Update .TS files, and update english translation

git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@2750 bfdf4180-ca20-0410-9c96-a3a8aa849046

lang/qet_en.ts

@@ -1098,6 +1098,15 @@ Apply a text to all of these drivers?</translation>
         <translation>rectangle</translation>
     </message>
 </context>
+<context>
+    <name>ElementTextItem</name>
+    <message>
+        <location filename="../sources/qetgraphicsitem/elementtextitem.cpp" line="52"/>
+        <source>Maintenir ctrl pour déplacer</source>
+        <comment>tool tip for element text item</comment>
+        <translation>Hold ctrl to move</translation>
+    </message>
+</context>
 <context>
     <name>ElementsCategoriesWidget</name>
     <message>
@@ -1614,7 +1623,7 @@ Changes will be definitive.</translation>
 <context>
     <name>ExportConfigPage</name>
     <message>
-        <location filename="../sources/configpages.cpp" line="256"/>
+        <location filename="../sources/configpages.cpp" line="255"/>
         <source>Export</source>
         <comment>configuration page title</comment>
         <translation>Export</translation>
@@ -1623,7 +1632,7 @@ Changes will be definitive.</translation>
 <context>
     <name>ExportDialog</name>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="664"/>
+        <location filename="../sources/exportdialog.cpp" line="745"/>
         <source>Aperçu</source>
         <translation>Preview</translation>
     </message>
@@ -1633,7 +1642,7 @@ Changes will be definitive.</translation>
         <translation>Dimensions</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="546"/>
+        <location filename="../sources/exportdialog.cpp" line="627"/>
         <source>Impossible d&apos;écrire dans ce fichier</source>
         <comment>message box title</comment>
         <translation>Can not write to this file</translation>
@@ -1665,37 +1674,37 @@ Changes will be definitive.</translation>
         <translation>Filename</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="489"/>
+        <location filename="../sources/exportdialog.cpp" line="570"/>
         <source>Vous devez entrer un nom de fichier non vide et unique pour chaque schéma à exporter.</source>
         <comment>message box content</comment>
         <translation>You must enter a non-empty, unique filename for each diagram to export.</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="766"/>
-        <location filename="../sources/exportdialog.cpp" line="771"/>
+        <location filename="../sources/exportdialog.cpp" line="847"/>
+        <location filename="../sources/exportdialog.cpp" line="852"/>
         <source>px</source>
         <translation>px</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="488"/>
+        <location filename="../sources/exportdialog.cpp" line="569"/>
         <source>Noms des fichiers cibles</source>
         <comment>message box title</comment>
         <translation>Target files names</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="504"/>
+        <location filename="../sources/exportdialog.cpp" line="585"/>
         <source>Dossier non spécifié</source>
         <comment>message box title</comment>
         <translation>Directory missing</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="505"/>
+        <location filename="../sources/exportdialog.cpp" line="586"/>
         <source>Vous devez spécifier le chemin du dossier dans lequel seront enregistrés les fichiers images.</source>
         <comment>message box content</comment>
         <translation>You must specify the path of the directory in which the images files will be saved.</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="548"/>
+        <location filename="../sources/exportdialog.cpp" line="629"/>
         <source>Il semblerait que vous n&apos;ayez pas les permissions nécessaires pour écrire dans le fichier %1.</source>
         <comment>message box content</comment>
         <translation>It appears you do not have the required permissions to write the file %1.</translation>
@@ -1804,22 +1813,32 @@ Changes will be definitive.</translation>
         <translation>Report folio available:</translation>
     </message>
     <message>
-        <location filename="../sources/ui/folioreportproperties.cpp" line="54"/>
+        <location filename="../sources/ui/folioreportproperties.ui" line="82"/>
+        <source>Voir ce report</source>
+        <translation>See this report</translation>
+    </message>
+    <message utf8="true">
+        <location filename="../sources/ui/folioreportproperties.ui" line="89"/>
+        <source>Voir le report lié</source>
+        <translation>See the report.linked</translation>
+    </message>
+    <message>
+        <location filename="../sources/ui/folioreportproperties.cpp" line="58"/>
         <source>Sans titre</source>
