 	}
-
-	QString csv = columns.join(";") % "\n";
 	int rows = 0;
-	while (query.next()) {
-		QStringList values;
-		for (int i = 0; i < columns.size(); ++i)
-			values << csvField(query.value(i).toString());
-		csv += values.join(";") % "\n";
-		++rows;
-	}
-
-	QFile file(output);
-	if (!file.open(QIODevice::WriteOnly | QIODevice::Text)) {
-		err << "Cannot open '" << output << "' for writing.\n";
+	const auto csv = BomExport::toCsv(
+			query, BomExport::defaultColumns(), true, &rows);
+	QString error;
+	if (!BomExport::writeCsv(output, csv, &error)) {
+		err << "Cannot write '" << output << "': " << error << "\n";
 		return 1;
 	}
-	QTextStream fout(&file);
-	fout << csv;
-	file.close();
 	out << "Exported " << rows << " component(s) -> " << output << "\n";
 	return 0;
 }
 
+QString csvField(const QString &value)
+{
+	if (value.contains(QLatin1Char(';')) || value.contains(QLatin1Char('"'))
+			|| value.contains(QLatin1Char('\n')) || value.contains(QLatin1Char('\r')))
+	{
+		QString escaped = value;
+		escaped.replace(QLatin1Char('"'), QStringLiteral("\"\""));
+		return QLatin1Char('"') % escaped % QLatin1Char('"');
+	}
+	return value;
+}
+
 /// Count terminals on @p element that no conductor connects to.
 int freeTerminals(Element *element)
 {
@@ -543,6 +525,70 @@ QHash<Element *, int> folioIndex(QETProject &project)
 	return folio;
 }
 
+/// From-to wiring list: one row per conductor, each endpoint resolved to its
+/// element label and terminal name.
+///
+/// Reads wiring_list_view out of the project database. --export-cables produces
+/// the same logical list from the document XML instead, and the two are meant
+/// to agree: running both and diffing them is a direct check that the database
+/// still describes the project, which is otherwise only observable through the
+/// GUI.
+int exportWiring(QETProject &project, const QString &output)
+{
+	// The project database is built lazily; force a (re)build before querying.
+	project.dataBase()->updateDB();
+
+	static const QStringList columns {
+		"wire_number", "from_element_label", "from_terminal",
+		"to_element_label", "to_terminal", "diagram_position", "conductor_uuid"
+	};
+
+	QSqlQuery query = project.dataBase()->newQuery(
+		"SELECT " % columns.join(", ") %
+		" FROM wiring_list_view"
+		//Wire numbers are text, so a plain sort puts "10" before "9".
+		//Numeric ones first, ordered by value; anything non-numeric after,
+		//ordered as text. The trailing wire_number keeps ties stable.
+		" ORDER BY diagram_position,"
+		" CASE WHEN wire_number GLOB '[0-9]*' THEN 0 ELSE 1 END,"
+		" CAST(wire_number AS INTEGER),"
+		" wire_number");
+	if (!query.exec()) {
+		err << "Wiring list query failed: " << query.lastError().text() << "\n";
+		return 1;
+	}
+
+	QString csv = columns.join(";") % "\n";
+	int rows = 0;
+	while (query.next()) {
+		QStringList values;
+		for (int i = 0; i < columns.size(); ++i)
+			values << csvField(query.value(i).toString());
+		csv += values.join(";") % "\n";
+		++rows;
+	}
+
+		//Written through QSaveFile so a failure part-way leaves the previous
+		//file intact rather than a truncated one, and with a UTF-8 byte order
+		//mark: without it Excel opens a .csv as the local 8-bit codepage and
+		//mangles any accented element label. Qt writes UTF-8 by default, so
+		//the bytes were already right -- the mark is what tells Excel so.
+	QSaveFile file(output);
+	if (!file.open(QIODevice::WriteOnly)) {
+		err << "Cannot open '" << output << "' for writing.\n";
+		return 1;
+	}
+	static const char utf8_bom[] = "\xEF\xBB\xBF";
+	file.write(utf8_bom, 3);
+	file.write(csv.toUtf8());
+	if (!file.commit()) {
+		err << "Cannot write '" << output << "': " << file.errorString() << "\n";
+		return 1;
+	}
+	out << "Exported " << rows << " conductor(s) -> " << output << "\n";
+	return 0;
+}
+
 /// Electrical nets: groups of terminals joined into one potential.
 /// Walks QET's own potential graph, so each net is a connected component
 /// of terminals across all folios. The ground truth for connectivity.
@@ -847,6 +893,8 @@ int run(const QStringList &args)
 		return exportCsv(project, format, output);
 	if (format == "bom")
 		return exportBom(project, output);
+	if (format == "wiring")
+		return exportWiring(project, output);
 	if (format == "nets")
 		return exportNets(project, output);
 	if (format == "links")

sources/cli_export.h

@@ -48,6 +48,7 @@ namespace CLIExport {
 		  qelectrotech --export-cables  <project.qet> <output.csv>
 		  qelectrotech --export-wires   <project.qet> <output.csv>
 		  qelectrotech --export-bom     <project.qet> <output.csv>
+		  qelectrotech --export-wiring  <project.qet> <output.csv>
 		  qelectrotech --export-nets    <project.qet> <output.json>
 		  qelectrotech --export-links   <project.qet> <output.csv>
 		  qelectrotech --info           <project.qet> [output.json]
@@ -64,6 +65,11 @@ namespace CLIExport {
 		cables: wiring list (one row per conductor) as CSV.
 		wires: list of distinct wire numbers as CSV.
 		bom: bill of materials (one row per element) as CSV.
+		wiring: from-to wiring list (one row per conductor) as CSV, read from
+		        the project database. Same logical list as `cables`, which
+		        reads the document XML instead; the two are meant to agree,
+		        so diffing them checks that the database still describes the
+		        project.
 		nets: electrical nets (connected-terminal groups) as JSON.
 		links: element cross-references (coil/contact) as CSV, with
 		       unresolved links flagged.

