In the terminal strip manager, after a free terminal was moved into a
strip, clicking another free terminal showed nothing on the right. It
only came back after selecting a strip first.
The tree remembers whether a free terminal is selected and only tells
the window to update when that, or the selected strip, changes. Moving
a terminal rebuilds the tree, which clears the selection and shows the
empty page, but the "free terminal selected" flag stayed true. The next
click on a free terminal then looked like no change and was ignored.
The flag is now reset when the selection is cleared, and updated on
every change it takes part in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- setTextWidth() returns without a signal when the width does not
change, which is also the case on every load of a text without one.
- Say why IndependentTextItem::textWidth()/setTextWidth() hide the
non-virtual QGraphicsTextItem functions, and what that means for code
holding a base pointer.
- The fixture no longer carries a /tmp path from the machine it was
made on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The independent_text table had the text and rotation of a free text but
not its width, and a width change did not update the row at all -- not
even its width and height, which follow the wrapped text. Add a
text_width column (NULL for the automatic width) and update the row on
textWidthChanged.
Test: tst_scriptfreetextwidth reads the table with qet.query() (fails
before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A scene drops the event filters of an item that leaves it. The handles
installed theirs once, in the constructor, and only if the text was in
a scene: after the text was removed and added back (undoing a delete
does that), or when the handles were made before the text was in a
scene, they no longer reacted, and a drag moved the text instead.
TextResizeHandles now installs the filters again whenever it enters a
scene.
Tests: dragAfterLeavingTheScene, dragWhenCreatedOutsideAScene (both
fail before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TextResizeHandles puts four handles at the corners of a selected text
(any QGraphicsTextItem with a qreal "textWidth" property, -1 = automatic
width). Dragging one changes the width: the opposite corner stays in
place in scene coordinates, for any rotation and rotation point, the
text wraps and the height follows it. Vertical mouse movements are
ignored, the width never goes below the longest word and is rounded to
whole pixels, and a click without a move changes nothing.
Double-clicking a handle goes back to the automatic width.
The handles are a child of the text, so they follow it when it moves,
rotates or is zoomed (as for the symbol text handles, #1002). The width
is changed live; the owner makes it undoable with TextResizeCommand,
which sets the width then the position on both undo and redo -- a text
may move itself when its width changes, so two property commands would
restore them in the wrong order.
The geometry is header-only (textresize.h). Nothing uses the handles
yet: the follow-up changes add them to free texts and to text fields in
the element editor.
Test: tst_textresizehandles, on a plain QGraphicsTextItem.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A free text (IndependentTextItem) gets a textWidth property: -1 is the
automatic width (one line, or lines broken by hand, as today); a
positive width makes the text wrap between words. Its top-left corner
stays in place. The property is what a spin box and resize handles will
set in follow-up changes.
File format: the width is saved as text_width on <input>, only when one
is set, so a project without widths is saved byte-identical
(tst_resaveunchanged). An older QElectroTech ignores the attribute and
shows the text on one line, with no load error.
DiagramTextItem::setHtml() no longer widens a centred or right-aligned
rich text to idealWidth() + 40 when the text has a width of its own;
with the automatic width it still does.
Test: tst_freetextwidth (--resave keeps the width only where set,
--export-svg draws the text wrapped).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The previous commit passed -extra-plugins to macdeployqt, which does
not know it: it aborted with "Unknown argument" and deployed nothing,
so the following steps failed on an empty Frameworks/ directory.
Call macdeployqt without options and stop the script if it fails. The
offscreen plugin is copied by the existing fallback block.
macdeployqt only deploys libqcocoa, so running QElectroTech with
QT_QPA_PLATFORM=offscreen aborts on the signed macOS bundle. This
prevents headless use (e.g. qet_mcp.py) without opening a Cocoa app.
Deploy platforms/libqoffscreen.dylib with macdeployqt -extra-plugins.
If it is not deployed, copy it from the Homebrew Qt and point its Qt
framework references to the bundle. The build stops if the plugin is
still missing. The existing signing loops already sign it with the
other plugins.
- replaceImage(), mirror() and setTransparentColor() no longer add a
dummy QUndoCommand child: the imageSource child already keeps
QPropertyUndoCommand::mergeWith() from merging two of them.
- The explanation of the position and pivot maths moves from crop() to
applyCrop(), where that code now lives; the stale older doc block of
crop() goes.
- applyCrop() returns false when nothing was cropped, and
qet.cropImage() passes that on. tst_imagecropundo checks it for the
current crop, an empty rectangle and one outside the picture.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Slave contacts, Leave out junctions and its tooltip; the locations of the
entries after them in the two .ui files moved down accordingly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since #849 the parts list has a row for every contact block (slave) and
terminal-type element. Users who draw the dots and bends where wires
branch as terminal-type symbols (114_connections) get one empty row per
junction: 109 of 151 rows on one reported cabinet.
Two options, both off by default so existing exports are unchanged:
- leave out the contact blocks: --no-slaves, "no_slaves" in qet_export,
or uncheck the new "Contacts esclaves" element type in the dialog;
- leave out the junctions: terminal-type elements with no label,
designation, manufacturer or manufacturer reference. --no-junctions,
"no_junctions", or "Laisser de côté les jonctions" in the dialog.
A terminal block with a label or a part number stays.