         <translation>Untitled</translation>
     </message>
     <message>
-        <location filename="../sources/ui/folioreportproperties.cpp" line="55"/>
+        <location filename="../sources/ui/folioreportproperties.cpp" line="59"/>
         <source>Folio  %1 (%2), position %3.</source>
         <translation>Folio  %1 (%2), position %3.</translation>
     </message>
     <message>
-        <location filename="../sources/ui/folioreportproperties.cpp" line="86"/>
-        <source>Ce report est déjà lier.</source>
-        <translation>This report is already linked.</translation>
+        <location filename="../sources/ui/folioreportproperties.cpp" line="92"/>
+        <source>Ce report est déjà lié.</source>
+        <translation>This report is already.linked.</translation>
     </message>
     <message>
-        <location filename="../sources/ui/folioreportproperties.cpp" line="87"/>
+        <location filename="../sources/ui/folioreportproperties.cpp" line="93"/>
         <source>Délier</source>
         <translation>Unlink</translation>
     </message>
@@ -1827,58 +1846,58 @@ Changes will be definitive.</translation>
 <context>
     <name>GeneralConfigurationPage</name>
     <message>
-        <location filename="../sources/configpages.cpp" line="111"/>
+        <location filename="../sources/configpages.cpp" line="110"/>
         <source>Apparence</source>
         <translation>Appearance</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="112"/>
+        <location filename="../sources/configpages.cpp" line="111"/>
         <source>Utiliser les couleurs du système</source>
         <translation>Use system colors</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="114"/>
+        <location filename="../sources/configpages.cpp" line="113"/>
         <source>Projets</source>
         <translation>Projects</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="115"/>
+        <location filename="../sources/configpages.cpp" line="114"/>
         <source>Utiliser des fenêtres</source>
         <translation>Use windows</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="116"/>
+        <location filename="../sources/configpages.cpp" line="115"/>
         <source>Utiliser des onglets</source>
         <translation>Use tabs</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="117"/>
+        <location filename="../sources/configpages.cpp" line="116"/>
         <source>Ces paramètres s&apos;appliqueront dès la prochaine ouverture d&apos;un éditeur de schémas.</source>
         <translation>These settings will be applied at the next opening of a diagram editor.</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="119"/>
+        <location filename="../sources/configpages.cpp" line="118"/>
         <source>Gestion des éléments</source>
         <translation>Elements management</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="120"/>
+        <location filename="../sources/configpages.cpp" line="119"/>
         <source>Intégrer automatiquement les éléments dans les projets (recommandé)</source>
         <translation>Integrate automatically the elements into the projects (recommended)</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="121"/>
+        <location filename="../sources/configpages.cpp" line="120"/>
         <source>Mettre en valeur dans le panel les éléments fraîchement intégrés</source>
         <comment>configuration option</comment>
         <translation>Highlight freshly integrated elements in the panel</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="123"/>
+        <location filename="../sources/configpages.cpp" line="122"/>
         <source>Chaque élément embarque des informations sur ses auteurs, sa licence, ou tout autre renseignement que vous jugerez utile dans un champ libre. Vous pouvez spécifier ici la valeur par défaut de ce champ pour les éléments que vous créerez :</source>
         <translation>Element may include information about its authors, license, or other useful information. Specify the default value of this textfield for new elements below:</translation>
     </message>
     <message>
-        <location filename="../sources/configpages.cpp" line="210"/>
+        <location filename="../sources/configpages.cpp" line="209"/>
         <source>Général</source>
         <comment>configuration page title</comment>
         <translation>General</translation>
@@ -2301,7 +2320,17 @@ Changes will be definitive.</translation>
 <context>
     <name>NewDiagramPage</name>
     <message>
-        <location filename="../sources/configpages.cpp" line="93"/>
+        <location filename="../sources/configpages.cpp" line="45"/>
+        <source>Schéma</source>
+        <translation>Diagram</translation>
+    </message>
+    <message>
+        <location filename="../sources/configpages.cpp" line="50"/>
