chore : Add message box for advise use hpdi round factor is unsafe

Add a message box to advise user that use a hdpi round factor can cause strange render according to : 1 - the selected value 2 - the dpi of the screen 3 - Edit the project on another computer and/or screen who don't have the same parameters as point 1 and 2.
re-add deleted paragraph and sort language entries alphabetically
2026-02-01 00:49:58 +01:00 · 2025-11-14 21:23:29 +01:00 · 2025-11-04 21:17:23 +01:00 · 2025-11-04 15:06:07 +01:00 · 2025-10-31 10:04:18 +01:00 · 2025-10-30 18:26:03 +01:00
39 changed files with 2658 additions and 2546 deletions
--- a/30
+++ b/30
@@ -1,3 +1,33 @@
+[ca]
+Gràcies a Qt Software per la biblioteca Qt ( http://www.qtsoftware.com/ ), amb llicència GNU/GPL.
+Gràcies al projecte KDE ( http://www.kde.org/ ).
+Gràcies a Loic per les seves explicacions d'ordre matemàtic.
+Gràcies a Remi Collet pels paquets Fedora.
+Gràcies a Laurent Trinques pels paquets Debian.
+Gràcies a `trem' pels paquets Mandriva.
+Gràcies a TuxFamily ( http://tuxfamily.org/ ) per a l'allotjament del projecte.
+Gràcies a `Nishiki' pels seus elements i el seu suport suport.
+Gràcies a qtcentre.org per la seva classe SingleApplication.
+Gràcies a Alfredo Carreto per les seves traduccions i correccions al castellà ( http://electronicosmx.net )
+Gràcies a 'Dr.Slump' et Sivio pour leurs traductions a l'italià
+Gràcies a Jose Carlos Martins per les seves traduccions al portuguès
+Gràcies a Pavel Fric per les seves traduccions al txec
+Gràcies a Pawel Smiech per les seves traduccions al polonès
+Gràcies a Yuriy Litkevich per les seves traduccions al rus
+Gràcies a Youssef Ouamalkran i Antoni Mirabete per les seves traduccions al català
+Gràcies a Gabi Mandoc per les seves traduccions al romanès
+Gràcies a Markus Budde i Jonas Stein et Noah Braden per les seves traduccions a l'alemany
+Gràcies a Mohamed Souabni per les seves traduccions a l'àrab
+Gràcies a Uroš Platiše per les seves traduccions a l'eslovè
+Gràcies a Antun Marakovic per les seves traduccions al croat
+Gràcies a Nikos Papadopoylos && Yannis Gyftomitros per les seves traduccions al grec
+Gràcies a Markos Chandras pels paquets Gentoo
+Gràcies a David pels paquets Slackware
+Gràcies a Chipsterjulien pels paquets  Archlinux AUR
+Gràcies a Elbert de NL pels paquets  OS/2
+Gràcies a Zloidemon pels paquets  (port GCC)
+Gràcies a Mrbit per ebuild els paquets Gentoo
+
 [en]
 Thanks to Qt Software for their Qt library ( http://www.qtsoftware.com/ ), licensed under GNU/GPL.
 Thanks to the KDE project ( http://www.kde.org/ ).
--- a/ELEMENTS.LICENSE
+++ b/ELEMENTS.LICENSE
@@ -163,6 +163,7 @@ http://creativecommons.org/licenses/by/3.0/ ή στείλτε μια επιστ
 Commons, 171 Second Street, Suite 300, San Francisco, California, 94105, USA.

 [nl]
+
 De elementen collectie voorzien, samen met QElectroTech wordt geleverd als en
 zonder enige garantie van geschiktheid voor uw doel of werk.
 Het gebruik, de wijziging en de integratie van de elementen in elektrische
@@ -177,7 +178,8 @@ http://creativecommons.org/licenses/by/3.0/ of stuur een brief naar Creative
 Commons, 171 Second Street, Suite 300, San Francisco, California, 94105, USA.

 [be]
-De elementen collectie welke samen met QElectroTech wordt geleverd zonder enige garantie
+
+De elementen collectie welke samen met QElectroTech wordt geleverd zonder enige garantie 
 of deze geschikt zijn voor uw doel of de werking.
 Het gebruik, wijzigen en integratie van de elementen in uw elektrische
 schema's wordt toegestaan zonder enige voorwaarden, ongeacht wat de uiteindelijke
--- a/22
+++ b/22
@@ -1,3 +1,14 @@
+[ca]
+Dependències:
+libQt5 (paquets libqt5*)
+cupsys-bsd per imprimir
+
+Com compilar:
+$ qmake (qmake-qt5 pels sistemes basats en Debian)
+$ make
+# umask 0022
+# make install
+
 [en]
 Requirements :
 libQt5 (see packages libqt5*)
@@ -64,17 +75,6 @@ $ make
 # umask 0022
 # make install

-[ca]
-Dependències:
-libQt5 (paquets libqt5*)
-cupsys-bsd per imprimir
-
-Com compilar:
-$ qmake (qmake-qt5 pels sistemes basats en Debian)
-$ make
-# umask 0022
-# make install
-
 [cs]
 Požadavky :
 libQt5 (viz balíček libqt5*)
--- a/4
+++ b/4
@@ -1,3 +1,7 @@
+[ca]
+QElectroTech és una aplicació Qt5 per crear esquemes elèctrics.
+QET utilitza el format XML per als seus elements i esquemes i inclou un editor d'esquemes, un editor d'elements i un editor de caixetins.
+
 [en]
 QElectroTech is a Qt5 application to design electric diagrams.
 It uses XML files for elements and diagrams, and includes both a diagram editor, a element editor, and an titleblock editor.
--- a/build-aux/linux/fedora/README.elements
+++ b/build-aux/linux/fedora/README.elements
@@ -1,3 +1,6 @@
+[ca]
+Col·lecció d'elements per a QElectroTech.
+
 [fr]
 Collection d'éléments pour QElectroTech.

@@ -10,6 +13,7 @@ Bauteilsammlung für QElectroTech.
 [es]
 Collección de elementos para QElectroTech.

+
 [pt]
 Colecção de elementos para QElectroTech.

