Merge pull request #918 from Kellermorph/fix-colour-selection

Persist QColorDialog custom colors across application restarts

.github/workflows/auto-doxygen.yml

@@ -11,7 +11,6 @@ jobs:
     permissions:
        contents: write    
     runs-on: ubuntu-latest
-    if: github.ref == 'refs/heads/master'
     steps:
     - uses: actions/checkout@v4
       with:

.github/workflows/linux-build.yml

@@ -0,0 +1,79 @@
+# Linux build, unit tests, and the IPC open-forwarding regression gate.
+#
+# The existing workflows build Windows and generate documentation; nothing
+# builds QElectroTech on Linux or runs tests/ in CI. This does both.
+#
+# It runs inside an ubuntu:26.04 container rather than directly on the runner
+# because the IPC gate below needs Qt 6.10.2. The ubuntu-latest image ships
+# Qt 6.4, and whether the crash that gate covers reproduces on 6.4 has never
+# been checked -- a gate that cannot go red is worse than no gate.
+name: Linux build and tests
+
+on:
+  push:
+    branches: [master]
+  pull_request:
+  workflow_dispatch:
+
+jobs:
+  linux:
+    name: Build and test (Qt 6, Debug)
+    runs-on: ubuntu-latest
+    container: ubuntu:26.04
+
+    steps:
+      - name: Install build and test dependencies
+        run: |
+          apt-get update
+          DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
+            ca-certificates build-essential cmake ninja-build git pkg-config \
+            qt6-base-dev qt6-base-private-dev qt6-tools-dev qt6-tools-dev-tools \
+            libqt6svg6-dev libqt6sql6-sqlite libsqlite3-dev libcups2-dev \
+            libxkbcommon-x11-0 \
+            xvfb openbox xdotool x11-utils
+          # extra-cmake-modules and the KF6 libraries are installed rather than
+          # left to FetchContent: without them CMake builds extra-cmake-modules
+          # from source, and its Qt Help documentation target then demands
+          # Qt6{Core,Gui,Widgets,DBus}Tools, failing the configure with an error
+          # that appears to be about QElectroTech and is not.
+          DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \
+            extra-cmake-modules libkf6coreaddons-dev libkf6widgetsaddons-dev \
+            qt6-svg-plugins
+
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - name: Configure
+        # Debug, not Release. Whether a use-after-free faults depends on what
+        # the allocator does with the freed block: the commit before #868
+        # crashes every time built Debug and survives every time built
+        # -O3 -DNDEBUG, so a Release job would never catch a regression here.
+        run: |
+          git config --global --add safe.directory "$GITHUB_WORKSPACE"
+          cmake -B build -G Ninja \
+            -DCMAKE_BUILD_TYPE=Debug \
+            -DQT_VERSION_MAJOR=6
+
+      - name: Build
+        run: cmake --build build --parallel $(nproc)
+
+      - name: Unit tests
+        run: xvfb-run -a ctest --test-dir build --output-on-failure
+
+      - name: IPC open-forwarding regression (#868)
+        # Fails the job only on an actual crash. An inconclusive run means the
+        # crash path was not exercised -- it proves nothing, which is not the
+        # same as a regression, and failing on it would make this job flaky
+        # rather than informative.
+        run: |
+          set +e
+          tests/ipc-regression/run.sh --binary build/qelectrotech
+          status=$?
+          set -e
+          case $status in
+            0) echo "::notice::IPC gate passed" ;;
+            2) echo "::warning::IPC gate inconclusive -- the crash path was not exercised, nothing was proven" ;;
+            *) echo "::error::IPC gate failed -- forwarded files are being opened inside the socket handler again"
+               exit 1 ;;
+          esac

.github/workflows/windows-build.yml

@@ -1,22 +1,33 @@
 name: Windows Build
 
 on:
-  push:
-    branches: [ master ]
-  pull_request:
-    branches: [ master ]
-  workflow_dispatch:
+  schedule:
+    - cron: '0 2 1 * *' #
+  workflow_dispatch:       # Manual trigger available at any time
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}
   cancel-in-progress: true
 
 jobs:
-  build-windows:
+  # =============================================================================
+  # Job 1: Windows build (Qt6/KF6 — sole track since the Qt5 track was removed)
+  #
+  # Version label: the C++ source (sources/qetversion.cpp) intentionally stays
+  # Qt-agnostic — QT_VERSION-based detection inside the binary proved unreliable
+  # (see commit e1aa65f, reverting 608ca984). Here the CI job itself knows with
+  # certainty which Qt major version it configured (-DQT_VERSION_MAJOR=6), so it
+  # is safe to label the *package* "0.200.1" at this level, without touching
+  # QetVersion::currentVersion() or making the binary self-detect its Qt build.
+  #
+  # Job id kept as "build-windows-qt6" (not renamed to "build-windows") in case
+  # branch protection / required status checks reference this exact job name.
+  # =============================================================================
+  build-windows-qt6:
     runs-on: windows-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v7
         with:
           submodules: recursive
           fetch-depth: 0
@@ -33,10 +44,11 @@ jobs:
             mingw-w64-ucrt-x86_64-gcc
             mingw-w64-ucrt-x86_64-cmake
             mingw-w64-ucrt-x86_64-ninja
-            mingw-w64-ucrt-x86_64-qt5-base
-            mingw-w64-ucrt-x86_64-qt5-svg
-            mingw-w64-ucrt-x86_64-qt5-tools
-            mingw-w64-ucrt-x86_64-qt5-translations
+            mingw-w64-ucrt-x86_64-qt6-base
+            mingw-w64-ucrt-x86_64-qt6-svg
+            mingw-w64-ucrt-x86_64-qt6-tools
+            mingw-w64-ucrt-x86_64-qt6-translations
+            mingw-w64-ucrt-x86_64-qt6-pdf
             mingw-w64-ucrt-x86_64-sqlite3
             mingw-w64-ucrt-x86_64-pkg-config
             mingw-w64-ucrt-x86_64-kwidgetsaddons
@@ -44,15 +56,16 @@ jobs:
             mingw-w64-ucrt-x86_64-extra-cmake-modules
             mingw-w64-ucrt-x86_64-nsis
             mingw-w64-ucrt-x86_64-angleproject
+            mingw-w64-ucrt-x86_64-qt6-declarative
 
       - name: Cache ccache
-        uses: actions/cache@v4
+        uses: actions/cache@v5
         with:
           path: C:\Users\runneradmin\AppData\Local\ccache
-          key: ccache-windows-${{ github.ref_name }}-${{ github.sha }}
+          key: ccache-windows-qt6-${{ github.ref_name }}-${{ github.sha }}
           restore-keys: |
-            ccache-windows-${{ github.ref_name }}-
-            ccache-windows-
+            ccache-windows-qt6-${{ github.ref_name }}-
+            ccache-windows-qt6-
 
       - name: Configure ccache
         shell: msys2 {0}
@@ -87,15 +100,6 @@ jobs:
             echo "  OK font size patched to 10"
           fi
 
-      - name: Force Qt5 — remove Qt6 cmake + tools
-        shell: msys2 {0}
-        run: |
-          set -euo pipefail
-          rm -rf /ucrt64/lib/cmake/Qt6
-          pacman -R --noconfirm mingw-w64-ucrt-x86_64-qt6-tools 2>/dev/null || true
-          echo "=== windeployqt binaries ==="
-          ls /ucrt64/bin/windeployqt* || echo "NO windeployqt found!"
-
       - name: Build with cmake
         shell: msys2 {0}
         run: |
@@ -108,12 +112,14 @@ jobs:
           cmake -G Ninja \
             -DCMAKE_BUILD_TYPE=Release \
             -DCMAKE_PREFIX_PATH=/ucrt64 \
-            -DQt5_DIR=/ucrt64/lib/cmake/Qt5 \
-            -DQT_VERSION_MAJOR=5 \
-            -DCMAKE_DISABLE_FIND_PACKAGE_Qt6=ON \
-            -DBUILD_TESTING=OFF \
+            -DQt6_DIR=/ucrt64/lib/cmake/Qt6 \
+            -DQT_VERSION_MAJOR=6 \
+            -DBUILD_WITH_KF=ON \
+            -DBUILD_KF=OFF \
+            -DPACKAGE_TESTS=OFF \
+            -DCMAKE_POLICY_DEFAULT_CMP0077=NEW \
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5 \
-            -DCMAKE_CXX_FLAGS="-DQET_EXPORT_PROJECT_DB" \
+            -DQET_EXPORT_PROJECT_DB=ON \
             -DCMAKE_C_COMPILER_LAUNCHER=/ucrt64/bin/ccache \
             -DCMAKE_CXX_COMPILER_LAUNCHER=/ucrt64/bin/ccache \
             -DSQLite3_INCLUDE_DIR=/ucrt64/include \
@@ -155,7 +161,7 @@ jobs:
           cp "$EXE" "$BIN/QElectroTech.exe"
 
           cd "$BIN"
-          /ucrt64/bin/windeployqt-qt5 \
+          /ucrt64/bin/windeployqt6 \
             --release \
             --no-translations \
             --no-compiler-runtime \
@@ -205,17 +211,78 @@ jobs:
           cp -r "$GITHUB_WORKSPACE/build-aux/windows/nsis_base/." "$NSIS_ROOT/"
 
           curl -fsSL \
-            "https://raw.githubusercontent.com/qelectrotech/qelectrotech-source-mirror/refs/heads/master/misc/Lancer%20QET.bat" \
-            -o "$FILES/Lancer QET.bat"
+            "https://raw.githubusercontent.com/qelectrotech/qelectrotech-source-mirror/refs/heads/master/misc/Lancer%20QET_qt6.bat" \
+            -o "$FILES/Lancer QET_qt6.bat"
           cp -r "$GITHUB_WORKSPACE/elements"    "$FILES/elements"    || true
           cp -r "$GITHUB_WORKSPACE/titleblocks" "$FILES/titleblocks" || true
           cp -r "$GITHUB_WORKSPACE/examples"    "$FILES/examples"    || true
           cp -r "$GITHUB_WORKSPACE/fonts"       "$FILES/fonts"       || true
 
-          cp -r "$GITHUB_WORKSPACE/lang"        "$FILES/lang"        || true
-          find "$GITHUB_WORKSPACE/build" -name "*.qm" -exec cp {} "$FILES/lang/" \; 2>/dev/null || true
-          echo "=== .qm files in files/lang/ ==="
-          ls "$FILES/lang/"*.qm 2>/dev/null | wc -l || echo "0 .qm files"
+          # --- Translations ---
+          # Since PR #751 the .qm files are no longer tracked in git: lrelease
+          # generates them in build/lang/ (OUTPUT_LOCATION "lang", relative to
+          # the build dir). Expected set = the .ts listed in TS_FILES
+          # (cmake/qet_compilation_vars.cmake): a missing .qm fails the job
+          # instead of silently shipping an untranslated build; a .ts present
+          # in lang/ but not listed in TS_FILES only raises a warning.
+          # find/grep only, no shell glob: $GITHUB_WORKSPACE is a Windows path
+          # (D:\a\...) and its backslashes break glob patterns.
+          QM_SRC="$GITHUB_WORKSPACE/build/lang"
+          mkdir -p "$FILES/lang"
+          TS_LISTED=$(grep -o 'lang/qet_[A-Za-z_]*\.ts' "$GITHUB_WORKSPACE/cmake/qet_compilation_vars.cmake" \
+                        | sed -e 's#^lang/##' -e 's#\.ts$##' | LC_ALL=C sort -u || true)
+          [ -n "$TS_LISTED" ] || { echo "ERROR: cannot read TS_FILES from cmake/qet_compilation_vars.cmake"; exit 1; }
+          TS_PRESENT=$(find "$GITHUB_WORKSPACE/lang" -maxdepth 1 -name 'qet_*.ts' -exec basename {} .ts \; | LC_ALL=C sort)
+          UNLISTED=$(LC_ALL=C comm -13 <(echo "$TS_LISTED") <(echo "$TS_PRESENT"))
+          if [ -n "$UNLISTED" ]; then
+            echo "::warning::.ts files not in TS_FILES, no .qm built:" $UNLISTED
+          fi
+          find "$QM_SRC" -maxdepth 1 -name 'qet_*.qm' -exec cp {} "$FILES/lang/" \; 2>/dev/null || true
+          QM_PRESENT=$(find "$FILES/lang" -maxdepth 1 -name 'qet_*.qm' -exec basename {} .qm \; | LC_ALL=C sort)
+          MISSING=$(LC_ALL=C comm -23 <(echo "$TS_LISTED") <(echo "$QM_PRESENT"))
+          QM_COUNT=$(printf '%s\n' "$QM_PRESENT" | grep -c . || true)
+          TS_COUNT=$(printf '%s\n' "$TS_LISTED" | grep -c .)
+          echo "=== $QM_COUNT .qm files copied to files/lang/ (expected: $TS_COUNT) ==="
+          if [ -n "$MISSING" ]; then
+            echo "ERROR: missing translations:" $MISSING
+            find "$GITHUB_WORKSPACE/build" -name '*.qm' || true
+            exit 1
+          fi
+
+          # Qt's own translations (OK/Cancel buttons, standard dialogs...):
+          # they come from qtbase_XX.qm, not from QET's .ts, and windeployqt
+          # runs with --no-translations. QETApp::setLanguage() falls back to
+          # lang/qt_XX.qm, so copy each qtbase_XX.qm there under that name
+          # (qtbase_XX.qm is standalone, unlike Qt's qt_XX.qm meta catalogs).
+          QT_TR_DIR=/ucrt64/share/qt6/translations
+          if [ ! -d "$QT_TR_DIR" ]; then
+            QT_TR_DIR=$(cygpath -u "$(/ucrt64/bin/qtpaths6 --query QT_INSTALL_TRANSLATIONS 2>/dev/null)" 2>/dev/null || true)
+          fi
+          find "$QT_TR_DIR" -maxdepth 1 -name 'qtbase_*.qm' 2>/dev/null | while read -r f; do
+            l=$(basename "$f" .qm)
+            cp "$f" "$FILES/lang/qt_${l#qtbase_}.qm"
+          done
+          # QET languages Qt only ships with a region (pt -> pt_PT, zh -> zh_CN):
+          # QTranslator only shortens codes (fr_FR -> fr), it never extends them.
+          for q in $TS_LISTED; do
+            l=${q#qet_}
+            if [ ! -e "$FILES/lang/qt_$l.qm" ]; then
+              if [ -e "$QT_TR_DIR/qtbase_${l}_${l^^}.qm" ]; then
+                alt="$QT_TR_DIR/qtbase_${l}_${l^^}.qm"
+              else
+                alt=$(find "$QT_TR_DIR" -maxdepth 1 -name "qtbase_${l}_*.qm" 2>/dev/null | LC_ALL=C sort | head -1 || true)
+              fi
+              if [ -n "$alt" ]; then
+                cp "$alt" "$FILES/lang/qt_$l.qm"
+              fi
+            fi
+          done
+          QT_QM_COUNT=$(find "$FILES/lang" -maxdepth 1 -name 'qt_*.qm' | wc -l)
+          echo "=== $QT_QM_COUNT Qt translation files (qt_*.qm) copied from $QT_TR_DIR ==="
+          if [ "$QT_QM_COUNT" -eq 0 ]; then
+            echo "ERROR: no qtbase_*.qm found in '$QT_TR_DIR' (mingw-w64-ucrt-x86_64-qt6-translations installed?)"
+            exit 1
+          fi
 
           for f in LICENSE ChangeLog CREDIT README ELEMENTS.LICENSE; do
             cp "$GITHUB_WORKSPACE/$f" "$FILES/$f" 2>/dev/null || true
@@ -223,7 +290,7 @@ jobs:
 
           echo "=== Verification of key files in files/ ==="
           for f in LICENSE ChangeLog CREDIT README ELEMENTS.LICENSE \
-                   qet_uninstall_file_associations.reg register_filetypes.bat "Lancer QET.bat"; do
+                   qet_uninstall_file_associations.reg register_filetypes.bat "Lancer QET_qt6.bat"; do
             [ -f "$FILES/$f" ] \
               && echo "  OK      : $f" \
               || echo "  MISSING: $f"
@@ -234,7 +301,7 @@ jobs:
               || echo "  MISSING: $d/"
           done
 
-      - name: Extract version for installer name
+      - name: Extract version for installer name (Qt6 — labelled 0.200.1)
         shell: msys2 {0}
         id: qet_version
         run: |
@@ -245,16 +312,16 @@ jobs:
           A=$(git -C "$GITHUB_WORKSPACE" rev-list HEAD --count)
           HEAD=$(( A + 473 ))
 
-          VERSION=$(grep 'return QVersionNumber{' "$GITHUB_WORKSPACE/sources/qetversion.cpp" \
-            | head -1 \
-            | awk -F '{' '{ print $2 }' \
-            | awk -F '}' '{ print $1 }' \
-            | sed -e 's/,/./g' -e 's/ //g')
-          [ -z "$VERSION" ] && VERSION="dev"
+          # Deliberately NOT parsed from sources/qetversion.cpp: the CI job
+          # already knows for certain it configured Qt6 (-DQT_VERSION_MAJOR=6),
+          # so the "0.200.1" version label is set here explicitly rather than
+          # relying on in-binary Qt version detection.
+          VERSION="0.200.1"
 
-          FULL_VERSION="${VERSION}-r${HEAD}-${GITCOMMIT}_x86_64-win64"
+          FULL_VERSION="${VERSION}-qt6-r${HEAD}-${GITCOMMIT}_x86_64-win64"
+          BASE_VERSION="${VERSION}-qt6"
           echo "version=$FULL_VERSION"      >> "$GITHUB_OUTPUT"
-          echo "base_version=$VERSION"      >> "$GITHUB_OUTPUT"
+          echo "base_version=$BASE_VERSION" >> "$GITHUB_OUTPUT"
           echo "gitcommit=$GITCOMMIT"       >> "$GITHUB_OUTPUT"
           echo "head=$HEAD"                 >> "$GITHUB_OUTPUT"
           echo "VERSION    : $VERSION"
@@ -308,54 +375,99 @@ jobs:
 
       - name: Upload build logs on failure
         if: failure()
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
         with:
-          name: build-logs
+          name: build-logs-qt6
           path: |
             build/CMakeFiles/*.log
             nsis_root/files/bin/
           if-no-files-found: warn
 
+      - name: Zip portable (readytouse)
+        id: zip_portable
+        shell: pwsh
+        run: |
+          $version = "${{ steps.qet_version.outputs.base_version }}"
+          $head    = "${{ steps.qet_version.outputs.head }}"
+          $zipName = "qelectrotech-${version}+git${head}-x86-win64-readytouse.zip"
+          $src     = "$env:GITHUB_WORKSPACE\nsis_root\files"
+          $dst     = "$env:GITHUB_WORKSPACE\dist\$zipName"
+          $7z      = "C:\Program Files\7-Zip\7z.exe"
+
+          New-Item -ItemType Directory -Force -Path "$env:GITHUB_WORKSPACE\dist" | Out-Null
+          & $7z a -tzip -mx=5 -mmt=on $dst "$src\*"
+          if ($LASTEXITCODE -ne 0) { exit $LASTEXITCODE }
+
+          $sizeMB = [math]::Round((Get-Item $dst).Length / 1MB, 1)
+          Write-Output "ZIP created: $zipName ($sizeMB MB)"
+          "zip_name=$zipName" | Out-File -FilePath $env:GITHUB_OUTPUT -Encoding utf8 -Append
+
       - name: Upload portable (files/ without installer)
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
         with:
           name: qelectrotech-${{ steps.qet_version.outputs.base_version }}+git${{ steps.qet_version.outputs.head }}-x86-win64-readytouse
-          path: nsis_root/files/
-          retention-days: 14
+          path: dist/${{ steps.zip_portable.outputs.zip_name }}
+          retention-days: 40
 
       - name: Upload NSIS installer
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v7
         with:
-          name: qelectrotech-windows-installer
+          name: qelectrotech-windows-installer-qt6
           path: dist/Installer_*.exe
-          retention-days: 14
+          retention-days: 40
+
+      - name: Upload portable (nom fixe pour le workflow MSI)
+        uses: actions/upload-artifact@v7
+        with:
+          name: qelectrotech-windows-portable-qt6
+          path: nsis_root/files/
+          retention-days: 40
 
   # ---------------------------------------------------------------------------
-  # Job 2 : Publie une release nightly + page GitHub Pages
+  # Job 2 : Publie les assets nightly (exe + zip) sur la release
   # Ne tourne que sur push master (pas sur les PRs)
   # ---------------------------------------------------------------------------
-  deploy-pages:
-    needs: build-windows
+  publish-nightly-assets:
+    needs: [build-windows-qt6]
     runs-on: ubuntu-latest
     if: github.event_name != 'pull_request'
     permissions:
       contents: write
 
     steps:
-      - name: Checkout gh-pages branch
-        uses: actions/checkout@v4
-        with:
-          ref: gh-pages
-          path: gh-pages
-
       - name: Download installer artifact
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v8
         with:
-          name: qelectrotech-windows-installer
+          pattern: qelectrotech-windows-installer*
           path: downloaded/installer/
+          merge-multiple: true
+
+      - name: Download portable artifact
+        uses: actions/download-artifact@v8
+        with:
+          pattern: qelectrotech-*-readytouse
+          path: downloaded/portable/
+          merge-multiple: true
+
+      # Only Qt6-tagged assets are deleted/replaced here. Assets without "qt6"
+      # in the name are the frozen Qt5 legacy build (last one ever published,
+      # before the Qt5 CI job was removed) — deliberately left untouched so
+      # they stay downloadable indefinitely instead of disappearing.
+      - name: Delete old nightly Qt6 assets (.exe and .zip)
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          REPO: ${{ github.repository }}
+        run: |
+          gh release view nightly --repo "$REPO" --json assets \
+            --jq '.assets[] | select(.name | test("qt6")) | select(.name | test("\\.(exe|zip)$")) | .name' \
+          | while read -r name; do
+              echo "Deleting old Qt6 asset: $name"
+              gh release delete-asset nightly "$name" --repo "$REPO" --yes
+            done
+          echo "Old Qt6 .exe and .zip assets deleted (legacy Qt5 assets left untouched)."
 
       - name: Update nightly release
-        uses: softprops/action-gh-release@v2
+        uses: softprops/action-gh-release@v3
         with:
           tag_name: nightly
           name: "Nightly Build – Windows"
@@ -368,190 +480,16 @@ jobs:
             | **Run** | https://github.com/${{ github.repository }}/actions/runs/${{ github.run_id }} |
             | **Date** | ${{ github.event.head_commit.timestamp }} |
 
-            > ⚠️ This release is overwritten on every push to `master`.
+            > ⚠️ This is a development version; it introduces new features you want, but may cause bugs that have not yet been identified yet.
             > For stable releases, see the [Releases page](https://github.com/${{ github.repository }}/releases).
+
+            > 🗄️ Files without `-qt6-` in the name are the last Qt5 build ever published (frozen, unmaintained). Files tagged `-qt6-` are the actively maintained build.
           prerelease: true
           make_latest: false
-          files: downloaded/installer/*.exe
+          files: |
+            downloaded/installer/*.exe
+            downloaded/portable/*.zip
           token: ${{ secrets.GITHUB_TOKEN }}
 
-      - name: Generate download page (index.html)
-        run: |
-          DATE=$(date -u '+%Y-%m-%d %H:%M UTC')
-          SHORT="${{ github.sha }}"
-          SHORT="${SHORT:0:7}"
-          REPO="${{ github.repository }}"
-          RUN_URL="https://github.com/$REPO/actions/runs/${{ github.run_id }}"
-          EXE_NAME=$(ls downloaded/installer/*.exe | xargs -I{} basename {})
-          INSTALLER_URL="https://github.com/$REPO/releases/download/nightly/$EXE_NAME"
-
-          mkdir -p gh-pages
-          cat > gh-pages/index.html << HTMLEOF
-          <!DOCTYPE html>
-          <html lang="en">
-          <head>
-            <meta charset="UTF-8">
-            <meta name="viewport" content="width=device-width, initial-scale=1.0">
-            <title>QElectroTech – Nightly Builds</title>
-            <style>
-              *, *::before, *::after { box-sizing: border-box; margin: 0; padding: 0; }
-              body {
-                font-family: -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, sans-serif;
-                background: #f0f4f8;
-                color: #2d3748;
-                min-height: 100vh;
-              }
-              header {
-                background: linear-gradient(135deg, #1a365d 0%, #2b6cb0 100%);
-                color: white;
-                padding: 48px 24px 40px;
-                text-align: center;
-              }
-              header h1 { font-size: 2.2em; letter-spacing: -0.5px; margin-bottom: 8px; }
-              header p  { opacity: 0.8; font-size: 1.05em; }
-              main {
-                max-width: 680px;
-                margin: 40px auto;
-                padding: 0 20px 60px;
-              }
-              .card {
-                background: white;
-                border-radius: 12px;
-                padding: 28px;
-                margin-bottom: 24px;
-                box-shadow: 0 2px 12px rgba(0,0,0,0.08);
-              }
-              .card h2 {
-                font-size: 1em;
-                text-transform: uppercase;
-                letter-spacing: 0.06em;
-                color: #718096;
-                margin-bottom: 16px;
-              }
-              .meta {
-                font-size: 0.875em;
-                color: #4a5568;
-                line-height: 1.8;
-                margin-bottom: 20px;
-              }
-              .meta a { color: #2b6cb0; text-decoration: none; }
-              .meta a:hover { text-decoration: underline; }
-              .badge {
-                display: inline-block;
-                background: #ebf8ff;
-                color: #2b6cb0;
-                border-radius: 4px;
-                font-size: 0.8em;
-                font-weight: 600;
-                padding: 2px 8px;
-                margin-left: 6px;
-                vertical-align: middle;
-              }
-              .warning {
-                background: #fffbeb;
-                border-left: 4px solid #f6ad55;
-                border-radius: 4px;
-                padding: 12px 16px;
-                font-size: 0.875em;
-                color: #744210;
-                margin-bottom: 24px;
-                line-height: 1.5;
-              }
-              .warning a { color: #c05621; }
-              .downloads { display: flex; flex-direction: column; gap: 12px; }
-              .btn {
-                display: flex;
-                align-items: center;
-                gap: 12px;
-                padding: 14px 20px;
-                border-radius: 8px;
-                font-size: 0.95em;
-                font-weight: 600;
-                text-decoration: none;
-                transition: transform 0.1s, box-shadow 0.1s;
-              }
-              .btn:hover {
-                transform: translateY(-1px);
-                box-shadow: 0 4px 12px rgba(0,0,0,0.15);
-              }
-              .btn-primary { background: #2b6cb0; color: white; }
-              .btn-secondary { background: #edf2f7; color: #2d3748; }
-              .btn-icon { font-size: 1.3em; }
-              .btn-text small {
-                display: block;
-                font-weight: 400;
-                font-size: 0.8em;
-                opacity: 0.75;
-                margin-top: 1px;
-              }
-              footer {
-                text-align: center;
-                font-size: 0.8em;
-                color: #a0aec0;
-                padding: 32px 0 0;
-              }
-              footer a { color: #718096; text-decoration: none; }
-            </style>
-          </head>
-          <body>
-            <header>
-              <h1>⚡ QElectroTech</h1>
-              <p>Nightly Windows Builds</p>
-            </header>
-
-            <main>
-              <div class="card">
-                <h2>Build info</h2>
-                <div class="meta">
-                  📅 &nbsp;<strong>$DATE</strong><br>
-                  🔀 &nbsp;Commit <a href="https://github.com/$REPO/commit/${{ github.sha }}"><code>$SHORT</code></a><br>
-                  🔧 &nbsp;<a href="$RUN_URL">CI Run #${{ github.run_number }}</a>
-                  <span class="badge">nightly</span>
-                </div>
-                <div class="warning">
-                  ⚠️ These builds are generated automatically on every commit to <code>master</code>
-                  and may be unstable or incomplete.
-                  For production use, download a
-                  <a href="https://github.com/$REPO/releases">stable release</a>.
-                </div>
-              </div>
-
-              <div class="card">
-                <h2>🪟 Windows — x86_64</h2>
-                <div class="downloads">
-                  <a class="btn btn-primary" href="$INSTALLER_URL">
-                    <span class="btn-icon">⬇</span>
-                    <span class="btn-text">
-                      Windows Installer
-                      <small>.exe — recommended, includes all dependencies</small>
-                    </span>
-                  </a>
-                  <a class="btn btn-secondary" href="https://github.com/$REPO/releases/tag/nightly">
-                    <span class="btn-icon">📦</span>
-                    <span class="btn-text">
-                      All nightly files on GitHub
-                      <small>Release page with checksums</small>
-                    </span>
-                  </a>
-                </div>
-              </div>
-            </main>
-
-            <footer>
-              Auto-generated by GitHub Actions &nbsp;·&nbsp;
-              <a href="https://github.com/$REPO">Source on GitHub</a> &nbsp;·&nbsp;
-              <a href="https://qelectrotech.org">qelectrotech.org</a>
-            </footer>
-          </body>
-          </html>
-          HTMLEOF
-
-      - name: Commit and push to gh-pages
-        run: |
-          cd gh-pages
-          git config user.name "github-actions[bot]"
-          git config user.email "github-actions[bot]@users.noreply.github.com"
-          git add index.html
-          git diff --staged --quiet \
-            || git commit -m "nightly: build #${{ github.run_number }} (${{ github.sha }})"
-          git push origin gh-pages
+      # GitHub Pages is generated and deployed by windows-msi.yml
+      # after the MSI upload, so that all URLs (exe/zip/msi) are known.