sources/conductornumexport.cpp

@@ -124,15 +124,15 @@ void ConductorNumExport::fillHash()
 				continue;
 			}
 
-			//We must define if the connected terminal is a folio report, if it is the case
-			//we don't add the num to the hash because the terminal doesn't represent a real terminal.
-			if(!(c->terminal1->parentElement()->linkType() & Element::AllReport))
-			{
-				int value = m_hash.value(num, 0);
-				++value;
-				m_hash.insert(num, value);
-			}
-			if(!(c->terminal2->parentElement()->linkType() & Element::AllReport))
+			//We must define if the connected terminals are folio reports, if
+			//both are the case we don't add the num to the hash because
+			//neither terminal represents a real terminal. Otherwise the
+			//conductor counts once, regardless of how many of its two ends
+			//are real -- counting per terminal instead of per conductor
+			//doubled every ordinary two-real-terminal conductor's tally.
+			bool terminal1_is_report = c->terminal1->parentElement()->linkType() & Element::AllReport;
+			bool terminal2_is_report = c->terminal2->parentElement()->linkType() & Element::AllReport;
+			if (!(terminal1_is_report && terminal2_is_report))
 			{
 				int value = m_hash.value(num, 0);
 				++value;

sources/contactusage.h

@@ -0,0 +1,91 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef CONTACTUSAGE_H
+#define CONTACTUSAGE_H
+
+#include <algorithm>
+
+/**
+	@brief The ContactUsage struct
+	How many slave contacts a master element currently uses, broken down
+	by contact type.
+
+	Header-only and free of any graphics dependency so that the counting
+	rules can be unit tested on their own. MasterElement::contactUsage()
+	is the thin wrapper that feeds it the linked elements.
+
+	This counts contacts, which is what tells you how many contacts an
+	auxiliary block must provide. It is deliberately not the count that
+	MasterElement::isFull() uses: a master's max_slaves is a number of
+	slots, and a slave fills exactly one slot however many contacts it
+	carries.
+
+	Two rules are easy to get wrong, and both live here so that every
+	caller gets them right:
+	 - a slave stands for as many contacts as its "number" kind
+	   information says, so a 4 pole contact counts as 4, not as 1
+	 - a changeover contact is counted once, as sw. CrossRefItem's
+	   NOElements() and NCElements() both return it, so adding those two
+	   lists together would count it twice.
+*/
+struct ContactUsage
+{
+	/**
+		Contact types a slave can declare. Mirrors
+		ElementData::SlaveState, which is not used directly so that this
+		header stays free of the element data dependencies and can be
+		unit tested on its own. MasterElement::contactUsage() maps
+		between the two.
+	*/
+	enum Type
+	{
+		NO,		///< Normally open
+		NC,		///< Normally closed
+		SW,		///< Changeover
+		Other	///< Neither of the above
+	};
+
+	int no    = 0;	///< Normally open
+	int nc    = 0;	///< Normally closed
+	int sw    = 0;	///< Changeover
+	int other = 0;	///< Neither of the above
+
+	int total() const { return no + nc + sw + other; }
+
+	/**
+		Add one slave element to the tally.
+		@param type     the contact type the slave declares
+		@param contacts how many contacts it stands for. Values below 1
+		                are treated as 1: an element which declares no
+		                contact count is still one contact.
+	*/
+	void addSlave(Type type, int contacts)
+	{
+		const int n = std::max(1, contacts);
+
+		switch (type)
+		{
+			case NO:    no    += n; break;
+			case NC:    nc    += n; break;
+			case SW:    sw    += n; break;
+			case Other: other += n; break;
+		}
+	}
+};
+
+#endif // CONTACTUSAGE_H

sources/dataBase/projectdatabase.cpp

@@ -53,6 +53,7 @@ projectDataBase::projectDataBase(QETProject *project, QObject *parent) :
 	});
 	connect(m_project, &QETProject::projectDiagramsOrderChanged, [this]()
 	{
+		m_content_changed = true;
 		for (auto diagram : m_project->diagrams())
 		{
 			m_diagram_order_changed.bindValue(":pos", m_project->folioIndex(diagram)+1);
@@ -85,14 +86,42 @@ projectDataBase::~projectDataBase()
 */
 void projectDataBase::updateDB()
 {
+		//A bulk operation is in progress and updates the database itself once
+		//it is done : rebuilding now would only be thrown away by that final
+		//rebuild. @see setUpdateBlocked().
+	if (m_update_blocked) {
+		return;
+	}
+
+		//Nothing in the project has changed since the last rebuild, so
+		//repopulating would insert exactly the rows that are already there.
+		//The signal is still emitted : callers and models rely on it to
+		//refresh, and what they read back is unchanged either way.
+	if (!m_content_changed)
+	{
+		emit dataBaseUpdated();
+		return;
+	}
+
 	populateDiagramTable();
 	populateDiagramInfoTable();
 	populateElementTable();
 	populateElementInfoTable();
 	populateConductorTable();
+	m_content_changed = false;
+
 	emit dataBaseUpdated();
 }
 
+/**
+	@brief projectDataBase::setUpdateBlocked
+	@param blocked : whether updateDB() should skip the full rebuild
+*/
+void projectDataBase::setUpdateBlocked(bool blocked)
+{
+	m_update_blocked = blocked;
+}
+
 /**
 	@brief projectDataBase::project
 	@return the project of this  database
@@ -111,35 +140,65 @@ QSqlQuery projectDataBase::newQuery(const QString &query) {
 	return QSqlQuery(query, m_data_base);
 }
 
+/**
+	@brief projectDataBase::excludedConductorCount
+	@return how many conductors of the project are absent from the conductor
+	table because an endpoint has no parent element to key on.
+
+	Counted from the live scene rather than from the database, precisely
+	because the database is where these conductors are *not*.
+
+	This used to count conductors whose terminals had no uuid, which was most
+	of them on most projects. Terminal::stableUuid() now derives an identity
+	from the terminal's geometry when the definition provides no uuid, so that
+	is no longer a reason to exclude anything, and this counts only the case
+	that remains genuinely unkeyable.
+
+	This is what lets a caller tell the user "N wires are missing and here
+	is why", instead of silently presenting a short list as if it were
+	complete.
+*/
+int projectDataBase::excludedConductorCount() const
+{
+	if (!m_project) {
+		return 0;
+	}
+
+	int count = 0;
+	for (auto *diagram : m_project->diagrams())
+	{
+		const auto conductor_list = diagram->conductors();
+		for (auto *conductor : conductor_list)
+		{
+				//Must match addConductor()'s guard exactly, or this reports
+				//wires as missing that the list is in fact showing.
+			if (!conductor->terminal1->parentElement()
+				|| !conductor->terminal2->parentElement()) {
+				++count;
+			}
+		}
+	}
+	return count;
+}
+
 /**
 	@brief projectDataBase::addElement
 	@param element
 */
 void projectDataBase::addElement(Element *element)
 {
+	m_content_changed = true;
 	if (!element || !element->diagram()) {
 		qDebug() << "projectDataBase::addElement: null element or diagram";
 		return;
 	}
 