--- a/2
+++ b/2
--- a/fonts/osifont.ttf
+++ b/fonts/osifont.ttf
--- a/lang/qet_ca.qm
+++ b/lang/qet_ca.qm
--- a/lang/qet_ca.ts
+++ b/lang/qet_ca.ts
--- a/man/files/ca/man1/qelectrotech.1.gz
+++ b/man/files/ca/man1/qelectrotech.1.gz
--- a/misc/org.qelectrotech.qelectrotech.desktop
+++ b/misc/org.qelectrotech.qelectrotech.desktop
@@ -12,7 +12,7 @@ Keywords=Graphics;Science;Electricity;Engineering;
 Comment=Edit electrical diagrams.
 Comment[ar]=تحرير مخططات كهربائية
 Comment[be]=Bewerken elektrisch schema.
-Comment[ca]=Editar esquemes elèctrics.
+Comment[ca]=Edita esquemes elèctrics.
 Comment[cs]=Editor výkresů elektrických obvodů
 Comment[da]=Rediger elektriske diagrammer.
 Comment[de]=Elektroschaltpläne erstellen und bearbeiten.
@@ -30,6 +30,7 @@ Comment[sk]=Úprava elektrických schém.
 GenericName=Electrical diagram editor
 GenericName[ar]=مُحرّر مخططات كهربائية
 GenericName[be]=Elektrische schema editor
+GenericName[ca]=Editor d'esquemes elèctrics
 GenericName[cs]=Editor výkresů elektrických obvodů
 GenericName[da]=Elektrisk diagram redigering
 GenericName[de]=Schaltplaneditor
--- a/misc/qelectrotech.appdata.xml
+++ b/misc/qelectrotech.appdata.xml
@@ -7,20 +7,21 @@
 <name>QElectroTech</name>
 <summary>Electrical diagram editor</summary>
 <summary xml:lang="ar">مُحرّر مخططات كهربائية</summary>
+ <summary xml:lang="be">Elektrische schema editor</summary>
+ <summary xml:lang="ca">Editor d'esquemes elèctrics</summary>
 <summary xml:lang="cs">Editor výkresů elektrických obvodů</summary>
+ <summary xml:lang="da">Elektrisk diagram redigering</summary>
 <summary xml:lang="de">Zeichenprogramm für Schaltpläne</summary>
 <summary xml:lang="el">Επεξεργαστής ηλεκτρικών διαγραμμάτων</summary>
 <summary xml:lang="ex">Editor de esquemas eléctricos</summary>
 <summary xml:lang="fr">Éditeur de schémas électriques</summary>
 <summary xml:lang="hr">Editor elektro sheme</summary>
 <summary xml:lang="it">Programma per disegnare schemi elettrici</summary>
+ <summary xml:lang="ja">電気回路図エディタ</summary>
+ <summary xml:lang="nl">Elektrische schema bewerker</summary>
 <summary xml:lang="pl">Edytor schematów elektrycznych</summary>
 <summary xml:lang="pt">Editor de esquemas eléctricos</summary>
 <summary xml:lang="ru">Редактор электрических схем</summary>
- <summary xml:lang="nl">Elektrische schema bewerker</summary>
- <summary xml:lang="be">Elektrische schema editor</summary>
- <summary xml:lang="da">Elektrisk diagram redigering</summary>
- <summary xml:lang="ja">電気回路図エディタ</summary>
 <content_rating type="oars-1.1"/>
 <releases>
     <release version="0.9-dev" date="2021-02-21"/>
@@ -30,10 +31,22 @@
   QElectroTech is a Qt5 application to design electric diagrams.
   It uses XML files for elements and diagrams, and includes both a diagram editor, an element editor, and a titleblock editor.
  </p>
+  <p xml:lang="be">
+   QElectroTech is een Qt5 applicatie om elektrische schema's te ontwerpen.
+   Het maakt gebruik van XML-bestanden voor elementen en diagrammen, en omvat zowel een diagram bewerker, een element bewerker, en ook een tielbloksjabloon bewerker.
+  </p>
+  <p xml:lang="ca">
+    QElectroTech és una aplicació Qt5 per crear esquemes elèctrics.
+    QET utilitza el format XML per als seus elements i esquemes i inclou un editor d'esquemes, un editor d'elements i un editor de caixetins.
+  </p>
  <p xml:lang="cs">
   QElectroTech je aplikací Qt5 určenou pro návrh nákresů elektrických obvodů.
   Pro prvky a nákresy používá soubory XML, a zahrnuje v sobě jak editor nákresů, tak editor prvků.
  </p>
+  <p xml:lang="da">
+   QElectroTech er et Qt5 program til at redigere elektriske diagrammer.
+   Det bruger XML filer for symboler og diagrammer og inkluderer diagram, symbol og titelblok redigering.
+  </p>
  <p xml:lang="de">
   QElectroTech ist eine Qt5-Anwendung zum Entwerfen von Schaltplänen.
   Die Anwendung verwendet XML-Dateien zum Speichern von Projekten und Elementbibliotheken. Neben dem Schaltplaneditor enthält die Anwendung auch Elementeditoren und einen Blattvorlageneditor.
@@ -54,9 +67,13 @@
   QElectroTech è una applicazione fatta in Qt5 per disegnare schemi elettrici.
   QET usa il formato XML per i suoi elementi e schemi, includendo anche un editor per gli stessi.
  </p>
-  <p xml:lang="ru">
-   QElectroTech - приложение написанное на Qt5 и предназначено для разработки электрических схем.
-   Приложение использует для хранения проектов и библиотек элементов файлы в XML формате. Приложение помимо редактора электричесих схем, содержит также редакторы элементов и редактор шаблонов листов.
+  <p xml:lang="ja">
+   QElectroTech は電気回路図を作成する Qt5 アプリケーションです。
+   QET は要素と回路図に XML 形式を利用し、回路図エディタ、要素エディタ、表題欄エディタを含みます。
+  </p>
+  <p xml:lang="nl">
+   QElectroTech is een Qt5 applicatie om elektrische schema's te ontwerpen.
+   Het maakt gebruik van XML-bestanden voor elementen en diagrammen, en omvat zowel een diagram bewerker, een element bewerker, en een bloksjabloon bewerker.
  </p>
  <p xml:lang="pl">
   QElectroTech to aplikacja napisana w Qt5, przeznaczona do tworzenia schematów elektrycznych.
@@ -66,22 +83,10 @@
   QElectroTech é uma aplicação baseada em Qt5 para desenhar esquemas eléctricos.
   QET utiliza ficheiros XML para os elementos e para os esquemas e inclui um editor de esquemas e um editor de elementos.
  </p>
-  <p xml:lang="nl">
-   QElectroTech is een Qt5 applicatie om elektrische schema's te ontwerpen.
-   Het maakt gebruik van XML-bestanden voor elementen en diagrammen, en omvat zowel een diagram bewerker, een element bewerker, en een bloksjabloon bewerker.
-   </p>
-  <p xml:lang="be">
-   QElectroTech is een Qt5 applicatie om elektrische schema's te ontwerpen.
-   Het maakt gebruik van XML-bestanden voor elementen en diagrammen, en omvat zowel een diagram bewerker, een element bewerker, en ook een tielbloksjabloon bewerker.
-   </p>
-  <p xml:lang="da">
-   QElectroTech er et Qt5 program til at redigere elektriske diagrammer.
-   Det bruger XML filer for symboler og diagrammer og inkluderer diagram, symbol og titelblok redigering.
-   </p>
-  <p xml:lang="ja">
-   QElectroTech は電気回路図を作成する Qt5 アプリケーションです。
-   QET は要素と回路図に XML 形式を利用し、回路図エディタ、要素エディタ、表題欄エディタを含みます。
-   </p>
+  <p xml:lang="ru">
+   QElectroTech - приложение написанное на Qt5 и предназначено для разработки электрических схем.
+   Приложение использует для хранения проектов и библиотек элементов файлы в XML формате. Приложение помимо редактора электричесих схем, содержит также редакторы элементов и редактор шаблонов листов.
+  </p>
 </description>
 <url type="homepage">http://qelectrotech.org</url>
 <screenshots>
--- a/misc/qelectrotech.xml
+++ b/misc/qelectrotech.xml
@@ -1,63 +1,63 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<mime-info xmlns="http://www.freedesktop.org/standards/shared-mime-info">
-	<mime-type type="application/x-qet-project">
-		<sub-class-of type="text/xml"/>
-		<comment>QElectroTech project file</comment>
-		<comment xml:lang="de">QElectroTech Projektdatei</comment>
-		<comment xml:lang="fr">Fichier projet QElectroTech</comment>
-		<comment xml:lang="ar">QElectrotech ملف مشروع</comment>
-		<comment xml:lang="es">Fichero proyecto QElectroTech</comment>
-		<comment xml:lang="ca">Fitxer projecte QElectroTech</comment>
-		<comment xml:lang="ru">Файл проекта QElectroTech</comment>
-		<comment xml:lang="pt">Ficheiro de projecto QElectroTech</comment>
-		<comment xml:lang="cs">Soubor s projektem pro QElectroTech</comment>
-		<comment xml:lang="pl">Plik projektu QElectrotech</comment>
-		<comment xml:lang="it">File del progetto QElectroTech</comment>
-		<comment xml:lang="el">Αρχείο έργου του QElectroTech</comment>
-		<comment xml:lang="nl">QElectroTech project bestand</comment>
-		<comment xml:lang="be">QElectroTech project bestand</comment>
