Each Increment spin box had a fixed maximum width of 55 px. The Windows
11 style puts the up and down arrows side by side, which leaves almost
nothing of 55 px for the number (#1566). The boxes now take the width
their style asks for.
Test: tst_autonumincrementwidth runs the editor under a style that
widens spin boxes the way the Windows 11 style does and checks each
Increment box is at least as wide as the style needs: 55 px against 81
px before this change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1533 stopped the panel shrinking to its title bar when the selection
had nothing to edit, so that it would keep the height the user gave it
(#1439). Users want the room back for the Collections and Auto numbering
panels while nothing is selected (#1566).
The panel's layout is back to QLayout::SetMaximumSize, so the empty
panel shrinks as before. Just before its last editor goes, the panel
keeps the heights of every docked panel in its area; when an editor
comes back it gives them back with QMainWindow::resizeDocks, the call a
separator drag makes. Giving only this panel its height back fell 35 px
short in the test: the neighbours had been split again from their size
hints and gave up only part of the room.
Test: tst_selectionpanelheight now checks, twice over, that the empty
panel shrinks and that selecting an element again brings back the height
the user gave it. Without the restore the panel comes back at 470 px
instead of 560; on master the empty panel does not shrink.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
QETZ-DB-FIRST stage 2b-2. The save writes the numbering schemes and
their settings from the project database's numbering rows (2b-1)
instead of the project's own lists. The project still keeps the rows
in step after each change, and QET_CHECK_NUMBERING_ROWS still says
whether the two agree, until the lists go (2b-3).
tst_elementautonumids::numberingRowsFollowEveryChange also checks the
saved file: the current symbol and wire numbering and the schemes. With
setCurrrentElementAutonum() not writing the rows, a save straight after
it now names the old scheme in use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A --run script is stopped after 30 s: on industrial.qet the 23 saves
took 23 s natively and did not finish under AddressSanitizer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
QETZ-DB-FIRST stage 2b-1. The numbering schemes of wires, symbols,
folios and cables, and the settings saved with them (the scheme in use
of each kind, freezing new labels, auto-break, the cable axis and
question), get three tables of the project database: numbering_scheme,
numbering_part (one row per part, in order) and numbering_setting.
QETProject writes them when it reads its file and after each change of
its numbering, from every setter; nothing reads them yet.
The save writes the numbering through writeNumberingXml(), the code it
had moved out of writeDefaultPropertiesXml(), so the same writer can
take the rows once the save moves to them (2b-2).
QET_CHECK_NUMBERING_ROWS=1 writes the numbering from the project and
from the rows at each save and says whether the two differ.
tst_elementautonumids::numberingRowsFollowEveryChange checks it after
each of 23 changes; with one setter not writing the rows, one save
differs and it fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A double click on a linked folio report showed the other end's folio
and highlighted it, but left the mouse pointer where it was, on every
platform, while only Wayland forbids a program to move it. On Windows,
X11 and macOS the pointer is now put on the end jumped to, once the
folio shown has its size (next turn of the event loop), so that a
second double click jumps back. On Wayland the highlight alone still
shows where the jump landed.
The pointing hand over a report's label text also stayed after a
click: mousePressEvent() puts the text colour back, and the cursor was
only unset with the colour in hoverLeaveEvent(). It is now always
unset when the mouse leaves the text.
Narrower, a long word ran out of the text's box while the short lines
were still aligned inside the too narrow width: on a right aligned or
centred text a lone "1" stood in the middle under its words, and moved
on every step. Found on a real plan (-XS20, "Steckdosen Windfang, 1").
The probe checks that no line runs out of the text after narrowing, and
also for a text aligned bottom left.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The text moves on every step of a drag to keep its alignment point in
place. Mapping the mouse with its current transform made the delta grow
with every step, so a right or centre aligned text ran away: 90 px of
mouse gave +1220 px of width. The probe now drags in 30 steps and checks
the width grows by exactly as much as the mouse moved.