-	m_insert_elements_query.bindValue(":uuid", element->uuid().toString());
-	m_insert_elements_query.bindValue(":diagram_uuid", element->diagram()->uuid().toString());
-	m_insert_elements_query.bindValue(":pos", element->diagram()->convertPosition(element->scenePos()).toString());
-	m_insert_elements_query.bindValue(":type", element->elementData().typeToString());
-	m_insert_elements_query.bindValue(":sub_type", element->kindInformations()["type"].toString());
+	bindElementValues(m_insert_elements_query, element, element->diagram());
 	if (!m_insert_elements_query.exec()) {
 		qDebug() << "projectDataBase::addElement insert element error : " << m_insert_elements_query.lastError();
 	}
 
-	m_insert_element_info_query.bindValue(":uuid", element->uuid().toString());
-	auto hash = elementInfoToString(element);
-	for (auto key : hash.keys())
-	{
-		QString value = hash.value(key);
-		QString bind = key.prepend(":");
-		m_insert_element_info_query.bindValue(bind, value);
-	}
-
+	bindElementInfoValues(m_insert_element_info_query, element);
 	if (!m_insert_element_info_query.exec()) {
 		qDebug() << "projectDataBase::addElement insert element info error : " << m_insert_element_info_query.lastError();
 	} else {
@@ -153,6 +212,7 @@ void projectDataBase::addElement(Element *element)
 */
 void projectDataBase::removeElement(Element *element)
 {
+	m_content_changed = true;
 	m_remove_element_query.bindValue(":uuid", element->uuid().toString());
 	if(!m_remove_element_query.exec()) {
 		qDebug() << "projectDataBase::removeElement remove error : " << m_remove_element_query.lastError();
@@ -167,6 +227,7 @@ void projectDataBase::removeElement(Element *element)
 */
 void projectDataBase::elementInfoChanged(Element *element)
 {
+	m_content_changed = true;
 	auto hash = elementInfoToString(element);
 	for (auto str : QETInformation::elementInfoKeys()) {
 		m_update_element_query.bindValue(":" + str, hash.value(str));
@@ -181,6 +242,7 @@ void projectDataBase::elementInfoChanged(Element *element)
 
 void projectDataBase::elementInfoChanged(QList<Element *> elements)
 {
+	m_content_changed = true;
 	this->blockSignals(true);
 		//Block signal for not emit dataBaseUpdated at
 		//each call of the method elementInfoChanged(Element *element)
@@ -197,6 +259,7 @@ void projectDataBase::elementInfoChanged(QList<Element *> elements)
 
 void projectDataBase::addDiagram(Diagram *diagram)
 {
+	m_content_changed = true;
 	m_insert_diagram_query.bindValue(":uuid", diagram->uuid().toString());
 	m_insert_diagram_query.bindValue(":pos", m_project->folioIndex(diagram)+1);
 	if(!m_insert_diagram_query.exec()) {
@@ -225,6 +288,7 @@ void projectDataBase::addDiagram(Diagram *diagram)
 
 void projectDataBase::removeDiagram(Diagram *diagram)
 {
+	m_content_changed = true;
 	const QString uuid_str = diagram->uuid().toString();
 
 		//Order matters: element_info and terminal are scoped through a
@@ -280,6 +344,7 @@ void projectDataBase::removeDiagram(Diagram *diagram)
 
 void projectDataBase::diagramInfoChanged(Diagram *diagram)
 {
+	m_content_changed = true;
 	bindDiagramInfoValues(m_update_diagram_info_query, diagram);
 
 	if (!m_update_diagram_info_query.exec()) {
@@ -291,6 +356,7 @@ void projectDataBase::diagramInfoChanged(Diagram *diagram)
 
 void projectDataBase::diagramOrderChanged()
 {
+	m_content_changed = true;
 }
 
 /**
@@ -299,6 +365,7 @@ void projectDataBase::diagramOrderChanged()
 */
 void projectDataBase::addConductor(Conductor *conductor)
 {
+	m_content_changed = true;
 	if (!conductor || !conductor->diagram()) {
 		qDebug() << "projectDataBase::addConductor: null conductor or diagram";
 		return;
@@ -332,6 +399,7 @@ void projectDataBase::addConductor(Conductor *conductor)
 */
 void projectDataBase::removeConductor(Conductor *conductor)
 {
+	m_content_changed = true;
 	m_remove_conductor_query.bindValue(":uuid", conductor->uuid().toString());
 	if (!m_remove_conductor_query.exec()) {
 		qDebug() << "projectDataBase::removeConductor delete error : " << m_remove_conductor_query.lastError();
@@ -352,6 +420,7 @@ void projectDataBase::removeConductor(Conductor *conductor)
 */
 void projectDataBase::updateConductor(Conductor *conductor)
 {
+	m_content_changed = true;
 	if (!conductor) {
 		return;
 	}
@@ -394,6 +463,7 @@ void projectDataBase::watchConductor(Conductor *conductor)
 */
 void projectDataBase::conductorPropertiesChanged()
 {
+	m_content_changed = true;
 	if (auto *conductor = qobject_cast<Conductor *>(sender())) {
 		updateConductor(conductor);
 	}
@@ -550,6 +620,7 @@ bool projectDataBase::createDataBase()
 