.github/workflows/windows-msi.yml

@@ -0,0 +1,456 @@
+name: Windows MSI (WiX v7)
+
+on:
+  # Triggered automatically after a successful Windows build on master
+  workflow_run:
+    workflows: ["Windows Build"]
+    types: [completed]
+    branches: [master]
+  # Manual trigger still available (e.g. for a specific run_id)
+  workflow_dispatch:
+    inputs:
+      run_id:
+        description: "Run ID of 'Windows Build' (leave empty for automatic)"
+        required: false
+        default: ""
+
+jobs:
+  build-msi:
+    name: Build MSI with WiX v7 (${{ matrix.flavor }})
+    runs-on: windows-latest
+    # Only runs if Windows Build succeeded (or triggered manually)
+    if: >
+      github.event_name == 'workflow_dispatch' ||
+      github.event.workflow_run.conclusion == 'success'
+
+    strategy:
+      fail-fast: false
+      # Single-entry matrix kept on purpose (rather than flattening the job):
+      # matrix.flavor is used as part of the MSI ProductCode seed, so changing
+      # it would generate a new ProductCode and break upgrade detection for
+      # existing installs. Keeping "qt6" here preserves continuity.
+      matrix:
+        include:
+          - flavor: qt6
+            portable_artifact: qelectrotech-windows-portable-qt6
+            version_source: hardcoded    # see note in "Extract version" step
+            label_suffix: "-qt6"
+            experimental: false
+
+    permissions:
+      contents: write
+      pages: write
+      id-token: write  # Required by SignPath
+
+    env:
+      SIGNPATH_API_TOKEN: ${{ secrets.SIGNPATH_API_TOKEN }}
+
+    outputs:
+      qt6_msi: ${{ steps.export.outputs.msi_name_qt6 }}
+
+    steps:
+      # ----------------------------------------------------------------
+      # 1. Checkout (to retrieve QElectroTech.wxs and sources)
+      # ----------------------------------------------------------------
+      - name: Checkout
+        uses: actions/checkout@v7
+        with:
+          fetch-depth: 0
+
+      # ----------------------------------------------------------------
+      # 2. Download the portable artifact for this flavor
+      # ----------------------------------------------------------------
+      - name: Download portable artifact
+        uses: actions/download-artifact@v8
+        with:
+          name: ${{ matrix.portable_artifact }}
+          path: artifact\files
+          # workflow_run => use the triggering run's ID
+          # workflow_dispatch => use input run_id if provided, otherwise current run
+          run-id: ${{ github.event.workflow_run.id || github.event.inputs.run_id || github.run_id }}
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          repository: ${{ github.repository }}
+
+      # ----------------------------------------------------------------
+      # 3. Extract version
+      #    Qt6: hardcoded "0.200.1" here — deliberately NOT parsed from the
+      #         binary/source, since Qt-version self-detection inside the
+      #         compiled code proved unreliable (see commit e1aa65f). The CI
+      #         matrix entry already knows for certain which flavor it is
+      #         packaging, so the version label is set explicitly at the
+      #         packaging level instead.
+      # ----------------------------------------------------------------
+      - name: Extract version
+        id: version
+        shell: pwsh
+        run: |
+          if ("${{ matrix.version_source }}" -eq "hardcoded") {
+            $ver = "0.200.1"
+          } else {
+            $src = Get-Content "sources\qetversion.cpp" -Raw -ErrorAction SilentlyContinue
+            if ($src -match 'return QVersionNumber\{([^}]+)\}') {
+              $ver = $Matches[1] -replace '\s','' -replace ',','.'
+            } else {
+              # Fallback: CMakeLists.txt
+              $cmake = Get-Content "CMakeLists.txt" -Raw
+              if ($cmake -match 'project\s*\([^)]*VERSION\s+([\d]+\.[\d]+\.[\d]+)') {
+                $ver = $Matches[1]
+              } else {
+                $ver = "0.0.0"
+              }
+            }
+          }
+
+          # Short SHA for the display version
+          $sha = git rev-parse --short HEAD 2>$null
+          if (-not $sha) { $sha = "unknown" }
+
+          # Cumulative revision number (same calculation as windows-build.yml)
+          $count = git rev-list HEAD --count 2>$null
+          $rev = [int]$count + 473
+
+          # MSI Version only compares Major.Minor.Build (the 4th field is
+          # ignored by Windows Installer for upgrade detection), so we
+          # inject rev into Build to force a real increase between
+          # nightlies and trigger MajorUpgrade's automatic uninstall.
+          $verParts = $ver -split '\.'
+          $verMsi = "$($verParts[0]).$($verParts[1]).$($rev % 65535)"
+
+          $flavorTag = "${{ matrix.label_suffix }}"
+          $verDisplay = "${ver}${flavorTag}-r${rev}-${sha}_x86_64-win64"
+
+          echo "VERSION_MSI=$verMsi"         >> $env:GITHUB_OUTPUT
+          echo "VERSION_DISPLAY=$verDisplay" >> $env:GITHUB_OUTPUT
+          Write-Host "Version MSI     : $verMsi"
+          Write-Host "Version display : $verDisplay"
+
+          # Qt platform argument: kept from the Qt5 era (QTBUG-83161
+          # font-rendering workaround, GDI backend). Qt6 uses DirectWrite by
+          # default and does not need it, so this always resolves empty now.
+          if ("${{ matrix.flavor }}" -eq "qt5") {
+            $qtArgs = "-platform windows:fontengine=freetype"
+          } else {
+            $qtArgs = ""
+          }
+          echo "QT_ARGS=$qtArgs" >> $env:GITHUB_OUTPUT
+          Write-Host "Qt platform args: '$qtArgs'"
+
+      # ----------------------------------------------------------------
+      # 4. Install WiX v7, accept EULA and install WixUI extension
+      # ----------------------------------------------------------------
+      - name: Install WiX v7
+        shell: pwsh
+        run: |
+          dotnet tool install --global wix --version 7.0.0
+          $toolsPath = [System.IO.Path]::Combine($env:USERPROFILE, '.dotnet', 'tools')
+          $env:PATH = "$toolsPath;$env:PATH"
+          echo $toolsPath >> $env:GITHUB_PATH
+          wix eula accept wix7
+          wix extension add WixToolset.UI.wixext/7.0.0
+          wix extension add WixToolset.Util.wixext/7.0.0
+          Write-Host "WiX v7 installed, EULA accepted, UI + Util extensions added."
+
+      # ----------------------------------------------------------------
+      # 5. Check that the WXS file exists in the repository
+      # ----------------------------------------------------------------
+      - name: Check WXS file
+        shell: pwsh
+        run: |
+          $wxs = "build-aux\windows\QElectroTech.wxs"
+          if (-not (Test-Path $wxs)) {
+            Write-Error "WXS file not found: $wxs"
+            exit 1
+          }
+          Write-Host "WXS found: $wxs"
+
+      # ----------------------------------------------------------------
+      # 6. Check the artifact structure and locate files/
+      # ----------------------------------------------------------------
+      - name: Check artifact structure
+        shell: pwsh
+        run: |
+          $exe = Get-ChildItem -Path "artifact\files" -Filter "qelectrotech.exe" -Recurse | Select-Object -First 1
+          if (-not $exe) {
+            $exe = Get-ChildItem -Path "artifact\files" -Filter "QElectroTech.exe" -Recurse | Select-Object -First 1
+          }
+          if (-not $exe) {
+            Write-Error "qelectrotech.exe not found in artifact"
+            exit 1
+          }
+          Write-Host "Executable: $($exe.FullName) ($([math]::Round($exe.Length/1MB,1)) MB)"
+          $binDir    = $exe.Directory.FullName
+          $filesDir  = Split-Path $binDir -Parent
+          echo "FILES_DIR=$filesDir" >> $env:GITHUB_ENV
+          Write-Host "FILES_DIR: $filesDir"
+
+      # ----------------------------------------------------------------
+      # 7. Convert LICENSE (GPL-2) to RTF for the WixUI licence screen
+      # ----------------------------------------------------------------
+      - name: Convert LICENSE to RTF
+        shell: pwsh
+        run: |
+          $licSrc = "LICENSE"
+          $licRtf = "$env:TEMP\License.rtf"
+          if (-not (Test-Path $licSrc)) {
+            Write-Error "LICENSE file not found in repository root"
+            exit 1
+          }
+          $lines = Get-Content $licSrc -Encoding UTF8
+          $rtf = New-Object System.Text.StringBuilder
+          [void]$rtf.AppendLine('{\rtf1\ansi\ansicpg1252\deff0')
+          [void]$rtf.AppendLine('{\fonttbl{\f0\fmodern\fprq1\fcharset0 Courier New;}}')
+          [void]$rtf.AppendLine('{\colortbl;\red0\green0\blue0;}')
+          [void]$rtf.AppendLine('\f0\fs18\cf1')
+          foreach ($line in $lines) {
+            $escaped = $line `
+              -replace '\\', '\\\\' `
+              -replace '\{', '\{' `
+              -replace '\}', '\}'
+            [void]$rtf.AppendLine("$escaped\par")
+          }
+          [void]$rtf.AppendLine('}')
+          [System.IO.File]::WriteAllText($licRtf, $rtf.ToString(), [System.Text.Encoding]::ASCII)
+          echo "LICENSE_RTF=$licRtf" >> $env:GITHUB_ENV
+          Write-Host "License.rtf generated: $licRtf"
+
+      # ----------------------------------------------------------------
+      # 8. Replace Lancer QET.bat with the MSI-specific version
+      # ----------------------------------------------------------------
+      - name: Replace Lancer QET.bat for MSI
+        shell: pwsh
+        run: |
+          $qtArgs  = "${{ steps.version.outputs.QT_ARGS }}"
+          $bat     = "$env:FILES_DIR\Lancer QET.bat"
+          $content = "@echo off`r`nstart `"`" `"%~dp0bin\qelectrotech.exe`" --common-elements-dir=`"%~dp0elements/`" --common-tbt-dir=`"%~dp0titleblocks/`" --lang-dir=`"%~dp0lang/`" $qtArgs`r`n"
+          [System.IO.File]::WriteAllText($bat, $content, [System.Text.Encoding]::ASCII)
+          Write-Host "Lancer QET.bat replaced for MSI installation (qtArgs: '$qtArgs')."
+
+      # ----------------------------------------------------------------
+      # 9. Build the MSI (unsigned at this stage — signing happens below)
+      #    Qt6 keeps its own ProductCode seed (distinct from the retired Qt5
+      #    MSI), so a machine that still has the old Qt5 MSI installed gets a
+      #    separate, coexisting install rather than an unexpected upgrade.
+      # ----------------------------------------------------------------
+      - name: Build MSI
+        shell: pwsh
+        run: |
+          $version    = "${{ steps.version.outputs.VERSION_MSI }}"
+          $verDisplay = "${{ steps.version.outputs.VERSION_DISPLAY }}"
+          $filesDir   = $env:FILES_DIR
+          $licRtf     = $env:LICENSE_RTF
+          $wxs        = "build-aux\windows\QElectroTech.wxs"
+          $outputName = "QElectroTech-${verDisplay}.msi"
+
+          $seed      = "qelectrotech-msi-${{ matrix.flavor }}-$version"
+          $sha1      = [System.Security.Cryptography.SHA1]::Create()
+          $hash      = $sha1.ComputeHash([System.Text.Encoding]::UTF8.GetBytes($seed))
+          $hash[6]   = ($hash[6] -band 0x0F) -bor 0x50
+          $hash[8]   = ($hash[8] -band 0x3F) -bor 0x80
+          $productCode = "{$([System.Guid]::new([byte[]]$hash[0..15]).ToString().ToUpper())}"
+
+          New-Item -ItemType Directory -Force -Path "dist" | Out-Null
+
+          Write-Host "=== wix build (${{ matrix.flavor }}) ==="
+          Write-Host " Version     : $version"
+          Write-Host " ProductCode : $productCode"
+          Write-Host " Output      : dist\$outputName"
+
+          $qtArgs = "${{ steps.version.outputs.QT_ARGS }}"
+
+          wix build $wxs `
+            -arch x64 `
+            -d "Version=$version" `
+            -d "ProductVersion=$verDisplay" `
+            -d "ProductCode=$productCode" `
+            -d "FilesDir=$filesDir" `
+            -d "LicenseRtf=$licRtf" `
+            -d QtPlatformArgs="$qtArgs" `
+            -ext WixToolset.UI.wixext `
+            -ext WixToolset.Util.wixext `
+            -o "dist\$outputName"
+
+          if (-not (Test-Path "dist\$outputName")) {
+            Write-Error "MSI not generated: dist\$outputName"
+            exit 1
+          }
+
+          $size = [math]::Round((Get-Item "dist\$outputName").Length / 1MB, 1)
+          Write-Host "MSI generated: dist\$outputName ($size MB) OK"
+          echo "MSI_NAME=$outputName" >> $env:GITHUB_ENV
+
+      - name: Upload unsigned MSI artifact (pre-signing)
+        id: upload_unsigned
+        uses: actions/upload-artifact@v7
+        with:
+          name: qelectrotech-windows-msi-unsigned-${{ matrix.flavor }}
+          path: dist\*.msi
+          retention-days: 1
+          if-no-files-found: error
+
+      # Qt6 is now signed too (previously excluded while Qt5 was the stable
+      # track and Qt6 was experimental-only). The remaining guard is the fork
+      # check: forks never have the SignPath secrets, and a fork-originated
+      # PR/run must never attempt a signing request.
+      # (cf. DieterMayerOSS:fix/msi-signing-fork-guard, d3f60c88)
+      # continue-on-error: SignPath's certificate is still pending validation
+      # (Sept 2026) — the signing request currently fails with a 500 on the
+      # SignPath side. Kept non-blocking so the nightly MSI still ships
+      # (unsigned) while the certificate is pending. Remove
+      # continue-on-error once the certificate is confirmed active.
+      - name: Sign MSI via SignPath
+        id: sign
+        if: github.repository == 'qelectrotech/qelectrotech-source-mirror' && env.SIGNPATH_API_TOKEN != ''
+        continue-on-error: true
+        uses: signpath/github-action-submit-signing-request@v2
+        with:
+          api-token: ${{ secrets.SIGNPATH_API_TOKEN }}
+          organization-id: ${{ secrets.SIGNPATH_ORGANIZATION_ID }}
+          project-slug: 'qelectrotech-source-mirror'
+          signing-policy-slug: 'test-signing'
+          artifact-configuration-slug: 'MSI'
+          github-artifact-id: ${{ steps.upload_unsigned.outputs.artifact-id }}
+          wait-for-completion: true
+          output-artifact-directory: 'dist\'
+
+      # If signing succeeded, SignPath already overwrote dist\*.msi with the
+      # signed copy (output-artifact-directory above) — nothing to do here.
+      # If it failed/was skipped, dist\*.msi is still the unsigned MSI from
+      # the "Build MSI" step, so the rest of the pipeline just ships that.
+      - name: Report signing status
+        if: always()
+        shell: pwsh
+        run: |
+          if ("${{ steps.sign.outcome }}" -eq "success") {
+            Write-Host "MSI signed successfully via SignPath."
+          } else {
+            Write-Warning "MSI signing skipped or failed (outcome: ${{ steps.sign.outcome }}) — shipping UNSIGNED MSI. Likely cause: SignPath certificate still pending validation."
+          }
+
+      - name: Upload signed MSI artifact
+        if: always()
+        uses: actions/upload-artifact@v7
+        with:
+          name: qelectrotech-windows-msi-${{ matrix.flavor }}
+          path: dist\*.msi
+          retention-days: 40
+          if-no-files-found: error
+
+      - name: Delete old nightly .msi asset
+        if: always()
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          REPO: ${{ github.repository }}
+        run: |
+          $pattern = "-qt6.*\\.msi$"
+          $names = gh release view nightly --repo $env:REPO --json assets --jq ".assets[] | select(.name | test(`"$pattern`")) | .name"
+          foreach ($name in ($names -split "`n" | Where-Object { $_ })) {
+            Write-Host "Deleting old asset: $name"
+            gh release delete-asset nightly $name --repo $env:REPO --yes
+          }
+        shell: pwsh
+
+      - name: Upload MSI to nightly release
+        if: always()
+        uses: softprops/action-gh-release@v3
+        with:
+          tag_name: nightly
+          files: dist/*.msi
+          fail_on_unmatched_files: true
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Export MSI name for page generation
+        id: export
+        shell: pwsh
+        run: |
+          $name = "$env:MSI_NAME"
+          echo "msi_name_qt6=$name" >> $env:GITHUB_OUTPUT
+
+      - name: Summary
+        if: always()
+        shell: pwsh
+        run: |
+          Write-Host "=== MSI build summary (${{ matrix.flavor }}) ==="
+          Write-Host "Version : ${{ steps.version.outputs.VERSION_DISPLAY }}"
+          Write-Host "Signed  : ${{ steps.sign.outcome == 'success' }}"
+
+  # ---------------------------------------------------------------------------
+  # Job 2 : Génère et déploie la page GitHub Pages une fois le MSI publié,
+  # pour que toutes les URLs soient connues.
+  # ---------------------------------------------------------------------------
+  deploy-pages:
+    needs: build-msi
+    runs-on: ubuntu-latest
+    if: always() && needs.build-msi.result == 'success'
+    permissions:
+      contents: write
+      pages: write
+      id-token: write
+
+    steps:
+      - name: Checkout master (for generate-page.py)
+        uses: actions/checkout@v7
+        with:
+          ref: master
+          path: source
+          sparse-checkout: build-aux/generate-page.py
+          sparse-checkout-cone-mode: false
+
+      - name: Generate download page (index.html)
+        shell: bash
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        run: |
+          set -euo pipefail
+          REPO="${{ github.repository }}"
+
+          ASSETS=$(gh release view nightly --repo "$REPO" --json assets --jq '.assets[].name')
+
+          EXE_NAME=$(echo "$ASSETS" | grep 'qt6' | grep '\.exe$' | head -1)
+          ZIP_NAME=$(echo "$ASSETS" | grep 'qt6' | grep '\.zip$' | head -1)
+          MSI_NAME=$(echo "$ASSETS" | grep 'qt6' | grep '\.msi$' | head -1 || echo "")
+
+          # Legacy Qt5 assets (no "qt6" in the name): last ever published,
+          # frozen — windows-build.yml/windows-msi.yml no longer delete or
+          # replace these, so they keep pointing at the same files release
+          # after release. Rendered as a separate "legacy" section if present.
+          LEGACY_EXE_NAME=$(echo "$ASSETS" | grep -v 'qt6' | grep '\.exe$' | head -1 || echo "")
+          LEGACY_ZIP_NAME=$(echo "$ASSETS" | grep -v 'qt6' | grep '\.zip$' | head -1 || echo "")
+          LEGACY_MSI_NAME=$(echo "$ASSETS" | grep -v 'qt6' | grep '\.msi$' | head -1 || echo "")
+
+          BASE="https://github.com/$REPO/releases/download/nightly"
+          INSTALLER_URL="$BASE/$EXE_NAME"
+          PORTABLE_URL="$BASE/$ZIP_NAME"
+          MSI_URL=""
+          [ -n "$MSI_NAME" ] && MSI_URL="$BASE/$MSI_NAME"
+
+          LEGACY_INSTALLER_URL=""
+          LEGACY_PORTABLE_URL=""
+          LEGACY_MSI_URL=""
+          [ -n "$LEGACY_EXE_NAME" ] && LEGACY_INSTALLER_URL="$BASE/$LEGACY_EXE_NAME"
+          [ -n "$LEGACY_ZIP_NAME" ] && LEGACY_PORTABLE_URL="$BASE/$LEGACY_ZIP_NAME"
+          [ -n "$LEGACY_MSI_NAME" ] && LEGACY_MSI_URL="$BASE/$LEGACY_MSI_NAME"
+
+          SHA="${{ github.event.workflow_run.head_sha || github.sha }}"
+          SHORT="${SHA:0:7}"
+          DATE=$(date -u '+%Y-%m-%d %H:%M UTC')
+          RUN_URL="https://github.com/$REPO/actions/runs/${{ github.run_id }}"
+          RUN_NUMBER="${{ github.run_number }}"
+
+          export DATE SHORT REPO SHA RUN_URL RUN_NUMBER
+          export INSTALLER_URL PORTABLE_URL MSI_URL
+          export LEGACY_INSTALLER_URL LEGACY_PORTABLE_URL LEGACY_MSI_URL
+
+          python3 source/build-aux/generate-page.py
+
+      - name: Add .nojekyll
+        shell: bash
+        run: touch gh-pages/.nojekyll
+
+      - name: Upload GitHub Pages artifact
+        uses: actions/upload-pages-artifact@v5
+        with:
+          path: gh-pages/
+
+      - name: Deploy to GitHub Pages
+        uses: actions/deploy-pages@v4

.gitignore

@@ -6,4 +6,5 @@
 doc/*
 !doc/QElectroTech.qch
 QElectroTech.tag
-!doc/doc-utils
+!doc/doc-utils
+lang/*.qm

CMakeLists.txt

@@ -16,140 +16,342 @@
 
 include(cmake/hoto_update_cmake_message.cmake)
 
-cmake_minimum_required(VERSION 3.14...3.19 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.5...4.2)
 
 project(qelectrotech
-  VERSION 0.9.0
-  DESCRIPTION "QET is a CAD/CAE editor focusing on schematics drawing features."
-  HOMEPAGE_URL "https://qelectrotech.org/"
-  LANGUAGES CXX)
+        VERSION 0.200.1
+        DESCRIPTION "QET is a CAD/CAE editor focusing on schematics drawing features."
+        HOMEPAGE_URL "https://qelectrotech.org/"
+        LANGUAGES C CXX)
 
 include(cmake/copyright_message.cmake)
 
 set(QET_DIR ${PROJECT_SOURCE_DIR})
 
-# Add sub directories
-option(PACKAGE_TESTS "Build the tests" ON)
-if(PACKAGE_TESTS)
-  message("Add sub directory tests")
-  add_subdirectory(tests)
-endif()
 
 include(cmake/paths_compilation_installation.cmake)
 include(cmake/start_options.cmake)
 include(cmake/developer_options.cmake)
 include(cmake/git_update_submodules.cmake)
 include(cmake/git_last_commit_sha.cmake)
-include(cmake/fetch_kdeaddons.cmake)
 include(cmake/fetch_singleapplication.cmake)
 include(cmake/fetch_pugixml.cmake)
 include(cmake/qet_compilation_vars.cmake)
 
 set(CMAKE_INCLUDE_CURRENT_DIR ON)
-
 set(CMAKE_AUTOMOC ON)
 set(CMAKE_AUTORCC ON)
 set(CMAKE_AUTOUIC ON)
-
 SET(CMAKE_CXX_STANDARD 17)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 
 find_package(
-  QT
- NAMES
-  Qt5
- COMPONENTS
-  ${QET_COMPONENTS}
- REQUIRED
- )
+    Qt6
+    COMPONENTS
+    ${QET_COMPONENTS}
+    REQUIRED)
+
+# <private/qpdf_p.h> (QPdfEngine::drawHyperlink) needs Qt's private GUI module.
+# Qt >= 6.7 ships it as a proper find_package component, but some distro
+# packages (e.g. Ubuntu's qt6-base-private-dev) omit Qt6GuiPrivateConfig.cmake
+# and only provide the implicit Qt6::GuiPrivate target created alongside
+# Qt6::Gui. Try the component quietly, then verify the target below so a
+# missing private-headers package fails here instead of at compile time.
+find_package(Qt6 QUIET COMPONENTS GuiPrivate)
+
+if(NOT TARGET Qt6::GuiPrivate)
+    message(FATAL_ERROR
+        "Qt6::GuiPrivate was not found. It is required for PDF hyperlink "
+        "support (<private/qpdf_p.h>). Install the Qt6 private headers "
+        "(e.g. 'qt6-base-private-dev' on Debian/Ubuntu) or use a Qt build "
+        "that provides the GuiPrivate component.")
+endif()
+
+# PDF page import (toolbar "Ajouter un PDF") needs the QtPdf module and,
+# specifically, QPdfDocument::pagePointSize() which only exists since Qt 6.4.
+# Unlike GuiPrivate above, a missing QtPdf module is NOT fatal here: some
+# Qt6 distributions (e.g. the Flatpak org.kde.Platform runtime) don't ship
+# it at all, since it lives in the qtwebengine source tree rather than Qt6
+# core. When it's missing, or too old, the feature is silently disabled -
+# see the QT_VERSION_CHECK / QET_HAS_QTPDF guards in diagrameventaddpdf.*
+# and pdfpagesdialog.*.
+set(QET_HAS_QTPDF FALSE)
+find_package(Qt6 QUIET COMPONENTS Pdf)
+if(TARGET Qt6::Pdf AND NOT Qt6_VERSION VERSION_LESS 6.4.0)
+    set(QET_HAS_QTPDF TRUE)
+    list(APPEND QET_PRIVATE_LIBRARIES Qt::Pdf)
+    add_compile_definitions(QET_HAS_QTPDF)
+else()
+    message(STATUS "QtPdf module not available (or Qt < 6.4): PDF page import feature disabled")
+endif()
+
+# JavaScript scripting (bugtracker #162: `--run script.js`, and later a
+# "Run Script..." menu action) needs QJSEngine, in the Qml module. As with
+# QtPdf above, this is not fatal when missing: some minimal Qt6 packagings
+# may not ship it, and scripting is optional functionality nothing else in
+# the application depends on. When it's missing the feature is silently
+# disabled - see the QET_HAS_SCRIPTING guard in qetscripting.*.
+set(QET_HAS_SCRIPTING FALSE)
+find_package(Qt${QT_VERSION_MAJOR} QUIET COMPONENTS Qml)
+if(TARGET Qt${QT_VERSION_MAJOR}::Qml)
+    set(QET_HAS_SCRIPTING TRUE)
+    list(APPEND QET_PRIVATE_LIBRARIES Qt::Qml)
+    add_compile_definitions(QET_HAS_SCRIPTING)
+else()
+    message(STATUS "Qt Qml module not available: JavaScript scripting (--run) disabled")
+endif()
+
+# The crash handler writes a backtrace into the dump. Detecting this with
+# __has_include(<execinfo.h>) is not enough: the header is present on FreeBSD
+# too, but backtrace() lives in a separate libexecinfo there, so the compile
+# succeeds and the link fails. FindBacktrace resolves both the header and
+# whichever library actually provides the symbol, so gate on it instead - see
+# the QET_CRASH_BACKTRACE guard in sources/logging/crashhandler.cpp.
+find_package(Backtrace QUIET)
+if(Backtrace_FOUND)
+    list(APPEND QET_PRIVATE_LIBRARIES ${Backtrace_LIBRARIES})
+    include_directories(${Backtrace_INCLUDE_DIRS})
+    add_compile_definitions(QET_CRASH_BACKTRACE)
+else()
+    message(STATUS "backtrace() not available: crash dumps will carry the log ring without a backtrace")
+endif()
 
-find_package(
-  Qt${QT_VERSION_MAJOR}
- COMPONENTS
- ${QET_COMPONENTS}
- REQUIRED)
 find_package(SQLite3 REQUIRED)
 
+# CMake < 4.3 only creates the SQLite::SQLite3 target (no SQLite3::SQLite3
+# alias yet), while CMake >= 4.3's bundled FindSQLite3 creates SQLite3::SQLite3
+# and deprecates the old name. Add the missing alias ourselves so we can use
+# the modern target name everywhere regardless of the CMake version in use
+# (this project must keep building on CMake versions below 4.3, e.g. on most
+# current Linux distros).
+if(NOT TARGET SQLite3::SQLite3 AND TARGET SQLite::SQLite3)
+    add_library(SQLite3::SQLite3 ALIAS SQLite::SQLite3)
+endif()
+
 set(CMAKE_AUTOUIC_SEARCH_PATHS ${QET_DIR}/sources/ui)
-qt5_create_translation(QM_FILES ${CMAKE_SOURCE_DIR} ${TS_FILES})
-set_source_files_properties(${TS_FILES} PROPERTIES OUTPUT_LOCATION "${QET_DIR}/lang")
-qt5_add_translation(QM_FILES ${TS_FILES})
+
+include(cmake/fetch_kdeaddons.cmake)
+
+# Add sub directories
+option(PACKAGE_TESTS "Build the tests" ON)
+if(PACKAGE_TESTS)
+    message("Add sub directory tests")
+    enable_testing()
+    add_subdirectory(tests)
+endif()
 
 # als laatse
 include(cmake/define_definitions.cmake)
 
-add_executable(
-  ${PROJECT_NAME}
-  ${QET_RES_FILES}
-  ${QET_SRC_FILES}
-  ${QM_FILES}
-  ${QET_DIR}/qelectrotech.qrc
-  )
+# On Windows, WIN32 sets /SUBSYSTEM:WINDOWS to suppress the console window.
+# Qt automatically links qtmain.lib which provides the WinMain entry point,
+# so no source code change is needed.
+if(WIN32)
+    add_executable(
+        ${PROJECT_NAME}
+        WIN32
+        ${QET_RES_FILES}
+        ${QET_SRC_FILES}
+        ${QM_FILES}
+        ${QET_DIR}/qelectrotech.qrc
+        ${QET_DIR}/ico/icon-themes.qrc
+    )
+else()
+    add_executable(
+        ${PROJECT_NAME}
+        ${QET_RES_FILES}
+        ${QET_SRC_FILES}
+        ${QM_FILES}
+        ${QET_DIR}/qelectrotech.qrc
+        ${QET_DIR}/ico/icon-themes.qrc
+    )
+endif()
+
+if(APPLE)
+    # CFBundleIdentifier must not be empty. CMake's default Info.plist
+    # template fills it from MACOSX_BUNDLE_GUI_IDENTIFIER; with that unset
+    # the bundle ships an empty identifier, LaunchServices never registers
+    # the .app, and AppKit's open/save panel service (which is keyed on the
+    # client's bundle id) silently presents nothing -- every
+    # QFileDialog::getOpenFileName()/getSaveFileName() call returns an empty
+    # string without a panel ever appearing, so File > Open and File > Save
+    # as do nothing at all.
+    set_target_properties(${PROJECT_NAME} PROPERTIES
+        MACOSX_BUNDLE TRUE
+        MACOSX_BUNDLE_GUI_IDENTIFIER "org.qelectrotech.QElectroTech"
+        MACOSX_BUNDLE_BUNDLE_NAME "QElectroTech"
+        MACOSX_BUNDLE_BUNDLE_VERSION "${PROJECT_VERSION}"
+        MACOSX_BUNDLE_SHORT_VERSION_STRING "${PROJECT_VERSION}"
+        MACOSX_BUNDLE_COPYRIGHT "Copyright 2006-2026 The QElectroTech Team"
+    )
+endif()
+
+# The default build only compiles the tracked .ts files to .qm (lrelease).
+# Refreshing the .ts from the sources (lupdate) is a developer action behind
+# the explicit "update_translations" target below: running lupdate on every
+# build rewrote tracked files as a side effect, and under high parallelism
+# lupdate rewriting a .ts while lrelease read the same file made the build
+# fail with "Premature end of document".
+set_source_files_properties(
+    ${TS_FILES}
+    PROPERTIES OUTPUT_LOCATION "lang"
+)
+if(Qt6_VERSION VERSION_LESS "6.2")
+    # Qt 6.0–6.1
+    qt6_add_translation(QM_FILES ${TS_FILES})
+
+    # qt6_add_translation() only creates custom commands. Something must
+    # depend on their outputs for them to run during the default build.
+    add_custom_target(${PROJECT_NAME}_lrelease ALL
+        DEPENDS ${QM_FILES}
+    )
+
+    add_custom_target(update_translations
+        COMMAND
+            $<TARGET_FILE:Qt6::lupdate>
+            "${CMAKE_SOURCE_DIR}/sources"
+            -ts ${TS_FILES}
+        WORKING_DIRECTORY "${CMAKE_SOURCE_DIR}"
+        COMMENT
+            "Updating .ts files from sources/ (lupdate) - developer target"
+        VERBATIM
+    )
+
+elseif(Qt6_VERSION VERSION_LESS "6.7")
+    # Qt 6.2–6.6: old target-based signature
+    qt_add_lrelease(
+        ${PROJECT_NAME}
+        TS_FILES ${TS_FILES}
+        QM_FILES_OUTPUT_VARIABLE QM_FILES
+    )
+
+    # Automatically creates the update_translations umbrella target.
+    qt_add_lupdate(
+        ${PROJECT_NAME}
+        TS_FILES ${TS_FILES}
+    )
+
+else()
+    # Qt 6.7+: new signature
+    qt_add_lrelease(
+        TS_FILES ${TS_FILES}
+        LRELEASE_TARGET ${PROJECT_NAME}_lrelease
+        QM_FILES_OUTPUT_VARIABLE QM_FILES
+    )
+
+    qt_add_lupdate(
+        SOURCE_TARGETS ${PROJECT_NAME}
+        TS_FILES ${TS_FILES}
+        LUPDATE_TARGET update_translations
+        NO_GLOBAL_TARGET
+    )
+endif()
+
+
+# Optional precompiled headers -- see QET_ENABLE_PCH in
+# cmake/developer_options.cmake for what this trades away.
+#
+# target_precompile_headers() needs CMake 3.16; the project still declares a
+# 3.5 minimum, so guard rather than raise it for an opt-in developer feature.
+#
+# The generator expressions are load-bearing, not decoration: this target also
+# compiles the 18 C files of the bundled LZMA decoder
+# (sources/import/edz/lzma/*.c), and an unguarded list applies to every
+# language in the target, so the Qt headers would reach the C compiler and fail
+# with "unknown type name 'namespace'". $<ANGLE-R> is required because a
+# literal '>' would terminate the generator expression.
+if(QET_ENABLE_PCH)
+    if(CMAKE_VERSION VERSION_LESS 3.16)
+        message(WARNING
+            "QET_ENABLE_PCH needs CMake 3.16 or newer (found ${CMAKE_VERSION}); "
+            "building without precompiled headers.")
+    else()
+        target_precompile_headers(${PROJECT_NAME} PRIVATE
+            "$<$<COMPILE_LANGUAGE:CXX>:<QtCore/QtCore$<ANGLE-R>>"
+            "$<$<COMPILE_LANGUAGE:CXX>:<QtGui/QtGui$<ANGLE-R>>"
+            "$<$<COMPILE_LANGUAGE:CXX>:<QtWidgets/QtWidgets$<ANGLE-R>>"
+            "$<$<COMPILE_LANGUAGE:CXX>:<QtXml/QtXml$<ANGLE-R>>"
+        )
+        message(STATUS "QET_ENABLE_PCH: precompiled headers enabled")
+    endif()
+endif()
 
 target_link_libraries(
-  ${PROJECT_NAME}
-  PUBLIC
-  PRIVATE
-  pugixml::pugixml
-  SingleApplication::SingleApplication
-  SQLite::SQLite3
-  ${KF5_PRIVATE_LIBRARIES}
-  ${QET_PRIVATE_LIBRARIES}
-  )
+    ${PROJECT_NAME}
+    PUBLIC
+    PRIVATE
+    pugixml::pugixml
+    SingleApplication::SingleApplication
+    SQLite3::SQLite3
+    ${KF_PRIVATE_LIBRARIES}
+    ${QET_PRIVATE_LIBRARIES}
+)
 
 target_include_directories(
-  ${PROJECT_NAME}
-  PRIVATE
-  ${QET_DIR}/sources/titleblock
-  ${QET_DIR}/sources/ui
-  ${QET_DIR}/sources/qetgraphicsitem
-  ${QET_DIR}/sources/qetgraphicsitem/ViewItem
-  ${QET_DIR}/sources/qetgraphicsitem/ViewItem/ui
-  ${QET_DIR}/sources/richtext
-  ${QET_DIR}/sources/factory
-  ${QET_DIR}/sources/properties
-  ${QET_DIR}/sources/dvevent
-  ${QET_DIR}/sources/editor
-  ${QET_DIR}/sources/editor/esevent
-  ${QET_DIR}/sources/editor/graphicspart
-  ${QET_DIR}/sources/editor/ui
-  ${QET_DIR}/sources/editor/UndoCommand
-  ${QET_DIR}/sources/undocommand
-  ${QET_DIR}/sources/diagramevent
-  ${QET_DIR}/sources/ElementsCollection
-  ${QET_DIR}/sources/ElementsCollection/ui
-  ${QET_DIR}/sources/autoNum
-  ${QET_DIR}/sources/autoNum/ui
-  ${QET_DIR}/sources/ui/configpage
-  ${QET_DIR}/sources/SearchAndReplace
-  ${QET_DIR}/sources/SearchAndReplace/ui
-  ${QET_DIR}/sources/NameList
-  ${QET_DIR}/sources/NameList/ui
-  ${QET_DIR}/sources/utils
-  ${QET_DIR}/pugixml/src
-  ${QET_DIR}/sources/dataBase
-  ${QET_DIR}/sources/dataBase/ui
-  ${QET_DIR}/sources/factory/ui
-  ${QET_DIR}/sources/print
-  )
-
-install(TARGETS ${PROJECT_NAME})
-if (NOT MINGW)
-
-install(DIRECTORY ico/breeze-icons/16x16 DESTINATION ${QET_ICONS_PATH})
-install(DIRECTORY ico/breeze-icons/22x22 DESTINATION ${QET_ICONS_PATH})
-install(DIRECTORY ico/breeze-icons/32x32 DESTINATION ${QET_ICONS_PATH})
-install(DIRECTORY ico/breeze-icons/48x48 DESTINATION ${QET_ICONS_PATH})
-install(DIRECTORY ico/breeze-icons/64x64 DESTINATION ${QET_ICONS_PATH})
-install(DIRECTORY ico/breeze-icons/128x128 DESTINATION ${QET_ICONS_PATH})
-install(DIRECTORY ico/breeze-icons/256x256 DESTINATION ${QET_ICONS_PATH})
-install(DIRECTORY elements DESTINATION share/qelectrotech)
-install(DIRECTORY examples DESTINATION share/qelectrotech)
-install(DIRECTORY titleblocks DESTINATION share/qelectrotech)
-install(FILES LICENSE ELEMENTS.LICENSE CREDIT README ChangeLog DESTINATION share/doc/qelectrotech)
-install(FILES misc/org.qelectrotech.qelectrotech.desktop DESTINATION share/applications)
-install(FILES misc/qelectrotech.xml DESTINATION share/mime/packages)
-install(FILES misc/qelectrotech.appdata.xml DESTINATION ${QET_APPDATA_PATH})
-install(FILES ${QM_FILES} DESTINATION ${QET_LANG_PATH})
+    ${PROJECT_NAME}
+    PRIVATE
+    ${QET_DIR}/sources/titleblock
+    ${QET_DIR}/sources/ui
+    ${QET_DIR}/sources/qetgraphicsitem
+    ${QET_DIR}/sources/qetgraphicsitem/ViewItem
+    ${QET_DIR}/sources/qetgraphicsitem/ViewItem/ui
+    ${QET_DIR}/sources/richtext
+    ${QET_DIR}/sources/factory
+    ${QET_DIR}/sources/properties
+    ${QET_DIR}/sources/dvevent
+    ${QET_DIR}/sources/editor
+    ${QET_DIR}/sources/editor/esevent
+    ${QET_DIR}/sources/editor/graphicspart
+    ${QET_DIR}/sources/editor/ui
+    ${QET_DIR}/sources/editor/UndoCommand
+    ${QET_DIR}/sources/undocommand
+    ${QET_DIR}/sources/diagramevent
+    ${QET_DIR}/sources/ElementsCollection
+    ${QET_DIR}/sources/ElementsCollection/ui
+    ${QET_DIR}/sources/autoNum
+    ${QET_DIR}/sources/autoNum/ui
+    ${QET_DIR}/sources/ui/configpage
+    ${QET_DIR}/sources/SearchAndReplace
+    ${QET_DIR}/sources/SearchAndReplace/ui
+    ${QET_DIR}/sources/NameList
+    ${QET_DIR}/sources/NameList/ui
+    ${QET_DIR}/sources/utils
+    ${QET_DIR}/pugixml/src
+    ${QET_DIR}/sources/dataBase
+    ${QET_DIR}/sources/dataBase/ui
+    ${QET_DIR}/sources/factory/ui
+    ${QET_DIR}/sources/print
+    ${QET_DIR}/sources/svg
+)
 
+if(NOT BUILD_WITH_KF)
+    target_include_directories(
+        ${PROJECT_NAME}
+        PRIVATE
+        ${QET_DIR}/sources/ui/nokde
+    )
+endif()
+
+install(TARGETS ${PROJECT_NAME}
+    BUNDLE DESTINATION .
+)
+
+if (NOT MINGW)
+    install(DIRECTORY ico/breeze-icons/16x16   DESTINATION ${QET_ICONS_PATH})
+    install(DIRECTORY ico/breeze-icons/22x22   DESTINATION ${QET_ICONS_PATH})
+    install(DIRECTORY ico/breeze-icons/32x32   DESTINATION ${QET_ICONS_PATH})
+    install(DIRECTORY ico/breeze-icons/48x48   DESTINATION ${QET_ICONS_PATH})
+    install(DIRECTORY ico/breeze-icons/64x64   DESTINATION ${QET_ICONS_PATH})
+    install(DIRECTORY ico/breeze-icons/128x128 DESTINATION ${QET_ICONS_PATH})
+    install(DIRECTORY ico/breeze-icons/256x256 DESTINATION ${QET_ICONS_PATH})
+    install(DIRECTORY elements    DESTINATION share/qelectrotech)
+    install(DIRECTORY examples    DESTINATION share/qelectrotech)
+    install(DIRECTORY titleblocks DESTINATION share/qelectrotech)
+    install(FILES LICENSE ELEMENTS.LICENSE CREDIT README ChangeLog DESTINATION share/doc/qelectrotech)
+    if(UNIX AND NOT APPLE)
+        install(FILES misc/org.qelectrotech.qelectrotech.desktop DESTINATION share/applications)
+        install(FILES misc/qelectrotech.xml    DESTINATION ${QET_MIME_PACKAGE_PATH})
+        install(FILES misc/qelectrotech.appdata.xml DESTINATION ${QET_APPDATA_PATH})
+    endif()
+    install(FILES ${QM_FILES} DESTINATION ${QET_LANG_PATH})
 endif()