-		<comment xml:lang="da">QElectroTech projekt fil</comment>
-		<comment xml:lang="ja">QElectroTech プロジェクト・ファイル</comment>
-		<glob pattern="*.qet" />
-	</mime-type>
-	<mime-type type="application/x-qet-element">
-		<sub-class-of type="text/xml"/>
-		<comment>QElectroTech element file</comment>
-		<comment xml:lang="de">QElectroTech Bauteildatei</comment>
-		<comment xml:lang="fr">Fichier élément QElectroTech</comment>
-		<comment xml:lang="ar">QElectrotech ملف مشروع</comment>
-		<comment xml:lang="ru">Файл элемента QElectroTech</comment>
-		<comment xml:lang="es">Fichero elemento QElectroTech</comment>
-		<comment xml:lang="ca">Fitxer símbol QElectroTech</comment>
-		<comment xml:lang="pt">Ficheiro de projecto QElectroTech</comment>
-		<comment xml:lang="cs">Soubor s prvkem pro QElectroTech</comment>
-		<comment xml:lang="pl">Plik elementu QElectroTech</comment>
-		<comment xml:lang="it">File del progetto QElectroTech</comment>
-		<comment xml:lang="el">Αρχείο στοιχείου του QElectroTech</comment>
-		<comment xml:lang="nl">QElectroTech element bestand</comment>
-		<comment xml:lang="be">QElectroTech element bestand</comment>
-		<comment xml:lang="da">QElectroTech symbol fil</comment>
-		<comment xml:lang="ja">QElectroTech 要素ファイル</comment>
-		<glob pattern="*.elmt" />
-	</mime-type>
-	<mime-type type="application/x-qet-titleblock">
-		<sub-class-of type="text/xml"/>
-		<comment>QElectroTech title block template file</comment>
-		<comment xml:lang="de">QElectroTech Schriftfeld Vorlagedatei</comment>
-		<comment xml:lang="fr">Modèle de cartouche QElectroTech</comment>
-		<comment xml:lang="ar">QElectrotech نموذج إطار تعريف</comment>
-		<comment xml:lang="ru">Файл шаблона основной надписи листа QElectroTech</comment>
-		<comment xml:lang="pl">Szablon tabliczki rysunkowej QElectroTech</comment>
-		<comment xml:lang="es">Modelo de cartucho QElectroTech</comment>
-		<comment xml:lang="ca">Model de bloc de títol QElectroTech</comment>
-		<comment xml:lang="cs">Vzor záhlaví výkresu pro QElectroTech</comment>
-		<comment xml:lang="pt">Modelo de moldura QElectroTech</comment>
-		<comment xml:lang="it">Modello di cartiglio per QElectroTech</comment>
-		<comment xml:lang="el">Πρότυπο πινακίδας του QElectroTech</comment>
-		<comment xml:lang="nl">QElectroTech titel bloksjabloon</comment>
-		<comment xml:lang="be">QElectroTech titel bloksjabloon</comment>
-		<comment xml:lang="da">QElectroTech titelblok skabelon</comment>
-		<comment xml:lang="ja">QElectroTech 表題欄テンプレート</comment>
-		<glob pattern="*.titleblock" />
-	</mime-type>
-</mime-info>
+<?xml version="1.0" encoding="UTF-8"?>
+<mime-info xmlns="http://www.freedesktop.org/standards/shared-mime-info">
+	<mime-type type="application/x-qet-project">
+		<sub-class-of type="text/xml"/>
+		<comment>QElectroTech project file</comment>
+		<comment xml:lang="ar">QElectrotech ملف مشروع</comment>
+		<comment xml:lang="be">QElectroTech project bestand</comment>
+		<comment xml:lang="ca">Fitxer de projecte QElectroTech</comment>
+		<comment xml:lang="cs">Soubor s projektem pro QElectroTech</comment>
+		<comment xml:lang="da">QElectroTech projekt fil</comment>
+		<comment xml:lang="de">QElectroTech Projektdatei</comment>
+		<comment xml:lang="el">Αρχείο έργου του QElectroTech</comment>
+		<comment xml:lang="es">Fichero proyecto QElectroTech</comment>
+		<comment xml:lang="fr">Fichier projet QElectroTech</comment>
+		<comment xml:lang="it">File del progetto QElectroTech</comment>
+		<comment xml:lang="ja">QElectroTech プロジェクト・ファイル</comment>
+		<comment xml:lang="nl">QElectroTech project bestand</comment>
+		<comment xml:lang="pl">Plik projektu QElectrotech</comment>
+		<comment xml:lang="pt">Ficheiro de projecto QElectroTech</comment>
+		<comment xml:lang="ru">Файл проекта QElectroTech</comment>
+		<glob pattern="*.qet" />
+	</mime-type>
+	<mime-type type="application/x-qet-element">
+		<sub-class-of type="text/xml"/>
+		<comment>QElectroTech element file</comment>
+		<comment xml:lang="ar">QElectrotech ملف مشروع</comment>
+		<comment xml:lang="be">QElectroTech element bestand</comment>
+		<comment xml:lang="ca">Fitxer d'element QElectroTech</comment>
+		<comment xml:lang="cs">Soubor s prvkem pro QElectroTech</comment>
+		<comment xml:lang="da">QElectroTech symbol fil</comment>
+		<comment xml:lang="de">QElectroTech Bauteildatei</comment>
+		<comment xml:lang="el">Αρχείο στοιχείου του QElectroTech</comment>
+		<comment xml:lang="es">Fichero elemento QElectroTech</comment>
+		<comment xml:lang="fr">Fichier élément QElectroTech</comment>
+		<comment xml:lang="it">File del progetto QElectroTech</comment>
+		<comment xml:lang="ja">QElectroTech 要素ファイル</comment>
+		<comment xml:lang="nl">QElectroTech element bestand</comment>
+		<comment xml:lang="pl">Plik elementu QElectroTech</comment>
+		<comment xml:lang="pt">Ficheiro de projecto QElectroTech</comment>
+		<comment xml:lang="ru">Файл элемента QElectroTech</comment>
+		<glob pattern="*.elmt" />
+	</mime-type>
+	<mime-type type="application/x-qet-titleblock">
+		<sub-class-of type="text/xml"/>
+		<comment>QElectroTech title block template file</comment>
+		<comment xml:lang="ar">QElectrotech نموذج إطار تعريف</comment>
+		<comment xml:lang="be">QElectroTech titel bloksjabloon</comment>
+		<comment xml:lang="ca">Model de caixetí QElectroTech</comment>
+		<comment xml:lang="cs">Vzor záhlaví výkresu pro QElectroTech</comment>
+		<comment xml:lang="da">QElectroTech titelblok skabelon</comment>
+		<comment xml:lang="de">QElectroTech Schriftfeld Vorlagedatei</comment>
+		<comment xml:lang="el">Πρότυπο πινακίδας του QElectroTech</comment>
+		<comment xml:lang="es">Modelo de cartucho QElectroTech</comment>
+		<comment xml:lang="fr">Modèle de cartouche QElectroTech</comment>
+		<comment xml:lang="it">Modello di cartiglio per QElectroTech</comment>
+		<comment xml:lang="ja">QElectroTech 表題欄テンプレート</comment>
+		<comment xml:lang="nl">QElectroTech titel bloksjabloon</comment>
+		<comment xml:lang="pl">Szablon tabliczki rysunkowej QElectroTech</comment>
+		<comment xml:lang="pt">Modelo de moldura QElectroTech</comment>
+		<comment xml:lang="ru">Файл шаблона основной надписи листа QElectroTech</comment>
+		<glob pattern="*.titleblock" />
+	</mime-type>
+</mime-info>
--- a/sources/NameList/nameslist.cpp
+++ b/sources/NameList/nameslist.cpp
@@ -174,11 +174,9 @@ void NamesList::fromXml(const pugi::xml_node &xml_element, const QHash<QString,
 /**
 	Exports the list of names to an XML element.
 	Make sure that the list of names is not empty before exporting.
-	If list is empty, set name to "en" / "NoName"
 	French:
 	Exporte la liste des noms vers un element XML. Veillez a verifier que la
 	liste de noms n'est pas vide avant de l'exporter.
-	Si la liste est vide, le nom sera "en" / "NoName".
 	@param xml_document Le document XML dans lequel l'element XML sera insere
 	@param xml_options A set of options related to XML parsing.
 	@return L'element XML correspondant a la section "names"
@@ -192,7 +190,7 @@ QDomElement NamesList::toXml(QDomDocument &xml_document, const QHash<QString, QS
 		qInfo() << " NamesList of element is empty - add default: [" << "en" << "] = " << "NoName" << "";
 		QDomElement name_elmt = xml_document.createElement(xml_opt["TagName"]);
 		name_elmt.setAttribute(xml_opt["LanguageAttribute"], "en");
-		name_elmt.appendChild(xml_document.createTextNode("NoName"));
+		name_elmt.appendChild(xml_document.createTextNode(" "));
 		names_elmt.appendChild(name_elmt);
 	} else {
 		QMapIterator<QString, QString> names_iterator(map_names);
--- a/sources/TerminalStrip/GraphicsItem/properties/terminalstriplayoutpattern.cpp
+++ b/sources/TerminalStrip/GraphicsItem/properties/terminalstriplayoutpattern.cpp
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.