 	createElementNomenclatureView();
 	createSummaryView();
+	createWiringListView();
 	prepareQuery();
 	updateDB();
 	return true;
@@ -570,6 +641,11 @@ void projectDataBase::createElementNomenclatureView()
 						 "ei.designation AS designation,"
 						 "ei.manufacturer AS manufacturer,"
 						 "ei.manufacturer_reference AS manufacturer_reference,"
+						 "ei.model AS model,"
+						 "ei.category AS category,"
+						 "ei.voltage_rating AS voltage_rating,"
+						 "ei.current_rating AS current_rating,"
+						 "ei.notes AS notes,"
 						 "ei.machine_manufacturer_reference AS machine_manufacturer_reference,"
 						 "ei.supplier AS supplier,"
 						 "ei.quantity AS quantity,"
@@ -628,7 +704,21 @@ void projectDataBase::createElementNomenclatureView()
 						 "di.folio AS folio,"
 						 "e.pos AS position "
 						 " FROM element_info ei, diagram_info di, element e, diagram d"
-						 " WHERE ei.element_uuid = e.uuid AND e.diagram_uuid = d.uuid AND di.diagram_uuid = d.uuid AND (ei.exclude_from_bom IS NOT 'true')");
+						 " WHERE ei.element_uuid = e.uuid AND e.diagram_uuid = d.uuid AND di.diagram_uuid = d.uuid"
+						 " AND COALESCE(LOWER(TRIM(ei.exclude_from_bom)), '') NOT IN ('true', '1', 'yes', 'on')"
+							//The element table holds every element of the project; which
+							//kinds belong in a nomenclature is this view's business, not
+							//the table's. Kept identical to the mask populateElementTable()
+							//used to apply, so what this view returns does not change --
+							//a slave element (a relay contact) is still not a line item.
+							 //Slave is here because an auxiliary contact block is
+							 //separately orderable hardware with its own part
+							 //number, even though it shares its master's BMK.
+							 //Anything that should not be ordered -- a relay's
+							 //own auxiliary contact, say -- is kept out by
+							 //exclude_from_bom above, not by its base type.
+							 //See discussion #847.
+						 " AND e.type IN ('simple', 'terminal', 'master', 'slave', 'thumbnail')");
 
 	QSqlQuery query(m_data_base);
 	if (!query.exec(create_view)) {
@@ -667,6 +757,64 @@ void projectDataBase::createSummaryView()
 	}
 }
 
+/**
+	@brief projectDataBase::createWiringListView
+	A from-to wiring list: one row per conductor, each endpoint resolved to
+	its element label and terminal name.
+
+	Two deliberate differences from an ordinary inner-join view like
+	element_nomenclature_view:
+
+	- No join to the element table. A terminal row already carries its
+	  element_uuid, so joining element back just to read the same uuid adds
+	  nothing -- and would actively drop rows, because populateElementTable()
+	  only inserts elements matching Simple|Terminal|Master|Thumbnail. Slave
+	  elements (relay contacts and the like, extremely common at the end of a
+	  wire) and report elements are absent from that table after a project
+	  load, so an inner join through it silently loses their conductors.
+	- element_info is LEFT joined for the same reason. A wire whose endpoint
+	  element carries no info row still belongs in a wiring list; it comes
+	  back with an empty label rather than vanishing. Losing a wire from a
+	  wiring list is a worse failure than showing one with a blank end.
+
+	- diagram is LEFT joined for the same reason. It should
+	  always match, since QETProject::diagramAdded is wired to addDiagram()
+	  and a conductor cannot exist before its folio -- but an inner join here
+	  would make that an assumption the view silently enforces, and a wire
+	  missing from a wiring list is the one failure this view must not have.
+
+	The result is that this view returns exactly as many rows as the
+	conductor table holds -- what is already excluded upstream (conductors
+	on legacy terminals without uuids) stays excluded, and nothing new is
+	dropped here. Only the terminal joins are inner, and both are guaranteed
+	by insertTerminal() running for each endpoint before the conductor row
+	is written.
+*/
+void projectDataBase::createWiringListView()
+{
+	QString create_view ("CREATE VIEW wiring_list_view AS SELECT "
+						 "c.uuid AS conductor_uuid,"
+						 "c.text AS wire_number,"
+						 "t1.element_uuid AS from_element_uuid,"
+						 "ei1.label AS from_element_label,"
+						 "t1.name AS from_terminal,"
+						 "t2.element_uuid AS to_element_uuid,"
+						 "ei2.label AS to_element_label,"
+						 "t2.name AS to_terminal,"
+						 "d.pos AS diagram_position"
+						 " FROM conductor c"
+						 " JOIN terminal t1 ON c.terminal1_uuid = t1.uuid AND c.terminal1_element_uuid = t1.element_uuid"
+						 " JOIN terminal t2 ON c.terminal2_uuid = t2.uuid AND c.terminal2_element_uuid = t2.element_uuid"
+						 " LEFT JOIN element_info ei1 ON t1.element_uuid = ei1.element_uuid"
+						 " LEFT JOIN element_info ei2 ON t2.element_uuid = ei2.element_uuid"
+						 " LEFT JOIN diagram d ON c.diagram_uuid = d.uuid");
+
+	QSqlQuery query(m_data_base);
+	if (!query.exec(create_view)) {
+		qDebug() << query.lastError();
+	}
+}
+
 void projectDataBase::populateDiagramTable()
 {
 	QSqlQuery query_(m_data_base);
@@ -682,6 +830,30 @@ void projectDataBase::populateDiagramTable()
 	}
 }
 