ChangeLog

@@ -1,5 +1,810 @@
 # QElectroTech - CHANGELOG
 
+## Version 0.101 (Unreleased)
+
+_Compiled from commit history since 0.100._
+
+## Overview
+
+Since 0.100, development has centered on a new headless command-line workflow, terminal-strip and cross-reference improvements, a wave of crash and stability fixes, and continued packaging/CI modernization (Windows MSI, macOS, Snap). Translation coverage was extended again, notably with new Korean support.
+
+## Highlights / Key Features
+
+- **Headless CLI export**
+- New command-line export mode for PDF, PNG and SVG, letting QET projects be rendered without opening the GUI.
+- Added `--export-bom`, `--export-nets`, `--export-links`, `--check-elements`, `--info`, `--set-titleblock` and `--resave` CLI options for scripted/batch workflows.
+- The editor grid is now disabled in CLI-rendered output, and async crash-recovery backups are disabled in headless mode to avoid a segfault.
+- **PDF export improvements**
+- Cross-references are now clickable hyperlinks in exported PDFs, jumping directly to the linked element or terminal.
+- Wiring list and wire-number list can now be exported to CSV, both from the GUI and the CLI.
+- **Diagram duplication**
+- Diagrams/folios can now be duplicated along with all their metadata and embedded elements.
+- **BOM / Nomenclature**
+- Specific elements can now be excluded from the Bill of Materials (Nomenclature).
+- **Terminal & cross-reference (Xref) work**
+- Continued iteration on a `max_slaves` limit for Master elements (added, tuned, briefly reverted, then re-implemented with proper save/load handling).
+- New "potential isolation" option for terminals, and new No/Nc/Common contact types for switch (SW) terminals.
+- Cross-reference items gained an option to hide terminal names, fixed terminal-name sorting for power contacts, and fixed a couple of SIGSEGV crashes (including one when dropping a power NC contact on the diagram).
+- **Windows installer**
+- MSI nightlies now inject the Git revision count into the MSI version's Build field, fixing the long-standing regression where `MajorUpgrade` never triggered because the version string never changed — nightlies had to be uninstalled by hand before.
+- The old `Lancer QET.bat` wrapper was removed in favor of handling launch natively in `QElectroTech.wxs`.
+- NSIS installer updated to the 3.x line, with a bundled Fonts directory and corrected language tables.
+
+## Detailed Changes
+
+### Editor & UX
+
+- Element panel and context-menu/link-button logic refactored for clarity; `MasterElement::isFull` and related conditional checks simplified.
+- Font-size spin boxes in the text editor now enforce a 4pt minimum, fixing a SIGSEGV that occurred when the value reached 0.
+- Text position (`PartText`) now stays stable across save/reopen when the font changes.
+- Element editor: no more spurious warning on save for front-view elements without terminals; "Save As" field is now correctly labelled as a file name rather than an element name.
+
+### Bug Fixes
+
+- Fixed a Unicode-path bug in pugixml on Windows: collection or element paths containing accented characters (é, ü, ñ, …) silently failed to load because the narrow-char API was used instead of the wide-char one.
+- Fixed center-alignment not being restored when reloading a saved table configuration (config serialised `AlignHCenter`, but the loader compared against `AlignCenter`).
+- Fixed a `TerminalData` memory leak in the `Terminal` destructor (confirmed via ASan across several call sites).
+- Fixed several uninitialised-value bugs found with Valgrind, and a couple of thread-unsafe `QStandardPaths` calls in the data/config directory lookup.
+- Fixed a crash when destroying a `QETProject` before its asynchronous backup had finished.
+- Fixed regional system locale sometimes loading the wrong translation.
+- Fixed dynamic element text shifting/jumping when duplicating diagrams, and a wiring-list filter/timing issue.
+- Various smaller fixes: a first-click spurious element move right after selecting a tool, an -Wreorder compiler warning, and several translation corrections (German, French, Chinese).
+
+### macOS
+
+- Fixed the long-standing bug (open since 2022) where double-clicking a `.qet`, `.elmt` or `.titleblock` file launched the app without opening the file — the file-open event is now buffered during a cold launch, before `QETApp` exists, and routed correctly once the app is already running.
+- Continued work on the black-screen-after-PDF-export regression on Apple Silicon, tied to the Metal compositor's async timing.
+
+### Build, Packaging & CI
+
+- Windows nightly build pipeline continued its migration to GitHub Actions; test builds for the VS2026 toolchain were run against the same pipeline.
+- Snap package now stages `libxcb-cursor0`, fixing an xcb plugin load failure on Ubuntu 24.04.
+- CMake install rules for Linux-only targets are now correctly guarded against macOS.
+- `qet-tb-generator` in the Snap build is now pinned to a fixed upstream tag instead of floating.
+
+### Internationalization & Translations
+
+- Expanded Korean (ko) support: UI strings, comments, generic names, installer language strings, translator credits and a new Korean man page.
+- Additional updates to German, French, Chinese (zh), and other translation files, including strings related to the new duplicate-diagram and macro features.
+
+## Developer & Contributor Notes
+
+- Terminal strip and element data model continued to evolve incrementally (multiple passes on `max_slaves` handling, access modifiers, and storage), reflecting ongoing refinement of the terminal editor introduced in 0.100.
+- PDF link handling was factored out into a shared `pdf_links.{cpp,h}` helper, reused by both the interactive export and the new CLI export path.
+
+## Upgrade / Migration Notes
+
+- No project file format changes are expected to break compatibility with 0.100 projects.
+- Users relying on Windows nightlies should note that upgrades will now uninstall the previous nightly automatically, instead of requiring a manual uninstall first.
+
+## How to get help / report bugs
+
+- Use the project issue tracker to report regressions or new bugs, with detailed reproduction steps and example `.qet` files where possible.
+- Include the output of Help → About (application version and Git revision) when reporting build/packaging issues.
+
+
+
+## Version 0.100
+
+_Compiled from provided commit logs and contributor notes._
+
+## Overview
+
+This release (v0.100) collects a large set of new features, UI and editor improvements, element and symbol updates, build and packaging fixes, dependency upgrades, translations, and a broad set of bug fixes and stability improvements. It is intended as a stable, feature-rich stepping stone toward the next major workflows for symbol editing, terminal/strip handling and export improvements.
+
+## Highlights / Key Features
+
+- **Terminal Strip / Terminal Strip Editor**
+- New TerminalStripItem type and related editor workflow added.
+- Support for drawing and displaying terminal bridges and links in the editor.
+- Full editor support (layout preview, save/load into .qet files) and undo support for terminal strip operations.
+- **New Example Projects**
+- Several new example projects included, notably photovoltaic (PV) examples to help users getting started with PV designs.
+- **Improved Export / Print Handling**
+- Export limits adjusted and better handling of QPainter/printing boundaries to avoid export artefacts and out-of-range errors.
+- Export dialog updated to allow larger pixel limits where appropriate.
+- **Element & Symbol Additions**
+- New elements and symbols added (including vendor-specific elements and additional sensors/Arduino components).
+- Improvements to element import & metadata handling.
+- **Packaging & Multi-arch Support**
+- Updated packaging scripts for AppImage, Flatpak, Snap and macOS deployment. Improved aarch64/arm64 support.
+
+## Detailed Changes
+
+### Editor & UX
+
+- Better handling for **rotation, flip and mirror** operations in the element editor:
+- Primitives and text rotation behavior improved.
+- Finer rotation increments and predictable text orientation after flips/rotations.
+- **Wiring and conductor behavior**:
+- More robust creation and movement of wires and conductor bundles.
+- Improved text attachment and positioning for wires and improved stability while editing complex conductor networks.
+- **TerminalStrip editor**: see Highlights - includes drawing, preview, layout editing, persistent storage in the project file and undo support.
+- **Element Editor & Symbol Trim/Sort**:
+- Improved trimming/normalization of element metadata.
+- Better sorting and error handling for element imports (DXF and other formats).
+- Small UI improvements: About dialog updates, autosave spinbox ranges, improved tooltips and mouse-hover help for dynamic texts.
+
+### New & Updated Elements
+
+- New elements added for industrial and automation workflows (including Siemens-related elements, logic elements, sensors and Arduino components).
+- Symbol library additions and cleanup; improved defaults for newly added symbols.
+- Element meta-data cleanup: article numbers, descriptions, and manufacturer fields were normalized and trimmed on import.
+
+### Export / Printing / PDF
+
+- Adjusted internal export limits to avoid hitting QPainter size restrictions; users can now export larger, high-resolution images/prints in more cases.
+- Better handling of page sizes and printer-related geometry using QRectF improvements.
+- PDF export improvements to increase reliability of exported vector content.
+
+### Build, Dependencies, Packaging
+
+- Upgrades of core test and build dependencies:
+- Catch2 upgraded to v2.13.10.
+- googletest upgraded to v1.17.0.
+- CMake fixes and i18n handling corrected for nl_BE and other locales.
+- Packaging scripts updated across platforms (AppImage/Flatpak/Snap/macOS deploy) including fixes for aarch64/arm64.
+- Submodule updates (e.g., qelectrotech-elements, pugixml, SingleApplication) synchronized where needed.
+
+### Internationalization & Translations
+
+- Large translation updates across many languages: German (DE), French (FR), Dutch (NL, including nl_BE), Swedish (SV), Italian (IT), Polish (PL), Portuguese-BR (PT-BR), Serbian (SR), Chinese (Simplified) and others.
+- Fixes and corrections for many UI strings and localized resources.
+
+### Tests, QA & Logging
+
+- Improved logging and machine/config-path reporting; Git revision display refined to only show a revision when available.
+- Unit test updates and fixes to align with updated testing frameworks.
+
+## Bug Fixes (selected)
+
+- Fixed crashes and various null pointer access issues discovered by static and dynamic testing.
+- Resolved multiple reported bugs that caused build failures on some platforms (FTBFS fixes for macOS and others).
+- Fixed issues with automatic conductor/strand numbering in several edge cases (referenced Bug 293 in the commit logs).
+- Resolved text/summary headline issues in the German-language summary generator.
+- Fixes for a number of visually incorrect renderings and layout corner-cases during element transformation (rotate/flip/mirror).
+- Fixed issues that affected export sizes and caused export artifacts (referenced fixes for bug IDs around #329/#330 in commit notes).
+
+## Developer & Contributor Notes
+
+- Reworked parts of the codebase to use QRectF consistently for better compatibility with QPrinter and export pipelines.
+- Code-style cleanups and comment improvements applied throughout the project.
+- Expanded test coverage and dependency refresh to keep CI builds stable.
+
+## Contributors (selected)
+
+Thanks to the many contributors who made this release possible. Selected contributors mentioned in the commit logs include:
+
+- Laurent Trinques
+- joshua
+- plc-user
+- Achim
+- Pascal Sander
+- Andre Rummler
+- Magnus Hellströmer
+- Martin Marmsoler
+- Remi Collet
+
+(See the full commit history for the complete contributor list.)
+
+## Upgrade / Migration Notes
+
+- No database or project file format breaking changes were reported in the provided logs. As always, back up projects before opening them with a new version.
+- If you rely on custom element libraries or third-party submodules, verify submodule synchronization after upgrading.
+- If you are using custom packaging pipelines, review the updated packaging scripts for any changes required by new dependency versions, especially on aarch64/arm64.
+
+## Known Issues & Limitations
+
+- Some very large exports may still be limited by platform-specific rendering restrictions; the export dialog now allows larger pixel limits but extreme sizes may still hit system-level limits.
+- If you use niche element-import workflows (DXF → element import), occasionally metadata normalization may alter whitespace/trim rules - verify newly imported elements in the element editor.
+
+## How to get help / report bugs
+
+- Use the project issue tracker (see repository) to report regressions or new bugs with detailed reproduction steps and example .qet files where possible.
+- Include the output of Help → About (application version and Git revision) when reporting build/packaging issues.
+
+
+
+
+
+====== ChangeLog from 0.8 to 0.9 ======
+
+
+*Diagram editor :
+Improved QElectroTech speed (launch qet, open project, function)
+A drop-down list has been added to the toolbar to change the size of the resize handles.
+
+
+*Element Editor:
+The "keep visual rotation" property of element texts is editable from the element editor.
+Thanks to the work of antonioaja it is now possible to import a dxf directly from the element editor in a completely transparent way for the user.
+In the background QElectroTech uses the dxf2elmt software. https://qelectrotech.org/forum/viewtopic.php?id=2265 https://github.com/antonioaja/dxf2elmt
+Improved responsiveness when multiple shapes are selected or deleted, especially when working on a large converted DXF element.
+https://qelectrotech.org/forum/viewtopic.php?pid=16612#p16612
+
+*Other:
+Add a "side project" tab in the "about" window.
+In the general QElectroTech configuration, a drop down list allows to choose the scaling method for hdpi screens.
+Allow open polygons (i.e. polylines) when saving in dxf format.
+https://qelectrotech.org/forum/viewtopic.php?pid=16611#p16611
+
+Added 'Other' option for slave device contact type.
+https://github.com/qelectrotech/qelectrotech-source-mirror/pull/222
+https://qelectrotech.org/forum/viewtopic.php?id=2264
+
+*Logs:
+
+Added a QElapsedTimer to calculate the time used to reload the item collection.
+Improved QElapsedTimer to calculate the time used to reload the item collection in seconds instead of ms.
+Added Linux pc.gpu.RAM information, but requires mesa-utils dependency on the Linux OS.
+Added information about mounted disk volumes.
+Added CPU architecture for which Qt was compiled in the aboutqetdialog widget and in the logs.
+Added MSVC support to MachineInfo.
+Added RAM information on Windows of available RAM.
+Added QElectroTech version to the log file.
+
+
+
+* Elements collection :
+Improve collection 8274 elements in 1097 categories (i.e. 9371 files).
+
+
+
+* macOS :
+Fix sqlite3 database export on macOS, now I use macports with Digikam scripts instead off Homebrew Package Manager.
+See: https://invent.kde.org/graphics/digikam/-/tree/master/project/bundles/macports
+
+
+*Bug fix:
+see: https://git.tuxfamily.org/qet/qet.git/log/?h=0.8.1
+
+====== ChangeLog from 0.7 to 0.8 ======
+
+
+* Moving the main QET repository SVN trunk to GIT.
+* Add a mirror of the main QET repository, which is synced to hosted at tuxfamily.org to Github.
+* Doxyfile update add QCH file for doxygen-generated docs using qhelpgenerator and then import them into Qt Creator.
+* Improve portability of Doxyfile (Simon).
+* Fix deprecated warnings (Simon).
+* Wrap code for better readability (Simon, Damian).
+
+
+
+
+* Elements collection :
+Improve collection 7378 elements in 1092 categories
+Thanks Sebastien, Dinozzo, Simon,  Rafał, Arnaud, Bisku, Fernando, Riesermauf, Alexis, david, Plc-user, Christophe, Michele,  Galexis, Jevgenijs, Gabor,
+Benoit Michel, Franck, Ludovic, Cyrille, ossau2mation,  Mitzot,  Edgar, Nuri, Friskolon, Baboune41, Wiktor, shateks, Dik, Shateks,  Marcin
+
+
+* Diagram editor :
+
+* The export of the nomenclature to csv file has been completely rewritten :
+It is now possible to choose which information to export as well as the order in which it should be displayed.
+An option allows filtering by type of element: all, terminal block, button / switch.
+Another option allows to display or not the column headers in the csv file.
+With these options, it is possible to create a nomenclature, an order list, but also for printing labels: list of terminals and list of buttons / switches.
+It is possible to save / load a configuration easily.
+Finally, the work being done by an SQLite database, a text field allows the user to create his own SQL query.
+
+* Add Conductors numbering to csv file.
+
+* Add new summary table.
+
+* add BOM creation dialog :
+nomenclature is now integrated into the project (accompanied by several parameters in order to be customizable).
+Tables can have a name.
+Tables an be added to any folio.
+Font margin and alignment (right center left) separately adjustable for headers and table cells.
+Position size and number of lines is adjustable.
+Possibility of linking several tables together, especially when the entire nomenclature cannot be contained in a folio.
+Automatic adjustment of the size of the table in relation to the folio.
+Option to apply the geometry of an array to all the array linked to it, so that everything is homogeneous.
+Save / load table configuration and content to make creation faster.
+Option to automatically adjust the table to the folio.
+Option to automatically add new tables in new folios if the nomenclature cannot be contained in 1 to N folios / tables.
+
+* Table content:
+Fully customizable, you display what you want or want (info to display in the desired order, filter on type of element, filter on content of the info "contains, not contains, not empty etc ..." ).
+The content being generated from a sqlite database, you can write your own request.
+
+
+* Loading of element collections is now faster (thanks to the pugixml parser)
+* The loading of collections of elements no longer freezes QElectroTech.
+* The appearance and disappearance of the search / replace menu is animated.
+* Fix wrong position of slave xref after open a saved project
+
+* Add font color of the conductors (Simon).
+* Add section and color properties for wires.
+
+* config dialog :
+* Add QScrollArea to configdialog and resize to max_screen (Simon).
+* Add gui resize depending on screen size (Simon).
+* Add Screen info user (Simon).
+* Mod ScrollArea on demand (Simon).
+
+
+* Element editor:
+* Polygon editing widget, when you click on a point in the list, the corresponding point changes color in order to better visualize what you are doing.
+On this same list, a right click opens a contextual menu allowing to delete the selected point or inserted a point after the selected one.
+When holding the ctrl + directional arrow key, the selected parts move by 0.1 instead of 1 point.
+* with Ctrl key you can moving by keyboard primitives selected by 0.1 point instead by 1 points, added the same feature for moving the selected aera.
+* Added 140 web standard colors In Element editor (Arnaud).
+
+* Add multiedit feature (martin).
+* Add terminals uuid for next features (martin).
+
+
+* Windows :
+* Fix bad fonts rendering if Qt version >= 5.13.1.
+See : https://bugreports.qt.io/browse/QTBUG-83161
+* Fix backup file on windows
+For unknown reason KautoSaveFile don't write the file on Windows if file
+is open in another part of the code.
+No error is returned and use the method :
+qint64 QIODevice::write(const QByteArray &byteArray) return the good
+number of bytes written but the real file stay empty.
+Probably the problem don't come from KautoSaveFile but QFileDevice or
+QIODevice on windows.
+
+The fix consist to open the file just before write on it and close it
+just after.
+
+* writeToFile on a other Thread to improve this for windows performance (Simon).
+
+
+* macOS :
+* Add Fusion style and fix tilesets tab bar size
+* Enable mouse wheel on tilesets tab bar with command keyboard, thanks Giovanni.
+(removed by Qt upstream) https://codereview.qt-project.org/gitweb?p=qt/qtbase.git;a=commitdiff;h=ea47d152b35158ba07a55d009f57df0e4c2a048f;hp=08cc9b9991ae9ab51bed5b857b6257401401ff6f
+
+
+* Add Snap packages :
+* thanks Max for help.
+https://snapcraft.io/qelectrotech
+See: https://qelectrotech.org/forum/viewtopic.php?id=1426
+* Use kde-neon extension
+The kde-neon extension reduces our boilerplate in snapcraft.yaml
+and reduces the snap size considerably, as we do not need to ship
+any library that is already included in the kde-frameworks-5-core18
+snap itself.
+
+This limits qelectrotech builds to the architectures supported
+by kde-frameworks-5-core18, i.e. only amd64.
+
+https://git.tuxfamily.org/qet/qet.git/log/?qt=grep&q=snap
+
+
+
+* Add Flatpak packages :
+* thanks Mathieu for help.
+See: https://github.com/qelectrotech/qelectrotech-source-mirror/pull/18
+* remove the file name extension added
+automatically to the saved files even if the user sets an unknown file
+extension for the program.
+
+https://git.tuxfamily.org/qet/qet.git/log/?qt=grep&q=flatpak
+
+
+
+
+
+
+
+
+====== ChangeLog from 0.6 to 0.7 ======
+
+
+* Element editor :
+* Element informations (manufacturer, reference etc...) can be created directly from the element editor. For that go to the widget "Element Property"
+* It is no longer required to have a text field, for save the edited element.
+* Improve the behavior with the arrow keys (depending to the current selection  (nothing / one / several).
+* Context menu display only enabled actions.
+* Added new feature -> alignment.
+* Alignment of text field can be edited.
+* Added two new actions in context menu for insert or remove point of a selected polygon.
+* Rectangle can have rounded corner.
+* Polyline: finish the creation of polyline with the last point at the same position of the first point, close the polyline.
+
+
+* Diagram editor :
+* Conductors can now be drawn with two colors.
+* Improve High-DPI support on Windows and Linux plateform.
+* The code for the resize handles has been almost completely redesigned.
+* Dissociate fonts policy and size for independent text item and for summarry pages (foliolist), added a 2 button in config page for open Qfontdialog widget and choose policy for independent text item.
+* Add in config page a Qfontdialog widget for change dynamic text size, font family, orientation angle and text length, by default.
+* Basic shape add new CustomDashLine style with Dash Pattern (<< 10 << 10 );
+* It is now possible to add a text field to an element directly from the diagram.
+* Element text item with are now converted to dynamic element text item.
+* Element editor, part text can't be edited directly.
+* User can export / import the configuration of the texts and texts group of an element.
+* Context menu display only enabled actions.
+* Added new action in the context menu, multiple paste, check box for autonum the pasted element.
+* Multipaste -> improve the conductor autonum, conductors are numerated from top to bottom, and left to right.
+* Text of conductor can be placed at top/bottom/left/right of conductor, and text never overlaps the conductor.
+* Function for search conductor at the same potential.
+When the search function is searching in a terminal element, they search only for the first terminal found, no matter if the terminal element have more than two terminals.
+So the list of conductors at the same potential is missing some conductors.
+This commit fix it, now the search function search for every terminals of a terminal element.
+* When remove an element with several conductors connected to the same terminal, the electrical potential is partially or totally destroyed.
+This commit fix it : When element is removed one or several conductors are created (if needed) to conserve the electrical potential.
+
+* Added new feature -> alignment.
+* Alignment of text field can be edited.
+* Added new context menu action "group the selected texts".
+* Widget used to edit text item group can edit the pos of the group.
+* Element text item group can now be framed.
+* Added two new actions in context menu for insert or remove point of a selected polygon.
+* QETshapeItem rectangle can have rounded corner.
+* Add in config the possibility to start the numbering of the columns of titleblocks at 0.
+* Add new function Search and replace widget Crtl +F
+* Diagram properties, Element properties, Independent text item can be changed (and mass changed) through the search and replace widget.
+* Added 4 tools for edit the depth (Z value) of items.
+* Element panel : elements can be searched by their name but also with by all their informations.
+* New free selection style.
+* Diagram editor : dock used to edit the shape item, can now edit several items in the same time.
+* Dynamic element text item : The font of the dynamic texts can be individually be setted.
+
+* Adding or revoming diagram set project to modified
+* When user cleanning an project, set project to modified
+* Add a shortcut "Ctrl+Shift+P" to quickly open the dialog used for create the auto numbering rules.
+* Add missing StatusTip of some QAction
+
+* When user add a polygon, a message in statusBar show how to finish this shape
+* Polyline: finish the creation of polyline with the last point at the same position of the first point, close the polyline.
+
+
+
+* Plug-in : Add StatusTip instruction for install and launching DXF plugin depending on the operating system
+* when plugin qet-tb-generator"generate terminal blocks and connectors" isn't installed show an QMessageBox instruction now depending on the operating system for install it
+Add in QMessageBox url encoding/decoding for easy download packages
+
+* Elementspanelwidget: adds keyboard shortcuts to quickly move up, down,or move the targeted folio to the beginning of the project
+F3 MoveUp
+F4 MoveDown
+F5 MoveUpTop
+
+* Title block editor :
+Added new title block variables %projectpath, %projectfilename, %projecttitle, previous-folio-num and next-folio-num
+"%saveddate, %savedtime, %savedfilename and %savedfilepath" they variables should be updated after file save or save as dialog is confirmed,
+before file is saved.
+* NameList widget : add a combo box for easily paste texts, like the variables for title block.
+*  The font of the dynamic text field can be edited.
+* The font of the static text field can be edited.
+* The color of the static text field can be edited.
+
+
+
+* Improve for new qet_tb_generator plug-in : added the full path of the current project as
+an argument when calling the plug-in from QET if a project is open.
+If not a file dialog is showed to select the QET project.
+
+
+
+* QET create a backup file, use to restore the project when a crash occur.
+* Use KAutoSaveFile for the backup system, instead of home made function.
+* Use of QSAveFile instead a QFile.
+* User can enable and edit autosave timer.
+* let user define the file system path of the common,custom elements collections, and custom title blocks template.
+
+
+* QetGraphicsItem, remove the function applyRotation and rotateBy, and use instead the native function of QGraphicsItem : setRotation
+* Conductor is an herited class of QGraphicsObject, instead of QObject and QGraphicsPathItem
+* Clean (and reduce the size) the class QETDiagramEditor, mostly by replacing the connection syntax "signal -> slot" by "signal -> lambda".
+* Replace deprecated QMatrix by QTransform.
+
+
+* DXF export : fix some double items in dxf file.
+* DXF export : add some colors for basic shapes inside dxf.
+
+
+* Bug fix :
+* Fix compilation warning (clang and gcc).
+
+* Fix element text item alignment work well when text rotation != 0.
+* Fix crash when the properties of a element text item group
+* Fix crash occurred by the conductor and shape "ghost".
+* Fix element text alignment work also when font size change.
+* fix :
+1- When open a .qet by double click on it, QET ask user for open the backup file, of this .qet.
+2- On windows, if user open a project from the recent files menu, when close QET the file is deleted   user lose her work.
+clear the element texts when paste an element with the option "Do not store the labels of items in the copy paste" enabled.
+* elements can't be moved up and left, when there rotation are different than 0.
+* minor fix : slave link dialog doesn't display the good label, when the label of master element is build from formula.
+* Fix : in some condition, dynamic text are not at the same position when open a project.
+* On windows when user drag and drop an element from the common elements collection to the custom elements collection,
+the element file stay in read only mode, and so user can't save the element
+* Improvement : minimize the unwanted gap of the top right folio of the view (see https://qelectrotech.org/forum/viewtopic.php?pid=9379#p9379)
+* Fix: bug 168
+* Fix : when create multiple conductors with the free hand selection, the checking of existing potentiel don't search trought a folio report.
+* Fix:  DXF export.
+* Minor fix : remove from the element information the html hexadecimal and decimal characters of line feed and carriage return.
+* fix : in the diagram editor, when we select several shapes at the same time, the properties widget only apply the change to one shape.
+* Bug fix : when user load a project which contains summary pages, project was marked modified (summary was created on the fly and moved from the end on second
+position), now the project is no longer marked as amended when user have one or multiples summary pages when loading this project.
+* Static text of element are now exported to dxf
+* Fix Static text size of element exported to dxf
+* Improvement : minimize the unwanted gap of the top right folio of the view
+* Fix : when create multiple conductors with the free hand selection, the checking of existing potentiel don't search trought a folio report.
+* Don't display gui when qet is launched with specific argument
+
+
+
+====== ChangeLog from 0.5 to 0.6 ======
+In the official collection, there are now 4106 elements, and 539 categoris for a total of 4645 files
+
+* Improved performance, added multithreading to speed up the loading of items when launching QET.
+* RAM consumption has been considerably reduced.
+* New "collections" panel.
+* Automatic numberings (autonum), Variables and prefix.
+* Folio generator
+* Management Policy
+* New thickness properties for conductors.
+* The thickness of the lines of all basic shapes (lines, rectangles, ellipses, polygons) can be changed from 0,2px to 50,0px.
+* The color of lines and fillings of basic shapes can be choosed from a color palette or set with a html color code.
+* Added Copy/paste from another project.
+* Online documentation and links to download the latest packages of the version under development for Windows and MacOS are available directly from the software.
+* Resetting the layout of the summary pages.
+* In the panel left split the view into a several docks.
+* High-DPI support (Qt 5.6.0)
+* new python plugin to generate terminal block.
+* Windows packages are now created on a Debian operating system using cross-compilation and targeted to make executable binary files for these operating systems.
+This technical evolution allows a significant time saving during the creation of the packages. And we can provide also in the same time Windows XP and Vista packages by cross-compil with Qt 5.7.1 environment
+* The Mac OS X executable binary files are created on a virtual environment, moved compiler to latest LLVM clan version, improved dmg packages with added Info.plist.
+* An annoying memory leak has been found and solved. Afters hours of use, some users noticed that the RAM consumption growed steadily, up to 10GB or more. This problem is now solved.
+
+
+
+====== ChangeLog from 0.4 to 0.5 ======
+In the official collection, there are now  2625 elements, and 418 catégoris for a total of 3043 files.
+
+* Port to Qt 5 framework
+* New QSettings native format for config files.
+* In the diagram editor, the grid is not displayed by default outside the diagram, the minimum zoom is blocked. A button allows you to un-validate this operation.
+* It is now possible to put the tittle block on the right vertical mode.
+* The default tittle block can be defined for the next folios of the project.
+* The summary now takes the font set in the QElectroTech.conf
+* The floating dock is now operational, variables, actions are taken into account on the fly.
+* A transformation tool transforms quickly and finely each primitive by handles.
+* Add UUID tag for element XML.
+* The database enables faster loading a large number of managing symbols in tables changes pixmaps collections, it no longer compares the modification date of the files but their use UUID attributes to update the cache .
+* In terms of basic shapes, the transform tool works directly on vectors, it replaces the reduction tool / enlargement that has just been deleted as unnecessary.
+* Improve Undo command by QPropertyUndoCommand class.
+
+
+
+====== ChangeLog from 0.3 to 0.4 ======
+In the official collection, there are now 2298 elements, and 376 catégoris for a total of 2674 files.
+
+* We have removed the flag '-fno-ipa-sra "This settled the compilation problems on Mac OS X and FreeBSD clang.
+* The official collection has been redesigned, through the work of Nuri a new structure is in place.
+* A menu has been added, allowing you to change the application language.
+* we added a summary creation tool.
+* Added button "export the nomenclature" transforms data from diagrams to CSV file for spreadsheet.
+ Arun wrote a detailed manual in English.
+* New tools have been added, they can create mechanical connections and draw cabinets, desks, junction boxes, or areas on the schematic (line tool, rectangle, ellipse, polygon type: respect for style dashes).
+* An aid in positioning cross, drawing, was added.
+* The locked state images and basic forms (basic shapes) is now stored in the project.
+* The "control" during the movement of an element, text field disables snapping to the grid, for free positioning.
+It is now possible to choose the background folios in white or gray.
+* Add supports trackpad gestures (multitouch).
+The dates of the cartridges are now using the short system date and date format according to the language detected setting in the OS.
+We take advantage of the transition to standard C ++ 11, and a big cleanup in the code was done.
+* The undo action or redo the undo stack are now animated graphically.
+When the action save, save as, the status bar displays the name and path of the backup job.
+Qet is now able to come to load a style sheet (stylesheet) directly from the conf directory.
+* A DXF export has been added, the entire project folios can be exported in this format.
+* Added reports folio, Cross references.
+* Added a variable font size for text of conductors.
+* Added new properties to all conductors at the same potential, even through referrals.
+* When several conductors have the same value potential equalization, it is not useful to display on all conductors.
+* Added button to activates the automatic connection of the conductors of the element when moving it.
+* Numbering rules are now available for the entire project.
+Qet detects the Windows version and applies the appropriate graphic style, depending on the version of Windows.
+
+
+====== ChangeLog from 0.3 rc to 0.3 ======
+First, the collection of symbols has made a big step forward, with about 1560 new elements.
+There are now symbols for pneumatics, hydraulics, process, solar, cold, etc. Considerable effort has been done to organize the collection in a better way.
+We hope that the new organisation is clearer for all. We would like to thank all the contributors who send us symbols.
+
+=====-Element Editor: =====
+Considerable work has be done to replace the manual defining zone of the symbol, aka hotspot.And fix bugs, It is now automatic. You do not have to care about it anymore.
+Primary colors have been added for the drawing shapes.
+A contextual menu (right click) has been added. So, you can now work more quickly with symbols. It is also more user-friendly.
+
+====== ChangeLog from v0.3 rc ======
+
+=====-Element Editor: =====
+* Replacing checkboxes with lists of colors.
+* Removed the manual hotspot, it is now automatic and you do not have to worry.
+Officially Collection: a large classification work on the structure was realized. It should be clear to everyone.
+The collection is enriched with 1711 items in 286 categories (ie 1997 files)
+
+=====-Schema Editor:=====
+* Added import image, image rotation, image resizing and saving the file in the project.
+(Double click on the image called a widget and cursor that reduce or enlarge the selected image.)
+NB: Following the "edit image" entry will also be added in the right click menu.
+* F5 keyboard shortcut can recharge symbol collections.
+Some bugs have been resolved, and the translation status continues to grow.
+
+
+======ChangeLog from v0.3 beta ======
+Two more items for the changelog:
+* In the official collection, there are now 1672 elements and 256 categoris for a total of 1928 files. In version 0.3 alpha, there were 1465 elements and 233 categories, while version 0.22 had153 elements and 51 categories.
+
+*Progress in the translation (see http://qelectrotech.org/wiki/doc/translation/stats for current state)
+* Functions (edit element and find in panel) have been moved to the context
+Here is the changelog, for version 0.3 beta:
+* Functions (edit element and find in panel) have been moved to the context menu, that can be accessed with right click. This is more user friendly.
+* Refresh of categories when an element is moved.
+* DateNow button added in the "Diagram property" dialog.
+* Dotted lines can now been added between conductors.
+* Rich text can be added to the diagram text fields.
+[screenshot]
+* HTML WYSIWYG editor for rich text: bold, italic, underlined, font size from 6 to 72 pixels, font colour, etc.
+* You can change between the two modes(Selection mode <-> View mode) with the scroll button.
+* Symbol editor: focus on the new value for language, languages sorted in alphabetical order.
+* Added a widget that reflects the loading of a big project.
+* Automated numbering of conductors according to your rules. See note from Joshua http://qelectrotech.org/wiki/doc/autonum
+* Added a dialog to automatically rotate the text if the associated conductor is vertical or horizontal. Parameters are saved in qelectrotech.conf
+* Added basic colours on the tools for lines and for the filling of the primitives, and also for the style line and point in the element editor.
+* Added several protection to prevent from saving an element if one of its primitive is beyond the hotspot.
+
+
+====== ChangeLog from 0.22 to 0.3a ======
+
+===== Application =====
+
+Elements collection: QElectroTech now provides 1465 elements within 233 categories (0.22 provided 153 elements within 51 categories). Most elements are related to electricity though some relate to chillers, solar, hydraulic and pneumatic engineering.
+A new kind of collections appeared to store title block templates; as for elements, there is a distinction between common (system-wide) templates and custom (user-wide) templates.
+Translations:
+English, Spanish, French, Portuguese and Czech translations have been maintained.
+Russian translations have been removed because they are not maintained anymore.
+Polish, German, Italian, Arabic and Croatian translations have been added.
+Following translation to Arabic, some work was done to improve Right-To-Left languages support.
+Elements names are fully translated to English, French, Czech and Polish.
+Main windows: added a “What's this?” action.
+QElectroTech now handles *.titleblock files.
+
+===== Diagram editor =====
+
+It is now possible to move and rotate all texts on a diagram : element texts, conductor texts and independent texts.
+When moving a text related to an electrical element, this element is highlighted.
+Texts related to a conductor cannot be moved too far away from it.
+It is now possible to create diagrams with more than 100 rows/columns.
+Elements panel:
+During a drag and drop operation, the hovered item is now expanded after a short time not moving the mouse.
+Items are now expanded/collapsed by a double click.
+Common, custom and embedded collections of title block templates are displayed within the elements panel.
+Elements previews and names are now cached into a SQLite database stored in the user configuration directory, thus speeding up the elements panel (re)loading
+The elements panel now displays the folio index before each diagram title.
+UI consistency: renamed “Import element” to “Open an element file”, separated this action from those related to the current selection, and ensured elements-related actions are disabled when selecting a project/diagram/title block template.
+Freshly integrated elements are now highlighted in the elements panel – this behaviour can be disabled though.
+When clearing the search field, the panel state is restored to its previous state.
+Title blocks are now rendered using templates:
+For each diagram, users can choose the template to be used in the diagram properties.
+They may also drag and drop it from the elements panel to the diagram.
+Title block templates are always integrated within the parent project.
+Fixed a bug in the print preview dialog.
+Added a F2 shortcut for the widget “Edit the color of the given conductor”.
+As elements, diagrams now have a “version” attribute for compatibility purposes.
+Better handling of file opening for documents saved with newer versions of QElectroTech.
+Diagram loading: removed an optimization that could lead to conductors not being loaded when several terminals share the same coordinates.
+Users may now enter visualisation mode by pressing Ctrl and Shift.
+Printing: when printing diagrams with no title block, use the space left by the title block.
+Added a few status and “What's this?” tips.
+Got rid of the green icon used for projects, changed a few other icons.
+
+===== Element editor =====
+
+Both static and dynamic texts can now be rotated
+Added “dotted” line style
+Added white color for texts
+Newly added parts are placed above existing ones.
+
+===== Title block template editor =====
+
+A third kind of editor was implemented so users can create their own title block templates:
+
+It allows users to customize the layout and content of cells that constitute the title block.
+Cells can be merged and splitted.
+Their width can be fixed, relative to the total width or relative to the remaining widths.
+Their height is a simple fixed length.
+They contain either a logo (be it in SVG or a usual bitmap format) or some text.
+The text value is optionally preceded by a label.
+As other texts within QElectroTech, labels and texts can be translated to other languages.
+Texts and labels may contain variables (e.g. %company-name); these variables are replaced by real world values once the template is applied to a diagram.
+Those real-world values can be set among the diagram properties.
+
+
+====== Changelog 0.11 -> 0.2 ======
+À partir de la version 0.2, QElectroTech est disponible en français, anglais, mais aussi :
+  * en espagnol, grâce aux traductions de Youssef ;
+  * en russe, grâce aux traductions de Yuriy ;
+  * en portugais, grâce aux traductions de José.
+L'application utilise désormais le thème d'icônes Oxygen, réalisé par Nuno Pinheiro pour le projet KDE.
+
+===== Notion de fichier projet =====
+Un fichier .qet peut désormais contenir zéro, un ou plusieurs schémas électriques. Les éléments composant ces schémas sont embarqués dans le fichier projet au moment où ils sont posés sur un schéma. Le panel d'éléments affiche donc désormais :
+  * les projets ouverts, avec, sous chaque projet :
+    * les schémas de ce projet,
+    * la collection embarquée du projet (catégories et éléments utilisés dans les schémas)
+  * la collection commune fournie par QET,
+  * et la collection personnelle de l'utilisateur.
+
+===== Éditeur de schémas =====
+  * Il est désormais possible de déplacer et copier les catégories et éléments par simple glisser-déposer (drag'n drop) dans le panel d'éléments.
+  * La collection embarquée est manipulable au même titre que la collection utilisateur. Les éléments inutilisés dans le projet apparaissent sur fond rouge et un dialogue permet de les purger rapidement.
+  * Chaque projet embarque également (au niveau de ses propriétés) les paramétrages par défaut pour les nouveaux schémas, cartouches et conducteurs.
+  * Il est possible de changer l'ordre des schémas dans le projet en déplaçant les onglets qui les représente. Dans le champ "Folio" des cartouches, on peut se référer à la position du schéma courant ou au nombre total de schémas dans le projet en écrivant respectivement %id et %total.
+  * Lors du chargement d'un fichier .qet, si des éléments ne sont pas trouvés, ils sont remplacés par un élément "fantôme", ce qui évite de perdre certaines informations lors de l'enregistrement du fichier.
+  * Le rendu avec un zoom réduit a été amélioré.
+  * Enfin, le logiciel gère l'ouverture en lecture seule d'un fichier projet.
+
+==== Impression et export ====
+
+À partir de la version 0.2, QElectroTech :
+  * propose d'utiliser une imprimante réelle ou bien de générer un document PDF ou PostScript, et ce sous Windows comme sous X11.
+  * génère un aperçu avant l'impression d'un projet. Cet aperçu permet de choisir les options d'impression mais également les schémas à imprimer ou non.
+
+À noter toutefois une limitation pour les impressions PDF/PS sous Windows : le dialogue de mise en page, permettant de spécifier le format du papier ainsi que ses marges, n'est pas disponible.
+
+Le dialogue "Exporter" (pour générer un fichier image d'un schéma) a également été refait dans l'optique d'un export simultané de tous les schémas du projet.
+
+===== Éditeur d'éléments =====
+
+  * Lorsque l'on dessine une ligne dans l'éditeur d'éléments, il est possible de choisir un embout différent pour chaque extrémité, comme par exemple une flèche, un cercle, un carré ou, tout simplement, un bout de ligne normal.
+  * La forme "Rectangle" a été ajoutée.
+  * On peut enregistrer un élément en désignant un fichier (= comportement en 0.11) ou bien en choisissant un élément cible dans une liste reprenant l'arborescence du panel d'éléments.
+  * Si l'on maintient la touche Shift lorsque l'on ajoute une partie (droite, cercle, texte, ...), l'outil en cours est conservé après le dessin. Sinon l'éditeur repasse sur l'outil de sélection.
+  * La grille a été améliorée : sa densité varie en fonction du zoom ; les points correspondant à ceux de la grille de l'éditeur de schémas sont mis en valeur.
+  * L'accrochage à la grille (aka "snap to grid", également connu sous le nom de grille magnétique ou encore grille aimantée) a été ajouté. Le dessin s'y accroche désormais avec une précision de 1px. On peut travailler en coordonnées libres en maintenant la touche Ctrl enfoncée durant le dessin.
+  * Le copier-coller a été implémenté : il est possible de coller :
+     * avec le bouton du milieu de la souris
+     * en choisissant une "zone de collage" sur l'élément (Ctrl+Shift+V)
+     * directement (Ctrl+V) : les parties collées sont placées à côté des parties copiées ; si on recolle les parties, elles sont collées encore un cran à côté, et ce de manière incrémentale.
+  * Des contrôles sont désormais effectués à l'enregistrement : présence de bornes, respect du cadre, etc.
+  * Uniformisation des menus par rapport à l'éditeur de schémas
+
+====== Changelog 0.1 -> 0.11 ======
+
+===== Fonctionnalités et interface =====
+
+  * L'application est désormais capable d'ouvrir un fichier élément passe en paramètre
+  * L'application se lance désormais une seule fois par utilisateur
+  * Lors de l'ouverture d'un fichier en dehors de l'application alors que QET est déjà démarré celui-ci essaye de s'afficher ou d'attirer l'attention de l'utilisateur.
+  * L'application vérifie que ce fichier n'est pas déjà ouvert dans tous les éditeurs de schémas / éléments.
+  * Ajout de fichiers permettant d'automatiser les associations de fichiers sous Windows (.bat et .reg) et X11 (.desktop et .xml)
+  * Ajout de menus "Récemment ouverts" pour accéder aux fichiers récents dans les éditeurs de schémas et éléments.
+  * Ajout d'un splash screen
+  * La hauteur du schéma est désormais gérée via un système de lignes, dont le nombre et la hauteur sont ajustables.
+  * Il est également possible d'afficher ou non les en-têtes des lignes et/ou des colonnes.
+  * Ajout d'une option --lang-dir
+  * Ajout d'une description dans le dialogue des options d'impression
+  * Ajout de pages de manuel Unix (`man') en anglais et en français
+
+===== Corrections de bugs =====
+
+  * Bug #12 : QET provoquait une erreur de segmentation dès son démarrage dans un environnement sans systray
+  * Bug #14 : il manquait un / dans le chemin proposé lors de l'impression vers un PDF
+  * Bug #15 : Mauvais positionnement des champs de texte sur le schéma
+  * Bug #16 : Mauvaise gestion des modifications du texte d'un conducteur
+  * La classe DiagramView écrivait sur la sortie d'erreur sans fin de ligne
+  * L'option --config-dir était mal prise en compte
+  * Après fermeture d'un schema, le menu Fenêtres n'était pas correctement mis à jour
+  * Les textes des éléments, des conducteurs, du cartouche ainsi que les textes indépendants utilisent désormais tous la même police.
+  * Remise à niveau de l'impression suite au passage à Qt 4.4
+
+===== Code et détails techniques =====
+
+  * Corrections pour que QET compile avec gcc-4.3
+  * Les classes Conductor et Element héritent désormais de QObject (dépendance sur Qt 4.4)
+  * Affinage du constructeur de la classe QETApp
+  * Moins d'avertissements à la compilation (testé avec gcc 4.3)
+  * Moins d'inclusions non pertinentes
+
+
 ## Version 0.100
 