 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/TerminalStrip/GraphicsItem/properties/terminalstriplayoutpattern.h
+++ b/sources/TerminalStrip/GraphicsItem/properties/terminalstriplayoutpattern.h
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.

 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/TerminalStrip/GraphicsItem/terminalstripitem.cpp
+++ b/sources/TerminalStrip/GraphicsItem/terminalstripitem.cpp
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.
 	
 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/TerminalStrip/GraphicsItem/terminalstripitem.h
+++ b/sources/TerminalStrip/GraphicsItem/terminalstripitem.h
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.

 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/TerminalStrip/ui/addterminalstripitemdialog.cpp
+++ b/sources/TerminalStrip/ui/addterminalstripitemdialog.cpp
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.

 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/TerminalStrip/ui/addterminalstripitemdialog.h
+++ b/sources/TerminalStrip/ui/addterminalstripitemdialog.h
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.

 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/TerminalStrip/ui/terminalstripeditor.cpp
+++ b/sources/TerminalStrip/ui/terminalstripeditor.cpp
@@ -57,21 +57,9 @@ TerminalStripEditor::TerminalStripEditor(QETProject *project, QWidget *parent) :
 	{
 		if (m_model->columnTypeForIndex(index) == TerminalStripModel::XRef)
 		{
-			auto mrtd = m_model->modelRealTerminalDataForIndex(index);
-			if (mrtd.element_)
-			{
-				auto elmt = mrtd.element_;
-				auto diagram = elmt->diagram();
-				if (diagram)
-				{
-					diagram->showMe();
-					if (diagram->views().size())
-					{
-						auto fit_view = elmt->sceneBoundingRect();
-						fit_view.adjust(-200,-200,200,200);
-						diagram->views().at(0)->fitInView(fit_view, Qt::KeepAspectRatioByExpanding);
-					}
-				}
+			const auto mrtd = m_model->modelRealTerminalDataForIndex(index);
+			if (mrtd.element_) {
+				QetGraphicsItem::showItem(mrtd.element_);
 			}
 		}
 	});
--- a/sources/dataBase/projectdatabase.cpp
+++ b/sources/dataBase/projectdatabase.cpp
@@ -1,5 +1,5 @@
 /*
-		Copyright 2006-2021 QElectroTech Team
+		Copyright 2006-2025 QElectroTech Team
 		This file is part of QElectroTech.

