Merge pull request #1028 from ispyisail/fix/spacemouse-macos-shared-open

Fix 3D mouse not detected on macOS while 3DxWare is running

.gitattributes

@@ -1 +0,0 @@
-*.qch filter=lfs diff=lfs merge=lfs -text

.github/workflows/auto-doxygen.yml

@@ -1,67 +0,0 @@
-name: Auto-build doxygen docs
-on:
-  push:
-    tags:
-       - '**'
-   
-  
-  
-jobs:  
-  doxygen:
-    permissions:
-       contents: write    
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        submodules: 'recursive'
-        show-progress: ''
-    - name: Setup and run doxygen
-      run: sudo apt update && sudo apt install doxygen graphviz qhelpgenerator-qt5 -y
-    - name: Set up Git LFS
-      run: |
-          git lfs install
-          git lfs track "*.qch"  
-    - name: Run doxygen
-      run: doxygen Doxyfile
-    - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v8
-      with:
-        token: ${{ secrets.MR_TOKEN }}
-        commit-message: update QCH file
-        committer: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
-        title: Update QCH Help file
-        body: |
-         - Updating QT Help file following commit ${{ github.sha }}.
-         - Auto-generated by [create-pull-request][1]
-
-         [1]: https://github.com/peter-evans/create-pull-request
-        branch: update-qch
-        labels: | 
-          qch
-          cicd
-        delete-branch: true
-        add-paths: doc/*.qch
-    - uses: actions/upload-pages-artifact@v3
-      with: 
-       path: ${{ github.workspace }}/doc/html/
-  deploy:
-    # Add a dependency to the build job
-    needs: doxygen
-
-    # Grant GITHUB_TOKEN the permissions required to make a Pages deployment
-    permissions:
-      pages: write      # to deploy to Pages
-      id-token: write   # to verify the deployment originates from an appropriate source
-
-    # Deploy to the github-pages environment
-    environment:
-      name: github-pages
-      url: ${{ steps.deployment.outputs.page_url }}
-
-    # Specify runner + deployment step
-    runs-on: ubuntu-latest
-    steps:
-      - name: Deploy to GitHub Pages
-        id: deployment
-        uses: actions/deploy-pages@v4 # or specific "vX.X.X" version tag for this action

.github/workflows/linux-build.yml

@@ -28,7 +28,7 @@ jobs:
           DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
             ca-certificates build-essential cmake ninja-build git pkg-config \
             qt6-base-dev qt6-base-private-dev qt6-tools-dev qt6-tools-dev-tools \
-            libqt6svg6-dev libqt6sql6-sqlite libsqlite3-dev libcups2-dev \
+            libqt6svg6-dev libqt6sql6-sqlite libcups2-dev libsqlite3-dev \
             libxkbcommon-x11-0 \
             xvfb openbox xdotool x11-utils
           # extra-cmake-modules and the KF6 libraries are installed rather than
@@ -53,7 +53,9 @@ jobs:
           git config --global --add safe.directory "$GITHUB_WORKSPACE"
           cmake -B build -G Ninja \
             -DCMAKE_BUILD_TYPE=Debug \
-            -DQT_VERSION_MAJOR=6
+            -DQT_VERSION_MAJOR=6 \
+            -DCMAKE_POLICY_VERSION_MINIMUM=3.5 \
+            -DQET_EXPORT_PROJECT_DB=ON 
 
       - name: Build
         run: cmake --build build --parallel $(nproc)

.github/workflows/windows-build.yml

@@ -57,6 +57,7 @@ jobs:
             mingw-w64-ucrt-x86_64-nsis
             mingw-w64-ucrt-x86_64-angleproject
             mingw-w64-ucrt-x86_64-qt6-declarative
+            mingw-w64-ucrt-x86_64-hidapi
 
       - name: Cache ccache
         uses: actions/cache@v5
@@ -120,6 +121,8 @@ jobs:
             -DCMAKE_POLICY_DEFAULT_CMP0077=NEW \
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5 \
             -DQET_EXPORT_PROJECT_DB=ON \
+            -DQET_ENABLE_SPACEMOUSE=ON \
+            -DQET_SPACEMOUSE_BACKEND=hid \
             -DCMAKE_C_COMPILER_LAUNCHER=/ucrt64/bin/ccache \
             -DCMAKE_CXX_COMPILER_LAUNCHER=/ucrt64/bin/ccache \
             -DSQLite3_INCLUDE_DIR=/ucrt64/include \
@@ -146,6 +149,11 @@ jobs:
           SIZE=$(stat -c%s "$EXE")
           echo "Exe found: $EXE ($SIZE bytes)"
           [ "$SIZE" -gt 100000 ] || { echo "ERROR: exe too small"; exit 1; }
+          # 3D mouse support (discussion #599): CMake only warns when hidapi
+          # is missing, which would ship a package without it -- fail here.
+          ldd "$EXE" | grep -qi 'libhidapi' \
+            || { echo "ERROR: exe not linked against hidapi -- 3D mouse support missing"; exit 1; }
+          echo "3D mouse support: linked against $(ldd "$EXE" | grep -io 'libhidapi[^ ]*' | head -1)"
 
       - name: Deploy — copy exe + windeployqt + DLLs
         shell: msys2 {0}
@@ -191,6 +199,8 @@ jobs:
           echo "=== $DLL_COUNT DLLs present after scan ==="
           ls -lh "$BIN/QElectroTech.exe" || { echo "ERROR: exe missing from bin/"; exit 1; }
           [ "$DLL_COUNT" -gt 5 ] || { echo "ERROR: too few DLLs"; exit 1; }
+          # Without it QElectroTech.exe would not start at all.
+          [ -f "$BIN/libhidapi-0.dll" ] || { echo "ERROR: libhidapi-0.dll not deployed"; exit 1; }
           cd "$GITHUB_WORKSPACE"
 
           cp /ucrt64/bin/libgcc_s_seh-1.dll  "$BIN/"

.github/workflows/windows-msi.yml

@@ -59,17 +59,41 @@ jobs:
 
       # ----------------------------------------------------------------
       # 2. Download the portable artifact for this flavor
+      #
+      #    Wrapped in nick-fields/retry: actions/download-artifact@v8 has
+      #    shown repeated "Artifact download failed after 5 retries"
+      #    failures on this cross-workflow download (via run-id) — not a
+      #    real content/digest problem, just flaky Azure blob delivery.
+      #    Two separate occurrences observed within days of each other
+      #    (different artifact IDs/digests, same failure signature), each
+      #    one enough to fail build-msi outright and block the rest of the
+      #    pipeline. Retrying the whole download 3x is cheap insurance.
+      #    Switched to `gh run download` here because nick-fields/retry
+      #    can only retry a shell command, not re-invoke a `uses:` step.
       # ----------------------------------------------------------------
       - name: Download portable artifact
-        uses: actions/download-artifact@v8
+        uses: nick-fields/retry@v3
         with:
-          name: ${{ matrix.portable_artifact }}
-          path: artifact\files
-          # workflow_run => use the triggering run's ID
-          # workflow_dispatch => use input run_id if provided, otherwise current run
-          run-id: ${{ github.event.workflow_run.id || github.event.inputs.run_id || github.run_id }}
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-          repository: ${{ github.repository }}
+          timeout_minutes: 10
+          max_attempts: 3
+          retry_wait_seconds: 30
+          shell: pwsh
+          command: |
+            if (Test-Path "artifact\files") { Remove-Item -Recurse -Force "artifact\files" }
+            New-Item -ItemType Directory -Force -Path "artifact\files" | Out-Null
+
+            $runId = "${{ github.event.workflow_run.id || github.event.inputs.run_id || github.run_id }}"
+            gh run download $runId `
+              --repo "${{ github.repository }}" `
+              --name "${{ matrix.portable_artifact }}" `
+              --dir "artifact\files"
+
+            if ($LASTEXITCODE -ne 0) {
+              Write-Error "gh run download failed (exit $LASTEXITCODE)"
+              exit $LASTEXITCODE
+            }
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
       # ----------------------------------------------------------------
       # 3. Extract version
@@ -336,7 +360,13 @@ jobs:
           if-no-files-found: error
 
       - name: Delete old nightly .msi asset
-        if: always()
+        # Only run if a new MSI actually exists in dist/ — otherwise the old
+        # (still working) nightly .msi would be deleted without anything to
+        # replace it, leaving the nightly release with no MSI at all until
+        # the next successful build (see windows-msi-pipeline notes,
+        # run 35694391567: an upstream artifact-download failure meant
+        # dist\*.msi never existed for that run).
+        if: always() && hashFiles('dist/*.msi') != ''
         env:
           GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
           REPO: ${{ github.repository }}
@@ -381,7 +411,20 @@ jobs:
   deploy-pages:
     needs: build-msi
     runs-on: ubuntu-latest
-    if: always() && needs.build-msi.result == 'success'
+    # Regenerate the page whenever the MSI job actually ran (success OR
+    # packaging/signing failure) — not only on full success.
+    # generate-page.py queries the published assets on the "nightly"
+    # release itself (line 407: `gh release view nightly --json assets`),
+    # so it already handles a missing MSI natively (empty MSI_NAME -> no
+    # MSI button on the page). The page only needs the exe/zip already
+    # published by windows-build.yml, independent of the MSI's fate.
+    # Only "skipped"/"cancelled" are excluded: if build-msi never ran at
+    # all (e.g. Windows Build itself failed), there is nothing new to
+    # publish and regenerating the page would be pointless.
+    if: >
+      always() &&
+      needs.build-msi.result != 'skipped' &&
+      needs.build-msi.result != 'cancelled'
     permissions:
       contents: write
       pages: write

.gitignore

@@ -1,5 +1,7 @@
 *.snap
 .flatpak-builder
+__pycache__/
+*.pyc
 # Qt build output
 *.user
 # doxygen Doxyfile output
@@ -7,12 +9,4 @@ doc/*
 !doc/QElectroTech.qch
 QElectroTech.tag
 !doc/doc-utils
-lang/*.qm
-
-# -- IDE settings/intermediate files --
-# zed
-.zed
-.cache
-
-# VS Code
-.vscode
+ui_*.h

CMakeLists.txt

@@ -36,6 +36,7 @@ include(cmake/git_update_submodules.cmake)
 include(cmake/git_last_commit_sha.cmake)
 include(cmake/fetch_singleapplication.cmake)
 include(cmake/fetch_pugixml.cmake)
+include(cmake/find_spacemouse.cmake)
 include(cmake/qet_compilation_vars.cmake)
 
 set(CMAKE_INCLUDE_CURRENT_DIR ON)
@@ -169,6 +170,13 @@ else()
     )
 endif()
 
+if(QET_SPACEMOUSE_BACKEND_SPNAV_ENABLED)
+    list(APPEND QET_SPACEMOUSE_LIBRARIES PkgConfig::SPNAV)
+endif()
+if(QET_SPACEMOUSE_BACKEND_HID_ENABLED)
+    list(APPEND QET_SPACEMOUSE_LIBRARIES PkgConfig::HIDAPI)
+endif()
+
 if(APPLE)
     # CFBundleIdentifier must not be empty. CMake's default Info.plist
     # template fills it from MACOSX_BUNDLE_GUI_IDENTIFIER; with that unset
@@ -287,6 +295,7 @@ target_link_libraries(
     SQLite3::SQLite3
     ${KF_PRIVATE_LIBRARIES}
     ${QET_PRIVATE_LIBRARIES}
+    ${QET_SPACEMOUSE_LIBRARIES}
 )
 
 target_include_directories(
@@ -318,7 +327,6 @@ target_include_directories(
     ${QET_DIR}/sources/NameList
     ${QET_DIR}/sources/NameList/ui
     ${QET_DIR}/sources/utils
-    ${QET_DIR}/pugixml/src
     ${QET_DIR}/sources/dataBase
     ${QET_DIR}/sources/dataBase/ui
     ${QET_DIR}/sources/factory/ui

build-aux/snap/snapcraft.yaml

@@ -50,6 +50,7 @@ parts:
       - python3-lxml
       - python3-tk
       - libtk8.6
+      - libspnav0
 
   kde-sdk-setup:
     plugin: nil
@@ -92,6 +93,7 @@ parts:
       # runs FindCups at configure time and fails without the CUPS headers.
       # Build-time only: nothing from it is staged into the snap.
       - libcups2-dev
+      - libspnav-dev
     override-build: |
       displayed_version=$(cat sources/qetversion.cpp | grep "return QVersionNumber{"| head -n 1| awk -F "{" '{ print $2 }' | awk -F "}" '{ print $1 }' | sed -e 's/,/./g' -e 's/ //g')
       snap_version="${displayed_version}-g$(git rev-parse --short=8 HEAD)"
@@ -106,7 +108,8 @@ parts:
         -DBUILD_KF=OFF \
         -DPACKAGE_TESTS=OFF \
         -DBUILD_PUGIXML=ON \
-        -DQET_EXPORT_PROJECT_DB=ON
+        -DQET_EXPORT_PROJECT_DB=ON \
+        -DQET_ENABLE_SPACEMOUSE=ON
       ninja -C build -j${CRAFT_PARALLEL_BUILD_COUNT}
       DESTDIR="$CRAFT_PART_INSTALL" ninja -C build install
     override-stage: |

cmake/developer_options.cmake

@@ -47,3 +47,8 @@ option(BUILD_WITH_KF "Build with KDE Frameworks" ON)
 # compile for everyone else. Leaving it off keeps CI and contributors on the
 # strict behaviour, and only developers who opt in trade that for the speed.
 option(QET_ENABLE_PCH "Use precompiled headers (developer build speed; may mask missing #includes)" OFF)
+
+# Discussion #599: 3Dconnexion SpaceMouse/SpacePilot pan/zoom support. Off by
+# default -- see cmake/find_spacemouse.cmake for the backends and what happens
+# when it is on but no library is found.
+option(QET_ENABLE_SPACEMOUSE "Build with 3D mouse (3Dconnexion SpaceMouse) support for pan/zoom; needs libspnav or hidapi, see QET_SPACEMOUSE_BACKEND" OFF)

cmake/find_spacemouse.cmake

@@ -0,0 +1,83 @@
+# Copyright 2006 The QElectroTech Team
+# This file is part of QElectroTech.
+#
+# QElectroTech is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# QElectroTech is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with QElectroTech. If not, see <http://www.gnu.org/licenses/>.
+
+message(" - find_spacemouse")
+
+# QET_ENABLE_SPACEMOUSE (cmake/developer_options.cmake) is off by default,
+# so none of this runs, and the default build is entirely unaffected: no new
+# dependency, no new source files, no new symbols.
+#
+# When it is on, QET_SPACEMOUSE_BACKEND picks how the device is read -- see
+# sources/spacemouse/spacemousebackend.h for what a backend is:
+#   spnav  Linux, through the spacenavd daemon (libspnav)
+#   hid    any platform, directly over USB (hidapi), no 3Dconnexion driver
+#   auto   spnav on Linux when libspnav is found, hid otherwise
+# A backend whose library is not found downgrades the option to off with a
+# warning, rather than failing configure for an opt-in feature.
+set(QET_SPACEMOUSE_BACKEND "auto" CACHE STRING "3D mouse backend: auto, spnav or hid")
+set_property(CACHE QET_SPACEMOUSE_BACKEND PROPERTY STRINGS auto spnav hid)
+
+set(QET_SPACEMOUSE_ENABLED FALSE)
+set(QET_SPACEMOUSE_BACKEND_SPNAV_ENABLED FALSE)
+set(QET_SPACEMOUSE_BACKEND_HID_ENABLED FALSE)
+
+if(QET_ENABLE_SPACEMOUSE)
+    find_package(PkgConfig)
+
+    set(_qet_spacemouse_try_spnav FALSE)
+    set(_qet_spacemouse_try_hid FALSE)
+    if(QET_SPACEMOUSE_BACKEND STREQUAL "spnav")
+        set(_qet_spacemouse_try_spnav TRUE)
+    elseif(QET_SPACEMOUSE_BACKEND STREQUAL "hid")
+        set(_qet_spacemouse_try_hid TRUE)
+    else()
+        if(UNIX AND NOT APPLE)
+            set(_qet_spacemouse_try_spnav TRUE)
+        endif()
+        set(_qet_spacemouse_try_hid TRUE)
+    endif()
+
+    # libspnav: Debian/Ubuntu's libspnav-dev ships spnav.pc.
+    if(_qet_spacemouse_try_spnav AND PkgConfig_FOUND)
+        pkg_check_modules(SPNAV IMPORTED_TARGET spnav)
+        if(SPNAV_FOUND)
+            set(QET_SPACEMOUSE_ENABLED TRUE)
+            set(QET_SPACEMOUSE_BACKEND_SPNAV_ENABLED TRUE)
+            add_definitions(-DQET_SPACEMOUSE_BACKEND_SPNAV)
+            message("QET_ENABLE_SPACEMOUSE      ON  (backend: libspnav ${SPNAV_VERSION})")
+        endif()
+    endif()
+
+    # hidapi: hidapi-hidraw.pc on Linux (libhidapi-dev), hidapi.pc from
+    # MSYS2 (mingw-w64-ucrt-x86_64-hidapi) and Homebrew (hidapi).
+    if(NOT QET_SPACEMOUSE_ENABLED AND _qet_spacemouse_try_hid AND PkgConfig_FOUND)
+        pkg_search_module(HIDAPI IMPORTED_TARGET hidapi-hidraw hidapi)
+        if(HIDAPI_FOUND)
+            set(QET_SPACEMOUSE_ENABLED TRUE)
+            set(QET_SPACEMOUSE_BACKEND_HID_ENABLED TRUE)
+            add_definitions(-DQET_SPACEMOUSE_BACKEND_HID)
+            message("QET_ENABLE_SPACEMOUSE      ON  (backend: hidapi ${HIDAPI_VERSION})")
+        endif()
+    endif()
+
+    if(QET_SPACEMOUSE_ENABLED)
+        add_definitions(-DQET_SPACEMOUSE_SUPPORT)
+    else()
+        message(WARNING "QET_ENABLE_SPACEMOUSE is ON but no library was found for the "
+                         "'${QET_SPACEMOUSE_BACKEND}' backend (libspnav-dev for spnav, "
+                         "hidapi for hid, via pkg-config) -- building WITHOUT 3D mouse support.")
+    endif()
+endif()

cmake/paths_compilation_installation.cmake

@@ -62,7 +62,9 @@ if(WIN32)
   # puts the .qm files (see build-aux/windows/QElectroTech.wxs and the
   # windows-build workflow), and what the shortcuts pass as --lang-dir.
   set(QET_LANG_PATH               "lang/")
+  set(QET_EXAMPLES_PATH           "examples/")
   set(QET_LICENSE_PATH            "./")
+  set(QET_ICONS_PATH              "icons/hicolor/")
   # Liste des ressources Windows
 #RC_FILE = qelectrotech.rc
 endif()

cmake/qet_compilation_vars.cmake

@@ -297,6 +297,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/autoNum/numerotationcontextcommands.h
   ${QET_DIR}/sources/autoNum/numerotationcontext.cpp
   ${QET_DIR}/sources/autoNum/numerotationcontext.h
+  ${QET_DIR}/sources/autoNum/renumberelementscommand.cpp
+  ${QET_DIR}/sources/autoNum/renumberelementscommand.h
   ${QET_DIR}/sources/autoNum/ui/autonumberingdockwidget.cpp
   ${QET_DIR}/sources/autoNum/ui/autonumberingdockwidget.h
   ${QET_DIR}/sources/autoNum/ui/autonumberingmanagementw.cpp
@@ -307,11 +309,15 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/autoNum/ui/formulaautonumberingw.h
   ${QET_DIR}/sources/autoNum/ui/numparteditorw.cpp
   ${QET_DIR}/sources/autoNum/ui/numparteditorw.h
+  ${QET_DIR}/sources/autoNum/ui/renumberelementsdialog.cpp
+  ${QET_DIR}/sources/autoNum/ui/renumberelementsdialog.h
   ${QET_DIR}/sources/autoNum/ui/selectautonumw.cpp
   ${QET_DIR}/sources/autoNum/ui/selectautonumw.h
 
   ${QET_DIR}/sources/dataBase/projectdatabase.cpp
   ${QET_DIR}/sources/dataBase/projectdatabase.h
+  ${QET_DIR}/sources/dataBase/sqlreadonly.cpp
+  ${QET_DIR}/sources/dataBase/sqlreadonly.h
 
   ${QET_DIR}/sources/dataBase/ui/elementquerywidget.cpp
   ${QET_DIR}/sources/dataBase/ui/elementquerywidget.h
@@ -507,10 +513,6 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/PropertiesEditor/propertieseditorwidget.cpp
   ${QET_DIR}/sources/PropertiesEditor/propertieseditorwidget.h
 
-  ${QET_DIR}/pugixml/src/pugiconfig.hpp
-  ${QET_DIR}/pugixml/src/pugixml.cpp
-  ${QET_DIR}/pugixml/src/pugixml.hpp
-
   ${QET_DIR}/sources/qetgraphicsitem/conductor.cpp
   ${QET_DIR}/sources/qetgraphicsitem/conductor.h
   ${QET_DIR}/sources/qetgraphicsitem/conductortextitem.cpp
@@ -725,6 +727,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/ui/backupdialog.h
   ${QET_DIR}/sources/ui/dialogwaiting.cpp
   ${QET_DIR}/sources/ui/dialogwaiting.h
+  ${QET_DIR}/sources/ui/duplicateoffsetdialog.cpp
+  ${QET_DIR}/sources/ui/duplicateoffsetdialog.h
   ${QET_DIR}/sources/ui/dynamicelementtextitemeditor.cpp
   ${QET_DIR}/sources/ui/dynamicelementtextitemeditor.h
   ${QET_DIR}/sources/ui/dynamicelementtextmodel.cpp
@@ -871,6 +875,36 @@ list(APPEND QET_SRC_FILES
   ${QET_DIR}/sources/scripting/qetscripting.h
 )
 
+if(QET_SPACEMOUSE_ENABLED)
+  list(APPEND QET_SRC_FILES
+    ${QET_DIR}/sources/spacemouse/spacemousebackend.h
+    ${QET_DIR}/sources/spacemouse/spacemousebuttonmap.cpp
+    ${QET_DIR}/sources/spacemouse/spacemousebuttonmap.h
+    ${QET_DIR}/sources/spacemouse/spacemouselistener.cpp
+    ${QET_DIR}/sources/spacemouse/spacemouselistener.h
+    ${QET_DIR}/sources/spacemouse/spacemousemotion.cpp
+    ${QET_DIR}/sources/spacemouse/spacemousemotion.h
+    ${QET_DIR}/sources/ui/configpage/spacemouseconfigpage.cpp
+    ${QET_DIR}/sources/ui/configpage/spacemouseconfigpage.h
+  )
+endif()
+
+if(QET_SPACEMOUSE_BACKEND_SPNAV_ENABLED)
+  list(APPEND QET_SRC_FILES
+    ${QET_DIR}/sources/spacemouse/spnavbackend.cpp
+    ${QET_DIR}/sources/spacemouse/spnavbackend.h
+  )
+endif()
+
+if(QET_SPACEMOUSE_BACKEND_HID_ENABLED)
+  list(APPEND QET_SRC_FILES
+    ${QET_DIR}/sources/spacemouse/hidbackend.cpp
+    ${QET_DIR}/sources/spacemouse/hidbackend.h
+    ${QET_DIR}/sources/spacemouse/spacemousehid.cpp
+    ${QET_DIR}/sources/spacemouse/spacemousehid.h
+  )
+endif()
+
 set(TS_FILES
   ${QET_DIR}/lang/qet_ar.ts
   ${QET_DIR}/lang/qet_ca.ts

lang/phrase/qet_fr_ca.qph

@@ -0,0 +1,222 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="ca">
+<phrase>
+    <source>Réf. croisée</source>
+    <target>Ref. creuada</target>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>armari</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>bobina</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>born</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>bornes</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>cable</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>calibre</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>cartutx</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>champ de texte</source>
+    <target>camp de text</target>
+    <definition>text field</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>col·lecció</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>conductor</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>contacte</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>contactor</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>corrent</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>disjuntor</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>carpeta</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>element</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>esclau</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fil</source>
+    <target>fil</target>
+    <definition>wire</definition>
+</phrase>
+<phrase>
+    <source>folio</source>
+    <target>plec</target>
+    <definition>sheet - one drawing of a set</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>fusible</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>graella</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>interruptor</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>mestre</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>plantilla</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>motor</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>neutre</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>nomenclatura</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>numeració</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>fase</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>potencial</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>projecte</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>potència</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>relé</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>referència de plec</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>referència</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>remissió de plec</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>esquema</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>secció</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>sumari</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>tensió</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>terra</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>text</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>transformador</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_de.qph