 _Compiled from provided commit logs and contributor notes._

ChangeLog.MD

@@ -2,13 +2,102 @@
 
 ## [Unreleased](https://github.com/qelectrotech/qelectrotech-source-mirror/tree/HEAD)
 
-[Full Changelog](https://github.com/qelectrotech/qelectrotech-source-mirror/compare/0.9...HEAD)
+[Full Changelog](https://github.com/qelectrotech/qelectrotech-source-mirror/compare/nightly...HEAD)
+
+**Closed issues:**
+
+- “Exclude from auto-numbering” and “Potential isolation” tick boxes fault [\#482](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/482)
+- Add ability to change appearance of multiple lines at once [\#476](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/476)
+- Save As dialog asks for "element name" but actually requires a file name [\#469](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/469)
+- Some icons are illegible with dark theme [\#466](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/466)
+- \[BUG\] Properties to all conductors [\#460](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/460)
+- Internal links in PDF export [\#417](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/417)
+- Apple silicon download is not working [\#400](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/400)
+- Add missing title block variables to 'folio properties' window [\#271](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/271)
+- Bug: Saving a read-only project doesn't clear the read-only state [\#217](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/217)
+
+**Merged pull requests:**
+
+- PartText: keep text position stable across save/reopen on font-size change \(\#158\) [\#501](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/501) ([ispyisail](https://github.com/ispyisail))
+- Clear read-only state when a project is saved to a writable file [\#497](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/497) ([ispyisail](https://github.com/ispyisail))
+- Fix regional system locale loading the wrong translation \(pt\_BR/nl\_BE/nl\_NL\) [\#496](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/496) ([ispyisail](https://github.com/ispyisail))
+- Folio properties: auto-add a title block's custom variables [\#495](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/495) ([ispyisail](https://github.com/ispyisail))
+- Element editor Save As: label the field as a file name, not 'element name' [\#494](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/494) ([ispyisail](https://github.com/ispyisail))
+- CLI: add --set-titleblock, and fix headless backup crash [\#493](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/493) ([ispyisail](https://github.com/ispyisail))
+- Update qet\_zh.ts [\#491](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/491) ([zi-mozhuang](https://github.com/zi-mozhuang))
+- CLI: clickable cross-reference hyperlinks in PDF export [\#490](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/490) ([ispyisail](https://github.com/ispyisail))
+- CLI: add verification & data-export tools \(info, BOM, nets, links, check-elements, resave\) [\#489](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/489) ([ispyisail](https://github.com/ispyisail))
+- Issues 482 [\#488](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/488) ([Kellermorph](https://github.com/Kellermorph))
+- Revert "Update-UI-Chinese-translation" [\#486](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/486) ([scorpio810](https://github.com/scorpio810))
+- CLI export: don't draw the editor grid in PDF/PNG/SVG output [\#485](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/485) ([ispyisail](https://github.com/ispyisail))
+- Update-UI-Chinese-translation [\#484](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/484) ([zi-mozhuang](https://github.com/zi-mozhuang))
+- Add headless command-line export \(PDF / PNG / SVG / cable-list / wire-list\) [\#483](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/483) ([ispyisail](https://github.com/ispyisail))
+- fix possible crashes in crossrefitem [\#479](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/479) ([ChuckNr11](https://github.com/ChuckNr11))
+- Fix: Dynamic element text shifting/jumping when duplicating diagrams [\#477](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/477) ([Kellermorph](https://github.com/Kellermorph))
+- Update German translations for duplicate diagram feature [\#475](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/475) ([Kellermorph](https://github.com/Kellermorph))
+- Feat: Add ability to duplicate diagrams/folios with all metadata and … [\#473](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/473) ([Kellermorph](https://github.com/Kellermorph))
+- Feature: Allow excluding specific elements from BOM \(Nomenclature\) [\#472](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/472) ([Kellermorph](https://github.com/Kellermorph))
+- Potential Isolation option for terminals [\#471](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/471) ([Kellermorph](https://github.com/Kellermorph))
+- Fix: Wiring list filter and dynamic text timing [\#470](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/470) ([Kellermorph](https://github.com/Kellermorph))
+- New element: Line definition [\#464](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/464) ([Kellermorph](https://github.com/Kellermorph))
+- Turkish Lang Update  [\#463](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/463) ([scorpio810](https://github.com/scorpio810))
+- follow up: wiring list [\#462](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/462) ([Kellermorph](https://github.com/Kellermorph))
+- Fix and Improve Multi-selection for Diagram Operations [\#459](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/459) ([Kellermorph](https://github.com/Kellermorph))
+
+## [nightly](https://github.com/qelectrotech/qelectrotech-source-mirror/tree/nightly) (2026-05-10)
+
+[Full Changelog](https://github.com/qelectrotech/qelectrotech-source-mirror/compare/0.100...nightly)
+
+**Closed issues:**
+
+- Flatpak runtimes outdated [\#446](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/446)
+- Move Flemish man pages from man/be/ to man/nl\_BE/ [\#439](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/439)
+- you could share an PR to fix it? [\#438](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/438)
+- Diacritics in some filenames can possibly lead to the problems during packaging [\#437](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/437)
+- שרטוט חשמל [\#435](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/435)
+- Feature request: add circuit simulation [\#432](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/432)
+- No usable sources archive for version 0.100 [\#418](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/418)
+- New release ? [\#411](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/411)
+- options moving when opening "file", "edition" menus [\#299](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/299)
+
+**Merged pull requests:**
+
+- Try to add Windows build CI workflow [\#457](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/457) ([scorpio810](https://github.com/scorpio810))
+- Fixed: Prevented the selection in the project tree from jumping to the last page when saving. [\#456](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/456) ([Kellermorph](https://github.com/Kellermorph))
+- Fix Thumbnail in Makrotree [\#455](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/455) ([Kellermorph](https://github.com/Kellermorph))
+- Update German translation for macro feature [\#454](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/454) ([Kellermorph](https://github.com/Kellermorph))
+- Fix losing Focus on moving diagram position with keyboard [\#452](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/452) ([ChuckNr11](https://github.com/ChuckNr11))
+- Draft: Feature - Introduce User Templates Collection and Dedicated UI Tab [\#451](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/451) ([Kellermorph](https://github.com/Kellermorph))
+- Update translation [\#450](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/450) ([Kellermorph](https://github.com/Kellermorph))
+- Automatic Terminal Numbering Tool [\#449](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/449) ([Kellermorph](https://github.com/Kellermorph))
+- Supplement to pull request \#444 by Kellermorph [\#448](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/448) ([ChuckNr11](https://github.com/ChuckNr11))
+- Add RAM-based wiring list export [\#447](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/447) ([Kellermorph](https://github.com/Kellermorph))
+- Follow-up: Address review comments for slave limit feature [\#444](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/444) ([Kellermorph](https://github.com/Kellermorph))
+- Feature: Auto-select active diagram in the elements panel tree [\#443](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/443) ([Kellermorph](https://github.com/Kellermorph))
+- Revert "Feature: Implement max\_slaves limit for Master elements" [\#442](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/442) ([scorpio810](https://github.com/scorpio810))
+- Feature: Implement max\_slaves limit for Master elements [\#441](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/441) ([Kellermorph](https://github.com/Kellermorph))
+- Update qet\_cs.ts [\#434](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/434) ([pafri](https://github.com/pafri))
+- Update QCH Help file [\#433](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/433) ([Int-Circuit](https://github.com/Int-Circuit))
+- Create Korean man page for QElectroTech [\#431](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/431) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Update ELEMENTS.LICENSE [\#430](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/430) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Update CREDIT [\#429](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/429) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Add Korean comments to QElectroTech XML file [\#428](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/428) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Add Spanish and Korean summaries to appdata [\#427](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/427) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Add Korean translations for comments and generic names [\#426](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/426) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Restore copyright and license information in QET64.nsi [\#425](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/425) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Add Korean language strings to lang\_extra.nsh [\#424](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/424) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Add Korean translation author to aboutqetdialog [\#423](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/423) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Add Korean language support in xml element collection [\#422](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/422) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+- Add Korean translation \(ko\) – translated by jkh [\#419](https://github.com/qelectrotech/qelectrotech-source-mirror/pull/419) ([Kyle-Code-CA](https://github.com/Kyle-Code-CA))
+
+## [0.100](https://github.com/qelectrotech/qelectrotech-source-mirror/tree/0.100) (2026-01-25)
+
+[Full Changelog](https://github.com/qelectrotech/qelectrotech-source-mirror/compare/0.9...0.100)
 
 **Closed issues:**
 
 - error in doxygen action code [\#414](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/414)
 - "NoName" is automatically inserted into empty text cells in title block [\#407](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/407)
-- Apple silicon download is not working [\#400](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/400)
 - Apple silicon download is not working [\#394](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/394)
 - Differenciating connector for proper labeling [\#390](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/390)
 - Non-perpendicular connections [\#368](https://github.com/qelectrotech/qelectrotech-source-mirror/issues/368)

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = QElectroTech
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = " 0.100.0-dev"
+PROJECT_NUMBER         = " 0.200.1"
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

ELEMENTS.LICENSE

@@ -1,3 +1,20 @@
+[ca]
+La col·lecció d'elements que s'inclou amb QElectrotech es proporciona tal com és 
+i sense cap garantia que sigui adequada per al vostre ús o que funcioni correctament. 
+L'ús, la modificació i la integració d'aquests elements en esquemes elèctrics 
+estan permesos sense restriccions, independentment de la llicència final que regeixi 
+els esquemes.
+No es permet utilitzar aquest programari ni cap fitxer associat
+com a dades de mostra per crear models d'aprenentatge automàtic.
+
+Si redistribuïu la totalitat o una part de la col·lecció QElectroTech, 
+amb o sense modificacions, fora d'un esquema elèctric, heu de complir 
+les condicions de la llicència CC-BY:
+Aquesta obra està subjecta a la llicència Reconeixement 3.0,
+disponible en línia a http://creativecommons.org/licenses/by/3.0/ o bé
+sol·licitant-la per correu a Creative Commons, 171 Second Street, Suite 300, San Francisco,
+Califòrnia 94105, EUA.
+
 [en]
 The elements collection provided along with QElectroTech is provided as is and
 without any warranty of fitness for your purpose or working.
@@ -96,19 +113,6 @@ Para ver una copia de esta licencia, visite
 http://creativecommons.org/licenses/by/3.0/ o envie una carta a Creative
 Commons, 171 Second Street, Suite 300, San Francisco, California 94105, USA.
 
-[ca]
-La col·lecció de símbols QElectrotech és distribuïda tal qual i sense cap
-garantia d'idoneïtat d'ús ni de funcionament.
-Es permet incondicionalment, amb independència de la llicència final, emprar,
-editar, i incloure aquests símbols en esquemes elèctrics.
-Si vostè redistribueix una part de la col·lecció de QElectrotech o tota ella,
-amb condicions o sense, separadament d'un esquema elèctric, haurà de respectar
-les condicions de la llicència CC-BY:
-Aquesta obra es troba sota una llicència Reconeixement 3.0 de Creative Commons.
-Per veure una còpia d'aquesta llicència visiti
-http://creativecommons.org/licenses/by/3.0/ o enviï una carta a Creative
-Commons, 171 Second Street, Suite 300, San Francisco, California 94105, 
-
 [cs]
 Sbírka prvků poskytovaná společně s QElectroTechem je poskytována tak, jak je,
 bez záruky nebo vhodnosti pro váš účal nebo práci.

INSTALL

@@ -1,164 +0,0 @@
-[ca]
-Dependències:
-libQt5 (paquets libqt5*)
-cupsys-bsd per imprimir
-
-Com compilar:
-$ qmake (qmake-qt5 pels sistemes basats en Debian)
-$ make
-# umask 0022
-# make install
-
-[en]
-Requirements :
-libQt5 (see packages libqt5*)
-cupsys-bsd for printing
-
-Howto compile :
-$ qmake (qmake-qt5 for Debian-based systems)
-$ make
-# umask 0022
-# make install
-
-[fr]
-Pré-requis :
-libQt5 (paquets libqt5*)
-cupsys-bsd pour l'impression
-
-Comment compiler :
-$ qmake (qmake-qt5 pour les systèmes basés sur Debian)
-$ make
-# umask 0022
-# make install
-
-[de]
-Abhängigkeiten:
-libQt5 (Pakete libqt5*)
-cupsys-bsd zum Drucken
-
-Kompilieren:
-$ qmake (qmake-qt5 für Debian-basierende Systeme)
-$ make
-# umask 0022
-# make install
-
-[ru]
-Зависимости:
-libQt5 (пакет libqt5*)
-cupsys-bsd для печати
-
-Как компилировать?:
-$ qmake (qmake-qt5 для систем основанных на Debian)
-$ make
-# umask 0022
-# make install
-
-[pt]
-Dependências:
-libQt5 (ver pacotes libqt5*)
-cupsys-bsd para impressão
-
-Como compilar:
-$ qmake (qmake-qt5 para sistemas baseados em Debian)
-$ make
-# umask 0022
-# make install
-
-[es]
-Dependencias:
-libQt5 (paquetes libqt5*)
-cupsys-bsd para imprimir
-
-Cómo compilar:
-$ qmake (qmake-qt5 para los sistemas basados en Debian)
-$ make
-# umask 0022
-# make install
-
-[cs]
-Požadavky :
-libQt5 (viz balíček libqt5*)
-cupsys-bsd kvůli tisku
-
-Jak program sestavit :
-$ qmake (qmake-qt5 u systémů založených na Debianu)
-$ make
-# umask 0022
-# make install
-
-[pl]
-Zależności:
-libQt5 (pakiety libqt5 *)
-cupsys-bsd do druku
-
-Sposób kompilacji:
-$ qmake (qmake-qt5 dla systemów opartych na Debianie)
-$ make
-# umask 0022
-# make install
-
-[it]
-Dipendenze:
-libQt5 (vedi pacchetti libqt5*)
-cupsys-bsd per la stampa
-
-Come compilare:
-$ qmake (qmake-qt5 per sistemi basati su Debian)
-$ make
-# umask 0022
-# make install
-
-[el]
-Απαιτήσεις:
-libQt5 (δείτε για πακέτα libqt5*)
-cupsys-bsd για εκτύπωση
-
-Πως να το μεταγλωττίσετε:
-$ qmake (qmake-qt5 για συστήματα βασισμένα σε Debian)
-$ make
-# umask 0022
-# make install
-
-[nl]
-vereisten:
-libqt5 (zie pakketten libqt5 *)
-cupsys-bsd om af te drukken  
-
-Hoe te compileren:
-     $ Qmake (qmake-qt5 voor Debian-gebaseerde systemen)
-     $ make
-     # Umask 0022
-     # Make install
-
-[be]
-Vereisten:
-libQt5 (pakketten libqt5*)
-cupsys-bsd voor het afdrukken
-
-Hoe te compileren :
-$ qmake (qmake-qt5 voor systemen op basis van Debian)
-$ make
-# umask 0022
-# make install
-
-[da]
-Krav:
-libQt5 (se pakke libqt5*)
-cupsys-bsd til udskrivning
-
-Hvordan man kompilerer:
-$ qmake (qmake-qt5 for Debian baserede systemer)
-$ make
-# umask 0022
-# make install
-
-[ja]
-必要条件 :
-libQt5 (パッケージ libqt5* を参照)
-cupsys-bsd 印刷用
-
-コンパイルの方法 :
-$ qmake (Debian ベースのシステムでは qmake-qt5)
-$ make
-# umask 0022
-# make install

INSTALL.md

@@ -0,0 +1,349 @@
+# Building QElectroTech from source
+
+QElectroTech is built with **CMake** and requires the  **current Qt6 only**; Qt5 and the
+old `qmake`-based build described in earlier versions of this file have
+been retired.
+
+## 1. Getting the source
+
+QET uses git submodules, so clone recursively:
+
+```sh
+git clone --recursive https://github.com/qelectrotech/qelectrotech-source-mirror.git
+cd qelectrotech-source-mirror
+```
+
+If you already have a non-recursive clone:
+
+```sh
+git submodule update --init --recursive
+```
+
+## 2. Requirements
+
+| Component | Status | Notes |
+|---|---|---|
+| CMake ≥ 3.5 | required | CMake 4.3+ is also fine, see note below |
+| C++17 compiler | required | GCC or Clang on Unix-like platforms; MSVC or MinGW-w64 g++ on Windows — see [Choosing a compiler](#3-choosing-a-compiler-unix) / [Building on Windows](#6-building-on-windows-msvc--mingw) |
+| Qt6 base + widgets | required | |
+| Qt6 **GuiPrivate** headers | required | needed for clickable PDF hyperlinks; **hard build failure** at CMake generate time if missing, see below |
+| SQLite3 | required | used by the nomenclature/summary database |
+| Qt Linguist tools (`lrelease`) | required | compiles the tracked `.ts` files into `.qm` as part of every normal build |
+| pugixml | handled automatically | fetched and built via CMake FetchContent if not already present on the system — see [pugixml](#8-pugixml) below |
+| Qt Test module | required if building tests | `PACKAGE_TESTS` is `ON` by default; QtTest ships as part of the base Qt6 dev packages listed below on every platform, no extra package needed |
+| KDE Frameworks (KF6) | optional | see [Building without KDE Frameworks](#9-building-without-kde-frameworks) |
+| QtPdf module | optional | see [PDF page import](#7-pdf-page-import-qtpdf) |
+
+A note on CMake versions: the project declares a minimum of 3.5 but is
+routinely built with much newer releases; if your CMake is older than 4.3 it
+simply won't have the newer `SQLite3::SQLite3` target name, which the build
+script compensates for automatically. There is nothing you need to do either
+way.
+
+## 3. Building (out-of-source build)
+
+Always build in a separate directory from the source tree — in-source builds
+are not supported.
+
+```sh
+mkdir build
+cd build
+cmake ..
+cmake --build . --parallel
+```
+
+For a Unix-like platform you'll usually also want an explicit build type,
+since CMake's default (empty) build type means no optimization and no
+debug info either:
+
+```sh
+cmake .. -DCMAKE_BUILD_TYPE=Release
+```
+
+To install (default prefix is `/usr/local`; adjust with
+`-DCMAKE_INSTALL_PREFIX=...` at the configure step if needed):
+
+```sh
+sudo cmake --install .
+```
+
+Useful configure-time options (pass as `-D<OPTION>=ON/OFF`):
+
+| Option | Default | Effect |
+|---|---|---|
+| `PACKAGE_TESTS` | `ON` | build the test suite (needs the Qt Test module) |
+| `BUILD_WITH_KF` | distro-dependent | build against KDE Frameworks; see below |
+| `QET_ENABLE_PCH` | `OFF` | precompiled headers for faster rebuilds (needs CMake ≥ 3.16) |
+
+## 3.1 Choosing a compiler (Unix)
+
+Both **GCC** and **Clang** are supported on Unix-like platforms; any
+reasonably recent release with solid C++17 support works. Neither is
+hard-coded — CMake picks up whichever `cc`/`c++` (or `CC`/`CXX` environment
+variables) resolve to by default, and you can force one explicitly at
+configure time:
+
+```sh
+cmake .. -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++
+# or
+cmake .. -DCMAKE_C_COMPILER=gcc   -DCMAKE_CXX_COMPILER=g++
+```
+
+or equivalently, by exporting `CC`/`CXX` before calling `cmake`. The
+per-distro package lists below install GCC by default (via
+`build-essential`/`gcc-c++`/the base toolchain); see each section for the
+Clang alternative.
+
+## 4. Distribution packages
+
+Exact package names vary by release/branch; if a name below doesn't resolve,
+search your package manager (`apt search`, `pkg search`, `brew search`) for
+the closest match.
+
+### Debian / Ubuntu
+
+```sh
+sudo apt install \
+    build-essential cmake ninja-build git \
+    qt6-base-dev qt6-base-private-dev qt6-tools-dev qt6-tools-dev-tools \
+    libsqlite3-dev \
+    libkf6coreaddons-dev libkf6widgetsaddons-dev
+```
+
+`qt6-base-private-dev` is **not** pulled in automatically by `qt6-base-dev`
+but is mandatory for the build (see
+[Qt6 private headers](#6-qt6-private-headers-mandatory) below).
+
+For Clang instead of GCC:
+
+```sh
+sudo apt install clang
+```
+
+Optional, for PDF page import:
+
+```sh
+sudo apt install libqt6pdf6-dev
+```
+
+Optional, to use a system pugixml instead of letting CMake fetch it:
+
+```sh
+sudo apt install libpugixml-dev
+```
+
+### Fedora / RHEL
+
+```sh
+sudo dnf install \
+    cmake gcc-c++ git \
+    qt6-qtbase-devel qt6-qtbase-private-devel qt6-qttools-devel \
+    sqlite-devel \
+    kf6-kcoreaddons-devel kf6-kwidgetsaddons-devel
+```
+
+For Clang instead of GCC: `sudo dnf install clang`.
+
+Optional, for PDF page import: `qt6-qtwebengine-devel` provides `QtPdf` on
+some Fedora releases — check `dnf provides '*/QPdfDocument'` if unsure.
+
+Optional, for a system pugixml: `sudo dnf install pugixml-devel`.
+
+### FreeBSD
+
+```sh
+pkg install \
+    cmake git \
+    qt6-base qt6-tools \
+    sqlite3 \
+    kf6-kcoreaddons kf6-kwidgetsaddons
+```
+
+(from ports: `devel/qt6-base`, `devel/qt6-tools`, `databases/sqlite3`,
+`devel/kf6-kcoreaddons`, `x11-toolkits/kf6-kwidgetsaddons`.) Qt6's
+`GuiPrivate` headers ship as part of `qt6-base` on FreeBSD, no separate
+package is needed. `QtPdf` is not packaged on FreeBSD at the time of writing
+— PDF page import will simply be disabled (see below).
+
+Clang is the FreeBSD base system compiler and needs nothing extra; GCC is
+available via `pkg install gcc` if you'd rather use it.
+
+Optional, for a system pugixml: `pkg install pugixml` (`devel/pugixml`).
+
+### macOS
+
+Using [Homebrew](https://brew.sh):
+
+```sh
+brew install cmake qt sqlite ninja
+```
+
+Homebrew's `qt` formula is Qt6 and includes the private headers, so no
+extra package is required there. KDE Frameworks are not practically
+available via Homebrew, so macOS builds are normally done **without KF**
+(`-DBUILD_WITH_KF=OFF`) — see the caveat below.
+
+Apple's Clang (from the Xcode Command Line Tools, `xcode-select --install`)
+is the default and needs no extra package; GCC is available via
+`brew install gcc` if you specifically want it instead.
+
+Optional, for a system pugixml: `brew install pugixml`.
+
+### Windows
+
+See [Building on Windows](#6-building-on-windows-msvc--mingw) below — the
+package sources differ enough from the Unix-like platforms above (no system
+package manager, SQLite3 and Qt aren't provided the same way) that it gets
+its own section.
+
+## 5. pugixml
+
+QET links against [pugixml](https://pugixml.org) for XML parsing.
+`cmake/fetch_pugixml.cmake` handles this automatically: if a suitable
+pugixml isn't already available on the system, CMake fetches and builds it
+from source via `FetchContent` as part of the normal configure step — you
+don't need to do anything to get a working build.
+
+If you'd rather avoid that network fetch and use your distribution's own
+pugixml package instead, install it before running `cmake ..` (package
+names are listed per platform in the [Distribution
+packages](#4-distribution-packages) section above — e.g. `libpugixml-dev`
+on Debian/Ubuntu, `pugixml-devel` on Fedora).
+
+## 6. Building on Windows (MSVC / MinGW)
+
+Both toolchains QET's CMake build targets on Windows are covered here:
+**MSVC** (Visual Studio 2019/2022) and **MinGW-w64** (gcc). Unlike the
+Unix-like platforms above, there's no single system package manager, so
+Qt, SQLite3 and (optionally) KDE Frameworks each need to be sourced
+separately per toolchain.
+
+One piece of good news either way: unlike Debian/Fedora, the official Qt
+Windows kits (both MSVC and MinGW) **already include the GuiPrivate private
+headers** — there's no separate "private headers" package to remember on
+Windows (see [Qt6 private headers](#7-qt6-private-headers-mandatory) below
+for why this matters).
+
+`QtPdf` is available as an optional component in the Qt Online Installer
+(look for "Qt PDF" under the Qt 6.4+ node); if you skip it, PDF page import
+is silently disabled exactly as on the other platforms. KDE Frameworks are
+not prebuilt for Windows by any of the routes below, so Windows builds
+normally use `-DBUILD_WITH_KF=OFF` (see the
+[autosave caveat](#9-building-without-kde-frameworks)).
+
+### MSVC (Visual Studio 2019 / 2022)
+
+1. Install Visual Studio with the "Desktop development with C++" workload,
+   and install Qt6 for MSVC (e.g. the `msvc2019_64` or `msvc2022_64` kit)
+   via the [Qt Online Installer](https://www.qt.io/download-qt-installer).
+2. Get SQLite3 — the simplest route is [vcpkg](https://vcpkg.io):
+   ```bat
+   vcpkg install sqlite3:x64-windows
+   ```
+3. Configure and build from an "x64 Native Tools Command Prompt for VS":
+   ```bat
+   mkdir build && cd build
+   cmake .. -G "Visual Studio 17 2022" -A x64 ^
+       -DCMAKE_PREFIX_PATH="C:\Qt\6.x.x\msvc2022_64" ^
+       -DCMAKE_TOOLCHAIN_FILE="C:\vcpkg\scripts\buildsystems\vcpkg.cmake" ^
+       -DBUILD_WITH_KF=OFF
+   cmake --build . --config Release --parallel
+   ```
+   Ninja works too, in place of the Visual Studio generator, if you prefer
+   (`-G Ninja -DCMAKE_BUILD_TYPE=Release`, run from the same VS developer
+   prompt so `cl.exe` is on `PATH`).
+
+### MinGW-w64 (gcc)
+
+Two common ways to get a MinGW toolchain that matches a Qt6 MinGW kit: Qt's
+own bundled MinGW (installed alongside a `mingw_64` Qt kit via the Qt
+Online Installer), or [MSYS2](https://www.msys2.org).
+
+Using MSYS2, from a **MINGW64** shell:
+```sh
+pacman -S --needed \
+    mingw-w64-x86_64-toolchain \
+    mingw-w64-x86_64-qt6-base mingw-w64-x86_64-qt6-tools \
+    mingw-w64-x86_64-cmake mingw-w64-x86_64-ninja \
+    mingw-w64-x86_64-sqlite3
+
+mkdir build && cd build
+cmake .. -G Ninja -DBUILD_WITH_KF=OFF -DCMAKE_BUILD_TYPE=Release
+cmake --build .
+```
+(KF6 isn't packaged in MSYS2 either, hence `-DBUILD_WITH_KF=OFF` again.)
+
+Using the Qt Online Installer's bundled MinGW kit instead: point
+`CMAKE_PREFIX_PATH` at that kit (e.g. `C:\Qt\6.x.x\mingw_64`) and make sure
+its bundled `g++.exe` comes first on `PATH`, or pass
+`-DCMAKE_C_COMPILER`/`-DCMAKE_CXX_COMPILER` explicitly so CMake doesn't pick
+up a different MinGW installation. SQLite3 still has to come from elsewhere
+in this path — vcpkg with a `mingw`-flavoured triplet, or MSYS2's package as
+above.
+
+## 7. Qt6 private headers (mandatory)
+
+QET uses the private `QPdfEngine` API (`<private/qpdf_p.h>`) to produce
+clickable hyperlinks in PDF export. This requires Qt's `GuiPrivate` target,
+which on several distributions (notably Debian/Ubuntu) is shipped in a
+separate "private headers" package rather than the normal `-dev` package —
+e.g. `qt6-base-private-dev` on Debian/Ubuntu, or
+`qt6-qtbase-private-devel` on Fedora. Without it, CMake's `find_package`
+step succeeds but configuration later fails at generate time with:
+
+```
+Imported target "Qt6::GuiPrivate" includes non-existent path
+```
+
+If you hit this, install your distribution's Qt6 private-headers package
+(on Windows this is a non-issue — see [Building on
+Windows](#6-building-on-windows-msvc--mingw) above).
+
+## 8. PDF page import (QtPdf)
+
+The toolbar's "Add a PDF" feature (`QPdfDocument::pagePointSize()`) needs
+the separate `QtPdf` Qt module, available since Qt 6.4.
+
+**This is optional and soft-fails**: if `QtPdf` isn't found, or is present
+but older than 6.4, CMake prints a status message and simply disables the
+feature (`QET_HAS_QTPDF` stays `FALSE`) — it does **not** stop the build.
+Some Qt6 distributions don't ship `QtPdf` at all (it lives outside Qt's
+core module set, alongside QtWebEngine), so this is expected on several
+platforms, including FreeBSD as of this writing.
+
+## 9. Building without KDE Frameworks
+
+`BUILD_WITH_KF=OFF` builds QET against a bundled fallback UI layer instead
+of KDE Frameworks (`kcoreaddons`/`kwidgetsaddons`). This is a fully
+supported configuration and is, in practice, the default on platforms where
+KF6 isn't readily packaged (macOS and Windows in particular).
+
+Almost everything works identically either way. The one known caveat:
+**autosave behavior is not as polished without KF**, since QET relies on
+KCoreAddons' autosave/backup-file handling when it's available. Expect
+autosave to work, but less robustly than on a KF-enabled build.
+
+## 10. Translations (developer operation)
+
+Everything in this section is a **maintainer/translator task**, not
+something a normal build or a packager needs to touch.
+
+The `.qm` files shipped with the application are compiled from the tracked
+`.ts` files automatically as part of every normal build (via `lrelease`) —
+regular builds and packages get up-to-date translated UI strings for free,
+with no developer action needed.
+
+Refreshing the `.ts` files themselves from the source code (`lupdate`) is
+the actual developer operation: it's exposed as its own opt-in build
+target, separate from the normal build:
+
+```sh
+cmake --build . --target update_translations
+```
+
+This is **not** run automatically and should not be added to routine or
+parallel CI builds: it rewrites the tracked `.ts` files as a side effect,
+and running it concurrently with the normal `lrelease` compilation step (as
+would happen under `-j`/parallel builds) can corrupt a `.ts` file mid-write,
+causing `lrelease` to fail with "Premature end of document". Run it on its
+own, review the diff, and commit the updated `.ts` files separately.