 		QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/dataBase/projectdatabase.h
+++ b/sources/dataBase/projectdatabase.h
@@ -1,5 +1,5 @@
 /*
-		Copyright 2006-2021 QElectroTech Team
+		Copyright 2006-2025 QElectroTech Team
 		This file is part of QElectroTech.

 		QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/factory/propertieseditorfactory.cpp
+++ b/sources/factory/propertieseditorfactory.cpp
@@ -1,5 +1,5 @@
 /*
-		Copyright 2006-2021 QElectroTech Team
+		Copyright 2006-2025 QElectroTech Team
 		This file is part of QElectroTech.

 		QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/qetgraphicsitem/ViewItem/projectdbmodel.cpp
+++ b/sources/qetgraphicsitem/ViewItem/projectdbmodel.cpp
@@ -1,5 +1,5 @@
 /*
-				Copyright 2006-2021 QElectroTech Team
+				Copyright 2006-2025 QElectroTech Team
 				This file is part of QElectroTech.
 				
 				QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/qetgraphicsitem/conductor.cpp
+++ b/sources/qetgraphicsitem/conductor.cpp
@@ -229,43 +229,53 @@ void Conductor::updateConductorPath(const QPointF &p1, Qet::Orientation o1, cons
 	Q_ASSERT_X(!conductor_profile.isNull(),                 "Conductor::priv_modifieConductor", "pas de profil utilisable");

 	// recupere les coordonnees fournies des bornes
+	// retrieve the coordinates provided for the terminals
 	QPointF new_p1 = mapFromScene(p1);
 	QPointF new_p2 = mapFromScene(p2);
 	QRectF new_rect = QRectF(new_p1, new_p2);

 	// recupere la largeur et la hauteur du profil
+	// retrieve the width and height of the profile
 	qreal profile_width  = conductor_profile.width();
 	qreal profile_height = conductor_profile.height();

 	// calcule les differences verticales et horizontales a appliquer
+	// calculates the vertical and horizontal differences to be applied
 	qreal h_diff = (qAbs(new_rect.width())  - qAbs(profile_width) ) * getSign(profile_width);
 	qreal v_diff = (qAbs(new_rect.height()) - qAbs(profile_height)) * getSign(profile_height);

 	// applique les differences aux segments
+	// apply the differences to the segments
 	QMultiHash<ConductorSegmentProfile *, qreal> segments_lengths;
 	segments_lengths.unite(shareOffsetBetweenSegments(h_diff, conductor_profile.horizontalSegments()));
 	segments_lengths.unite(shareOffsetBetweenSegments(v_diff, conductor_profile.verticalSegments()));

 	// en deduit egalement les coefficients d'inversion (-1 pour une inversion, +1 pour conserver le meme sens)
+	// also deduce the inversion coefficients (-1 for inversion, +1 to keep the same direction)
 	int horiz_coeff = getCoeff(new_rect.width(),  profile_width);
 	int verti_coeff = getCoeff(new_rect.height(), profile_height);

 	// genere les nouveaux points
+	// generate the new points
 	QList<QPointF> points;
 	points << new_p1;
 	int limit = conductor_profile.segments.count() - 1;
 	for (int i = 0 ; i < limit ; ++ i) {
 		// dernier point
+		// last point
 		QPointF previous_point = points.last();

 		// profil de segment de conducteur en cours
+		// current conductor segment profile
 		ConductorSegmentProfile *csp = conductor_profile.segments.at(i);

 		// coefficient et offset a utiliser pour ce point
+		// coefficient and offset to be used for this point
 		qreal coeff = csp -> isHorizontal ? horiz_coeff : verti_coeff;
 		qreal offset_applied = segments_lengths.value(csp);

 		// applique l'offset et le coeff au point
+		// apply coefficient and offset to point
 		if (csp -> isHorizontal) {
 			points << QPointF (
 				previous_point.x() + (coeff * offset_applied),
@@ -989,16 +999,16 @@ void Conductor::pointsToSegments(const QList<QPointF>& points_list) {

 /**
 	@brief Conductor::fromXml
-	Load the conductor and her information from xml element
+	Load the conductor and its information from xml element
 	@param dom_element
-	@return true is loading success else return false
+	@return true if loading succeeded else return false
 */
 bool Conductor::fromXml(QDomElement &dom_element)
 {
 	setPos(dom_element.attribute("x", nullptr).toDouble(),
 		   dom_element.attribute("y", nullptr).toDouble());

-	bool return_ = pathFromXml(dom_element);
+	bool retval = pathFromXml(dom_element);

 	m_text_item -> fromXml(dom_element);
 	ConductorProperties pr;
@@ -1010,11 +1020,11 @@ bool Conductor::fromXml(QDomElement &dom_element)
 	else
 		m_autoNum_seq.fromXml(dom_element.firstChildElement("sequentialNumbers"));

-	m_freeze_label = dom_element.attribute("freezeLabel") == "true"? true : false;
+	m_freeze_label = dom_element.attribute("freezeLabel") == "true" ? true : false;

 	setProperties(pr);

-	return return_;
+	return retval;
 }

 /**
@@ -1134,13 +1144,14 @@ bool Conductor::pathFromXml(const QDomElement &e) {
 		}
 	}

-	//If there isn't segment we generate automatic path and return true
+	// If there is no segment, we generate an automatic path and return true
 	if (!segments_x.size()) {
 		generateConductorPath(terminal1 -> dockConductor(), terminal1 -> orientation(), terminal2 -> dockConductor(), terminal2 -> orientation());
 		return(true);
 	}

 	// les longueurs recueillies doivent etre coherentes avec les positions des bornes
+	// The collected lengths must be consistent with the positions of the terminals  
 	qreal width = 0.0, height = 0.0;
 	foreach (qreal t, segments_x) width  += t;
 	foreach (qreal t, segments_y) height += t;
@@ -1256,65 +1267,57 @@ ConductorSegment *Conductor::middleSegment()
 */
 QPointF Conductor::posForText(Qt::Orientations &flag)
 {
-
-	ConductorSegment *segment      = segments;
-	bool all_segment_is_vertical   = true;
-	bool all_segment_is_horizontal = true;
+	ConductorSegment *segment        = segments;
+	bool all_segments_are_vertical   = true;
+	bool all_segments_are_horizontal = true;

 		//Go to first segment
 	while (!segment->isFirstSegment()) {
 		segment = segment->previousSegment();
 	}

-
 	QPointF p1 = segment -> firstPoint(); //<First point of conductor
-	ConductorSegment *biggest_segment = segment; //<biggest segment: contain the longest segment of conductor.
+	ConductorSegment *longest_segment = segment; //<the longest segment of conductor.