+        <source>Conducteur</source>
+        <translation>Conductor</translation>
+    </message>
+    <message>
+        <location filename="../sources/configpages.cpp" line="92"/>
         <source>Nouveau schéma</source>
         <comment>configuration page title</comment>
         <translation>New Diagram</translation>
@@ -2475,7 +2504,7 @@ Changes will be definitive.</translation>
 <context>
     <name>PrintConfigPage</name>
     <message>
-        <location filename="../sources/configpages.cpp" line="310"/>
+        <location filename="../sources/configpages.cpp" line="309"/>
         <source>Impression</source>
         <comment>configuration page title</comment>
         <translation>Printing</translation>
@@ -2484,25 +2513,25 @@ Changes will be definitive.</translation>
 <context>
     <name>ProjectMainConfigPage</name>
     <message>
-        <location filename="../sources/projectconfigpages.cpp" line="94"/>
+        <location filename="../sources/projectconfigpages.cpp" line="95"/>
         <source>Général</source>
         <comment>configuration page title</comment>
         <translation>General</translation>
     </message>
     <message>
-        <location filename="../sources/projectconfigpages.cpp" line="138"/>
+        <location filename="../sources/projectconfigpages.cpp" line="139"/>
         <source>Titre du projet :</source>
         <comment>label when configuring</comment>
         <translation>Project title:</translation>
     </message>
     <message>
-        <location filename="../sources/projectconfigpages.cpp" line="140"/>
+        <location filename="../sources/projectconfigpages.cpp" line="141"/>
         <source>Ce titre sera disponible pour tous les schémas de ce projet en tant que %projecttitle.</source>
         <comment>informative label</comment>
         <translation>This title is made available to all child diagrams as %projecttitle.</translation>
     </message>
     <message>
-        <location filename="../sources/projectconfigpages.cpp" line="142"/>
+        <location filename="../sources/projectconfigpages.cpp" line="143"/>
         <source>Vous pouvez définir ci-dessous des propriétés personnalisées qui seront disponibles pour tous les schémas de ce projet (typiquement pour les cartouches).</source>
         <comment>informative label</comment>
         <translation>You may define below custom properties that will be made available to all child diagrams (typically for use within title blocks).</translation>
@@ -2511,115 +2540,125 @@ Changes will be definitive.</translation>
 <context>
     <name>ProjectNewDiagramConfigPage</name>
     <message>
-        <location filename="../sources/projectconfigpages.cpp" line="206"/>
+        <location filename="../sources/projectconfigpages.cpp" line="207"/>
         <source>Nouveau schéma</source>
         <comment>project configuration page title</comment>
         <translation>New diagram</translation>
     </message>
     <message>
-        <location filename="../sources/projectconfigpages.cpp" line="250"/>
+        <location filename="../sources/projectconfigpages.cpp" line="257"/>
         <source>Propriétés à utiliser lors de l&apos;ajout d&apos;un nouveau schéma au projet :</source>
         <comment>explicative label</comment>
         <translation>Properties to be used when adding a new diagram to the project:</translation>
     </message>
+    <message>
+        <location filename="../sources/projectconfigpages.cpp" line="280"/>
+        <source>Schéma</source>
+        <translation>Diagram</translation>
+    </message>
+    <message>
+        <location filename="../sources/projectconfigpages.cpp" line="282"/>
+        <source>Conducteur</source>
+        <translation>Conductor</translation>
+    </message>
 </context>
 <context>
     <name>ProjectView</name>
     <message>
-        <location filename="../sources/projectview.cpp" line="633"/>
+        <location filename="../sources/projectview.cpp" line="636"/>
         <source>Supprimer les éléments inutilisés dans le projet</source>
         <translation>Delete unused elements in  the project</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="634"/>
+        <location filename="../sources/projectview.cpp" line="637"/>
         <source>Supprimer les catégories vides</source>
         <translation>Delete empty categories</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="349"/>
+        <location filename="../sources/projectview.cpp" line="352"/>
         <source>Supprimer le schéma ?</source>
         <comment>message box title</comment>
         <translation>Delete the diagram?</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="242"/>
+        <location filename="../sources/projectview.cpp" line="245"/>
         <source>Le projet à été modifié.