README

@@ -1,60 +1,60 @@
 [ca]
-QElectroTech és una aplicació Qt5 per crear esquemes elèctrics.
+QElectroTech és una aplicació Qt6 per crear esquemes elèctrics.
 QET utilitza el format XML per als seus elements i esquemes i inclou un editor d'esquemes, un editor d'elements i un editor de caixetins.
 
 [en]
-QElectroTech is a Qt5 application to design electric diagrams.
+QElectroTech is a Qt6 application to design electric diagrams.
 It uses XML files for elements and diagrams, and includes both a diagram editor, a element editor, and an titleblock editor.
 
 [fr]
-QElectroTech est une application Qt5 pour réaliser des schémas électriques.
+QElectroTech est une application Qt6 pour réaliser des schémas électriques.
 QET utilise le format XML pour ses éléments et ses schémas et inclut un éditeur de schémas, un éditeur d'élément, ainsi qu'un editeur de cartouche.
 
 [de]
-QElectroTech ist eine Qt5 Software, um Schaltpläne zu erstellen.
+QElectroTech ist eine Qt6 Software, um Schaltpläne zu erstellen.
 QET benutzt das XML Format für seine Bauteile und seine Projekte, und beinhaltet einen Schaltplaneditor, einen Bauteileditor sowie einen Schriftfeldeditor.
 
 
 [ru]
-QElectroTech - приложение написанное на Qt5 и предназначенное для разработки электрических схем.
+QElectroTech - приложение написанное на Qt6 и предназначенное для разработки электрических схем.
 Оно использует XML-файлы для элементов и схем, и включает, как редактор схем, так и редактор элементов.
 
 [pt]
-QElectroTech é uma aplicação baseada em Qt5 para desenhar esquemas eléctricos.
+QElectroTech é uma aplicação baseada em Qt6 para desenhar esquemas eléctricos.
 QET utiliza ficheiros XML para os elementos e para os esquemas e inclui um editor de esquemas e um editor de elementos.
 
 [es]
-QElectroTech es una aplicación Qt5 para diseñar esquemas eléctricos.
+QElectroTech es una aplicación Qt6 para diseñar esquemas eléctricos.
 Utiliza archivos XML para los elementos y esquemas, e incluye un editor de esquemas y un editor de elementos.
 
 [cs]
-QElectroTech je aplikací Qt5 určenou pro návrh nákresů elektrických obvodů.
+QElectroTech je aplikací Qt6 určenou pro návrh nákresů elektrických obvodů.
 Pro prvky a nákresy používá soubory XML, a zahrnuje v sobě jak editor nákresů, tak editor prvků.
 
 [pl]
-QElectroTech to aplikacja napisana w Qt5, przeznaczona do tworzenia schematów elektrycznych.
+QElectroTech to aplikacja napisana w Qt6, przeznaczona do tworzenia schematów elektrycznych.
 Wykorzystuje XML do zapisywania plików elementów i projektów. Posiada edytor schematów i elementów.
 
 [it]
-QElectroTech è una applicazione fatta in Qt5 per disegnare schemi elettrici.
+QElectroTech è una applicazione fatta in Qt6 per disegnare schemi elettrici.
 QET usa il formato XML per i suoi elementi e schemi, includendo anche un editor per gli stessi.
 
 [el]
-Το QElectroTech είναι μια εφαρμογή Qt5 για σχεδίαση ηλεκτρικών διαγραμμάτων.
+Το QElectroTech είναι μια εφαρμογή Qt6 για σχεδίαση ηλεκτρικών διαγραμμάτων.
 Χρησιμοποιεί αρχεία XML για στοιχεία και διαγράμματα, και περιλαμβάνει επεξεργαστή διαγραμμάτων καθώς και επεξεργαστή στοιχείων.
 
 [nl]
-QElectroTech is een Qt5 applicatie om elektrische schema's te ontwerpen.
+QElectroTech is een Qt6 applicatie om elektrische schema's te ontwerpen.
 Het maakt gebruik van XML-bestanden voor elementen en diagrammen, en omvat zowel een diagram bewerker, een element bewerker, en een bloksjabloon bewerker.
 
 [be]
-QElectroTech is een Qt5 toepassing voor het maken en beheren van elektrische schema's.
+QElectroTech is een Qt6 toepassing voor het maken en beheren van elektrische schema's.
 QET gebruikt XML voor de elementen en schema's en omvat een schematische editor, itemeditor, en een titel sjabloon editor.
 
 [da]
-QElectroTech er et Qt5 program til at redigere elektriske diagrammer.
+QElectroTech er et Qt6 program til at redigere elektriske diagrammer.
 Det bruger XML filer for symboler og diagrammer og inkluderer diagram, symbol og titelblok redigering.
 
 [ja]
-QElectroTech は電気回路図を作成する Qt5 アプリケーションです。
+QElectroTech は電気回路図を作成する Qt6 アプリケーションです。
 QET は要素と回路図に XML 形式を利用し、回路図エディタ、要素エディタ、表題欄エディタを含みます。

README.md

@@ -5,9 +5,9 @@
 
 ### What it is
 
-QElectroTech, or QET in short, is a libre and open source desktop application to create diagrams and schematics.  
-The software is primarily intended to create electrical documentation but it can also be used to draw any kinds of diagrams, such as those made in pneumatics, hydraulics, process industries, electronics...  
-Generally speaking, QET is a **CAD/CAE editor focusing on schematics drawing features**.  
+QElectroTech, or QET in short, is a libre and open source desktop application to create diagrams and schematics.
+The software is primarily intended to create electrical documentation but it can also be used to draw any kinds of diagrams, such as those made in pneumatics, hydraulics, process industries, electronics...
+Generally speaking, QET is a **CAD/CAE editor focusing on schematics drawing features**.
 
 This means that there are no embedded simulating or calculating functionalities and it is not planned to implement them.
 
@@ -24,7 +24,7 @@ Users who want to test and take benefits from the last software implementations
 
 ### License
 
-The software is licensed under [GNU/GPL](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).  
+The software is licensed under [GNU/GPL](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
 You are free to use, copy, modify and redistribute it under the terms of the license.
 
 Like many other open source software, QElectroTech is provided as is, without any warranty.
@@ -40,16 +40,16 @@ git clone --recursive https://github.com/qelectrotech/qelectrotech-source-mirror
 Here are the technical choices made for the software development:
 
 *   Integrated development environment: [Qt Framework](https://www.qt.io/ide/)
-*   Libraries: Qt 5.x
-*   [KF5 Framework](https://github.com/KDE)  
-    [Cmake](https://cmake.org/install/)   
-    [kcoreaddons](https://github.com/KDE/kcoreaddons/tree/kf5)   
-    [kwidgetsaddons](https://github.com/KDE/kwidgetsaddons/tree/kf5).  
+*   Libraries: Qt 6.x
+*   [KF6 Framework](https://github.com/KDE)
+    [Cmake](https://cmake.org/install/)
+    [kcoreaddons](https://github.com/KDE/kcoreaddons/tree/kf6)
+    [kwidgetsaddons](https://github.com/KDE/kwidgetsaddons/tree/kf6).
 *   Coding language: [C++](https://en.wikipedia.org/wiki/C%2B%2B)
-*   GUI translations: [Qt Linguist](http://doc.qt.io/qt-5/qtlinguist-index.html)
+*   GUI translations: [Qt Linguist](http://doc.qt.io/qt-6/qtlinguist-index.html)
 *   Version control: [GIT](https://github.com/qelectrotech/qelectrotech-source-mirror.git)
-*   Doxygen documentation :[Doxygen](https://qelectrotech.github.io/qelectrotech-source-mirror/)
-*   QtCreator qch doxygen :[QElectroTech.qch](https://github.com/qelectrotech/qelectrotech-source-mirror/blob/master/doc/QElectroTech.qch)
+*   Doxygen documentation :[Doxygen](https://download.qelectrotech.org/qet/doxygen/html/)
+*   QtCreator qch doxygen :[QElectroTech.qch](https://download.qelectrotech.org/qet/doxygen/QElectroTech.qch)
 *   File format for projects, elements and titleblocks: [XML](http://www.w3schools.com/xml/xml_whatis.asp)
 *   Main development platform: [GNU/Linux](http://getgnulinux.org/en/linux/)
 *   Targeted platforms: Windows, GNU/Linux, Mac OS X, BSDs
@@ -62,20 +62,20 @@ If you wish to be informed of the latest developments, browse the [archive](http
 
 # Features
 
-QElectroTech is a free and open source software.  
-No need to worry about restrictive licensing, privacy violation or dependency on a company.  
-Zero cost and no licensing fees!  
+QElectroTech is a free and open source software.
+No need to worry about restrictive licensing, privacy violation or dependency on a company.
+Zero cost and no licensing fees!
 But you are welcome to make a donation to support the development
 
-QElectroTech runs on the 3 most widespread operating systems for desktop computers in the world.  
-Files that were created on an OS can be edited on another OS without any conversion or restriction.  
+QElectroTech runs on the 3 most widespread operating systems for desktop computers in the world.
+Files that were created on an OS can be edited on another OS without any conversion or restriction.
 MS Windows users can even run the "ready-to-use" version of QElectroTech from an external medium with no need to install it on an access restricted computer.
 
 
 Take advantage of the modern GUI
 
-Toolbars and panels can be enabled/disabled, moved and displayed the way you want to work.  
-Panels can be stacked on each other (as tabs) or docked on the sides (as docks) or completely separated from the main window (as windows).  
+Toolbars and panels can be enabled/disabled, moved and displayed the way you want to work.
+Panels can be stacked on each other (as tabs) or docked on the sides (as docks) or completely separated from the main window (as windows).
 The GUI can fit to small or big screens, and even to multi-display configurations.
 ![](https://download.qelectrotech.org/qet/images-features/0030.png "GUI overview")
 
@@ -86,31 +86,31 @@ You only need to restart the application for the new selected language to take e
 
 Create technical documentation in professional quality
 
-Size, look and informations of the folios (sheets) are fully configurable.  
+Size, look and informations of the folios (sheets) are fully configurable.
 You can set vertical and horizontal headers (printed rulers) individually on and off, set number of columns and rows, and set width/height of each column/row.
 
-Titlebocks can be created and edited with the embedded titleblock editor to perfectly suit your needs.  
+Titlebocks can be created and edited with the embedded titleblock editor to perfectly suit your needs.
 Custom variables can be defined to display the informations you wish in the titleblock.
 ![](https://download.qelectrotech.org/qet/images-features/0055.png "Titleblock editor")
 
-With only 2 mouse clicks you can add a full automatic generated table of content.  
+With only 2 mouse clicks you can add a full automatic generated table of content.
 Changes in the documentation are updated on the fly.
 ![](https://download.qelectrotech.org/qet/images-features/0060.png "Table of content")
 
 Choose from more than 8.200 symbols...
-The embedded QET collection contains a rich library of electric, logic, pneumatic, hydraulic and fluid symbols.  
+The embedded QET collection contains a rich library of electric, logic, pneumatic, hydraulic and fluid symbols.
 The library grows at every new release thanks to an active user community.
 ![](https://download.qelectrotech.org/qet/images-features/0070.png "Collections")
 
 ...or create your own collection
 
-The embedded element editor is a nice tool to create your own elements (symbols or anything else).  
+The embedded element editor is a nice tool to create your own elements (symbols or anything else).
 Your own elements are stored in the user collection.
 ![](https://download.qelectrotech.org/qet/images-features/0080.png "Element editor")
 
 Quickly find what you need
 
-All collections can quickly be searched with the integrated search engine.  
+All collections can quickly be searched with the integrated search engine.
 Furthermore, the search request can be restricted to the folder of your choice.
 ![](https://download.qelectrotech.org/qet/images-features/0090.png "Search engine")
 
@@ -128,7 +128,7 @@ And of course, you can accurately zoom with the mouse wheel over the drawing are
 
 Link elements together to create cross references
 
-Several types of element can be linked together to display a cross reference text.  
+Several types of element can be linked together to display a cross reference text.
 All types of cross references are automatically updated on the fly, you don't need to think about them if you make changes.
 ![](https://download.qelectrotech.org/qet/images-features/0112.png "Cross ref elements")
 To speed up your work, linkable elements are easily searched and shown.
@@ -143,7 +143,7 @@ This way, you can make your own parts list or bill of material using the full po
 ![](https://download.qelectrotech.org/qet/images-features/0125.png "Spreadsheet")
 Print to pdf and/or export your work to images
 
-Your whole documentation or only selected parts of it can be printed to a real printer or to a pdf file.  
+Your whole documentation or only selected parts of it can be printed to a real printer or to a pdf file.
 Alternatively, you can export to vector (svg) or pixel (png, jpg, bmp) format images.
 
 ### And much more:
@@ -161,44 +161,44 @@ Alternatively, you can export to vector (svg) or pixel (png, jpg, bmp) format im
 Nomenclature
 
 A new nomenclature tool appears in the menu: project -> Add a nomenclature.
-The nomenclature is presented in the form of a configurable table separated into two parts: the display (the form) and the content (the background).  
-- Display: the size and position of the table, the margins between text and the table cell, the alignment of the text in the cells and the font. The configuration of the table headers and the table itself are separate.  
-- Content: the information to display in the table and the order in which it should be displayed.  
+The nomenclature is presented in the form of a configurable table separated into two parts: the display (the form) and the content (the background).
+- Display: the size and position of the table, the margins between text and the table cell, the alignment of the text in the cells and the font. The configuration of the table headers and the table itself are separate.
+- Content: the information to display in the table and the order in which it should be displayed.
 
 ![](https://download.qelectrotech.org/qet/images_depeche_linuxfr/08/dialogue_nomenclature.png "nomenclature dialogue")
 
-In order to speed up the establishment of a nomenclature, it is possible to export / import the display and content configurations separately. This is the "Configuration" part that can be seen in the photos above.  
+In order to speed up the establishment of a nomenclature, it is possible to export / import the display and content configurations separately. This is the "Configuration" part that can be seen in the photos above.
 
-Behind the scenes, an SQLite database does the work, so setting up the content is nothing more or less than an SQL query created using a dialog (screenshot by right).  
-The SQL query is configured as follows (from top to bottom in the screenshot):  
-- “Available information”: the information to display;  
-- "Filter": filter the information (is not empty, is empty, contains, does not contain, is equal to, is not equal to) only one filter can be applied per information, it is not possible combine several;  
-- "Type of elements": allows you to filter on what type of element you want to obtain information.  
+Behind the scenes, an SQLite database does the work, so setting up the content is nothing more or less than an SQL query created using a dialog (screenshot by right).
+The SQL query is configured as follows (from top to bottom in the screenshot):
+- “Available information”: the information to display;
+- "Filter": filter the information (is not empty, is empty, contains, does not contain, is equal to, is not equal to) only one filter can be applied per information, it is not possible combine several;
+- "Type of elements": allows you to filter on what type of element you want to obtain information.
 
-At the bottom, a checkmark "SQL query" allows you to edit a personalized query, if the basic options are not sufficient.  
+At the bottom, a checkmark "SQL query" allows you to edit a personalized query, if the basic options are not sufficient.
 
-When a nomenclature is too large to be contained in a single folio, it is possible to separate it on several folios, the tables of each folio are then linked together. When creating a nomenclature, this option is activated by default, which has the effect of adding the necessary number of folios, adding a table in each of them and linking them together.  
+When a nomenclature is too large to be contained in a single folio, it is possible to separate it on several folios, the tables of each folio are then linked together. When creating a nomenclature, this option is activated by default, which has the effect of adding the necessary number of folios, adding a table in each of them and linking them together.
 
-Finally two buttons are available in the property panel:    
-- "Fit the table to the folio": positions and adjusts the size and determines the number of rows in the table in relation to the folio;  
-- "Apply geometry to all tables linked to this one": applies the three properties mentioned above to all linked tables in order to save time and maintain aesthetic consistency.  
+Finally two buttons are available in the property panel:
+- "Fit the table to the folio": positions and adjusts the size and determines the number of rows in the table in relation to the folio;
+- "Apply geometry to all tables linked to this one": applies the three properties mentioned above to all linked tables in order to save time and maintain aesthetic consistency.
 
-And to finish a table   
+And to finish a table
 ![](https://download.qelectrotech.org/qet/images_depeche_linuxfr/08/tableau.png "table")
 
 
 Summary
 
-The old summary has been completely removed from the code in order to make room for the new one which is exactly the same as the nomenclature (a large amount of the code is common), with the exception of the SQL query (and its dialog to configure it) which offers specific information for editing a summary.  
+The old summary has been completely removed from the code in order to make room for the new one which is exactly the same as the nomenclature (a large amount of the code is common), with the exception of the SQL query (and its dialog to configure it) which offers specific information for editing a summary.
 
-Export of the internal database  
+Export of the internal database
 
-The database used by the nomenclature and the summary can be exported in a “.sqlite” file.  
-Currently this is irrelevant, as the function was created during development for debugging purposes, we left it.  
-Note that the database will become increasingly important in the future of Qet.  
+The database used by the nomenclature and the summary can be exported in a “.sqlite” file.
+Currently this is irrelevant, as the function was created during development for debugging purposes, we left it.
+Note that the database will become increasingly important in the future of Qet.
 
 
-Export of the wiring list  
+Export of the wiring list
 
 In order to be able to use the wiring number printers more easily, the names of conductors can be exported in CSV format, the export respects the quantity of conductors in order to print the right quantity of numbers, for example a potential numbered 240 composed of 3 wires will give 6 × 240 (2 numbers per wire × 3 wires) in the CSV. 
 
@@ -206,13 +206,13 @@ In order to be able to use the wiring number printers more easily, the names of
 
 ### Story
 
-The QElectroTech project was founded in 2007 by two french students, Xavier and Benoit.  
-Xavier developed the base application itself and made all technical choices about the development.  
-The first version of QET (0.1) was released on 09.03.2008.  
+The QElectroTech project was founded in 2007 by two french students, Xavier and Benoit.
+Xavier developed the base application itself and made all technical choices about the development.
+The first version of QET (0.1) was released on 09.03.2008.
 However, both Xavier and Benoit do not participate anymore in the project since 2013.
 
-Following this period, new developers and contributors took over the project and kept it alive.  
-The development and the many translations are actively maintained.  
+Following this period, new developers and contributors took over the project and kept it alive.
+The development and the many translations are actively maintained.
 New functionalities and evolutions are planned to make QET ever better.
 
 Nowadays, QET is not only used by many individuals, teachers and students but also by professional electricians and companies all over the world.

build-aux/flatpak/org.qelectrotech.QElectroTech.json

@@ -1,8 +1,10 @@
 {
   "id": "org.qelectrotech.QElectroTech",
   "runtime": "org.kde.Platform",
-  "runtime-version": "5.15-25.08",
+  "runtime-version": "6.11",
   "sdk": "org.kde.Sdk",
+  "base": "io.qt.qtwebengine.BaseApp",
+  "base-version": "6.11",
   "command": "qelectrotech",
   "rename-desktop-file": "org.qelectrotech.qelectrotech.desktop",
   "rename-appdata-file": "qelectrotech.appdata.xml",
@@ -25,12 +27,26 @@
       "*.la",
       "*.a"
   ],
+  "cleanup-commands": [
+    "/app/cleanup-BaseApp.sh"
+  ],
   "modules": [
     "tkinter.json",
     "pypi-dependencies.json",
     {
       "name": "qelectrotech",
-      "buildsystem": "qmake",
+      "buildsystem": "cmake",
+      "config-opts": [
+        "-DCMAKE_INSTALL_PREFIX=/app",
+        "-DQT_VERSION_MAJOR=6",
+        "-DBUILD_WITH_KF=ON",
+        "-DBUILD_KF=OFF",
+        "-DPACKAGE_TESTS=OFF",
+        "-DBUILD_PUGIXML=ON",
+        "-DFETCHCONTENT_FULLY_DISCONNECTED=ON",
+        "-DFETCHCONTENT_SOURCE_DIR_PUGIXML=/run/build/qelectrotech/pugixml",
+        "-DQET_EXPORT_PROJECT_DB=ON"
+      ],
       "post-install": [
         "mv ${FLATPAK_DEST}/share/mime/packages/qelectrotech.xml ${FLATPAK_DEST}/share/mime/packages/org.qelectrotech.QElectroTech.xml"
       ],
@@ -38,12 +54,6 @@
         {
           "type": "dir",
           "path": "../.."
-        },
-        {
-          "type": "patch",
-          "paths": [
-            "patches/fix-the-installation-paths.patch"
-          ]
         }
       ]
     }

build-aux/generate-page.py

@@ -0,0 +1,168 @@
+#!/usr/bin/env python3
+"""
+generate-page.py — Generates gh-pages/index.html for QElectroTech nightly builds.
+Called from windows-msi.yml deploy-pages job.
+
+Environment variables required:
+  DATE, SHORT, REPO, SHA, RUN_URL, RUN_NUMBER,
+  INSTALLER_URL, PORTABLE_URL, MSI_URL (optional)
+
+Optional (frozen Qt5 legacy build — omitted entirely if empty):
+  LEGACY_INSTALLER_URL, LEGACY_PORTABLE_URL, LEGACY_MSI_URL
+
+NOTE: Windows Qt5 CI build removed (Qt6 is now the sole track built and
+signed going forward). INSTALLER_URL / PORTABLE_URL / MSI_URL point to the
+Qt6 build artifacts. The LEGACY_* variables, when set, point to the last
+Qt5 nightly assets that were ever published — kept downloadable but frozen
+(windows-build.yml no longer regenerates or deletes them).
+"""
+import os
+
+date         = os.environ.get("DATE", "")
+short        = os.environ.get("SHORT", "")
+repo         = os.environ.get("REPO", "")
+sha          = os.environ.get("SHA", "")
+run_url      = os.environ.get("RUN_URL", "")
+run_number   = os.environ.get("RUN_NUMBER", "")
+installer_url = os.environ.get("INSTALLER_URL", "")
+portable_url  = os.environ.get("PORTABLE_URL", "")
+msi_url       = os.environ.get("MSI_URL", "")
+
+legacy_installer_url = os.environ.get("LEGACY_INSTALLER_URL", "")
+legacy_portable_url  = os.environ.get("LEGACY_PORTABLE_URL", "")
+legacy_msi_url       = os.environ.get("LEGACY_MSI_URL", "")
+
+msi_block = ""
+if msi_url:
+    msi_block = f"""
+<a class="btn btn-msi" href="{msi_url}">
+<span class="btn-icon">&#11015;</span>
+<span class="btn-text">Windows Installer .msi<small>.msi &mdash; for enterprise / GPO deployment</small></span>
+</a>"""
+
+# Legacy Qt5 section — only rendered if at least one legacy asset exists.
+legacy_block = ""
+if legacy_installer_url or legacy_portable_url or legacy_msi_url:
+    legacy_installer_btn = ""
+    if legacy_installer_url:
+        legacy_installer_btn = f"""
+<a class="btn btn-secondary" href="{legacy_installer_url}">
+<span class="btn-icon">&#11015;</span>
+<span class="btn-text">Windows Installer (Qt5, legacy)<small>.exe &mdash; frozen, no longer updated</small></span>
+</a>"""
+    legacy_msi_btn = ""
+    if legacy_msi_url:
+        legacy_msi_btn = f"""
+<a class="btn btn-secondary" href="{legacy_msi_url}">
+<span class="btn-icon">&#11015;</span>
+<span class="btn-text">Windows Installer .msi (Qt5, legacy)<small>.msi &mdash; frozen, no longer updated</small></span>
+</a>"""
+    legacy_portable_btn = ""
+    if legacy_portable_url:
+        legacy_portable_btn = f"""
+<a class="btn btn-secondary" href="{legacy_portable_url}">
+<span class="btn-icon">&#128230;</span>
+<span class="btn-text">Windows Portable (Qt5, legacy)<small>.zip &mdash; frozen, no longer updated</small></span>
+</a>"""
+
+    legacy_block = f"""
+<div class="card">
+<h2>&#128451; Windows &mdash; x86_64 &mdash; Qt5 (legacy, unmaintained)</h2>
+<div class="warning">
+&#128451; <strong>Legacy build &mdash; frozen, no longer updated.</strong> This is the
+last Qt5 build published before Windows CI switched to Qt6 only. Kept available for
+anyone who still needs it, but it will not receive further fixes or security updates.
+Please migrate to the Qt6 build above when you can.
+</div>
+<div class="downloads">
+{legacy_installer_btn}
+{legacy_msi_btn}
+{legacy_portable_btn}
+</div>
+</div>"""
+
+html = f"""<!DOCTYPE html>
+<html lang="en">
+<head>
+<meta charset="UTF-8">
+<meta name="viewport" content="width=device-width, initial-scale=1.0">
+<title>QElectroTech &ndash; Nightly Builds</title>
+<style>
+*,*::before,*::after{{box-sizing:border-box;margin:0;padding:0}}
+body{{font-family:-apple-system,BlinkMacSystemFont,"Segoe UI",Roboto,sans-serif;background:#f0f4f8;color:#2d3748;min-height:100vh}}
+header{{background:linear-gradient(135deg,#1a365d 0%,#2b6cb0 100%);color:white;padding:48px 24px 40px;text-align:center}}
+header h1{{font-size:2.2em;letter-spacing:-0.5px;margin-bottom:8px}}
+header p{{opacity:.8;font-size:1.05em}}
+main{{max-width:680px;margin:40px auto;padding:0 20px 60px}}
+.card{{background:white;border-radius:12px;padding:28px;margin-bottom:24px;box-shadow:0 2px 12px rgba(0,0,0,.08)}}
+.card h2{{font-size:1em;text-transform:uppercase;letter-spacing:.06em;color:#718096;margin-bottom:16px}}
+.meta{{font-size:.875em;color:#4a5568;line-height:1.8;margin-bottom:20px}}
+.meta a{{color:#2b6cb0;text-decoration:none}}
+.meta a:hover{{text-decoration:underline}}
+.badge{{display:inline-block;background:#ebf8ff;color:#2b6cb0;border-radius:4px;font-size:.8em;font-weight:600;padding:2px 8px;margin-left:6px;vertical-align:middle}}
+.warning{{background:#fffbeb;border-left:4px solid #f6ad55;border-radius:4px;padding:12px 16px;font-size:.875em;color:#744210;margin-bottom:24px;line-height:1.5}}
+.warning a{{color:#c05621}}
+.downloads{{display:flex;flex-direction:column;gap:12px}}
+.btn{{display:flex;align-items:center;gap:12px;padding:14px 20px;border-radius:8px;font-size:.95em;font-weight:600;text-decoration:none;transition:transform .1s,box-shadow .1s}}
+.btn:hover{{transform:translateY(-1px);box-shadow:0 4px 12px rgba(0,0,0,.15)}}
+.btn-primary{{background:#2b6cb0;color:white}}
+.btn-msi{{background:#6b46c1;color:white}}
+.btn-secondary{{background:#edf2f7;color:#2d3748}}
+.btn-icon{{font-size:1.3em}}
+.btn-text small{{display:block;font-weight:400;font-size:.8em;opacity:.75;margin-top:1px}}
+footer{{text-align:center;font-size:.8em;color:#a0aec0;padding:32px 0 0}}
+footer a{{color:#718096;text-decoration:none}}
+</style>
+</head>
+<body>
+<header>
+<h1>&#9889; QElectroTech</h1>
+<p>Nightly Windows Builds</p>
+</header>
+<main>
+<div class="card">
+<h2>Build info</h2>
+<div class="meta">
+&#128197; &nbsp;<strong>{date}</strong><br>
+&#128256; &nbsp;Commit <a href="https://github.com/{repo}/commit/{sha}"><code>{short}</code></a><br>
+&#128295; &nbsp;<a href="{run_url}">CI Run #{run_number}</a>
+<span class="badge">nightly</span>
+</div>
+<div class="warning">
+&#9888;&#65039; This is a development version; it introduces new features you want,
+but may cause bugs that have not yet been identified yet in <code>master</code>.
+For production use, download a <a href="https://github.com/{repo}/releases">stable release</a>.
+</div>
+</div>
+<div class="card">
+<h2>&#127993; Windows &mdash; x86_64</h2>
+<div class="downloads">
+<a class="btn btn-primary" href="{installer_url}">
+<span class="btn-icon">&#11015;</span>
+<span class="btn-text">Windows Installer<small>.exe &mdash; recommended, includes all dependencies</small></span>
+</a>
+{msi_block}
+<a class="btn btn-secondary" href="{portable_url}">
+<span class="btn-icon">&#128230;</span>
+<span class="btn-text">Windows Portable<small>.zip &mdash; no installation required, extract and run &quot;Lancer QET.bat&quot;</small></span>
+</a>
+<a class="btn btn-secondary" href="https://github.com/{repo}/releases/tag/nightly">
+<span class="btn-icon">&#128230;</span>
+<span class="btn-text">All nightly files on GitHub<small>Release page with checksums</small></span>
+</a>
+</div>
+</div>
+{legacy_block}
+</main>
+<footer>
+Auto-generated by GitHub Actions &nbsp;&middot;&nbsp;
+<a href="https://github.com/{repo}">Source on GitHub</a> &nbsp;&middot;&nbsp;
+<a href="https://qelectrotech.org">qelectrotech.org</a>
+</footer>
+</body>
+</html>"""
+
+os.makedirs("gh-pages", exist_ok=True)
+with open("gh-pages/index.html", "w", encoding="utf-8") as f:
+    f.write(html)
+print("index.html written OK")

build-aux/snap/snapcraft.yaml

@@ -1,48 +1,39 @@
 name: qelectrotech
 title: QElectroTech
-base: core22
+base: core24
 adopt-info: qelectrotech
 license: GPL-2.0
 summary: Electrical diagram editor
 description: |
-  QElectroTech, or QET in short, is a libre and open source desktop application 
+  QElectroTech, or QET in short, is a libre and open source desktop application
   to create diagrams and schematics.
-
 grade: stable
 confinement: strict
 compression: lzo
 
-architectures:
-  - build-on: amd64
-    build-for: amd64
-  - build-on: arm64
-    build-for: arm64
-    
-layout:
-  /usr/local/share/qelectrotech:
-    symlink: $SNAP/usr/local/share/qelectrotech
-  
+platforms:
+  amd64:
+  arm64:
 
 apps:
   qelectrotech:
-    command: usr/local/bin/qelectrotech
+    command: usr/bin/qelectrotech
     common-id: qelectrotech.desktop
-    extensions: 
-     - kde-neon
+    extensions:
+      - kde-neon-6
     plugs: &plugs [opengl, unity7, home, removable-media, gsettings, network, cups-control, wayland, x11]
     environment: &env
       TCL_LIBRARY: $SNAP/usr/share/tcltk/tcl8.6
       HOME: $SNAP_USER_COMMON
-      PYTHONPATH: $SNAP:$SNAP/lib/python3.10/site-packages:$SNAP/usr/lib/python3.10:$SNAP/usr/lib/python3.10/lib-dynload
+      PYTHONPATH: $SNAP:$SNAP/lib/python3.12/site-packages:$SNAP/usr/lib/python3.12:$SNAP/usr/lib/python3.12/lib-dynload
 
   qet-tb-generator:
     command: bin/qet_tb_generator
-    extensions: 
-     - kde-neon
+    extensions:
+      - kde-neon-6
     plugs: *plugs
     environment: *env
-      
-  
+
 parts:
   launchers:
     plugin: dump
@@ -53,8 +44,9 @@ parts:
   qet-tb-generator:
     plugin: python
     source: https://github.com/raulroda/qet_tb_generator-plugin.git
+    source-tag: v1.31
     python-packages: [PySimpleGUI]
-    stage-packages: 
+    stage-packages:
       - python3-lxml
       - python3-tk
       - libtk8.6
@@ -62,46 +54,74 @@ parts:
   kde-sdk-setup:
     plugin: nil
     build-snaps:
-      - kf5-5-110-qt-5-15-11-core22-sdk
+      - kf6-core24-sdk
+      - kde-qt6-core24-sdk
     build-packages:
       - g++
       - mesa-common-dev
       - libglvnd-dev
       - rsync
     override-build: |
-      rsync -a --ignore-existing /snap/kf5-5-110-qt-5-15-11-core22-sdk/current/ /
+      rsync -a --ignore-existing /snap/kf6-core24-sdk/current/ /
+      rsync -a --ignore-existing /snap/kde-qt6-core24-sdk/current/ /
 