+/**
+	@brief allElementTypes
+	Every ElementData::Type, i.e. no filtering at all.
+
+	The element table used to be populated with only
+	Simple|Terminal|Master|Thumbnail, which quietly made it "the elements a
+	nomenclature cares about" rather than "the elements of the project".
+	Anything else reading the table -- the wiring list, and terminal plans
+	later -- then could not see slave elements (relay contacts) or report
+	elements, which are ordinary conductor endpoints. The filter now lives in
+	element_nomenclature_view, where it belongs; see createElementNomenclatureView().
+*/
+static ElementData::Types allElementTypes()
+{
+	return ElementData::Simple
+		   | ElementData::NextReport
+		   | ElementData::PreviousReport
+		   | ElementData::Master
+		   | ElementData::Slave
+		   | ElementData::Terminal
+		   | ElementData::Thumbnail
+		   | ElementData::ConductorDefinition;
+}
+
 /**
 	@brief projectDataBase::populateElementTable
 	Populate the element table
@@ -694,16 +866,11 @@ void projectDataBase::populateElementTable()
 	for (auto diagram : m_project->diagrams())
 	{
 		const ElementProvider ep(diagram);
-		const auto elmt_vector = ep.find(ElementData::Simple | ElementData::Terminal | ElementData::Master | ElementData::Thumbnail);
+		const auto elmt_vector = ep.find(allElementTypes());
 			//Insert all values into the database
 		for (const auto &elmt : elmt_vector)
 		{
-			const auto elmt_data = elmt->elementData();
-			m_insert_elements_query.bindValue(":uuid", elmt->uuid().toString());
-			m_insert_elements_query.bindValue(":diagram_uuid", diagram->uuid().toString());
-			m_insert_elements_query.bindValue(":pos", diagram->convertPosition(elmt->scenePos()).toString());
-			m_insert_elements_query.bindValue(":type", elmt_data.typeToString());
-			m_insert_elements_query.bindValue(":sub_type", elmt_data.masterTypeToString());
+			bindElementValues(m_insert_elements_query, elmt, diagram);
 			if (!m_insert_elements_query.exec()) {
 				qDebug() << "projectDataBase::populateElementTable insert error : " << m_insert_elements_query.lastError();
 			}
@@ -723,20 +890,12 @@ void projectDataBase::populateElementInfoTable()
 	for (const auto &diagram : m_project->diagrams())
 	{
 		const ElementProvider ep(diagram);
-		const auto elmt_vector = ep.find(ElementData::Simple | ElementData::Terminal | ElementData::Master | ElementData::Thumbnail);
+		const auto elmt_vector = ep.find(allElementTypes());
 
 			//Insert all values into the database
 		for (const auto &elmt : elmt_vector)
 		{
-			m_insert_element_info_query.bindValue(QStringLiteral(":uuid"), elmt->uuid().toString());
-			const auto hash = elementInfoToString(elmt);
-			for (const auto &key : hash.keys())
-			{
-				QString value = hash.value(key);
-				QString bind = QStringLiteral(":") + key;
-				m_insert_element_info_query.bindValue(bind, value);
-			}
-
+			bindElementInfoValues(m_insert_element_info_query, elmt);
 			if (!m_insert_element_info_query.exec()) {
 				qDebug() << "projectDataBase::populateElementInfoTable insert error : " << m_insert_element_info_query.lastError();
 			}
@@ -943,6 +1102,52 @@ QHash<QString, QString> projectDataBase::elementInfoToString(Element *elmt)
 	return hash;
 }
 
+/**
+	@brief projectDataBase::bindElementValues
+	Bind one element's row for the element table.
+
+	Shared by addElement() (a single element added to a live diagram) and
+	populateElementTable() (a full rebuild), because those two used to bind
+	the same row differently: the incremental path wrote
+	kindInformations()["type"] into sub_type while the bulk path wrote
+	elementData().masterTypeToString(). The element table therefore held
+	different values depending on whether the project had been reloaded
+	since the element was placed. One binder means live and reloaded agree
+	by construction rather than by coincidence.
+
+	The bulk path's values are the ones kept: they are what every already
+	saved project contains, so nothing a reload produces changes.
+	@param query : prepared insert query to bind into
+	@param element : element to bind
+	@param diagram : diagram holding @element
+*/
+void projectDataBase::bindElementValues(QSqlQuery &query, Element *element, Diagram *diagram)
+{
+	const auto element_data = element->elementData();
+	query.bindValue(QStringLiteral(":uuid"), element->uuid().toString());
+	query.bindValue(QStringLiteral(":diagram_uuid"), diagram->uuid().toString());
+	query.bindValue(QStringLiteral(":pos"), diagram->convertPosition(element->scenePos()).toString());
+	query.bindValue(QStringLiteral(":type"), element_data.typeToString());
+	query.bindValue(QStringLiteral(":sub_type"), element_data.masterTypeToString());
+}
+
+/**
+	@brief projectDataBase::bindElementInfoValues
+	Bind one element's row for the element info table.
+	Shared by addElement() and populateElementInfoTable() for the same
+	reason as bindElementValues().
+	@param query : prepared insert query to bind into
+	@param element : element to bind
+*/
+void projectDataBase::bindElementInfoValues(QSqlQuery &query, Element *element)
+{
+	query.bindValue(QStringLiteral(":uuid"), element->uuid().toString());
+	const auto hash = elementInfoToString(element);
+	for (const auto &key : hash.keys()) {
+		query.bindValue(QStringLiteral(":") + key, hash.value(key));
+	}
+}
+
 void projectDataBase::bindDiagramInfoValues(QSqlQuery &query, Diagram *diagram)
 {
 	query.bindValue(":uuid", diagram->uuid());

sources/dataBase/projectdatabase.h

@@ -47,8 +47,21 @@ class projectDataBase : public QObject
 		virtual ~projectDataBase() override;
 
 		void updateDB();
+			/**
+				Suppress the full rebuild performed by updateDB().
+
+				While blocked, updateDB() returns immediately instead of
+				repopulating every table. Meant for bulk operations -- notably
+				loading a project, where each table model re-queries the
+				database as it is built and would otherwise trigger one
+				complete rebuild of it. The caller unblocks and calls
+				updateDB() once when done; @see QETProject::readProjectXml().
+			*/
+		void setUpdateBlocked(bool blocked);
 		QETProject *project() const;
 		QSqlQuery newQuery(const QString &query = QString());
+		QSqlDatabase database() const {return m_data_base;}
+		int excludedConductorCount() const;
 
 		void addElement         (Element *element);
 		void removeElement      (Element *element);
@@ -77,6 +90,7 @@ class projectDataBase : public QObject
 		bool createDataBase();
 		void createElementNomenclatureView();
 		void createSummaryView();
+		void createWiringListView();
 		void populateDiagramTable();
 		void populateElementTable();
 		void populateElementInfoTable();
@@ -89,9 +103,17 @@ class projectDataBase : public QObject
 		static QHash<QString, QString> elementInfoToString(
 				Element *elmt);
 		void bindDiagramInfoValues(QSqlQuery &query, Diagram *diagram);
+		static void bindElementValues(QSqlQuery &query, Element *element, Diagram *diagram);
+		static void bindElementInfoValues(QSqlQuery &query, Element *element);
 