 Voulez-vous enregistrer les modifications ?</source>
         <translation>The project was modified.
 Do you want to save changes?</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="350"/>
+        <location filename="../sources/projectview.cpp" line="353"/>
         <source>Êtes-vous sûr de vouloir supprimer ce schéma du projet ? Ce changement est irréversible.</source>
         <comment>message box content</comment>
         <translation>Do you really want to delete this diagram from the project? This change is irreversible.</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="419"/>
+        <location filename="../sources/projectview.cpp" line="422"/>
         <source>Propriétés du projet</source>
         <comment>window title</comment>
         <translation>Project properties</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="625"/>
+        <location filename="../sources/projectview.cpp" line="628"/>
         <source>Projet en lecture seule</source>
         <comment>message box title</comment>
         <translation>Read-only project</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="626"/>
+        <location filename="../sources/projectview.cpp" line="629"/>
         <source>Ce projet est en lecture seule. Il n&apos;est donc pas possible de le nettoyer.</source>
         <comment>message box content</comment>
         <translation>This project is read-only. Thus it can not be cleaned.</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="632"/>
+        <location filename="../sources/projectview.cpp" line="635"/>
         <source>Supprimer les modèles de cartouche inutilisés dans le projet</source>
         <translation>delete unused templates in the project</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="646"/>
+        <location filename="../sources/projectview.cpp" line="649"/>
         <source>Nettoyer le projet</source>
         <comment>window title</comment>
         <translation>Clean project</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="266"/>
+        <location filename="../sources/projectview.cpp" line="269"/>
         <source>Enregistrer sous</source>
         <comment>dialog title</comment>
         <translation>Save as</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="268"/>
+        <location filename="../sources/projectview.cpp" line="271"/>
         <source>Schéma QElectroTech (*.qet)</source>
         <comment>filetypes allowed when saving a diagram file</comment>
         <translation>QElectroTech Diagram (*.qet)</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="290"/>
+        <location filename="../sources/projectview.cpp" line="293"/>
         <source>aucun projet affiché</source>
         <comment>error message</comment>
         <translation>no active project</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="682"/>
+        <location filename="../sources/projectview.cpp" line="685"/>
         <source>Ajouter un schéma</source>
         <translation>Add a diagram</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="696"/>
+        <location filename="../sources/projectview.cpp" line="699"/>
         <source>Ce projet ne contient aucun schéma</source>
         <comment>label displayed when a project contains no diagram</comment>
         <translation>This project does not contain any diagram</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="762"/>
+        <location filename="../sources/projectview.cpp" line="765"/>
         <source>Projet</source>
         <comment>window title for a project-less ProjectView</comment>
         <translation>Project</translation>
     </message>
     <message>
-        <location filename="../sources/projectview.cpp" line="506"/>
+        <location filename="../sources/projectview.cpp" line="509"/>
         <source>projet</source>
         <comment>string used to generate a filename</comment>
         <translation>project</translation>
@@ -3048,7 +3087,7 @@ Available options:
         <translation>&amp;Open</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="676"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="677"/>
         <source>Ouvrir un fichier</source>
         <translation>Open a file</translation>
     </message>
@@ -3068,7 +3107,7 @@ Available options:
         <translation>&amp;Quit</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="678"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="679"/>
         <source>Schémas QElectroTech (*.qet);;Fichiers XML (*.xml);;Tous les fichiers (*)</source>
         <translation>QElectroTech Diagrams (*.qet);;XML Files (*.xml);;All files (*)</translation>
     </message>
@@ -3244,12 +3283,12 @@ Available options:
         <translation>&amp;Project</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="779"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="780"/>
         <source>Il semblerait que le fichier que vous essayez d&apos;ouvrir ne soit pas accessible en lecture. Il est donc impossible de l&apos;ouvrir. Veuillez vérifier les permissions du fichier.</source>
         <translation>The file you try to open does not seem readable and can not be opened. Please check the file permissions.</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="793"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="794"/>
         <source>Il semblerait que le projet que vous essayez d&apos;ouvrir ne soit pas accessible en écriture. Il sera donc ouvert en lecture seule.</source>
         <translation>The project you try to open does not seem writable. It will be opened read-only.</translation>
     </message>
@@ -3279,13 +3318,13 @@ Available options:
         <translation>Clean project</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="806"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="807"/>
         <source>Échec de l&apos;ouverture du projet</source>
         <comment>message box title</comment>
         <translation>Unable to open project</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="808"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="809"/>
         <source>Il semblerait que le fichier %1 ne soit pas un fichier projet QElectroTech. Il ne peut donc être ouvert.</source>
         <comment>message box content</comment>
         <translation>The file %1 does not appear to be a QElectroTech project file. Thus it cannot be opened.</translation>
@@ -3584,64 +3623,64 @@ Available options:
         <translation>Allows to view the diagram without modifying it</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="763"/>
-        <location filename="../sources/qetdiagrameditor.cpp" line="778"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="764"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="779"/>
         <source>Impossible d&apos;ouvrir le fichier</source>
         <comment>message box title</comment>
         <translation>Unable to open file</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="765"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="766"/>
         <source>Il semblerait que le fichier %1 que vous essayez d&apos;ouvrir n&apos;existe pas ou plus.</source>
         <translation>It appears the %1 file which you are trying to open does not exist or does not exist anymore.</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="792"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="793"/>
         <source>Ouverture du projet en lecture seule</source>
         <comment>message box title</comment>
         <translation>Opening the file read-only</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="1218"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="1219"/>
         <source>Éditer l&apos;élement</source>
         <comment>edit element</comment>
         <translation>Edit the element</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="1223"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="1224"/>
         <source>Éditer le champ de texte</source>
         <comment>edit text field</comment>
         <translation>Edit the text field</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="1228"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="1229"/>
         <source>Éditer l&apos;image</source>
         <comment>edit image</comment>
         <translation>Edit the image</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="1234"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="1235"/>
         <source>Éditer l&apos;objet sélectionné</source>
         <comment>edit selected item</comment>
         <translation>Edit the selected object</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="1844"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="1847"/>
         <source>Impossible de retrouver cet élément dans le panel car il semble édité dans une autre fenêtre</source>
         <translation>Unable to find this element in the panel because it seems to be edited from another window</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="1850"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="1853"/>
         <source>Impossible de retrouver cet élément dans le panel... rechargement du panel...</source>
         <translation>Unable to find this element in the panel... reloading the panel...</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="1862"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="1865"/>
         <source>Impossible de retrouver cet élément dans le panel</source>
         <translation>Unable to find this element in the panel</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="1909"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="1912"/>
         <source>Erreur</source>
         <comment>message box title</comment>
         <translation>Error</translation>
@@ -3681,7 +3720,7 @@ Available options:
         <translation>Activates the previous project</translation>
     </message>
     <message>
-        <location filename="../sources/qetdiagrameditor.cpp" line="1408"/>
+        <location filename="../sources/qetdiagrameditor.cpp" line="1411"/>
         <source>Active le projet « %1 »</source>
         <translation>Activates the project &quot;%1&quot;</translation>
     </message>
@@ -4505,34 +4544,34 @@ Available options:
 <context>
     <name>QETProject</name>
     <message>
-        <location filename="../sources/qetproject.cpp" line="626"/>
+        <location filename="../sources/qetproject.cpp" line="635"/>
         <source>Impossible de créer la catégorie pour l&apos;intégration des éléments</source>
         <translation>Unable to create the category dedicated to the elements integration</translation>
     </message>
     <message>
-        <location filename="../sources/qetproject.cpp" line="654"/>
+        <location filename="../sources/qetproject.cpp" line="663"/>
         <source>Un problème s&apos;est produit pendant la copie de la catégorie %1</source>
         <translation>An error occured during the copy of the category %1</translation>
     </message>
     <message>
-        <location filename="../sources/qetproject.cpp" line="921"/>
+        <location filename="../sources/qetproject.cpp" line="930"/>
         <source>Ce document semble avoir été enregistré avec une version ultérieure de QElectroTech. Il est possible que l&apos;ouverture de tout ou partie de ce document échoue.