@@ -100,4 +100,8 @@
     <source>traduction</source>
     <target>Übersetzung</target>
 </phrase>
+<phrase>
+    <source>Modifier le nom de la borne</source>
+    <target>Klemmenname ändern</target>
+</phrase>
 </QPH>

lang/phrase/qet_fr_en.qph

@@ -0,0 +1,918 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="en">
+<phrase>
+    <source>Blue : Blue</source>
+    <target>Blue : Blue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : CornflowerBlue</source>
+    <target>Blue : CornflowerBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : DarkBlue</source>
+    <target>Blue : DarkBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : DeepSkyBlue</source>
+    <target>Blue : DeepSkyBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : DodgerBlue</source>
+    <target>Blue : DodgerBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : LightBlue</source>
+    <target>Blue : LightBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : LightSkyBlue</source>
+    <target>Blue : LightSkyBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : LightSteelBlue</source>
+    <target>Blue : LightSteelBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : MediumBlue</source>
+    <target>Blue : MediumBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : MidnightBlue</source>
+    <target>Blue : MidnightBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : Navy</source>
+    <target>Blue : Navy</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : PowderBlue</source>
+    <target>Blue : PowderBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : RoyalBlue</source>
+    <target>Blue : RoyalBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : SkyBlue</source>
+    <target>Blue : SkyBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Blue : SteelBlue</source>
+    <target>Blue : SteelBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Bisque</source>
+    <target>Brown : Bisque</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : BlanchedAlmond</source>
+    <target>Brown : BlanchedAlmond</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Brown</source>
+    <target>Brown : Brown</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Burlywood</source>
+    <target>Brown : Burlywood</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Chocolate</source>
+    <target>Brown : Chocolate</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Cornsilk</source>
+    <target>Brown : Cornsilk</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : DarkGoldenrod</source>
+    <target>Brown : DarkGoldenrod</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Goldenrod</source>
+    <target>Brown : Goldenrod</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Maroon</source>
+    <target>Brown : Maroon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : NavajoWhite</source>
+    <target>Brown : NavajoWhite</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Peru</source>
+    <target>Brown : Peru</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : RosyBrown</source>
+    <target>Brown : RosyBrown</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : SaddleBrown</source>
+    <target>Brown : SaddleBrown</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : SandyBrown</source>
+    <target>Brown : SandyBrown</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Sienna</source>
+    <target>Brown : Sienna</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Tan</source>
+    <target>Brown : Tan</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Brown : Wheat</source>
+    <target>Brown : Wheat</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Aqua</source>
+    <target>Cyan : Aqua</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Aquamarine</source>
+    <target>Cyan : Aquamarine</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : CadetBlue</source>
+    <target>Cyan : CadetBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Cyan</source>
+    <target>Cyan : Cyan</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : DarkCyan</source>
+    <target>Cyan : DarkCyan</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : DarkTurquoise</source>
+    <target>Cyan : DarkTurquoise</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : LightCyan</source>
+    <target>Cyan : LightCyan</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : LightSeaGreen</source>
+    <target>Cyan : LightSeaGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : MediumTurquoise</source>
+    <target>Cyan : MediumTurquoise</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : PaleTurquoise</source>
+    <target>Cyan : PaleTurquoise</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Teal</source>
+    <target>Cyan : Teal</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Cyan : Turquoise</source>
+    <target>Cyan : Turquoise</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : Black</source>
+    <target>Gray : Black</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : DarkGray</source>
+    <target>Gray : DarkGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : DarkSlateGray</source>
+    <target>Gray : DarkSlateGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : DimGray</source>
+    <target>Gray : DimGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : Gainsboro</source>
+    <target>Gray : Gainsboro</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : Gray</source>
+    <target>Gray : Gray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : LightGray</source>
+    <target>Gray : LightGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : LightSlateGray</source>
+    <target>Gray : LightSlateGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : Silver</source>
+    <target>Gray : Silver</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Gray : SlateGray</source>
+    <target>Gray : SlateGray</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : Chartreuse</source>
+    <target>Green : Chartreuse</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : DarkGreen</source>
+    <target>Green : DarkGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : DarkOliveGreen</source>
+    <target>Green : DarkOliveGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : DarkSeaGreen</source>
+    <target>Green : DarkSeaGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : ForestGreen</source>
+    <target>Green : ForestGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : Green</source>
+    <target>Green : Green</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : GreenYellow</source>
+    <target>Green : GreenYellow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : LawnGreen</source>
+    <target>Green : LawnGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : LightGreen</source>
+    <target>Green : LightGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : Lime</source>
+    <target>Green : Lime</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : LimeGreen</source>
+    <target>Green : LimeGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : MediumAquamarine</source>
+    <target>Green : MediumAquamarine</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : MediumSeaGreen</source>
+    <target>Green : MediumSeaGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : MediumSpringGreen</source>
+    <target>Green : MediumSpringGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : Olive</source>
+    <target>Green : Olive</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : OliveDrab</source>
+    <target>Green : OliveDrab</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : PaleGreen</source>
+    <target>Green : PaleGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : SeaGreen</source>
+    <target>Green : SeaGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : SpringGreen</source>
+    <target>Green : SpringGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Green : YellowGreen</source>
+    <target>Green : YellowGreen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : Coral</source>
+    <target>Orange : Coral</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : DarkOrange</source>
+    <target>Orange : DarkOrange</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : Orange</source>
+    <target>Orange : Orange</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : OrangeRed</source>
+    <target>Orange : OrangeRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Orange : Tomato</source>
+    <target>Orange : Tomato</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : DeepPink</source>
+    <target>Pink: DeepPink</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : HotPink</source>
+    <target>Pink: HotPink</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : LightPink</source>
+    <target>Pink: LightPink</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : MediumVioletRed</source>
+    <target>Pink: MediumVioletRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : PaleVioletRed</source>
+    <target>Pink: PaleVioletRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Pink : Pink</source>
+    <target>Pink: Pink</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : BlueViolet</source>
+    <target>Purple : BlueViolet</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : DarkMagenta</source>
+    <target>Purple : DarkMagenta</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : DarkOrchid</source>
+    <target>Purple : DarkOrchid</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : DarkSlateBlue</source>
+    <target>Purple : DarkSlateBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : DarkViolet</source>
+    <target>Purple : DarkViolet</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Fuchsia</source>
+    <target>Purple : Fuchsia</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Indigo</source>
+    <target>Purple : Indigo</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Lavender</source>
+    <target>Purple : Lavender</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Magenta</source>
+    <target>Purple : Magenta</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : MediumOrchid</source>
+    <target>Purple : MediumOrchid</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : MediumPurple</source>
+    <target>Purple : MediumPurple</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : MediumSlateBlue</source>
+    <target>Purple : MediumSlateBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Orchid</source>
+    <target>Purple : Orchid</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Plum</source>
+    <target>Purple : Plum</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Purple</source>
+    <target>Purple : Purple</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : SlateBlue</source>
+    <target>Purple : SlateBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Thistle</source>
+    <target>Purple : Thistle</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Purple : Violet</source>
+    <target>Purple : Violet</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : Crimson</source>
+    <target>Red : Crimson</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : DarkRed</source>
+    <target>Red : DarkRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : DarkSalmon</source>
+    <target>Red: DarkSalmon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : Firebrick</source>
+    <target>Red : Firebrick</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : IndianRed</source>
+    <target>Red: IndianRed</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : LightCoral</source>
+    <target>Red: LightCoral</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : LightSalmon</source>
+    <target>Red: LightSalmon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : Red</source>
+    <target>Red : Red</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Red : Salmon</source>
+    <target>Red: Salmon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : AliceBlue</source>
+    <target>White : AliceBlue</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : AntiqueWhite</source>
+    <target>White : AntiqueWhite</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Azure</source>
+    <target>White : Azure</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Beige</source>
+    <target>White : Beige</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : FloralWhite</source>
+    <target>White : FloralWhite</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : GhostWhite</source>
+    <target>White : GhostWhite</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Honeydew</source>
+    <target>White : Honeydew</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Ivory</source>
+    <target>White : Ivory</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : LavenderBlush</source>
+    <target>White : LavenderBlush</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Linen</source>
+    <target>White : Linen</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : MintCream</source>
+    <target>White : MintCream</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : MistyRose</source>
+    <target>White : MistyRose</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : OldLace</source>
+    <target>White : OldLace</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Seashell</source>
+    <target>White : Seashell</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : Snow</source>
+    <target>White : Snow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : White</source>
+    <target>White : White</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>White : WhiteSmoke</source>
+    <target>White : WhiteSmoke</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : DarkKhaki</source>
+    <target>Yellow : DarkKhaki</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : Gold</source>
+    <target>Yellow : Gold</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : Khaki</source>
+    <target>Yellow : Khaki</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : LemonChiffon</source>
+    <target>Yellow : LemonChiffon</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : LightGoldenrodYellow</source>
+    <target>Yellow : LightGoldenrodYellow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : LightYellow</source>
+    <target>Yellow : LightYellow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : Moccasin</source>
+    <target>Yellow : Moccasin</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : PaleGoldenrod</source>
+    <target>Yellow : PaleGoldenrod</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : PapayaWhip</source>
+    <target>Yellow : PapayaWhip</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : PeachPuff</source>
+    <target>Yellow : PeachPuff</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>Yellow : Yellow</source>
+    <target>Yellow : Yellow</target>
+    <definition>element part filling</definition>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>cabinet</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>coil</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>terminal</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>terminal strip</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>cable</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>rating</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>title block</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>champ de texte</source>
+    <target>text field</target>
+    <definition>text field</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>collection</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>conductor</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>contact</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>contactor</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>current</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>circuit breaker</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>folder</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>element</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>slave</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fil</source>
+    <target>wire</target>
+    <definition>wire</definition>
+</phrase>
+<phrase>
+    <source>folio</source>
+    <target>sheet</target>
+    <definition>sheet - one drawing of a set</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>fuse</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>grid</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>switch</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>master</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>template</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>motor</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>neutral</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>parts list</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>numbering</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>phase</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>potential</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>project</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>power</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>relay</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>sheet cross-reference</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>designation</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>sheet cross-reference</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>diagram</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>cross-section</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>summary</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>voltage</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>earth</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>text</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>transformer</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_nl_BE.qph

@@ -0,0 +1,941 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="nl_BE">
+<phrase>
+    <source>    Contacts : NO : %1, NC : %2, inverseurs : %3, autres : %4
+</source>
+    <target>Contacten: NO: %1, NC: %2, wisselcontacten: %3, andere: %4
+</target>
+</phrase>
+<phrase>
+    <source>    Contacts : NO : %1/%2, NC : %3/%4, inverseurs : %5/%6, autres : %7/%8
+</source>
+    <target>Contacten: NO: %1/%2, NC: %3/%4, wisselcontacten: %5/%6, andere: %7/%8
+</target>
+</phrase>
+<phrase>
+    <source> %</source>
+    <target>%</target>
+</phrase>
+<phrase>
+    <source> (Ctrl pendant le glissement = position libre, sans accrochage à la grille)</source>
+    <target>(Ctrl tijdens het slepen = vrije positie, zonder vastklikken aan het raster)</target>
+</phrase>
+<phrase>
+    <source> -- %1 : mode %2</source>
+    <target>-- %1 : modus %2</target>
+</phrase>
+<phrase>
+    <source> ; point rouge : glisser pour repositionner le centre de rotation</source>
+    <target>; rood punt: slepen om het draaipunt te verplaatsen</target>
+</phrase>
+<phrase>
+    <source> ; point turquoise : arc</source>
+    <target>; turquoise punt: boog</target>
+</phrase>
+<phrase>
+    <source> ; un bord : inclinaison</source>
+    <target>; een rand: kanteling</target>
+</phrase>
+<phrase>
+    <source> °</source>
+    <target>°</target>
+</phrase>
+<phrase>
+    <source> — Cliquer : mode %1</source>
+    <target>— Klikken: modus %1</target>
+</phrase>
+<phrase>
+    <source>, Alt = créer des poignées</source>
+    <target>, Alt = handgrepen creëren</target>
+</phrase>
+<phrase>
+    <source>, Alt = détacher en polyligne</source>
+    <target>, Alt = losmaken als polylijn</target>
+</phrase>
+<phrase>
+    <source>Ajoute une courbe de Bézier sur le folio actuel</source>
+    <target>Voegt een Béziercurve toe op het huidige blad</target>
+</phrase>
+<phrase>
+    <source>Ajouter la borne %1</source>
+    <target>Klem %1 toevoegen</target>
+</phrase>
+<phrase>
+    <source>Ajouter un point à une courbe</source>
+    <target>Een punt aan een curve toevoegen</target>
+</phrase>
+<phrase>
+    <source>Ajouter une courbe</source>
+    <target>Een curve toevoegen</target>
+</phrase>
+<phrase>
+    <source>Angle</source>
+    <target>Hoek</target>
+</phrase>
+<phrase>
+    <source>Anguleux</source>
+    <target>Hoekig</target>
+</phrase>
+<phrase>
+    <source>Aperçu</source>
+    <target>Voorbeeld</target>
+</phrase>
+<phrase>
+    <source>Arrondir les coins d&apos;%1</source>
+    <target>Hoeken van %1 afronden</target>
+</phrase>
+<phrase>
+    <source>Borne 1</source>
+    <target>Klem 1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Borne 2</source>
+    <target>Klem 2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Catégorie</source>
+    <target>Categorie</target>
+</phrase>
+<phrase>
+    <source>Ce format ne prend pas en charge la transparence : l&apos;image sera enregistrée telle qu&apos;elle était avant l&apos;application de la couleur transparente. Continuer ?</source>
+    <target>Dit formaat ondersteunt geen transparantie: de afbeelding wordt opgeslagen zoals ze was vóór het toepassen van de transparante kleur. Doorgaan?</target>
+</phrase>
+<phrase>
+    <source>Champ de texte</source>
+    <target>Tekstveld</target>
+</phrase>
+<phrase>
+    <source>Clic : positionner à la taille d&apos;origine. Cliquer-glisser : positionner et redimensionner. Clic droit : pivoter de 90°. Ctrl+molette : ajuster la taille.</source>
+    <target>Klik: op oorspronkelijke grootte plaatsen. Klikken en slepen: plaatsen en formaat wijzigen. Rechtsklik: 90° draaien. Ctrl+muiswiel: formaat aanpassen.</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : point suivant ; double-clic ou Entrée : terminer ; clic droit : annuler le dernier point</source>
+    <target>Linkerklik: volgend punt; dubbelklik of Enter: beëindigen; rechtsklik: laatste punt annuleren</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le coin opposé (Maj = carré, Ctrl = depuis le centre + position libre, Ctrl+Maj = carré centré) ; clic droit : annuler</source>
+    <target>Linkerklik: tegenoverliggende hoek plaatsen (Shift = vierkant, Ctrl = vanuit het midden + vrije positie, Ctrl+Shift = gecentreerd vierkant); rechtsklik: annuleren</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le coin opposé (Maj = cercle, Ctrl = depuis le centre + position libre, Ctrl+Maj = cercle centré) ; clic droit : annuler</source>
+    <target>Linkerklik: tegenoverliggende hoek plaatsen (Shift = cirkel, Ctrl = vanuit het midden + vrije positie, Ctrl+Shift = gecentreerde cirkel); rechtsklik: annuleren</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le point de départ (Ctrl = position libre)</source>
+    <target>Linkerklik: startpunt plaatsen (Ctrl = vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le point final (Ctrl = position libre) ; clic droit : annuler</source>
+    <target>Linkerklik: eindpunt plaatsen (Ctrl = vrije positie); rechtsklik: annuleren</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le premier coin (Ctrl = point central, position libre)</source>
+    <target>Linkerklik: eerste hoek plaatsen (Ctrl = middelpunt, vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le premier point (Ctrl = position libre)</source>
+    <target>Linkerklik: eerste punt plaatsen (Ctrl = vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Clic: point anguleux. Cliquer-glisser: point courbe. Clic sur le premier point: fermer. Échap/Entrée: terminer. Clic droit: annuler le dernier point.</source>
+    <target>Klik: hoekpunt. Klikken en slepen: curvepunt. Klik op het eerste punt: sluiten. Esc/Enter: beëindigen. Rechtsklik: laatste punt annuleren.</target>
+</phrase>
+<phrase>
+    <source>Cliquer</source>
+    <target>Klikken</target>
+</phrase>
+<phrase>
+    <source>Cliquer : mode %1</source>
+    <target>Klikken: modus %1</target>
+</phrase>
+<phrase>
+    <source>Cliquez pour choisir une couleur</source>
+    <target>Klik om een kleur te kiezen</target>
+</phrase>
+<phrase>
+    <source>Cliquez sur l&apos;image pour ajouter une couleur. Ajustez la tolérance de chaque couleur avec son curseur, ou cliquez sur × pour la retirer.</source>
+    <target>Klik op de afbeelding om een kleur toe te voegen. Pas de tolerantie van elke kleur aan met de schuifregelaar, of klik op × om ze te verwijderen.</target>
+</phrase>
+<phrase>
+    <source>Cliquez sur l&apos;image pour choisir une couleur</source>
+    <target>Klik op de afbeelding om een kleur te kiezen</target>
+</phrase>
+<phrase>
+    <source>Coins arrondis</source>
+    <target>Afgeronde hoeken</target>
+</phrase>
+<phrase>
+    <source>Composant 1</source>
+    <target>Component 1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Composant 2</source>
+    <target>Component 2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Convertir %1 en courbe de Bézier</source>
+    <target>%1 omzetten naar Béziercurve</target>
+</phrase>
+<phrase>
+    <source>Convertir %1 en polyligne</source>
+    <target>%1 omzetten naar polylijn</target>
+</phrase>
+<phrase>
+    <source>Convertir en courbe de Bézier</source>
+    <target>Omzetten naar Béziercurve</target>
+</phrase>
+<phrase>
+    <source>Convertir en polyligne</source>
+    <target>Omzetten naar polylijn</target>
+</phrase>
+<phrase>
+    <source>Couleur transparente</source>
+    <target>Transparante kleur</target>
+</phrase>
+<phrase>
+    <source>Couleur transparente...</source>
+    <target>Transparante kleur...</target>
+</phrase>
+<phrase>
+    <source>Courant nominal</source>
+    <target>Nominale stroom</target>
+</phrase>
+<phrase>
+    <source>Deplacer le centre de rotation</source>
+    <target>Draaipunt verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Description</source>
+    <target>Beschrijving</target>
+</phrase>
+<phrase>
+    <source>Distance in pixels between the label and the slave cross reference</source>
+    <target>Afstand in pixels tussen het label en de slave-kruisverwijzing</target>
+</phrase>
+<phrase>
+    <source>Distance label - slave :</source>
+    <target>Afstand label - slave:</target>
+</phrase>
+<phrase>
+    <source>Définir une couleur transparente</source>
+    <target>Een transparante kleur instellen</target>
+</phrase>
+<phrase>
+    <source>Déformer une courbe</source>
+    <target>Een curve vervormen</target>
+</phrase>
+<phrase>
+    <source>Déplacer le centre de rotation d&apos;une image</source>
+    <target>Het draaipunt van een afbeelding verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Déverrouillé : largeur et hauteur peuvent être modifiées indépendamment. Cliquer pour verrouiller.</source>
+    <target>Ontgrendeld: breedte en hoogte kunnen onafhankelijk worden gewijzigd. Klik om te vergrendelen.</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image d&apos;origine sous...</source>
+    <target>Oorspronkelijke afbeelding opslaan als...</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image sous...</source>
+    <target>Afbeelding opslaan als...</target>
+</phrase>
+<phrase>
+    <source>Erreur</source>
+    <target>Fout</target>
+</phrase>
+<phrase>
+    <source>Exclure de la nomenclature</source>
+    <target>Uitsluiten van de stuklijst</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter %1</source>
+    <target>%1 roteren</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter une image</source>
+    <target>Een afbeelding draaien</target>
+</phrase>
+<phrase>
+    <source>Faites glisser les poignées, ou l&apos;intérieur du cadre, pour ajuster la zone à conserver.</source>
+    <target>Sleep de handgrepen, of het binnenste van het kader, om het te behouden gebied aan te passen.</target>
+</phrase>
+<phrase>
+    <source>Fil</source>
+    <target>Draad</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Folio</source>
+    <target>Blad</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Forme fermée</source>
+    <target>Gesloten vorm</target>
+</phrase>
+<phrase>
+    <source>Glisser %1 : rotation (Maj = 15°)</source>
+    <target>Sleep %1: rotatie (Shift = 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : ajuster l&apos;arc (Ctrl = position libre, Maj = 15°)</source>
+    <target>Slepen: de boog aanpassen (Ctrl = vrije positie, Shift = 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : arrondir les coins (Ctrl = position libre)</source>
+    <target>Slepen: hoeken afronden (Ctrl = vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Glisser : déformer la courbe (Ctrl = position libre, Alt = briser la tangente)</source>
+    <target>Slepen: de curve vervormen (Ctrl = vrije positie, Alt = de raaklijn breken)</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer ce point</source>
+    <target>Slepen: dit punt verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer le centre de rotation</source>
+    <target>Slepen: draaipunt verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer le point (Ctrl = position libre</source>
+    <target>Slepen: het punt verplaatsen (Ctrl = vrije positie</target>
+</phrase>
+<phrase>
+    <source>Glisser : inclinaison (Ctrl = position libre, Maj = 15°)</source>
+    <target>Slepen: kanteling (Ctrl = vrije positie, Shift = 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : incliner (Maj = par pas de 15°)</source>
+    <target>Slepen: kantelen (Shift = stappen van 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : pivoter (Maj = par pas de 15°)</source>
+    <target>Slepen: draaien (Shift = stappen van 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser : redimensionner (Ctrl = depuis le centre + position libre, Maj = proportions</source>
+    <target>Slepen: formaat wijzigen (Ctrl = vanuit het midden + vrije positie, Shift = verhoudingen</target>
+</phrase>
+<phrase>
+    <source>Glisser : redimensionner (Maj = conserver les proportions, Ctrl = depuis le centre)</source>
+    <target>Slepen: formaat wijzigen (Shift = verhoudingen behouden, Ctrl = vanuit het midden)</target>
+</phrase>
+<phrase>
+    <source>Glisser : repositionner le centre de rotation (Ctrl = position libre)</source>
+    <target>Slepen: het draaipunt verplaatsen (Ctrl = vrije positie)</target>
+</phrase>
+<phrase>
+    <source>Glisser : rotation (Ctrl = position libre, Maj = 15°)</source>
+    <target>Slepen: rotatie (Ctrl = vrije positie, Shift = 15°)</target>
+</phrase>
+<phrase>
+    <source>Glisser le point violet : arrondir les coins</source>
+    <target>Sleep het paarse punt: hoeken afronden</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin : pivoter (Maj = par pas de 15°) ; glisser un bord : incliner (Maj = par pas de 15°) ; point rouge : déplacer le centre de rotation</source>
+    <target>Sleep een hoek: draaien (Shift = stappen van 15°); sleep een rand: kantelen (Shift = stappen van 15°); rood punt: draaipunt verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin/bord : redimensionner (Ctrl = depuis le centre, Maj = conserver les proportions)</source>
+    <target>Sleep een hoek/rand: formaat wijzigen (Ctrl = vanuit het midden, Shift = verhoudingen behouden)</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin/bord : redimensionner (Ctrl = depuis le centre, Maj = proportions, Alt = détacher en polyligne)</source>
+    <target>Sleep een hoek/rand: formaat wijzigen (Ctrl = vanuit het midden, Shift = verhoudingen, Alt = losmaken als polylijn)</target>
+</phrase>
+<phrase>
+    <source>Glisser un point : le déplacer</source>
+    <target>Sleep een punt: het verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser une extrémité : la déplacer</source>
+    <target>Sleep een uiteinde: het verplaatsen</target>
+</phrase>
+<phrase>
+    <source>Glisser une poignée ou la courbe : déformer (Alt = briser la tangente) ; Alt+glisser un point anguleux : créer des poignées ; clic droit : menu du nœud le plus proche</source>
+    <target>Sleep een handgreep of de curve: vervormen (Alt = de raaklijn breken); Alt+sleep een hoekpunt: handgrepen creëren; rechtsklik: menu van het dichtstbijzijnde knooppunt</target>
+</phrase>
+<phrase>
+    <source>Géométrie</source>
+    <target>Geometrie</target>
+</phrase>
+<phrase>
+    <source>Hauteur</source>
+    <target>Hoogte</target>
+</phrase>
+<phrase>
+    <source>Image BMP (*.bmp)</source>
+    <target>BMP-afbeelding (*.bmp)</target>
+</phrase>
+<phrase>
+    <source>Image Files (*.png *.jpg *.jpeg *.bmp *.svg)</source>
+    <target>Afbeeldingsbestanden (*.png *.jpg *.jpeg *.bmp *.svg)</target>
+</phrase>
+<phrase>
+    <source>Image JPEG (*.jpg *.jpeg)</source>
+    <target>JPEG-afbeelding (*.jpg *.jpeg)</target>
+</phrase>
+<phrase>
+    <source>Image PNG (*.png)</source>
+    <target>PNG-afbeelding (*.png)</target>
+</phrase>
+<phrase>
+    <source>Image source</source>
+    <target>Bronafbeelding</target>
+</phrase>
+<phrase>
+    <source>Image SVG (*.svg)</source>
+    <target>SVG-afbeelding (*.svg)</target>
+</phrase>
+<phrase>
+    <source>Images non incluses dans l&apos;export DXF</source>
+    <target>Afbeeldingen niet inbegrepen in de DXF-export</target>
+    <definition>message box title</definition>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer l&apos;image à cet emplacement.</source>
+    <target>Kan de afbeelding niet op die locatie opslaan.</target>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer la nomenclature dans %1.
+%2</source>
+    <target>Kan de stuklijst niet opslaan in %1.
+%2</target>
+</phrase>
+<phrase>
+    <source>Impossible de charger l&apos;image.</source>
+    <target>Kan de afbeelding niet laden.</target>
+</phrase>
+<phrase>
+    <source>Inclinaison X</source>
+    <target>Kanteling X</target>
+</phrase>
+<phrase>
+    <source>Inclinaison Y</source>
+    <target>Kanteling Y</target>
+</phrase>
+<phrase>
+    <source>Incliner %1</source>
+    <target>%1 kantelen</target>
+</phrase>
+<phrase>
+    <source>Incliner une image</source>
+    <target>Een afbeelding kantelen</target>
+</phrase>
+<phrase>
+    <source>La limite fixée pour cet élément maître est atteinte (Limite: %1).
+
+Voulez-vous tout de même lier ce contact esclave ?</source>
+    <target>De limiet voor dit hoofdelement is bereikt (Limiet: %1).
+
+Wilt u dit hulpcontact toch koppelen?</target>
+</phrase>
+<phrase>
+    <source>Largeur</source>
+    <target>Breedte</target>
+</phrase>
+<phrase>
+    <source>Le format DXF utilisé ici (AC1006) ne permet pas d&apos;inclure d&apos;image. Les images seront représentées uniquement par un rectangle de contour (position, taille, rotation et inclinaison conservées), sans le contenu de l&apos;image.</source>
+    <target>Het hier gebruikte DXF-formaat (AC1006) laat niet toe afbeeldingen op te nemen. Afbeeldingen worden enkel voorgesteld door een omtrekrechthoek (positie, grootte, rotatie en kanteling behouden), zonder de inhoud van de afbeelding.</target>
+    <definition>message box content</definition>
+</phrase>
+<phrase>
+    <source>Lisse</source>
+    <target>Vloeiend</target>
+</phrase>
+<phrase>
+    <source>Liste de câblage</source>
+    <target>Bekabelingslijst</target>
+    <definition>window title</definition>
+</phrase>
+<phrase>
+    <source>Liste de câblage (base de données)</source>
+    <target>Bekabelingslijst (database)</target>
+</phrase>
+<phrase>
+    <source>Localisation :</source>
+    <target>Locatie:</target>
+</phrase>
+<phrase>
+    <source>Longueur</source>
+    <target>Lengte</target>
+</phrase>
+<phrase>
+    <source>margin: 5px; font-weight: bold;</source>
+    <target>margin: 5px; font-weight: bold;</target>
+</phrase>
+<phrase>
+    <source>max:</source>
+    <target>max:</target>
+</phrase>
+<phrase>
+    <source>min:</source>
+    <target>min:</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal</source>
+    <target>Horizontaal spiegelen</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal d&apos;une image</source>
+    <target>Horizontaal spiegelen van een afbeelding</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal de %1</source>
+    <target>Horizontaal spiegelen van %1</target>
+</phrase>
+<phrase>
+    <source>Miroir impossible : inclinaison trop extrême pour cette forme</source>
+    <target>Spiegelen onmogelijk: kanteling te extreem voor deze vorm</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical</source>
+    <target>Verticaal spiegelen</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical d&apos;une image</source>
+    <target>Verticaal spiegelen van een afbeelding</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical de %1</source>
+    <target>Verticaal spiegelen van %1</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;un arc</source>
+    <target>Hoek van een boog wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;une forme</source>
+    <target>Hoek van een vorm wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;une image</source>
+    <target>De hoek van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;inclinaison d&apos;une image</source>
+    <target>De kanteling van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la courbure d&apos;%1</source>
+    <target>Kromming van %1 wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la forme d&apos;%1</source>
+    <target>Vorm van %1 wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la hauteur d&apos;une image</source>
+    <target>De hoogte van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la largeur d&apos;une image</source>
+    <target>De breedte van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la longueur d&apos;une ligne</source>
+    <target>Lengte van een lijn wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier la taille d&apos;une forme</source>
+    <target>Grootte van een vorm wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier le type d&apos;un nœud</source>
+    <target>Het type van een knooppunt wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modifier une image</source>
+    <target>Een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Modèle</source>
+    <target>Model</target>
+</phrase>
+<phrase>
+    <source>Nombre maximum de contacts esclaves définis : non défini
+</source>
+    <target>Maximumaantal gedefinieerde hulpcontacten: niet gedefinieerd
+</target>
+</phrase>
+<phrase>
+    <source>Notes</source>
+    <target>Notities</target>
+</phrase>
+<phrase>
+    <source>Nœud le plus proche</source>
+    <target>Dichtstbijzijnde knooppunt</target>
+</phrase>
+<phrase>
+    <source>pivoter/incliner</source>
+    <target>draaien/kantelen</target>
+</phrase>
+<phrase>
+    <source>Ponter des bornes entre-elles</source>
+    <target>Klemmen onderling doorverbinden</target>
+</phrase>
+<phrase>
+    <source>Rayon X</source>
+    <target>Straal X</target>
+</phrase>
+<phrase>
+    <source>Rayon Y</source>
+    <target>Straal Y</target>
+</phrase>
+<phrase>
+    <source>redimensionner</source>
+    <target>formaat wijzigen</target>
+</phrase>
+<phrase>
+    <source>Redimensionner %1</source>
+    <target>%1 vergroten/verkleinen</target>
+</phrase>
+<phrase>
+    <source>Redimensionner une image</source>
+    <target>Formaat van een afbeelding wijzigen</target>
+</phrase>
+<phrase>
+    <source>Remplacer l&apos;image...</source>
+    <target>Afbeelding vervangen...</target>
+</phrase>
+<phrase>
+    <source>Remplacer une image</source>
+    <target>Een afbeelding vervangen</target>
+</phrase>
+<phrase>
+    <source>Restaurer les proportions</source>
+    <target>Verhoudingen herstellen</target>
+</phrase>
+<phrase>
+    <source>Restaurer les proportions d&apos;une image</source>
+    <target>De verhoudingen van een afbeelding herstellen</target>
+</phrase>
+<phrase>
+    <source>Retirer cette couleur</source>
+    <target>Deze kleur verwijderen</target>
+</phrase>
+<phrase>
+    <source>Revenir à l&apos;image complète, sans rognage</source>
+    <target>Terug naar de volledige afbeelding, zonder bijsnijden</target>
+</phrase>
+<phrase>
+    <source>rgb(%1, %2, %3)</source>
+    <target>rgb(%1, %2, %3)</target>
+</phrase>
+<phrase>
+    <source>Rogner l&apos;image</source>
+    <target>Afbeelding bijsnijden</target>
+</phrase>
+<phrase>
+    <source>Rogner une image</source>
+    <target>Een afbeelding bijsnijden</target>
+</phrase>
+<phrase>
+    <source>Rogner...</source>
+    <target>Bijsnijden...</target>
+</phrase>
+<phrase>
+    <source>Rotation/Inclinaison</source>
+    <target>Rotatie/kanteling</target>
+</phrase>
+<phrase>
+    <source>Réinitialiser</source>
+    <target>Herinitialiseren</target>
+</phrase>
+<phrase>
+    <source>Selectionner une image...</source>
+    <target>Een afbeelding selecteren...</target>
+</phrase>
+<phrase>
+    <source>Supprimer le nœud le plus proche</source>
+    <target>Het dichtstbijzijnde knooppunt verwijderen</target>
+</phrase>
+<phrase>
+    <source>Supprimer un point d&apos;une courbe</source>
+    <target>Een punt van een curve verwijderen</target>
+</phrase>
+<phrase>
+    <source>Symétrique</source>
+    <target>Symmetrisch</target>
+</phrase>
+<phrase>
+    <source>Séparation de potentiel</source>
+    <target>Potentiaalscheiding</target>
+</phrase>
+<phrase>
+    <source>Taille</source>
+    <target>Grootte</target>
+</phrase>
+<phrase>
+    <source>Tension nominale</source>
+    <target>Nominale spanning</target>
+</phrase>
+<phrase>
+    <source>Tolérance pour cette couleur</source>
+    <target>Tolerantie voor deze kleur</target>
+</phrase>
+<phrase>
+    <source>Tous les fichiers (*)</source>
+    <target>Alle bestanden (*)</target>
+</phrase>
+<phrase>
+    <source>Transformer %1</source>
+    <target>%1 omvormen</target>
+</phrase>
+<phrase>
+    <source>Transparence non conservée</source>
+    <target>Transparantie niet behouden</target>
+</phrase>
+<phrase>
+    <source>un arc</source>
+    <target>een boog</target>
+</phrase>
+<phrase>
+    <source>un coin</source>
+    <target>een hoek</target>
+</phrase>
+<phrase>
+    <source>un point</source>
+    <target>een punt</target>
+</phrase>
+<phrase>
+    <source>une courbe</source>
+    <target>een curve</target>
+</phrase>
+<phrase>
+    <source>une extrémité</source>
+    <target>een uiteinde</target>
+</phrase>
+<phrase>
+    <source>une image</source>
+    <target>een afbeelding</target>
+    <definition>part of a sentence listing the content of a diagram</definition>
+</phrase>
+<phrase>
+    <source>Verrouiller la numérotation automatique</source>
+    <target>Automatische nummering vergrendelen</target>
+</phrase>
+<phrase>
+    <source>Verrouiller la position</source>
+    <target>Positie vergrendelen</target>
+</phrase>
+<phrase>
+    <source>Verrouillé : modifier la largeur ou la hauteur ajuste l&apos;autre pour conserver les proportions. Cliquer pour déverrouiller.</source>
+    <target>Vergrendeld: het wijzigen van de breedte of hoogte past de andere aan om de verhoudingen te behouden. Klik om te ontgrendelen.</target>
+</phrase>
+<phrase>
+    <source>Échec de l&apos;enregistrement</source>
+    <target>Opslaan mislukt</target>
+</phrase>
+<phrase>
+    <source>Édition des nœuds</source>
+    <target>Knooppunten bewerken</target>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>kast</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>spoel</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>klem</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>klemmenstrook</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>kabel</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>kaliber</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>titelblok</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>collectie</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>geleider</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>contact</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>contacteur</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>stroom</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>automaat</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>map</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>element</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>hulpcontact</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>zekering</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>raster</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>schakelaar</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>hoofd</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>sjabloon</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>motor</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>nul</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>stuklijst</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>nummering</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>fase</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>potentiaal</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>project</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>vermogen</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>relais</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>bladverwijzing</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>aanduiding</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>bladverwijzing</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>schema</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>doorsnede</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>inhoudstafel</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>spanning</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>aarde</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>tekst</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>transformator</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_pl.qph