+		// check if all segments are horizontal or vertical ... first segment:
 	if (segment -> firstPoint().x() != segment -> secondPoint().x())
-		all_segment_is_vertical   = false;
+		all_segments_are_vertical   = false;
 	if (segment -> firstPoint().y() != segment -> secondPoint().y())
-		all_segment_is_horizontal = false;
-
+		all_segments_are_horizontal = false;
+		// find longest segment
 	while (segment -> hasNextSegment())
 	{
 		segment = segment -> nextSegment();
-
 		if (segment -> firstPoint().x() != segment -> secondPoint().x())
-			all_segment_is_vertical   = false;
+			all_segments_are_vertical   = false;
 		if (segment -> firstPoint().y() != segment -> secondPoint().y())
-			all_segment_is_horizontal = false;
+			all_segments_are_horizontal = false;

-			//We must compare length segment, but they can be negative
-			//so we multiply by -1 to make it positive.
-		int saved = biggest_segment -> length();
-		if (saved < 0) saved *= -1;
-		int curent = segment->length();
-		if (curent < 0) curent *= -1;
-
-		if (curent > saved) biggest_segment = segment;
+		if (qAbs(segment->length()) > qAbs(longest_segment -> length()))
+			longest_segment = segment;
 	}

-	QPointF p2 = segment -> secondPoint();//<Last point of conductor
+	QPointF p2 = segment -> secondPoint(); //<Last point of conductor

 	//If the conductor is horizontal or vertical
 	//Return the point at the middle of conductor
-	if (all_segment_is_vertical) { //<Vertical
+	if (all_segments_are_vertical) { //<Vertical
 		flag = Qt::Vertical;
 		if (p1.y() > p2.y()) {
 			p1.setY(p1.y() - (length()/2));
 		} else {
 			p1.setY(p1.y() + (length()/2));
 		}
-	} else if (all_segment_is_horizontal) { //<Horizontal
+	} else if (all_segments_are_horizontal) { //<Horizontal
 		flag = Qt::Horizontal;
 		if (p1.x() > p2.x()) {
 			p1.setX(p1.x() - (length()/2));
 		} else {
 			p1.setX(p1.x() + (length()/2));
 		}
-	} else { //Return the point at the middle of biggest segment.
-		p1 = biggest_segment->middle();
-		flag = (biggest_segment->isHorizontal())? Qt::Horizontal : Qt::Vertical;
+	} else { //Return the point at the middle of longest segment.
+		p1 = longest_segment->middle();
+		flag = (longest_segment->isHorizontal())? Qt::Horizontal : Qt::Vertical;
 	}
 	return p1;
 }
@@ -1420,7 +1423,7 @@ void Conductor::calculateTextItemPosition()
 /**
 	Sauvegarde le profil courant du conducteur pour l'utiliser ulterieurement
 	dans priv_modifieConductor.
-	Save the current conductors profile for later use in priv_modifiedConductor.
+	Save the current conductors profile for later use in priv_modifieConductor.
 */
 void Conductor::saveProfile(bool undo) {
 	Qt::Corner current_path_type = currentPathType();
@@ -1487,7 +1490,7 @@ ConductorProfile Conductor::profile(Qt::Corner path_type) const
 /**
 	@brief Conductor::refreshText
 	Refresh the text of this conductor.
-	recalcule and set the text according to the formula.
+	recalculate and set the text according to the formula.
 */
 void Conductor::refreshText()
 {
--- a/sources/qetgraphicsitem/crossrefitem.cpp
+++ b/sources/qetgraphicsitem/crossrefitem.cpp
@@ -320,24 +320,7 @@ void CrossRefItem::paint(
 void CrossRefItem::mouseDoubleClickEvent(QGraphicsSceneMouseEvent *event)
 {
 	event->accept();
-	if (m_hovered_contact && m_hovered_contact->scene())
-	{
-			//Show and select the linked slave element
-		if (scene() != m_hovered_contact->scene())
-		{
-			m_hovered_contact->diagram()->showMe();
-		}
-		m_hovered_contact->setSelected(true);
-
-			//Zoom to the linked slave element
-		foreach(QGraphicsView *view,
-				m_hovered_contact->diagram()->views())
-		{
-			QRectF fit = m_hovered_contact->sceneBoundingRect();
-			fit.adjust(-200, -200, 200, 200);
-			view->fitInView(fit, Qt::KeepAspectRatioByExpanding);
-		}
-	}
+	QetGraphicsItem::showItem(m_hovered_contact);
 }

 /**
--- a/sources/qetgraphicsitem/diagramtextitem.cpp
+++ b/sources/qetgraphicsitem/diagramtextitem.cpp
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2021 QElectroTech Team
+	Copyright 2006-2025 QElectroTech Team
 	This file is part of QElectroTech.
 	
 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/qetgraphicsitem/dynamicelementtextitem.cpp
+++ b/sources/qetgraphicsitem/dynamicelementtextitem.cpp
@@ -1277,18 +1277,8 @@ void DynamicElementTextItem::zoomToLinkedElement()
 			//move when linked element is in the same scene of this.
 		setSelected(false);
 		ungrabMouse();
-		
-		if(scene() != zoomed_element->scene())
-			zoomed_element->diagram()->showMe();
-		zoomed_element->setSelected(true);
-		
-			//Zoom to the element
-		for(QGraphicsView *view : zoomed_element->scene()->views())
-		{
-			QRectF fit = zoomed_element->sceneBoundingRect();
-			fit.adjust(-200, -200, 200, 200);
-			view->fitInView(fit, Qt::KeepAspectRatioByExpanding);
-		}
+
+		QetGraphicsItem::showItem(zoomed_element);
 	}
 }

--- a/sources/qetgraphicsitem/slaveelement.cpp
+++ b/sources/qetgraphicsitem/slaveelement.cpp
@@ -18,8 +18,6 @@
 #include "slaveelement.h"

 #include "../diagram.h"
-#include "../diagramposition.h"
-#include "../qetapp.h"
 #include "dynamicelementtextitem.h"

 /**
@@ -33,9 +31,7 @@ SlaveElement::SlaveElement(const ElementsLocation &location,
 			   QGraphicsItem *qgi,
 			   int *state) :
 	Element(location, qgi, state, Element::Slave)
-{
-	m_xref_item = nullptr;
-}
+{}

 /**
 	@brief SlaveElement::~SlaveElement
--- a/sources/qetgraphicsitem/slaveelement.h
+++ b/sources/qetgraphicsitem/slaveelement.h
@@ -18,7 +18,6 @@
 #ifndef SLAVEELEMENT_H
 #define SLAVEELEMENT_H