 Que désirez vous faire ?</source>
         <comment>message box content</comment>
         <translation>This document appears to have been saved wit h a newer version of QElectroTech. All or a part of its opening may fail. What do you wish to do?</translation>
     </message>
     <message>
-        <location filename="../sources/qetproject.cpp" line="975"/>
+        <location filename="../sources/qetproject.cpp" line="984"/>
         <source>&lt;b&gt;Ouverture du projet en cours...&lt;/b&gt;</source>
         <translation>&lt;b&gt; Opening project ... &lt;/ b&gt;</translation>
     </message>
     <message>
-        <location filename="../sources/qetproject.cpp" line="1343"/>
+        <location filename="../sources/qetproject.cpp" line="1361"/>
         <source>Un problème s&apos;est produit pendant la copie de l&apos;élément %1</source>
         <translation>An error occured during the copy of the element %1</translation>
     </message>
     <message>
-        <location filename="../sources/qetproject.cpp" line="920"/>
+        <location filename="../sources/qetproject.cpp" line="929"/>
         <source>Avertissement</source>
         <comment>message box title</comment>
         <translation>Warning</translation>
@@ -4568,12 +4607,12 @@ Que désirez vous faire ?</source>
         <translation>%1 [modified]</translation>
     </message>
     <message>
-        <location filename="../sources/qetproject.cpp" line="637"/>
+        <location filename="../sources/qetproject.cpp" line="646"/>
         <source>Impossible d&apos;accéder à l&apos;élément à intégrer</source>
         <translation>Unable to reach the element to be integrated</translation>
     </message>
     <message>
-        <location filename="../sources/qetproject.cpp" line="728"/>
+        <location filename="../sources/qetproject.cpp" line="737"/>
         <source>Une erreur s&apos;est produite durant l&apos;intégration du modèle.</source>
         <comment>error message</comment>
         <translation>An error occured during the template integration.</translation>
@@ -4937,22 +4976,22 @@ Que désirez vous faire ?</source>
 <context>
     <name>QObject</name>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="792"/>
+        <location filename="../sources/exportdialog.cpp" line="873"/>
         <source>Exporter vers le presse-papier</source>
         <translation>Export to clipboard</translation>
     </message>
     <message>
-        <location filename="../sources/qet.cpp" line="322"/>
+        <location filename="../sources/qet.cpp" line="323"/>
         <source>Le fichier texte contenant la licence GNU/GPL est introuvable - bon bah de toute façon, vous la connaissez par coeur non ?</source>
         <translation>The text file containing the GNU/GPL license could not be found - however, you know it by heart, don&apos;t you?</translation>
     </message>
     <message>
-        <location filename="../sources/qet.cpp" line="326"/>
+        <location filename="../sources/qet.cpp" line="327"/>
         <source>Le fichier texte contenant la licence GNU/GPL existe mais n&apos;a pas pu être ouvert - bon bah de toute façon, vous la connaissez par coeur non ?</source>
         <translation>The text file containing the GNU/GPL license exists but could not be opened - however, you know it by heart, don&apos;t you?</translation>
     </message>
     <message>
-        <location filename="../sources/qetgraphicsitem/customelement.cpp" line="112"/>
+        <location filename="../sources/qetgraphicsitem/customelement.cpp" line="119"/>
         <source>Avertissement : l&apos;élément  a été enregistré avec une version ultérieure de QElectroTech.</source>
         <translation>Warning: the element has been saved with a more recent version of QElectroTech.</translation>
     </message>
@@ -5019,70 +5058,70 @@ Que désirez vous faire ?</source>
         <translation>rotate %1</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="784"/>
+        <location filename="../sources/diagramcommands.cpp" line="785"/>
         <source>orienter %1 à %2°</source>
         <comment>undo caption - %1 looks like &apos;42 texts&apos;, %2 is a rotation angle</comment>
         <translation>Rotate %1 to %2°</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="808"/>
+        <location filename="../sources/diagramcommands.cpp" line="809"/>
         <source>modifier un conducteur</source>