@@ -0,0 +1,218 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="pl">
+<phrase>
+    <source>armoire</source>
+    <target>Szafa</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>Cewka</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>Zacisk</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>Listwa zaciskowa</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>Kabel</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>Prąd znamionowy</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>Tabliczka rysunkowa</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>champ de texte</source>
+    <target>Pole tekstowe</target>
+    <definition>text field</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>Biblioteka</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>Przewód</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>Styk</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>Stycznik</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>Prąd</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>Wyłącznik nadprądowy</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>Folder</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>Element</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>Element podrzędny</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fil</source>
+    <target>Przewód</target>
+    <definition>wire</definition>
+</phrase>
+<phrase>
+    <source>folio</source>
+    <target>Arkusz</target>
+    <definition>sheet - one drawing of a set</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>Bezpiecznik</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>Siatka</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>Wyłącznik</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>Element główny</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>Szablon</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>Silnik</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>Neutralny</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>Zestawienie materiałów</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>Numeracja</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>Faza</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>Potencjał</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>Projekt</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>Moc</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>Przekaźnik</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>Odnośnik do arkusza</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>Oznaczenie</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>Odnośnik do arkusza</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>Schemat</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>Przekrój</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>Spis treści</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>Napięcie</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>Uziemienie</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>Tekst</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>Transformator</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_pt_BR.qph

@@ -0,0 +1,465 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="pt_BR">
+<phrase>
+    <source>    Contacts : NO : %1, NC : %2, inverseurs : %3, autres : %4
+</source>
+    <target>Contatos: NA: %1, NF: %2, reversíveis: %3, outros: %4
+</target>
+</phrase>
+<phrase>
+    <source>    Contacts : NO : %1/%2, NC : %3/%4, inverseurs : %5/%6, autres : %7/%8
+</source>
+    <target>Contatos: NA: %1/%2, NF: %3/%4, reversíveis: %5/%6, outros: %7/%8
+</target>
+</phrase>
+<phrase>
+    <source>Aperçu</source>
+    <target>Pré-visualização</target>
+</phrase>
+<phrase>
+    <source>Arrondir les coins d&apos;%1</source>
+    <target>Arredondar os cantos de %1</target>
+</phrase>
+<phrase>
+    <source>Borne 1</source>
+    <target>Borne 1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Borne 2</source>
+    <target>Borne 2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Catégorie</source>
+    <target>Categoria</target>
+</phrase>
+<phrase>
+    <source>Ce format ne prend pas en charge la transparence : l&apos;image sera enregistrée telle qu&apos;elle était avant l&apos;application de la couleur transparente. Continuer ?</source>
+    <target>Este formato não suporta transparência: a imagem será salva como estava antes da aplicação da cor transparente. Continuar?</target>
+</phrase>
+<phrase>
+    <source>Champ de texte</source>
+    <target>Campo de texto</target>
+</phrase>
+<phrase>
+    <source>Composant 1</source>
+    <target>Componente 1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Composant 2</source>
+    <target>Componente 2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Convertir %1 en courbe de Bézier</source>
+    <target>Converter %1 em curva de Bézier</target>
+</phrase>
+<phrase>
+    <source>Convertir en courbe de Bézier</source>
+    <target>Converter em curva de Bézier</target>
+</phrase>
+<phrase>
+    <source>Courant nominal</source>
+    <target>Corrente nominal</target>
+</phrase>
+<phrase>
+    <source>Distance in pixels between the label and the slave cross reference</source>
+    <target>Distância em pixels entre o rótulo e a referência cruzada do escravo</target>
+</phrase>
+<phrase>
+    <source>Distance label - slave :</source>
+    <target>Distância do rótulo - escravo:</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image d&apos;origine sous...</source>
+    <target>Salvar a imagem original como...</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image sous...</source>
+    <target>Salvar a imagem como...</target>
+</phrase>
+<phrase>
+    <source>Erreur</source>
+    <target>Erro</target>
+</phrase>
+<phrase>
+    <source>Exclure de la nomenclature</source>
+    <target>Excluir da lista de materiais</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter %1</source>
+    <target>Girar %1</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter une image</source>
+    <target>Girar uma imagem</target>
+</phrase>
+<phrase>
+    <source>Fil</source>
+    <target>Fio</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Folio</source>
+    <target>Folha</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Hauteur</source>
+    <target>Altura</target>
+</phrase>
+<phrase>
+    <source>Image BMP (*.bmp)</source>
+    <target>Imagem BMP (*.bmp)</target>
+</phrase>
+<phrase>
+    <source>Image JPEG (*.jpg *.jpeg)</source>
+    <target>Imagem JPEG (*.jpg *.jpeg)</target>
+</phrase>
+<phrase>
+    <source>Image PNG (*.png)</source>
+    <target>Imagem PNG (*.png)</target>
+</phrase>
+<phrase>
+    <source>Image SVG (*.svg)</source>
+    <target>Imagem SVG (*.svg)</target>
+</phrase>
+<phrase>
+    <source>Images non incluses dans l&apos;export DXF</source>
+    <target>Imagens não incluídas na exportação DXF</target>
+    <definition>message box title</definition>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer l&apos;image à cet emplacement.</source>
+    <target>Não foi possível salvar a imagem neste local.</target>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer la nomenclature dans %1.
+%2</source>
+    <target>Não foi possível salvar a lista de materiais em %1.
+%2</target>
+</phrase>
+<phrase>
+    <source>Impossible de charger l&apos;image.</source>
+    <target>Não foi possível carregar a imagem.</target>
+</phrase>
+<phrase>
+    <source>Incliner %1</source>
+    <target>Inclinar %1</target>
+</phrase>
+<phrase>
+    <source>Incliner une image</source>
+    <target>Inclinar uma imagem</target>
+</phrase>
+<phrase>
+    <source>La limite fixée pour cet élément maître est atteinte (Limite: %1).
+
+Voulez-vous tout de même lier ce contact esclave ?</source>
+    <target>O limite definido para este elemento mestre foi atingido (Limite: %1).
+
+Deseja vincular este contato escravo mesmo assim?</target>
+</phrase>
+<phrase>
+    <source>Largeur</source>
+    <target>Largura</target>
+</phrase>
+<phrase>
+    <source>Le format DXF utilisé ici (AC1006) ne permet pas d&apos;inclure d&apos;image. Les images seront représentées uniquement par un rectangle de contour (position, taille, rotation et inclinaison conservées), sans le contenu de l&apos;image.</source>
+    <target>O formato DXF usado aqui (AC1006) não permite incluir imagens. As imagens serão representadas apenas por um retângulo de contorno (posição, tamanho, rotação e inclinação preservados), sem o conteúdo da imagem.</target>
+    <definition>message box content</definition>
+</phrase>
+<phrase>
+    <source>Liste de câblage</source>
+    <target>Lista de cabeamento</target>
+    <definition>window title</definition>
+</phrase>
+<phrase>
+    <source>Liste de câblage (base de données)</source>
+    <target>Lista de cabeamento (banco de dados)</target>
+</phrase>
+<phrase>
+    <source>margin: 5px; font-weight: bold;</source>
+    <target>margin: 5px; font-weight: bold;</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;un arc</source>
+    <target>Modificar o ângulo de um arco</target>
+</phrase>
+<phrase>
+    <source>Modifier la courbure d&apos;%1</source>
+    <target>Modificar a curvatura de %1</target>
+</phrase>
+<phrase>
+    <source>Modifier la forme d&apos;%1</source>
+    <target>Modificar a forma de %1</target>
+</phrase>
+<phrase>
+    <source>Modèle</source>
+    <target>Modelo</target>
+</phrase>
+<phrase>
+    <source>Nombre maximum de contacts esclaves définis : non défini
+</source>
+    <target>Número máximo de contatos escravos definidos: não definido
+</target>
+</phrase>
+<phrase>
+    <source>Notes</source>
+    <target>Observações</target>
+</phrase>
+<phrase>
+    <source>Redimensionner %1</source>
+    <target>Redimensionar %1</target>
+</phrase>
+<phrase>
+    <source>Redimensionner une image</source>
+    <target>Redimensionar uma imagem</target>
+</phrase>
+<phrase>
+    <source>Réinitialiser</source>
+    <target>Redefinir</target>
+</phrase>
+<phrase>
+    <source>Selectionner une image...</source>
+    <target>Selecionar uma imagem...</target>
+</phrase>
+<phrase>
+    <source>Séparation de potentiel</source>
+    <target>Separação de potencial</target>
+</phrase>
+<phrase>
+    <source>Taille</source>
+    <target>Tamanho</target>
+</phrase>
+<phrase>
+    <source>Tension nominale</source>
+    <target>Tensão nominal</target>
+</phrase>
+<phrase>
+    <source>Tous les fichiers (*)</source>
+    <target>Todos os arquivos (*)</target>
+</phrase>
+<phrase>
+    <source>Transparence non conservée</source>
+    <target>Transparência não preservada</target>
+</phrase>
+<phrase>
+    <source>une image</source>
+    <target>uma imagem</target>
+    <definition>part of a sentence listing the content of a diagram</definition>
+</phrase>
+<phrase>
+    <source>Verrouiller la numérotation automatique</source>
+    <target>Bloquear a numeração automática</target>
+</phrase>
+<phrase>
+    <source>Verrouiller la position</source>
+    <target>Bloquear a posição</target>
+</phrase>
+<phrase>
+    <source>Échec de l&apos;enregistrement</source>
+    <target>Falha ao salvar</target>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>armário</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>bobina</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>borne</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>borneira</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>cabo</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>calibre</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>bloco de título</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>coleção</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>condutor</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>contato</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>contator</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>corrente</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>disjuntor</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>pasta</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>elemento</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>escravo</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>fusível</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>grade</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>interruptor</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>mestre</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>modelo</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>motor</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>neutro</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>lista de materiais</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>numeração</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>fase</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>potencial</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>projeto</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>potência</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>relé</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>referência de folha</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>designação</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>remissão de folha</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>diagrama</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>seção</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>sumário</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>tensão</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>terra</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>texto</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>transformador</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