 	private:
 		QPointer<QETProject> m_project;
+		bool m_update_blocked = false;
+			//Starts true : the database is empty until the first rebuild.
+			//Set by every method of this class that writes rows, cleared by
+			//updateDB(). Callers reach the database from outside only through
+			//newQuery(), and every such call site reads.
+		bool m_content_changed = true;
 		QSqlDatabase m_data_base;
 		QSqlQuery m_insert_elements_query,
 				  m_insert_element_info_query,

sources/dataBase/ui/elementquerywidget.cpp

@@ -160,6 +160,8 @@ void ElementQueryWidget::setQuery(const QString &query)
 			{
 				auto str_type = rxm.captured(1);
 				where.remove(str_type);
+				const bool all_master_types = str_type.contains(
+						ElementData::typeToString(ElementData::Master));
 
 				int c=0;
 				ui->m_simple_cb->setChecked    (str_type.contains(ElementData::typeToString(ElementData::Simple)) ? true : false);
@@ -170,23 +172,23 @@ void ElementQueryWidget::setQuery(const QString &query)
 				if (ui->m_terminal_cb->isChecked()) {
 					++c;
 				}
-				ui->m_coil_cb->setChecked      (str_type.contains(ElementData::masterTypeToString(ElementData::Coil)) ? true : false);
+				ui->m_coil_cb->setChecked      (all_master_types || str_type.contains(ElementData::masterTypeToString(ElementData::Coil)));
 				if (ui->m_coil_cb->isChecked()) {
 					++c;
 				}
-				ui->m_button_cb->setChecked    (str_type.contains(ElementData::masterTypeToString(ElementData::Commutator)) ? true : false);
+				ui->m_button_cb->setChecked    (all_master_types || str_type.contains(ElementData::masterTypeToString(ElementData::Commutator)));
 				if (ui->m_button_cb->isChecked()) {
 					++c;
 				}
-				ui->m_protection_cb->setChecked(str_type.contains(ElementData::masterTypeToString(ElementData::Protection)) ? true : false);
-				if (ui->m_protection_cb) {
+				ui->m_protection_cb->setChecked(all_master_types || str_type.contains(ElementData::masterTypeToString(ElementData::Protection)));
+				if (ui->m_protection_cb->isChecked()) {
 					++c;
 				}
 			ui->m_thumbnail_cb->setChecked  (str_type.contains(ElementData::typeToString(ElementData::Thumbnail)) ? true : false);
 			if (ui->m_thumbnail_cb->isChecked()) {
 				++c;
 			}
-			ui->m_plc_cb->setChecked       (str_type.contains(ElementData::masterTypeToString(ElementData::PLC)) ? true : false);
+			ui->m_plc_cb->setChecked       (all_master_types || str_type.contains(ElementData::masterTypeToString(ElementData::PLC)));
 			if (ui->m_plc_cb->isChecked()) {
 				++c;
 			}
@@ -352,22 +354,32 @@ QString ElementQueryWidget::queryStr() const
 		where +=  QStringLiteral(" element_type = '") += ElementData::typeToString(ElementData::Simple) += "'";
 		b = true;
 	}
-	if (ui->m_button_cb->isChecked())     {
+	const bool all_master_types = ui->m_button_cb->isChecked()
+			&& ui->m_coil_cb->isChecked()
+			&& ui->m_protection_cb->isChecked()
+			&& ui->m_plc_cb->isChecked();
+	if (all_master_types) {
+		if (b) where += " OR";
+		where += QStringLiteral(" element_type = '")
+				 += ElementData::typeToString(ElementData::Master) += "'";
+		b = true;
+	}
+	if (!all_master_types && ui->m_button_cb->isChecked()) {
 		if (b) where +=" OR";
 		where +=  QStringLiteral(" element_sub_type = '") += ElementData::masterTypeToString(ElementData::Commutator) += "'";
 		b = true;
 	}
-	if (ui->m_coil_cb->isChecked()) {
+	if (!all_master_types && ui->m_coil_cb->isChecked()) {
 		if (b) where +=" OR";
 		where +=  QStringLiteral(" element_sub_type = '") += ElementData::masterTypeToString(ElementData::Coil) += "'";
 		b = true;
 	}
-	if (ui->m_protection_cb->isChecked()) {
+	if (!all_master_types && ui->m_protection_cb->isChecked()) {
 		if (b) where +=" OR";
 		where +=  QStringLiteral(" element_sub_type = '") += ElementData::masterTypeToString(ElementData::Protection) += "'";
 		b = true;
 	}
-	if (ui->m_plc_cb->isChecked()) {
+	if (!all_master_types && ui->m_plc_cb->isChecked()) {
 		if (b) where +=" OR";
 		where +=  QStringLiteral(" element_sub_type = '") += ElementData::masterTypeToString(ElementData::PLC) += "'";
 		b = true;

sources/dataBase/ui/summaryquerywidget.cpp

@@ -63,7 +63,6 @@ QString SummaryQueryWidget::queryStr() const
 	QStringList keys = selectedKeys();
 
 	QString select ="SELECT ";
-	QString order_by = " ORDER BY ";
 
 	QString column;
 	bool first = true;
@@ -72,14 +71,29 @@ QString SummaryQueryWidget::queryStr() const
 			first = false;
 		} else {
 			column += ", ";
-			order_by +=", ";
 		}
 		column += key;
-		order_by += key;
 	}
 
 	QString from = " FROM project_summary_view";
 
+		//Always ordered by the folio's own position, never by the columns
+		//the user happened to choose to display. This is a table of
+		//contents: it lists the folios of the project and its order is the
+		//project's order. Ordering by the displayed columns instead meant
+		//that choosing, say, Title as the first column silently sorted the
+		//summary alphabetically (bugtracker #238).
+		//
+		//project_summary_view exposes the position as "pos", from
+		//diagram.pos, which is an INTEGER -- so this sorts numerically and
+		//folio 10 does not land between folio 1 and folio 2. One row per
+		//folio means pos fully determines the order and no secondary key is
+		//needed.
+		//
+		//A user who wants a different order can still write the query by
+		//hand; that path returns above, untouched.
+	QString order_by = " ORDER BY pos";
+
 	QString q(select + column + from + order_by);
 	return q;
 }
@@ -95,6 +109,7 @@ void SummaryQueryWidget::setQuery(const QString &query)
 	if (query.startsWith("SELECT"))
 	{
 		reset();
+		ui->m_edit_sql_query_cb->setChecked(false);
 		ui->m_user_query_le->setText(query);
 