Reported by ispyisail in the review of #1555.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Which point of a symbol's text stays in place while its width is
dragged now follows the text's alignment, the nine points of its
alignment dialog, rather than the handle: a text aligned top right
keeps its top right corner whichever handle is dragged, one centred
keeps its middle, and a text that wraps grows away from that point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Narrowing a symbol's text with the left handle until it wraps onto
more lines moved it up: the point kept in place was the middle of the
opposite edge, and the middle moves down as the text grows. Keep the
top of the opposite edge instead, or the middle or the bottom for a
text aligned that way, for both handles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging the left width handle of a symbol's text changed its width but
kept its position, which is its left edge: the right edge moved with the
drag and the text jumped away from where the user held it. Now the edge
opposite the dragged handle stays in place, as in a drawing program and
as the corner handles of a free text already do (TextResizeHandles). It
is found along the text's own baseline, so a rotated text behaves the
same. Undo restores width and position together, with TextResizeCommand.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Placing a group switches its alignment, which lays its texts out anew.
Undoing to AlignJustify, the default of the "Label and comment" group,
lays out nothing, so the texts stayed at their placed offsets. The
positions of the group's texts are now part of the undo step. The probe
reproduces the case from a group with freely placed texts.
Reported by ispyisail in the review of #1563.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each of the nine points has its own icon: a grey square for the symbol
and two bars for the lines of text, where they will go and lined up as
they will be. The grid shows them instead of arrows, and the toolbar
button takes the icon of the point chosen last, so that one sees where
a click on it puts the texts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new command, "Place symbol texts", for the selected symbols: their
label and the notes beside it go as one block next to the drawing of
the symbol, 3 px away, at one of the nine points of the text alignment
dialog, chosen in a 3 x 3 grid that opens from the toolbar button and
from the Edit menu. A click on the button places them at the point
chosen last (left of the symbol at first).
Left of the symbol the lines are aligned right, so that they hang on it
and a longer text grows away from it (their alignment is set too);
right of it aligned left; above, below and on it centred. The lines
keep their order and their spacing, a group of texts is placed as one
line with the same alignment, a turned symbol is placed in the folio's
directions, and everything is one undo step.
Element::drawingRect() gives the area the drawing covers, tighter than
the bounding rect, which is rounded up to the grid. A toolbar command
with a menu now shows as a button with an arrow beside it.
Translations for all languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Feedback on a real plan: zooming in on the end jumped to was too much.
A jump now shows the target's folio whole, as a page (the view's fit),
selects the target and shades it and its texts blue for three seconds,
so that the eye finds the label too. One function, Element::jumpTo(),
serves the double click on the arrow and on the text.
The mouse pointer is not moved onto the target: Wayland does not let a
program move the pointer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A linked folio report now shows a pointing hand under the mouse, on its
arrow as well as on the text that shows its label (which already turned
blue), and a double click on the arrow goes to the other end, as a
double click on the text did. Before, a double click on the arrow opened
the report's properties, which stay reachable from the context menu and
the properties panel.
The end jumped to is highlighted for two seconds, with the same blue as
the hover highlight but independent of it: the hover highlight is
cleared as soon as the mouse leaves the end jumped from, so on the same
folio the user saw nothing mark where the jump landed.
The text of a linked slave that shows its master's label gets the same
blue and hand, since a double click on it already jumped to the master.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
element_nomenclature_view gave an element's own plant and location only,
which are empty unless typed into every element. A project structured by
its folios (=plant +location on the title block, %M / %LM) therefore
showed no place in the BOM, nomenclature tables and queries, although the
folio says where each device is -- the way EPLAN builds the device tag
from the page structure.
The view now falls back to the folio's plant and location when the
element has none of its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The menu entry and its status tip in every translation file, added by
hand next to "Display or hide the grid of sheet" so that the files are
not rewritten by lupdate. German: "Fadenkreuz über die ganze Seite".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every formula evaluation constructed a QSettings, although only element
formulas read it (border-columns_0, for %c). Constructing QSettings is
costly, on Windows a registry lookup, and conductor labels are evaluated
in bulk: Conductor::refreshText() runs for every wire of a folio when it
is built, and for every wire of every built folio when the project or a
title block changes.
Debug build, 40 folios with 4,280 numbered wires:
- refreshText() of every wire: 1,136-1,264 ms before, 203-208 ms after
- opening the project (database fill): 2.24-2.48 s before, 1.46-1.59 s after
- building 39 lazy folios: 15.0-15.3 s before, 12.3-12.5 s after
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new option in the Display menu, off by default and kept in the
settings: two thin lines cross the whole folio, inside its border,
through the grid point under the mouse, so that one sees at a glance
whether symbols and terminals are in line, also while dragging them.