lang/phrase/qet_fr_zh.qph

@@ -0,0 +1,917 @@
+<!DOCTYPE QPH>
+<QPH sourcelanguage="fr_FR" language="zh">
+<phrase>
+    <source>    Contacts : NO : %1, NC : %2, inverseurs : %3, autres : %4
+</source>
+    <target>触点：常开：%1，常闭：%2，转换：%3，其他：%4
+</target>
+</phrase>
+<phrase>
+    <source>    Contacts : NO : %1/%2, NC : %3/%4, inverseurs : %5/%6, autres : %7/%8
+</source>
+    <target>触点：常开：%1/%2，常闭：%3/%4，转换：%5/%6，其他：%7/%8
+</target>
+</phrase>
+<phrase>
+    <source> %</source>
+    <target>%</target>
+</phrase>
+<phrase>
+    <source> (Ctrl pendant le glissement = position libre, sans accrochage à la grille)</source>
+    <target>（拖动时按 Ctrl = 自由位置，不吸附到网格）</target>
+</phrase>
+<phrase>
+    <source> -- %1 : mode %2</source>
+    <target>-- %1：%2 模式</target>
+</phrase>
+<phrase>
+    <source> ; point rouge : glisser pour repositionner le centre de rotation</source>
+    <target>；红点：拖动以重新定位旋转中心</target>
+</phrase>
+<phrase>
+    <source> ; point turquoise : arc</source>
+    <target>；青色点：圆弧</target>
+</phrase>
+<phrase>
+    <source> ; un bord : inclinaison</source>
+    <target>；边：倾斜</target>
+</phrase>
+<phrase>
+    <source> °</source>
+    <target>°</target>
+</phrase>
+<phrase>
+    <source> — Cliquer : mode %1</source>
+    <target>— 单击：%1 模式</target>
+</phrase>
+<phrase>
+    <source>, Alt = créer des poignées</source>
+    <target>，Alt = 创建控制柄</target>
+</phrase>
+<phrase>
+    <source>, Alt = détacher en polyligne</source>
+    <target>，Alt = 分离为多段线</target>
+</phrase>
+<phrase>
+    <source>Ajoute une courbe de Bézier sur le folio actuel</source>
+    <target>在当前图纸上添加贝塞尔曲线</target>
+</phrase>
+<phrase>
+    <source>Ajouter un point à une courbe</source>
+    <target>向曲线添加点</target>
+</phrase>
+<phrase>
+    <source>Ajouter une courbe</source>
+    <target>添加曲线</target>
+</phrase>
+<phrase>
+    <source>Angle</source>
+    <target>角度</target>
+</phrase>
+<phrase>
+    <source>Anguleux</source>
+    <target>角点</target>
+</phrase>
+<phrase>
+    <source>Aperçu</source>
+    <target>预览</target>
+</phrase>
+<phrase>
+    <source>Arrondir les coins d&apos;%1</source>
+    <target>将%1的角变圆</target>
+</phrase>
+<phrase>
+    <source>Borne 1</source>
+    <target>端子1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Borne 2</source>
+    <target>端子2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Catégorie</source>
+    <target>类别</target>
+</phrase>
+<phrase>
+    <source>Ce format ne prend pas en charge la transparence : l&apos;image sera enregistrée telle qu&apos;elle était avant l&apos;application de la couleur transparente. Continuer ?</source>
+    <target>此格式不支持透明度：图像将按应用透明色之前的状态保存。是否继续？</target>
+</phrase>
+<phrase>
+    <source>Champ de texte</source>
+    <target>文本字段</target>
+</phrase>
+<phrase>
+    <source>Clic : positionner à la taille d&apos;origine. Cliquer-glisser : positionner et redimensionner. Clic droit : pivoter de 90°. Ctrl+molette : ajuster la taille.</source>
+    <target>单击：按原始尺寸放置。单击拖动：放置并调整大小。右键：旋转 90°。Ctrl+滚轮：调整大小。</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : point suivant ; double-clic ou Entrée : terminer ; clic droit : annuler le dernier point</source>
+    <target>左键单击：下一个点；双击或 Enter：结束；右键单击：撤销上一个点</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le coin opposé (Maj = carré, Ctrl = depuis le centre + position libre, Ctrl+Maj = carré centré) ; clic droit : annuler</source>
+    <target>左键单击：放置对角（Shift = 正方形，Ctrl = 从中心 + 自由位置，Ctrl+Shift = 居中正方形）；右键单击：取消</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le coin opposé (Maj = cercle, Ctrl = depuis le centre + position libre, Ctrl+Maj = cercle centré) ; clic droit : annuler</source>
+    <target>左键单击：放置对角（Shift = 圆形，Ctrl = 从中心 + 自由位置，Ctrl+Shift = 居中圆形）；右键单击：取消</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le point de départ (Ctrl = position libre)</source>
+    <target>左键单击：放置起点（Ctrl = 自由位置）</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le point final (Ctrl = position libre) ; clic droit : annuler</source>
+    <target>左键单击：放置终点（Ctrl = 自由位置）；右键单击：取消</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le premier coin (Ctrl = point central, position libre)</source>
+    <target>左键单击：放置第一个角（Ctrl = 中心点，自由位置）</target>
+</phrase>
+<phrase>
+    <source>Clic gauche : positionner le premier point (Ctrl = position libre)</source>
+    <target>左键单击：放置第一个点（Ctrl = 自由位置）</target>
+</phrase>
+<phrase>
+    <source>Clic: point anguleux. Cliquer-glisser: point courbe. Clic sur le premier point: fermer. Échap/Entrée: terminer. Clic droit: annuler le dernier point.</source>
+    <target>单击：角点。单击拖动：曲线点。单击第一个点：闭合。Esc/Enter：结束。右键：撤销上一个点。</target>
+</phrase>
+<phrase>
+    <source>Cliquer</source>
+    <target>单击</target>
+</phrase>
+<phrase>
+    <source>Cliquer : mode %1</source>
+    <target>单击：%1 模式</target>
+</phrase>
+<phrase>
+    <source>Cliquez pour choisir une couleur</source>
+    <target>点击选择颜色</target>
+</phrase>
+<phrase>
+    <source>Cliquez sur l&apos;image pour ajouter une couleur. Ajustez la tolérance de chaque couleur avec son curseur, ou cliquez sur × pour la retirer.</source>
+    <target>单击图像以添加颜色。使用滑块调整每种颜色的容差，或单击 × 将其移除。</target>
+</phrase>
+<phrase>
+    <source>Cliquez sur l&apos;image pour choisir une couleur</source>
+    <target>单击图像选择颜色</target>
+</phrase>
+<phrase>
+    <source>Coins arrondis</source>
+    <target>圆角</target>
+</phrase>
+<phrase>
+    <source>Composant 1</source>
+    <target>元件1</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Composant 2</source>
+    <target>元件2</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Convertir %1 en courbe de Bézier</source>
+    <target>将 %1 转换为贝塞尔曲线</target>
+</phrase>
+<phrase>
+    <source>Convertir %1 en polyligne</source>
+    <target>将 %1 转换为多段线</target>
+</phrase>
+<phrase>
+    <source>Convertir en courbe de Bézier</source>
+    <target>转换为贝塞尔曲线</target>
+</phrase>
+<phrase>
+    <source>Convertir en polyligne</source>
+    <target>转换为多段线</target>
+</phrase>
+<phrase>
+    <source>Couleur transparente</source>
+    <target>透明色</target>
+</phrase>
+<phrase>
+    <source>Couleur transparente...</source>
+    <target>透明色...</target>
+</phrase>
+<phrase>
+    <source>Courant nominal</source>
+    <target>额定电流</target>
+</phrase>
+<phrase>
+    <source>Deplacer le centre de rotation</source>
+    <target>移动旋转中心</target>
+</phrase>
+<phrase>
+    <source>Distance in pixels between the label and the slave cross reference</source>
+    <target>标签与从站交叉引用之间的像素距离</target>
+</phrase>
+<phrase>
+    <source>Distance label - slave :</source>
+    <target>标签距离 - 从站：</target>
+</phrase>
+<phrase>
+    <source>Définir une couleur transparente</source>
+    <target>设置透明色</target>
+</phrase>
+<phrase>
+    <source>Déformer une courbe</source>
+    <target>变形曲线</target>
+</phrase>
+<phrase>
+    <source>Déplacer le centre de rotation d&apos;une image</source>
+    <target>移动图像的旋转中心</target>
+</phrase>
+<phrase>
+    <source>Déverrouillé : largeur et hauteur peuvent être modifiées indépendamment. Cliquer pour verrouiller.</source>
+    <target>已解锁：宽度和高度可独立修改。单击锁定。</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image d&apos;origine sous...</source>
+    <target>原始图像另存为...</target>
+</phrase>
+<phrase>
+    <source>Enregistrer l&apos;image sous...</source>
+    <target>图像另存为...</target>
+</phrase>
+<phrase>
+    <source>Erreur</source>
+    <target>错误</target>
+</phrase>
+<phrase>
+    <source>Exclure de la nomenclature</source>
+    <target>从物料清单中排除</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter %1</source>
+    <target>旋转 %1</target>
+</phrase>
+<phrase>
+    <source>Faire pivoter une image</source>
+    <target>旋转图像</target>
+</phrase>
+<phrase>
+    <source>Faites glisser les poignées, ou l&apos;intérieur du cadre, pour ajuster la zone à conserver.</source>
+    <target>拖动控制柄或框内区域，调整要保留的区域。</target>
+</phrase>
+<phrase>
+    <source>Fil</source>
+    <target>导线</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Folio</source>
+    <target>图页</target>
+    <definition>column title</definition>
+</phrase>
+<phrase>
+    <source>Forme fermée</source>
+    <target>闭合形状</target>
+</phrase>
+<phrase>
+    <source>Glisser %1 : rotation (Maj = 15°)</source>
+    <target>拖动 %1：旋转（Shift = 15°）</target>
+</phrase>
+<phrase>
+    <source>Glisser : ajuster l&apos;arc (Ctrl = position libre, Maj = 15°)</source>
+    <target>拖动：调整圆弧（Ctrl = 自由位置，Shift = 15°）</target>
+</phrase>
+<phrase>
+    <source>Glisser : arrondir les coins (Ctrl = position libre)</source>
+    <target>拖动：圆角（Ctrl = 自由位置）</target>
+</phrase>
+<phrase>
+    <source>Glisser : déformer la courbe (Ctrl = position libre, Alt = briser la tangente)</source>
+    <target>拖动：变形曲线（Ctrl = 自由位置，Alt = 断开切线）</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer ce point</source>
+    <target>拖动：移动此点</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer le centre de rotation</source>
+    <target>拖动：移动旋转中心</target>
+</phrase>
+<phrase>
+    <source>Glisser : déplacer le point (Ctrl = position libre</source>
+    <target>拖动：移动点（Ctrl = 自由位置</target>
+</phrase>
+<phrase>
+    <source>Glisser : inclinaison (Ctrl = position libre, Maj = 15°)</source>
+    <target>拖动：倾斜（Ctrl = 自由位置，Shift = 15°）</target>
+</phrase>
+<phrase>
+    <source>Glisser : incliner (Maj = par pas de 15°)</source>
+    <target>拖动：倾斜（Shift = 以 15° 为步长）</target>
+</phrase>
+<phrase>
+    <source>Glisser : pivoter (Maj = par pas de 15°)</source>
+    <target>拖动：旋转（Shift = 以 15° 为步长）</target>
+</phrase>
+<phrase>
+    <source>Glisser : redimensionner (Ctrl = depuis le centre + position libre, Maj = proportions</source>
+    <target>拖动：调整大小（Ctrl = 从中心 + 自由位置，Shift = 比例</target>
+</phrase>
+<phrase>
+    <source>Glisser : redimensionner (Maj = conserver les proportions, Ctrl = depuis le centre)</source>
+    <target>拖动：调整大小（Shift = 保持比例，Ctrl = 从中心）</target>
+</phrase>
+<phrase>
+    <source>Glisser : repositionner le centre de rotation (Ctrl = position libre)</source>
+    <target>拖动：重新定位旋转中心（Ctrl = 自由位置）</target>
+</phrase>
+<phrase>
+    <source>Glisser : rotation (Ctrl = position libre, Maj = 15°)</source>
+    <target>拖动：旋转（Ctrl = 自由位置，Shift = 15°）</target>
+</phrase>
+<phrase>
+    <source>Glisser le point violet : arrondir les coins</source>
+    <target>拖动紫色点：圆角</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin : pivoter (Maj = par pas de 15°) ; glisser un bord : incliner (Maj = par pas de 15°) ; point rouge : déplacer le centre de rotation</source>
+    <target>拖动角：旋转（Shift = 以 15° 为步长）；拖动边：倾斜（Shift = 以 15° 为步长）；红点：移动旋转中心</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin/bord : redimensionner (Ctrl = depuis le centre, Maj = conserver les proportions)</source>
+    <target>拖动角/边：调整大小（Ctrl = 从中心，Shift = 保持比例）</target>
+</phrase>
+<phrase>
+    <source>Glisser un coin/bord : redimensionner (Ctrl = depuis le centre, Maj = proportions, Alt = détacher en polyligne)</source>
+    <target>拖动角/边：调整大小（Ctrl = 从中心，Shift = 比例，Alt = 分离为多段线）</target>
+</phrase>
+<phrase>
+    <source>Glisser un point : le déplacer</source>
+    <target>拖动点：移动它</target>
+</phrase>
+<phrase>
+    <source>Glisser une extrémité : la déplacer</source>
+    <target>拖动端点：移动它</target>
+</phrase>
+<phrase>
+    <source>Glisser une poignée ou la courbe : déformer (Alt = briser la tangente) ; Alt+glisser un point anguleux : créer des poignées ; clic droit : menu du nœud le plus proche</source>
+    <target>拖动控制柄或曲线：变形（Alt = 断开切线）；Alt+拖动角点：创建控制柄；右键单击：最近节点菜单</target>
+</phrase>
+<phrase>
+    <source>Géométrie</source>
+    <target>几何</target>
+</phrase>
+<phrase>
+    <source>Hauteur</source>
+    <target>高度</target>
+</phrase>
+<phrase>
+    <source>Image BMP (*.bmp)</source>
+    <target>BMP 图像 (*.bmp)</target>
+</phrase>
+<phrase>
+    <source>Image Files (*.png *.jpg *.jpeg *.bmp *.svg)</source>
+    <target>图像文件 (*.png *.jpg *.jpeg *.bmp *.svg)</target>
+</phrase>
+<phrase>
+    <source>Image JPEG (*.jpg *.jpeg)</source>
+    <target>JPEG 图像 (*.jpg *.jpeg)</target>
+</phrase>
+<phrase>
+    <source>Image PNG (*.png)</source>
+    <target>PNG 图像 (*.png)</target>
+</phrase>
+<phrase>
+    <source>Image source</source>
+    <target>源图像</target>
+</phrase>
+<phrase>
+    <source>Image SVG (*.svg)</source>
+    <target>SVG 图像 (*.svg)</target>
+</phrase>
+<phrase>
+    <source>Images non incluses dans l&apos;export DXF</source>
+    <target>图像未包含在 DXF 导出中</target>
+    <definition>message box title</definition>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer l&apos;image à cet emplacement.</source>
+    <target>无法将图像保存到该位置。</target>
+</phrase>
+<phrase>
+    <source>Impossible d&apos;enregistrer la nomenclature dans %1.
+%2</source>
+    <target>无法将物料清单保存到 %1。
+%2</target>
+</phrase>
+<phrase>
+    <source>Impossible de charger l&apos;image.</source>
+    <target>无法加载图像。</target>
+</phrase>
+<phrase>
+    <source>Inclinaison X</source>
+    <target>X 倾斜</target>
+</phrase>
+<phrase>
+    <source>Inclinaison Y</source>
+    <target>Y 倾斜</target>
+</phrase>
+<phrase>
+    <source>Incliner %1</source>
+    <target>倾斜 %1</target>
+</phrase>
+<phrase>
+    <source>Incliner une image</source>
+    <target>倾斜图像</target>
+</phrase>
+<phrase>
+    <source>La limite fixée pour cet élément maître est atteinte (Limite: %1).
+
+Voulez-vous tout de même lier ce contact esclave ?</source>
+    <target>已达到此主元件的限制（限制：%1）。
+
+是否仍要链接此从属触点？</target>
+</phrase>
+<phrase>
+    <source>Largeur</source>
+    <target>宽度</target>
+</phrase>
+<phrase>
+    <source>Le format DXF utilisé ici (AC1006) ne permet pas d&apos;inclure d&apos;image. Les images seront représentées uniquement par un rectangle de contour (position, taille, rotation et inclinaison conservées), sans le contenu de l&apos;image.</source>
+    <target>此处使用的 DXF 格式 (AC1006) 无法包含图像。图像将仅以轮廓矩形表示（保留位置、大小、旋转和倾斜），不包含图像内容。</target>
+    <definition>message box content</definition>
+</phrase>
+<phrase>
+    <source>Lisse</source>
+    <target>平滑</target>
+</phrase>
+<phrase>
+    <source>Liste de câblage</source>
+    <target>接线列表</target>
+    <definition>window title</definition>
+</phrase>
+<phrase>
+    <source>Liste de câblage (base de données)</source>
+    <target>接线列表（数据库）</target>
+</phrase>
+<phrase>
+    <source>Longueur</source>
+    <target>长度</target>
+</phrase>
+<phrase>
+    <source>margin: 5px; font-weight: bold;</source>
+    <target>margin: 5px; font-weight: bold;</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal</source>
+    <target>水平镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal d&apos;une image</source>
+    <target>图像水平镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir horizontal de %1</source>
+    <target>%1 的水平镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir impossible : inclinaison trop extrême pour cette forme</source>
+    <target>无法镜像：此形状的倾斜过于极端</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical</source>
+    <target>垂直镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical d&apos;une image</source>
+    <target>图像垂直镜像</target>
+</phrase>
+<phrase>
+    <source>Miroir vertical de %1</source>
+    <target>%1 的垂直镜像</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;un arc</source>
+    <target>修改弧的角度</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;une forme</source>
+    <target>修改形状角度</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;angle d&apos;une image</source>
+    <target>修改图像角度</target>
+</phrase>
+<phrase>
+    <source>Modifier l&apos;inclinaison d&apos;une image</source>
+    <target>修改图像倾斜</target>
+</phrase>
+<phrase>
+    <source>Modifier la courbure d&apos;%1</source>
+    <target>修改%1的曲率</target>
+</phrase>
+<phrase>
+    <source>Modifier la forme d&apos;%1</source>
+    <target>修改%1的形状</target>
+</phrase>
+<phrase>
+    <source>Modifier la hauteur d&apos;une image</source>
+    <target>修改图像高度</target>
+</phrase>
+<phrase>
+    <source>Modifier la largeur d&apos;une image</source>
+    <target>修改图像宽度</target>
+</phrase>
+<phrase>
+    <source>Modifier la longueur d&apos;une ligne</source>
+    <target>修改线条长度</target>
+</phrase>
+<phrase>
+    <source>Modifier la taille d&apos;une forme</source>
+    <target>修改形状大小</target>
+</phrase>
+<phrase>
+    <source>Modifier le type d&apos;un nœud</source>
+    <target>修改节点类型</target>
+</phrase>
+<phrase>
+    <source>Modifier une image</source>
+    <target>修改图像</target>
+</phrase>
+<phrase>
+    <source>Modèle</source>
+    <target>型号</target>
+</phrase>
+<phrase>
+    <source>Nombre maximum de contacts esclaves définis : non défini
+</source>
+    <target>已定义的从属触点最大数量：未定义
+</target>
+</phrase>
+<phrase>
+    <source>Notes</source>
+    <target>备注</target>
+</phrase>
+<phrase>
+    <source>Nœud le plus proche</source>
+    <target>最近节点</target>
+</phrase>
+<phrase>
+    <source>pivoter/incliner</source>
+    <target>旋转/倾斜</target>
+</phrase>
+<phrase>
+    <source>Rayon X</source>
+    <target>X半径</target>
+</phrase>
+<phrase>
+    <source>Rayon Y</source>
+    <target>Y半径</target>
+</phrase>
+<phrase>
+    <source>redimensionner</source>
+    <target>调整大小</target>
+</phrase>
+<phrase>
+    <source>Redimensionner %1</source>
+    <target>调整 %1 大小</target>
+</phrase>
+<phrase>
+    <source>Redimensionner une image</source>
+    <target>调整图像大小</target>
+</phrase>
+<phrase>
+    <source>Remplacer l&apos;image...</source>
+    <target>替换图像...</target>
+</phrase>
+<phrase>
+    <source>Remplacer une image</source>
+    <target>替换图像</target>
+</phrase>
+<phrase>
+    <source>Restaurer les proportions</source>
+    <target>恢复比例</target>
+</phrase>
+<phrase>
+    <source>Restaurer les proportions d&apos;une image</source>
+    <target>恢复图像比例</target>
+</phrase>
+<phrase>
+    <source>Retirer cette couleur</source>
+    <target>移除此颜色</target>
+</phrase>
+<phrase>
+    <source>Revenir à l&apos;image complète, sans rognage</source>
+    <target>恢复为完整图像，不裁剪</target>
+</phrase>
+<phrase>
+    <source>rgb(%1, %2, %3)</source>
+    <target>rgb(%1, %2, %3)</target>
+</phrase>
+<phrase>
+    <source>Rogner l&apos;image</source>
+    <target>裁剪图像</target>
+</phrase>
+<phrase>
+    <source>Rogner une image</source>
+    <target>裁剪图像</target>
+</phrase>
+<phrase>
+    <source>Rogner...</source>
+    <target>裁剪...</target>
+</phrase>
+<phrase>
+    <source>Rotation/Inclinaison</source>
+    <target>旋转/倾斜</target>
+</phrase>
+<phrase>
+    <source>Réinitialiser</source>
+    <target>重置</target>
+</phrase>
+<phrase>
+    <source>Selectionner une image...</source>
+    <target>选择图像...</target>
+</phrase>
+<phrase>
+    <source>Supprimer le nœud le plus proche</source>
+    <target>删除最近节点</target>
+</phrase>
+<phrase>
+    <source>Supprimer un point d&apos;une courbe</source>
+    <target>从曲线删除点</target>
+</phrase>
+<phrase>
+    <source>Symétrique</source>
+    <target>对称</target>
+</phrase>
+<phrase>
+    <source>Séparation de potentiel</source>
+    <target>电位分隔</target>
+</phrase>
+<phrase>
+    <source>Taille</source>
+    <target>大小</target>
+</phrase>
+<phrase>
+    <source>Tension nominale</source>
+    <target>额定电压</target>
+</phrase>
+<phrase>
+    <source>Tolérance pour cette couleur</source>
+    <target>此颜色的容差</target>
+</phrase>
+<phrase>
+    <source>Tous les fichiers (*)</source>
+    <target>所有文件 (*)</target>
+</phrase>
+<phrase>
+    <source>Transformer %1</source>
+    <target>变换 %1</target>
+</phrase>
+<phrase>
+    <source>Transparence non conservée</source>
+    <target>不保留透明度</target>
+</phrase>
+<phrase>
+    <source>un arc</source>
+    <target>一段弧</target>
+</phrase>
+<phrase>
+    <source>un coin</source>
+    <target>一个角</target>
+</phrase>
+<phrase>
+    <source>un point</source>
+    <target>一个点</target>
+</phrase>
+<phrase>
+    <source>une courbe</source>
+    <target>一条曲线</target>
+</phrase>
+<phrase>
+    <source>une extrémité</source>
+    <target>一个端点</target>
+</phrase>
+<phrase>
+    <source>une image</source>
+    <target>一张图像</target>
+    <definition>part of a sentence listing the content of a diagram</definition>
+</phrase>
+<phrase>
+    <source>Verrouiller la numérotation automatique</source>
+    <target>锁定自动编号</target>
+</phrase>
+<phrase>
+    <source>Verrouiller la position</source>
+    <target>锁定位置</target>
+</phrase>
+<phrase>
+    <source>Verrouillé : modifier la largeur ou la hauteur ajuste l&apos;autre pour conserver les proportions. Cliquer pour déverrouiller.</source>
+    <target>已锁定：修改宽度或高度会调整另一个以保持比例。单击解锁。</target>
+</phrase>
+<phrase>
+    <source>Échec de l&apos;enregistrement</source>
+    <target>保存失败</target>
+</phrase>
+<phrase>
+    <source>Édition des nœuds</source>
+    <target>节点编辑</target>
+</phrase>
+<phrase>
+    <source>armoire</source>
+    <target>机柜</target>
+    <definition>cabinet / enclosure</definition>
+</phrase>
+<phrase>
+    <source>bobine</source>
+    <target>线圈</target>
+    <definition>coil</definition>
+</phrase>
+<phrase>
+    <source>borne</source>
+    <target>端子</target>
+    <definition>terminal - a connection point on a symbol</definition>
+</phrase>
+<phrase>
+    <source>bornier</source>
+    <target>端子排</target>
+    <definition>terminal strip</definition>
+</phrase>
+<phrase>
+    <source>cable</source>
+    <target>电缆</target>
+    <definition>cable</definition>
+</phrase>
+<phrase>
+    <source>calibre</source>
+    <target>额定值</target>
+    <definition>rating - the current rating of a device</definition>
+</phrase>
+<phrase>
+    <source>cartouche</source>
+    <target>标题栏</target>
+    <definition>title block - the framed information panel</definition>
+</phrase>
+<phrase>
+    <source>collection</source>
+    <target>符号库</target>
+    <definition>collection - the symbol library</definition>
+</phrase>
+<phrase>
+    <source>conducteur</source>
+    <target>导线</target>
+    <definition>conductor - the drawn wire between terminals</definition>
+</phrase>
+<phrase>
+    <source>contact</source>
+    <target>触点</target>
+    <definition>contact</definition>
+</phrase>
+<phrase>
+    <source>contacteur</source>
+    <target>接触器</target>
+    <definition>contactor</definition>
+</phrase>
+<phrase>
+    <source>courant</source>
+    <target>电流</target>
+    <definition>current</definition>
+</phrase>
+<phrase>
+    <source>disjoncteur</source>
+    <target>断路器</target>
+    <definition>circuit breaker</definition>
+</phrase>
+<phrase>
+    <source>dossier</source>
+    <target>文件夹</target>
+    <definition>folder</definition>
+</phrase>
+<phrase>
+    <source>element</source>
+    <target>元件</target>
+    <definition>element - a symbol placed on a sheet</definition>
+</phrase>
+<phrase>
+    <source>esclave</source>
+    <target>从</target>
+    <definition>slave - the contact block belonging to a master</definition>
+</phrase>
+<phrase>
+    <source>fusible</source>
+    <target>熔断器</target>
+    <definition>fuse</definition>
+</phrase>
+<phrase>
+    <source>grille</source>
+    <target>网格</target>
+    <definition>grid</definition>
+</phrase>
+<phrase>
+    <source>interrupteur</source>
+    <target>开关</target>
+    <definition>switch</definition>
+</phrase>
+<phrase>
+    <source>maitre</source>
+    <target>主</target>
+    <definition>master - the element a cross-reference points from</definition>
+</phrase>
+<phrase>
+    <source>modele</source>
+    <target>模板</target>
+    <definition>template</definition>
+</phrase>
+<phrase>
+    <source>moteur</source>
+    <target>电动机</target>
+    <definition>motor</definition>
+</phrase>
+<phrase>
+    <source>neutre</source>
+    <target>中性线</target>
+    <definition>neutral</definition>
+</phrase>
+<phrase>
+    <source>nomenclature</source>
+    <target>物料清单</target>
+    <definition>parts list / bill of materials</definition>
+</phrase>
+<phrase>
+    <source>numerotation</source>
+    <target>编号</target>
+    <definition>numbering - automatic wire and part numbering</definition>
+</phrase>
+<phrase>
+    <source>phase</source>
+    <target>相</target>
+    <definition>phase</definition>
+</phrase>
+<phrase>
+    <source>potentiel</source>
+    <target>电位</target>
+    <definition>potential - conductors electrically joined as one node</definition>
+</phrase>
+<phrase>
+    <source>projet</source>
+    <target>项目</target>
+    <definition>project - the .qet file holding the sheets</definition>
+</phrase>
+<phrase>
+    <source>puissance</source>
+    <target>功率</target>
+    <definition>power</definition>
+</phrase>
+<phrase>
+    <source>relais</source>
+    <target>继电器</target>
+    <definition>relay</definition>
+</phrase>
+<phrase>
+    <source>renvoi de folio</source>
+    <target>图纸交叉引用</target>
+    <definition>sheet cross-reference</definition>
+</phrase>
+<phrase>
+    <source>repere</source>
+    <target>标识</target>
+    <definition>designation - the identifying mark on a part</definition>
+</phrase>
+<phrase>
+    <source>report de folio</source>
+    <target>图纸交叉引用</target>
+    <definition>sheet cross-reference (the arrow symbol)</definition>
+</phrase>
+<phrase>
+    <source>schema</source>
+    <target>原理图</target>
+    <definition>diagram</definition>
+</phrase>
+<phrase>
+    <source>section</source>
+    <target>截面积</target>
+    <definition>cross-section - conductor size in mm2</definition>
+</phrase>
+<phrase>
+    <source>sommaire</source>
+    <target>目录</target>
+    <definition>summary / table of contents</definition>
+</phrase>
+<phrase>
+    <source>tension</source>
+    <target>电压</target>
+    <definition>voltage</definition>
+</phrase>
+<phrase>
+    <source>terre</source>
+    <target>接地</target>
+    <definition>earth / ground</definition>
+</phrase>
+<phrase>
+    <source>texte</source>
+    <target>文本</target>
+    <definition>text</definition>
+</phrase>
+<phrase>
+    <source>transformateur</source>
+    <target>变压器</target>
+    <definition>transformer</definition>
+</phrase>
+</QPH>

misc/MacQetDeploy_arm64_cmake.sh

@@ -103,7 +103,9 @@ cmake -S . -B "$BUILD_DIR" -G Ninja \
     -DBUILD_WITH_KF=$BUILD_WITH_KF \
     -DBUILD_KF=OFF \
     -DQET_EXPORT_PROJECT_DB=ON \
-    -DPACKAGE_TESTS=OFF
+    -DPACKAGE_TESTS=OFF \
+    -DQET_ENABLE_SPACEMOUSE=ON \
+    -DQET_SPACEMOUSE_BACKEND=hid 
 
 if [ $? -ne 0 ]; then
     echo "ERROR: cmake configure failed."

misc/qet-mcp/README.md

@@ -30,14 +30,20 @@ here read the model.
 | `qet_project_info` | title, format version, folios, element and conductor counts |
 | `qet_elements` | placed elements: uuid, type, position, label, information bag |
 | `qet_conductors` | conductors and their documentation fields; filter by attribute |
-| `qet_diff` | **what an edit actually changed** — moves with deltas, adds, removes, relabels, conductor field changes |
+| `qet_diff` | **what an edit actually changed** — element moves, adds, removes, relabels; conductor changes; and folio fields, texts, shapes, images, symbol text fields and terminal strips |
 | `qet_scan` | sweep a directory of projects, counting nodes carrying an attribute |
 | `qet_element_info` | a `.elmt`: translated names, terminals, info fields, part counts |
 | `qet_export` | run a headless export (pdf, png, svg, bom, cables, wires, wiring, nets, links, info) |
+| `qet_edit` | **change a project** — place, move, rotate, label, wire, number, cross-reference, add text, shapes and images, restyle a symbol's text fields, delete; then diff the result |
+| `qet_element_build` | **author a `.elmt`** — draw a new symbol, with terminals to wire it by |
+| `qet_project_new` | **start from nothing** — an empty project with a title and folios |
+| `qet_element_search` | **find a symbol** in a collection by name (any language), type or terminal count |
+| `qet_check` | **design-rule checks** — duplicate labels, unlabelled masters, unnumbered conductors, empty folios |
+| `qet_query` | **ask the project database** — read-only SQL over the views and tables |
 
-Only `qet_export` launches QElectroTech. Everything else parses the file
-directly, which is faster, needs no display, and cannot be confused by a
-dialog.
+`qet_export` and `qet_edit` launch QElectroTech. Everything else parses the
+file directly, which is faster, needs no display, and cannot be confused by
+a dialog.
 
 ## Running it
 
@@ -56,12 +62,80 @@ Register it with an MCP client, for example:
   "mcpServers": {
     "qet": {
       "command": "python3",
-      "args": ["/path/to/qelectrotech/misc/qet-mcp/qet_mcp.py"]
+      "args": ["/path/to/qelectrotech/misc/qet-mcp/qet_mcp.py"],
+      "env": {
+        "QET_MCP_WORKSPACE": "/home/you/drawings",
+        "QET_ENABLE_SCRIPTING": "1"
+      }
     }
   }
 }
 ```
 
+## Five tools need scripting switched on
+
+A QElectroTech with JavaScript scripting switched off refuses `--run`, and
+off is the default from
+[#984](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/984)
+onwards. Five tools here drive it that way and stop working until it is
+turned on:
+
+| | |
+|---|---|
+| need `QET_ENABLE_SCRIPTING=1` | `qet_query`, `qet_continuity`, `qet_check`, `qet_project_new`, `qet_edit` |
+| unaffected | everything else — they read the `.qet` directly, or, in `qet_export`'s case, use a plain CLI flag |
+
+The variable goes in the environment this server is started in, which for an
+MCP client is the `env` block above; the server passes its environment
+straight through to QElectroTech. It does not set the variable itself, on
+purpose — a switch a program turns on for itself is not a switch. Whoever
+configured this server and pointed it at a QElectroTech binary made that
+choice, and their interactive QElectroTech keeps whatever its own setting
+says.
+
+Without it, those five come back `"ok": false` with a `hint` naming the
+variable. Older builds, from before the setting existed, need nothing.
+
+## What the server is allowed to touch
+
+Every path in a tool call is chosen by the model, so without a policy this
+server would be a read/write primitive for anything the operating system
+lets the process reach: read any project on the disk, export one somewhere
+else, overwrite an unrelated file, embed an arbitrary local image or PDF.
+
+So **data paths are confined to a workspace**:
+
+| | |
+|---|---|
+| `QET_MCP_WORKSPACE` | the directories tool calls may read and write, separated by `:` (`;` on Windows) |
+| unset | the directory the server was started in |
+| `QET_MCP_ALLOW_ANY_PATH=1` | turns the check off entirely |
+
+Set the workspace to the folder your drawings live in. A path outside it is
+refused with an error naming what was allowed; symlinks are resolved first,
+so a link planted inside the workspace is judged by where it points.
+
+Two arguments are deliberately **not** confined: `binary` (the
+`qelectrotech` executable) and `elements_dir` (the element collection).
+Those are configuration, chosen once by whoever runs the server, and both
+normally live in `/usr` or a build tree — outside any sensible workspace.
+Confining them would reject the ordinary case while stopping nothing.
+
+`QET_MCP_ALLOW_ANY_PATH=1` is equivalent to granting the client local
+filesystem access with this process's privileges. It exists so that is a
+deliberate choice rather than the default.
+
+**Nothing is overwritten unasked.** `qet_export`, `qet_edit`,
+`qet_project_new` and `qet_element_build` refuse an `output` that already
+exists unless the call passes `"overwrite": true`. Replacing a file is the
+one step this server cannot undo, so it is the one step it will not take on
+its own.
+
+The confinement is applied where tool arguments enter the server, not inside
+each tool. Importing `qet_mcp` and calling `tool_export()` from your own
+Python is not confined and is not meant to be — that is your code calling a
+library, and you already chose the paths.
+
 ## Worked examples
 
 **What did that edit change?**
@@ -79,6 +153,74 @@ Register it with an MCP client, for example:
 Four elements moved by one uniform delta; nothing was relabelled. That is
 the answer a screenshot gave wrongly.
 
+**Draw something, and check it landed**
+
+```json
+{"name": "qet_edit", "arguments": {
+  "binary": "/path/to/qelectrotech",
+  "project": "in.qet", "output": "out.qet",
+  "elements_dir": "/path/to/qelectrotech/elements",
+  "operations": [
+    {"op": "add_folio", "id": "f"},
+    {"op": "set_folio_title", "folio": "$f", "title": "Starter"},
+    {"op": "add_element", "id": "k1", "folio": "$f", "path": "common://.../coil.elmt", "x": 100, "y": 100},
+    {"op": "add_element", "id": "k2", "folio": "$f", "path": "common://.../coil.elmt", "x": 320, "y": 100},
+    {"op": "add_conductor", "folio": "$f", "from": "$k1", "from_terminal": 0, "to": "$k2", "to_terminal": 0},
+    {"op": "set_conductor", "folio": "$f", "element": "$k1", "terminal": 0, "property": "num", "value": "W7"},
+    {"op": "set_label", "folio": "$f", "element": "$k1", "label": "KM1"}
+  ]}}
+```
+
+An op that creates something takes an `"id"`; later ops name it as `"$id"`.
+Terminals are addressed by index — top to bottom, then left to right, **not**
+the order the `.elmt` lists them. `qet_element_info` and `qet_element_search`
+both report that index order. The answer carries a per-operation result
+*and* a `qet_diff`, because "addConductor → true" says the call was
+accepted, not that the file came out right:
+
+```json
+"diff": {"elements":   {"before": 11, "after": 13, "added": ["{0aa3…}", "{6f63…}"]},
+         "conductors": {"before": 47, "after": 48, "added": ["4:{0aa3…}/{2904…}--{6f63…}/{2904…}"],
+                        "removed": []}}
+```
+
+**Draw a symbol that does not exist yet**
+
+```json
+{"name": "qet_element_build", "arguments": {
+  "output": "/path/to/collection/99_custom/my_resistor.elmt",
+  "names": {"en": "Test resistor", "fr": "Résistance de test"},
+  "parts": [
+    {"type": "rect", "x": -10, "y": -20, "width": 20, "height": 40},
+    {"type": "line", "x1": 0, "y1": -30, "x2": 0, "y2": -20},
+    {"type": "line", "x1": 0, "y1": 20,  "x2": 0, "y2": 30},
+    {"type": "text", "x": 14, "y": -4, "text": "R"}
+  ],
+  "terminals": [{"x": 0, "y": -30, "orientation": "n", "name": "1"},
+                {"x": 0, "y": 30,  "orientation": "s", "name": "2"}]}}
+```
+
+Then place it with `qet_edit` like any catalogue element. Unlike a
+project, a `.elmt` is not rewritten by QElectroTech on a round trip, so
+generating one here is safe in a way that generating a `.qet` would not
+be — there is no `toXml()` waiting to drop what this writer did not know
+to emit.
+
+**Ask a question the XML cannot answer**
+
+```json
+{"name": "qet_query", "arguments": {
+  "binary": "/path/to/qelectrotech", "project": "industrial.qet",
+  "sql": "SELECT label, COUNT(*) AS n FROM element_nomenclature_view WHERE label <> '' GROUP BY label HAVING n > 1 ORDER BY n DESC"}}
+```
+
+```json
+"rows": [{"label": "V6", "n": 7}, {"label": "V5", "n": 6}, {"label": "V4", "n": 6}]
+```
+
+Duplicate element labels in a shipped example — a design-rule question,
+answered by the database that already knew it.
+
 **How much of a corpus uses a field?**
 
 ```json
@@ -92,14 +234,43 @@ the answer a screenshot gave wrongly.
 
 Across the shipped examples: 3190 conductors, not one with a cable value.
 