The element type filter had no box for slaves, so every query it built
left them out: the export dialog never listed contact blocks, although
the command line has since #849. The dialog now checks the new box by
default and gives the same rows as --export-bom. The box is unchecked by
default elsewhere, so nomenclature tables keep their rows.
docs/smart-device-bom.md still said slaves and terminals were excluded;
corrected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rewriting the links copied the old trailer up to %%EOF, so the old
startxref stayed in the file before the new one. Its offset is the size
the file had before the rewrite, and the links carry the output path,
so the same project exported to two folders gave different bytes, and
a different document id. Both rewrites now copy the trailer dictionary
only, through one helper; the print window's rewrite no longer leaves a
stray %%EOF either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
qet.setHouseStyle() only saved the setting, so an assistant reading
qet-assistant.json saw the old text until QElectroTech restarted.
AssistantInfo::refresh() writes the file again, but only in a
QElectroTech that writes it at all: a headless --run would otherwise
replace the open QElectroTech's live channel with its own empty one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
QetSettings::houseStyle()/setHouseStyle() (assistant/house_style),
qet.houseStyle()/qet.setHouseStyle() in the script API, a house_style
field in qet-assistant.json, and qet_about in the qet MCP server
showing it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
At the printer's own resolution (600-1200 dpi) symbols and texts were
replayed many times too big next to the wires and grid. Seen on a test
print to PDF; the same page now matches qet_export's PDF.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
QElectroTech (LiveServer):
- print: folios to the default (or a named) printer with no print dialog,
always after asking the user (paper cannot be undone); or to a new PDF
file. Rendered as the PDF export draws a folio (no grid, no terminals).
- save_project (own file, or save as a new file, never over one) and
close_project (only without unsaved changes: never discards work).
- changes: the undo history, each step marked assistant or user, with
"since" to ask what changed after a point.
- snapshot: a copy of the open project as on screen, for a check to read,
without saving it or changing its file.
- qet.elementTextGeometry(): where a symbol's text is drawn on the folio.
qet MCP server:
- qet_live_print, qet_live_save_project, qet_live_close_project,
qet_live_changes, qet_live_layout_check (snapshot + qet_layout_check, no
"run this script?" window); write paths never overwrite.
- Layout rules from the house style, for file and live checks alike:
label_on_wire, four_way_junction, misaligned_branch.
- The element index is saved under ~/.cache/qet-mcp: a new server process
loads 8839 symbols in 0.4 s instead of parsing them for 6.9 s; the
change check is a third faster.
- qet_about lists the installation's standard symbols
(standard-symbols.json in QElectroTech's data folder) when there are any.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
openAndAddProject() asked "Créer une copie de sauvegarde ?" even when
called non-interactively, so open_project waited for an answer from the
user in front of the window. Only live mode opens projects that way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Live mode asked at every start (the "Mode direct" warning) and forgot
"always" for scripts when QElectroTech closed, so a user who works
with an assistant every day re-enabled it every day. Both are now
opt-in and remembered: the warning has a "Ne plus demander au
démarrage" checkbox (scripting/live_skip_warning), and the ask-first
choice is saved (scripting/live_ask_first; the Assistant panel's
checkbox and "Toujours" in the script window). The status bar still
shows live mode whenever it is open. Switching live mode off in the
settings clears "don't ask again", so turning it back on warns again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
open_project opens a .qet and makes it current, as File > Open does but
with no file dialog and no error windows: a missing, unreadable or
foreign file is refused in the answer. A project already open is only
made current. switch_project makes another open project current, by its
index or its file. status now lists every open project (index, title,
file, folios, unsaved changes, current), so the assistant sees what it
can switch to. MCP: qet_live_open_project, qet_live_switch_project; both
paths go through the workspace policy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An assistant in live mode could only work on the project already open.
new_project makes one as File > New does -- this installation's
new-folio defaults, optional title and number of folios -- and makes it
the current project, so the next request works on it. An optional
absolute path saves it at once, never over an existing file: QElectroTech
refuses, and the MCP server refuses before asking (a new never-overwrite
class in its path policy, so an "overwrite" flag cannot get round it).
Pages and links across pages already worked through scripts
(qet.addFolio, setFolioTitle, linkElements across folios); the tool's
description now says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A request with "timing": true gets queue, confirm and exec times in its
answer; with QET_LIVE_PERF_LOG set, QElectroTech also appends one JSON
line per request, with the time until the folio is next painted. The
qet MCP server logs its side of each live call to the same file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The stacking added in #1287 tested the crosses' bounding rects, so
crosses whose frames or empty margins touched were raised although no
text was hidden (the list display case found in review). The texts each
cross really draws are now recorded while its geometry is built, and a
cross is raised only when one of its texts would be drawn over a text of
another one.
A new "Empiler les références dont les textes se chevauchent" checkbox
in the cross reference properties, per type, turns the stacking off;
the crosses of that type are then only centred, as before #1287. It is
saved in the project (xref attribute "stackoverlapping") and in the
settings, and is on when absent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Crop a picture as the crop tool does, in one undo step, and read its
crop rectangle back. tst_imagecropundo uses them on the real binary:
a crop that was undone is not saved, and redoing it saves it again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cropping, keying out a colour, mirroring and replacing a picture set
its crop rectangle, transparent colours and original directly and put
only the displayed pixmap into the undo command. After Ctrl+Z the
picture looked right, but a save still wrote the undone crop and
colours, and the picture came back cropped once reopened; a later
crop or colour dialog also started from the undone values. The three
are now one property, imageSource, changed in the same undo step as
the pixmap.
The crop itself moves out of the dialog into applyCrop(), so that it
can be applied without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The qet theme now lists Nuri's app icon PNGs under the name
qelectrotech, and the wizard loads its logo by that name instead of
the 256 px file path. The files stay in ico/breeze-icons/, where the
packaging scripts install them from.
Part of #1269.
Laurent Trinques