-  
   qelectrotech:
     after: [kde-sdk-setup]
     plugin: nil
     source: .
-    stage-packages: [ git, sqlite3, xdg-user-dirs ]
+    stage-packages:
+      - git
+      - sqlite3
+      - xdg-user-dirs
+      - libqt6qml6
+      # libxcb-cursor0 workaround was needed against the Qt5/KF5 core22 content
+      # snap (issue #373). Not yet re-verified against kf6-core24 — remove this
+      # if the Qt6 xcb platform plugin loads cleanly without it.
+      - libxcb-cursor0
     build-packages:
       - git
+      - cmake
+      - ninja-build
       - libsqlite3-dev
+      - qt6-tools-dev
+      - qt6-base-private-dev
+      - qt6-declarative-dev
+      - pkgconf
+      # Qt6 PrintSupport records Cups::Cups as a third-party dependency
+      # (qprint_p.h includes <cups/ppd.h>), so find_package(Qt6 PrintSupport)
+      # runs FindCups at configure time and fails without the CUPS headers.
+      # Build-time only: nothing from it is staged into the snap.
+      - libcups2-dev
     override-build: |
       displayed_version=$(cat sources/qetversion.cpp | grep "return QVersionNumber{"| head -n 1| awk -F "{" '{ print $2 }' | awk -F "}" '{ print $1 }' | sed -e 's/,/./g' -e 's/ //g')
       snap_version="${displayed_version}-g$(git rev-parse --short=8 HEAD)"
       modified_displayed_version="${snap_version}.snap"
       sed -i -E "s|const QString displayedVersion =.*|const QString displayedVersion =\"$modified_displayed_version\";|" sources/qet.h
       craftctl set version="$snap_version"
-      qmake "$CRAFT_PART_SRC/qelectrotech.pro"
-      make -j${CRAFT_PARALLEL_BUILD_COUNT}
-      make install INSTALL_ROOT="$CRAFT_PART_INSTALL"
+      cmake -G Ninja -B build -S "$CRAFT_PART_SRC" \
+        -DCMAKE_INSTALL_PREFIX=/usr \
+        -DCMAKE_BUILD_TYPE=Release \
+        -DQT_VERSION_MAJOR=6 \
+        -DBUILD_WITH_KF=ON \
+        -DBUILD_KF=OFF \
+        -DPACKAGE_TESTS=OFF \
+        -DBUILD_PUGIXML=ON \
+        -DQET_EXPORT_PROJECT_DB=ON
+      ninja -C build -j${CRAFT_PARALLEL_BUILD_COUNT}
+      DESTDIR="$CRAFT_PART_INSTALL" ninja -C build install
     override-stage: |
       craftctl default
       # patch desktop file with correct icon path
-      SED_CMD="sed -i -E s|^Icon=(.*)|Icon=\${SNAP}/usr/local/share/icons/hicolor/128x128/apps/\1.png|g" 
-      $SED_CMD usr/local/share/applications/org.qelectrotech.qelectrotech.desktop
+      SED_CMD="sed -i -E s|^Icon=(.*)|Icon=\${SNAP}/usr/share/icons/hicolor/128x128/apps/\1.png|g"
+      $SED_CMD usr/share/applications/org.qelectrotech.qelectrotech.desktop
 
   cleanup:
     after: [qelectrotech, qet-tb-generator]
     plugin: nil
-    build-snaps: [kf5-5-110-qt-5-15-11-core22]
+    build-snaps: [kf6-core24]
     override-prime: |
       set -eux
-      for snap in "kf5-5-110-qt-5-15-11-core22"; do  # List all content-snaps you're using here
+      for snap in "kf6-core24"; do # List all content-snaps you're using here
         cd "/snap/$snap/current" && find . -type f,l -exec rm -f "$CRAFT_PRIME/{}" "$CRAFT_PRIME/usr/{}" \;
       done
       for cruft in bug lintian man; do

build-aux/windows/Lancer QET.bat

@@ -10,5 +10,5 @@ rem "C:/Users/<USER>/AppData/Local/QElectroTech/QElectroTech"
 rem Sans l'option --data-dir, les données utilisateur (elements, titleblocks,
 rem log, ...) de QElectroTech sont stockées dans
 rem "C:/Users/<USER>/AppData/Roaming/QElectroTech/QElectroTech"
-set command=bin\qelectrotech.exe --common-elements-dir=elements/ --common-tbt-dir=titleblocks/ --lang-dir=lang/ -style windowsvista %*
+set command=bin\qelectrotech.exe --common-elements-dir=elements/ --common-tbt-dir=titleblocks/ --lang-dir=lang/ -platform windows:fontengine=freetype %*
 @start %command%

build-aux/windows/QElectroTech.wxs

@@ -0,0 +1,169 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  QElectroTech.wxs - WiX v7 installer definition
+  Generates a self-contained x64 MSI for QElectroTech (MSYS2/UCRT64 build).
+
+  Variables passed from the wix build command line:
+    -d FilesDir=<absolute path to artifact\files>
+    -d Version=<numeric version e.g. 0.100.1.0>
+    -d ProductVersion=<display version e.g. 0.100.1-r8770-abc1234_x86_64-win64>
+    -d LicenseRtf=<absolute path to License.rtf>
+-->
+<Wix xmlns="http://wixtoolset.org/schemas/v4/wxs"
+     xmlns:ui="http://wixtoolset.org/schemas/v4/wxs/ui">
+  <?ifndef QtPlatformArgs ?>
+  <?define QtPlatformArgs="" ?>
+  <?endif?>
+
+  <Package
+    Name="QElectroTech"
+    Manufacturer="QElectroTech Team"
+    Version="$(var.Version)"
+    ProductCode="$(var.ProductCode)"
+    UpgradeCode="A1B2C3D4-E5F6-7890-ABCD-EF1234567890"
+    Language="1033"
+    Codepage="1252"
+    InstallerVersion="500"
+    Scope="perMachine">
+
+    <!-- Embed all cabinet files inside the MSI (self-contained installer) -->
+    <MediaTemplate EmbedCab="yes" CompressionLevel="high" />
+
+    <!-- In-place upgrade: automatically uninstalls the previous version -->
+    <MajorUpgrade
+      DowngradeErrorMessage="A newer version of QElectroTech is already installed."
+      AllowSameVersionUpgrades="yes"
+      Schedule="afterInstallInitialize" />
+
+    <!-- Installation directory -->
+    <StandardDirectory Id="ProgramFiles64Folder">
+      <Directory Id="INSTALLDIR" Name="QElectroTech" />
+    </StandardDirectory>
+
+    <!-- ============================================================
+         All application files harvested in one pass from files\**
+         (Lancer QET.bat has been removed from the artifact before
+          this build — see windows-msi.yml step "Remove Lancer QET.bat")
+         ============================================================ -->
+    <ComponentGroup Id="CG_AllFiles" Directory="INSTALLDIR">
+      <Files Include="$(var.FilesDir)\**" />
+    </ComponentGroup>
+
+    <!-- ============================================================
+         Desktop + Start Menu shortcuts
+         Point directly to qelectrotech.exe with all required arguments.
+         No .bat wrapper needed.
+         ============================================================ -->
+    <ComponentGroup Id="CG_Shortcuts" Directory="INSTALLDIR">
+
+      <Component Id="C_ShortcutDesktop" Guid="F1A2B3C4-D5E6-7890-5678-012345678901">
+        <Shortcut Id="DesktopShortcut"
+                  Directory="DesktopFolder"
+                  Name="QElectroTech"
+                  Target="[INSTALLDIR]bin\qelectrotech.exe"
+                  Arguments="--common-elements-dir=&quot;[INSTALLDIR]elements/&quot; --common-tbt-dir=&quot;[INSTALLDIR]titleblocks/&quot; --lang-dir=&quot;[INSTALLDIR]lang/&quot; $(var.QtPlatformArgs)"
+                  Icon="qet.ico"
+                  WorkingDirectory="INSTALLDIR" />
+        <RegistryValue Root="HKCU"
+                       Key="Software\QElectroTech"
+                       Name="DesktopShortcut"
+                       Type="integer" Value="1"
+                       KeyPath="yes" />
+      </Component>
+
+      <Component Id="C_ShortcutStartMenu" Guid="A2B3C4D5-E6F7-8901-6789-123456789012">
+        <Shortcut Id="StartMenuShortcut"
+                  Directory="ProgramMenuFolder"
+                  Name="QElectroTech"
+                  Target="[INSTALLDIR]bin\qelectrotech.exe"
+                  Arguments="--common-elements-dir=&quot;[INSTALLDIR]elements/&quot; --common-tbt-dir=&quot;[INSTALLDIR]titleblocks/&quot; --lang-dir=&quot;[INSTALLDIR]lang/&quot; $(var.QtPlatformArgs)"
+                  Icon="qet.ico"
+                  WorkingDirectory="INSTALLDIR" />
+        <RegistryValue Root="HKCU"
+                       Key="Software\QElectroTech"
+                       Name="StartMenuShortcut"
+                       Type="integer" Value="1"
+                       KeyPath="yes" />
+      </Component>
+
+    </ComponentGroup>
+
+    <!-- ============================================================
+         .qet file association
+         ============================================================ -->
+    <ComponentGroup Id="CG_FileAssoc" Directory="INSTALLDIR">
+      <Component Id="C_FileAssoc" Guid="B3C4D5E6-F7A8-9012-7890-234567890123">
+        <RegistryValue Root="HKCR" Key=".qet" Type="string" Value="QElectroTech.Document" KeyPath="yes" />
+        <RegistryValue Root="HKCR" Key="QElectroTech.Document" Type="string" Value="QElectroTech Project" />
+        <RegistryValue Root="HKCR" Key="QElectroTech.Document\DefaultIcon" Type="string"
+                       Value="[INSTALLDIR]ico\qelectrotech.ico" />
+        <!-- Pass the same arguments as the shortcuts above: opening a .qet from
+             Explorer sets the working directory to the document's folder, so a
+             bare command line leaves QET unable to locate its data. Without the
+             lang-dir argument the UI falls back to the source language, which
+             is French. See issue #554. -->
+        <RegistryValue Root="HKCR" Key="QElectroTech.Document\shell\open\command" Type="string"
+                       Value="&quot;[INSTALLDIR]bin\qelectrotech.exe&quot; --common-elements-dir=&quot;[INSTALLDIR]elements/&quot; --common-tbt-dir=&quot;[INSTALLDIR]titleblocks/&quot; --lang-dir=&quot;[INSTALLDIR]lang/&quot; $(var.QtPlatformArgs) &quot;%1&quot;" />
+      </Component>
+    </ComponentGroup>
+
+    <!-- ============================================================
+         Icon for shortcuts
+         ============================================================ -->
+    <Icon Id="qet.ico" SourceFile="$(var.FilesDir)\ico\qelectrotech.ico" />
+
+    <!-- ============================================================
+         CustomAction: set elements\ subtree read-only after install
+
+         Pattern used: two-step SetProperty + Exec
+         1. CA_ResolveElementsPath (immediate, SetProperty):
+              copies the runtime value of INSTALLDIR into the property
+              ELEMENTS_READONLY_CMD, building the full powershell command.
+         2. CA_SetElementsReadOnly (deferred, Execute="deferred"):
+              runs the command stored in ELEMENTS_READONLY_CMD.
+
+         This is the correct WiX v4/v7 pattern for passing a
+         directory path (resolved at runtime) to a deferred CA.
+         ============================================================ -->
+
+    <!-- Step 1: build the powershell command with the resolved INSTALLDIR -->
+    <CustomAction Id="CA_ResolveElementsPath"
+                  Property="CA_SetElementsReadOnly"
+                  Value="powershell.exe -NonInteractive -NoProfile -WindowStyle Hidden -Command &quot;Get-ChildItem -LiteralPath '[INSTALLDIR]elements' -Recurse -File | ForEach-Object { `$_.IsReadOnly = `$true }&quot;" />
+
+    <!-- Step 2: deferred execution of the powershell command -->
+    <CustomAction Id="CA_SetElementsReadOnly"
+                  BinaryRef="Wix4UtilCA_X86"
+                  DllEntry="WixQuietExec"
+                  Execute="deferred"
+                  Impersonate="no"
+                  Return="ignore" />
+
+    <InstallExecuteSequence>
+      <Custom Action="CA_ResolveElementsPath" After="InstallFiles" Condition="NOT Installed AND NOT REMOVE" />
+      <Custom Action="CA_SetElementsReadOnly" After="CA_ResolveElementsPath" Condition="NOT Installed AND NOT REMOVE" />
+    </InstallExecuteSequence>
+
+    <!-- ============================================================
+         Main feature (everything included)
+         ============================================================ -->
+    <Feature Id="ProductFeature" Title="QElectroTech" Level="1">
+      <ComponentGroupRef Id="CG_AllFiles" />
+      <ComponentGroupRef Id="CG_Shortcuts" />
+      <ComponentGroupRef Id="CG_FileAssoc" />
+    </Feature>
+
+    <!-- WixUI_Minimal with QElectroTech GPL-2 license -->
+    <ui:WixUI Id="WixUI_Minimal" />
+
+    <!-- WixVariable without ui: namespace, at Package level -->
+    <WixVariable Id="WixUILicenseRtf" Value="$(var.LicenseRtf)" />
+
+    <!-- Properties shown in Programs and Features -->
+    <Property Id="ARPPRODUCTICON" Value="qet.ico" />
+    <Property Id="ARPHELPLINK"    Value="https://qelectrotech.org" />
+    <Property Id="ARPURLINFOABOUT" Value="https://qelectrotech.org" />
+    <Property Id="ARPCOMMENTS"   Value="Free electrical schematic editor" />
+
+  </Package>
+</Wix>

build-aux/windows/nsis_base/files/README.md

@@ -40,8 +40,8 @@ git clone --recursive https://github.com/qelectrotech/qelectrotech-source-mirror
 Here are the technical choices made for the software development:
 
 *   Integrated development environment: [Qt Framework](https://www.qt.io/ide/)
-*   Libraries: Qt 5.x
-*   [KF5 Framework](https://github.com/KDE)  
+*   Libraries: Qt 5.x / Qt 6.x
+*   [KF5/6 Framework](https://github.com/KDE)  
     [Cmake](https://cmake.org/install/)   
     [kcoreaddons](https://github.com/KDE/kcoreaddons/tree/kf5)   
     [kwidgetsaddons](https://github.com/KDE/kwidgetsaddons/tree/kf5).  

cliff.toml

@@ -0,0 +1,63 @@
+# Configuration for git-cliff, tuned to mimic github_changelog_generator's output style
+# Doc: https://git-cliff.org/docs/configuration
+
+[changelog]
+header = """
+# Changelog\n
+All notable changes to QElectroTech are documented here.\n
+"""
+
+# Format proche de github_changelog_generator : titre de version avec lien de comparaison + date
+body = """
+{% if version %}\
+    ## [{{ version }}]\
+    {%- if previous.version %}({{ previous.version }}...{{ version }}){% endif %} \
+    - {{ timestamp | date(format="%Y-%m-%d") }}
+{% else %}\
+    ## [Unreleased]
+{% endif %}\
+{% for group, commits in commits | group_by(attribute="group") %}
+    ### {{ group | upper_first }}
+    {% for commit in commits | unique(attribute="message") %}
+        - {{ commit.message | trim | upper_first }} ([{{ commit.id | truncate(length=7, end="") }}](../../commit/{{ commit.id }}))\
+    {% endfor %}
+{% endfor %}\n
+"""
+
+footer = ""
+trim = true
+
+[git]
+conventional_commits = false
+filter_unconventional = false
+split_commits = false
+protect_breaking_commits = false
+filter_commits = false
+tag_pattern = "^[0-9]+\\.[0-9]+(\\.[0-9]+)?$"
+skip_tags = "nightly"
+ignore_tags = "nightly"
+topo_order = false
+sort_commits = "newest"
+
+# Ne garder que la première ligne du message (résumé), le corps détaillé
+# est retiré ici plutôt qu'au moment de l'affichage, pour que la
+# déduplication par message fonctionne correctement.
+commit_preprocessors = [
+  { pattern = "(?s)\n.*", replace = "" },
+]
+
+# Groupement par mots-clés (FR + EN), puisque l'historique QET
+# ne suit pas Conventional Commits strictement.
+commit_parsers = [
+  { message = "^[Mm]erge", skip = true },
+  { message = "^(?i)(fix|corrig|répar|bug)", group = "🐛 Bug Fixes" },
+  { message = "^(?i)(feat|ajout|add|nouvelle|nouveau)", group = "🚀 Features" },
+  { message = "^(?i)(doc|traduc|translation)", group = "📝 Documentation" },
+  { message = "^(?i)(refactor|clean|nettoy|optimi)", group = "♻️ Refactoring / Cleanup" },
+  { message = "^(?i)(element|librairie|library)", group = "📦 Elements / Libraries" },
+  { message = ".*", group = "🔧 Other Changes" },
+]
+
+[remote.github]
+owner = "qelectrotech"
+repo = "qelectrotech-source-mirror"

cmake/define_definitions.cmake

@@ -25,24 +25,24 @@ message("INSTALL_PREFIX             " ${INSTALL_PREFIX})
 message("QET_BINARY_PATH            " ${QET_BINARY_PATH})
 
 if(${QET_COMMON_COLLECTION_PATH} STRGREATER "")
-  message("QET_COMMON_COLLECTION_PATH " ${INSTALL_PREFIX}${QET_COMMON_COLLECTION_PATH})
-  add_definitions(-DQET_COMMON_COLLECTION_PATH=${INSTALL_PREFIX}${QET_COMMON_COLLECTION_PATH})
+  message("QET_COMMON_COLLECTION_PATH " ${COMPIL_PREFIX}${QET_COMMON_COLLECTION_PATH})
+  add_definitions(-DQET_COMMON_COLLECTION_PATH=${COMPIL_PREFIX}${QET_COMMON_COLLECTION_PATH})
 endif()
 if(${QET_COMMON_TBT_PATH} STRGREATER "")
-  message("QET_COMMON_TBT_PATH        " ${INSTALL_PREFIX}${QET_COMMON_TBT_PATH})
-  add_definitions(-DQET_COMMON_TBT_PATH=${INSTALL_PREFIX}${QET_COMMON_TBT_PATH})
+  message("QET_COMMON_TBT_PATH        " ${COMPIL_PREFIX}${QET_COMMON_TBT_PATH})
+  add_definitions(-DQET_COMMON_TBT_PATH=${COMPIL_PREFIX}${QET_COMMON_TBT_PATH})
 endif()
 if(${QET_LANG_PATH_RELATIVE_TO_BINARY_PATH})
   add_definitions(-DQET_LANG_PATH_RELATIVE_TO_BINARY_PATH)
 endif()
 if(${QET_LANG_PATH} STRGREATER "")
-  message("QET_LANG_PATH              " ${INSTALL_PREFIX}${QET_LANG_PATH})
-  add_definitions(-DQET_LANG_PATH=${INSTALL_PREFIX}${QET_LANG_PATH})
+  message("QET_LANG_PATH              " ${COMPIL_PREFIX}${QET_LANG_PATH})
+  add_definitions(-DQET_LANG_PATH=${COMPIL_PREFIX}${QET_LANG_PATH})
 endif()
 if (NOT MINGW)
 if(${QET_EXAMPLES_PATH} STRGREATER "")
-  message("QET_EXAMPLES_PATH          " ${INSTALL_PREFIX}${QET_EXAMPLES_PATH})
-  add_definitions(-DQET_EXAMPLES_PATH=${INSTALL_PREFIX}${QET_EXAMPLES_PATH})
+  message("QET_EXAMPLES_PATH          " ${COMPIL_PREFIX}${QET_EXAMPLES_PATH})
+  add_definitions(-DQET_EXAMPLES_PATH=${COMPIL_PREFIX}${QET_EXAMPLES_PATH})
 endif()
 endif()
 
@@ -62,10 +62,9 @@ message("PROJECT_SOURCE_DIR        :" ${PROJECT_SOURCE_DIR})
 message("QET_DIR                   :" ${QET_DIR})
 message("GIT_COMMIT_SHA            :" ${GIT_COMMIT_SHA})
 
-if(BUILD_WITH_KF5)
-  message("KF5_GIT_TAG               :" ${KF5_GIT_TAG})
+if(BUILD_WITH_KF)
+  message("KF_GIT_TAG               :" ${KF_GIT_TAG})
 else()
-  add_definitions(-DBUILD_WITHOUT_KF5)
+  add_definitions(-DBUILD_WITHOUT_KF)
 endif()
 message("QET_COMPONENTS            :" ${QET_COMPONENTS})
-message("QT_VERSION_MAJOR          :" ${QT_VERSION_MAJOR})

cmake/developer_options.cmake

@@ -31,5 +31,19 @@ add_definitions(-DQT_MESSAGELOGCONTEXT)
 # In order to do so, uncomment the following line.
 #add_definitions(-DTODO_LIST)
 
-# Build with KF5
-option(BUILD_WITH_KF5 "Build with KF5" ON)
+# Build with KDE Frameworks. 
+option(BUILD_WITH_KF "Build with KDE Frameworks" ON)
+
+# Precompiled headers for the Qt umbrella headers.
+#
+# Off by default and intended for local development only. Building QET is
+# dominated by re-parsing Qt's headers: a 214-line .cpp expands to ~198,000
+# preprocessed lines, and compiling one translation unit costs ~4.1 s of which
+# only ~0.35 s is optimisation (-O0 instead of -O3 saves 8%). A PCH caches the
+# parsed header state and takes that ~4.1 s down to ~1.2 s.
+#
+# It is deliberately NOT on by default: a PCH satisfies includes that a source
+# file forgot to make itself, so code written with it enabled can fail to
+# compile for everyone else. Leaving it off keeps CI and contributors on the
+# strict behaviour, and only developers who opt in trade that for the speed.
+option(QET_ENABLE_PCH "Use precompiled headers (developer build speed; may mask missing #includes)" OFF)

cmake/fetch_kdeaddons.cmake

@@ -16,52 +16,66 @@
 
 message(" - fetch_kdeaddons")
 
-if(DEFINED BUILD_WITH_KF5)
+if(BUILD_WITH_KF)
   Include(FetchContent)
 
-  option(BUILD_KF5 "Build KF5 libraries, use system ones otherwise" YES)
+  option(BUILD_KF "Build KF libraries, use system ones otherwise" YES)
 
-  if(BUILD_KF5)
+  if(BUILD_KF)
 
-    if(NOT DEFINED KF5_GIT_TAG)
-      #https://qelectrotech.org/forum/viewtopic.php?pid=13924#p13924
-      set(KF5_GIT_TAG v5.77.0)
+    if(NOT DEFINED KF_GIT_TAG)
+      # this is a more or less random version, taken as an conservative approach
+      set(KF_GIT_TAG v6.10.0)
     endif()
+    # using a function in order to limit the scope of the variables
+    # with CMake >=3.25 we could use a block()
+    function(qet_make_kf_available)
+      # Fix stop the run autotests of kcoreaddons
+      # see
+      # https://invent.kde.org/frameworks/kcoreaddons/-/blob/master/CMakeLists.txt#L98
+      # issue:
+      # CMake Error at /usr/share/ECM/modules/ECMAddTests.cmake:89 (add_executable):
+      # Cannot find source file:
+      # see
+      # https://qelectrotech.org/forum/viewtopic.php?pid=13929#p13929
+      set(KDE_SKIP_TEST_SETTINGS ON)
+      set(BUILD_TESTING OFF)
+    
+      # QElectroTech is a plain QtWidgets application with no QML anywhere in
+      # it; these disable optional features of the fetched KF modules that
+      # would otherwise pull in extra Qt6 components (e.g. Qt6Qml) we don't
+      # have and don't need.
+      set(BUILD_DESIGNERPLUGIN OFF)
+      set(KCOREADDONS_USE_QML OFF)
+      set(BUILD_QCH OFF)
+      set(BUILD_SHARED_LIBS OFF)
 
-    # Fix stop the run autotests of kcoreaddons
-    # see
-    # https://invent.kde.org/frameworks/kcoreaddons/-/blob/master/CMakeLists.txt#L98
-    # issue:
-    # CMake Error at /usr/share/ECM/modules/ECMAddTests.cmake:89 (add_executable):
-    # Cannot find source file:
-    # see
-    # https://qelectrotech.org/forum/viewtopic.php?pid=13929#p13929
-    set(KDE_SKIP_TEST_SETTINGS "TRUE")
-    set(BUILD_TESTING "0")
-    FetchContent_Declare(
-      ecm
-      GIT_REPOSITORY https://invent.kde.org/frameworks/extra-cmake-modules.git
-      GIT_TAG        ${KF5_GIT_TAG})
-    FetchContent_MakeAvailable(ecm)
+      FetchContent_Declare(
+        ecm
+        GIT_REPOSITORY https://invent.kde.org/frameworks/extra-cmake-modules.git
+        GIT_TAG        ${KF_GIT_TAG})
+      FetchContent_MakeAvailable(ecm)
 
-    FetchContent_Declare(
-      kcoreaddons
-      GIT_REPOSITORY https://invent.kde.org/frameworks/kcoreaddons.git
-      GIT_TAG        ${KF5_GIT_TAG})
-    FetchContent_MakeAvailable(kcoreaddons)
+      FetchContent_Declare(
+        kcoreaddons
+        GIT_REPOSITORY https://invent.kde.org/frameworks/kcoreaddons.git
+        GIT_TAG        ${KF_GIT_TAG})
+      FetchContent_MakeAvailable(kcoreaddons)
 
-    FetchContent_Declare(
-      kwidgetsaddons
-      GIT_REPOSITORY https://invent.kde.org/frameworks/kwidgetsaddons.git
-      GIT_TAG        ${KF5_GIT_TAG})
-    FetchContent_MakeAvailable(kwidgetsaddons)
+      FetchContent_Declare(
+        kwidgetsaddons
+        GIT_REPOSITORY https://invent.kde.org/frameworks/kwidgetsaddons.git
+        GIT_TAG        ${KF_GIT_TAG})
+      FetchContent_MakeAvailable(kwidgetsaddons)
+    endfunction()
+    qet_make_kf_available()
   else()
-    find_package(KF5CoreAddons REQUIRED)
-    find_package(KF5WidgetsAddons REQUIRED)
+    find_package(KF6CoreAddons REQUIRED)
+    find_package(KF6WidgetsAddons REQUIRED)
   endif()
 
-  set(KF5_PRIVATE_LIBRARIES
-    KF5::WidgetsAddons
-    KF5::CoreAddons
+  set(KF_PRIVATE_LIBRARIES
+    KF6::WidgetsAddons
+    KF6::CoreAddons
     )
 endif()

cmake/fetch_pugixml.cmake

@@ -25,8 +25,8 @@ if(BUILD_PUGIXML)
   FetchContent_Declare(
     pugixml
     GIT_REPOSITORY https://github.com/zeux/pugixml.git
-    GIT_TAG        v1.11.4)
-
+    GIT_TAG        v1.15)
+  set(PUGIXML_INSTALL OFF CACHE INTERNAL "")
   FetchContent_MakeAvailable(pugixml)
 else()
   find_package(pugixml REQUIRED)

cmake/fetch_singleapplication.cmake

@@ -23,9 +23,17 @@ set(QAPPLICATION_CLASS QApplication)
 
 Include(FetchContent)
 
+if(EXISTS "${CMAKE_SOURCE_DIR}/SingleApplication/CMakeLists.txt")
+  # Submodule deja present dans l'arbre source (clone --recursive, tarball
+  # de distro deja peuple via "git submodule update", etc.) : on l'utilise
+  # tel quel, sans acces reseau. Necessaire pour les builds hors-ligne
+  # (pbuilder/sbuild avec FETCHCONTENT_FULLY_DISCONNECTED=ON, Launchpad PPA...).
+  set(FETCHCONTENT_SOURCE_DIR_SINGLEAPPLICATION "${CMAKE_SOURCE_DIR}/SingleApplication")
+endif()
+
 FetchContent_Declare(
   SingleApplication
   GIT_REPOSITORY https://github.com/itay-grudev/SingleApplication.git
   GIT_TAG        v3.2.0)
-
+set(QT_DEFAULT_MAJOR_VERSION 6)
 FetchContent_MakeAvailable(SingleApplication)

cmake/paths_compilation_installation.cmake

@@ -20,15 +20,15 @@ message(" - paths_compilation_installation")
 
 if(UNIX AND NOT APPLE)
   # for Linux, BSD, Solaris, Minix
-  set(COMPIL_PREFIX               "/usr/local/")
-  set(INSTALL_PREFIX              "/usr/local/")
+  set(COMPIL_PREFIX               "${CMAKE_INSTALL_PREFIX}/")
+  set(INSTALL_PREFIX              "${CMAKE_INSTALL_PREFIX}/")
   set(QET_BINARY_PATH             "bin/")
   set(QET_COMMON_COLLECTION_PATH  "share/qelectrotech/elements/")
   set(QET_COMMON_TBT_PATH         "share/qelectrotech/titleblocks/")
   set(QET_LANG_PATH               "share/qelectrotech/lang/")
   set(QET_EXAMPLES_PATH           "share/qelectrotech/examples/")
   set(QET_LICENSE_PATH            "doc/qelectrotech/")
-  set(QET_MIME_PACKAGE_PATH       "../share/mime/packages/")
+  set(QET_MIME_PACKAGE_PATH       "share/mime/packages/")
   set(QET_DESKTOP_PATH            "share/applications/")
   set(QET_ICONS_PATH              "share/icons/hicolor/")
   set(QET_MAN_PATH                "man/")
@@ -58,7 +58,10 @@ if(WIN32)
   set(QET_BINARY_PATH             "./")
   set(QET_COMMON_COLLECTION_PATH  "elements/")
   set(QET_COMMON_TBT_PATH         "titleblocks/")
-  set(QET_LANG_PATH               "l10n/")
+  # "lang/" and not "l10n/": that is where every Windows packaging actually
+  # puts the .qm files (see build-aux/windows/QElectroTech.wxs and the
+  # windows-build workflow), and what the shortcuts pass as --lang-dir.
+  set(QET_LANG_PATH               "lang/")
   set(QET_LICENSE_PATH            "./")
   # Liste des ressources Windows
 #RC_FILE = qelectrotech.rc

cmake/qet_compilation_vars.cmake

@@ -16,6 +16,12 @@
 
 message(" - qet_compilation_vars")
 
+# Note: GuiPrivate is intentionally NOT in this list. 
+# Qt >= 6.7 ships it as a proper find_package component, but some distro
+# packages (e.g. Ubuntu's qt6-base-private-dev) omit Qt6GuiPrivateConfig.cmake
+# and only provide the implicit Qt6::GuiPrivate target created alongside
+# Qt6::Gui. Checks are done in the main CMakeLists.txt
+# (Needed for QPdfEngine::drawHyperlink, the PDF internal links.)
 set(QET_COMPONENTS
   LinguistTools
   PrintSupport
@@ -26,9 +32,17 @@ set(QET_COMPONENTS
   Widgets
   Concurrent)
 
+# Note: Pdf is intentionally NOT in this list. Some Qt6 distributions
+# (notably the Flatpak org.kde.Platform runtime) don't ship the QtPdf
+# module at all - it lives in the qtwebengine source tree, not Qt6 core.
+# Requesting it here as a REQUIRED component would fail the whole
+# configure on those setups. It is probed separately, QUIET and
+# non-fatal, right after the main find_package() call below.
+
 set(QET_PRIVATE_LIBRARIES
   Qt::PrintSupport
   Qt::Gui
+  Qt::GuiPrivate   # Required for QPdfEngine::drawHyperlink (PDF internal links)
   Qt::Xml
   Qt::Svg
   Qt::Sql
@@ -37,6 +51,9 @@ set(QET_PRIVATE_LIBRARIES
   Qt::Concurrent
   )
 
+# Qt::Pdf is appended conditionally in CMakeLists.txt, once we know
+# whether the module was actually found (see QET_HAS_QTPDF).
+
 set(QET_RES_FILES
   ${QET_DIR}/sources/autoNum/ui/autonumberingdockwidget.ui
   ${QET_DIR}/sources/autoNum/ui/autonumberingmanagementw.ui
@@ -83,7 +100,6 @@ set(QET_RES_FILES
   ${QET_DIR}/sources/ui/configsaveloaderwidget.ui
   ${QET_DIR}/sources/ui/diagramcontextwidget.ui
   ${QET_DIR}/sources/ui/diagrameditorhandlersizewidget.ui
-  ${QET_DIR}/sources/ui/diagramselection.ui
   ${QET_DIR}/sources/ui/dialogwaiting.ui
   ${QET_DIR}/sources/ui/dynamicelementtextitemeditor.ui
   ${QET_DIR}/sources/ui/elementinfopartwidget.ui
@@ -106,6 +122,48 @@ set(QET_RES_FILES
   ${QET_DIR}/sources/ui/configpage/generalconfigurationpage.ui
   )
 set(QET_SRC_FILES
+  ${QET_DIR}/sources/cli_export.cpp
+  ${QET_DIR}/sources/cli_export.h
+  ${QET_DIR}/sources/logging/crashhandler.cpp
+  ${QET_DIR}/sources/logging/crashhandler.h
+  ${QET_DIR}/sources/logging/eventloopwatchdog.cpp
+  ${QET_DIR}/sources/logging/eventloopwatchdog.h
+  ${QET_DIR}/sources/logging/logring.cpp
+  ${QET_DIR}/sources/logging/logring.h
+  ${QET_DIR}/sources/logging/qetlogger.cpp
+  ${QET_DIR}/sources/logging/qetlogger.h
+  ${QET_DIR}/sources/logging/ui/diagnosticsreportdialog.cpp
+  ${QET_DIR}/sources/logging/ui/diagnosticsreportdialog.h
+  ${QET_DIR}/sources/pdf_links.cpp
+  ${QET_DIR}/sources/pdf_links.h
+  ${QET_DIR}/sources/import/edz/edzarchive.cpp
+  ${QET_DIR}/sources/import/edz/edzarchive.h
+  ${QET_DIR}/sources/import/edz/edzpart.cpp
+  ${QET_DIR}/sources/import/edz/edzpart.h
+  ${QET_DIR}/sources/import/edz/edzelementbuilder.cpp
+  ${QET_DIR}/sources/import/edz/edzelementbuilder.h
+  ${QET_DIR}/sources/import/edz/edzimporter.cpp
+  ${QET_DIR}/sources/import/edz/edzimporter.h
+  ${QET_DIR}/sources/import/edz/edzsevenzip.cpp
+  ${QET_DIR}/sources/import/edz/edzsevenzip.h
+  ${QET_DIR}/sources/import/edz/lzma/7zAlloc.c
+  ${QET_DIR}/sources/import/edz/lzma/7zArcIn.c
+  ${QET_DIR}/sources/import/edz/lzma/7zBuf.c
+  ${QET_DIR}/sources/import/edz/lzma/7zCrc.c
+  ${QET_DIR}/sources/import/edz/lzma/7zCrcOpt.c
+  ${QET_DIR}/sources/import/edz/lzma/7zDec.c
+  ${QET_DIR}/sources/import/edz/lzma/7zFile.c
+  ${QET_DIR}/sources/import/edz/lzma/7zStream.c
+  ${QET_DIR}/sources/import/edz/lzma/Bcj2.c
+  ${QET_DIR}/sources/import/edz/lzma/Bra.c
+  ${QET_DIR}/sources/import/edz/lzma/Bra86.c
+  ${QET_DIR}/sources/import/edz/lzma/BraIA64.c
+  ${QET_DIR}/sources/import/edz/lzma/CpuArch.c
+  ${QET_DIR}/sources/import/edz/lzma/Delta.c
+  ${QET_DIR}/sources/import/edz/lzma/Lzma2Dec.c
+  ${QET_DIR}/sources/import/edz/lzma/LzmaDec.c
+  ${QET_DIR}/sources/import/edz/lzma/Ppmd7.c
+  ${QET_DIR}/sources/import/edz/lzma/Ppmd7Dec.c
   ${QET_DIR}/sources/borderproperties.cpp
   ${QET_DIR}/sources/borderproperties.h
   ${QET_DIR}/sources/bordertitleblock.cpp
@@ -115,7 +173,11 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/conductornumexport.cpp
   ${QET_DIR}/sources/wiringlistexport.h
   ${QET_DIR}/sources/wiringlistexport.cpp
+  ${QET_DIR}/sources/ui/wiringlistdialog.h
+  ${QET_DIR}/sources/ui/wiringlistdialog.cpp
   ${QET_DIR}/sources/conductornumexport.h
+  ${QET_DIR}/sources/bomexport.cpp
+  ${QET_DIR}/sources/bomexport.h
   ${QET_DIR}/sources/conductorprofile.cpp
   ${QET_DIR}/sources/conductorprofile.h
   ${QET_DIR}/sources/conductorproperties.cpp
@@ -127,6 +189,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/configdialog.h
   ${QET_DIR}/sources/createdxf.cpp
   ${QET_DIR}/sources/createdxf.h
+  ${QET_DIR}/sources/dxfpaintdevice.cpp
+  ${QET_DIR}/sources/dxfpaintdevice.h
   ${QET_DIR}/sources/diagramcommands.cpp
   ${QET_DIR}/sources/diagramcommands.h
   ${QET_DIR}/sources/diagramcontent.cpp
@@ -165,6 +229,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/exportpropertieswidget.h
   ${QET_DIR}/sources/genericpanel.cpp
   ${QET_DIR}/sources/genericpanel.h
+  ${QET_DIR}/sources/lastusedstyle.cpp
+  ${QET_DIR}/sources/lastusedstyle.h
   ${QET_DIR}/sources/machine_info.cpp
   ${QET_DIR}/sources/machine_info.h
   ${QET_DIR}/sources/main.cpp
@@ -182,6 +248,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/qet.h
   ${QET_DIR}/sources/qeticons.cpp
   ${QET_DIR}/sources/qeticons.h
+  ${QET_DIR}/sources/qetpalette.cpp
+  ${QET_DIR}/sources/qetpalette.h
   ${QET_DIR}/sources/qetinformation.cpp
   ${QET_DIR}/sources/qetinformation.h
   ${QET_DIR}/sources/qetmainwindow.cpp
@@ -208,6 +276,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/qtextorientationwidget.h
   ${QET_DIR}/sources/recentfiles.cpp
   ${QET_DIR}/sources/recentfiles.h
+  ${QET_DIR}/sources/shortcutmanager.cpp
+  ${QET_DIR}/sources/shortcutmanager.h
   ${QET_DIR}/sources/titleblockcell.cpp
   ${QET_DIR}/sources/titleblockcell.h
   ${QET_DIR}/sources/titleblockproperties.cpp
@@ -244,18 +314,25 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/dataBase/ui/summaryquerywidget.cpp
   ${QET_DIR}/sources/dataBase/ui/summaryquerywidget.h
 