+## Testing
+
+```bash
+python3 test_qet_mcp.py                      # unit + protocol, no QElectroTech needed
+QET_BINARY=/path/to/qelectrotech \
+QET_ELEMENTS=/path/to/qelectrotech/elements \
+QET_EXAMPLES=/path/to/qelectrotech/examples \
+QET_ENABLE_SCRIPTING=1 \
+    python3 test_qet_mcp.py                  # everything
+```
+
+`QET_ENABLE_SCRIPTING=1` matters from #984 onwards: without it the
+integration tests that drive QElectroTech through a script all fail, and
+they fail as "the edit did nothing" rather than as "scripting is off", which
+reads like a regression in the thing under test.
+
+176 tests in three layers: unit (validation, script generation, the terminal
+order rule, the diff, the part schema), the real stdio transport, and
+integration against a built QElectroTech. Several exist because the
+behaviour they pin was once wrong and looked right, and say so in their
+docstrings. To check the suite itself rather than trust it, each of those
+bugs was reintroduced in turn and the suite confirmed to fail: ten in the
+Python, plus the hang guard on `addConductor` and the database refresh in
+`ConductorCreator` in the C++.
+
 ## Notes and limits
 
-- **The project database is not reachable from outside the application.**
-  `projectDataBase::newQuery()` and `isReadOnlySelect()` are C++-internal
-  and the JavaScript scripting API exposes no SQL binding, so structural
-  queries here are done over the XML. A `--query` CLI verb, or a scripting
-  binding, would let this server expose the guarded read-only SQL surface
-  instead, and would be a better foundation.
+- **The project database is reachable now, through `qet_query`.** It was
+  not when this server was written, which is why every other structural
+  tool here re-derives its answer from the XML. Prefer the views —
+  `element_nomenclature_view`, `project_summary_view`, `wiring_list_view`
+  — which exist to be queried; the underlying tables are how the cache is
+  arranged today and a column may move. Call `qet_query` with no `sql` to
+  list both. Only `SELECT` and `WITH` are accepted, which is the rule
+  QElectroTech applies to its own custom-query box, not one invented here.
+  An empty result and a failed query are told apart: `row_count` 0 with no
+  `error` means nothing matched, and a typo'd column name says so.
 - **`qet_export` isolates its launch.** SingleApplication keys its socket
   on `applicationFilePath()`, so a second launch of the same binary path
   forwards its request to an already-running instance and returns *that*
@@ -115,16 +286,64 @@ Across the shipped examples: 3190 conductors, not one with a cable value.
   its ends with `terminal1`/`terminal2`, and the project format has two
   schemes: folio-scoped integer ids in older files, terminal-definition
   uuids plus `element1`/`element2` in newer ones. The integer ids are
-  **renumbered on every save**, so keying on them made all 47 conductors of
-  an untouched `ArduinoLCD.qet` read as 29 removed and 29 re-added the
-  moment the other side had been through QElectroTech. Ends are now keyed
-  by owning element uuid plus terminal, which is stable across a save:
-  measured at 0 colliding keys over 3190 conductors in the 24 shipped
-  examples, and 0 churn on a re-saved but otherwise untouched project.
-  Where an element predates persisted uuids the end cannot be resolved and
-  keeps a `#`-marked unstable key; the diff then reports `unstable_keys`
-  and says so rather than pretending to be comparable.
+  **renumbered on every save**, so keying on them — which this tool did at
+  first — made all 47 conductors of an untouched folio read as removed and
+  re-added the moment the other side had been through QElectroTech, which
+  is exactly what `qet_edit` produces. They are now keyed by owning element
+  uuid plus terminal, which is stable across a save: measured at 0 colliding
+  keys over 3190 conductors in the 24 shipped examples, and 0 churn on a
+  no-op edit. Where an element predates persisted uuids the end cannot be
+  resolved and keeps a `#`-marked unstable key; the diff then reports
+  `unstable_keys` and says so rather than pretending to be comparable.
+- **Texts, shapes and images have no uuid**, so `qet_diff` cannot say "the same
+  text, edited": an edited text reads as the old one removed and a new one
+  added, both shown. Shapes and images are keyed by position, so a restyle
+  or rescale *is* reported as a change to that item, but a move reads as a
+  removal plus an addition. The folio `version` attribute is left out of the
+  comparison on purpose: QElectroTech rewrites it on every save, and
+  including it made every folio of any re-saved project look edited.
 - **Elements** written before persisted uuids fall back to a positional key,
-  which makes a move in such a file read as a remove plus an add rather
-  than as a move.
-- Read-only by design. Nothing here writes to a project.
+  which makes a move in such a file read as a remove plus an add.
+- **`qet_edit` needs a build whose scripting API carries the drawing verbs.**
+  Against an older one it reports exactly which methods are missing and
+  changes nothing. `addElement` and the move/delete verbs shipped with the
+  scripting API; `addConductor`, `rotateElement`, `setElementLabel`,
+  `setElementInfo` and `setFolioTitle` are newer.
+- **`elements_dir` is not optional for `common://` paths.** The sandboxed
+  run has its own empty HOME, so QElectroTech falls back to the compiled-in
+  collection path, which on a machine that never ran `make install` does not
+  exist. The only symptom is `addElement` reporting that a file plainly
+  present "does not resolve to an element". An absolute `.elmt` path works
+  without it.
+- **`set_conductor` changes the whole potential, not one segment.** That is
+  what the application does — a wire number describes a potential — so name
+  a terminal carrying exactly one conductor and the change reaches every
+  conductor electrically joined to it. A terminal several conductors meet
+  at names none of them and is refused, so address a potential from one of
+  its leaves. Property names are the file's own, so `qet_conductors` reads
+  back exactly what was set.
+- **`link_elements` takes a folio for each end**, because a master and its
+  slave are normally on different folios. Whether a pair may be linked is
+  decided by QElectroTech's own `isLinkable()`, so a script cannot make a
+  link the GUI would refuse.
+- **An element must live inside a collection to be placeable.** This is
+  not about the path syntax: an absolute `.elmt` path works, but only if
+  the file sits under a directory QElectroTech knows as a collection.
+  Write it under the tree you pass as `elements_dir` and `qet_edit` can
+  place it, by absolute path or as `common://…`; write it anywhere else
+  and `add_element` reports only "does not resolve to an element".
+- **`qet_element_build` computes the `.elmt` size header, and checks it.**
+  `width`/`height`/`hotspot_x`/`hotspot_y` relate to the drawing by a
+  containment constraint, not a formula — the declared box runs from
+  `(-hotspot_x, -hotspot_y)` to `(width - hotspot_x, height - hotspot_y)`
+  and the drawing must fit inside it. The shipped collection shows authors
+  picking their own margins (one element pads 2 units left and 3 right,
+  another 8 and 2), so there is no convention to copy, only an invariant
+  to satisfy. A drawing that escaped its box is the classic way a
+  hand-written element renders clipped in the collection panel while
+  looking fine in XML.
+- **QElectroTech interrupts a script at 30 s** of its own accord, separately
+  from this tool's `timeout`. A very long operation list will hit that
+  first.
+- **`qet_edit` never writes the input.** It saves to a separate file and
+  diffs the two, so the original is always the thing the diff is against.

misc/qet-mcp/fixtures/plc_master_test.elmt

@@ -0,0 +1,44 @@
+<definition version="0.100.0" type="element" link_type="master" width="40" height="60" hotspot_x="17" hotspot_y="32">
+    <uuid uuid="{6d3714f6-a0e1-71b3-e4bd-5a35d4cbbec1}"/>
+    <names>
+        <name lang="ar">ملف KA  بمحتفظ مغناطيسي</name>
+        <name lang="ca">Bobina</name>
+        <name lang="cs">Bistabilní remanentní relé</name>
+        <name lang="de">Remanenzrelais</name>
+        <name lang="el">Πηνίο με μανδάλωση</name>
+        <name lang="en">Coil</name>
+        <name lang="es">Bobina KA de remanencia</name>
+        <name lang="fr">Bobine KA à rémanence</name>
+        <name lang="hu">Tekercs</name>
+        <name lang="it">Bobina</name>
+        <name lang="nl">spoel remanent</name>
+        <name lang="nl_BE">Spoel KA remanent</name>
+        <name lang="pl">Cewka przekaźnika remanencyjnego</name>
+        <name lang="pt_BR">Bobina</name>
+        <name lang="ru">Обмотка</name>
+        <name lang="zh">剩磁保持线圈</name>
+    </names>
+    <kindInformations>
+        <kindInformation name="type">plc</kindInformation>
+    </kindInformations>
+    <informations>Author: The QElectroTech team
+License: see http://qelectrotech.org/wiki/doc/elements_license</informations>
+    <description>
+        <rect x="14" y="-8" width="6" height="16" rx="0" ry="0" style="line-style:normal;line-weight:normal;filling:none;color:black" antialias="false"/>
+        <line x1="0" y1="-20" x2="0" y2="-8" end1="none" end2="none" length1="1.5" length2="1.5" style="line-style:normal;line-weight:normal;filling:none;color:black" antialias="false"/>
+        <dynamic_text x="2" y="11.33" z="5" text_width="-1" Halignment="AlignLeft" Valignment="AlignTop" frame="false" rotation="0" keep_visual_rotation="false" text_from="UserText" uuid="{647e33ed-520b-4d80-bbc4-7b31177b8f26}" font="Liberation Sans,4,-1,5,25,0,0,0,0,0,Regular">
+            <text>A2</text>
+        </dynamic_text>
+        <dynamic_text x="2" y="-24.67" z="6" text_width="-1" Halignment="AlignLeft" Valignment="AlignTop" frame="false" rotation="0" keep_visual_rotation="false" text_from="UserText" uuid="{fb1f8de9-70c0-4801-8dc7-12e6bf88d8f5}" font="Liberation Sans,4,-1,5,25,0,0,0,0,0,Regular">
+            <text>A1</text>
+        </dynamic_text>
+        <line x1="0" y1="8" x2="0" y2="20" end1="none" end2="none" length1="1.5" length2="1.5" style="line-style:normal;line-weight:normal;filling:none;color:black" antialias="false"/>
+        <dynamic_text x="30" y="-9.17" z="8" text_width="-1" Halignment="AlignLeft" Valignment="AlignTop" frame="false" rotation="0" keep_visual_rotation="false" text_from="ElementInfo" uuid="{b7fccfc3-05f1-459c-9766-f49a481bd0ff}" font="Liberation Sans,9,-1,5,50,0,0,0,0,0,Regular">
+            <text></text>
+            <info_name>label</info_name>
+        </dynamic_text>
+        <polygon x1="-14" y1="-8" x2="14" y2="-8" x3="20" y3="8" x4="-14" y4="8" antialias="false" style="line-style:normal;line-weight:normal;filling:none;color:black"/>
+        <terminal uuid="{6a87c921-6f5d-4f5c-8673-228a6d13c5c8}" name="A2" x="0" y="20" orientation="s" type="Generic"/>
+        <terminal uuid="{2904e5fa-6bbe-4127-acdd-f92feadd6ece}" name="A1" x="0" y="-20" orientation="n" type="Generic"/>
+    </description>
+</definition>

misc/qet-mcp/fixtures/plc_slave_test.elmt

@@ -0,0 +1,16 @@
+<definition version="0.100.0" type="element" link_type="slave" width="20" height="60" hotspot_x="9" hotspot_y="30">
+    <uuid uuid="{94d56f06-6814-5561-9148-2da3a9c4f900}"/>
+    <names>
+        <name lang="en">PLC Slave Test</name>
+    </names>
+    <kindInformations>
+        <kindInformation name="type">plc</kindInformation>
+        <kindInformation name="state">NO</kindInformation>
+        <kindInformation name="number">1</kindInformation>
+    </kindInformations>
+    <description>
+        <rect x="0" y="-8" width="6" height="16" rx="0" ry="0" style="line-style:normal;line-weight:normal;filling:none;color:black" antialias="false"/>
+        <terminal uuid="{6a87c921-6f5d-4f5c-8673-228a6d13c500}" name="1" x="0" y="20" orientation="s" type="Generic"/>
+        <terminal uuid="{2904e5fa-6bbe-4127-acdd-f92feadd6e00}" name="2" x="0" y="-20" orientation="n" type="Generic"/>
+    </description>
+</definition>

misc/spacemouse-capture.py

@@ -0,0 +1,195 @@
+#!/usr/bin/env python3
+# Copyright 2006-2026 The QElectroTech Team
+# This file is part of QElectroTech.
+#
+# QElectroTech is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# QElectroTech is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+"""Record raw USB reports from a 3Dconnexion 3D mouse, for QElectroTech.
+
+QElectroTech's Windows/macOS 3D mouse support reads the device directly
+over USB, so it has to decode each device model's raw reports itself.
+This records what your device sends while you make a few guided
+movements, and saves it to one file you can attach to the discussion.
+Nothing is sent anywhere.
+
+    sudo python3 spacemouse-capture.py            # finds the device itself
+    sudo python3 spacemouse-capture.py --list     # just show what it finds
+
+sudo is needed because /dev/hidraw* is usually readable by root only.
+spacenavd can keep running. If the recording comes out empty, stop it
+(`sudo systemctl stop spacenavd`) and try again.
+
+Only the standard library is used, so it runs on any Linux with Python 3.
+"""
+import argparse
+import datetime
+import glob
+import json
+import os
+import platform
+import select
+import sys
+import time
+
+VENDORS = {0x046D: 'Logitech (older 3Dconnexion)', 0x256F: '3Dconnexion'}
+
+STEPS = [
+    ('rest', 'Do not touch the device.', 3),
+    ('right', 'Push the cap to the RIGHT and hold it, then let go.', 4),
+    ('left', 'Push the cap to the LEFT and hold it, then let go.', 4),
+    ('away', 'Push the cap AWAY from you and hold it, then let go.', 4),
+    ('toward', 'Pull the cap TOWARDS you and hold it, then let go.', 4),
+    ('down', 'Press the cap DOWN and hold it, then let go.', 4),
+    ('up', 'Lift the cap UP and hold it, then let go.', 4),
+    ('twist_cw', 'TWIST the cap CLOCKWISE (seen from above) and hold, then let go.', 4),
+    ('twist_ccw', 'TWIST the cap ANTICLOCKWISE and hold, then let go.', 4),
+    ('tilt_away', 'TILT the cap AWAY from you and hold, then let go.', 4),
+    ('tilt_right', 'TILT the cap to the RIGHT and hold, then let go.', 4),
+    ('buttons', 'Press each button once, slowly, one at a time, in any order.', 15),
+]
+
+
+def find_devices():
+    """Return [{hidraw, name, vendor, product, sysfs}] for 3Dconnexion devices."""
+    found = []
+    for sysdir in sorted(glob.glob('/sys/class/hidraw/hidraw*')):
+        try:
+            with open(os.path.join(sysdir, 'device', 'uevent')) as f:
+                uevent = dict(line.strip().split('=', 1) for line in f if '=' in line)
+        except OSError:
+            continue
+        # HID_ID=0003:0000256F:0000C635  (bus:vendor:product)
+        try:
+            _bus, vendor, product = (int(x, 16) for x in uevent.get('HID_ID', '').split(':'))
+        except ValueError:
+            continue
+        if vendor not in VENDORS:
+            continue
+        found.append({
+            'hidraw': '/dev/' + os.path.basename(sysdir),
+            'name': uevent.get('HID_NAME', '?'),
+            'vendor': '%04x' % vendor,
+            'product': '%04x' % product,
+            'sysfs': sysdir,
+        })
+    return found
+
+
+def read_descriptor(sysdir):
+    try:
+        with open(os.path.join(sysdir, 'device', 'report_descriptor'), 'rb') as f:
+            return f.read().hex()
+    except OSError as e:
+        return 'unreadable: %s' % e
+
+
+def record(fd, seconds):
+    """Read every report arriving within `seconds`; return [[ms, hex], ...]."""
+    reports = []
+    start = time.monotonic()
+    while True:
+        left = seconds - (time.monotonic() - start)
+        if left <= 0:
+            return reports
+        ready, _, _ = select.select([fd], [], [], left)
+        if not ready:
+            continue
+        try:
+            data = os.read(fd, 64)
+        except BlockingIOError:
+            continue
+        if not data:  # only a test FIFO with no writer does this
+            time.sleep(0.01)
+            continue
+        reports.append([round((time.monotonic() - start) * 1000, 1), data.hex()])
+
+
+def main():
+    ap = argparse.ArgumentParser(description=__doc__.splitlines()[0])
+    ap.add_argument('--list', action='store_true', help='only list matching devices')
+    ap.add_argument('--device', help='hidraw path, if more than one device is found')
+    ap.add_argument('--descriptor', help=argparse.SUPPRESS)  # testing without a device
+    ap.add_argument('--yes', action='store_true', help=argparse.SUPPRESS)  # no Enter prompts
+    ap.add_argument('-o', '--output', help='output file (default: spacemouse-capture-<product>.json)')
+    args = ap.parse_args()
+
+    devices = find_devices()
+    if args.list:
+        for d in devices:
+            print('%(hidraw)s  %(vendor)s:%(product)s  %(name)s' % d)
+        if not devices:
+            print('No 3Dconnexion device found under /sys/class/hidraw.')
+        return 0 if devices else 1
+
+    if args.device:
+        dev = next((d for d in devices if d['hidraw'] == args.device),
+                   {'hidraw': args.device, 'name': '?', 'vendor': '?', 'product': '?', 'sysfs': None})
+    elif len(devices) == 1:
+        dev = devices[0]
+    elif not devices:
+        sys.exit('No 3Dconnexion device found. Is it plugged in? (try --list)')
+    else:
+        sys.exit('Several devices found, pick one with --device:\n' +
+                 '\n'.join('  %(hidraw)s  %(name)s' % d for d in devices))
+
+    if args.descriptor:
+        with open(args.descriptor, 'rb') as f:
+            descriptor = f.read().hex()
+    elif dev['sysfs']:
+        descriptor = read_descriptor(dev['sysfs'])
+    else:
+        descriptor = 'unknown'
+
+    try:
+        fd = os.open(dev['hidraw'], os.O_RDONLY | os.O_NONBLOCK)
+    except PermissionError:
+        sys.exit('Permission denied on %s -- run with sudo.' % dev['hidraw'])
+
+    print('Recording from %s (%s, %s:%s).' % (dev['hidraw'], dev['name'], dev['vendor'], dev['product']))
+    print('For each step, press Enter, do the movement, and wait for the next prompt.\n')
+
+    result = {
+        'tool': 'spacemouse-capture.py 1',
+        'date': datetime.datetime.now(datetime.timezone.utc).isoformat(timespec='seconds'),
+        'system': platform.platform(),
+        'device': {k: dev[k] for k in ('name', 'vendor', 'product')},
+        'report_descriptor': descriptor,
+        'steps': [],
+    }
+    try:
+        for i, (key, text, seconds) in enumerate(STEPS, 1):
+            print('[%d/%d] %s' % (i, len(STEPS), text))
+            if not args.yes:
+                input('      Press Enter to start (%d s)... ' % seconds)
+            reports = record(fd, seconds)
+            print('      %d reports recorded.\n' % len(reports))
+            result['steps'].append({'step': key, 'instruction': text, 'reports': reports})
+    except KeyboardInterrupt:
+        print('\nStopped early -- saving what was recorded so far.')
+    finally:
+        os.close(fd)
+
+    out = args.output or 'spacemouse-capture-%s.json' % dev['product']
+    with open(out, 'w') as f:
+        json.dump(result, f, indent=1)
+    total = sum(len(s['reports']) for s in result['steps'])
+    print('Saved %s (%d reports in total).' % (out, total))
+    if total == 0:
+        print('Nothing was recorded. Try stopping spacenavd first: sudo systemctl stop spacenavd')
+    else:
+        print('Please attach this file to discussion #599. Thank you!')
+    return 0
+
+
+if __name__ == '__main__':
+    sys.exit(main())

sources/ElementsCollection/elementscollectionmodel.cpp

@@ -49,6 +49,14 @@ ElementsCollectionModel::ElementsCollectionModel(QObject *parent) :
 */
 ElementsCollectionModel::~ElementsCollectionModel()
 {
+	// Without cancel(), the wait below runs the whole queued
+	// QtConcurrent::map() to completion, so closing this dialog on a
+	// large collection blocks until every remaining item has been
+	// processed -- a visible hang on the button pressed precisely to
+	// stop the work. cancel() drops the not-yet-started items so the
+	// wait that follows (still needed, so an in-flight item can't
+	// dereference this object after it's gone) is short.
+	m_future.cancel();
 	m_future.waitForFinished();
 }
 
@@ -431,7 +439,7 @@ void ElementsCollectionModel::addLocation(const ElementsLocation& location)
 											   collection_name);
 		}
 	}
-	// ANPASSUNG: Makros und Custom Collection werden hier behandelt!
+	// Macros and Custom Collection are handled here
 	else if (location.isCustomCollection() || location.isMacrosCollection()) {
 		QList <ElementCollectionItem *> child_list;
 
@@ -495,6 +503,10 @@ void ElementsCollectionModel::addProject(QETProject *project, bool set_data)
 	connect(project->embeddedElementCollection(),
 		&XmlElementCollection::directoryRemoved,
 		this, &ElementsCollectionModel::itemRemovedFromCollection);
+	connect(project, &QETProject::projectTitleChanged,
+		this, &ElementsCollectionModel::projectNameChanged);
+	connect(project, &QETProject::projectFilePathChanged,
+		this, &ElementsCollectionModel::projectNameChanged);
 }
 
 /**
@@ -526,6 +538,10 @@ void ElementsCollectionModel::removeProject(QETProject *project)
 			   &XmlElementCollection::directoryRemoved,
 			   this,
 			   &ElementsCollectionModel::itemRemovedFromCollection);
+		disconnect(project, &QETProject::projectTitleChanged,
+			   this, &ElementsCollectionModel::projectNameChanged);
+		disconnect(project, &QETProject::projectFilePathChanged,
+			   this, &ElementsCollectionModel::projectNameChanged);
 	}
 }
 
@@ -647,7 +663,7 @@ QModelIndex ElementsCollectionModel::indexFromLocation(
 		if (eci->type() == FileElementCollectionItem::Type) {
 			if (FileElementCollectionItem *feci = static_cast<FileElementCollectionItem *>(eci)) {
 
-				// ANPASSUNG: Makro-Prüfung hinzugefügt, damit das Modell den Pfad im Baum findet!
+				// Macro check added so the model finds the path in the tree
 				if ( (location.isCommonCollection() && feci->isCommonCollection()) ||
 					(location.isCompanyCollection() && feci->isCompanyCollection()) ||
 					(location.isMacrosCollection() && feci->isMacrosCollection()) ||
@@ -766,3 +782,15 @@ void ElementsCollectionModel::updateItem(const QString& path)
 		eci->setUpData();
 	}
 }
+
+/**
+	@brief ElementsCollectionModel::projectNameChanged
+	Update the displayed name of the collection of project,
+	when its title or its file path changed.
+	@param project
+*/
+void ElementsCollectionModel::projectNameChanged(QETProject *project)
+{
+	if (XmlProjectElementCollectionItem *xpeci = m_project_hash.value(project))
+		xpeci->updateProjectName();
+}

sources/ElementsCollection/elementscollectionmodel.h

@@ -73,6 +73,7 @@ class ElementsCollectionModel : public QStandardItemModel
 		void elementIntegratedToCollection (const QString& path);
 		void itemRemovedFromCollection (const QString& path);
 		void updateItem (const QString& path);
+		void projectNameChanged (QETProject *project);
 
 	private:
 		QList <QETProject *> m_project_list;

sources/ElementsCollection/elementslocation.cpp

@@ -653,9 +653,16 @@ QDomElement ElementsLocation::xml() const
 	if (!m_project)
 	{
 		QFile file (m_file_system_path);
+		if (!file.open(QIODevice::ReadOnly | QIODevice::Text))
+			return QDomElement();
+
 		QDomDocument docu;
 		if (docu.setContent(&file))
+		{
+			file.close();
 			return docu.documentElement();
+		}
+		file.close();
 	}
 	else
 	{

sources/ElementsCollection/elementslocation.h

@@ -20,7 +20,7 @@
 
 #include "../NameList/nameslist.h"
 #include "../diagramcontext.h"
-#include "pugixml/src/pugixml.hpp"
+#include "pugixml.hpp"
 
 #include <QIcon>
 #include <QString>

sources/ElementsCollection/fileelementcollectionitem.cpp

@@ -162,7 +162,7 @@ QString FileElementCollectionItem::localName()
 			else if (m_path == QETApp::customElementsDirN())
 				setText(QObject::tr("Collection utilisateur"));
 			else if (m_path == macrosPath)
-				setText(QObject::tr("Makros"));
+				setText(QObject::tr("Macros"));
 			else
 				setText(QObject::tr("Collection inconnue"));
 		}

sources/ElementsCollection/xmlprojectelementcollectionitem.cpp

@@ -21,6 +21,8 @@
 #include "../qetproject.h"
 #include "xmlelementcollection.h"
 
+#include <QFileInfo>
+
 /**
 	@brief XmlProjectElementCollectionItem::XmlProjectElementCollectionItem
 	Constructor
@@ -58,10 +60,7 @@ QString XmlProjectElementCollectionItem::localName()
 		return text();
 
 	if (isCollectionRoot()) {
-		if (m_project->title().isEmpty())
-			setText(QObject::tr("Projet sans titre"));
-		else
-			setText(m_project->title());
+		updateProjectName();
 	}
 	else {
 		ElementsLocation location (embeddedPath(), m_project);
@@ -71,6 +70,25 @@ QString XmlProjectElementCollectionItem::localName()
 	return text();
 }
 
+/**
+	@brief XmlProjectElementCollectionItem::updateProjectName
+	Set the displayed name of the collection root from the project :
+	its title, or its file name when it has no title, like the project panel.
+	Does nothing if this item is not the root of the collection.
+*/
+void XmlProjectElementCollectionItem::updateProjectName()
+{
+	if (!isCollectionRoot() || !m_project)
+		return;
+
+	if (!m_project->title().isEmpty())
+		setText(m_project->title());
+	else if (!m_project->filePath().isEmpty())
+		setText(QFileInfo(m_project->filePath()).completeBaseName());
+	else
+		setText(QObject::tr("Projet sans titre"));
+}
+
 /**
 	@brief XmlProjectElementCollectionItem::name
 	@return The collection name of this item

sources/ElementsCollection/xmlprojectelementcollectionitem.h

@@ -45,6 +45,7 @@ class XmlProjectElementCollectionItem : public ElementCollectionItem
 		bool isCollectionRoot() const override;
 		void addChildAtPath(const QString &collection_name) override;
 		QETProject * project() const;
+		void updateProjectName();
 
 		void setProject (QETProject *project,
 				 bool set_data = true,

sources/NameList/nameslist.h

@@ -17,7 +17,7 @@
 */
 #ifndef NAMES_LIST_H
 #define NAMES_LIST_H
-#include "pugixml/src/pugixml.hpp"
+#include "pugixml.hpp"
 
 #include <QtXml>
 /**

sources/TerminalStrip/UndoCommand/addterminaltostripcommand.cpp

@@ -171,20 +171,20 @@ MoveTerminalCommand::MoveTerminalCommand(QSharedPointer<PhysicalTerminal> termin
 	QString text;
 	if (t_label.isEmpty()) {
 		if (strip_name.isEmpty() && new_strip_name.isEmpty())
-			text = QObject::tr("Déplacer une borne d'un groupe de bornes vers un groupe de bornes");
+			text = QObject::tr("Déplacer une borne d'un groupe de bornes vers un autre groupe de bornes");
 		else if (strip_name.isEmpty())
 			text = QObject::tr("Déplacer une borne d'un groupe de bornes vers le groupe de bornes %1").arg(new_strip_name);
 		else if (new_strip_name.isEmpty())
-			text = QObject::tr("Déplacer une borne du groupe de bornes %1 vers un groupe de bornes").arg(strip_name);
+			text = QObject::tr("Déplacer une borne du groupe de bornes %1 vers un autre groupe de bornes").arg(strip_name);
 		else
 			text = QObject::tr("Déplacer une borne du groupe de bornes %1 vers le groupe de bornes %2").arg(strip_name, new_strip_name);
 	} else {
 		if (strip_name.isEmpty() && new_strip_name.isEmpty())
-			text = QObject::tr("Déplacer la borne %1 d'un groupe de bornes vers un groupe de bornes").arg(t_label);
+			text = QObject::tr("Déplacer la borne %1 d'un groupe de bornes vers un autre groupe de bornes").arg(t_label);
 		else if (strip_name.isEmpty())
 			text = QObject::tr("Déplacer la borne %1 d'un groupe de bornes vers le groupe de bornes %2").arg(t_label, new_strip_name);
 		else if (new_strip_name.isEmpty())
-			text = QObject::tr("Déplacer la borne %1 du groupe de bornes %2 vers un groupe de bornes").arg(t_label, strip_name);
+			text = QObject::tr("Déplacer la borne %1 du groupe de bornes %2 vers un autre groupe de bornes").arg(t_label, strip_name);
 		else
 			text = QObject::tr("Déplacer la borne %1 du groupe de bornes %2 vers le groupe de bornes %3").arg(t_label, strip_name, new_strip_name);
 	}
@@ -205,11 +205,11 @@ MoveTerminalCommand::MoveTerminalCommand(QVector<QSharedPointer<PhysicalTerminal
 
 	QString text;
 	if (strip_name.isEmpty() && new_strip_name.isEmpty())
-		text = QObject::tr("Déplacer %n borne(s) d'un groupe de bornes vers un groupe de bornes", "", count);
+		text = QObject::tr("Déplacer %n borne(s) d'un groupe de bornes vers un autre groupe de bornes", "", count);
 	else if (strip_name.isEmpty())
 		text = QObject::tr("Déplacer %n borne(s) d'un groupe de bornes vers le groupe de bornes %1", "", count).arg(new_strip_name);
 	else if (new_strip_name.isEmpty())
-		text = QObject::tr("Déplacer %n borne(s) du groupe de bornes %1 vers un groupe de bornes", "", count).arg(strip_name);
+		text = QObject::tr("Déplacer %n borne(s) du groupe de bornes %1 vers un autre groupe de bornes", "", count).arg(strip_name);
 	else
 		text = QObject::tr("Déplacer %n borne(s) du groupe de bornes %1 vers le groupe de bornes %2", "", count).arg(strip_name, new_strip_name);
 	setText(text);

sources/TerminalStrip/ui/freeterminaleditor.cpp

@@ -46,10 +46,11 @@ FreeTerminalEditor::FreeTerminalEditor(QETProject *project, QWidget *parent) :
         connect(m_project, &QObject::destroyed, this, &FreeTerminalEditor::reload);
     }
 
-		//Disabled the move if the table is currently edited (yellow cell)
-	connect(m_model, &FreeTerminalModel::dataChanged, this, [=] {
-		this->setDisabledMove();
-	});
+		//Disable the move button while cells are edited (yellow), re-evaluate on every change
+	connect(m_model, &FreeTerminalModel::dataChanged, this, &FreeTerminalEditor::selectionChanged);
+
+	connect(ui->m_table_view->selectionModel(), &QItemSelectionModel::selectionChanged,
+			this, &FreeTerminalEditor::selectionChanged);
 
 	connect(ui->m_table_view, &QAbstractItemView::doubleClicked, this, [=](const QModelIndex &index)
 	{
@@ -102,7 +103,7 @@ void FreeTerminalEditor::reload()
 			QString str(strip->installation() + " " + strip->location() + " " + strip->name());
 			ui->m_move_in_cb->addItem(str, strip->uuid());
 		}
-		setDisabledMove(false);
+		selectionChanged();
 	}
 }
 
@@ -273,10 +274,19 @@ void FreeTerminalEditor::on_m_move_pb_clicked()
 	reload();
 }
 