         <comment>undo caption</comment>
         <translation>modify a conductor</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="865"/>
+        <location filename="../sources/diagramcommands.cpp" line="866"/>
         <source>Réinitialiser %1</source>
         <comment>undo caption - %1 is a sentence listing the reset content</comment>
         <translation>Reset %1</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="905"/>
+        <location filename="../sources/diagramcommands.cpp" line="906"/>
         <source>modifier le cartouche</source>
         <comment>undo caption</comment>
         <translation>modify the inset</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="938"/>
+        <location filename="../sources/diagramcommands.cpp" line="939"/>
         <source>modifier les dimensions du schéma</source>
         <comment>undo caption</comment>
         <translation>modify the diagram size</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="967"/>
+        <location filename="../sources/diagramcommands.cpp" line="968"/>
         <source>modifier les propriétés d&apos;un conducteur</source>
         <comment>undo caption</comment>
         <translation>modify conductor properties</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="1021"/>
+        <location filename="../sources/diagramcommands.cpp" line="1022"/>
         <source>modifier les propriétés de plusieurs conducteurs</source>
         <comment>undo caption</comment>
         <translation>Modify the properties of multiple conductors </translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="1133"/>
+        <location filename="../sources/diagramcommands.cpp" line="1134"/>
         <source>Agrandire une image à %1 %</source>
         <translation>Enlarge an image.%1.%</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="1134"/>
+        <location filename="../sources/diagramcommands.cpp" line="1135"/>
         <source>Réduire une image à %1 %</source>
         <translation>Reduce the image to.%1.%</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="1154"/>
+        <location filename="../sources/diagramcommands.cpp" line="1155"/>
         <source>Lier deux reports de folio</source>
         <comment>title for undo LinkElementsCommand if two elements are folio report</comment>
         <translation>Link two reports of folio</translation>
     </message>
     <message>
-        <location filename="../sources/diagramcommands.cpp" line="1159"/>
+        <location filename="../sources/diagramcommands.cpp" line="1160"/>
         <source>Lier deux éléments</source>
         <translation>Link two elements</translation>
     </message>
     <message numerus="yes">
-        <location filename="../sources/diagramcommands.cpp" line="1202"/>
+        <location filename="../sources/diagramcommands.cpp" line="1203"/>
         <source>Délier %n élément(s)</source>
         <translation>
             <numerusform>Unlink.%n element</numerusform>
@@ -5222,7 +5261,7 @@ Que désirez vous faire ?</source>
         <translation>textfield</translation>
     </message>
     <message numerus="yes">
-        <location filename="../sources/qet.cpp" line="206"/>
+        <location filename="../sources/qet.cpp" line="207"/>
         <source>%n élément(s)</source>
         <comment>part of a sentence listing the content of a diagram</comment>
         <translation>
@@ -5231,20 +5270,20 @@ Que désirez vous faire ?</source>
         </translation>
     </message>
     <message>
-        <location filename="../sources/qet.cpp" line="214"/>
-        <location filename="../sources/qet.cpp" line="235"/>
+        <location filename="../sources/qet.cpp" line="215"/>
+        <location filename="../sources/qet.cpp" line="236"/>
         <source>, </source>
         <comment>separator between elements and conductors in a sentence listing the content of a diagram</comment>
         <translation>, </translation>
     </message>
     <message>
-        <location filename="../sources/qet.cpp" line="220"/>
+        <location filename="../sources/qet.cpp" line="221"/>
         <source> et </source>
         <comment>separator between elements and conductors (or texts) in a sentence listing the content of a diagram</comment>
         <translation> and </translation>
     </message>
     <message numerus="yes">
-        <location filename="../sources/qet.cpp" line="229"/>