-#include "../properties/xrefproperties.h"
 #include "element.h"

 class SlaveElement : public Element
@@ -33,9 +32,6 @@ class SlaveElement : public Element
 		void linkToElement(Element *elmt) override;
 		void unlinkAllElements() override;
 		void unlinkElement(Element *elmt) override;
-	
-	private:
-		QGraphicsTextItem *m_xref_item;
 };

 #endif // SLAVEELEMENT_H
--- a/sources/ui/configpage/generalconfigurationpage.cpp
+++ b/sources/ui/configpage/generalconfigurationpage.cpp
@@ -21,6 +21,7 @@
 #include "../../qeticons.h"
 #include "ui_generalconfigurationpage.h"
 #include "../../utils/qetsettings.h"
+#include "../../qetmessagebox.h"

 #include <QFileDialog>
 #include <QFontDialog>
@@ -83,7 +84,6 @@ GeneralConfigurationPage::GeneralConfigurationPage(QWidget *parent) :
 	ui->m_use_gesture_trackpad->setChecked(settings.value("diagramview/gestures", false).toBool());
 	ui->m_save_label_paste->setChecked(settings.value("diagramcommands/erase-label-on-copy", true).toBool());
 	ui->m_use_folio_label->setChecked(settings.value("genericpanel/folio", true).toBool());
-	ui->m_export_terminal->setChecked(settings.value("nomenclature-exportlist", true).toBool());
 	ui->m_border_0->setChecked(settings.value("border-columns_0", false).toBool());
 	ui->m_autosave_sb->setValue(settings.value("diagrameditor/autosave-interval", 0).toInt());
 	
@@ -224,9 +224,6 @@ void GeneralConfigurationPage::applyConf()
 		//GENERIC PANEL
 	settings.setValue("genericpanel/folio",ui->m_use_folio_label->isChecked());

-		//NOMENCLATURE
-	settings.setValue("nomenclature/terminal-exportlist",ui->m_export_terminal->isChecked());
-

 		//DIAGRAM EDITOR
 	QString view_mode = ui->m_use_tab_mode_rb->isChecked() ? "tabbed" : "windowed";
@@ -564,3 +561,29 @@ void GeneralConfigurationPage::on_ElementEditor_Grid_PointSize_min_sb_valueChang
 {
 	ui->ElementEditor_Grid_PointSize_max_sb->setMinimum(std::max(1, value));
 }
+
+void GeneralConfigurationPage::on_m_hdpi_round_cb_clicked(bool checked)
+{
+	if (checked) {
+		if (QMessageBox::Cancel == QET::QetMessageBox::warning(
+				this,
+				tr("Fonctionnalité expérimental"),
+				tr("AVERTISSEMENT :\n"
+				   "Toutes valeurs autre que ‘Pas d’arrondi’ peut causer des erreurs de rendu "
+					"du projet en fonction de :\n\n"
+					"1 - la valeur sélectionnée \n"
+					"2 - du dpi de l'écran \n"
+					"3 - Modifier le projet sur un autre ordinateur et/ou écran n'ayant pas les mêmes paramètres des points 1 et 2."),
+				QMessageBox::StandardButton::Cancel|QMessageBox::StandardButton::Ok,
+				QMessageBox::StandardButton::Cancel
+														   )) {
+			ui->m_hdpi_round_cb->blockSignals(true);
+			ui->m_hdpi_round_cb->setChecked(false);
+			ui->m_hdpi_round_cb->blockSignals(false);
+			return;
+		}
+	}
+	ui->m_hdpi_round_label->setEnabled(checked);
+	ui->m_hdpi_round_policy_cb->setEnabled(checked);
+}
+
--- a/sources/ui/configpage/generalconfigurationpage.h
+++ b/sources/ui/configpage/generalconfigurationpage.h
@@ -51,6 +51,8 @@ class GeneralConfigurationPage : public ConfigPage
 		void on_DiagramEditor_Grid_PointSize_min_sb_valueChanged(int value);
 		void on_ElementEditor_Grid_PointSize_min_sb_valueChanged(int value);

+		void on_m_hdpi_round_cb_clicked(bool checked);
+
 	private:
 		void fillLang();
 	