+void FreeTerminalEditor::selectionChanged()
+{
+	const bool has_selection = !ui->m_table_view->selectionModel()->selectedIndexes().isEmpty();
+	const bool has_pending   = !m_model->modifiedModelRealTerminalData().isEmpty();
+	setDisabledMove(!has_selection || has_pending);
+}
+
 void FreeTerminalEditor::setDisabledMove(bool b)
 {
 	ui->m_move_label->setDisabled(b);
 	ui->m_move_in_cb->setDisabled(b);
 	ui->m_move_pb->setDisabled(b);
+	ui->m_move_pb->setToolTip(b ? tr("Appliquez ou annulez les modifications en cours avant de déplacer")
+								: tr("Déplacer les bornes sélectionnées vers le bornier choisi"));
 }
 

sources/TerminalStrip/ui/freeterminalmodel.cpp

@@ -182,7 +182,7 @@ bool FreeTerminalModel::setData(const QModelIndex &index, const QVariant &value,
 		modified_ = true;
 		modified_cell = FUNCTION_CELL;
 	}
-	else if (column_ == LED_CELL)
+	else if (column_ == LED_CELL && mrtd.led_ != value.toBool())
 	{
 		mrtd.led_ = value.toBool();
 		modified_ = true;

sources/autoNum/renumberelementscommand.cpp

@@ -0,0 +1,78 @@
+/*
+    Copyright 2006-2026 The QElectroTech Team
+    This file is part of QElectroTech.
+
+    QElectroTech is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 2 of the License, or
+    (at your option) any later version.
+
+    QElectroTech is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "renumberelementscommand.h"
+
+#include "../qetproject.h"
+#include "../qetgraphicsitem/element.h"
+
+RenumberElementsCommand::RenumberElementsCommand(
+        QETProject *project,
+        QVector<ElementChange> changes,
+        QHash<QString, NumerotationContext> old_ctx,
+        QHash<QString, NumerotationContext> new_ctx,
+        const QString &text)
+    : QUndoCommand(text)
+    , project_(project)
+    , changes_(std::move(changes))
+    , old_ctx_(std::move(old_ctx))
+    , new_ctx_(std::move(new_ctx))
+{
+}
+
+void RenumberElementsCommand::undo()
+{
+    apply(false);
+}
+
+void RenumberElementsCommand::redo()
+{
+    // QUndoStack calls redo() once immediately after push(); keep standard behaviour.
+    if (first_redo_) {
+        first_redo_ = false;
+    }
+    apply(true);
+}
+
+void RenumberElementsCommand::apply(bool use_new)
+{
+    if (!project_) return;
+
+    // Restore project contexts
+    const auto &ctx = use_new ? new_ctx_ : old_ctx_;
+    for (auto it = ctx.constBegin(); it != ctx.constEnd(); ++it) {
+        project_->addElementAutoNum(it.key(), it.value());
+    }
+
+    // Apply per-element changes
+    for (const ElementChange &c : changes_) {
+        if (!c.element) continue;
+
+        const bool frozen = use_new ? c.new_frozen : c.old_frozen;
+        const auto &infos = use_new ? c.new_infos : c.old_infos;
+        const auto &seq   = use_new ? c.new_seq   : c.old_seq;
+
+        // Temporarily unfreeze so that label/infos update correctly.
+        const bool was_frozen = c.element->isFreezeLabel();
+        if (was_frozen) c.element->freezeLabel(false);
+
+        c.element->rSequenceStruct() = seq;
+        c.element->setElementInformations(infos);
+        c.element->freezeLabel(frozen);
+    }
+}

sources/autoNum/renumberelementscommand.h

@@ -0,0 +1,70 @@
+/*
+    Copyright 2006-2026 The QElectroTech Team
+    This file is part of QElectroTech.
+
+    QElectroTech is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 2 of the License, or
+    (at your option) any later version.
+
+    QElectroTech is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef RENUMBERELEMENTSCOMMAND_H
+#define RENUMBERELEMENTSCOMMAND_H
+
+#include <QUndoCommand>
+#include <QHash>
+#include <QVector>
+
+#include "../diagramcontext.h"
+#include "assignvariables.h" // defines autonum::sequentialNumbers
+
+class Element;
+class QETProject;
+
+/**
+ * @brief Undoable renumbering of element labels and sequence structs.
+ */
+class RenumberElementsCommand final : public QUndoCommand
+{
+public:
+    struct ElementChange
+    {
+        Element *element = nullptr;
+        DiagramContext old_infos;
+        DiagramContext new_infos;
+        autonum::sequentialNumbers old_seq;
+        autonum::sequentialNumbers new_seq;
+        bool old_frozen = false;
+        bool new_frozen = false;
+    };
+
+    RenumberElementsCommand(
+            QETProject *project,
+            QVector<ElementChange> changes,
+            QHash<QString, NumerotationContext> old_ctx,
+            QHash<QString, NumerotationContext> new_ctx,
+            const QString &text);
+
+    void undo() override;
+    void redo() override;
+
+private:
+    void apply(bool use_new);
+
+private:
+    QETProject *project_ = nullptr;
+    QVector<ElementChange> changes_;
+    QHash<QString, NumerotationContext> old_ctx_;
+    QHash<QString, NumerotationContext> new_ctx_;
+    bool first_redo_ = true;
+};
+
+#endif // RENUMBERELEMENTSCOMMAND_H

sources/autoNum/ui/autonumberingmanagementw.cpp

@@ -23,6 +23,7 @@
 #include "formulaautonumberingw.h"
 #include "numparteditorw.h"
 #include "qdebug.h"
+#include "renumberelementsdialog.h"
 #include "ui_autonumberingmanagementw.h"
 #include "ui_formulaautonumberingw.h"
 
@@ -48,6 +49,8 @@ AutoNumberingManagementW::AutoNumberingManagementW(QETProject *project,
 	ui->m_selected_folios_le->setDisabled(true);
 	ui->m_selected_folios_le->setReadOnly(true);
 	ui->m_apply_project_rb->setChecked(true);
+	// Enabled only when project is in "Under Development" status and not read-only.
+	ui->m_renumber_elements_pb->setEnabled(ui->m_status_cb->currentIndex() == 0 && project_ && !project_->isReadOnly());
 	setProjectContext();
 }
 
@@ -87,6 +90,7 @@ void AutoNumberingManagementW::on_m_status_cb_currentIndexChanged(int index)
 		ui->m_both_conductor_rb->setChecked(true);
 		ui->m_both_element_rb->setChecked(true);
 		ui->m_both_folio_rb->setChecked(true);
+		ui->m_renumber_elements_pb->setEnabled(true);
 	}
 	//Installing
 	else if (index == 1) {
@@ -96,15 +100,31 @@ void AutoNumberingManagementW::on_m_status_cb_currentIndexChanged(int index)
 		ui->m_new_conductor_rb->setChecked(true);
 		ui->m_new_element_rb->setChecked(true);
 		ui->m_new_folio_rb->setChecked(true);
+		ui->m_renumber_elements_pb->setEnabled(true);
 	}
 	//Built
 	else if (index == 2) {
 		ui->m_disable_conductor_rb->setChecked(true);
 		ui->m_disable_element_rb->setChecked(true);
 		ui->m_disable_folio_rb->setChecked(true);
+        	ui->m_renumber_elements_pb->setEnabled(false);
 	}
 }
 
+void AutoNumberingManagementW::on_m_renumber_elements_pb_clicked()
+{
+	if (!project_ || project_->isReadOnly()) return;
+	// Only allowed during "Under Development"
+	// if (ui->m_status_cb->currentIndex() != 1) return;
+
+	QStringList titles = project_->elementAutoNum().keys();
+	titles.sort(Qt::CaseInsensitive);
+	RenumberElementsDialog dlg(titles, this);
+	if (dlg.exec() != QDialog::Accepted) return;
+
+	project_->renumberElementsBySchemeTitle(dlg.selectedSchemeTitle());
+}
+
 /**
 	@brief AutoNumberingManagementW::on_m_apply_folios_rb_clicked
 	Set From Folios Combobox

sources/autoNum/ui/autonumberingmanagementw.h

@@ -50,6 +50,7 @@ class AutoNumberingManagementW : public QWidget
 		void on_m_from_folios_cb_currentIndexChanged(int);
 		void on_m_to_folios_cb_currentIndexChanged(int);
 		void on_m_status_cb_currentIndexChanged(int);
+		void on_m_renumber_elements_pb_clicked();
 		void on_m_apply_folios_rb_clicked();
 		void on_m_apply_project_rb_clicked();
 		void on_buttonBox_clicked(QAbstractButton *);

sources/autoNum/ui/autonumberingmanagementw.ui

@@ -305,6 +305,13 @@
            </property>
           </widget>
          </item>
+        <item>
+         <widget class="QPushButton" name="m_renumber_elements_pb">
+          <property name="text">
+           <string>Renumber element(s)…</string>
+          </property>
+         </widget>
+        </item>
          <item>
           <spacer name="horizontalSpacer_2">
            <property name="orientation">

sources/autoNum/ui/renumberelementsdialog.cpp

@@ -0,0 +1,75 @@
+/*
+    Copyright 2006-2026 The QElectroTech Team
+    This file is part of QElectroTech.
+
+    QElectroTech is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 2 of the License, or
+    (at your option) any later version.
+
+    QElectroTech is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "renumberelementsdialog.h"
+
+#include <QComboBox>
+#include <QDialogButtonBox>
+#include <QFormLayout>
+#include <QGroupBox>
+#include <QHBoxLayout>
+#include <QLabel>
+#include <QRadioButton>
+#include <QVBoxLayout>
+
+RenumberElementsDialog::RenumberElementsDialog(const QStringList &scheme_titles, QWidget *parent)
+    : QDialog(parent)
+    , m_scheme_titles(scheme_titles)
+{
+    setWindowTitle(tr("Renumber element(s)"));
+    setModal(true);
+
+    auto *vl = new QVBoxLayout(this);
+
+    auto *scope = new QGroupBox(tr("Scope"), this);
+    auto *scope_l = new QVBoxLayout(scope);
+    m_all_rb = new QRadioButton(tr("All schemes"), scope);
+    m_one_rb = new QRadioButton(tr("One scheme"), scope);
+    scope_l->addWidget(m_all_rb);
+    scope_l->addWidget(m_one_rb);
+    vl->addWidget(scope);
+
+    auto *form = new QFormLayout();
+    m_combo = new QComboBox(this);
+    m_combo->addItems(m_scheme_titles);
+    form->addRow(new QLabel(tr("Scheme:"), this), m_combo);
+    vl->addLayout(form);
+
+    m_buttons = new QDialogButtonBox(QDialogButtonBox::Ok | QDialogButtonBox::Cancel, this);
+    connect(m_buttons, &QDialogButtonBox::accepted, this, &QDialog::accept);
+    connect(m_buttons, &QDialogButtonBox::rejected, this, &QDialog::reject);
+    vl->addWidget(m_buttons);
+
+    m_all_rb->setChecked(true);
+    updateUi();
+
+    connect(m_all_rb, &QRadioButton::toggled, this, &RenumberElementsDialog::updateUi);
+    connect(m_one_rb, &QRadioButton::toggled, this, &RenumberElementsDialog::updateUi);
+}
+
+QString RenumberElementsDialog::selectedSchemeTitle() const
+{
+    if (m_all_rb && m_all_rb->isChecked()) return QString();
+    return m_combo ? m_combo->currentText() : QString();
+}
+
+void RenumberElementsDialog::updateUi()
+{
+    const bool one = m_one_rb && m_one_rb->isChecked();
+    if (m_combo) m_combo->setEnabled(one);
+}

sources/autoNum/ui/renumberelementsdialog.h

@@ -0,0 +1,59 @@
+/*
+    Copyright 2006-2026 The QElectroTech Team
+    This file is part of QElectroTech.
+
+    QElectroTech is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 2 of the License, or
+    (at your option) any later version.
+
+    QElectroTech is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef RENUMBERELEMENTSDIALOG_H
+#define RENUMBERELEMENTSDIALOG_H
+
+#include <QDialog>
+#include <QStringList>
+
+class QComboBox;
+class QRadioButton;
+class QDialogButtonBox;
+
+/**
+ * @brief Simple dialog to pick renumbering scope for elements.
+ *
+ * The user can choose between:
+ *  - all element autonumbering schemes
+ *  - one selected scheme title
+ */
+class RenumberElementsDialog final : public QDialog
+{
+    Q_OBJECT
+
+public:
+    explicit RenumberElementsDialog(const QStringList &scheme_titles, QWidget *parent = nullptr);
+
+    /**
+     * @return Empty string if "all" is selected, otherwise the chosen scheme title.
+     */
+    QString selectedSchemeTitle() const;
+
+private slots:
+    void updateUi();
+
+private:
+    QStringList m_scheme_titles;
+    QRadioButton *m_all_rb = nullptr;
+    QRadioButton *m_one_rb = nullptr;
+    QComboBox *m_combo = nullptr;
+    QDialogButtonBox *m_buttons = nullptr;
+};
+
+#endif // RENUMBERELEMENTSDIALOG_H

sources/bordertitleblock.cpp

@@ -896,10 +896,20 @@ void BorderTitleBlock::updateDiagramContextForTitleBlock(
 	// An empty page-level value means the variable was auto-added to the
 	// folio's Custom tab (#495) but never actually set by the user, so it
 	// must not shadow a real project-level value of the same name (#531).
+	//
+	// That guard has to stop short of removing the key outright, though
+	// (#973). TitleBlockTemplate::interpreteVariables() only replaces a
+	// "%name"/"%{name}" placeholder when "name" is a key in this context at
+	// all -- an unset variable that never makes it in is left as its own
+	// literal placeholder text in the rendered title block, not blank.
+	// So an empty page-level value is skipped only when a real project-level
+	// one is already there to show through; otherwise it still goes in
+	// empty, which is what makes the placeholder resolve to nothing.
 	DiagramContext context = initial_context;
 	foreach (QString key, additional_fields_.keys()) {
-		if (!additional_fields_[key].toString().isEmpty())
-			context.addValue(key, additional_fields_[key]);
+		const QVariant value = additional_fields_[key];
+		if (!value.toString().isEmpty() || !context.contains(key))
+			context.addValue(key, value);
 	}
 
 	// ... overridden by the historical and/or dynamically generated fields

sources/dataBase/projectdatabase.cpp

@@ -17,6 +17,8 @@
 */
 #include "projectdatabase.h"
 
+#include "sqlreadonly.h"
+
 #include "../diagram.h"
 #include "../diagramposition.h"
 #include "../elementprovider.h"
@@ -28,13 +30,15 @@
 #include "../qetproject.h"
 
 #include <QLocale>
+#include <QFile>
 #include <QRegularExpression>
-#include <QSqlError>
-
 #include <QSqlDriver>
+#include <QSqlError>
 #include <sqlite3.h>
 
 
+
+
 /**
 	@brief projectDataBase::projectDataBase
 	Default constructor
@@ -208,6 +212,12 @@ bool projectDataBase::isReadOnlySelect(const QString &query, QString *error)
 */
 QSqlQuery projectDataBase::newQuery(const QString &query, QString *error) {
 	QString reason;
+
+	// First gate: which kind of statement is acceptable here at all. A
+	// textual check is the right tool for that and the wrong tool for
+	// anything else -- see isReadOnlySelect()'s own comment. It is what
+	// keeps ATTACH, BEGIN and PRAGMA out, none of which SQLite itself
+	// considers writes.
 	if (!isReadOnlySelect(query, &reason)) {
 		qWarning().noquote() << "projectDataBase::newQuery: rejected query:" << reason << "--" << query;
 		if (error) {
@@ -215,6 +225,24 @@ QSqlQuery projectDataBase::newQuery(const QString &query, QString *error) {
 		}
 		return QSqlQuery(m_data_base);
 	}
+
+	// Second gate, and the one that actually enforces read-only: SQLite is
+	// asked about the statement it compiled, instead of the text being read
+	// for clues. The first gate cannot see through a CTE prefix --
+	// "WITH x AS (SELECT 1) DELETE FROM element" starts with WITH, contains
+	// no semicolon, and deletes every row. That matters beyond the
+	// custom-query box, because this path is reachable from a file: a
+	// <graphics_table>'s saved <query> is read straight out of the .qet by
+	// ProjectDBModel::fromXml() and executed by fillValue(), so opening or
+	// exporting a project someone else produced would have been enough.
+	if (!QETSql::isSingleReadOnlyStatement(sqliteHandle(&m_data_base), query, &reason)) {
+		qWarning().noquote() << "projectDataBase::newQuery: rejected query:" << reason << "--" << query;
+		if (error) {
+			*error = reason;
+		}
+		return QSqlQuery(m_data_base);
+	}
+
 	return QSqlQuery(query, m_data_base);
 }
 
@@ -291,10 +319,23 @@ void projectDataBase::addElement(Element *element)
 void projectDataBase::removeElement(Element *element)
 {
 	m_content_changed = true;
+	bool changed = false;
+
 	m_remove_element_query.bindValue(":uuid", element->uuid().toString());
-	if(!m_remove_element_query.exec()) {
-		qDebug() << "projectDataBase::removeElement remove error : " << m_remove_element_query.lastError();
+	if (m_remove_element_query.exec()) {
+		changed = true;
 	} else {
+		qDebug() << "projectDataBase::removeElement remove error : " << m_remove_element_query.lastError();
+	}
+
+	m_remove_element_info_query.bindValue(":uuid", element->uuid().toString());
+	if (m_remove_element_info_query.exec()) {
+		changed = true;
+	} else {
+		qDebug() << "projectDataBase::removeElement remove element_info error : " << m_remove_element_info_query.lastError();
+	}
+
+	if (changed) {
 		emit dataBaseUpdated();
 	}
 }
@@ -1131,6 +1172,21 @@ void projectDataBase::prepareQuery()
 	m_remove_element_query = QSqlQuery(m_data_base);
 	m_remove_element_query.prepare(remove_element);
 
+		//REMOVE ELEMENT INFO
+		//element_info has no ON DELETE CASCADE (foreign keys aren't
+		//enforced by this connection), so removeElement() must clear it
+		//explicitly. Without this, the row is orphaned under the removed
+		//element's uuid, and re-adding an element with that same uuid
+		//later -- undo of this same removal, or a redo replaying it --
+		//hits element_info's PRIMARY KEY constraint on element_uuid: the
+		//element re-add succeeds, but its element_info insert silently
+		//fails and is lost. removeDiagram()'s cascade already clears this
+		//table when a whole folio goes, but that does not run for a
+		//single element removed on its own.
+	QString remove_element_info("DELETE FROM element_info WHERE element_uuid=:uuid");
+	m_remove_element_info_query = QSqlQuery(m_data_base);
+	m_remove_element_info_query.prepare(remove_element_info);
+
 		//UPDATE ELEMENT INFO
 	QString update_str("UPDATE element_info SET ");
 	for (auto string : QETInformation::elementInfoKeys()) {
@@ -1245,7 +1301,6 @@ void projectDataBase::bindDiagramInfoValues(QSqlQuery &query, Diagram *diagram)
 	}
 }
 
-#ifdef QET_EXPORT_PROJECT_DB
 /**
 	@brief projectDataBase::sqliteHandle
 	@param db
@@ -1263,6 +1318,7 @@ sqlite3 *projectDataBase::sqliteHandle(QSqlDatabase *db)
 	return handle;
 }
 
+#ifdef QET_EXPORT_PROJECT_DB
 
 /**
  * @brief projectDataBase::exportDb
@@ -1298,27 +1354,19 @@ void projectDataBase::exportDb(projectDataBase *db,
 		return;
 	}
 
-	QString connection_name("export_project_db_" % db->project()->uuid().toString());
-
-	if (true) //Enter in a scope only to nicely use QSqlDatabase::removeDatabase just after the end of the scope
-	{
-		auto file_db = QSqlDatabase::addDatabase("QSQLITE", connection_name);
-		file_db.setDatabaseName(path_);
-		if (!file_db.open()) {
-			return;
-		}
-
-		auto memory_db_handle = sqliteHandle(&db->m_data_base);
-		auto file_db_handle = sqliteHandle(&file_db);
-
-		auto sqlite_backup = sqlite3_backup_init(file_db_handle, "main", memory_db_handle, "main");
-		if (sqlite_backup)
-		{
-			sqlite3_backup_step(sqlite_backup, -1);
-			sqlite3_backup_finish(sqlite_backup);
-		}
-		file_db.close();
+	// VACUUM INTO requires the destination not to exist. QFileDialog may ask
+	// about overwriting, but it does not remove the existing file for us.
+	if (QFile::exists(path_) && !QFile::remove(path_)) {
+		qWarning() << "Unable to replace project database export:" << path_;
+		return;
+	}
+
+	// VACUUM INTO creates a standalone copy of the current database without
+	// requiring access to the SQLite driver's native connection handle.
+	const auto escaped_path = path_.replace("'", "''");
+	QSqlQuery query(db->m_data_base);
+	if (!query.exec("VACUUM INTO '" % escaped_path % "'")) {
+		qWarning() << "Unable to export project database:" << query.lastError().text();
 	}
-	QSqlDatabase::removeDatabase(connection_name);
 }
 #endif

sources/dataBase/projectdatabase.h

@@ -29,7 +29,7 @@ class QETProject;
 class Diagram;
 class Conductor;
 class Terminal;
-class sqlite3;
+struct sqlite3;
 
 /**
 	@brief The projectDataBase class
@@ -61,6 +61,26 @@ class projectDataBase : public QObject
 		QETProject *project() const;
 		QSqlQuery newQuery(const QString &query = QString(), QString *error = nullptr);
 		static bool isReadOnlySelect(const QString &query, QString *error = nullptr);
+
+			/**
+				The most rows any caller reads out of one query result.
+
+				A SELECT is not bounded by how much data the project holds:
+				SQLite produces rows lazily, so a query that never stops
+				producing them makes the loop that reads them never stop
+				either. A recursive CTE does exactly that in one line, and
+				a <graphics_table>'s <query> is stored in the .qet and run
+				on load -- so the text can arrive from a file rather than
+				from the person at the keyboard, and opening that file is
+				the whole attack.
+
+				100000 is far above any real result: the largest table in
+				the shipped examples is 396 rows. It is a backstop, not a
+				page size -- a caller that hits it has almost certainly
+				been handed something it should not run to completion, and
+				says so rather than truncating quietly.
+			*/
+		static constexpr int MaxResultRows = 100000;
 		QSqlDatabase database() const {return m_data_base;}
 		int excludedConductorCount() const;
 
@@ -119,6 +139,7 @@ class projectDataBase : public QObject
 		QSqlQuery m_insert_elements_query,
 				  m_insert_element_info_query,
 				  m_remove_element_query,
+				  m_remove_element_info_query,
 				  m_update_element_query,
 				  m_insert_diagram_query,
 				  m_remove_diagram_query,
@@ -135,9 +156,14 @@ class projectDataBase : public QObject
 				  m_cascade_remove_conductor_query,
 				  m_cascade_remove_element_query;
 
+	public:
+		// Deliberately outside the QET_EXPORT_PROJECT_DB guard below:
+		// newQuery() needs the raw connection to ask SQLite whether a
+		// query only reads, and that check runs in every build.
+		static sqlite3 *sqliteHandle(QSqlDatabase *db);
+
 #ifdef QET_EXPORT_PROJECT_DB
 	public:
-		static sqlite3 *sqliteHandle(QSqlDatabase *db);
 		static void exportDb(projectDataBase *db,
 				     QWidget *parent = nullptr,
 				     const QString &caption = QString(),

sources/dataBase/sqlreadonly.cpp

@@ -0,0 +1,134 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "sqlreadonly.h"
+
+#include <QCoreApplication>
+
+#include <sqlite3.h>
+
+namespace QETSql {
+
+/**
+	@brief QETSql::isSingleReadOnlyStatement
+	Ask SQLite itself whether @p query is exactly one statement, and whether
+	that statement only reads.
+
+	Why SQLite is asked rather than the text inspected: a check on the
+	query's first keyword cannot see what the statement actually does.
+	SQLite has allowed a CTE prefix in front of a data-modifying statement
+	since 3.8.3, so
+
+	@code
+	WITH x AS (SELECT 1) DELETE FROM element
+	@endcode
+
+	begins with WITH, contains no semicolon, and deletes every row.
+	sqlite3_stmt_readonly() reports on the statement SQLite compiled, not
+	on how it was spelled, so the same query is correctly refused here
+	while an ordinary WITH ... SELECT still passes.
+
+	The statement is compiled and immediately finalised; sqlite3_prepare_v2()
+	does not run it, so nothing is executed to reach this verdict.
+
+	This is a read-only test, NOT a statement-type allowlist: SQLite
+	considers ATTACH, BEGIN and several PRAGMAs read-only too, because none
+	of them change the contents of the database. Callers that need to
+	restrict which *kind* of statement is acceptable must say so separately
+	-- projectDataBase::newQuery() keeps isReadOnlySelect() in front of this
+	for exactly that reason.
+
+	@param handle the connection the query would run on. A null handle is
+	refused rather than waved through: without it there is nothing to ask,
+	and guessing from the text is the weakness this exists to replace.
+	@param query the raw SQL text
+	@param error set to a human-readable reason when this returns false
+	@return true if @p query is a single, read-only statement
+*/
+bool isSingleReadOnlyStatement(sqlite3 *handle, const QString &query, QString *error)
+{
+	if (error) {
+		error->clear();
+	}
+
+	if (!handle) {
+		if (error) {
+			*error = QCoreApplication::translate("QETSql",
+				"Impossible de vérifier la requête : "
+				"aucune connexion SQLite disponible.");
+		}
+		return false;
+	}
+
+	const QByteArray utf8 = query.toUtf8();
+	sqlite3_stmt *statement = nullptr;
+	const char *tail = nullptr;
+
+	if (sqlite3_prepare_v2(handle, utf8.constData(), utf8.size(),
+			       &statement, &tail) != SQLITE_OK)
+	{
+		if (error) {
+			*error = QCoreApplication::translate("QETSql",
+					"Requête SQL invalide : %1")
+				 .arg(QString::fromUtf8(sqlite3_errmsg(handle)));
+		}
+		sqlite3_finalize(statement);
+		return false;
+	}
+
+	// Whitespace or a bare comment compiles successfully to no statement
+	// at all, and sqlite3_stmt_readonly() must not be handed that.
+	if (!statement) {
+		if (error) {
+			*error = QCoreApplication::translate("QETSql",
+				"La requête ne contient aucune instruction.");
+		}
+		return false;
+	}
+
+	const bool read_only = sqlite3_stmt_readonly(statement) != 0;
+	sqlite3_finalize(statement);
+
+	if (!read_only) {
+		if (error) {
+			*error = QCoreApplication::translate("QETSql",
+				"Seules les requêtes en lecture seule sont autorisées : "
+				"cette requête modifierait la base de données.");
+		}
+		return false;
+	}
+
+	// tail points just past the first statement, semicolon included.
+	// Anything left once semicolons and spacing are stripped is a second
+	// statement -- caught structurally here, where "SELECT ';'" is a
+	// perfectly ordinary query rather than a suspicious string.
+	if (tail) {
+		QString rest = QString::fromUtf8(tail);
+		rest.remove(QLatin1Char(';'));
+		if (!rest.trimmed().isEmpty()) {
+			if (error) {
+				*error = QCoreApplication::translate("QETSql",
+					"Une seule requête est autorisée.");
+			}
+			return false;
+		}
+	}
+
+	return true;
+}
+
+} // namespace QETSql

sources/dataBase/sqlreadonly.h

@@ -0,0 +1,43 @@
+/*
+	Copyright 2006-2026 The QElectroTech Team
+	This file is part of QElectroTech.
+
+	QElectroTech is free software: you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation, either version 2 of the License, or
+	(at your option) any later version.
+
+	QElectroTech is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef SQLREADONLY_H
+#define SQLREADONLY_H
+
+#include <QString>
+
+struct sqlite3;
+
+/**
+	Deciding whether a piece of SQL only reads.
+
+	Deliberately its own translation unit, depending on nothing but QString
+	and SQLite: it is the enforcement point for every query QElectroTech
+	runs against a project database, including queries that arrive from
+	outside the application (a .qet file's saved report/table query), so it
+	is worth being able to test it in isolation -- see
+	tests/qttest/tst_sqlreadonly.cpp, which links this file and nothing
+	else of QElectroTech.
+*/
+namespace QETSql {
+
+	bool isSingleReadOnlyStatement(sqlite3 *handle,
+				       const QString &query,
+				       QString *error = nullptr);
+}
+
+#endif // SQLREADONLY_H

sources/diagramcommands.cpp

@@ -77,6 +77,23 @@ void PasteDiagramCommand::redo()
 	{
 		first_redo = false;
 