 		QString select = query;
@@ -115,6 +130,17 @@ void SummaryQueryWidget::setQuery(const QString &query)
 				}
 			}
 		}
+
+			//If the query this widget would build from the columns just
+			//parsed above does not match the query as loaded byte-for-byte,
+			//the user wrote it by hand (a join, a subquery, a different
+			//view) and accepting the dialog unmodified must not silently
+			//replace it with a generated one (bugtracker #885).
+		const bool custom_query = query != queryStr();
+		m_custom_query = custom_query ? query : QString();
+		ui->m_edit_sql_query_cb->setChecked(custom_query);
+		ui->m_user_query_le->setEnabled(custom_query);
+		ui->m_info_widget->setDisabled(custom_query);
 	}
 }
 

sources/diagram.cpp

@@ -56,7 +56,20 @@ namespace {
 	/// non-deterministic across process runs for any legacy file.
 	QString elementSortKey(Element *elmt)
 	{
-		return positionKey(elmt->pos());
+			//Position alone is not a total order: two elements can sit at the
+			//same x/y (lmdg.qet has a pair of text elements both at 780,350).
+			//With equal keys std::stable_sort falls back to the order the
+			//scene handed us, which varies per run, so those two swapped
+			//places on every save. The uuid breaks the tie.
+			//
+			//For an element with a persisted uuid attribute this is fully
+			//deterministic. For a legacy element without one, fromXml()
+			//invents a fresh uuid per load, so a collision between two such
+			//elements is no better ordered than before -- but no worse
+			//either, and the tiebreaker is only consulted when the positions
+			//are equal.
+		return positionKey(elmt->pos())
+				+ QLatin1Char(':') + elmt->uuid().toString();
 	}
 
 	/// Sort key for a terminal: its parent element's position, then the
@@ -437,6 +450,34 @@ void Diagram::wheelEvent(QGraphicsSceneWheelEvent *event)
 	QGraphicsScene::wheelEvent(event);
 }
 
+/**
+	@brief Diagram::event
+	QGraphicsScene has its own Tab/Shift+Tab item-focus-chain traversal
+	(mirroring QWidget's), checked before keyPressEvent() is ever reached:
+	by default it would silently consume Tab/Backtab to move focus among
+	the scene's own focusable items. Intercepting the key press here,
+	ahead of that, is the only way to reliably override it: unlike
+	QWidget::focusNextPrevChild(), QGraphicsScene::focusNextPrevChild() is
+	only virtual starting in Qt 6 (guarded by the QT6_VIRTUAL macro), so a
+	Diagram:: override of it would silently do nothing on a Qt 5 build.
+	@param event
+*/
+bool Diagram::event(QEvent *event)
+{
+	if (event->type() == QEvent::KeyPress) {
+		auto *key_event = static_cast<QKeyEvent *>(event);
+		if ((key_event->key() == Qt::Key_Tab || key_event->key() == Qt::Key_Backtab)
+				&& !isReadOnly() && !focusItem()) {
+			bool forward = key_event->key() == Qt::Key_Tab
+					&& !(key_event->modifiers() & Qt::ShiftModifier);
+			selectNextItem(forward);
+			event->accept();
+			return true;
+		}
+	}
+	return QGraphicsScene::event(event);
+}
+
 /**
 	@brief Diagram::keyPressEvent
 	This event is managed by diagram event interface if any.
@@ -650,6 +691,79 @@ QUuid Diagram::uuid()
 	return m_uuid;
 }
 
+/**
+	@brief Diagram::uuidUsedByOtherDiagram
+	A hand-edited or merged project file can contain two folios with the same
+	uuid. The uuid is used as a key (e.g. in the project database), so the
+	second one must get another one.
+	@param uuid
+	@return true if another diagram of the parent project already uses @p uuid
+*/
+bool Diagram::uuidUsedByOtherDiagram(const QUuid &uuid) const
+{
+	if (!m_project) {
+		return false;
+	}
+	const auto diagrams = m_project->diagrams();
+	for (const Diagram *diagram : diagrams) {
+		if (diagram != this && diagram->m_uuid == uuid) {
+			return true;
+		}
+	}
+	return false;
+}
+
+/**
+	@brief Diagram::derivedUuid
+	Name-based (version 5) uuid for a folio that has no usable uuid in the
+	file it is loaded from : either the file predates the uuid attribute, or
+	the uuid it carries is already taken by another folio of the project.
+
+	A random uuid would do as an identity, but it would make saving an
+	unmodified legacy project non-reproducible : every load would invent a
+	different one and write it out (see #754). The name is therefore built
+	only from data read from the file itself -- the project title, the
+	position of the folio in the file and its title -- so the same input file
+	always yields the same uuid. It is computed once, when the folio is
+	loaded, and saved from then on : renaming or moving the folio later does
+	not change it.
+
+	@param root : the <diagram> element being loaded
+	@param reason : distinguishes the two cases above, so that they can not
+	produce the same name
+	@return a uuid not used by any other diagram of the project
+*/
+QUuid Diagram::derivedUuid(const QDomElement &root, const QString &reason) const
+{
+		//Fixed namespace for QElectroTech folio uuids, never change it :
+		//doing so would change the uuid given to every legacy folio.
+	static const QUuid folio_namespace(
+				QStringLiteral("{d5951240-154d-44d6-8277-0092a31d1920}"));
+
+	const int index = m_project
+			? m_project->diagrams().indexOf(const_cast<Diagram *>(this))
+			: -1;
+	const QString project_title = root.ownerDocument()
+			.documentElement()
+			.attribute(QStringLiteral("title"));
+
+	const QString base = QStringLiteral("qet-folio\n%1\n%2\n%3\n%4")
+			.arg(reason,
+				 project_title,
+				 QString::number(index),
+				 root.attribute(QStringLiteral("title")));
+
+		//A clash is only possible with a hand-crafted file, but the uuid is a
+		//key : salt the name until it is free. Still deterministic.
+	QUuid uuid = QUuid::createUuidV5(folio_namespace, base);
+	for (int salt = 1 ; uuidUsedByOtherDiagram(uuid) ; ++salt) {
+		uuid = QUuid::createUuidV5(folio_namespace,
+								   base + QStringLiteral("\n")
+								   + QString::number(salt));
+	}
+	return uuid;
+}
+
 /**
 	@brief Diagram::setEventInterface
 	Set event_interface has current interface.
@@ -865,6 +979,11 @@ QDomDocument Diagram::toXml(bool whole_content, bool is_copy_command) {
 	// schema properties
 	// proprietes du schema
 	if (whole_content) {
+			//Persist the folio identity, so that a folio keeps the same uuid
+			//across save/load. Without it every load invents a new one, and
+			//nothing outside the running instance (version control, a lock,
+			//a diff tool...) can tell which folio is which.
+		dom_root.setAttribute(QStringLiteral("uuid"), m_uuid.toString());
 		border_and_titleblock.titleBlockToXml(dom_root);
 		border_and_titleblock.borderToXml(dom_root);
 