+  ${QET_DIR}/sources/autobreakconductor.cpp
+  ${QET_DIR}/sources/autobreakconductor.h
+
   ${QET_DIR}/sources/diagramevent/diagrameventaddelement.cpp
   ${QET_DIR}/sources/diagramevent/diagrameventaddelement.h
   ${QET_DIR}/sources/diagramevent/diagrameventaddimage.cpp
   ${QET_DIR}/sources/diagramevent/diagrameventaddimage.h
   ${QET_DIR}/sources/diagramevent/diagrameventaddshape.cpp
   ${QET_DIR}/sources/diagramevent/diagrameventaddshape.h
+  ${QET_DIR}/sources/diagramevent/diagrameventaddpath.cpp
+  ${QET_DIR}/sources/diagramevent/diagrameventaddpath.h
   ${QET_DIR}/sources/diagramevent/diagrameventaddtext.cpp
   ${QET_DIR}/sources/diagramevent/diagrameventaddtext.h
   ${QET_DIR}/sources/diagramevent/diagrameventinterface.cpp
   ${QET_DIR}/sources/diagramevent/diagrameventinterface.h
   ${QET_DIR}/sources/diagramevent/diagrameventaddmacro.cpp
   ${QET_DIR}/sources/diagramevent/diagrameventaddmacro.h
+  ${QET_DIR}/sources/diagramevent/diagrameventaddpaste.cpp
+  ${QET_DIR}/sources/diagramevent/diagrameventaddpaste.h
 
   ${QET_DIR}/sources/dvevent/dveventinterface.cpp
   ${QET_DIR}/sources/dvevent/dveventinterface.h
@@ -319,6 +396,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/editor/graphicspart/partpolygon.h
   ${QET_DIR}/sources/editor/graphicspart/partrectangle.cpp
   ${QET_DIR}/sources/editor/graphicspart/partrectangle.h
+  ${QET_DIR}/sources/editor/graphicspart/partplctable.cpp
+  ${QET_DIR}/sources/editor/graphicspart/partplctable.h
   ${QET_DIR}/sources/editor/graphicspart/partterminal.cpp
   ${QET_DIR}/sources/editor/graphicspart/partterminal.h
   ${QET_DIR}/sources/editor/graphicspart/parttext.cpp
@@ -398,7 +477,11 @@ set(QET_SRC_FILES
 
   ${QET_DIR}/sources/project/projectpropertieshandler.cpp
   ${QET_DIR}/sources/project/projectpropertieshandler.h
+  ${QET_DIR}/sources/project/projectusagetracker.cpp
+  ${QET_DIR}/sources/project/projectusagetracker.h
 
+  ${QET_DIR}/sources/properties/deviceinformation.cpp
+  ${QET_DIR}/sources/properties/deviceinformation.h
   ${QET_DIR}/sources/properties/elementdata.cpp
   ${QET_DIR}/sources/properties/elementdata.h
   ${QET_DIR}/sources/properties/propertiesinterface.cpp
@@ -446,6 +529,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/qetgraphicsitem/qetgraphicsitem.h
   ${QET_DIR}/sources/qetgraphicsitem/qetshapeitem.cpp
   ${QET_DIR}/sources/qetgraphicsitem/qetshapeitem.h
+  ${QET_DIR}/sources/qetgraphicsitem/shapetransform.cpp
+  ${QET_DIR}/sources/qetgraphicsitem/shapetransform.h
   ${QET_DIR}/sources/qetgraphicsitem/qgraphicsitemutility.cpp
   ${QET_DIR}/sources/qetgraphicsitem/qgraphicsitemutility.h
   ${QET_DIR}/sources/qetgraphicsitem/reportelement.cpp
@@ -484,7 +569,6 @@ set(QET_SRC_FILES
 
   ${QET_DIR}/sources/richtext/richtexteditor.cpp
   ${QET_DIR}/sources/richtext/richtexteditor_p.h
-  ${QET_DIR}/sources/richtext/ui_addlinkdialog.h
 
   ${QET_DIR}/sources/SearchAndReplace/searchandreplaceworker.cpp
   ${QET_DIR}/sources/SearchAndReplace/searchandreplaceworker.h
@@ -499,6 +583,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/SearchAndReplace/ui/replacefoliowidget.h
   ${QET_DIR}/sources/SearchAndReplace/ui/searchandreplacewidget.cpp
   ${QET_DIR}/sources/SearchAndReplace/ui/searchandreplacewidget.h
+  ${QET_DIR}/sources/svg/qetsvg.cpp
+  ${QET_DIR}/sources/svg/qetsvg.h
 
   ${QET_DIR}/sources/titleblock/dimension.cpp
   ${QET_DIR}/sources/titleblock/dimension.h
@@ -609,6 +695,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/ui/borderpropertieswidget.h
   ${QET_DIR}/sources/ui/compositetexteditdialog.cpp
   ${QET_DIR}/sources/ui/compositetexteditdialog.h
+  ${QET_DIR}/sources/ui/contactgroupselectiondialog.cpp
+  ${QET_DIR}/sources/ui/contactgroupselectiondialog.h
   ${QET_DIR}/sources/ui/conductorpropertiesdialog.cpp
   ${QET_DIR}/sources/ui/conductorpropertiesdialog.h
   ${QET_DIR}/sources/ui/conductorpropertieswidget.cpp
@@ -623,14 +711,16 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/ui/diagrampropertiesdialog.h
   ${QET_DIR}/sources/ui/diagrampropertieseditordockwidget.cpp
   ${QET_DIR}/sources/ui/diagrampropertieseditordockwidget.h
-  ${QET_DIR}/sources/ui/diagramselection.cpp
-  ${QET_DIR}/sources/ui/diagramselection.h
+  ${QET_DIR}/sources/ui/backupdialog.cpp
+  ${QET_DIR}/sources/ui/backupdialog.h
   ${QET_DIR}/sources/ui/dialogwaiting.cpp
   ${QET_DIR}/sources/ui/dialogwaiting.h
   ${QET_DIR}/sources/ui/dynamicelementtextitemeditor.cpp
   ${QET_DIR}/sources/ui/dynamicelementtextitemeditor.h
   ${QET_DIR}/sources/ui/dynamicelementtextmodel.cpp
   ${QET_DIR}/sources/ui/dynamicelementtextmodel.h
+  ${QET_DIR}/sources/ui/customelementinfopartwidget.cpp
+  ${QET_DIR}/sources/ui/customelementinfopartwidget.h
   ${QET_DIR}/sources/ui/elementinfopartwidget.cpp
   ${QET_DIR}/sources/ui/elementinfopartwidget.h
   ${QET_DIR}/sources/ui/elementinfowidget.cpp
@@ -641,12 +731,18 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/ui/elementpropertieswidget.h
   ${QET_DIR}/sources/ui/formulaassistantdialog.cpp
   ${QET_DIR}/sources/ui/formulaassistantdialog.h
+  ${QET_DIR}/sources/ui/imagecropdialog.cpp
+  ${QET_DIR}/sources/ui/imagecropdialog.h
   ${QET_DIR}/sources/ui/imagepropertieswidget.cpp
   ${QET_DIR}/sources/ui/imagepropertieswidget.h
+  ${QET_DIR}/sources/ui/imagetransparentcolordialog.cpp
+  ${QET_DIR}/sources/ui/imagetransparentcolordialog.h
   ${QET_DIR}/sources/ui/importelementdialog.cpp
   ${QET_DIR}/sources/ui/importelementdialog.h
   ${QET_DIR}/sources/ui/importelementtextpatterndialog.cpp
   ${QET_DIR}/sources/ui/importelementtextpatterndialog.h
+  ${QET_DIR}/sources/ui/jumptoelementdialog.cpp
+  ${QET_DIR}/sources/ui/jumptoelementdialog.h
   ${QET_DIR}/sources/ui/inditextpropertieswidget.cpp
   ${QET_DIR}/sources/ui/inditextpropertieswidget.h
   ${QET_DIR}/sources/ui/linksingleelementwidget.cpp
@@ -655,6 +751,8 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/ui/marginseditdialog.h
   ${QET_DIR}/sources/ui/masterpropertieswidget.cpp
   ${QET_DIR}/sources/ui/masterpropertieswidget.h
+  ${QET_DIR}/sources/ui/plclinkwidget.cpp
+  ${QET_DIR}/sources/ui/plclinkwidget.h
   ${QET_DIR}/sources/ui/multipastedialog.cpp
   ${QET_DIR}/sources/ui/multipastedialog.h
   ${QET_DIR}/sources/ui/potentialselectordialog.cpp
@@ -678,9 +776,15 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/ui/configpage/generalconfigurationpage.h
   ${QET_DIR}/sources/ui/configpage/projectconfigpages.cpp
   ${QET_DIR}/sources/ui/configpage/projectconfigpages.h
+  ${QET_DIR}/sources/ui/configpage/guidespropertieswidget.cpp
+  ${QET_DIR}/sources/ui/configpage/guidespropertieswidget.h
+  ${QET_DIR}/sources/ui/configpage/shortcutsconfigpage.cpp
+  ${QET_DIR}/sources/ui/configpage/shortcutsconfigpage.h
 
   ${QET_DIR}/sources/undocommand/addelementtextcommand.cpp
   ${QET_DIR}/sources/undocommand/addelementtextcommand.h
+  ${QET_DIR}/sources/undocommand/adddiagramcommand.cpp
+  ${QET_DIR}/sources/undocommand/adddiagramcommand.h
   ${QET_DIR}/sources/undocommand/addgraphicsobjectcommand.cpp
   ${QET_DIR}/sources/undocommand/addgraphicsobjectcommand.h
   ${QET_DIR}/sources/undocommand/changeelementdatacommand.cpp
@@ -695,8 +799,16 @@ set(QET_SRC_FILES
   ${QET_DIR}/sources/undocommand/itemmodelcommand.h
   ${QET_DIR}/sources/undocommand/linkelementcommand.cpp
   ${QET_DIR}/sources/undocommand/linkelementcommand.h
+  ${QET_DIR}/sources/undocommand/movediagramcommand.cpp
+  ${QET_DIR}/sources/undocommand/movediagramcommand.h
+  ${QET_DIR}/sources/undocommand/removediagramcommand.cpp
+  ${QET_DIR}/sources/undocommand/removediagramcommand.h
+  ${QET_DIR}/sources/undocommand/setautonumcontextcommand.cpp
+  ${QET_DIR}/sources/undocommand/setautonumcontextcommand.h
   ${QET_DIR}/sources/undocommand/rotateselectioncommand.cpp
   ${QET_DIR}/sources/undocommand/rotateselectioncommand.h
+  ${QET_DIR}/sources/undocommand/promoteshapecommand.cpp
+  ${QET_DIR}/sources/undocommand/promoteshapecommand.h
   ${QET_DIR}/sources/undocommand/rotatetextscommand.cpp
   ${QET_DIR}/sources/undocommand/rotatetextscommand.h
   ${QET_DIR}/sources/undocommand/movegraphicsitemcommand.cpp
@@ -713,8 +825,42 @@ set(QET_SRC_FILES
 
   ${QET_DIR}/sources/xml/terminalstripitemxml.cpp
   ${QET_DIR}/sources/xml/terminalstripitemxml.h
+  ${QET_DIR}/sources/xml/terminalstriplayoutpatternxml.cpp
+  ${QET_DIR}/sources/xml/terminalstriplayoutpatternxml.h
   )
 
+if(NOT BUILD_WITH_KF)
+  list(APPEND QET_SRC_FILES
+    ${QET_DIR}/sources/ui/nokde/kautosavefile.cpp
+    ${QET_DIR}/sources/ui/nokde/kautosavefile.h
+    ${QET_DIR}/sources/ui/nokde/kcolorbutton.cpp
+    ${QET_DIR}/sources/ui/nokde/kcolorbutton.h
+    ${QET_DIR}/sources/ui/nokde/kcolorcombo.cpp
+    ${QET_DIR}/sources/ui/nokde/kcolorcombo.h
+  )
+endif()
+
+list(APPEND QET_SRC_FILES
+    ${QET_DIR}/sources/diagramevent/diagrameventaddpdf.cpp
+    ${QET_DIR}/sources/diagramevent/diagrameventaddpdf.h
+    ${QET_DIR}/sources/ui/pdfpagesdialog.cpp
+    ${QET_DIR}/sources/ui/pdfpagesdialog.h
+)
+
+# JavaScript scripting (bugtracker #162). Unconditionally in the source
+# list, like the QtPdf files above: this file is included before the
+# QET_HAS_SCRIPTING probe runs in the top-level CMakeLists.txt, so the
+# variable isn't set yet here. Same pattern as QtPdf: always compiled, the
+# actual Qt::Qml dependent code is behind #ifdef QET_HAS_SCRIPTING inside
+# qetscripting.cpp/qetscriptapi.cpp themselves, compiling to a harmless
+# stub when the module wasn't found.
+list(APPEND QET_SRC_FILES
+  ${QET_DIR}/sources/scripting/qetscriptapi.cpp
+  ${QET_DIR}/sources/scripting/qetscriptapi.h
+  ${QET_DIR}/sources/scripting/qetscripting.cpp
+  ${QET_DIR}/sources/scripting/qetscripting.h
+)
+
 set(TS_FILES
   ${QET_DIR}/lang/qet_ar.ts
   ${QET_DIR}/lang/qet_ca.ts
@@ -730,6 +876,7 @@ set(TS_FILES
   ${QET_DIR}/lang/qet_hu.ts
   ${QET_DIR}/lang/qet_it.ts
   ${QET_DIR}/lang/qet_ja.ts
+  ${QET_DIR}/lang/qet_ko.ts
   ${QET_DIR}/lang/qet_mn.ts
   ${QET_DIR}/lang/qet_nb.ts
   ${QET_DIR}/lang/qet_nl.ts

cmake/start_options.cmake

@@ -28,5 +28,9 @@ add_definitions(-DQET_ALLOW_OVERRIDE_CD_OPTION)
 # Comment the line below to deactivate the --data-dir option
 add_definitions(-DQET_ALLOW_OVERRIDE_DD_OPTION)
 
-#comment the line below to disable the project database export
-#add_definitions(-DQET_EXPORT_PROJECT_DB) #error Todo
+# Enable project database export when requested by the build system.
+option(QET_EXPORT_PROJECT_DB "Enable project database export" OFF)
+
+if(QET_EXPORT_PROJECT_DB)
+    add_compile_definitions(QET_EXPORT_PROJECT_DB)
+endif()

doc/QElectroTech.qch

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:7b7798233e8251baac7717d4b0f991ad5fdf23a76d9fbe864d363e3b93458560
-size 529821696

docs/smart-device-bom.md

@@ -0,0 +1,93 @@
+# Smart Device Information and BOM CSV
+
+## Architecture
+
+- A `.qet` project is XML. Placed component properties are held in
+  `ElementData::m_informations`, a `DiagramContext`, and are serialized by the
+  existing `Element::fromXml()` and `Element::toXml()` path.
+- `DeviceInformation` is a typed view over that existing context. It does not
+  introduce a second data store. Updates made by the properties editor continue
+  to use `ChangeElementInformationCommand`, including undo/redo and dirty state.
+- The project database copies element contexts into `element_info` and exposes
+  reporting fields through `element_nomenclature_view`.
+- GUI and CLI BOM exports both use `BomExport::defaultQuery()` against that
+  view. The existing `BOMExportDialog` remains the only GUI export entry point;
+  users can still customize columns, filters, and grouped/ungrouped output.
+
+## Device Properties
+
+| Device field | XML/context key | Default BOM |
+| --- | --- | --- |
+| Device tag | `label` | Yes |
+| Manufacturer | `manufacturer` | Yes |
+| Part number | `manufacturer_reference` | Yes |
+| Model | `model` | Yes |
+| Description | `description` | Yes |
+| Category | `category` | Yes |
+| Quantity | `quantity` | Yes |
+| Voltage rating | `voltage_rating` | Yes |
+| Current rating | `current_rating` | Yes |
+| Page | `folio` from the diagram | Yes |
+| Notes | `notes` | Yes |
+
+The five new context keys are `model`, `category`, `voltage_rating`,
+`current_rating`, and `notes`. They are available in the existing information
+editor for Simple and Master elements, in symbol definitions, in the SQL
+nomenclature view, and in the export column picker.
+
+No XML version bump or migration is required. Missing keys read as empty
+strings, empty properties are omitted by the existing writer, and unknown
+context keys remain preserved. Quantity and ratings stay free text so existing
+unit conventions and decimal quantities are not changed implicitly.
+
+## BOM Policy
+
+The default BOM query exports one row per Simple or Master element. Slave
+contacts, terminal-strip elements, reports, thumbnails, and conductor
+definitions are excluded. A Master device is counted once and PLC I/O entries
+are not expanded. The existing `exclude_from_bom` property is honored by the
+SQL view, including common true representations (`true`, `1`, `yes`, `on`).
+
+The default columns are:
+
+`Device tag, Designation, Manufacturer, Part number, Model, Description,
+Category, Quantity, Voltage rating, Current rating, Page, Notes`.
+
+The existing **Format as bill of materials** checkbox provides grouped output;
+it is off by default so the initial export remains ungrouped. Users may change
+the query and column order through the existing dialog. The command-line
+`--export-bom` operation uses the same default query and column order.
+
+CSV output is UTF-8 with a BOM, semicolon-delimited, and quotes every field.
+Embedded quotes are doubled and embedded newlines are retained. `QSaveFile`
+provides atomic replacement; query, open, write, and commit failures are
+reported without deleting an existing destination first.
+
+## Verification
+
+The smart-device test is registered explicitly in
+`tests/qttest/CMakeLists.txt` and uses only Qt Test and Qt SQL. It is therefore
+part of the normal cross-platform CMake/CTest flow:
+
+```sh
+cmake -S . -B build -DPACKAGE_TESTS=ON
+cmake --build build
+ctest --test-dir build --output-on-failure
+```
+
+`tst_smart_device` checks the metadata column contract, Simple/Master filtering,
+stable page ordering, UTF-8 with Latin and non-Latin samples, CSV escaping, and
+atomic write success/failure. Existing project XML save/load tests cover the
+generic `DiagramContext` persistence path used by the new keys.
+
+Manual checks:
+
+1. Open an existing project and edit a Simple or Master element's information.
+2. Set all device fields, apply, undo, redo, save, close, and reopen.
+3. Open Project > Export as CSV and verify the device columns are preselected.
+4. Export with grouping both disabled and enabled.
+5. Verify leading-zero part numbers, non-Latin text, quotes, and newlines in a
+   UTF-8 CSV reader.
+
+Cable management, terminal-strip planning, automatic wire numbering, PLC I/O
+expansion, panel layout, and manufacturer catalog integration are out of scope.

ico/breeze-icons/scalable/apps/hidef/draw-bezier-curves.svg

@@ -0,0 +1,12 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24" width="24" height="24">
+  <defs id="defs3051">
+    <style type="text/css" id="current-color-scheme">
+      .ColorScheme-Text {
+        color:#232629;
+      }
+      </style>
+  </defs>
+  <g transform="translate(1,1)">
+    <path style="fill:currentColor;fill-opacity:1;stroke:none" d="m18.5 4c-.65424 0-1.202197.418077-1.408203 1h-13.0918v1c3.601 0 6.5 2.899 6.5 6.5 0 1.905514-.822115 3.601777-2.121094 4.787109-.245727-.180239-.548776-.287109-.878906-.287109-.831 0-1.5.669-1.5 1.5 0 .831.669 1.5 1.5 1.5.65424 0 1.202197-.418077 1.408203-1h4.091797v1h3v-3h-3v1h-3.912109c1.479147-1.367931 2.412109-3.317097 2.412109-5.5 0-2.788667-1.510668-5.207469-3.757813-6.5h9.349609c.206006.581923.753963 1 1.408203 1 .831 0 1.5-.669 1.5-1.5 0-.831-.669-1.5-1.5-1.5m0 1c.277 0 .5.223.5.5 0 .277-.223.5-.5.5-.06925 0-.135453-.013828-.195312-.039063-.179579-.075703-.304688-.253188-.304688-.460938 0-.06925.013828-.135453.039062-.195313.075704-.179578.253188-.304688.460938-.304688m-11 13c.277 0 .5.223.5.5 0 .277-.223.5-.5.5-.277 0-.5-.223-.5-.5 0-.277.223-.5.5-.5m6.5 0h1v1h-1v-1z" transform="translate(-.99999-.99999)" class="ColorScheme-Text"/>
+  </g>
+</svg>

ico/breeze-icons/scalable/apps/hidef/edit-opacity.svg

@@ -0,0 +1,14 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24" width="24" height="24">
+  <style type="text/css" id="current-color-scheme">
+      .ColorScheme-Text {
+        color:#232629;
+      }
+      </style>
+  <g transform="translate(1,1)">
+    <g class="ColorScheme-Text" fill="currentColor">
+      <path d="m6 14c0 2.77 2.23 5 5 5s5-2.23 5-5z" fill-rule="evenodd" opacity=".66"/>
+      <path d="m7.482 10c-.34.586-.65 1.148-.886 1.676a4.958 4.958 0 0 0 -.596 2.324h10c0-.845-.228-1.627-.596-2.324a18.518 18.518 0 0 0 -.886-1.676z" fill-rule="evenodd" opacity=".33"/>
+      <path d="m11 3c-.973 3.405-3.354 6.332-4.404 8.676a4.958 4.958 0 0 0 -.596 2.324c0 2.77 2.23 5 5 5s5-2.23 5-5c0-.845-.228-1.627-.596-2.324-1.05-2.344-3.431-5.271-4.404-8.676zm0 2.393c1.194 2.668 2.747 5.027 3.492 6.691l.012.03.016.029a3.94 3.94 0 0 1 .48 1.857c0 2.233-1.767 4-4 4a3.97 3.97 0 0 1 -4-4c0-.665.177-1.283.48-1.857l.016-.03.012-.029c.745-1.664 2.298-4.023 3.492-6.691z"/>
+    </g>
+  </g>
+</svg>

ico/breeze-icons/scalable/apps/hidef/image-flip-horizontal-symbolic.svg

@@ -0,0 +1,13 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 16 16">
+  <defs id="defs3051">
+    <style type="text/css" id="current-color-scheme">
+      .ColorScheme-Text {
+        color:#232629;
+      }
+      </style>
+  </defs>
+ <path style="fill:currentColor;fill-opacity:1;stroke:none" 
+     d="M 4 2 L 4 3 L 5 3 L 5 2 L 4 2 z M 11 2 L 11 3 L 12 3 L 12 2 L 11 2 z M 2 4 L 2 12 L 7 12 L 7 10 L 9 10 L 9 12 L 14 12 L 14 4 L 9 4 L 9 6 L 7 6 L 7 4 L 2 4 z M 3 5 L 6 5 L 6 11 L 3 11 L 3 5 z M 10 5 L 13 5 L 13 11 L 10 11 L 10 5 z M 11 6 L 11 10 L 12 10 L 12 6 L 11 6 z M 7 7 L 9 7 L 9 9 L 7 9 L 7 7 z M 4 13 L 4 14 L 5 14 L 5 13 L 4 13 z M 11 13 L 11 14 L 12 14 L 12 13 L 11 13 z "
+     class="ColorScheme-Text"
+     />
+</svg>

ico/breeze-icons/scalable/apps/hidef/image-flip-vertical-symbolic.svg

@@ -0,0 +1,13 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 16 16">
+  <defs id="defs3051">
+    <style type="text/css" id="current-color-scheme">
+      .ColorScheme-Text {
+        color:#232629;
+      }
+      </style>
+  </defs>
+ <path style="fill:currentColor;fill-opacity:1;stroke:none" 
+     d="M 4 2 L 4 7 L 6 7 L 6 9 L 4 9 L 4 14 L 12 14 L 12 9 L 10 9 L 10 7 L 12 7 L 12 2 L 4 2 z M 5 3 L 11 3 L 11 6 L 5 6 L 5 3 z M 2 4 L 2 5 L 3 5 L 3 4 L 2 4 z M 13 4 L 13 5 L 14 5 L 14 4 L 13 4 z M 7 7 L 9 7 L 9 9 L 7 9 L 7 7 z M 5 10 L 11 10 L 11 13 L 5 13 L 5 10 z M 2 11 L 2 12 L 3 12 L 3 11 L 2 11 z M 6 11 L 6 12 L 10 12 L 10 11 L 6 11 z M 13 11 L 13 12 L 14 12 L 14 11 L 13 11 z "
+     class="ColorScheme-Text"
+     />
+</svg>

ico/breeze-icons/scalable/apps/hidef/transform-crop.svg

@@ -0,0 +1,12 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24" width="24" height="24">
+  <defs id="defs3051">
+    <style type="text/css" id="current-color-scheme">
+      .ColorScheme-Text {
+        color:#232629;
+      }
+      </style>
+  </defs>
+  <g transform="translate(1,1)">
+    <path style="fill:currentColor;fill-opacity:1;stroke:none" d="M 3 3 L 3 5 L 3 6 L 6 6 L 6 5 L 6 3 L 4 3 L 3 3 z M 16 3 L 16 4 L 16 5 L 16 6 L 17 6 L 18 6 L 19 6 L 19 5 L 19 4 L 19 3 L 16 3 z M 4 4 L 5 4 L 5 5 L 4 5 L 4 4 z M 17 4 L 18 4 L 18 5 L 17 5 L 17 4 z M 7 5 L 7 6 L 9 6 L 9 5 L 7 5 z M 10 5 L 10 6 L 12 6 L 12 5 L 10 5 z M 13 5 L 13 6 L 15 6 L 15 5 L 13 5 z M 5 7 L 5 9 L 6 9 L 6 7 L 5 7 z M 16 7 L 16 9 L 17 9 L 17 7 L 16 7 z M 5 10 L 5 12 L 6 12 L 6 10 L 5 10 z M 16 10 L 16 12 L 17 12 L 17 10 L 16 10 z M 5 13 L 5 15 L 6 15 L 6 13 L 5 13 z M 16 13 L 16 15 L 17 15 L 17 13 L 16 13 z M 3 16 L 3 17 L 3 19 L 4 19 L 5 19 L 6 19 L 6 16 L 3 16 z M 7 16 L 7 17 L 9 17 L 9 16 L 7 16 z M 10 16 L 10 17 L 12 17 L 12 16 L 10 16 z M 13 16 L 13 17 L 15 17 L 15 16 L 13 16 z M 16 16 L 16 17 L 16 18 L 16 19 L 17 19 L 18 19 L 19 19 L 19 18 L 19 17 L 19 16 L 17 16 L 16 16 z M 4 17 L 5 17 L 5 18 L 4 18 L 4 17 z M 17 17 L 18 17 L 18 18 L 17 18 L 17 17 z " class="ColorScheme-Text"/>
+  </g>
+</svg>