+		//Resolve a linked master/slave pair pasted together (bugtracker
+		//#607) before anything below renews their uuids: at this exact
+		//moment a pasted element's tmp_uuids_link still holds its
+		//source's original partner uuid, which still equals the
+		//not-yet-renewed uuid of that partner's own pasted copy if it
+		//was carried along in the same batch. Scoped to this batch only
+		//(not a project-wide search), so a pair pasted together links to
+		//each other and not to an original element left elsewhere that
+		//happens to still carry that same soon-to-be-replaced uuid. If
+		//only one half of a linked group was pasted, its link entry
+		//simply finds no match here and is dropped -- same "leave it
+		//unlinked" outcome as always.
+		const QList <Element *> elmts_list = content.m_elements;
+		for (Element *e : elmts_list) {
+			e->initLink(elmts_list);
+		}
+
 		//make new uuid for every pasted conductor, because old uuid are
 		//the uuid of the copied conductor
 		const QList <Conductor *> all_pasted_conductors = content.conductors();
@@ -85,7 +102,6 @@ void PasteDiagramCommand::redo()
 		}
 
 		//this is the first paste, we do some actions for the new element
-		const QList <Element *> elmts_list = content.m_elements;
 		for (Element *e : elmts_list)
 		{
 			//make new uuid, because old uuid are the uuid of the copied element

sources/diagramcontext.cpp

@@ -151,8 +151,8 @@ bool DiagramContext::operator!=(const DiagramContext &dc) const
 void DiagramContext::toXml(QDomElement &e, const QString &tag_name) const
 {
 	foreach (QString key, keys()) {
-		if ((tag_name == "elementInformation") &&
-			(m_content[key].toString().trimmed().isEmpty())) {
+		const QString raw = m_content[key].toString();
+		if ((tag_name == "elementInformation") && raw.trimmed().isEmpty()) {
 			continue;
 		}
 		QDomElement property = e.ownerDocument().createElement(tag_name);
@@ -161,7 +161,15 @@ void DiagramContext::toXml(QDomElement &e, const QString &tag_name) const
 		property.removeAttribute("name");
 		property.setAttribute("show", m_content_show[key]);
 		property.setAttribute("name", key);
-		QDomText value = e.ownerDocument().createTextNode(m_content[key].toString().trimmed());
+		// Trim stray leading/trailing whitespace around real content, but
+		// not a value that IS whitespace: unconditionally trimming an
+		// all-whitespace string collapses it to "", which is silently
+		// indistinguishable from a value that was never set. A title-block
+		// custom variable set to a single space -- a workaround for #973,
+		// where an unset variable renders as its own literal placeholder --
+		// would otherwise vanish on the very next save.
+		const QString stored = raw.trimmed().isEmpty() ? raw : raw.trimmed();
+		QDomText value = e.ownerDocument().createTextNode(stored);
 		property.appendChild(value);
 		e.appendChild(property);
 	}

sources/diagramcontext.h

@@ -17,7 +17,7 @@
 */
 #ifndef DIAGRAM_CONTEXT_H
 #define DIAGRAM_CONTEXT_H
-#include "pugixml/src/pugixml.hpp"
+#include "pugixml.hpp"
 
 #include <QDomElement>
 #include <QHash>

sources/diagramevent/diagrameventaddpaste.cpp

@@ -22,6 +22,7 @@
 #include "../qetapp.h"
 #include "../qetdiagrameditor.h"
 #include "../qetgraphicsitem/conductor.h"
+#include "../qetproject.h"
 
 #include <QSettings>
 
@@ -40,6 +41,7 @@
 	DiagramEventAddPaste::DiagramEventAddPaste(Diagram *diagram, const QPointF &start_pos) :
 	DiagramEventInterface(diagram)
 {
+	Q_UNUSED(start_pos);  // items stay at their original XML position
 		//DiagramEventInterface::init() is called by Diagram::setEventInterface
 		//only when it is replacing an earlier interface, so call it here as
 		//DiagramEventAddMacro does.
@@ -51,8 +53,25 @@
 	QDomDocument document_xml;
 	if (!document_xml.setContent(clipboard_text)) return;
 
+		//Batch the database work the same way project loading does
+		//(QETProject::readProjectXml): without this, every addItem()
+		//below emits dataBaseUpdated(), which makes each connected
+		//table model re-run its full SQL query -- ~77 queries for a
+		//typical paste, i.e. the multi-second stall on Ctrl+V.
+	auto *db = m_diagram->project() ? m_diagram->project()->dataBase() : nullptr;
+	if (db) {
+		db->blockSignals(true);
+		db->setUpdateBlocked(true);
+	}
+
 		//Load items at their original XML coordinates.
 	m_diagram->fromXml(document_xml, QPointF(), false, &m_content);
+
+	if (db) {
+		db->blockSignals(false);
+		db->setUpdateBlocked(false);
+		db->updateDB();
+	}
 	if (!m_content.count()) return;
 
 	const QList<QGraphicsItem *> movable = m_content.items(MovableItems);
@@ -85,33 +104,23 @@
 	};
 	const QPointF grid_origin = snapGrid(top_left);
 
-		//Move the group to the cursor, rather than the cursor to the
-		//group. Both put the copy under the pointer, but warping the
-		//pointer also drags it back to the original's position, so the
-		//copy appears exactly on top of what was copied until the mouse
-		//is moved -- which is the thing pasting under the cursor was
-		//meant to avoid (issue #913). Taking the pointer away from
-		//where the user put it is also its own surprise.
-	m_group_origin = snapGrid(start_pos);
-	const QPointF offset = m_group_origin - grid_origin;
-
-		//Store each item's position after the move. moveTo() applies a
+		//Store each item's original position.  moveTo() applies a
 		//grid-snapped delta from the baseline to these, so items
 		//preserve their layout and move in whole grid steps.
 	for (auto *item : movable) {
-		item->setPos(item->pos() + offset);
 		m_relative_pos.insert(item, item->pos());
 	}
+	m_group_origin = grid_origin;
 
-		//The conductors were laid out against the old terminal
+		//The conductors were laid out against the original terminal
 		//positions, so re-route them before anything is drawn.
 	const QList<Conductor *> conductors = m_content.conductors(DiagramContent::AnyConductor);
 	for (auto *conductor : conductors) {
 		conductor->updatePath();
 	}
 
-		//The baseline is known now, so moveTo() does not have to
-		//capture one from the first mouse movement.
+		//The baseline is the group's grid-snapped origin, so moveTo()
+		//does not have to capture one from the first mouse movement.
 	m_initial_cursor = m_group_origin;
 	m_baseline_captured = true;
 
@@ -125,6 +134,14 @@
 			if (const auto qde = QETApp::diagramEditorAncestorOf(view)) {
 				m_status_bar = qde->statusBar();
 			}
+				//Warp the cursor to the group's grid-snapped origin so
+				//the actual cursor position matches m_initial_cursor.
+				//Without this the first mouseMoveEvent computes a large
+				//delta (cursor is still at the Ctrl+V press location)
+				//and the items jump on first touch.
+			const QPoint view_pos = view->mapFromScene(m_initial_cursor);
+			const QPoint global_pos = view->viewport()->mapToGlobal(view_pos);
+			QCursor::setPos(global_pos);
 		}
 	}
 	showHint();

sources/diagramview.cpp

@@ -445,6 +445,82 @@ void DiagramView::pasteHere()
 	paste(mapToScene(m_paste_here_pos));
 }
 
+/**
+	@brief DiagramView::duplicate
+	Copy the current selection and place the copy at @p stepOffset grid
+	steps from it, landing immediately rather than following the cursor
+	like Ctrl+V does (bugtracker #991). @p stepOffset comes from
+	DuplicateOffsetDialog: (1, 0) is one grid step right, (0, -1) is one
+	grid step up, and so on -- QET's own scene axes, X right and Y down.
+
+	No interactive placement step on purpose: the point of a duplicate
+	shortcut is unattended, repeatable stamping (configure the offset
+	once, then tap Ctrl+D to lay out a row), which following the cursor
+	would interrupt on every press. QET already reselects whatever a
+	paste just added (see PasteDiagramCommand::redo()), so the next
+	Ctrl+D naturally continues from the copy just placed, not the
+	original -- a press-and-hold row falls out of that for free, with no
+	special-casing needed here for "keep going from the last one".
+
+	The offset is applied by hand rather than by asking paste()/
+	Diagram::fromXml() to place the copy at a target position. Both of
+	those feed the position through Diagram::snapToGrid(), which reads
+	QApplication::keyboardModifiers() and rounds to the nearest PIXEL
+	instead of the grid whenever Ctrl is held -- and Ctrl is always held
+	here, this action's own shortcut being Ctrl+D. Measured the hard way
+	before settling on this: routing the offset through paste() first
+	produced copies off-grid on both axes, by an amount that tracked the
+	selection's own bounding-box geometry rather than being a fixed
+	error. fromXml() is instead called with no position at all, which
+	leaves every item at its source coordinates (landing the copy
+	exactly on top of the originals -- (0, 0) is not a position, this is
+	"keep the source coordinates"), and the offset is added directly
+	with setPos(). A plain addition cannot be off by a rounding rule
+	that never runs.
+
+	Conductors are not in the translated set: fromXml() itself does not
+	reposition them either -- they are loaded from XML after elements
+	are already in their final place and take their geometry from their
+	terminals, which have already moved with the elements that own
+	them. Likewise dynamic element texts are not translated separately:
+	they are children of their element and move with it under Qt's
+	normal parent-child transform.
+*/
+void DiagramView::duplicate(const QPoint &stepOffset)
+{
+	if (!isInteractive() || m_diagram->isReadOnly()) return;
+
+	const QList<QGraphicsItem *> selection = m_diagram->selectedItems();
+	if (selection.isEmpty()) return;
+
+	QSettings settings;
+	const int x_grid = settings.value(QStringLiteral("diagrameditor/Xgrid"),
+									  Diagram::xGrid).toInt();
+	const int y_grid = settings.value(QStringLiteral("diagrameditor/Ygrid"),
+									  Diagram::yGrid).toInt();
+	const QPointF offset(stepOffset.x() * x_grid, stepOffset.y() * y_grid);
+
+	// Mirrors copy(), but does not touch the system clipboard: Ctrl+D
+	// should not clobber whatever the user last copied with Ctrl+C.
+	QDomDocument document = m_diagram->toXml(false, true);
+
+	DiagramContent pasted;
+	// No position argument -- see the function comment above for why
+	// the offset is not passed here.
+	m_diagram->fromXml(document, QPointF(), false, &pasted);
+	if (!pasted.count()) return;
+
+	const int movable = DiagramContent::Elements | DiagramContent::TextFields
+					   | DiagramContent::Images | DiagramContent::Shapes
+					   | DiagramContent::Tables | DiagramContent::TerminalStrip;
+	for (QGraphicsItem *item : pasted.items(movable))
+		item->setPos(item->pos() + offset);
+
+	m_diagram->clearSelection();
+	m_diagram->undoStack().push(new PasteDiagramCommand(m_diagram, pasted));
+	adjustSceneRect();
+}
+
 /**
 	Manage the events press click :
 	 *  click to add an independent text field
@@ -1401,7 +1477,7 @@ void DiagramView::createTemplateFromSelection()
 
 				collection_node.appendChild(collection_elmt);
 			} else {
-				qDebug() << "Warnung: Konnte XML-Definition für" << old_type << "nicht laden.";
+				qDebug() << "Warning: could not load XML definition for" << old_type;
 			}
 		}
 	}

sources/diagramview.h

@@ -137,6 +137,7 @@ class DiagramView : public PaletteGraphicsView
 		void copy();
 		void paste(const QPointF & = QPointF(), QClipboard::Mode = QClipboard::Clipboard);
 		void pasteHere();
+		void duplicate(const QPoint &stepOffset);
 		void adjustSceneRect();
 		void updateWindowTitle();
 		void resetConductors();

sources/editor/elementview.cpp

@@ -117,6 +117,18 @@ void ElementView::scaleClamped(qreal factor)
 	scale(factor, factor);
 }
 
+/**
+	@brief ElementView::zoom
+	Zoom by an arbitrary factor, for a continuous input such as a 3D mouse.
+	Same clamping as the wheel zoom.
+	@param zoom_factor : > 1 zooms in, < 1 zooms out
+*/
+void ElementView::zoom(qreal zoom_factor)
+{
+	adjustSceneRect();
+	scaleClamped(zoom_factor);
+}
+
 /**
 	Agrandit le schema (+33% = inverse des -25 % de zoomMoins())
 */

sources/editor/elementview.h

@@ -41,6 +41,7 @@ class ElementView : public QGraphicsView {
 	ElementScene *scene() const;
 	void setScene(ElementScene *);
 	QRectF viewedSceneRect() const;
+	void zoom(qreal zoom_factor);
 	
 	protected:
 	void mousePressEvent(QMouseEvent *) override;

sources/editor/ui/elementpropertieseditorwidget.cpp

@@ -17,6 +17,7 @@
 */
 #include "elementpropertieseditorwidget.h"
 
+#include "../../qet.h"
 #include "../../qetapp.h"
 #include "../../qetinformation.h"
 #include "ui_elementpropertieseditorwidget.h"
@@ -185,13 +186,13 @@ void ElementPropertiesEditorWidget::upDateInterface()
 
 		const DiagramContext &info = m_data.m_informations;
 		ui->m_auto_num_locked_cb->setChecked(
-			info.value(QStringLiteral("auto_num_locked")).toString() == QLatin1String("true"));
+			QET::infoFlagIsTrue(info.value(QStringLiteral("auto_num_locked")).toString()));
 		ui->m_potential_isolating_cb->setChecked(
-			info.value(QStringLiteral("potential_isolating")).toString() == QLatin1String("true"));
+			QET::infoFlagIsTrue(info.value(QStringLiteral("potential_isolating")).toString()));
 	}
 
 	ui->m_exclude_from_bom_cb->setChecked(
-		m_data.m_informations.value(QStringLiteral("exclude_from_bom")).toString() == QLatin1String("true"));
+		QET::infoFlagIsTrue(m_data.m_informations.value(QStringLiteral("exclude_from_bom")).toString()));
 
 	on_m_base_type_cb_currentIndexChanged(ui->m_base_type_cb->currentIndex());
 }

sources/editor/ui/qetelementeditor.cpp

@@ -25,6 +25,8 @@
 #include "../../qetapp.h"
 #include "../../qetmainwindow.h"
 #include "../../recentfiles.h"
+#include "../../elementscollectioncache.h"
+#include "../../factory/elementpicturefactory.h"
 #include "../graphicspart/customelementpart.h"
 #include "../elementitemeditor.h"
 #include "../styleeditor.h"
@@ -348,6 +350,24 @@ bool QETElementEditor::toLocation(const ElementsLocation &location)
 									 tr("Impossible d'enregistrer l'élément", "message box content"));
 		return(false);
 	}
+
+		//setXml() just wrote the new drawing to disk, but the preview shown
+		//in the elements panel comes from two caches keyed by path+uuid that
+		//nothing here has told about the change: ElementPictureFactory's
+		//in-memory picture cache and ElementsCollectionCache's on-disk
+		//SQLite cache (see ElementsLocation::icon()). locationWasSaved()
+		//(elementscollectionwidget.cpp) re-reads the icon right after this
+		//call returns, but both caches still hand back the pre-edit pixmap,
+		//so the panel keeps showing the stale preview until the whole
+		//collection is reloaded. Drop and rebuild them here.
+	ElementPictureFactory::instance()->dropCache(location);
+	if (ElementsCollectionCache *cache = QETApp::collectionCache()) {
+		if (cache->fetchData(location)) {
+			cache->cacheName(location.toString(), location.uuid());
+			cache->cachePixmap(location.toString(), location.uuid());
+		}
+	}
+
 	return(true);
 }
 

sources/elementspanelwidget.cpp

@@ -674,6 +674,27 @@ void ElementsPanelWidget::duplicateDiagram()
 		bool erase_labels = settings.value(
 			"diagramcommands/erase-label-on-copy", true).toBool();
 
+		// Resolve a linked pair duplicated together against each other
+		// (bugtracker #607) before the loop below renews their uuids or
+		// clears their pending links: at this exact moment a copy's
+		// tmp_uuids_link still holds its source's original partner
+		// uuid, which still equals the not-yet-renewed uuid of that
+		// partner's own copy if both were duplicated together. Scoped
+		// to this diagram's own copies, not a project-wide search, so
+		// this never links back to the source elements the copies were
+		// made from -- if only one half of a linked pair is here, its
+		// link entry simply finds no match and is dropped, same as
+		// clearPendingLinks() used to do unconditionally for every copy.
+		QList<Element *> new_elements;
+		for (QGraphicsItem *item : new_diagram->items()) {
+			if (Element *elmt = dynamic_cast<Element *>(item)) {
+				new_elements << elmt;
+			}
+		}
+		for (Element *elmt : new_elements) {
+			elmt->initLink(new_elements);
+		}
+
 		for (QGraphicsItem *item : new_diagram->items()) {
 			if (Element *elmt = dynamic_cast<Element *>(item)) {
 				// The XML round-trip kept the source elements' uuids. Give the
@@ -695,9 +716,9 @@ void ElementsPanelWidget::duplicateDiagram()
 					new_diagram->restoreText(elmt);
 				}
 
-				// Clear pending links so copies don't link back to
-				// the source elements via stale UUIDs.
-				elmt->clearPendingLinks();
+				// initLink() above already cleared tmp_uuids_link for
+				// every copy, matched or not -- nothing left here that
+				// could link back to a stale source uuid.
 
 				// Clean up copied element data:
 				// 1. Slaves always lose label/formula/comment/location

sources/elementtextsmover.cpp

@@ -19,6 +19,7 @@
 
 #include "QPropertyUndoCommand/qpropertyundocommand.h"
 #include "diagram.h"
+#include "qetapp.h"
 #include "qetgraphicsitem/dynamicelementtextitem.h"
 #include "qetgraphicsitem/elementtextitemgroup.h"
 
@@ -146,5 +147,5 @@ QString ElementTextsMover::undoText() const
 	if (parts.isEmpty())
 		return QString(); // should never occur
 
-	return QObject::tr("Déplacer %1").arg(QLocale().createSeparatedList(parts));
+	return QObject::tr("Déplacer %1").arg(QLocale(QETApp::interfaceLanguage()).createSeparatedList(parts));
 }

sources/factory/qetgraphicstablefactory.h

@@ -32,8 +32,14 @@ class QetGraphicsTableFactory
 
 		static void createAndAddNomenclature(Diagram *diagram);
 		static void createAndAddSummary(Diagram *diagram);
-	private:
+			// Public so a caller that has already built and configured an
+			// AddTableDialog itself (never shown or exec'd -- the two
+			// methods above always exec() one, which the scripting API
+			// cannot use headlessly) can create a table from it directly.
+			// create() only reads settings already on the dialog; nothing
+			// about it depends on the dialog having been shown.
 		static void create(Diagram *diagram, AddTableDialog *dialog);
+	private:
 		static QetGraphicsTableItem *newTable(
 				Diagram *diagram,
 				AddTableDialog *dialog,

sources/factory/ui/addtabledialog.cpp

@@ -72,6 +72,15 @@ bool AddTableDialog::adjustTableToFolio() const
 	return ui->m_adjust_table_size_cb->isChecked();
 }
 
+/**
+	@brief AddTableDialog::setAdjustTableToFolio
+	@param set
+*/
+void AddTableDialog::setAdjustTableToFolio(bool set)
+{
+	ui->m_adjust_table_size_cb->setChecked(set);
+}
+
 /**
 	@brief AddTableDialog::addNewTableToNewDiagram
 	@return
@@ -81,6 +90,15 @@ bool AddTableDialog::addNewTableToNewDiagram() const
 	return ui->m_add_table_and_folio->isChecked();
 }
 
+/**
+	@brief AddTableDialog::setAddNewTableToNewDiagram
+	@param set
+*/
+void AddTableDialog::setAddNewTableToNewDiagram(bool set)
+{
+	ui->m_add_table_and_folio->setChecked(set);
+}
+
 /**
 	@brief AddTableDialog::tableName
 	@return
@@ -90,6 +108,18 @@ QString AddTableDialog::tableName() const
 	return ui->m_table_name_le->text();
 }
 
+/**
+	@brief AddTableDialog::setTableName
+	Set the name field directly, so a caller that builds this dialog to
+	read from (never shows or execs it -- the scripting API's addTable())
+	does not need a name typed by a user who was never there to type one.
+	@param name
+*/
+void AddTableDialog::setTableName(const QString &name)
+{
+	ui->m_table_name_le->setText(name);
+}
+
 /**
 	@brief AddTableDialog::headerMargins
 	@return

sources/factory/ui/addtabledialog.h

@@ -44,9 +44,12 @@ class AddTableDialog : public QDialog
 
 		void setQueryWidget(QWidget *widget);
 		bool adjustTableToFolio() const;
+		void setAdjustTableToFolio(bool set);
 		bool addNewTableToNewDiagram() const;
+		void setAddNewTableToNewDiagram(bool set);
 
 		QString tableName() const;
+		void setTableName(const QString &name);
 
 		QMargins headerMargins() const;
 		Qt::Alignment headerAlignment() const;

sources/main.cpp

@@ -22,6 +22,8 @@
 #include "logging/eventloopwatchdog.h"
 #include "logging/qetlogger.h"
 #include "machine_info.h"
+#include "diagram.h"
+#include "palettegraphicsview.h"
 #include "qet.h"
 #include "qetapp.h"
 #include "qetmessagebox.h"
@@ -31,6 +33,7 @@
 
 #include <QApplication>
 #include <QDomImplementation>
+#include <QFont>
 
 #include <QStyleFactory>
 #include <QtConcurrentRun>
@@ -105,6 +108,19 @@ int main(int argc, char **argv)
 	// from Qt 6.12 on; opt in explicitly for older Qt 5/6.
 	QDomImplementation::setInvalidDataPolicy(
 		QDomImplementation::ReturnNullNode);
+
+#ifdef Q_OS_WIN
+	// "MS Shell Dlg 2" is not a font but a Windows alias, and many projects
+	// and settings saved on Windows carry it. Qt 5's GDI font backend let
+	// Windows resolve it to Tahoma; Qt 6's DirectWrite backend does not know
+	// the alias and falls back to Arial, so those texts come out heavier on
+	// screen and in exported PDFs (bugtracker #340). Resolve both aliases
+	// the way Windows does. Done before any application object exists so
+	// that the headless export and scripting runs below get it too.
+	QFont::insertSubstitution("MS Shell Dlg 2", "Tahoma");
+	QFont::insertSubstitution("MS Shell Dlg", "Microsoft Sans Serif");
+#endif
+
 	//Creation and execution of the application
 	//HighDPI
 	qputenv("QT_ENABLE_HIGHDPI_SCALING", "1");
@@ -144,6 +160,22 @@ int main(int argc, char **argv)
 #endif
 	}
 
+	// Re-apply the sheet background last picked in the diagram editor, so
+	// every project opened from here on -- existing or new, whichever one
+	// it is -- draws that background instead of the built-in default that
+	// would otherwise force the user to pick it again after each start.
+	//
+	// Done here rather than in main()'s first lines on purpose: the
+	// headless export and scripting runs above return before reaching
+	// this point and must keep rendering on plain white. It also has to
+	// happen before QETApp is constructed below, since that constructor
+	// already loads the projects given on the command line.
+	{
+		const QetSettings::SheetBackground sheet_background = QetSettings::sheetBackground();
+		PaletteGraphicsView::setCustomBackgroundColor(sheet_background.custom);
+		Diagram::background_color = sheet_background.color;
+	}
+
 	// Resolve the logger's state (log directory, session filename, open
 	// file handle) explicitly here, immediately before installing the
 	// handler -- not implicitly on whichever thread happens to log

sources/qet.cpp

@@ -16,9 +16,11 @@
 	along with QElectroTech.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "qet.h"
+#include "qetapp.h"
 #include "qeticons.h"
 #include "shortcutmanager.h"
 
+#include <cmath>
 #include <limits>
 #include <QBuffer>
 #include <QColorDialog>
@@ -243,10 +245,33 @@ bool QET::attributeIsAReal(
 	bool ok;
 	qreal tmp = e.attribute(nom_attribut).toDouble(&ok);
 	if (!ok) return(false);
+	// QString::toDouble() sets ok=true for "nan"/"inf"/"-inf" -- these
+	// parse successfully but are not usable coordinates. A non-finite
+	// element/terminal position reaches Conductor::shape() during load
+	// and hangs there at 100% CPU inside QPainterPathStroker::createStroke(),
+	// confirmed with gdb: not a blocked wait, genuine unbounded computation.
+	if (!std::isfinite(tmp)) return(false);
 	if (reel != nullptr) *reel = tmp;
 	return(true);
 }
 
+/**
+	@brief QET::infoFlagIsTrue
+	@see the header comment for why this exists rather than a bare
+	== "true" comparison.
+	@param value the raw elementInformations string to test
+	@return true if @p value, trimmed and case-folded, is one of the
+	truthy spellings this codebase already accepts elsewhere
+*/
+bool QET::infoFlagIsTrue(const QString &value)
+{
+	const QString v = value.trimmed().toLower();
+	return v == QLatin1String("true")
+		|| v == QLatin1String("1")
+		|| v == QLatin1String("yes")
+		|| v == QLatin1String("on");
+}
+
 /**
 	@brief QET::ElementsAndConductorsSentence
 	Permet de composer rapidement la proposition "x elements et y conducteurs"
@@ -276,7 +301,7 @@ QString QET::ElementsAndConductorsSentence(
 		parts.append(
 			QObject::tr(
 				"%n élément(s)",
-				"part of a enumerative partial sentence listing the content of a diagram",
+				"Sentence fragment used in an automatically generated list of different objects, e.g. objects moved at the same time, which will be combined into a sentence.",
 				elements_count
 			)
 		);
@@ -286,7 +311,7 @@ QString QET::ElementsAndConductorsSentence(
 		parts.append(
 			QObject::tr(
 				"%n conducteur(s)",
-				"part of a enumerative partial sentence listing the content of a diagram",
+				"Sentence fragment used in an automatically generated list of different objects, e.g. objects moved at the same time, which will be combined into a sentence.",
 				conductors_count
 			)
 		);
@@ -296,7 +321,7 @@ QString QET::ElementsAndConductorsSentence(
 		parts.append(
 			QObject::tr(
 				"%n champ(s) de texte",
-				"part of a enumerative partial sentence listing the content of a diagram",
+				"Sentence fragment used in an automatically generated list of different objects, e.g. objects moved at the same time, which will be combined into a sentence.",
 				texts_count
 			)
 		);
@@ -306,7 +331,7 @@ QString QET::ElementsAndConductorsSentence(
 		parts.append(
 			QObject::tr(
 				"%n image(s)",
-				"part of a enumerative partial sentence listing the content of a diagram",
+				"Sentence fragment used in an automatically generated list of different objects, e.g. objects moved at the same time, which will be combined into a sentence.",
 				images_count
 			)
 		);
@@ -316,7 +341,7 @@ QString QET::ElementsAndConductorsSentence(
 		parts.append(
 			QObject::tr(
 				"%n forme(s)",
-				"part of a enumerative partial sentence listing the content of a diagram",
+				"Sentence fragment used in an automatically generated list of different objects, e.g. objects moved at the same time, which will be combined into a sentence.",
 				shapes_count
 			)
 		);
@@ -326,7 +351,7 @@ QString QET::ElementsAndConductorsSentence(
 		parts.append(
 			QObject::tr(
 				"%n texte(s) d'élément",
-				"part of a enumerative partial sentence listing the content of a diagram",
+				"Sentence fragment used in an automatically generated list of different objects, e.g. objects moved at the same time, which will be combined into a sentence.",
 				element_text_count
 			)
 		);
@@ -336,7 +361,7 @@ QString QET::ElementsAndConductorsSentence(
 		parts.append(
 			QObject::tr(
 				"%n tableau(s)",
-				"part of a enumerative partial sentence listing the content of diagram",
+				"Sentence fragment used in an automatically generated list of different objects, e.g. objects moved at the same time, which will be combined into a sentence.",
 				tables_count
 			)
 		);
@@ -346,13 +371,13 @@ QString QET::ElementsAndConductorsSentence(
 		parts.append(
 			QObject::tr(
 				"%n plan(s) de bornes",
-				"part of a enumerative partial sentence listing the content of a diagram",
+				"Sentence fragment used in an automatically generated list of different objects, e.g. objects moved at the same time, which will be combined into a sentence.",
 				terminal_strip_count
 			)
 		);
 	}
 
-	return QLocale().createSeparatedList(parts);
+	return QLocale(QETApp::interfaceLanguage()).createSeparatedList(parts);
 }
 