@@ -1365,6 +1484,21 @@ bool Diagram::fromXml(QDomElement &document,
 		// Read attributes of this diagram
 	if (consider_informations)
 	{
+			// Restore the persisted folio uuid. Done first, before any item is
+			// loaded, so that everything created below sees the final uuid.
+			// A folio without a usable one (file written before the uuid was
+			// persisted, or uuid already taken by another folio) gets a
+			// deterministic one instead, see derivedUuid().
+		const QUuid persisted_uuid(root.attribute(QStringLiteral("uuid")));
+		if (persisted_uuid.isNull()) {
+			m_uuid = derivedUuid(root, QStringLiteral("legacy"));
+		} else if (uuidUsedByOtherDiagram(persisted_uuid)) {
+			m_uuid = derivedUuid(root, QStringLiteral("duplicate ")
+								 + persisted_uuid.toString());
+		} else {
+			m_uuid = persisted_uuid;
+		}
+
 		// Load border and titleblock
 		border_and_titleblock.titleBlockFromXml(root);
 		border_and_titleblock.borderFromXml(root);
@@ -1889,6 +2023,85 @@ void Diagram::invertSelection()
 	emit selectionChanged();
 }
 
+/**
+	@brief Diagram::selectAllConductors
+	Select every conductor on this diagram, deselecting anything else.
+*/
+void Diagram::selectAllConductors()
+{
+	if (items().isEmpty()) return;
+
+	blockSignals(true);
+	for (auto item : items()) {
+		item -> setSelected(dynamic_cast<Conductor *>(item) != nullptr);
+	}
+	blockSignals(false);
+	emit selectionChanged();
+}
+
+/**
+	@brief Diagram::selectAllTextFields
+	Select every text field on this diagram (independent/static text,
+	conductor labels, and dynamic element texts), deselecting anything else.
+*/
+void Diagram::selectAllTextFields()
+{
+	if (items().isEmpty()) return;
+
+	blockSignals(true);
+	for (auto item : items()) {
+		item -> setSelected(dynamic_cast<DiagramTextItem *>(item) != nullptr);
+	}
+	blockSignals(false);
+	emit selectionChanged();
+}
+
+/**
+	@brief Diagram::selectNextItem
+	Select the next (or, if @a forward is false, the previous) selectable
+	item on this diagram, cycling through items() (z-order) and wrapping
+	around at either end. If nothing is currently selected, selects the
+	first (or last) item. Uses the same "what counts as a real selectable
+	diagram item" filter as invertSelection(), so the candidate list and
+	its order always match what the user could reach by clicking.
+	@param forward true to select the next item, false for the previous one
+*/
+void Diagram::selectNextItem(bool forward)
+{
+	QList<QGraphicsItem *> candidates;
+	for (auto item : items()) {
+		if (dynamic_cast<QetGraphicsItem *>(item) ||
+			dynamic_cast<DiagramTextItem *>(item) ||
+			dynamic_cast<Conductor *>(item)) {
+			candidates << item;
+		}
+	}
+	if (candidates.isEmpty())
+		return;
+
+	int current_index = -1;
+	for (int i = 0; i < candidates.size(); ++i) {
+		if (candidates.at(i) -> isSelected()) {
+			current_index = i;
+			break;
+		}
+	}
+
+	int next_index;
+	if (current_index == -1) {
+		next_index = forward ? 0 : candidates.size() - 1;
+	} else {
+		next_index = forward
+				? (current_index + 1) % candidates.size()
+				: (current_index - 1 + candidates.size()) % candidates.size();
+	}
+
+	clearSelection();
+	QGraphicsItem *next_item = candidates.at(next_index);
+	next_item -> setSelected(true);
+	next_item -> ensureVisible();
+}
+
 /**
 	@brief Diagram::insertFolioSeqHash
 	This class inserts a stringlist containing all

sources/diagram.h

@@ -136,6 +136,9 @@ class Diagram : public QGraphicsScene
 		bool m_freeze_new_elements;
 		bool m_freeze_new_conductors_;
 		QUuid m_uuid = QUuid::createUuid();
+
+		bool uuidUsedByOtherDiagram(const QUuid &uuid) const;
+		QUuid derivedUuid(const QDomElement &root, const QString &reason) const;
 	
 	// METHODS
 	protected:
@@ -150,8 +153,11 @@ class Diagram : public QGraphicsScene
 		void wheelEvent (QGraphicsSceneWheelEvent *event) override;
 		void keyPressEvent (QKeyEvent *event) override;
 		void keyReleaseEvent (QKeyEvent *) override;
+		bool event(QEvent *event) override;
+
+	private:
+		void selectNextItem(bool forward);
 
-	
 	public:
 		void correctTextPos(Element* elmt);
 		void restoreText(Element* elmt);
@@ -287,6 +293,8 @@ class Diagram : public QGraphicsScene
 		void selectAll();
 		void deselectAll();
 		void invertSelection();
+		void selectAllConductors();
+		void selectAllTextFields();
 
 	signals:
 		void showDiagram (Diagram *);