They are drawn by the view in drawForeground(), on screen only: no item
is added to the folio, so nothing of them is saved, exported or
printed. Only the strips the lines leave and enter are repainted, and
they go when the mouse leaves the view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While no 3D mouse is plugged in, which for most users is always, the
hidapi backend looks for one every 3 seconds for as long as
QElectroTech runs. It asked hidapi for every HID device,
hid_enumerate(0, 0), and on Windows hidapi reads the serial number,
manufacturer and product strings of each device that matches what it
is asked for from the device itself. So every mouse, keyboard, headset
and webcam on the PC was asked for its names every 3 seconds, on the
GUI thread. Issue #1553 reports the pointer moving by itself on Windows
since the first package with this backend; nothing else in that package
talks to devices. SDL 2.0.9 polled the same way and saw freezes and a
keyboard that kept re-initialising (libsdl-org/SDL#3071).
The scan now asks for 3Dconnexion's vendor id, and for each 3D mouse
made under Logitech's id by its product id, since most other mice and
keyboards carry Logitech's id too. That is twelve hidapi calls instead
of one, but a device that does not match is no longer asked for its
names. On Linux and macOS hidapi takes the names from the system, and
one call is cheaper than twelve (on Linux, median of 200: 5 ms against
36 ms), so the scan there is unchanged.
Where the scan is filtered, a Logitech-id device that is not one of the
eleven 3D mice on the list is no longer found, even if it reports
itself as a multi-axis controller. 3Dconnexion's own mice and keyboards,
such as the CadMouse, are still asked: their vendor id is asked for as
a whole, so that new 3D mice are found without a list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add an automatic import which groups the free terminals of a project
by the part of their label before the first colon ("X1:2" goes to the
strip "X1"), creates the strips missing and sorts the terminals in
natural order, as one undoable step.
The import runs when the terminal block manager opens on a project and
can be run again from a new toolbar action. It only adds : the strips
already known keep their terminals and their order, and terminals
without label are left free.
A project opened before the element collection panel's first load is
queued until the load starts; one opened during a load goes into the
model being loaded. ElementsCollectionWidget::removeProject() only
removed the project from the model already shown, so a project closed
in either window stayed in the collection, and the next reload read the
freed project (crash in XmlElementCollection::root()).
removeProject() now also takes the project out of the queue and out of
the model being loaded. That model waits for its loading threads, which
read the project, and drops the project's items from the list applied
when the loading ends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Closing a modified project and choosing Discard left the project in the
project tree. The panel removed its item, but the project still emits
projectInformationsChanged() while it is torn down (setModified()), and
GenericPanel answered by adding the project back, with items for its
sheets. Once the project was freed, a click on one of those sheets
called diagram->showMe() on a freed Diagram: SIGSEGV in
QObjectPrivate::maybeSignalConnected(), the backtrace reported on the
forum (topic 3215).
The panel now stops listening to a project when it is closed, to its
sheets and to its embedded title block collection, before removing its
item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
scorpio810's condition for the database as the model (#1512): a lossless
round trip between the formats, tested in CI. For every example and for
fixtures/every_feature.qet, the save stamps aside:
- a .qetz saved again is the same file;
- a .qetz saved as a .qet is the project saved straight as a .qet;
- that .qet saved as a .qetz is the project saved straight as a .qetz,
part by part, its database row by row;
- lazy folios save what every folio built saves, in both formats.
fixtures/every_feature.qet (arummler's test file, #1512) was built through
QElectroTech's script API: four folios, numbering schemes with every kind
of part, a coil linked to three contacts, folio reports, terminals, a
cable, wires with every property, every symbol information field, symbol
texts of every source, independent texts, shapes, a curve, a picture, a
PLC master with its inputs and outputs, a terminal strip bridged, a parts
list and a folio summary, copied, rotated and mirrored symbols. What the
API cannot set was added in the form QElectroTech saves it (new-folio
defaults, a folio field of the user's, single-line wires, a wire text
moved by hand, a coloured symbol text, a text group, an old information
key, a parts list continued on a fourth folio), then QElectroTech opened
and saved it. Of every tag and attribute QElectroTech wrote saving the
341 projects of our corpus, it holds all those found in 5 or more of them
and 98.3 % of all; it also holds what none of them has (terminal strips,
PLC data, tables).
It failed before the previous commit (the .qetz saved again had its folio
parts in another order).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ispyisail