 /**

sources/qet.h

@@ -161,6 +161,22 @@ namespace QET {
 	bool orthogonalProjection(const QPointF &, const QLineF &, QPointF * = nullptr);
 	bool attributeIsAnInteger(const QDomElement &, const QString& , int * = nullptr);
 	bool attributeIsAReal(const QDomElement &, const QString& , qreal * = nullptr);
+		/**
+			Whether an elementInformations flag (auto_num_locked,
+			potential_isolating, exclude_from_bom, ...) counts as "on".
+			Case-insensitive and tolerant of surrounding whitespace, and
+			accepts the same set of truthy spellings ("true", "1", "yes",
+			"on") that element_nomenclature_view's SQL predicate for
+			exclude_from_bom already does -- see
+			projectDataBase::createElementNomenclatureView(). These flags
+			are only ever written by this app's own checkboxes as literal
+			"true"/"false" today, but a bare == "true" comparison silently
+			treats anything else -- "True", "TRUE", a trailing space from
+			a hand-edited file, a value some other tool wrote -- as off,
+			with no error and no visible difference from the checkbox
+			being genuinely unticked (discussion #785).
+		*/
+	bool infoFlagIsTrue(const QString &value);
 	QString ElementsAndConductorsSentence(int elements=0,
 										  int conductors=0,
 										  int indi_texts=0,

sources/qetapp.cpp

@@ -43,6 +43,10 @@
 #include "machine_info.h"
 #include "TerminalStrip/ui/terminalstripeditorwindow.h"
 #include "qetversion.h"
+#ifdef QET_SPACEMOUSE_SUPPORT
+#	include "spacemouse/spacemouselistener.h"
+#	include "ui/configpage/spacemouseconfigpage.h"
+#endif
 #include "logging/qetlogger.h"
 #include "logging/ui/diagnosticsreportdialog.h"
 
@@ -164,7 +168,24 @@ QETApp::QETApp() :
 		m_splash_screen -> hide();
 	}
     
-	checkBackupFiles();
+#ifdef QET_SPACEMOUSE_SUPPORT
+		//Always safe to construct: it silently does nothing when spacenavd
+		//isn't running or no device is attached, which is the common case
+		//even in a build with this feature compiled in. See
+		//SpaceMouseListener's class comment.
+	m_space_mouse_listener = new SpaceMouseListener(this);
+#endif
+
+		//Deferred so this constructor returns before the prompts appear.
+		//checkBackupFiles() opens modal dialogs, and main() still has work to
+		//do once we return -- in particular connecting
+		//SingleApplication::receivedMessage to receiveMessage(). While those
+		//prompts were up that connection did not exist yet, so a file handed
+		//to the already-running instance during start-up was accepted by the
+		//socket and then dropped on the floor.
+	QMetaObject::invokeMethod(this, [this]() {
+		checkBackupFiles();
+	}, Qt::QueuedConnection);
 }
 
 /**
@@ -236,7 +257,7 @@ QString QETApp::loadedQtTranslationFile()
 void QETApp::setLanguage(const QString &desired_language) {
 	QString languages_path = languagesPath();
 	
-	QLocale::setDefault(QLocale(desired_language));
+	m_interface_language = desired_language;
 
 	// load Qt library translations
 	QString qt_l10n_path = QLibraryInfo::path(QLibraryInfo::TranslationsPath);
@@ -1816,6 +1837,81 @@ void QETApp::useSystemPalette(bool use) {
 	QET::Palette::refreshStyleSheets();
 }
 
+/**
+	@brief QETApp::useCustomPalette
+	Apply a user-chosen color as the application-wide palette.
+	Builds a full QPalette from \a color, keeping the system palette
+	as a fallback for roles we don't touch.
+	@param color the user-chosen base color
+*/
+void QETApp::useCustomPalette(const QColor &color) {
+	if (!color.isValid())
+		return;
+
+	// Derive readable text colors from the chosen color.
+	const bool dark = color.lightness() < 128;
+	const QColor text = dark ? QColor(220, 220, 220) : QColor(30, 30, 30);
+	const QColor disabled_text = dark ? QColor(175, 175, 175) : QColor(128, 128, 128);
+
+	// Slightly lighter/darker for button and window shading.
+	QColor button = color;
+	button = QColor::fromHslF(color.hslHueF(),
+				  color.hslSaturationF(),
+				  dark ? qMin(color.lightnessF() + 0.08, 1.0)
+				       : qMax(color.lightnessF() - 0.08, 0.0));
+	QColor light = QColor::fromHslF(color.hslHueF(),
+					color.hslSaturationF(),
+					dark ? qMin(color.lightnessF() + 0.15, 1.0)
+					     : qMax(color.lightnessF() - 0.15, 0.0));
+	QColor mid = QColor::fromHslF(color.hslHueF(),
+				     color.hslSaturationF(),
+				     dark ? qMin(color.lightnessF() + 0.04, 1.0)
+				          : qMax(color.lightnessF() - 0.04, 0.0));
+	QColor dark_c = QColor::fromHslF(color.hslHueF(),
+					 color.hslSaturationF(),
+					 dark ? qMin(color.lightnessF() - 0.04, 1.0)
+					      : qMax(color.lightnessF() - 0.12, 0.0));
+	QColor shadow = QColor::fromHslF(color.hslHueF(),
+					 color.hslSaturationF(),
+					 dark ? qMin(color.lightnessF() - 0.10, 1.0)
+					      : qMax(color.lightnessF() - 0.20, 0.0));
+
+	QPalette p;
+	// Active and Inactive get the same colors; only Disabled differs.
+	for (auto group : {QPalette::Active, QPalette::Inactive}) {
+		p.setColor(group, QPalette::Window,          color);
+		p.setColor(group, QPalette::WindowText,      text);
+		p.setColor(group, QPalette::Base,            color);
+		p.setColor(group, QPalette::AlternateBase,   button);
+		p.setColor(group, QPalette::Text,            text);
+		p.setColor(group, QPalette::Button,          button);
+		p.setColor(group, QPalette::ButtonText,      text);
+		p.setColor(group, QPalette::BrightText,      dark ? QColor(255,90,90) : Qt::white);
+		p.setColor(group, QPalette::Highlight,       QColor(30, 96, 176));
+		p.setColor(group, QPalette::HighlightedText, Qt::white);
+		p.setColor(group, QPalette::ToolTipBase,     button);
+		p.setColor(group, QPalette::ToolTipText,     text);
+		p.setColor(group, QPalette::Light,           light);
+		p.setColor(group, QPalette::Midlight,        mid);
+		p.setColor(group, QPalette::Mid,             mid);
+		p.setColor(group, QPalette::Dark,            dark_c);
+		p.setColor(group, QPalette::Shadow,          shadow);
+#if QT_VERSION >= QT_VERSION_CHECK(6, 6, 0)
+		p.setColor(group, QPalette::Accent,          QColor(30, 96, 176));
+#endif
+	}
+	p.setColor(QPalette::Disabled, QPalette::WindowText, disabled_text);
+	p.setColor(QPalette::Disabled, QPalette::Text,       disabled_text);
+	p.setColor(QPalette::Disabled, QPalette::ButtonText, disabled_text);
+
+	qApp->setPalette(p);
+	qApp->setStyleSheet(QString());
+
+	// Switch icon theme to match light/dark.
+	applyIconTheme(p);
+	QET::Palette::refreshStyleSheets();
+}
+
 /**
 	@brief QETApp::quitQET
 	Request the closing of all windows;
@@ -2117,6 +2213,9 @@ void QETApp::configureQET()
 	cd.addPage(new ExportConfigPage());
 	cd.addPage(new PrintConfigPage());
 	cd.addPage(new ShortcutsConfigPage());
+#ifdef QET_SPACEMOUSE_SUPPORT
+	cd.addPage(new SpaceMouseConfigPage());
+#endif
 
 	// associates the dialog with a possible parent widget
 	// associe le dialogue a un eventuel widget parent
@@ -2132,6 +2231,12 @@ void QETApp::configureQET()
 	// affiche le dialogue puis evite de le lier a un quelconque widget parent
 	cd.exec();
 	cd.setParent(nullptr, cd.windowFlags());
+
+#ifdef QET_SPACEMOUSE_SUPPORT
+	if (m_space_mouse_listener) {
+		m_space_mouse_listener->reloadSettings();
+	}
+#endif
 }
 
 /**
@@ -2404,7 +2509,13 @@ void QETApp::initStyle()
 
 	//Apply or not the system style
 	QSettings settings;
-	useSystemPalette(settings.value("usesystemcolors", true).toBool());
+	if (settings.value("usesystemcolors", true).toBool()) {
+		useSystemPalette(true);
+	} else if (settings.contains("customapplicationcolor")) {
+		useCustomPalette(QColor(settings.value("customapplicationcolor").toString()));
+	} else {
+		useSystemPalette(false);
+	}
 
 #if defined(Q_OS_MACOS) && QT_VERSION >= QT_VERSION_CHECK(6, 5, 0)
 	// Setting an application palette stops Qt from following the OS
@@ -3045,3 +3156,5 @@ int QETApp::projectId(const QETProject *project) {
 	}
 	return(-1);
 }
+
+QString QETApp::m_interface_language;

sources/qetapp.h

@@ -48,6 +48,9 @@ class QETProject;
 class QETTitleBlockTemplateEditor;
 class QTextOrientationSpinBoxWidget;
 class RecentFiles;
+#ifdef QET_SPACEMOUSE_SUPPORT
+class SpaceMouseListener;
+#endif
 
 /**
 	@brief The QETApp class
@@ -68,6 +71,7 @@ class QETApp : public QObject
 	public:
 		static QETApp *instance();
 		void setLanguage(const QString &);
+		static QString interfaceLanguage() { return m_interface_language; }
 		static QString langFromSetting ();
 		void switchLayout(Qt::LayoutDirection);
 		static void printHelp();
@@ -228,6 +232,13 @@ class QETApp : public QObject
 		static TitleBlockTemplatesFilesCollection *m_company_tbt_collection;
 		static TitleBlockTemplatesFilesCollection *m_custom_tbt_collection;
 		static ElementsCollectionCache *collections_cache_;
+#ifdef QET_SPACEMOUSE_SUPPORT
+			/// One per application, not per window: a physical 6-DOF device
+			/// is a single ambient input source, and motion is applied to
+			/// whichever DiagramView is currently active. See
+			/// SpaceMouseListener's class comment.
+		SpaceMouseListener *m_space_mouse_listener = nullptr;
+#endif
 		static QMap<uint, QETProject *> registered_projects_;
 		static uint next_project_id;
 		static RecentFiles *m_projects_recent_files;
@@ -247,6 +258,8 @@ class QETApp : public QObject
 		static QString m_user_custom_tbt_dir;
 		static QString m_user_macros_dir;
 		
+		static QString m_interface_language;
+	
 	public slots:
 		void systray(QSystemTrayIcon::ActivationReason);
 		void reduceEveryEditor();
@@ -263,6 +276,7 @@ class QETApp : public QObject
 		void setMainWindowVisible(QMainWindow *, bool);
 		void invertMainWindowVisibility(QWidget *);
 		void useSystemPalette(bool);
+		void useCustomPalette(const QColor &color);
 		void quitQET();
 		void checkRemainingWindows();
 		void openFiles(const QETArguments &);

sources/qetdiagrameditor.cpp

@@ -52,11 +52,13 @@
 #include "ui/bomexportdialog.h"
 #include "ui/conductorcolortoolbutton.h"
 #include "ui/diagrambgcolorbutton.h"
+#include "ui/duplicateoffsetdialog.h"
 #include "ui/jumptoelementdialog.h"
 #include "ui/diagrampropertieseditordockwidget.h"
 #include "ui/backupdialog.h"
 #include "ui/dialogwaiting.h"
 #include "undocommand/addelementtextcommand.h"
+#include "utils/qetsettings.h"
 #include "utils/qetutils.h"
 #include "undocommand/rotateselectioncommand.h"
 #include "undocommand/rotatetextscommand.h"
@@ -374,6 +376,46 @@ void QETDiagramEditor::setUpActions()
 					new DiagramEventAddPaste(dv->diagram(), start_pos));
 	});
 
+		//Duplicate: copy the selection and place it at a configured,
+		//grid-step offset immediately -- no interactive follow-the-
+		//cursor step, unlike Ctrl+V above. That is deliberate (#991):
+		//the point of a duplicate shortcut is repeatable, unattended
+		//stamping (configure the offset once, then tap Ctrl+D to lay
+		//out a row), which an interactive placement would interrupt on
+		//every press.
+	m_duplicate = new QAction(QET::Icons::EditCopy, tr("Dupli&quer"), this);
+	ShortcutManager::instance().registerAction(m_duplicate, "diagrameditor.duplicate", tr("Éditeur de schémas"), Qt::CTRL | Qt::Key_D);
+	m_duplicate->setStatusTip(tr("Copie la sélection, décalée de l'espacement configuré", "status bar tip"));
+	connect(m_duplicate, &QAction::triggered, [this]() {
+		auto *dv = currentDiagramView();
+		if (!dv || !dv->diagram()) return;
+
+			//Ask the first time only -- every later press reuses whatever
+			//was confirmed then, so the shortcut can be tapped repeatedly
+			//without an interruption each time. m_configure_duplicate
+			//below is the deliberate way back into this dialog.
+		if (!DuplicateOffsetDialog::hasSavedStepOffset()) {
+			DuplicateOffsetDialog dialog(this);
+			if (dialog.exec() != QDialog::Accepted) return;
+			DuplicateOffsetDialog::saveStepOffset(dialog.stepOffset());
+		}
+		dv->duplicate(DuplicateOffsetDialog::savedStepOffset());
+	});
+
+		//Reopens the dialog above on demand, to change the spacing or
+		//direction a later Ctrl+D should use. Enabled unconditionally
+		//(see slot_updateComplexActions()): it only ever writes a
+		//setting, so it does not need a diagram open or anything
+		//selected the way m_duplicate itself does.
+	m_configure_duplicate = new QAction(tr("Configurer la duplication..."), this);
+	m_configure_duplicate->setStatusTip(tr("Choisir l'espacement et la direction utilisés par Dupliquer", "status bar tip"));
+	connect(m_configure_duplicate, &QAction::triggered, [this]() {
+		DuplicateOffsetDialog dialog(this);
+		if (dialog.exec() == QDialog::Accepted) {
+			DuplicateOffsetDialog::saveStepOffset(dialog.stepOffset());
+		}
+	});
+
 		//Reset conductor path
 	m_conductor_reset = new QAction(QET::Icons::ConductorSettings,     tr("Réinitialiser les conducteurs"),        this);
 	ShortcutManager::instance().registerAction(m_conductor_reset, "diagrameditor.conductor_reset", tr("Éditeur de schémas"), Qt::CTRL | Qt::Key_K);
@@ -894,6 +936,7 @@ void QETDiagramEditor::setUpToolBar()
 	main_tool_bar -> addAction(m_cut);
 	main_tool_bar -> addAction(m_copy);
 	main_tool_bar -> addAction(m_paste);
+	main_tool_bar -> addAction(m_duplicate);
 	main_tool_bar -> addSeparator();
 	main_tool_bar -> addAction(m_delete_selection);
 	main_tool_bar -> addAction(m_rotate_selection);
@@ -985,6 +1028,8 @@ void QETDiagramEditor::setUpMenu()
 	menu_edition -> addAction(m_cut);
 	menu_edition -> addAction(m_copy);
 	menu_edition -> addAction(m_paste);
+	menu_edition -> addAction(m_duplicate);
+	menu_edition -> addAction(m_configure_duplicate);
 	menu_edition -> addSeparator();
 		//The same actions the "Ajouter" toolbar holds. They were toolbar-only,
 		//which left them unreachable for anyone working without a mouse: a
@@ -1811,7 +1856,18 @@ void QETDiagramEditor::selectionGroupTriggered(QAction *action)
 			diagram->undoStack().push(c);
 	}
 	else if (value == "rotate_selected_text")
-		diagram->undoStack().push(new RotateTextsCommand(diagram));
+	{
+			//Ask for the angle first, then build the command: the command
+			//itself no longer opens a dialog. Guarding on the selection keeps
+			//the previous behaviour of showing no dialog when there is
+			//nothing to rotate.
+		if (RotateTextsCommand::hasSelectedTexts(diagram))
+		{
+			qreal rotation = 0;
+			if (RotateTextsCommand::askRotation(rotation))
+				diagram->undoStack().push(new RotateTextsCommand(diagram, rotation));
+		}
+	}
 	else if (value == "find_selected_element" && currentElement())
 		findElementInPanel(currentElement()->location());
 	else if (value == "edit_selected_element")
@@ -1947,6 +2003,7 @@ void QETDiagramEditor::slot_updateComplexActions()
 			    << m_find_element
 			    << m_cut
 			    << m_copy
+			    << m_duplicate
 			    << m_delete_selection
 			    << m_rotate_selection
 			    << m_rotate_group_selection
@@ -1976,6 +2033,7 @@ void QETDiagramEditor::slot_updateComplexActions()
 	bool deletable_items = dc.hasDeletableItems();
 	m_cut              -> setEnabled(!ro && copiable_items);
 	m_copy             -> setEnabled(copiable_items);
+	m_duplicate        -> setEnabled(!ro && copiable_items);
 	m_delete_selection -> setEnabled(!ro && deletable_items);
 	m_rotate_selection -> setEnabled(!ro && diagram_->canRotateSelection());
 	m_rotate_group_selection -> setEnabled(!ro && diagram_->canRotateSelection());
@@ -3122,6 +3180,29 @@ void QETDiagramEditor::slot_runScript() {
 	QETProject *project = currentProject();
 	if (!project) return;
 
+	// Scripting is off until somebody says otherwise, so the first use has
+	// to ask. Asking here rather than greying the action out keeps the
+	// feature discoverable: a disabled menu entry tells a user that
+	// something exists and nothing about how to have it.
+	if (!QetSettings::scriptingEnabled()) {
+		const QMessageBox::StandardButton answer = QET::QetMessageBox::question(
+			this,
+			tr("Exécuter un script"),
+			tr("Les scripts sont désactivés.\n\n"
+			   "Un script s'exécute avec vos droits : il peut lire et "
+			   "modifier le projet ouvert et écrire des fichiers. "
+			   "N'exécutez que des scripts dont vous connaissez "
+			   "l'origine.\n\n"
+			   "Activer les scripts ? Ce réglage est modifiable dans "
+			   "Configurer QElectroTech > Général > Projets."),
+			QMessageBox::Yes | QMessageBox::Cancel,
+			QMessageBox::Cancel);
+		if (answer != QMessageBox::Yes) {
+			return;
+		}
+		QetSettings::setScriptingEnabled(true);
+	}
+
 	const QString script_path = QFileDialog::getOpenFileName(
 		this,
 		tr("Exécuter un script"),

sources/qetdiagrameditor.h

@@ -199,6 +199,8 @@ class QETDiagramEditor : public QETMainWindow
 		*undo,				///< Cancel the latest action
 		*redo,				///< Redo the latest cancelled operation
 		*m_paste,			///< Paste clipboard content on the current diagram
+		*m_duplicate,			///< Copy selection, offset by the configured step (#991)
+		*m_configure_duplicate,		///< Reopen the duplicate offset/direction dialog (#991)
 		*m_auto_conductor,		///< Enable/Disable the use of auto conductor
 		*m_auto_break_conductor,	///< Enable/Disable the use of auto break conductor
 		*m_draw_grid,			///< Switch the background grid display or not

sources/qetgraphicsitem/ViewItem/projectdbmodel.cpp

@@ -379,6 +379,21 @@ void ProjectDBModel::fillValue()
 	
 	while (query_.next())
 	{
+		//This query text comes out of the project file, so its result is
+		//not bounded by anything the project actually contains: a
+		//recursive CTE produces rows for as long as anyone reads them.
+		//Without this, opening such a file hangs QElectroTech at 100% CPU
+		//while m_record grows until memory runs out. @see
+		//projectDataBase::MaxResultRows.
+		if (m_record.size() >= projectDataBase::MaxResultRows) {
+			qWarning().noquote()
+				<< "ProjectDBModel: query stopped after"
+				<< projectDataBase::MaxResultRows
+				<< "rows, which is far more than a folio table can show."
+				<< "The table is incomplete. Query:" << m_query;
+			break;
+		}
+
 		QStringList record_;
 		auto i=0;
 		while (query_.value(i).isValid())

sources/qetgraphicsitem/conductor.cpp

@@ -1310,6 +1310,34 @@ const QList<ConductorSegment *> Conductor::segmentsList() const
 	return(segments_vector);
 }
 
+/**
+	@brief Conductor::moveSegment
+	Move one segment of this conductor by (dx, dy), the same primitive
+	handlerMouseMoveEvent()/handlerMouseReleaseEvent() apply on a manual
+	drag -- moveX()/moveY() each silently no-op on the wrong axis or a
+	static (terminal-anchored) segment, so both are always called and
+	whichever applies takes effect. Unlike a drag this commits the whole
+	move as a single undo step.
+	@param index a segmentsList() index
+	@param dx @param dy the movement, in the diagram's own coordinates
+	@return false if index is out of range
+*/
+bool Conductor::moveSegment(int index, qreal dx, qreal dy)
+{
+	const QList<ConductorSegment *> segs = segmentsList();
+	if (index < 0 || index >= segs.count()) return false;
+
+	before_mov_text_pos_ = m_text_item->pos();
+	ConductorSegment *seg = segs.at(index);
+	seg->moveX(dx);
+	seg->moveY(dy);
+	modified_path = true;
+	segmentsToPath();
+	calculateTextItemPosition();
+	saveProfile();
+	return true;
+}
+
 /**
 	@brief Conductor::length
 	@return the length of this conductor

sources/qetgraphicsitem/conductor.h

@@ -114,6 +114,7 @@ class Conductor : public QGraphicsObject
 	public:
 		QVector <QPointF> handlerPoints() const;
 		const QList<ConductorSegment *> segmentsList() const;
+		bool moveSegment(int index, qreal dx, qreal dy);
 
 		void setPropertyToPotential(
 				const ConductorProperties &property,

sources/qetgraphicsitem/dynamicelementtextitem.cpp

@@ -33,6 +33,7 @@
 #include <QDomElement>
 #include <QtCore/qnumeric.h>
 #include <QGraphicsSceneMouseEvent>
+#include <QAbstractTextDocumentLayout>
 
 /**
 	@brief DynamicElementTextItem::DynamicElementTextItem
@@ -732,9 +733,6 @@ void DynamicElementTextItem::paint(QPainter *painter, const QStyleOptionGraphics
 {
 	DiagramTextItem::paint(painter, option, widget);
 
-	if (m_left_resize_handle || m_right_resize_handle)
-		updateResizeHandlesPos();
-
 	if (m_frame)
 	{
 		painter->save();
@@ -826,10 +824,7 @@ QVariant DynamicElementTextItem::itemChange(QGraphicsItem::GraphicsItemChange ch
 	}
 	else if (change == QGraphicsItem::ItemSelectedHasChanged)
 	{
-		if (value.toBool())
-			addResizeHandles();
-		else
-			removeResizeHandles();
+		refreshResizeHandlesVisibility();
 	}
 	else if (change == QGraphicsItem::ItemSceneHasChanged && !scene())
 	{
@@ -878,6 +873,31 @@ bool DynamicElementTextItem::sceneEventFilter(QGraphicsItem *watched, QEvent *ev
 	return false;
 }
 
+/**
+	@brief DynamicElementTextItem::refreshResizeHandlesVisibility
+	Show the resize handles when this text is selected directly, OR when its
+	parent element is -- which is what an ordinary click without Shift
+	selects (DynamicElementTextItem::mousePressEvent() forwards a plain
+	click to the parent, so dragging a symbol by its label moves the whole
+	symbol; a pre-existing, unrelated behaviour, left untouched here).
+	Without this, the handles were reachable only via Shift+click or a
+	right-click's context menu, neither of which a user reaches for to
+	resize a text field (qelectrotech#591, reported by @arummler).
+
+	Called from itemChange() -- both this item's own ItemSelectedHasChanged,
+	below, and Element::itemChange() on the parent's, which calls this on
+	every one of its texts. Not from paint(): see the comment there for why
+	that crashed.
+*/
+void DynamicElementTextItem::refreshResizeHandlesVisibility()
+{
+	const bool handles_wanted = isSelected() || (m_parent_element && m_parent_element->isSelected());
+	if (handles_wanted && !m_left_resize_handle)
+		addResizeHandles();
+	else if (!handles_wanted && m_left_resize_handle)
+		removeResizeHandles();
+}
+
 /**
 	@brief DynamicElementTextItem::addResizeHandles
 	Create and show the two width-resize handles (left/right edge of
@@ -895,11 +915,17 @@ void DynamicElementTextItem::addResizeHandles()
 
 	for (QetGraphicsHandlerItem *handle : {m_left_resize_handle, m_right_resize_handle})
 	{
-		scene()->addItem(handle);
+			//Children of this text, not free scene items: Qt then carries
+			//them along when the parent element moves, rotates or is
+			//zoomed, and repaints their old and new area in the same
+			//update as this text. Moving free items from paint() instead
+			//left green fragments behind (qelectrotech#1002).
+		handle->setParentItem(this);
 		handle->setColor(Qt::darkGreen);
-		handle->setZValue(zValue() + 1);
 		handle->installSceneEventFilter(this);
 	}
+	m_resize_handles_con = connect(document()->documentLayout(), &QAbstractTextDocumentLayout::documentSizeChanged,
+								   this, &DynamicElementTextItem::updateResizeHandlesPos);
 
 	updateResizeHandlesPos();
 }
@@ -909,6 +935,7 @@ void DynamicElementTextItem::addResizeHandles()
 */
 void DynamicElementTextItem::removeResizeHandles()
 {
+	disconnect(m_resize_handles_con);
 	delete m_left_resize_handle;
 	delete m_right_resize_handle;
 	m_left_resize_handle = nullptr;
@@ -917,20 +944,32 @@ void DynamicElementTextItem::removeResizeHandles()
 
 /**
 	@brief DynamicElementTextItem::updateResizeHandlesPos
-	Keep the two resize handles at the vertical middle of frameRect()'s left
-	and right edges, in scene coordinates -- called on every paint() so it
-	stays correct across every kind of change that can move this item or
+	Keep the two resize handles at the vertical middle of boundingRect()'s
+	left and right edges, in scene coordinates -- called on every paint() so
+	it stays correct across every kind of change that can move this item or
 	change its size (position, rotation, font, text, textWidth...) without
 	needing a dedicated hook for each one.
+
+	Deliberately boundingRect(), not frameRect(): frameRect() is a tight box
+	around the text's own natural (idealWidth()) size, re-centred inside
+	boundingRect() -- it does not grow with textWidth(). Once a text has
+	been widened, that leaves a growing gap between the tight frame and the
+	dashed selection outline QGraphicsView draws at boundingRect(), which is
+	the box a user actually sees and expects a resize handle to sit on
+	(qelectrotech#591, reported by @arummler: "the drag elements should be
+	on the border of the box"). boundingRect() reflects the full
+	textWidth() (it is QGraphicsTextItem's own, driven by the document's
+	laid-out size), so the handles now track the box that is visibly
+	resized rather than the text glyphs inside it.
 */
 void DynamicElementTextItem::updateResizeHandlesPos()
 {
 	if (!m_left_resize_handle || !m_right_resize_handle)
 		return;
 
-	QRectF fr = frameRect();
-	m_left_resize_handle->setPos(mapToScene(QPointF(fr.left(), fr.center().y())));
-	m_right_resize_handle->setPos(mapToScene(QPointF(fr.right(), fr.center().y())));
+	QRectF br = boundingRect();
+	m_left_resize_handle->setPos(br.left(), br.center().y());
+	m_right_resize_handle->setPos(br.right(), br.center().y());
 }
 
 /**
@@ -1289,9 +1328,15 @@ void DynamicElementTextItem::updateLabel()
 		
 
 		if(m_text_from == ElementInfo && element) {
-			setPlainText(element->actualLabel());
+			QString new_label = element->actualLabel();
+			if (toPlainText() != new_label) {
+				setPlainText(new_label);
+			}
 		}
 		else if (m_text_from == CompositeText) {
+			// Use actualLabel() to ensure %{label} reflects the current
+			// resolved label (e.g. after a folio/page-number change)
+			dc.addValue(QStringLiteral("label"), element->actualLabel());
 			setPlainText(autonum::AssignVariables::replaceVariable(m_composite_text, dc));
 		}
 	}