+        <location filename="../sources/qet.cpp" line="230"/>
         <source>%n conducteur(s)</source>
         <comment>part of a sentence listing the content of a diagram</comment>
         <translation>
@@ -5253,14 +5292,14 @@ Que désirez vous faire ?</source>
         </translation>
     </message>
     <message>
-        <location filename="../sources/qet.cpp" line="242"/>
-        <location filename="../sources/qet.cpp" line="257"/>
+        <location filename="../sources/qet.cpp" line="243"/>
+        <location filename="../sources/qet.cpp" line="258"/>
         <source> et </source>
         <comment>separator between conductors and texts in a sentence listing the content of a diagram</comment>
         <translation> and </translation>
     </message>
     <message numerus="yes">
-        <location filename="../sources/qet.cpp" line="251"/>
+        <location filename="../sources/qet.cpp" line="252"/>
         <source>%n champ(s) de texte</source>
         <comment>part of a sentence listing the content of a diagram</comment>
         <translation>
@@ -5269,7 +5308,7 @@ Que désirez vous faire ?</source>
         </translation>
     </message>
     <message numerus="yes">
-        <location filename="../sources/qet.cpp" line="266"/>
+        <location filename="../sources/qet.cpp" line="267"/>
         <source>%n image(s)</source>
         <comment>part of a sentence listing the content of a diagram</comment>
         <translation>
@@ -5278,7 +5317,7 @@ Que désirez vous faire ?</source>
         </translation>
     </message>
     <message>
-        <location filename="../sources/qet.cpp" line="604"/>
+        <location filename="../sources/qet.cpp" line="605"/>
         <source>Impossible d&apos;ouvrir le fichier %1 en écriture, erreur %2 rencontrée.</source>
         <comment>error message when attempting to write an XML file</comment>
         <translation>Unable to open file %1 with write access, encountered error %2.</translation>
@@ -5307,27 +5346,27 @@ Que désirez vous faire ?</source>
         <translation>rectangle</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="753"/>
+        <location filename="../sources/exportdialog.cpp" line="834"/>
         <source>Schéma sans titre</source>
         <translation>Untitled diagram</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="755"/>
+        <location filename="../sources/exportdialog.cpp" line="836"/>
         <source>schema</source>
         <translation>diagram</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="780"/>
+        <location filename="../sources/exportdialog.cpp" line="861"/>
         <source>Conserver les proportions</source>
         <translation>Keep aspect ratio</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="784"/>
+        <location filename="../sources/exportdialog.cpp" line="865"/>
         <source>Réinitialiser les dimensions</source>
         <translation>Reset size</translation>
     </message>
     <message>
-        <location filename="../sources/exportdialog.cpp" line="788"/>
+        <location filename="../sources/exportdialog.cpp" line="869"/>
         <source>Aperçu</source>
         <translation>Preview</translation>
     </message>
@@ -5542,6 +5581,32 @@ Que désirez vous faire ?</source>
         <translation>height</translation>
     </message>
 </context>
+<context>
+    <name>ReportPropertieWidget</name>
+    <message>
+        <location filename="../sources/ui/reportpropertiewidget.ui" line="14"/>
+        <source>Form</source>
+        <translation>Form</translation>
+    </message>
+    <message>
+        <location filename="../sources/ui/reportpropertiewidget.ui" line="20"/>
+        <source>Label de report de folio</source>
+        <translation>Label of report folio</translation>
+    </message>
+    <message utf8="true">
+        <location filename="../sources/ui/reportpropertiewidget.ui" line="35"/>
+        <source>Vous pouvez définir un label personnalisé pour les reports de folio.
+Créer votre propre texte en vous aidant des variables suivantes :
+%f : le numéro de folio 
+%l : le numéro de ligne
+%c : le numéro de colonne</source>
+        <translation>You can define a custom label for reports of folio.
+Create your own text, using the following variables.:
+%f : the number of folio
+%l :.line number
+%c :the column number</translation>
+    </message>
+</context>
 <context>
     <name>SelectAutonumW</name>
     <message>