ico/icon-themes.qrc

@@ -0,0 +1,486 @@
+<!DOCTYPE RCC>
+<!-- Generated by misc/make_icon_themes.py. Do not edit. -->
+<RCC version="1.0">
+    <qresource prefix="/ico">
+        <file>themes/qet/index.theme</file>
+        <file>themes/qet-dark/index.theme</file>
+        <file alias="themes/qet/16x16/application-exit.png">16x16/application-exit.png</file>
+        <file alias="themes/qet/16x16/arrow-left-double.png">16x16/arrow-left-double.png</file>
+        <file alias="themes/qet/16x16/arrow-left.png">16x16/arrow-left.png</file>
+        <file alias="themes/qet/16x16/arrow-right-double.png">16x16/arrow-right-double.png</file>
+        <file alias="themes/qet/16x16/arrow-right.png">16x16/arrow-right.png</file>
+        <file alias="themes/qet/16x16/circle.png">16x16/circle.png</file>
+        <file alias="themes/qet/16x16/conductor-edit.png">16x16/conductor-edit.png</file>
+        <file alias="themes/qet/16x16/conductor-reset.png">16x16/conductor-reset.png</file>
+        <file alias="themes/qet/16x16/conductor.png">16x16/conductor.png</file>
+        <file alias="themes/qet/16x16/configure-toolbars.png">16x16/configure-toolbars.png</file>
+        <file alias="themes/qet/16x16/configure.png">16x16/configure.png</file>
+        <file alias="themes/qet/16x16/diagram.png">16x16/diagram.png</file>
+        <file alias="themes/qet/16x16/dialog-cancel.png">16x16/dialog-cancel.png</file>
+        <file alias="themes/qet/16x16/dialog-ok.png">16x16/dialog-ok.png</file>
+        <file alias="themes/qet/16x16/document-close.png">16x16/document-close.png</file>
+        <file alias="themes/qet/16x16/document-export.png">16x16/document-export.png</file>
+        <file alias="themes/qet/16x16/document-import.png">16x16/document-import.png</file>
+        <file alias="themes/qet/16x16/document-new.png">16x16/document-new.png</file>
+        <file alias="themes/qet/16x16/document-open-recent.png">16x16/document-open-recent.png</file>
+        <file alias="themes/qet/16x16/document-open.png">16x16/document-open.png</file>
+        <file alias="themes/qet/16x16/document-print-frame.png">16x16/document-print-frame.png</file>
+        <file alias="themes/qet/16x16/document-print.png">16x16/document-print.png</file>
+        <file alias="themes/qet/16x16/document-save-all.png">16x16/document-save-all.png</file>
+        <file alias="themes/qet/16x16/document-save-as.png">16x16/document-save-as.png</file>
+        <file alias="themes/qet/16x16/document-save.png">16x16/document-save.png</file>
+        <file alias="themes/qet/16x16/east.png">16x16/east.png</file>
+        <file alias="themes/qet/16x16/edit-clear-locationbar-ltr.png">16x16/edit-clear-locationbar-ltr.png</file>
+        <file alias="themes/qet/16x16/edit-clear-locationbar-rtl.png">16x16/edit-clear-locationbar-rtl.png</file>
+        <file alias="themes/qet/16x16/edit-clear.png">16x16/edit-clear.png</file>
+        <file alias="themes/qet/16x16/edit-copy.png">16x16/edit-copy.png</file>
+        <file alias="themes/qet/16x16/edit-cut.png">16x16/edit-cut.png</file>
+        <file alias="themes/qet/16x16/edit-delete.png">16x16/edit-delete.png</file>
+        <file alias="themes/qet/16x16/edit-download.png">16x16/edit-download.png</file>
+        <file alias="themes/qet/16x16/edit-paste.png">16x16/edit-paste.png</file>
+        <file alias="themes/qet/16x16/edit-redo.png">16x16/edit-redo.png</file>
+        <file alias="themes/qet/16x16/edit-rename.png">16x16/edit-rename.png</file>
+        <file alias="themes/qet/16x16/edit-select-all.png">16x16/edit-select-all.png</file>
+        <file alias="themes/qet/16x16/edit-select-invert.png">16x16/edit-select-invert.png</file>
+        <file alias="themes/qet/16x16/edit-select-none.png">16x16/edit-select-none.png</file>
+        <file alias="themes/qet/16x16/edit-table-cell-merge.png">16x16/edit-table-cell-merge.png</file>
+        <file alias="themes/qet/16x16/edit-table-cell-split.png">16x16/edit-table-cell-split.png</file>
+        <file alias="themes/qet/16x16/edit-table-delete-column.png">16x16/edit-table-delete-column.png</file>
+        <file alias="themes/qet/16x16/edit-table-delete-row.png">16x16/edit-table-delete-row.png</file>
+        <file alias="themes/qet/16x16/edit-table-insert-column-left.png">16x16/edit-table-insert-column-left.png</file>
+        <file alias="themes/qet/16x16/edit-table-insert-column-right.png">16x16/edit-table-insert-column-right.png</file>
+        <file alias="themes/qet/16x16/edit-table-insert-row-above.png">16x16/edit-table-insert-row-above.png</file>
+        <file alias="themes/qet/16x16/edit-table-insert-row-under.png">16x16/edit-table-insert-row-under.png</file>
+        <file alias="themes/qet/16x16/edit-undo.png">16x16/edit-undo.png</file>
+        <file alias="themes/qet/16x16/element-delete.png">16x16/element-delete.png</file>
+        <file alias="themes/qet/16x16/element-edit.png">16x16/element-edit.png</file>
+        <file alias="themes/qet/16x16/element-master.png">16x16/element-master.png</file>
+        <file alias="themes/qet/16x16/element-new.png">16x16/element-new.png</file>
+        <file alias="themes/qet/16x16/element-slave.png">16x16/element-slave.png</file>
+        <file alias="themes/qet/16x16/element.png">16x16/element.png</file>
+        <file alias="themes/qet/16x16/endline-circle.png">16x16/endline-circle.png</file>
+        <file alias="themes/qet/16x16/endline-diamond.png">16x16/endline-diamond.png</file>
+        <file alias="themes/qet/16x16/endline-none.png">16x16/endline-none.png</file>
+        <file alias="themes/qet/16x16/endline-simple.png">16x16/endline-simple.png</file>
+        <file alias="themes/qet/16x16/endline-triangle.png">16x16/endline-triangle.png</file>
+        <file alias="themes/qet/16x16/export-csv.png">16x16/export-csv.png</file>
+        <file alias="themes/qet/16x16/flip.png">16x16/flip.png</file>
+        <file alias="themes/qet/16x16/folder-delete.png">16x16/folder-delete.png</file>
+        <file alias="themes/qet/16x16/folder-edit.png">16x16/folder-edit.png</file>
+        <file alias="themes/qet/16x16/folder-new.png">16x16/folder-new.png</file>
+        <file alias="themes/qet/16x16/folder-only-this.png">16x16/folder-only-this.png</file>
+        <file alias="themes/qet/16x16/folder-open.png">16x16/folder-open.png</file>
+        <file alias="themes/qet/16x16/folder-properties.png">16x16/folder-properties.png</file>
+        <file alias="themes/qet/16x16/folder-show-all.png">16x16/folder-show-all.png</file>
+        <file alias="themes/qet/16x16/folder.png">16x16/folder.png</file>
+        <file alias="themes/qet/16x16/folio-delete.png">16x16/folio-delete.png</file>
+        <file alias="themes/qet/16x16/folio-new.png">16x16/folio-new.png</file>
+        <file alias="themes/qet/16x16/folio-properties.png">16x16/folio-properties.png</file>
+        <file alias="themes/qet/16x16/folio-ref-coming.png">16x16/folio-ref-coming.png</file>
+        <file alias="themes/qet/16x16/go-bottom.png">16x16/go-bottom.png</file>
+        <file alias="themes/qet/16x16/go-company.png">16x16/go-company.png</file>
+        <file alias="themes/qet/16x16/go-down-double.png">16x16/go-down-double.png</file>
+        <file alias="themes/qet/16x16/go-down.png">16x16/go-down.png</file>
+        <file alias="themes/qet/16x16/go-home.png">16x16/go-home.png</file>
+        <file alias="themes/qet/16x16/go-top.png">16x16/go-top.png</file>
+        <file alias="themes/qet/16x16/go-up-double.png">16x16/go-up-double.png</file>
+        <file alias="themes/qet/16x16/go-up.png">16x16/go-up.png</file>
+        <file alias="themes/qet/16x16/grid.png">16x16/grid.png</file>
+        <file alias="themes/qet/16x16/ground.png">16x16/ground.png</file>
+        <file alias="themes/qet/16x16/help-contents.png">16x16/help-contents.png</file>
+        <file alias="themes/qet/16x16/help-donate.png">16x16/help-donate.png</file>
+        <file alias="themes/qet/16x16/item-cancel.png">16x16/item-cancel.png</file>
+        <file alias="themes/qet/16x16/item-copy.png">16x16/item-copy.png</file>
+        <file alias="themes/qet/16x16/item-move.png">16x16/item-move.png</file>
+        <file alias="themes/qet/16x16/kdenlive-show-video.png">16x16/kdenlive-show-video.png</file>
+        <file alias="themes/qet/16x16/label.png">16x16/label.png</file>
+        <file alias="themes/qet/16x16/list-add.png">16x16/list-add.png</file>
+        <file alias="themes/qet/16x16/list-remove.png">16x16/list-remove.png</file>
+        <file alias="themes/qet/16x16/masquer.png">16x16/masquer.png</file>
+        <file alias="themes/qet/16x16/mirror.png">16x16/mirror.png</file>
+        <file alias="themes/qet/16x16/move.png">16x16/move.png</file>
+        <file alias="themes/qet/16x16/neutral.png">16x16/neutral.png</file>
+        <file alias="themes/qet/16x16/north.png">16x16/north.png</file>
+        <file alias="themes/qet/16x16/object-group.png">16x16/object-group.png</file>
+        <file alias="themes/qet/16x16/object-rotate-right.png">16x16/object-rotate-right.png</file>
+        <file alias="themes/qet/16x16/orientations.png">16x16/orientations.png</file>
+        <file alias="themes/qet/16x16/phase.png">16x16/phase.png</file>
+        <file alias="themes/qet/16x16/preferences-desktop-user.png">16x16/preferences-desktop-user.png</file>
+        <file alias="themes/qet/16x16/project-close.png">16x16/project-close.png</file>
+        <file alias="themes/qet/16x16/project-delete.png">16x16/project-delete.png</file>
+        <file alias="themes/qet/16x16/project-new.png">16x16/project-new.png</file>
+        <file alias="themes/qet/16x16/project-properties.png">16x16/project-properties.png</file>
+        <file alias="themes/qet/16x16/project.png">16x16/project.png</file>
+        <file alias="themes/qet/16x16/qet.png">16x16/qet.png</file>
+        <file alias="themes/qet/16x16/qt.png">16x16/qt.png</file>
+        <file alias="themes/qet/16x16/run-dxf.png">16x16/run-dxf.png</file>
+        <file alias="themes/qet/16x16/select.png">16x16/select.png</file>
+        <file alias="themes/qet/16x16/south.png">16x16/south.png</file>
+        <file alias="themes/qet/16x16/table-of-content.png">16x16/table-of-content.png</file>
+        <file alias="themes/qet/16x16/terminal.png">16x16/terminal.png</file>
+        <file alias="themes/qet/16x16/terminalstrip.png">16x16/terminalstrip.png</file>
+        <file alias="themes/qet/16x16/text-xml.png">16x16/text-xml.png</file>
+        <file alias="themes/qet/16x16/transform-rotate.png">16x16/transform-rotate.png</file>
+        <file alias="themes/qet/16x16/user-busy.png">16x16/user-busy.png</file>
+        <file alias="themes/qet/16x16/user-online.png">16x16/user-online.png</file>
+        <file alias="themes/qet/16x16/view-fullscreen.png">16x16/view-fullscreen.png</file>
+        <file alias="themes/qet/16x16/view-refresh.png">16x16/view-refresh.png</file>
+        <file alias="themes/qet/16x16/view-restore.png">16x16/view-restore.png</file>
+        <file alias="themes/qet/16x16/west.png">16x16/west.png</file>
+        <file alias="themes/qet/16x16/window-new.png">16x16/window-new.png</file>
+        <file alias="themes/qet/16x16/zoom-draw.png">16x16/zoom-draw.png</file>
+        <file alias="themes/qet/16x16/zoom-fit-best.png">16x16/zoom-fit-best.png</file>
+        <file alias="themes/qet/16x16/zoom-in.png">16x16/zoom-in.png</file>
+        <file alias="themes/qet/16x16/zoom-original.png">16x16/zoom-original.png</file>
+        <file alias="themes/qet/16x16/zoom-out.png">16x16/zoom-out.png</file>
+        <file alias="themes/qet/22x22/Actions-player-time-icon.png">22x22/Actions-player-time-icon.png</file>
+        <file alias="themes/qet/22x22/all_pages.png">22x22/all_pages.png</file>
+        <file alias="themes/qet/22x22/application-exit.png">22x22/application-exit.png</file>
+        <file alias="themes/qet/22x22/applications-development-translation.png">22x22/applications-development-translation.png</file>
+        <file alias="themes/qet/22x22/arc.png">22x22/arc.png</file>
+        <file alias="themes/qet/22x22/arrow-left-double.png">22x22/arrow-left-double.png</file>
+        <file alias="themes/qet/22x22/arrow-left.png">22x22/arrow-left.png</file>
+        <file alias="themes/qet/22x22/arrow-right-double.png">22x22/arrow-right-double.png</file>
+        <file alias="themes/qet/22x22/arrow-right.png">22x22/arrow-right.png</file>
+        <file alias="themes/qet/22x22/autoconnect.png">22x22/autoconnect.png</file>
+        <file alias="themes/qet/22x22/bring_forward.png">22x22/bring_forward.png</file>
+        <file alias="themes/qet/22x22/conductor2.png">22x22/conductor2.png</file>
+        <file alias="themes/qet/22x22/conductor-reset.png">22x22/conductor2.png</file>
+        <file alias="themes/qet/22x22/configure-toolbars.png">22x22/configure-toolbars.png</file>
+        <file alias="themes/qet/22x22/configure.png">22x22/configure.png</file>
+        <file alias="themes/qet/22x22/diagram.png">22x22/diagram.png</file>
+        <file alias="themes/qet/22x22/diagram_add.png">22x22/diagram_add.png</file>
+        <file alias="themes/qet/22x22/folio-new.png">22x22/diagram_add.png</file>
+        <file alias="themes/qet/22x22/diagram_bg.png">22x22/diagram_bg.png</file>
+        <file alias="themes/qet/22x22/diagram_del.png">22x22/diagram_del.png</file>
+        <file alias="themes/qet/22x22/folio-delete.png">22x22/diagram_del.png</file>
+        <file alias="themes/qet/22x22/dialog-cancel.png">22x22/dialog-cancel.png</file>
+        <file alias="themes/qet/22x22/dialog-information.png">22x22/dialog-information.png</file>
+        <file alias="themes/qet/22x22/folio-properties.png">22x22/dialog-information.png</file>
+        <file alias="themes/qet/22x22/dialog-ok.png">22x22/dialog-ok.png</file>
+        <file alias="themes/qet/22x22/document-close.png">22x22/document-close.png</file>
+        <file alias="themes/qet/22x22/document-export.png">22x22/document-export.png</file>
+        <file alias="themes/qet/22x22/document-import.png">22x22/document-import.png</file>
+        <file alias="themes/qet/22x22/document-new.png">22x22/document-new.png</file>
+        <file alias="themes/qet/22x22/document-open-recent.png">22x22/document-open-recent.png</file>
+        <file alias="themes/qet/22x22/document-open.png">22x22/document-open.png</file>
+        <file alias="themes/qet/22x22/document-print-frame.png">22x22/document-print-frame.png</file>
+        <file alias="themes/qet/22x22/document-print.png">22x22/document-print.png</file>
+        <file alias="themes/qet/22x22/document-save-all.png">22x22/document-save-all.png</file>
+        <file alias="themes/qet/22x22/document-save-as.png">22x22/document-save-as.png</file>
+        <file alias="themes/qet/22x22/document-save.png">22x22/document-save.png</file>
+        <file alias="themes/qet/22x22/edit-clear-locationbar-ltr.png">22x22/edit-clear-locationbar-ltr.png</file>
+        <file alias="themes/qet/22x22/edit-clear-locationbar-rtl.png">22x22/edit-clear-locationbar-rtl.png</file>
+        <file alias="themes/qet/22x22/edit-clear.png">22x22/edit-clear.png</file>
+        <file alias="themes/qet/22x22/edit-copy.png">22x22/edit-copy.png</file>
+        <file alias="themes/qet/22x22/edit-cut.png">22x22/edit-cut.png</file>
+        <file alias="themes/qet/22x22/edit-delete.png">22x22/edit-delete.png</file>
+        <file alias="themes/qet/22x22/edit-paste.png">22x22/edit-paste.png</file>
+        <file alias="themes/qet/22x22/edit-redo.png">22x22/edit-redo.png</file>
+        <file alias="themes/qet/22x22/edit-rename.png">22x22/edit-rename.png</file>
+        <file alias="themes/qet/22x22/edit-select-all.png">22x22/edit-select-all.png</file>
+        <file alias="themes/qet/22x22/edit-table-cell-merge.png">22x22/edit-table-cell-merge.png</file>
+        <file alias="themes/qet/22x22/edit-table-cell-split.png">22x22/edit-table-cell-split.png</file>
+        <file alias="themes/qet/22x22/edit-table-delete-column.png">22x22/edit-table-delete-column.png</file>
+        <file alias="themes/qet/22x22/edit-table-delete-row.png">22x22/edit-table-delete-row.png</file>
+        <file alias="themes/qet/22x22/edit-table-insert-column-left.png">22x22/edit-table-insert-column-left.png</file>
+        <file alias="themes/qet/22x22/edit-table-insert-column-right.png">22x22/edit-table-insert-column-right.png</file>
+        <file alias="themes/qet/22x22/edit-table-insert-row-above.png">22x22/edit-table-insert-row-above.png</file>
+        <file alias="themes/qet/22x22/edit-table-insert-row-under.png">22x22/edit-table-insert-row-under.png</file>
+        <file alias="themes/qet/22x22/edit-undo.png">22x22/edit-undo.png</file>
+        <file alias="themes/qet/22x22/element-delete.png">22x22/element-delete.png</file>
+        <file alias="themes/qet/22x22/element-edit.png">22x22/element-edit.png</file>
+        <file alias="themes/qet/22x22/element-new.png">22x22/element-new.png</file>
+        <file alias="themes/qet/22x22/ellipse.png">22x22/ellipse.png</file>
+        <file alias="themes/qet/22x22/export-csv.png">22x22/export-csv.png</file>
+        <file alias="themes/qet/22x22/folder-delete.png">22x22/folder-delete.png</file>
+        <file alias="themes/qet/22x22/folder-edit.png">22x22/folder-edit.png</file>
+        <file alias="themes/qet/22x22/folder-new.png">22x22/folder-new.png</file>
+        <file alias="themes/qet/22x22/folder-open.png">22x22/folder-open.png</file>
+        <file alias="themes/qet/22x22/format-text-subscript.png">22x22/format-text-subscript.png</file>
+        <file alias="themes/qet/22x22/format-text-superscript.png">22x22/format-text-superscript.png</file>
+        <file alias="themes/qet/22x22/go-company.png">22x22/go-company.png</file>
+        <file alias="themes/qet/22x22/go-down.png">22x22/go-down.png</file>
+        <file alias="themes/qet/22x22/go-home.png">22x22/go-home.png</file>
+        <file alias="themes/qet/22x22/go-up.png">22x22/go-up.png</file>
+        <file alias="themes/qet/22x22/grid.png">22x22/grid.png</file>
+        <file alias="themes/qet/22x22/guides.png">22x22/guides.png</file>
+        <file alias="themes/qet/22x22/hotspot.png">22x22/hotspot.png</file>
+        <file alias="themes/qet/22x22/insert-image.png">22x22/insert-image.png</file>
+        <file alias="themes/qet/22x22/label.png">22x22/label.png</file>
+        <file alias="themes/qet/22x22/landscape.png">22x22/landscape.png</file>
+        <file alias="themes/qet/22x22/line.png">22x22/line.png</file>
+        <file alias="themes/qet/22x22/list-add.png">22x22/list-add.png</file>
+        <file alias="themes/qet/22x22/list-remove.png">22x22/list-remove.png</file>
+        <file alias="themes/qet/22x22/lower.png">22x22/lower.png</file>
+        <file alias="themes/qet/22x22/move.png">22x22/move.png</file>
+        <file alias="themes/qet/22x22/names.png">22x22/names.png</file>
+        <file alias="themes/qet/22x22/object-locked.png">22x22/object-locked.png</file>
+        <file alias="themes/qet/22x22/object-rotate-right.png">22x22/object-rotate-right.png</file>
+        <file alias="themes/qet/22x22/object-unlocked.png">22x22/object-unlocked.png</file>
+        <file alias="themes/qet/22x22/pdf-import.png">22x22/pdf-import.png</file>
+        <file alias="themes/qet/22x22/polygon.png">22x22/polygon.png</file>
+        <file alias="themes/qet/22x22/portrait.png">22x22/portrait.png</file>
+        <file alias="themes/qet/22x22/preferences-desktop-user.png">22x22/preferences-desktop-user.png</file>
+        <file alias="themes/qet/22x22/project-close.png">22x22/project-close.png</file>
+        <file alias="themes/qet/22x22/project-delete.png">22x22/project-delete.png</file>
+        <file alias="themes/qet/22x22/project-new.png">22x22/project-new.png</file>
+        <file alias="themes/qet/22x22/project.png">22x22/project.png</file>
+        <file alias="themes/qet/22x22/raise.png">22x22/raise.png</file>
+        <file alias="themes/qet/22x22/rectangle.png">22x22/rectangle.png</file>
+        <file alias="themes/qet/22x22/restaurer.png">22x22/restaurer.png</file>
+        <file alias="themes/qet/22x22/select.png">22x22/select.png</file>
+        <file alias="themes/qet/22x22/send_backward.png">22x22/send_backward.png</file>
+        <file alias="themes/qet/22x22/single_page.png">22x22/single_page.png</file>
+        <file alias="themes/qet/22x22/start.png">22x22/start.png</file>
+        <file alias="themes/qet/22x22/terminal.png">22x22/terminal.png</file>
+        <file alias="themes/qet/22x22/terminalstrip.png">22x22/terminalstrip.png</file>
+        <file alias="themes/qet/22x22/text-xml.png">22x22/text-xml.png</file>
+        <file alias="themes/qet/22x22/text.png">22x22/text.png</file>
+        <file alias="themes/qet/22x22/textfield.png">22x22/textfield.png</file>
+        <file alias="themes/qet/22x22/titleblock-bottom.png">22x22/titleblock-bottom.png</file>
+        <file alias="themes/qet/22x22/titleblock-right.png">22x22/titleblock-right.png</file>
+        <file alias="themes/qet/22x22/transform-scale.png">22x22/transform-scale.png</file>
+        <file alias="themes/qet/22x22/two_pages.png">22x22/two_pages.png</file>
+        <file alias="themes/qet/22x22/view-fit-window.png">22x22/view-fit-window.png</file>
+        <file alias="themes/qet/22x22/view-fullscreen.png">22x22/view-fullscreen.png</file>
+        <file alias="themes/qet/22x22/view-refresh.png">22x22/view-refresh.png</file>
+        <file alias="themes/qet/22x22/view-restore.png">22x22/view-restore.png</file>
+        <file alias="themes/qet/22x22/view_fit_width.png">22x22/view_fit_width.png</file>
+        <file alias="themes/qet/22x22/window-new.png">22x22/window-new.png</file>
+        <file alias="themes/qet/22x22/zoom-draw.png">22x22/zoom-draw.png</file>
+        <file alias="themes/qet/22x22/zoom-fit-best.png">22x22/zoom-fit-best.png</file>
+        <file alias="themes/qet/22x22/zoom-in.png">22x22/zoom-in.png</file>
+        <file alias="themes/qet/22x22/zoom-original.png">22x22/zoom-original.png</file>
+        <file alias="themes/qet/22x22/zoom-out.png">22x22/zoom-out.png</file>
+        <file alias="themes/qet/32x32/application-pdf.png">32x32/application-pdf.png</file>
+        <file alias="themes/qet/32x32/format-text-bold.png">32x32/format-text-bold.png</file>
+        <file alias="themes/qet/32x32/format-text-color.png">32x32/format-text-color.png</file>
+        <file alias="themes/qet/32x32/format-text-italic.png">32x32/format-text-italic.png</file>
+        <file alias="themes/qet/32x32/format-text-underline.png">32x32/format-text-underline.png</file>
+        <file alias="themes/qet/32x32/image-x-eps.png">32x32/image-x-eps.png</file>
+        <file alias="themes/qet/32x32/insert-link.png">32x32/insert-link.png</file>
+        <file alias="themes/qet/32x32/printer.png">32x32/printer.png</file>
+        <file alias="themes/qet/32x32/qt.png">32x32/qt.png</file>
+        <file alias="themes/qet/32x32/simplifyrichtext.png">32x32/simplifyrichtext.png</file>
+        <file alias="themes/qet/32x32/text-xml.png">32x32/text-xml.png</file>
+        <file alias="themes/qet/48x48/document-print-frame.png">48x48/document-print-frame.png</file>
+        <file alias="themes/qet/48x48/user-away-extended.png">48x48/user-away-extended.png</file>
+        <file alias="themes/qet/48x48/user-away.png">48x48/user-away.png</file>
+        <file alias="themes/qet/48x48/view-pim-journal.png">48x48/view-pim-journal.png</file>
+        <file alias="themes/qet/128x128/diagram.png">128x128/diagram.png</file>
+        <file alias="themes/qet/128x128/document-export.png">128x128/document-export.png</file>
+        <file alias="themes/qet/128x128/plasmagik.png">128x128/plasmagik.png</file>
+        <file alias="themes/qet/128x128/printer.png">128x128/printer.png</file>
+        <file alias="themes/qet/128x128/project.png">128x128/project.png</file>
+        <file alias="themes/qet/128x128/settings.png">128x128/settings.png</file>
+        <file alias="themes/qet/scalable/edit-opacity.svg">breeze-icons/scalable/apps/hidef/edit-opacity.svg</file>
+        <file alias="themes/qet/scalable/image-flip-horizontal.svg">breeze-icons/scalable/apps/hidef/image-flip-horizontal-symbolic.svg</file>
+        <file alias="themes/qet/scalable/image-flip-vertical.svg">breeze-icons/scalable/apps/hidef/image-flip-vertical-symbolic.svg</file>
+        <file alias="themes/qet/scalable/draw-bezier-curves.svg">breeze-icons/scalable/apps/hidef/draw-bezier-curves.svg</file>
+        <file alias="themes/qet/scalable/transform-crop.svg">breeze-icons/scalable/apps/hidef/transform-crop.svg</file>
+        <file alias="themes/qet/scalable/ellipse-to-bezier.svg">generated/ellipse-to-bezier.svg</file>
+        <file alias="themes/qet/scalable/rect-to-bezier.svg">generated/rect-to-bezier.svg</file>
+        <file alias="themes/qet/scalable/rect-to-polyline.svg">generated/rect-to-polyline.svg</file>
+        <file>themes/qet-dark/16x16/arrow-left-double.png</file>
+        <file>themes/qet-dark/16x16/arrow-left.png</file>
+        <file>themes/qet-dark/16x16/arrow-right-double.png</file>
+        <file>themes/qet-dark/16x16/arrow-right.png</file>
+        <file>themes/qet-dark/16x16/circle.png</file>
+        <file>themes/qet-dark/16x16/conductor-edit.png</file>
+        <file>themes/qet-dark/16x16/configure-toolbars.png</file>
+        <file>themes/qet-dark/16x16/configure.png</file>
+        <file>themes/qet-dark/16x16/diagram.png</file>
+        <file>themes/qet-dark/16x16/dialog-cancel.png</file>
+        <file>themes/qet-dark/16x16/dialog-ok.png</file>
+        <file>themes/qet-dark/16x16/document-export.png</file>
+        <file>themes/qet-dark/16x16/document-import.png</file>
+        <file>themes/qet-dark/16x16/document-new.png</file>
+        <file>themes/qet-dark/16x16/document-open-recent.png</file>
+        <file>themes/qet-dark/16x16/document-print-frame.png</file>
+        <file>themes/qet-dark/16x16/document-print.png</file>
+        <file>themes/qet-dark/16x16/document-save-all.png</file>
+        <file>themes/qet-dark/16x16/document-save-as.png</file>
+        <file>themes/qet-dark/16x16/document-save.png</file>
+        <file>themes/qet-dark/16x16/edit-clear-locationbar-ltr.png</file>
+        <file>themes/qet-dark/16x16/edit-clear-locationbar-rtl.png</file>
+        <file>themes/qet-dark/16x16/edit-clear.png</file>
+        <file>themes/qet-dark/16x16/edit-copy.png</file>
+        <file>themes/qet-dark/16x16/edit-cut.png</file>
+        <file>themes/qet-dark/16x16/edit-download.png</file>
+        <file>themes/qet-dark/16x16/edit-paste.png</file>
+        <file>themes/qet-dark/16x16/edit-redo.png</file>
+        <file>themes/qet-dark/16x16/edit-rename.png</file>
+        <file>themes/qet-dark/16x16/edit-select-all.png</file>
+        <file>themes/qet-dark/16x16/edit-select-invert.png</file>
+        <file>themes/qet-dark/16x16/edit-table-cell-merge.png</file>
+        <file>themes/qet-dark/16x16/edit-undo.png</file>
+        <file>themes/qet-dark/16x16/element-delete.png</file>
+        <file>themes/qet-dark/16x16/element-edit.png</file>
+        <file>themes/qet-dark/16x16/element-new.png</file>
+        <file>themes/qet-dark/16x16/element.png</file>
+        <file>themes/qet-dark/16x16/endline-circle.png</file>
+        <file>themes/qet-dark/16x16/endline-diamond.png</file>
+        <file>themes/qet-dark/16x16/endline-none.png</file>
+        <file>themes/qet-dark/16x16/endline-simple.png</file>
+        <file>themes/qet-dark/16x16/endline-triangle.png</file>
+        <file>themes/qet-dark/16x16/flip.png</file>
+        <file>themes/qet-dark/16x16/folder-delete.png</file>
+        <file>themes/qet-dark/16x16/folder-edit.png</file>
+        <file>themes/qet-dark/16x16/folder-new.png</file>
+        <file>themes/qet-dark/16x16/folder-open.png</file>
+        <file>themes/qet-dark/16x16/folder-show-all.png</file>
+        <file>themes/qet-dark/16x16/folder.png</file>
+        <file>themes/qet-dark/16x16/folio-delete.png</file>
+        <file>themes/qet-dark/16x16/folio-new.png</file>
+        <file>themes/qet-dark/16x16/folio-properties.png</file>
+        <file>themes/qet-dark/16x16/folio-ref-coming.png</file>
+        <file>themes/qet-dark/16x16/go-company.png</file>
+        <file>themes/qet-dark/16x16/go-down-double.png</file>
+        <file>themes/qet-dark/16x16/go-down.png</file>
+        <file>themes/qet-dark/16x16/go-home.png</file>
+        <file>themes/qet-dark/16x16/go-up-double.png</file>
+        <file>themes/qet-dark/16x16/go-up.png</file>
+        <file>themes/qet-dark/16x16/grid.png</file>
+        <file>themes/qet-dark/16x16/help-contents.png</file>
+        <file>themes/qet-dark/16x16/help-donate.png</file>
+        <file>themes/qet-dark/16x16/item-cancel.png</file>
+        <file>themes/qet-dark/16x16/item-copy.png</file>
+        <file>themes/qet-dark/16x16/item-move.png</file>
+        <file>themes/qet-dark/16x16/kdenlive-show-video.png</file>
+        <file>themes/qet-dark/16x16/label.png</file>
+        <file>themes/qet-dark/16x16/list-add.png</file>
+        <file>themes/qet-dark/16x16/list-remove.png</file>
+        <file>themes/qet-dark/16x16/masquer.png</file>
+        <file>themes/qet-dark/16x16/mirror.png</file>
+        <file>themes/qet-dark/16x16/move.png</file>
+        <file>themes/qet-dark/16x16/object-group.png</file>
+        <file>themes/qet-dark/16x16/object-rotate-right.png</file>
+        <file>themes/qet-dark/16x16/orientations.png</file>
+        <file>themes/qet-dark/16x16/preferences-desktop-user.png</file>
+        <file>themes/qet-dark/16x16/select.png</file>
+        <file>themes/qet-dark/16x16/table-of-content.png</file>
+        <file>themes/qet-dark/16x16/terminal.png</file>
+        <file>themes/qet-dark/16x16/text-xml.png</file>
+        <file>themes/qet-dark/16x16/transform-rotate.png</file>
+        <file>themes/qet-dark/16x16/view-fullscreen.png</file>
+        <file>themes/qet-dark/16x16/view-restore.png</file>
+        <file>themes/qet-dark/16x16/window-new.png</file>
+        <file>themes/qet-dark/16x16/zoom-draw.png</file>
+        <file>themes/qet-dark/16x16/zoom-fit-best.png</file>
+        <file>themes/qet-dark/16x16/zoom-in.png</file>
+        <file>themes/qet-dark/16x16/zoom-original.png</file>
+        <file>themes/qet-dark/16x16/zoom-out.png</file>
+        <file>themes/qet-dark/22x22/Actions-player-time-icon.png</file>
+        <file>themes/qet-dark/22x22/all_pages.png</file>
+        <file>themes/qet-dark/22x22/applications-development-translation.png</file>
+        <file>themes/qet-dark/22x22/arc.png</file>
+        <file>themes/qet-dark/22x22/arrow-left-double.png</file>
+        <file>themes/qet-dark/22x22/arrow-left.png</file>
+        <file>themes/qet-dark/22x22/arrow-right-double.png</file>
+        <file>themes/qet-dark/22x22/arrow-right.png</file>
+        <file>themes/qet-dark/22x22/configure-toolbars.png</file>
+        <file>themes/qet-dark/22x22/configure.png</file>
+        <file>themes/qet-dark/22x22/diagram.png</file>
+        <file>themes/qet-dark/22x22/diagram_add.png</file>
+        <file>themes/qet-dark/22x22/folio-new.png</file>
+        <file>themes/qet-dark/22x22/diagram_bg.png</file>
+        <file>themes/qet-dark/22x22/diagram_del.png</file>
+        <file>themes/qet-dark/22x22/folio-delete.png</file>
+        <file>themes/qet-dark/22x22/dialog-cancel.png</file>
+        <file>themes/qet-dark/22x22/dialog-information.png</file>
+        <file>themes/qet-dark/22x22/folio-properties.png</file>
+        <file>themes/qet-dark/22x22/dialog-ok.png</file>
+        <file>themes/qet-dark/22x22/document-export.png</file>
+        <file>themes/qet-dark/22x22/document-import.png</file>
+        <file>themes/qet-dark/22x22/document-new.png</file>
+        <file>themes/qet-dark/22x22/document-open-recent.png</file>
+        <file>themes/qet-dark/22x22/document-print-frame.png</file>
+        <file>themes/qet-dark/22x22/document-print.png</file>
+        <file>themes/qet-dark/22x22/document-save-all.png</file>
+        <file>themes/qet-dark/22x22/document-save-as.png</file>
+        <file>themes/qet-dark/22x22/document-save.png</file>
+        <file>themes/qet-dark/22x22/edit-clear-locationbar-ltr.png</file>
+        <file>themes/qet-dark/22x22/edit-clear-locationbar-rtl.png</file>
+        <file>themes/qet-dark/22x22/edit-clear.png</file>
+        <file>themes/qet-dark/22x22/edit-copy.png</file>
+        <file>themes/qet-dark/22x22/edit-cut.png</file>
+        <file>themes/qet-dark/22x22/edit-paste.png</file>
+        <file>themes/qet-dark/22x22/edit-redo.png</file>
+        <file>themes/qet-dark/22x22/edit-rename.png</file>
+        <file>themes/qet-dark/22x22/edit-select-all.png</file>
+        <file>themes/qet-dark/22x22/edit-table-cell-merge.png</file>
+        <file>themes/qet-dark/22x22/edit-undo.png</file>
+        <file>themes/qet-dark/22x22/element-delete.png</file>
+        <file>themes/qet-dark/22x22/element-edit.png</file>
+        <file>themes/qet-dark/22x22/element-new.png</file>
+        <file>themes/qet-dark/22x22/ellipse.png</file>
+        <file>themes/qet-dark/22x22/folder-delete.png</file>
+        <file>themes/qet-dark/22x22/folder-edit.png</file>
+        <file>themes/qet-dark/22x22/folder-new.png</file>
+        <file>themes/qet-dark/22x22/folder-open.png</file>
+        <file>themes/qet-dark/22x22/go-company.png</file>
+        <file>themes/qet-dark/22x22/go-down.png</file>
+        <file>themes/qet-dark/22x22/go-home.png</file>
+        <file>themes/qet-dark/22x22/go-up.png</file>
+        <file>themes/qet-dark/22x22/grid.png</file>
+        <file>themes/qet-dark/22x22/insert-image.png</file>
+        <file>themes/qet-dark/22x22/label.png</file>
+        <file>themes/qet-dark/22x22/landscape.png</file>
+        <file>themes/qet-dark/22x22/line.png</file>
+        <file>themes/qet-dark/22x22/list-add.png</file>
+        <file>themes/qet-dark/22x22/list-remove.png</file>
+        <file>themes/qet-dark/22x22/lower.png</file>
+        <file>themes/qet-dark/22x22/move.png</file>
+        <file>themes/qet-dark/22x22/names.png</file>
+        <file>themes/qet-dark/22x22/object-locked.png</file>
+        <file>themes/qet-dark/22x22/object-rotate-right.png</file>
+        <file>themes/qet-dark/22x22/object-unlocked.png</file>
+        <file>themes/qet-dark/22x22/pdf-import.png</file>
+        <file>themes/qet-dark/22x22/polygon.png</file>
+        <file>themes/qet-dark/22x22/portrait.png</file>
+        <file>themes/qet-dark/22x22/preferences-desktop-user.png</file>
+        <file>themes/qet-dark/22x22/raise.png</file>
+        <file>themes/qet-dark/22x22/rectangle.png</file>
+        <file>themes/qet-dark/22x22/restaurer.png</file>
+        <file>themes/qet-dark/22x22/select.png</file>
+        <file>themes/qet-dark/22x22/single_page.png</file>
+        <file>themes/qet-dark/22x22/start.png</file>
+        <file>themes/qet-dark/22x22/text-xml.png</file>
+        <file>themes/qet-dark/22x22/text.png</file>
+        <file>themes/qet-dark/22x22/textfield.png</file>
+        <file>themes/qet-dark/22x22/transform-scale.png</file>
+        <file>themes/qet-dark/22x22/two_pages.png</file>
+        <file>themes/qet-dark/22x22/view-fit-window.png</file>
+        <file>themes/qet-dark/22x22/view-fullscreen.png</file>
+        <file>themes/qet-dark/22x22/view-restore.png</file>
+        <file>themes/qet-dark/22x22/view_fit_width.png</file>
+        <file>themes/qet-dark/22x22/window-new.png</file>
+        <file>themes/qet-dark/22x22/zoom-draw.png</file>
+        <file>themes/qet-dark/22x22/zoom-fit-best.png</file>
+        <file>themes/qet-dark/22x22/zoom-in.png</file>
+        <file>themes/qet-dark/22x22/zoom-original.png</file>
+        <file>themes/qet-dark/22x22/zoom-out.png</file>
+        <file>themes/qet-dark/32x32/format-text-bold.png</file>
+        <file>themes/qet-dark/32x32/format-text-color.png</file>
+        <file>themes/qet-dark/32x32/format-text-italic.png</file>
+        <file>themes/qet-dark/32x32/format-text-underline.png</file>
+        <file>themes/qet-dark/32x32/insert-link.png</file>
+        <file>themes/qet-dark/32x32/printer.png</file>
+        <file>themes/qet-dark/32x32/text-xml.png</file>
+        <file>themes/qet-dark/48x48/user-away-extended.png</file>
+        <file>themes/qet-dark/48x48/user-away.png</file>
+        <file>themes/qet-dark/48x48/view-pim-journal.png</file>
+        <file>themes/qet-dark/128x128/plasmagik.png</file>
+        <file>themes/qet-dark/128x128/printer.png</file>
+        <file>themes/qet-dark/128x128/settings.png</file>
+        <file>themes/qet-dark/scalable/edit-opacity.svg</file>
+        <file>themes/qet-dark/scalable/image-flip-horizontal.svg</file>
+        <file>themes/qet-dark/scalable/image-flip-vertical.svg</file>
+        <file>themes/qet-dark/scalable/draw-bezier-curves.svg</file>
+        <file>themes/qet-dark/scalable/transform-crop.svg</file>
+        <file>themes/qet-dark/scalable/ellipse-to-bezier.svg</file>
+        <file>themes/qet-dark/scalable/rect-to-bezier.svg</file>
+        <file>themes/qet-dark/scalable/rect-to-polyline.svg</file>
+    </qresource>
+</RCC>