--- a/sources/ui/configpage/generalconfigurationpage.ui
+++ b/sources/ui/configpage/generalconfigurationpage.ui
@@ -6,7 +6,7 @@
   <rect>
    <x>0</x>
    <y>0</y>
-    <width>872</width>
+    <width>955</width>
    <height>556</height>
   </rect>
  </property>
@@ -17,7 +17,7 @@
   <item>
    <widget class="QTabWidget" name="tabWidget">
     <property name="currentIndex">
-      <number>1</number>
+      <number>0</number>
     </property>
     <widget class="QWidget" name="tab_3">
      <attribute name="title">
@@ -82,7 +82,7 @@
       </item>
       <item>
        <widget class="QWidget" name="m_hdpi_round_policy_widget" native="true">
-         <layout class="QHBoxLayout" name="horizontalLayout">
+         <layout class="QHBoxLayout" name="horizontalLayout" stretch="0,0,1">
          <property name="leftMargin">
           <number>0</number>
          </property>
@@ -96,14 +96,28 @@
           <number>0</number>
          </property>
          <item>
-           <widget class="QLabel" name="label_2">
+           <widget class="QCheckBox" name="m_hdpi_round_cb">
+            <property name="text">
+             <string/>
+            </property>
+           </widget>
+          </item>
+          <item>
+           <widget class="QLabel" name="m_hdpi_round_label">
+            <property name="enabled">
+             <bool>false</bool>
+            </property>
            <property name="text">
             <string>Méthode de mise à l'echelle des écrans à haute densité de pixels (hdpi) (appliqué au prochain lancement de QElectroTech) :</string>
            </property>
           </widget>
          </item>
          <item>
-           <widget class="QComboBox" name="m_hdpi_round_policy_cb"/>
+           <widget class="QComboBox" name="m_hdpi_round_policy_cb">
+            <property name="enabled">
+             <bool>false</bool>
+            </property>
+           </widget>
          </item>
         </layout>
        </widget>
@@ -128,41 +142,21 @@
       <string>Projets</string>
      </attribute>
      <layout class="QGridLayout" name="gridLayout_2">
-       <item row="4" column="1">
-        <spacer name="horizontalSpacer">
-         <property name="orientation">
-          <enum>Qt::Horizontal</enum>
+       <item row="1" column="0">
+        <widget class="QCheckBox" name="m_use_folio_label">
+         <property name="text">
+          <string>Utiliser les numéros de folio à la place de leur position dans le projet</string>
         </property>
-         <property name="sizeHint" stdset="0">
-          <size>
-           <width>40</width>
-           <height>20</height>
-          </size>
-         </property>
-        </spacer>
+        </widget>
       </item>
-       <item row="4" column="0">
+       <item row="3" column="0">
        <widget class="QLabel" name="label">
         <property name="text">
          <string>Sauvegarde automatique des projets (appliqué au prochain lancement de QElectroTech)</string>
         </property>
        </widget>
       </item>
-       <item row="0" column="0">
-        <widget class="QCheckBox" name="m_save_label_paste">
-         <property name="text">
-          <string>Ne pas conserver les labels des éléments lors des copier coller</string>
-         </property>
-        </widget>
-       </item>
-       <item row="3" column="0">
-        <widget class="QCheckBox" name="m_border_0">
-         <property name="text">
-          <string extracomment="Choix de l'increment de depart 1 ou 0">Numéroter les colonnes de cartouche à partir de 0 (1 sinon)</string>
-         </property>
-        </widget>
-       </item>
-       <item row="4" column="2">
+       <item row="3" column="2">
        <widget class="QSpinBox" name="m_autosave_sb">
         <property name="frame">
          <bool>true</bool>
@@ -184,14 +178,14 @@
         </property>
        </widget>
       </item>
-       <item row="1" column="0">
-        <widget class="QCheckBox" name="m_use_folio_label">
+       <item row="0" column="0">
+        <widget class="QCheckBox" name="m_save_label_paste">
         <property name="text">
-          <string>Utiliser les numéros de folio à la place de leur position dans le projet</string>
+          <string>Ne pas conserver les labels des éléments lors des copier coller</string>
         </property>
        </widget>
       </item>
-       <item row="5" column="0">
+       <item row="4" column="0">
        <spacer name="verticalSpacer_2">
         <property name="orientation">
          <enum>Qt::Vertical</enum>
@@ -204,10 +198,23 @@
         </property>
        </spacer>
       </item>
+       <item row="3" column="1">
+        <spacer name="horizontalSpacer">
+         <property name="orientation">
+          <enum>Qt::Horizontal</enum>
+         </property>
+         <property name="sizeHint" stdset="0">
+          <size>
+           <width>40</width>
+           <height>20</height>
+          </size>
+         </property>
+        </spacer>
+       </item>
       <item row="2" column="0">
-        <widget class="QCheckBox" name="m_export_terminal">
+        <widget class="QCheckBox" name="m_border_0">
         <property name="text">
-          <string>Exporter les bornes dans la nomenclature</string>
+          <string extracomment="Choix de l'increment de depart 1 ou 0">Numéroter les colonnes de cartouche à partir de 0 (1 sinon)</string>
         </property>
        </widget>
       </item>
@@ -1090,7 +1097,6 @@ Vous pouvez spécifier ici la valeur par défaut de ce champ pour les éléments
  <tabstop>m_use_tab_mode_rb</tabstop>
  <tabstop>m_save_label_paste</tabstop>
  <tabstop>m_use_folio_label</tabstop>
-  <tabstop>m_export_terminal</tabstop>
  <tabstop>m_border_0</tabstop>
  <tabstop>m_autosave_sb</tabstop>
  <tabstop>m_common_elmt_path_cb</tabstop>
--- a/sources/ui/dynamicelementtextitemeditor.cpp
+++ b/sources/ui/dynamicelementtextitemeditor.cpp
@@ -146,7 +146,6 @@ void DynamicElementTextItemEditor::setCurrentText(DynamicElementTextItem *text)
 		return;

 	ui->m_tree_view->expand(index);
-//	ui->m_tree_view->expand(index.QModelIndex::model()->index(0,0));  // commented by plc-user: leads to crash, when other textitem was selected before
 	ui->m_tree_view->setCurrentIndex(index);
 	ui->m_remove_selection->setEnabled(true);
 }
--- a/sources/undocommand/movegraphicsitemcommand.cpp
+++ b/sources/undocommand/movegraphicsitemcommand.cpp
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.
 	
 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/undocommand/movegraphicsitemcommand.h
+++ b/sources/undocommand/movegraphicsitemcommand.h
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.

 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/xml/terminalstripitemxml.cpp
+++ b/sources/xml/terminalstripitemxml.cpp
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.
 	
 	QElectroTech is free software: you can redistribute it and/or modify
--- a/sources/xml/terminalstripitemxml.h
+++ b/sources/xml/terminalstripitemxml.h
@@ -1,5 +1,5 @@
 /*
-	Copyright 2006-2022 The QElectroTech Team
+	Copyright 2006-2025 The QElectroTech Team
 	This file is part of QElectroTech.
 	
 	QElectroTech is free software: you can redistribute it and/or modify
Author	SHA1	Message	Date
joshua	4e695de914	chore : Add message box for advise use hpdi round factor is unsafe Add a message box to advise user that use a hdpi round factor can cause strange render according to : 1 - the selected value 2 - the dpi of the screen 3 - Edit the project on another computer and/or screen who don't have the same parameters as point 1 and 2.	2025-11-14 21:23:29 +01:00
plc-user	3803834d6d	re-add deleted paragraph and sort language entries alphabetically	2025-11-04 21:17:23 +01:00
Laurent Trinques	78a26f9175	Update Catalan Translation, thanks Antoni	2025-11-04 15:06:07 +01:00
Laurent Trinques	a990daaf9e	Update Catalan translation, thanks Antoni	2025-10-31 10:04:18 +01:00
plc-user	3b7a8a17e4	update "osifont.ttf" from upstream	2025-10-30 18:26:03 +01:00
Laurent Trinques	9e78dc56a8	git submodule update --remote elements	2025-10-28 13:25:44 +01:00
joshua	3cf9095899	refactor[diagram editor] close bug. Close bug report #324 https://qelectrotech.org/bugtracker/view.php?id=324 See commit #1b671990ee8435616725afdffba438fdfcd18069	2025-10-20 23:31:48 +02:00
joshua	3a1398d752	refactor[diagram editor]: remove unused include	2025-10-20 23:09:03 +02:00
joshua	67a7d277f4	refactor(diagram editor) : remove unused code	2025-10-20 23:02:52 +02:00
joshua	e26f7fdaaa	refactor[deiagram editor]: mutualize code. The features used to jump to linked element and xref now use the same function.	2025-10-20 22:58:12 +02:00
joshua	f74fed9f3f	refactor(diagram editor): remove unused checkbox Remove the checkbox "export terminal in nomenclature" in the general configuration page because it's a dead code.	2025-10-20 22:10:39 +02:00
plc-user	410c9293d1	adjust variable-names and comments; minor change in length-compare of conductor-segments	2025-10-19 15:48:03 +02:00
plc-user	07c34d7358	add and correct English comments	2025-10-19 15:37:07 +02:00
plc-user	6d7d1ea23b	NamesList: Set empty string for name, when no name is set This should fix an issue with empty fields in titleblocks.	2025-10-19 15:09:24 +02:00
Laurent Trinques	58339f9016	Fix copyright years	2025-10-17 09:58:39 +02:00